Currently browsing: Items authored or edited by P. John Bouchard

Achouri, Anas; Hosseinzadeh, Foroogh; Bouchard, P. John; Paddea, Sanjooram and Muransky, Ondrej (2021). The incremental contour method using asymmetric stiffness cuts. Materials and Design, 197, article no. 109268.

• Download Published Version (PDF / 4MB)

Akrivos, V.; Wimpory, R. C.; Hofmann, M.; Stewart, B.; Muransky, O.; Smith, M. C. and Bouchard, J. (2020). Neutron diffraction measurements of weld residual stresses in three-pass slot weld (Alloy 600/82) and assessment of the measurement uncertainty. Journal of Applied Crystallography, 53(5) pp. 1181–1194.

• Download Published Version (PDF / 2MB)

Abburi Venkata, K.; Khayatzadeh, S.; Achouri, A.; de Oliveira, J. Araujo; Forsey, A. N.; Gungor, S.; Bouchard, P. J. and Truman, C. E. (2018). Examining Stress Relaxation in a Dissimilar Metal Weld Subjected to Postweld Heat Treatment. Materials Performance and Characterization, 7(4) pp. 675–692.

• Download Accepted Manuscript (PDF / 1MB)

Achouri, A.; Bouchard, P. J.; Kabra, S. and Hosseinzadeh, F. (2017). Asymmetric Cuts In The Contour Method For Residual Stress Measurement. In: Proceedings of the 7th International Conference on Mechanics and Materials in Design, INEGI/FEUP, Albufeira, pp. 1177–1178.

• Download Published Version (PDF / 381kB)

Acar, M. O.; Gungor, S.; Fitzpatrick, M. E. and Bouchard, P. J. (2011). Numerical study of strength mismatch in cross-weld tensile testing. In: International Congress on Advances in Welding Science and Technology for Construction, Energy and Transportation Systems (AWST 2011), 24-25 Oct 2011, Antalya, Turkey.

• Download Accepted Manuscript (PDF / 151kB)

Acar, Murat; Gungor, Salih; Bouchard, Peter and Fitzpatrick, M. E. (2010). Effect of prior cold work on the mechanical properties of weldments. In: Proceedings of the 2010 SEM Annual Conference and Exposition on Experimental and Applied Mechanics, 7-10 Jun 2010, Indianapolis, Indiana, USA.

• Download Accepted Manuscript (PDF / 964kB)

Acar, M. O.; Bouchard, P. John; Quinta da Fonseca, Joao; Fitzpatrick, Michael E. and Gungor, Salih (2010). Intergranular strains in pre-strained and welded pipes. Materials Science Forum, 652 pp. 13–18.

Acar, Murat; Gungor, Salih; Ganguly, Supriyo; Bouchard, Peter and Fitzpatrick, M. E. (2009). Variation of mechanical properties in a multi-pass weld measured using digital image correlation. In: Proceedings of the 2009 SEM Annual conference and exposition on Experimental and Applied Mechanics (Zimmerman, Kristin B. ed.), SEM Annual Conference, Society for Experimental Mechanics Inc., Albuquerque, USA, pp. 288–293.

• Download Accepted Manuscript (PDF / 807kB)

Burnett, T. L.; Geurts, R.; Jazaeri, H.; Northover, S. M.; McDonald, S. A.; Haigh, S. J.; Bouchard, P. J. and Withers, P. J. (2015). Multiscale 3D analysis of creep cavities in AISI type 316 stainless steel. Materials Science and Technology, 31(5) pp. 522–534.

Bouchard, P. John (2012). Fourier basis for the engineering assessment of cracks in residual stress fields. Engineering Fracture Mechanics, 91 pp. 37–50.

• Download Accepted Manuscript (PDF / 1MB)

Bouchard, P. John; Ledgard, Peter; Hiller, Stan and Hosseinzadh Torknezhad, Foroogh (2012). Making the cut for the contour method. In: 15th International Conference on Experimental Mechanics, 22-27 Jul 2012, Porto, Portugal.

• Download Published Version (PDF / 9MB)

Bate, Steve and Bouchard, P. John (2011). The validation of weld residual stresses for use in structural integrity assessment. Applied Mechanics and Materials, 70 pp. 297–302.

