Currently browsing: Items authored or edited by Michael E. Fitzpatrick

Acar, Murat O. and Fitzpatrick, Michael E. (2017). Determination of plasticity following deformation and welding of austenitic stainless steel. Materials Science and Engineering: A, 701 pp. 203–213.

• Download Accepted Manuscript (PDF / 1MB)

Ahmad, Bilal and Fitzpatrick, Michael E. (2016). Analysis of Residual Stresses in Laser-Shock-Peened and Shot-Peened Marine Steel Welds. Metallurgical and Materials Transactions A, 48(2) pp. 759–770.

Araujo de Oliveira, J.; Kowal, J.; Gungor, S. and Fitzpatrick, M. E. (2015). Determination of normal and shear residual stresses from fracture surface mismatch. Materials & Design, 83(C) pp. 176–184.

• Download Accepted Manuscript (PDF / 3MB)

Araujo de Oliveira, Jeferson; Fitzpatrick, Michael E. and Kowal, Jan (2014). Residual stress measurements on a metal matrix composite using the contour method with brittle fracture. In: Advanced Materials Research, Trans Tech Publications, 996 pp. 349–354.

• Download Accepted Manuscript (PDF / 467kB)

Ahmed, R.; Fitzpatrick, M. E. and Faisal, N. H. (2012). A comparison of neutron diffraction and hole-drilling residual strain measurements in thermally sprayed coatings. Surface and Coatings Technology, 206(19-20) pp. 4180–4185.

Ahmed, R.; Faisal, N. H.; Paradowska, A. M. and Fitzpatrick, M. E. (2012). Residual strain and fracture response of Al₂O₃ coatings deposited via APS and HVOF techniques. Journal of Thermal Spray Technology, 21(1) pp. 23–40.

Ahmed, R.; Faisal, N. H.; Paradowska, A. M.; Fitzpatrick, M. E. and Khor, K. A. (2011). Neutron diffraction residual strain measurements in nanostructured hydroxyapatite coatings for orthopaedic implants. Journal of the Mechanical Behavior of Biomedical Materials, 4(8) pp. 2043–2054.

Acar, M. O.; Gungor, S.; Fitzpatrick, M. E. and Bouchard, P. J. (2011). Numerical study of strength mismatch in cross-weld tensile testing. In: International Congress on Advances in Welding Science and Technology for Construction, Energy and Transportation Systems (AWST 2011), 24-25 Oct 2011, Antalya, Turkey.

• Download Accepted Manuscript (PDF / 151kB)

Acar, Murat; Gungor, Salih; Bouchard, Peter and Fitzpatrick, M. E. (2010). Effect of prior cold work on the mechanical properties of weldments. In: Proceedings of the 2010 SEM Annual Conference and Exposition on Experimental and Applied Mechanics, 7-10 Jun 2010, Indianapolis, Indiana, USA.

• Download Accepted Manuscript (PDF / 964kB)

Acar, M. O.; Bouchard, P. John; Quinta da Fonseca, Joao; Fitzpatrick, Michael E. and Gungor, Salih (2010). Intergranular strains in pre-strained and welded pipes. Materials Science Forum, 652 pp. 13–18.

Acar, Murat; Gungor, Salih; Ganguly, Supriyo; Bouchard, Peter and Fitzpatrick, M. E. (2009). Variation of mechanical properties in a multi-pass weld measured using digital image correlation. In: Proceedings of the 2009 SEM Annual conference and exposition on Experimental and Applied Mechanics (Zimmerman, Kristin B. ed.), SEM Annual Conference, Society for Experimental Mechanics Inc., Albuquerque, USA, pp. 288–293.

• Download Accepted Manuscript (PDF / 807kB)

Ahmad, H. Y.; Fitzpatrick, M. E. and Edwards, L. (1997). Discussion on the method of caustics in conjunction with the method of birefringent coatings for the solution of fracture mechanics problems. International Journal of Fracture, 87(4) L97-L99.

Ahmad, H. Y.; Fitzpatrick, M. E.; Wallhead, I. R. and Edwards, L. (1996). Measurements of stress intensity factors of an interface crack under mixed mode loading. Journal of Adhesion, 56(1-4) pp. 187–204.

Burca, G.; Kockelmann, W.; James, J. A. and Fitzpatrick, M. E. (2013). Modelling of an imaging beamline at the ISIS pulsed neutron source. Journal of Instrumentation, 8(10), article no. P10001.

