Currently browsing: Items authored or edited by Richard Moat https://orcid.org/0000-0002-9445-8658

Akbarian, Shima; Zarei-Hanzaki, Abbas; Abedi, Hamid Reza; Unnikrishnan, Rahul and Moat, Richard (2018). Substructure Development and Deformation Twinning Stimulation through Regulating the Processing Path during Multi-Axial Forging of Twinning Induced Plasticity Steel. Advanced Engineering Materials, 20(11), article no. 1800453.

• Download Accepted Manuscript (PDF / 3MB)

Ahsan, M. Naveed; Pinkerton, Andrew J.; Moat, Richard J. and Shackleton, Judith (2011). A comparative study of laser direct metal deposition characteristics using gas and plasma-atomized Ti–6Al–4V powders. Materials Science and Engineering: A, 528(25-26) pp. 7648–7657.

Attallah, M. M.; Terasaki, H.; Moat, R. J.; Bray, S. E.; Komizo, Y. and Preuss, M. (2011). In-situ observation of primary γ′ melting in Ni-base superalloy using confocal laser scanning microscopy. Materials Characterization, 62(8) pp. 760–767.

Bhamji, I.; Preuss, M.; Moat, R. J.; Threadgill, P. L. and Addison, A. C. (2012). Linear friction welding of aluminium to magnesium. Science and Technology of Welding & Joining, 17(5) pp. 368–374.

Bhamji, I.; Moat, R. J.; Preuss, M.; Threadgill, P. L.; Addison, A. C. and Peel, M. J. (2012). Linear friction welding of aluminium to copper. Science and Technology of Welding & Joining, 17(4) pp. 314–320.

Bhamji, Imran; Preuss, Michael; Threadgill, Philip L.; Moat, Richard J.; Addison, Adrian C. and Peel, Matthew J. (2010). Linear friction welding of AISI 316L stainless steel. Materials Science and Engineering: A, 528(2) pp. 680–690.

Clarke, Daniel John; Moat, Richard and Jowers, Iestyn (2024). Identification of mechanically representative samples for aperiodic honeycombs. Materials Today Communications, 38, article no. 108505.

• Download Published Version (PDF / 6MB)

Clarke, Daniel John; Carter, Francesca; Jowers, Iestyn and Moat, Richard James (2023). An isotropic zero Poisson's ratio metamaterial based on the aperiodic ‘hat’ monotile. Applied Materials Today, 35, article no. 101959.

• Download Published Version (PDF / 5MB)

Clarke, Daniel John; Imediegwu, Chikwesiri; Moat, Richard and Jowers, Iestyn (2023). A systematic numerical and experimental study into the mechanical properties of five honeycombs. Composites Part B: Engineering, 264, article no. 110895.

• Download Published Version (PDF / 2MB)

Das, Yadunandan B.; Forsey, Alexander N.; Kelleher, Joe; Kabra, Saurabh; Fitzpatrick, Michael E.; Simm, Thomas H.; Gungor, Salih and Moat, Richard J. (2018). The influence of temperature on deformation-induced martensitic transformation in 301 stainless steel. Materials Science and Technology, 34(17) pp. 2114–2125.

• Download Accepted Manuscript (PDF / 1MB)

Das, Yadunandan B.; Forsey, Alexander N.; Simm, Thomas H.; Perkins, Karen M.; Fitzpatrick, Michael E.; Gungor, Salih and Moat, Richard J. (2016). In situ observation of strain and phase transformation in plastically deformed 301 austenitic stainless steel. Materials & Design, 112 pp. 107–116.

• Download Accepted Manuscript (PDF / 2MB)

Forsey, Alex; Das, Yadunandan; Simm, Thomas H.; Clark, Dan; Boswell, John; Gungor, Salih and Moat, Richard (2018). Mechanical Property Heterogeneity in Additively Manufactured Nickel Superalloy. Materials Science and Engineering A, 712 pp. 681–684.

• Download Accepted Manuscript (PDF / 4MB)

Francis, J. A.; Moat, R. J.; Abdolvand, H. and Forsey, A. (2014). An assessment of the mechanisms of transformation plasticity in SA508 Grade 3 steel during simulated welding thermal cycles. In: Materials Science Forum, 777 pp. 188–193.