• Published Version (PDF) This file is not available for public download

Bouchard, P. J. (2009). The NeT bead-on-plate benchmark for weld residual stress simulation. International Journal of Pressure Vessels and Piping, 86(1) pp. 31–42.

Bouchard, P. John; Turski, Mark and Smith, Mike C. (2009). Residual stress concentrations in a stainless steel slot-weld measured by the contour method and neutron diffraction. In: Pressure Vessels and Piping Conference, 26-30 Jul 2009, Prague.

Bouchard, P. J. (2008). Code characterisation of weld residual stress levels and the problem of innate scatter. International Journal of Pressure Vessels and Piping, 85(3) pp. 152–165.

Bouchard, P. J. (2007). Characterising weld residual stress for high temperature assessment. In: 3rd Conference on Integrity of High Temperature Welds, 24-26 May 2007, London, UK, IoM, pp. 57–76.

Bouchard, P. J. (2007). Validated residual stress profiles for fracture assessments of stainless steel pipe girth welds. International Journal of Pressure Vessels and Piping, 84(4) pp. 195–222.

Bouchard, P. J.; Edwards, L.; Youtsos, A. G. and Dennis, R. J. (2006). Development of a residual stress simulation benchmark for a single bead-on-plate benchmark. In: ASME 2006 Pressure Vessels and Piping Conference (PVP2006), 23-27 Jul 2006, Vancouver, BC, Canada, American Society of Mechanical Engineers, New York.

Bouchard, P. J. and Withers, P. J. (2006). Identification of residual stress length scales in welds for fracture assessment. In: Youtsos, A. G. ed. Residual stress and its effects on fatigue and fracture: Proceedings of a Special Symposium held within the 16th European Conference on Fracture - ECF16, Alexandroupolis, Greece, Part 4. Springer Netherlands, pp. 163–176.

Boucher, C; Bouchard, P. J.; Brown, T. B.; Dauda, T. A.; Hein, H.; Lawrjaniec, D.; Smith, D. J.; Truman, C. E.; Ohms, D. C.; Smith, M. C.; Youtsos, A G and Cardamone, D. (2005). Management of nuclear power plant operation by optimising weld repairs - ENPOWER project overview. In: ASME 2005 Pressure Vessels and Piping Conference (PVP2005), 17-21 Jul 2005, Denver, USA, American Society of Mechanical Engineers, New York.

Bouchard, P. J.; George, D.; Santisteban, J. R.; Bruno, G.; Dutta, M.; Edwards, L.; Kingston, E. and Smith, D. J. (2005). Measurement of the residual stresses in a stainless steel pipe girth weld containing long and short repairs. International Journal of Pressure Vessels and Piping, 82(4) pp. 299–310.

Bouchard, P. J. and Soanes, T. P. T. (2005). Residual stress and integrity management issues in power plant. In: IMechE Seminar: Post weld heat treatment and management of residual stress, 2005, London, UK, IMechE.

Bouchard, Peter J.; Santisteban, Javier R.; Edwards, Lyndon; Turski, Mark; James, Jon; Pratihar, Sumit and Withers, Philip J. (2005). Residual stress measurements revealing weld bead start and stop effects in single and multi-pass weld-runs. In: ASME 2005 Pressure Vessels and Piping Conference (PVP2005), 17-21 Jul 2005, Denver, United States, American Society of Mechanical Engineers, New York, pp. 853–860.

Bouchard, P. J. (2005). [Editorial] Special issue of the International Journal of Pressure Vessels and Piping on residual stresses at repair welds.

• Download Accepted Manuscript (PDF / 50kB)

Bouchard, P. J.; Withers, P. J.; McDonald, S. A. and Heenan, R. K. (2004). Quantification of creep cavitation damage around a crack in a stainless steel pressure vessel. Acta Materialia, 52(1) pp. 23–34.

Bouchard, P. J. and Withers, P. J. (2004). The appropriateness of residual stress length scales in structural integrity. Journal of Neutron Research, 12(1) pp. 81–91.

Bouchard, P. J.; Treimer, W. and Fiori, F. (2002). Characterisation of creep cavitation damage in a stainless steel pressure vessel using small angle neutron scattering. Applied Physics A: Materials Science & Processing, 74(1 Supp) s1689-s1691.

Bouchard, P. J.; Goldthorpe, M. R. and Prottey, P. (2001). J-integral and local damage fracture analyses for a pump casing containing large weld repairs. International Journal of Pressure Vessels and Piping, 78(4) pp. 295–305.