• Download Accepted Manuscript (PDF / 2MB)

Bacon, D.H.; Edwards, L.; Moffatt, J. E. and Fitzpatrick, M. E. (2013). Fatigue and fracture of a 316 stainless steel metal matrix composite reinforced with 25% titanium diboride. International Journal of Fatigue, 48 pp. 39–47.

• Download Accepted Manuscript (PDF / 1MB)

Burca, G.; James, J. A.; Kockelmann, W.; Fitzpatrick, M. E.; Zhang, S.Y.; Hovind, J. and van Langh, R. (2011). A new bridge technique for neutron tomography and diffraction measurements. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 651(1) pp. 229–235.

Bacon, D. H.; Edwards, L.; Moffatt, J. E. and Fitzpatrick, M. E. (2011). Synchrotron X-ray diffraction measurements of internal stresses during loading of steel-based metal matrix composites reinforced with TiB₂ particles. Acta Materialia, 59(9) pp. 3373–3383.

Barry, N.; Hainsworth, S. V. and Fitzpatrick, M. E. (2009). Effect of shot peening on the fatigue behaviour of cast magnesium A8. Materials Science and Engineering A, 507(1-2) pp. 50–57.

• Download Accepted Manuscript (PDF / 1MB)

Baczmanski, A.; Levy-Tubiana, R.; Fitzpatrick, M.E. and Lodini, A. (2004). Elastoplastic deformation of Al/SiC_p metal–matrix composite studied by self-consistent modelling and neutron diffraction. Acta Materialia, 52 pp. 1565–1577.

Balart, M.J.; Bouzina, A.; Edwards, L. and Fitzpatrick, M.E. (2004). The onset of tensile residual stresses in grinding of hardened steels. Materials Science and Engineering: A, 367(1-2) pp. 132–142.

Ben Rhouma, A.; Braham, C.; Fitzpatrick, M. E.; Lédion, J. and Sidhom, H. (2001). Effects of surface preparation on pitting resistance, residual stress, and stress corrosion cracking in austenitic stainless steels. Journal of Materials Engineering and Performance, 10(5) pp. 507–514.

Chong, Kok Boon and Fitzpatrick, Michael E. (2017). Evolution of stress fields and phase content in corroded zirconium cladding materials. Surface and Coatings Technology, 324 pp. 140–145.

• Download Accepted Manuscript (PDF / 1MB)

Das, Yadunandan B.; Forsey, Alexander N.; Kelleher, Joe; Kabra, Saurabh; Fitzpatrick, Michael E.; Simm, Thomas H.; Gungor, Salih and Moat, Richard J. (2018). The influence of temperature on deformation-induced martensitic transformation in 301 stainless steel. Materials Science and Technology, 34(17) pp. 2114–2125.

• Download Accepted Manuscript (PDF / 1MB)

Das, Yadunandan B.; Forsey, Alexander N.; Simm, Thomas H.; Perkins, Karen M.; Fitzpatrick, Michael E.; Gungor, Salih and Moat, Richard J. (2016). In situ observation of strain and phase transformation in plastically deformed 301 austenitic stainless steel. Materials & Design, 112 pp. 107–116.

• Download Accepted Manuscript (PDF / 2MB)

Dorman, M.; Toparli, M. B.; Smyth, N.; Cini, A.; Fitzpatrick, M. E. and Irving, P. E. (2012). Effect of laser shock peening on residual stress and fatigue life of clad 2024 aluminium sheet containing scribe defects. Materials Science and Engineering: A, 548 pp. 142–151.

• Download Accepted Manuscript (PDF / 2MB)

Daymond, M.R. and Fitzpatrick, M.E. (2006). Effect of cyclic plasticity on internal stresses in a metal matrix composite. Metallurgical and Materials Transactions A, 37(6) pp. 1977–1986.

Dutta, M.; Bruno, G.; Edwards, L. and Fitzpatrick, M.E. (2004). Neutron diffraction measurement of the internal stresses following heat treatment of a plastically deformed Al/SiC particulate metal-matrix composite. Acta Materialia, 52(13) pp. 3881–3888.

Edwards, Lyndon; Smith, Mike C.; Turski, Mark; Fitzpatrick, Mike E and Bouchard, P. John (2008). Advances in residual stress modeling and measurement for the structural integrity assessment of welded thermal power plant. Advanced Materials Research, 41-42 pp. 391–400.

