Currently browsing: Items authored or edited by Yadunandan Das

Das, Yadunandan; Fernandez-Caballero, Antonio; Elmukashfi, Elsiddig; Jazaeri, Hedieh; Forsey, Alex; Hutchings, Michael T.; Schweins, Ralf and Bouchard, P. John (2022). Stress driven creep deformation and cavitation damage in pure copper. Materials Science and Engineering: A, 833, article no. 142543.

Das, Yadunandan; Liu, Jianling; Ehteshami, Hossein; Odqvist, Joakim; Holländer Pettersson, Niklas; Wessman, Sten; King, Stephen and Hedström, Peter (2021). Quantitative Nanostructure and Hardness Evolution in Duplex Stainless Steels: Under Real Low-Temperature Service Conditions. Metallurgical and Materials Transactions A, 53 pp. 723–735.

• Download Published Version (PDF / 5MB)

Das, Yadunandan; Liu, Jianling; Wessman, Sten; Xu, Xin; Odqvist, Joakim; King, Stephen and Hedström, Peter (2020). Small-angle neutron scattering quantification of phase separation and the corresponding embrittlement of a super duplex stainless steel after long-term aging at 300°C. Materialia, 12, article no. 100771.

• Download Published Version (PDF / 8MB)

Das, Yadunandan B.; Forsey, Alexander N.; Kelleher, Joe; Kabra, Saurabh; Fitzpatrick, Michael E.; Simm, Thomas H.; Gungor, Salih and Moat, Richard J. (2018). The influence of temperature on deformation-induced martensitic transformation in 301 stainless steel. Materials Science and Technology, 34(17) pp. 2114–2125.

• Download Accepted Manuscript (PDF / 1MB)

Das, Yadunandan (2017). Characterization of Stresses and Strains Involved in the Martensitic Phase Transformations. PhD thesis The Open University.

• Download Final Version (PDF / 11MB)

Das, Yadunandan B.; Forsey, Alexander N.; Simm, Thomas H.; Perkins, Karen M.; Fitzpatrick, Michael E.; Gungor, Salih and Moat, Richard J. (2016). In situ observation of strain and phase transformation in plastically deformed 301 austenitic stainless steel. Materials & Design, 112 pp. 107–116.

• Download Accepted Manuscript (PDF / 2MB)

Forsey, Alex; Das, Yadunandan; Simm, Thomas H.; Clark, Dan; Boswell, John; Gungor, Salih and Moat, Richard (2018). Mechanical Property Heterogeneity in Additively Manufactured Nickel Superalloy. Materials Science and Engineering A, 712 pp. 681–684.

• Download Accepted Manuscript (PDF / 4MB)

Gajjar, Pradip K.; Khatri, Bharat C.; Das, Yadunandan and Moat, Richard (2024). Mechanical and intergranular corrosion properties of auto TIG welded TP347H-T91 dissimilar weldme. Materials Science and Technology, 40(7) pp. 503–516.

• Download Accepted Manuscript (PDF / 11MB)

Liu, Jianling; Das, Yadunandan; Babu, R. Prasath; Wessman, Sten; Jonsson, Jan Y.; Odqvist, Joakim; King, Stephen M. and Hedström, Peter (2022). Small-angle neutron scattering study on phase separation in a super duplex stainless steel at 300 °C – Comparing hot-rolled and TIG welded material. Materials Characterization, 190, article no. 112044.

• Download Published Version (PDF / 3MB)

Liu, Jianling; Das, Yadunandan; King, Stephen M.; Jonsson, Jan Y.; Wessman, Sten and Hedström, Peter (2022). Effect of Cooling Rate after Solution Treatment on Subsequent Phase Separation Evolution in Super Duplex Stainless Steel 25Cr-7Ni (wt.%). Metals, 12(5) p. 890.

• Download Published Version (PDF / 3MB)

Simm, T. H.; Das, Y. B.; Forsey, A. N.; Gungor, S.; Fitzpatrick, M. E.; Prakash, D. G. L.; Moat, R. J.; Birosca, S.; da Fonseca, J. Quinta and Perkins, K. M. (2020). The τ-plot, a multicomponent 1-D pole figure plot, to quantify the heterogeneity of plastic deformation. Materials Characterization, 160, article no. 110114.

• Download Accepted Manuscript (PDF / 4MB)