Currently browsing: Items authored or edited by Salih Gungor

Rooyen, Melody; Forsey, Alexander N.; Gungor, Salih and Becker, Thorsten H. (2022). Creep deformation measurement of ex‐service 12% Cr steel over nonuniform stress fields using digital image correlation. Strain, 58(1), article no. e12400.

Perumal, Bama; Gungor, Salih; Kockelmann, W.; Fitzpatrick, Michael E. and Bhavani, P. (2021). Texture Evolution during Thermal Processing of Ti-6Al-4V: A Neutron Diffraction Study. SVOA Materials Science and Technology, 3(2) pp. 13–23.

• Download Published Version (PDF / 1MB)

Simm, T. H.; Das, Y. B.; Forsey, A. N.; Gungor, S.; Fitzpatrick, M. E.; Prakash, D. G. L.; Moat, R. J.; Birosca, S.; da Fonseca, J. Quinta and Perkins, K. M. (2020). The τ-plot, a multicomponent 1-D pole figure plot, to quantify the heterogeneity of plastic deformation. Materials Characterization, 160, article no. 110114.

• Download Accepted Manuscript (PDF / 4MB)

Abburi Venkata, K.; Khayatzadeh, S.; Achouri, A.; de Oliveira, J. Araujo; Forsey, A. N.; Gungor, S.; Bouchard, P. J. and Truman, C. E. (2018). Examining Stress Relaxation in a Dissimilar Metal Weld Subjected to Postweld Heat Treatment. Materials Performance and Characterization, 7(4) pp. 675–692.

• Download Accepted Manuscript (PDF / 1MB)

Forsey, Alex; Das, Yadunandan; Simm, Thomas H.; Clark, Dan; Boswell, John; Gungor, Salih and Moat, Richard (2018). Mechanical Property Heterogeneity in Additively Manufactured Nickel Superalloy. Materials Science and Engineering A, 712 pp. 681–684.

• Download Accepted Manuscript (PDF / 4MB)

Das, Yadunandan B.; Forsey, Alexander N.; Kelleher, Joe; Kabra, Saurabh; Fitzpatrick, Michael E.; Simm, Thomas H.; Gungor, Salih and Moat, Richard J. (2018). The influence of temperature on deformation-induced martensitic transformation in 301 stainless steel. Materials Science and Technology, 34(17) pp. 2114–2125.

• Download Accepted Manuscript (PDF / 1MB)

Javadi, Y.; Smith, M.C.; Abburi Venkata, K.; Naveed, N.; Forsey, A.N.; Francis, J.A.; Ainsworth, R.A.; Truman, C.E.; Smith, D.J.; Hosseinzadeh, F.; Gungor, S.; Bouchard, P. J.; Dey, H.C.; Bhaduri, A.K. and Mahadevan, S. (2017). Residual stress measurement round robin on an electron beam welded joint between austenitic stainless steel 316L(N) and ferritic steel P91. International Journal of Pressure Vessels and Piping, 154 pp. 41–57.

• Download Published Version (PDF / 6MB)

Sakanashi, Y.; Gungor, S.; Forsey, A. N. and Bouchard, P. J. (2017). Measurement of Creep Deformation across Welds in 316H Stainless Steel Using Digital Image Correlation. Experimental Mechanics, 57(2) pp. 231–244.

• Download Published Version (PDF / 3MB)

Das, Yadunandan B.; Forsey, Alexander N.; Simm, Thomas H.; Perkins, Karen M.; Fitzpatrick, Michael E.; Gungor, Salih and Moat, Richard J. (2016). In situ observation of strain and phase transformation in plastically deformed 301 austenitic stainless steel. Materials & Design, 112 pp. 107–116.

• Download Accepted Manuscript (PDF / 2MB)

Forsey, A. and Gungor, S. (2016). Demosaicing images from colour cameras for digital image correlation. Optics and lasers in engineering, 86 pp. 20–28.

• Download Accepted Manuscript (PDF / 3MB)

Perumal, Bama; Rist, Martin A.; Gungor, Salih; Brooks, Jeffery W. and Fitzpatrick, Michael E. (2016). The Effect of Hot Deformation Parameters on Microstructure Evolution of the α-Phase in Ti-6Al-4V. Metallurgical and Materials Transactions A, 47(8) pp. 4128–4136.

• Download Published Version (PDF / 4MB)

Araujo de Oliveira, J.; Kowal, J.; Gungor, S. and Fitzpatrick, M. E. (2015). Determination of normal and shear residual stresses from fracture surface mismatch. Materials & Design, 83(C) pp. 176–184.

• Download Accepted Manuscript (PDF / 3MB)

Toparli, M. Burak; Fitzpatrick, Michael E. and Gungor, Salih (2015). Determination of multiple near-surface residual stress components in laser peened aluminum alloy via the contour method. Metallurgical and Materials Transactions A, 46(9) pp. 4268–4275.