Edwards, L; Fitzpatrick, M. E.; Irving, P. E.; Sinclair, I; Zhang, X and Yapp, D (2005). An integrated approach to the determination and consequences of residual stress on the fatigue performance of welded aircraft structures. Journal of ASTM International

Edwards, L.; Bouchard, P.J.; Dutta, M.; Wang, D.Q.; Santisteban, J.R.; Hiller, S. and Fitzpatrick, M.E. (2005). Direct measurement of the residual stresses near a 'boat-shaped' repair in a 20 mm thick stainless steel tube butt weld. International Journal of Pressure Vessels and Piping, 82(4) pp. 288–298.

Fitzpatrick, M.E. (2006). Internal stress development during fatigue cycling of high-strength Al/SiC metal matrix composites. Materials Science Forum, 524-525 pp. 769–774.

Fitzpatrick, M. E.; Fry, A. T.; Holdway, P.; Kandil, F. A.; Shackleton, J. and Suominen, L (2005). Determination of residual stresses by X-ray diffraction.

Fitzpatrick, M. E.; Moffatt, J. E.; Dubois, A.; Gregoire, F. and Tarrant, A. D (2002). Influence of heat treatment processes on fatigue performance of particle reinforced aluminium alloys. Materials Science and Technology, 18(12) pp. 1453–1457.

Fitzpatrick, M. E.; Withers, P. J.; Baczmanski, A.; Hutchings, Michael; Levy, R.; Ceretti, M. and Lodini, A. (2002). Changes in the misfit stresses in an Al/SiC_p metal matrix composite under plastic strain. Acta Materialia, 50(5) pp. 1031–1040.

Fitzpatrick, M. E.; Hutchings, Michael and Withers, P. J. (1999). Separation of measured fatigue crack stress fields in a metal matrix composite material. Acta Materialia, 47(2) pp. 585–593.

Fitzpatrick, M. E. and Edwards, L. (1998). Fatigue Crack/Residual Stress Field Interactions and Their Implications for Damage-Tolerant Design. Journal of Materials Engineering and Performance, 7(2) pp. 190–198.

Fitzpatrick, M. E.; Dutta, M. and Edwards, L. (1998). Determination by neutron diffraction of effect of plasticity on crack tip strains in a metal matrix composite. Materials Science and Technology, 14(9-10) pp. 980–986.

Fitzpatrick, M. E.; Hutchings, Michael and Withers, P. J. (1997). Separation of macroscopic, elastic mismatch and thermal expansion misfit stresses in metal matrix composite quenched plates from neutron diffraction measurements. Acta Materialia, 45(12) pp. 4867–4876.

Fitzpatrick, M. E.; Bhattacharjee, D.; Cree, A. M. and Daykin, C. R. S. (1996). Is fatigue surface roughness a sufficient condition for the generation of crack closure? Scripta Materialia, 35(11) pp. 1335–1340.

Fitzpatrick, M. E.; Hutchings, Michael; King, J. E.; Knowles, D. M. and Withers, P. J. (1995). Effect of thermal residual stresses on fatigue crack opening and propagation behavior in an Al/SiC p metal matrix composite. Metallurgical and Materials Transactions A, 26(12) pp. 3191–3198.

Ganguly, S.; James, J. A.; Fitzpatrick, M. E. and Tanguy, A. (2010). Automation of a neutron diffractometer for analysis of residual stress inside complex engineering components. Applied Physics A: Materials Science & Processing, 99(3) pp. 601–606.

Ganguly, S.; Edwards, L. and Fitzpatrick, M. E. (2010). Problems in using a comb sample as a stress-free reference for the determination of welding residual stress by diffraction. Materials Science and Engineering A, 528(3) pp. 1226–1232.

• Download Accepted Manuscript (PDF / 852kB)

Ganguly, S.; Stelmukh, V.; Fitzpatrick, M. E. and Edwards, L. (2008). Analysis of residual stress in metal-inert-gas-welded Al-2024 using neutron and synchrotron X-ray diffraction. Materials Science and Engineering A, 491(1-2) pp. 248–257.

Ganguly, S.; Pratihar, S.; Fitzpatrick, M.E. and Edwards, L. (2008). Study of residual stress distribution in a stainless steel bead-on-plate simulation benchmark sample. Materials Science Forum, 571-572 pp. 367–373.

Ganguly, S.; Turski, M.; Fitzpatrick, M. E.; Edwards, L.; Smith, M. C. and Bouchard, P. J. (2008). Full field measurement of plastic flow properties in a multi-pass austenitic stainless steel weld specimen. In: O'Dowd, N. P. ed. Proceedings of the ASME Pressure Vessels and Piping Conference (PVP2008), Volume Vol 6,. ASME, pp. 403–414.