Bouchard, P. J. (2001). Residual stresses in lifetime and structural integrity assessment. In: Buschow, K. H. J. ed. Encyclopedia of Materials: Science and Technology. Oxford, UK: Elsevier, pp. 8134–8142.

Das, Yadunandan; Fernandez-Caballero, Antonio; Elmukashfi, Elsiddig; Jazaeri, Hedieh; Forsey, Alex; Hutchings, Michael T.; Schweins, Ralf and Bouchard, P. John (2022). Stress driven creep deformation and cavitation damage in pure copper. Materials Science and Engineering: A, 833, article no. 142543.

Dennis, R. J.; Leggatt, N. A.; Smith, M. C. and Bouchard, P. J. (2010). R6 weld modelling guidelines - application to groove weld worked example. In: ASME PVP/K-PVP 2010, 18-22 Jul 2010, Seattle, WA, US.

Daymond, M. R. and Bouchard, P. J. (2006). Elastoplastic deformation of 316 stainless steel under tensile loading at elevated temperatures. Metallurgical and Materials Transactions A, 37(6) pp. 1863–1873.

Dong, P.; Hong, J. K. and Bouchard, P. J. (2005). Analysis of residual stresses at weld repairs. International Journal of Pressure Vessels and Piping, 82(4) pp. 258–269.

Dong, P.; Zhang, J. and Bouchard, P. J. (2002). Effects of repair weld length on residual stress distribution. Journal of Pressure Vessel Technology, 124(1) pp. 74–80.

Edwards, Lyndon; Smith, Mike C.; Turski, Mark; Fitzpatrick, Mike E and Bouchard, P. John (2008). Advances in residual stress modeling and measurement for the structural integrity assessment of welded thermal power plant. Advanced Materials Research, 41-42 pp. 391–400.

Elcoate, C. D.; Dennis, R. J.; Bouchard, P. J. and Smith, M. C. (2005). Three dimensional multi-pass repair weld simulations. International Journal of Pressure Vessels and Piping, 82(4) pp. 244–257.

• Download Accepted Manuscript (PDF / 2MB)

Elcoate, C. D.; Dennis, R. J.; Bouchard, P. J. and Smith, M. C. (2004). 3-dimensional repair weld simulations - Bead sequencing studies. In: ASME/JSME 2004 Pressure Vessels and Piping Conference (PVP2004), 25-29 Jul 2004, San Diego, USA, American Society of Mechanical Engineers, New York, pp. 9–17.

Githinji, David; Northover, Shirley and Bouchard, P. John (2014). Electron backscatter diffraction (EBSD) measurement of accumulated strain. In: 3rd International ECCC- Creep & Fracture Conference: Creep & Fracture in High Temperature Components, 5-7 May 2014, Rome, Italy.

• Download Published Version (PDF / 521kB)

Githinji, David N.; Northover, Shirley; Bouchard, P. John and Rist, Martin A. (2013). An EBSD study of the deformation of service-aged 316 austenitic steel. Metallurgical and Materials Transactions A, 44(9) pp. 4150–4167.

• Download Accepted Manuscript (PDF / 1MB)

Ganguly, S.; Turski, M.; Fitzpatrick, M. E.; Edwards, L.; Smith, M. C. and Bouchard, P. J. (2008). Full field measurement of plastic flow properties in a multi-pass austenitic stainless steel weld specimen. In: O'Dowd, N. P. ed. Proceedings of the ASME Pressure Vessels and Piping Conference (PVP2008), Volume Vol 6,. ASME, pp. 403–414.

Hosseinzadeh, Foroogh; Tafazzoli-Moghaddam, Behrooz; Kim, Ho Kyeom; Bouchard, Peter John; Akrivos, Vasileios; Vasileiou, Anastasia N. and Smith, Mike (2023). Residual stresses in austenitic thin-walled pipe girth welds: Manufacture and measurements. International Journal of Pressure Vessels and Piping, 206, article no. 150016.

• Download Published Version (PDF / 12MB)

Hosseinzadeh, F.; Traore, Y.; Bouchard, P. J. and Muransky, O. (2016). Mitigating cutting-induced plasticity in the contour method, part 1: Experimental. International Journal of Solids and Structures, 94-95 pp. 247–253.