Acar, Murat O. and Gungor, Salih (2015). Experimental and numerical study of strength mismatch in cross-weld tensile testing. Journal of Strain Analysis for Engineering Design, 50(6) pp. 349–365.

• Download Accepted Manuscript (PDF / 2MB)

Durodola, J. F.; Parikh, T. S.; Fellows, N. A. and Gungor, S. (2014). An etching based axisymmetric solution for the determination of residual stresses in long fibre reinforced metal matrix composites. Journal of Composite Materials, 48(19) pp. 2375–2386.

Toparli, M. B.; Fitzpatrick, M. E. and Gungor, S. (2013). Improvement of the contour method for measurement of near-surface residual stresses from laser peening. Experimental Mechanics, 53(9) pp. 1705–1718.

Acar, M. O.; Bouchard, P. John; Quinta da Fonseca, Joao; Fitzpatrick, Michael E. and Gungor, Salih (2010). Intergranular strains in pre-strained and welded pipes. Materials Science Forum, 652 pp. 13–18.

Sefton, D. E.; Rist, M. A. and Gungor, S. (2009). Rate-dependent deformation of Sn–3.5Ag lead-free solder. Journal of Materials Science: Materials in Electronics, 20(11) pp. 1083–1089.

Kartal, M. E.; Liljedahl, C. D. M.; Gungor, S.; Edwards, L. and Fitzpatrick, M. E. (2008). Determination of the profile of the complete residual stress tensor in a VPPA weld using the multi-axial contour method. Acta Materialia, 56(16) pp. 4417–4428.

Kartal, M.; Molak, R.; Turski, M.; Gungor, S.; Fitzpatrick, M. E. and Edwards, L. (2007). Determination of weld metal mechanical properties utilising novel tensile testing methods. Applied Mechanics and Materials, 7-8 pp. 127–132.

Molak, R. M.; Kartal, M.; Pakiela, Z.; Manaj, W.; Turski, M.; Hiller, S.; Gungor, S.; Edwards, L. and Kurzydłowski, K. J. (2007). Use of micro tensile test samples in determining the remnant life of pressure vessel steels. Applied Mechanics and Materials, 7-8 pp. 187–194.

Kartal, M.; Turski, M.; Johnson, G.; Fitzpatrick, M. E.; Gungor, S.; Withers, P.J. and Edwards, L. (2006). Residual stress measurements in single and multi-pass groove weld specimens using neutron diffraction and the contour method. Materials Science Forum, 524-525 pp. 671–676.

Gungor, Salih (2002). Residual stress measurements in fibre reinforced titanium alloy composites. Acta Materialia, 50(8) pp. 2053–2073.

Sakanashi, Y.; Gungor, S. and Bouchard, J. (2012). Measurement of local creep properties in stainless steel welds. In: 4th International Conference on Integrity of High Temperature Welds, 25-27 Sep 2012, London.

• Download Published Version (PDF / 3MB)

Acar, M. O.; Gungor, S.; Fitzpatrick, M. E. and Bouchard, P. J. (2011). Numerical study of strength mismatch in cross-weld tensile testing. In: International Congress on Advances in Welding Science and Technology for Construction, Energy and Transportation Systems (AWST 2011), 24-25 Oct 2011, Antalya, Turkey.

• Download Accepted Manuscript (PDF / 151kB)

Sakanashi, Y.; Gungor, S. and Bouchard, P. J. (2011). Measurement of Creep Deformation in Stainless Steel Welded Joints. In: Proceedings of the 2011 Annual Conference on Experimental and Applied Mechanics; Volume 5 Optical Measurements, Modeling, and Metrology, 11-16 Jun 2011, Uncasville, CT, USA, pp. 371–378.

Acar, Murat; Gungor, Salih; Bouchard, Peter and Fitzpatrick, M. E. (2010). Effect of prior cold work on the mechanical properties of weldments. In: Proceedings of the 2010 SEM Annual Conference and Exposition on Experimental and Applied Mechanics, 7-10 Jun 2010, Indianapolis, Indiana, USA.

• Download Accepted Manuscript (PDF / 964kB)

Acar, Murat; Gungor, Salih; Ganguly, Supriyo; Bouchard, Peter and Fitzpatrick, M. E. (2009). Variation of mechanical properties in a multi-pass weld measured using digital image correlation. In: Proceedings of the 2009 SEM Annual conference and exposition on Experimental and Applied Mechanics (Zimmerman, Kristin B. ed.), SEM Annual Conference, Society for Experimental Mechanics Inc., Albuquerque, USA, pp. 288–293.

• Download Accepted Manuscript (PDF / 807kB)

Gungor, Salih (1990). Fatigue studies in Al-Mg-Si alloys. PhD thesis The Open University.