Frankel, P. G.; Wei, J.; Francis, E. M.; Forsey, A.; Ni, N.; Lozano-Perez, S.; Ambard, A.; Blat-Yrieix, M.; Comstock, R. J.; Hallstadius, L.; Moat, R.; Grovenor, C. R. M.; Lyon, S.; Cottis, R. A. and Preuss, M. (2014). Effect of Sn on Corrosion Mechanisms in Advanced Zr-Cladding for Pressurised Water Reactors. In: Zirconium in the Nuclear Industry: 17th Volume, pp. 404–437.

Frankel, P.; Wei, J.; Smith, J.; Lyon, S.; Cottis, R. A.; Preuss, M.; Ni, N.; Lozano-Perez, S.; Moore, K. L.; Yardley, S. S.; Grovenor, C. R. M.; Smith, G.; Sykes, J.; Ambard, A.; Blat-Yrieix, M.; Comstock, R. J.; Hallstadius, L.; Francis, E.; Forsey, A. and Moat, R. (2013). The effect of Sn on corrosion mechanisms in advanced Zr-cladding for pressurised water reactors. In: 17th International Symposium on Zirconium in the Nuclear Industry, 03-07 Feb 2013, Hyderabad.

Gajjar, Pradip K.; Khatri, Bharat C.; Das, Yadunandan and Moat, Richard (2024). Mechanical and intergranular corrosion properties of auto TIG welded TP347H-T91 dissimilar weldme. Materials Science and Technology, 40(7) pp. 503–516.

• Download Accepted Manuscript (PDF / 11MB)

Imediegwu, Chikwesiri; Clarke, Daniel; Carter, Francesca; Grimm, Uwe; Jowers, Iestyn and Moat, Richard (2023). Mechanical characterisation of novel aperiodic lattice structures. Materials & Design, 229, article no. 111922.

• Download Published Version (PDF / 3MB)

Imediegwu, Chikwesiri; Grimm, Uwe; Moat, Richard and Jowers, Iestyn (2023). A computational method for determining the linear elastic properties of 2D aperiodic lattice structures. The Journal of Strain Analysis for Engineering Design, 58(7) pp. 590–602.

• Download Published Version (PDF / 3MB)

Iqbal, N.; Rolph, J.; Moat, R.; Hughes, D.; Hofmann, M.; Kelleher, J.; Baxter, G.; Withers, P. J. and Preuss, M. (2011). A comparison of residual stress development in inertia friction welded fine grain and coarse grain nickel-base superalloy. Metallurgical and Materials Transactions A, 42(13) pp. 4056–4063.

Jowers, Iestyn; Clarke, Daniel John and Moat, Richard J (2024). Square-based honeycombs: a study of shape and performance. In: Gero, John ed. Design Computing and Cognition’24, Volume 1. Springer.

• Download Accepted Manuscript (PDF / 1MB)

Kato, Hiroyuki; Moat, Richard; Mori, Tsutomu; Sasaki, Kazuaki and Withers, Philip (2014). Back stress work hardening confirmed by Bauschinger effect in a TRIP steel using bending tests. ISIJ International, 54(7) pp. 1715–1718.

• Published Version (PDF) This file is not available for public download

Moat, Richard J; Clarke, Daniel John; Carter, Francesca; Rust, Dan and Jowers, Iestyn (2024). A class of aperiodic honeycombs with tuneable mechanical properties. Applied Materials Today, 37, article no. 102127.

• Download Published Version (PDF / 20MB)

Moat, R. J.; Muyupa, E.; Imediegwu, C.; Clarke, D. J.; Jowers, I. and Grimm, U. G. (2022). Compressive behaviour of cellular structures with aperiodic order. Results in Materials, 15, article no. 100293.

• Download Published Version (PDF / 9MB)

Medina-Juárez, Israel; Araujo de Oliveira, Jeferson; Moat, Richard J. and García-Pastor, Francisco (2019). On the Accuracy of Finite Element Models Predicting Residual Stresses in Quenched Stainless Steel. Metals, 9(12), article no. 1308.

• Download Published Version (PDF / 6MB)

Mamun, A. A.; Moat, R. J.; Kelleher, J. and Bouchard, P. J. (2019). The effect of cyclic-loading generated intergranular strains on the creep deformation of a polycrystalline material. Materialia, 7, article no. 100385.

• Download Published Version (PDF / 5MB)

Moat, R. J.; Ooi, S.; Shirzadi, A. A.; Dai, H.; Mark, A. F.; Bhadeshia, H. K. D. H. and Withers, P. J. (2018). Residual stress control of multipass welds using low transformation temperature fillers. Materials Science and Technology, 34(5) pp. 519–528.