Holden, Tom M.; Traore, Yeli; James, Jon; Kelleher, Joe and Bouchard, P. John (2015). Determination and mitigation of the uncertainty of neutron diffraction measurements of residual strain in large-grained polycrystalline material. Journal of Applied Crystallography, 48(2) pp. 582–584.

• Download Published Version (PDF / 560kB)

Hosseinzadeh, Foroogh; Kowal, Jan and Bouchard, Peter John (2014). Towards good practice guidelines for the contour method of residual stress measurement. Journal of Engineering (Online only).

• Download Published Version (PDF / 1MB)

Hosseinzadh Torknezhad, F.; Ledgard, P. and Bouchard, P. J. (2013). Controlling the cut in contour residual stress measurements of electron beam welded Ti-6Al-4V alloy plates. Experimental Mechanics, 53(5) pp. 829–839.

Hosseinzadeh, F. and Bouchard, P. J. (2013). Mapping multiple components of the residual stress tensor in a large P91 steel pipe girth weld using a single contour cut. Experimental Mechanics, 53(2) pp. 171–181.

Hosseinzadeh, Foroogh and Bouchard, Peter John (2013). Mapping multiple components of the stress tensor using the contour method. Materials Science Forum, 768-769 pp. 87–94.

Hosseinzadeh, Foroogh and Bouchard, P. John (2013). Residual stress measurement of a hipped bonded valve seat using the contour method. In: ASME 2013 Pressure Vessels and Piping Conference, 14-18 Jul 2013, Paris.

Hosseinzadh, Foroogh; Toparli, Muhammed Burak and Bouchard, Peter John (2012). Slitting and Contour Method Residual Stress Measurements in an Edge Welded Beam. Journal of Pressure Vessel Technology, 134(1) 011402-1-011402-6.

Hosseinzadeh, Foroogh and Bouchard, P. John (2012). Residual stress measurement of a ferritic bead on plate benchmark test specimen using the contour method. In: ASME 2012 Pressure Vessels and Piping Conference, 15-19 Jul 2012, Toronto.

Hosseinzadeh, Foroogh and Bouchard, Peter (2011). Application of the contour method to validate residual stress predictions. In: Second International Conference on Advances in Nuclear Materials (ANM-2011), 09-11 Feb 2011, Mumbai, India.

• Download Published Version (PDF / 998kB)

Hosseinzadh, Foroogh; Bouchard, P. John and James, Jonathan A. (2010). Measurements of Residual Stress in a Welded Compact Tension Specimen Using the Neutron Diffraction and Slitting Techniques. Materials Science Forum, 652 pp. 210–215.

Hosseinzadeh, Foroogh; Toparli, Muhammed and Bouchard, Peter (2010). Residual stress measurements in an edge welded beam specimen. In: ASME 2010 Pressure Vessels and Piping Conference, 18-22 Jul 2010, Bellevue, Seattle Washington.

Hurrell, P.; Watson, C.; Bouchard, J.; Smith, M.; Dennis, R.; Leggatt, N.; Bate, S. and Warren, A. (2009). Development of weld modelling guidelines in the UK. In: Pressure Vessels and Piping Conference, 26-30 Jul 2009, Prague.

Hossain, S.; Truman, C. E.; Smith, D. J. and Bouchard, P. J. (2007). Measurement of residual stresses in a nozzle-to-cylinder weld after thermal ageing at 550°C. In: ASME 2007 Pressure Vessels and Piping/CREEP8 Conference, 22-26 Jul 2007, San Antonio, Texas, American Society of Mechanical Engineers, New York.

Hossain, S.; Truman, C. E.; Smith, D. J. and Bouchard, P. J. (2006). Measurement of residual stresses in a type 316H stainless steel offset repair in a pipe girth weld. Journal of Pressure Vessel Technology, 128(3) pp. 420–426.

Hossain, S.; Truman, C. E.; Smith, D. J. and Bouchard, P. J. (2004). Measurement of residual stresses in a type 316H stainless steel offset repair in a pipe girth weld. In: ASME/JSME 2004 Pressure Vessels and Piping Conference (PVP2004), 25-29 Jul 2004, San Diego, United States, American Society of Mechanical Engineers, New York, pp. 3–8.

Jazaeri, Hedieh; Bouchard, P. John; Hutchings, Michael T.; Spindler, Mike W.; Mamun, Abdullah A. and Heenan, Richard K. (2019). An Investigation into Creep Cavity Development in 316H Stainless Steel. Metals, 9(3), article no. 318.

