Currently browsing: Items authored or edited by Salih Gungor

29 items in this list.
Generated on Tue Oct 15 23:15:52 2024 BST.

ATo Top

Abburi Venkata, K.; Khayatzadeh, S.; Achouri, A.; de Oliveira, J. Araujo; Forsey, A. N.; Gungor, S.; Bouchard, P. J. and Truman, C. E. (2018). Examining Stress Relaxation in a Dissimilar Metal Weld Subjected to Postweld Heat Treatment. Materials Performance and Characterization, 7(4) pp. 675–692.

Acar, M. O.; Gungor, S.; Fitzpatrick, M. E. and Bouchard, P. J. (2011). Numerical study of strength mismatch in cross-weld tensile testing. In: International Congress on Advances in Welding Science and Technology for Construction, Energy and Transportation Systems (AWST 2011), 24-25 Oct 2011, Antalya, Turkey.

Acar, Murat; Gungor, Salih; Bouchard, Peter and Fitzpatrick, M. E. (2010). Effect of prior cold work on the mechanical properties of weldments. In: Proceedings of the 2010 SEM Annual Conference and Exposition on Experimental and Applied Mechanics, 7-10 Jun 2010, Indianapolis, Indiana, USA.

Acar, M. O.; Bouchard, P. John; Quinta da Fonseca, Joao; Fitzpatrick, Michael E. and Gungor, Salih (2010). Intergranular strains in pre-strained and welded pipes. Materials Science Forum, 652 pp. 13–18.

Acar, Murat; Gungor, Salih; Ganguly, Supriyo; Bouchard, Peter and Fitzpatrick, M. E. (2009). Variation of mechanical properties in a multi-pass weld measured using digital image correlation. In: Proceedings of the 2009 SEM Annual conference and exposition on Experimental and Applied Mechanics (Zimmerman, Kristin B. ed.), SEM Annual Conference, Society for Experimental Mechanics Inc., Albuquerque, USA, pp. 288–293.

DTo Top

Durodola, J. F.; Parikh, T. S.; Fellows, N. A. and Gungor, S. (2014). An etching based axisymmetric solution for the determination of residual stresses in long fibre reinforced metal matrix composites. Journal of Composite Materials, 48(19) pp. 2375–2386.

FTo Top

Forsey, Alex; Das, Yadunandan; Simm, Thomas H.; Clark, Dan; Boswell, John; Gungor, Salih and Moat, Richard (2018). Mechanical Property Heterogeneity in Additively Manufactured Nickel Superalloy. Materials Science and Engineering A, 712 pp. 681–684.

GTo Top

Gungor, Salih (1990). Fatigue studies in Al-Mg-Si alloys. PhD thesis The Open University.

JTo Top

Javadi, Y.; Smith, M.C.; Abburi Venkata, K.; Naveed, N.; Forsey, A.N.; Francis, J.A.; Ainsworth, R.A.; Truman, C.E.; Smith, D.J.; Hosseinzadeh, F.; Gungor, S.; Bouchard, P. J.; Dey, H.C.; Bhaduri, A.K. and Mahadevan, S. (2017). Residual stress measurement round robin on an electron beam welded joint between austenitic stainless steel 316L(N) and ferritic steel P91. International Journal of Pressure Vessels and Piping, 154 pp. 41–57.

KTo Top

Kartal, M.; Molak, R.; Turski, M.; Gungor, S.; Fitzpatrick, M. E. and Edwards, L. (2007). Determination of weld metal mechanical properties utilising novel tensile testing methods. Applied Mechanics and Materials, 7-8 pp. 127–132.

MTo Top

Molak, R. M.; Kartal, M.; Pakiela, Z.; Manaj, W.; Turski, M.; Hiller, S.; Gungor, S.; Edwards, L. and Kurzydłowski, K. J. (2007). Use of micro tensile test samples in determining the remnant life of pressure vessel steels. Applied Mechanics and Materials, 7-8 pp. 187–194.

PTo Top

Perumal, Bama; Gungor, Salih; Kockelmann, W.; Fitzpatrick, Michael E. and Bhavani, P. (2021). Texture Evolution during Thermal Processing of Ti-6Al-4V: A Neutron Diffraction Study. SVOA Materials Science and Technology, 3(2) pp. 13–23.

RTo Top

STo Top

Simm, T. H.; Das, Y. B.; Forsey, A. N.; Gungor, S.; Fitzpatrick, M. E.; Prakash, D. G. L.; Moat, R. J.; Birosca, S.; da Fonseca, J. Quinta and Perkins, K. M. (2020). The τ-plot, a multicomponent 1-D pole figure plot, to quantify the heterogeneity of plastic deformation. Materials Characterization, 160, article no. 110114.

Sakanashi, Y.; Gungor, S. and Bouchard, J. (2012). Measurement of local creep properties in stainless steel welds. In: 4th International Conference on Integrity of High Temperature Welds, 25-27 Sep 2012, London.

Sakanashi, Y.; Gungor, S. and Bouchard, P. J. (2011). Measurement of Creep Deformation in Stainless Steel Welded Joints. In: Proceedings of the 2011 Annual Conference on Experimental and Applied Mechanics; Volume 5 Optical Measurements, Modeling, and Metrology, 11-16 Jun 2011, Uncasville, CT, USA, pp. 371–378.

Sefton, D. E.; Rist, M. A. and Gungor, S. (2009). Rate-dependent deformation of Sn–3.5Ag lead-free solder. Journal of Materials Science: Materials in Electronics, 20(11) pp. 1083–1089.

TTo Top

Export

Subscribe to these results

get details to embed this page in another page Embed as feed [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0