• Download Accepted Manuscript (PDF / 3MB)

Mathew, J.; Moat, R.J.; Paddea, S.; Francis, J.A.; Fitzpatrick, M.E. and Bouchard, P.J. (2017). Through-Thickness Residual Stress Profiles in Austenitic Stainless Steel Welds: A Combined Experimental and Prediction Study. Metallurgical and Materials Transactions A, 48(12) pp. 6178–6191.

• Download Accepted Manuscript (PDF / 2MB)
• Download Published Version (PDF / 3MB)
• Download Unspecified Version (PDF / 0B)

Mamun, A. A.; Moat, R. J.; Kelleher, J. and Bouchard, P. J. (2017). Origin of the Bauschinger effect in a polycrystalline material. Materials Science and Engineering: A, 707 pp. 576–584.

• Download Accepted Manuscript (PDF / 1MB)

Mathew, J.; Moat, R. J.; Paddea, S.; Fitzpatrick, M. E. and Bouchard, P. J. (2017). Prediction of residual stresses in girth welded pipes using an artificial neural network approach. International Journal of Pressure Vessels and Piping, 150 pp. 89–95.

• Download Accepted Manuscript (PDF / 3MB)

Mamun, Abdullah; Moat, Richard James and Bouchard, P. John (2015). Origin and Effect of Back Stress on Cyclic Creep Deformation of 316H Stainless Steel. In: Volume 5: High-Pressure Technology; Rudy Scavuzzo Student Paper Competition and 23rd Annual Student Paper Competition; ASME NDE Division, V005T09A013.

Mark, A. F.; Moat, R.; Forsey, A.; Abdolvand, H. and Withers, P. J. (2014). A new method for quantifying anisotropic martensitic transformation strains accumulated during constrained cooling. Materials Science and Engineering: A, 611 pp. 354–361.

• Download Published Version (PDF / 1MB)

Moat, R. J.; Zhang, S. Y.; Kelleher, J.; Mark, A. F.; Mori, T. and Withers, P. J. (2012). Work hardening induced by martensite during transformation-induced plasticity in plain carbon steel. Acta Materialia, 60(20) pp. 6931–6939.

Moat, R. J.; Stone, H. J.; Shirzadi, A. A.; Francis, J. A.; Kundu, S.; Mark, A. F.; Bhadeshia, H. K. D. H.; Karlsson, L. and Withers, P. J. (2011). Design of weld fillers for mitigation of residual stresses in ferritic and austenitic steel welds. Science and Technology of Welding & Joining, 16(3) pp. 279–284.

• Download Accepted Manuscript (PDF / 3MB)

Moat, R. J.; Karadge, M.; Preuss, M.; Bray, S. E. and Rawson, M. (2011). Detailed diffraction and electron microscopy study of inertia-friction-welded dissimilar high-strength steels. Metallurgical and Materials Transactions A, 42(10) pp. 3130–3140.

Moat, R. J.; Pinkerton, A.J.; Li, L.; Withers, P. J. and Preuss, M. (2011). Residual stresses in laser direct metal deposited Waspaloy. Materials Science and Engineering: A, 528(6) pp. 2288–2298.

Moat, R. J.; Pinkerton, A. J.; Li, L.; Withers, P. J. and Preuss, M. (2009). Crystallographic texture and microstructure of pulsed diode laser-deposited Waspaloy. Acta Materialia, 57(4) pp. 1220–1229.

Moat, R. J.; Hughes, D. J.; Steuwer, A.; Iqbal, N.; Preuss, M.; Bray, S. E. and Rawson, M. (2009). Residual stresses in inertia-friction-welded dissimilar high-strength steels. Metallurgical and Materials Transactions A, 40(9) pp. 2098–2108.

Moat, Richard; Karadge, Mallikarjun; Preuss, Michael; Bray, Simon and Rawson, Martin (2008). Phase transformations across high strength dissimilar steel inertia friction weld. Journal of Materials Processing Technology, 204(1-3) pp. 48–58.

Nneji, S. O.; Zhang, S. Y.; Kabra, S.; Moat, R. J. and James, J. A. (2016). Modelling and control of neutron and synchrotron beamline positioning systems. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 813 pp. 123–131.

Obasi, G.C.; Moat, R.J.; Leo Prakash, D.G.; Kockelmann, W.; Quinta da Fonseca, J. and Preuss, M. (2012). In situ neutron diffraction study of texture evolution and variant selection during the α→β→α phase transformation in Ti–6Al–4V. Acta Materialia, 60(20) pp. 7169–7182.