• Download Published Version (PDF / 4MB)

Javadi, Y.; Smith, M.C.; Abburi Venkata, K.; Naveed, N.; Forsey, A.N.; Francis, J.A.; Ainsworth, R.A.; Truman, C.E.; Smith, D.J.; Hosseinzadeh, F.; Gungor, S.; Bouchard, P. J.; Dey, H.C.; Bhaduri, A.K. and Mahadevan, S. (2017). Residual stress measurement round robin on an electron beam welded joint between austenitic stainless steel 316L(N) and ferritic steel P91. International Journal of Pressure Vessels and Piping, 154 pp. 41–57.

• Download Published Version (PDF / 6MB)

Jazaeri, H.; Bouchard, P. J.; Hutchings, Michael; Mamun, A. A. and Heenan, R. K. (2016). Study of cavities in a creep crack growth test specimen. Procedia Structural Integrity, 2 pp. 942–949.

• Download Published Version (PDF / 1MB)

Jazaeri, H.; Bouchard, P. J.; Hutchings, M.; Mamun, A. and Heenan, R. (2015). Study of creep cavitation through creep life. In: 13th International Conference on Creep and Fracture of Engineering Materials and Structures, 31 May - 4 Jun 2015, Toulouse, France.

Jazaeri, H.; Bouchard, P. J.; Hutchings, M. T.; Mamun, A. A. and Heenan, R. K. (2015). Application of small angle neutron scattering to study creep cavitation in stainless steel weldments. Materials Science and Technology, 31(5) pp. 535–539.

Jazaeri, H.; Bouchard, P. J.; Hutchings, Michael and Lindner, P. (2014). Study of creep cavitation in stainless steel weldment. Materials Science and Technology, 30(1) pp. 38–42.

• Published Version (PDF) This file is not available for public download

Jazaeri, H.; Bouchard, P. J.; Hutchings, M. T. and Lindner, P. (2014). Study of creep cavitation in a stainless steel weldment using small angle neutron scattering and scanning electron microscopy. In: Proceedings of the ASME 2014 Pressure Vessels & Piping Conference, Materials and Fabrication, article no. PVP2014-28641.

Jazaeri, H.; Bouchard, P. J.; Hutchings, Michael and Lindner, P. (2012). Study of creep cavitation in a stainless steel weldment. In: 4th International Conference on Integrity of High Temperature Welds, 25-27 Sep 2012, London.

• Download Accepted Manuscript (PDF / 1MB)

Kim, H.K.; Carlson, S. S.; Stanfield, M. L.; Paddea, Sanjooram; Hosseinzadeh, F. and Bouchard, P. J. (2022). Mitigating Cutting-Induced Plasticity Errors in the Determination of Residual Stress at Cold Expanded Holes Using the Contour Method. Experimental Mechanics, 62 pp. 3–18.

• Download Published Version (PDF / 3MB)

K R, Praveen; Bouchard, P. John; Hosseinzadeh, Foroogh; Lefebvre, Fabien and Guillon, Damien (2022). Advancing the Contour Method for the Measurement of Residual Stress in Unbalanced Asymmetric CFRP Laminate. In: 11th International Conference on Residual Stresses: ICRS11, Mar 2022, France.

• Download Accepted Manuscript (PDF / 191kB)

Kartal, M.E.; Kang, Y-H.; Korsunsky, A.M.; Cocks, A.C.F. and Bouchard, J. P. (2016). The influence of welding procedure and plate geometry on residual stresses in thick components. International Journal of Solids and Structures, 80 pp. 420–429.

Kundu, A.; Bouchard, P. J.; Kumar, S.; Venkata, K. A.; Francis, J. A.; Paradowska, A.; Dey, G. K. and Truman, C. E. (2013). Residual stresses in P91 steel electron beam welds. Science and Technology of Welding & Joining, 18(1) pp. 70–75.

Kankanala, Anusha; James, Jon; Bouchard, John; Northover, Shirley and Yescas, Miguel (2011). Measurement of residual stresses in a dissimilar metal welded pipe. In: MECA SENS VI, 7-9 Sep 2011, Hamburg, Germany.

• Download Published Version (PDF / 1MB)

Leggatt, N. A.; Dennis, R. J.; Bouchard, P. J. and Smith, M. C. (2008). Numerical methods to predict distortion in welded components. In: ASME 2008 Pressure Vessels and Piping Conference (PVP2008), 27-31 Jul 2008, Chicago, American Society of Mechanical Engineers, New York.

Leggatt, N.; Dennis, R. J.; Smith, M. C. and Bouchard, P. J. (2008). Numerical methods for welding simulation - the next technical step. In: ASME 2008 Pressure Vessels and Piping Conference (PVP2008), 27-31 Jul 2008, Chicago, American Society of Mechanical Engineers, New York.

Lee, K. S.; Moreton, D. N.; Bouchard, P. J. and Moffat, D. G. (2006). The post-yield behaviour of an internally pressurised cylinder having a pad attachment. Strain, 42(4) pp. 305–314.

Mamun, A. A.; Moat, R. J.; Kelleher, J. and Bouchard, P. J. (2019). The effect of cyclic-loading generated intergranular strains on the creep deformation of a polycrystalline material. Materialia, 7, article no. 100385.

• Download Published Version (PDF / 5MB)

Mirzaee-Sisan, Ali; Bouchard, P. John and Hosseinzadeh, Foroogh (2019). Standardisation on Measurement and Interpretation of Residual Stress Data. In: ASME 2019 38th International Conference on Ocean, Offshore and Arctic Engineering, American Society of Mechanical Engineers, 4.

Mamun, A. A.; Moat, R. J.; Kelleher, J. and Bouchard, P. J. (2017). Origin of the Bauschinger effect in a polycrystalline material. Materials Science and Engineering: A, 707 pp. 576–584.

• Download Accepted Manuscript (PDF / 1MB)

Mathew, J.; Moat, R. J.; Paddea, S.; Fitzpatrick, M. E. and Bouchard, P. J. (2017). Prediction of residual stresses in girth welded pipes using an artificial neural network approach. International Journal of Pressure Vessels and Piping, 150 pp. 89–95.

• Download Accepted Manuscript (PDF / 3MB)

Mamun, Abdullah; Moat, Richard James and Bouchard, P. John (2015). Origin and Effect of Back Stress on Cyclic Creep Deformation of 316H Stainless Steel. In: Volume 5: High-Pressure Technology; Rudy Scavuzzo Student Paper Competition and 23rd Annual Student Paper Competition; ASME NDE Division, V005T09A013.

Nadri, B.; Bouchard, P. J.; Smith, M.; Truman, C. E. and Smith, D. J. (2011). Modelling and statistical treatment of residual stress distributions in an edge welded stainless steel beam. Strain, 47(6) pp. 505–517.

Nadri, Brahim; Smith, Mike C.; Truman, Christopher E.; Smith, David J. and Bouchard, P. John (2009). Statistical analysis of pipe girth weld experimental residual stress data. In: Pressure Vessels and Piping Conference, 26-30 Jul 2009, Prague.

Nadri, B.; Bouchard, P. J.; Truman, C. E. and Smith, D. J. (2008). A statistical framework for analysing weld residual stresses for structural integrity assessment. In: ASME 2008 Pressure Vessels and Piping Conference (PVP2008), 27-31 Jul 2008, Chicago, American Society of Mechanical Engineers, New York.

Nadri, B.; Bouchard, P. J.; Truman, C. E. and Smith, D. J. (2007). Statistical analysis of experimental and numerical weld residual stresses. In: ASME 2007 Pressure Vessels and Piping/CREEP8 Conference, 22-26 Jul 2007, San Antonio, Texas, American Society of Mechanical Engineers, New York.

Ohms, C.; Martins, R. V.; Uca, O.; Youtsos, A. G.; Bouchard, P. J.; Smith, M. C.; Keavey, M.; Bate, S. K.; Gilles, P.; Wimpory, R. C. and Edwards, L. (2008). The European network on neutron techniques standardization for structural integrity - NET. In: ASME 2008 Pressure Vessels and Piping Conference (PVP2008), 27-31 Jul 2008, Chicago, American Society of Mechanical Engineers, New York.