Obasi, G. C.; Moat, R. J.; Prakash, D. G. Leo; Kockelmann, W.; Quinta da Fonseca, J. and Preuss, M. (2011). In Situ observation on the influence of ß grain growth on texture evolution during phase transformation in Ti-6A-4V. Materials Science Forum, 702/3 pp. 854–857.

Prakash, D. G. Leo; Ding, R.; Moat, R. J.; Jones, I.; Withers, P. J.; Fonseca, J. Quinta da and Preuss, M. (2010). Deformation twinning in Ti-6Al-4V during low strain rate deformation to moderate strains at room temperature. Materials Science and Engineering: A, 527(21-22) pp. 5734–5744.

Roy, M. J.; Stoyanov, N. and Moat, R. J. (2024). Open Source Contour Method Analysis for Assessing Residual Stress in Weldments. In: Franck, Christian; Kasza, Karen; Estrada, Jon; De Finis, Rosa; Ólafsson, Geir; Gururaja, Suhasini; Furmanski, Jevan; Forster, Aaron; Kolluru, Pavan; Prime, Mike; Berfield, Tom and Aydiner, Cahit eds. Challenges in Mechanics of Biological Systems and Materials, Thermomechanics and Infrared Imaging, Time Dependent Materials and Residual Stress, Volume 2. SEM 2023. Conference Proceedings of the Society for Experimental Mechanics Series ((CPSEMS)). Cham: Springer, pp. 21–29.

Roy, M.J.; Stoyanov, N.; Moat, R.J. and Withers, P.J. (2020). pyCM: An open-source computational framework for residual stress analysis employing the Contour Method. SoftwareX, 11, article no. 100458.

• Download Published Version (PDF / 2MB)

Ramjaun, T. I.; Stone, H. J.; Karlsson, L.; Gharghouri, M. A.; Dalaei, K.; Moat, R. J. and Bhadeshia, H. K. D. H. (2014). Surface residual stresses in multipass welds produced using low transformation temperature filler alloys. Science and Technology of Welding and Joining, 19(7) pp. 623–630.

Ramjaun, T.; Stone, H. J.; Karlsson, L.; Kelleher, J.; Moat, R. J.; Kornmeier, J. R.; Dalaei, K. and Bhadeshia, H. K. D. H. (2013). Effect of interpass temperature on residual stresses in multipass welds produced using low transformation temperature filler alloy. Science and Technology of Welding & Joining, 19(1) pp. 44–51.

Simm, T. H.; Das, Y. B.; Forsey, A. N.; Gungor, S.; Fitzpatrick, M. E.; Prakash, D. G. L.; Moat, R. J.; Birosca, S.; da Fonseca, J. Quinta and Perkins, K. M. (2020). The τ-plot, a multicomponent 1-D pole figure plot, to quantify the heterogeneity of plastic deformation. Materials Characterization, 160, article no. 110114.

• Download Accepted Manuscript (PDF / 4MB)

Tafazzolimoghaddam, Behrooz; Kumar, Hemant; Krishnamoorthy, M.; Joseph, Prince; Dey, H.C.; Das, C.R. and Moat, Richard (2024). Residual Stress Map for 75Ni13.5Cr2.7B-3.5Si Clad 316 Stainless Steel. Procedia Structural Integrity, 60 pp. 575–581.

• Download Published Version (PDF / 1MB)

Tan, Chaolin; Zou, Ji; Li, Sheng; Jamshidi, Parastoo; Abena, Alessandro; Forsey, Alex; Moat, Richard J.; Essa, Khamis; Wang, Minshi; Zhou, Kesong and Attallah, Moataz M. (2021). Additive manufacturing of bio-inspired multi-scale hierarchically strengthened lattice structures. International Journal of Machine Tools and Manufacture, 167, article no. 103764.

• Download Accepted Manuscript (PDF / 6MB)

Zhao, Zuochao; Moat, Richard and Qin, Rongshan (2019). Mesoscale modelling of miscible and immiscible multicomponent fluids. Scientific reports, 9, article no. 8277 (2019).

• Download Published Version (PDF / 2MB)

Zhang, Shu Yan; Evans, Alexander; Eren, Elvin; Chen, Bo; Pavier, Martyn; Wang, Yiqiang; Pierret, Stephane; Moat, Richard and Mori, Ben (2013). ENGIN-X – instrument for materials science and engineering research. Neutron News, 24(3) pp. 22–26.