Paradowska, Anna M.; Tremsin, Anton; Kelleher, Joe F.; Zhang, Shu Yen; Paddea, Sanjooram; Burca, Genoveva; James, Jon A.; Ahmed, Rehan; Faisal, Nadimul H.; Grazzi, Francesco; Festa, Giulia; Andreani, Carla; Civita, Francesco; Bouchard, Peter J.; Kockelman, Winfried and Fitzpatrick, Michael E. (2012). Modern and historical engineering concerns investigated by neutron diffraction on ENGIN-X. Journal of Solid Mechanics and Materials Engineering, 6(6) pp. 408–418.

Paddea, S.; Francis, J. A.; Paradowska, A M; Bouchard, P. J. and Shibli, I. A. (2012). Residual Stress Distributions in a P91 Steel-Pipe Girth Weld before and after Post Weld Heat Treatment. Materials Science and Engineering A, 534 pp. 663–672.

• Published Version (PDF) This file is not available for public download

Paradowska, A. M.; Baczmańsk, A.; Zhang, S. Y.; Rao, A.; Bouchard, P. J. and Kelleher, J. (2011). In-situ Neutron Diffraction Studies of Various Metals on Engin-X at ISIS. In: CAMP-ISIJ, 24 pp. 539–542.

• Download Published Version (PDF / 2MB)

Paddea, S.; Francis, J. A.; Paradowska, A.; Bouchard, P. and Shiblis, I. A. (2010). Characterisation of residual stresses in a welded P91 steel pipe section using neutron diffraction. In: 8th European Conference on Residual Stresses, 26-28 Jun 2010, Riva del Garda, Italy.

Pratihar, S.; Turski, M.; Edwards, L. and Bouchard, P. J. (2009). Neutron diffraction residual stress measurements in a 316L stainless steel bead-on-plate weld specimen. International Journal of Pressure Vessels and Piping, 86(1) pp. 13–19.

Rao, Ashwin; Bouchard, P. John; Northover, Shirley M. and Fitzpatrick, Michael E. (2012). Anelasticity in austenitic stainless steel. Acta Materialia, 60(19) pp. 6851–6861.

Rao, Ashwin; Chong, Kok; Bouchard, Peter and Fitzpatrick, M. E. (2011). Internal stress generation in austentic stainless steels during creep deformation. In: 2011 ASME Pressure Vessels and Piping Conference, 17-21 Jul 2011, Baltimore, MD, USA.

Rao, Ashwin; Bouchard, Peter and Fitzpatrick, M. E. (2010). Anelasticity in austenitic steels. Ceramic Transactions, 222 pp. 133–143.

Smith, M.C.; Muransky, O.; Xiong, Q.; Bouchard, P. J.; Mathew, J. and Austin, C. (2019). Validated prediction of weld residual stresses in austenitic steel pipe girth welds before and after thermal ageing, part 1: Mock-up manufacture, residual stress measurements, and materials characterisation. International Journal of Pressure Vessels and Piping, 172 pp. 233–250.

• Download Accepted Manuscript (PDF / 13MB)

Sakanashi, Y.; Gungor, S.; Forsey, A. N. and Bouchard, P. J. (2017). Measurement of Creep Deformation across Welds in 316H Stainless Steel Using Digital Image Correlation. Experimental Mechanics, 57(2) pp. 231–244.

• Download Published Version (PDF / 3MB)

Sakanashi, Y.; Gungor, S. and Bouchard, J. (2012). Measurement of local creep properties in stainless steel welds. In: 4th International Conference on Integrity of High Temperature Welds, 25-27 Sep 2012, London.

• Download Published Version (PDF / 3MB)

Smith, M. C.; Bouchard, P. J.; Turski, M.; Edwards, L. and Dennis, R. J. (2012). Accurate prediction of residual stress in stainless steel welds. Computational Materials Science, 54 pp. 312–328.

Sakanashi, Y.; Gungor, S. and Bouchard, P. J. (2011). Measurement of Creep Deformation in Stainless Steel Welded Joints. In: Proceedings of the 2011 Annual Conference on Experimental and Applied Mechanics; Volume 5 Optical Measurements, Modeling, and Metrology, 11-16 Jun 2011, Uncasville, CT, USA, pp. 371–378.

Smith, Michael .C; Smith, Ann C.; Wimpory, Robert C.; Ohms, Carsten; Nadri, Brahim and Bouchard, P. John (2009). Optimising residual stress measurements and predictions in a welded benchmark specimen: a review of Phase 2 of the NeT Task Group 1 Single Bead on Plate Round Robin. In: Pressure Vessels and Piping Conference, 26-30 Jul 2009, Prague.

Smith, Michael C.; Bouchard, Peter J.; Goldthorpe, Martin R. and Lawrjaniec, Didier (2005). Fracture margins for growing cracks in weld repairs. In: ASME 2005 Pressure Vessels and Piping Conference (PVP2005), 17-21 Jul 2005, Denver, United States, American Society of Mechanical Engineers, New York, pp. 371–383.

Smith, D. J.; Bouchard, P. J. and George, D. (2000). Measurement and prediction of residual stresses in thick-section steel welds. Journal of Strain Analysis for Engineering Design, 35(4) pp. 287–305.

• Published Version (PDF) This file is not available for public download

Traore, Yeli; Hosseinzadeh, Foroogh and Bouchard, P. John (2014). Plasticity in the contour method of residual stress measurement. Advanced Materials Research, 996 pp. 337–342.

Traore, Y.; Paddea, S.; Bouchard, P. J. and Gharghouri, M. A. (2013). Measurement of the residual stress tensor in a compact tension weld specimen. Experimental Mechanics, 53(4) pp. 605–618.

• Download Accepted Manuscript (PDF / 979kB)

Traore, Yeli; Bouchard, Peter; Francis, John and Hosseinzadeh, Foroogh (2011). A novel cutting strategy for reducing plasticity induced errors in residual stress measurements made with the contour method. In: ASME Pressure Vessels and Piping Conference 2011, 17-21 Jul 2011, Baltimore, USA.

Turski, M.; Smith, M. C.; Bouchard, P. J.; Edwards, L. and Withers, P. J. (2009). Spatially resolved materials property data from a uniaxial cross-weld tensile test. Journal of Pressure Vessel Technology, 131(6) pp. 1–7.

Turskia, M.; Bouchard, P. J.; Steuwera, A. and Withers, P. J. (2008). Residual stress driven creep cracking in AISI Type 316 stainless steel. Acta Materialia, 56(14) pp. 3598–3612.

Turski, M.; Bouchard, P. J.; Smith, M. C. and Edwards, L. (2007). Spatially resolved materials property data from a cross-weld tensile test. In: ASME 2007 Pressure Vessels and Piping/CREEP8 Conference, 22-26 Jul 2007, San Antonio, Texas, American Society of Mechanical Engineers, New York.

Turski, M.; Edwards, L.; James, J.; Bouchard, P. J.; Smith, M. C. and Withers, P. J. (2006). Residual stress measurement within a single pass groove weld specimen utilising neutron diffraction and the contour method. In: ASME 2006 Pressure Vessels and Piping Conference (PVP2006), 23-27 Jul 2006, Vancouver, BC, Canada, American Society of Mechanical Engineers, New York.

• Published Version (PDF) This file is not available for public download

Turski, M.; Sherry, A. H.; Bouchard, P. J. and Withers, P. J. (2004). Residual stress driven creep cracking in type 316 stainless steel. Journal of Neutron Research, 12(1-3) pp. 45–49.

Unnikrishnan, Rahul; Northover, Shirley; Jazaeri, Hedieh and Bouchard, P. John (2016). Investigating plastic deformation around a reheat-crack in a 316H austenitic stainless steel weldment by misorientation mapping. In: Procedia Structural Integrity, Elsevier, 2 pp. 3501–3507.

• Download Published Version (PDF / 1MB)

Withers, P. J.; Turski, M.; Edwards, L.; Bouchard, P. J. and Buttle, D. J. (2008). Recent advances in residual stress measurement. International Journal of Pressure Vessels and Piping, 85(3) pp. 118–127.

Xue, Jilin; Bouchard, John; Chen, Xuedong; Fan, Zhichao and Zhou, Yu (2019). Anisotropic elastic constants calculation of stainless steel cladded layers of pressure vessel steel plate. International Journal of Pressure Vessels and Piping, 177, article no. 103991.

• Download Accepted Manuscript (PDF / 1MB)

Zhou, Yu; Fan, Zhichao; Chen, Xuedong; Jiang, Huifeng; Jazaeri, Hedieh and Bouchard, Peter John (2020). Correlation Between Thermal Desorption Spectrum Features and Creep Damage. In: Materials and Fabrication, ASME 2020 Pressure Vessels & Piping Conference, ASME, article no. PVP2020-21224, V006T06A034.