Griffiths, J.; Oliver, E. C.; Fitzpatrick, M. E.; Finlayson, T.; Viano, D. and Wang, Q. (2007). The fracture strength of Si particles in tensile specimens of Sr-modified A356 castings. In: Crepeau, Paul N.; Tiryakioğlu, Murat and Campbell, John eds. Shape Casting: 2nd International Symposium. Warrendale, PA: TMS (The Minerals, Metals and Materials Society), pp. 127–134.

Ganguly, S.; Fitzpatrick, M.E. and Edwards, L. (2006). Use of neutron and synchrotron X-ray diffraction for evaluation of residual stresses in a 2024-T351 Aluminum Alloy Variable-Polarity Plasma-Arc weld. Metallurgical and Materials Transactions A, 37(2) pp. 411–420.

Ganguly, Supriyo; Fitzpatrick, MIchael E. and Edwards, Lyndon (2004). Comparative neutron and synchrotron X-ray diffraction studies to determine residual stress on an as-welded AA2024 plate. In: Residual Stresses VII, ICRS7 . Proceedings of the 7th International Conference on Residual Stresses, ICRS-7, X’ian, China, 14-17 June 2004 (Denis, S.; Hanabusa, T.; He, B.P.; Mittemeijer, E.; Nan, J.; Noyan, I.C.; Scholtes, B.; Tanaka, K. and Xu, K.W. eds.), pp. 223–228.

Ghanem, F.; Sidhom, H.; Braham, C. and Fitzpatrick, M. E. (2002). Effect of near-surface residual stress and microstructure modification from machining on the fatigue endurance of a tool steel. Journal of Materials Engineering and Performance, 11(6) pp. 631–639.

Haigh, R.D.; Hutchings, Michael; Fitzpatrick, M.E..; James, J.A.; Okido, S.; Mizuno, R.; Ogawa, K. and Hughes, D.J. (2016). Residual stress characterization of single and triple-pass autogenously welded stainless steel pipes. International Journal of Pressure Vessels and Piping, 144 pp. 1–10.

• Download Accepted Manuscript (PDF / 3MB)

Haigh, R.D.; Hutchings, Michael; James, J. A.; Ganguly, S.; Mizuno, R.; Ogawa, K.; Okido, S.; Paradowska, A.M. and Fitzpatrick, M. E. (2013). Neutron diffraction residual stress measurements on girth-welded 304 stainless steel pipes with weld metal deposited up to half and full pipe wall thickness. International Journal of Pressure Vessels and Piping, 101 pp. 1–11.

• Download Accepted Manuscript (PDF / 3MB)

Hainsworth, S. V. and Fitzpatrick, M. E. (2007). Forensic engineering: applying materials and mechanics principles to the investigation of product failures. Forensic Science, Medicine and Pathology, 3(2) pp. 81–92.

Irving, P. E.; Zhang, X.; Doucet, J.; Figueroa-Gordon, D.; Boscolo, M.; Heinimann, M.; Shepherd, G.; Fitzpatrick, M. E. and Liljedahl, D. (2011). Life extension techniques for aircraft structures – extending durability and promoting damage tolerance through bonded crack retarders. In: ICAF 2011 Structural Integrity: Influence of Efficiency and Green Imperatives, pp. 753–770.

Johansson, S. and Fitzpatrick, M. E. (2001). Errors in crack closure measurements caused by flexure test fixture support effects. Experimental Mechanics, 41(1) pp. 47–51.

Khan, M. K.; Fitzpatrick, M. E.; Hainsworth, S. V.; Evans, A. D. and Edwards, L. (2011). Application of synchrotron X-ray diffraction and nanoindentation for the determination of residual stress fields around scratches. Acta Materialia, 59(20) pp. 7508–7520.

Khan, M. K.; Hainsworth, S. V.; Fitzpatrick, M. E. and Edwards, L. (2010). A combined experimental and finite element approach for determining mechanical properties of aluminium alloys by nanoindentation. Computational Materials Science, 49(4) pp. 751–760.

Khan, M. K.; Hainsworth, S. V.; Fitzpatrick, M. E. and Edwards, L. (2009). Application of the work of indentation approach for the characterization of aluminium 2024-T351 and Al cladding by nanoindentation. Journal of Materials Science, 44(4) pp. 1006–1015.

Khan, M. K.; Fitzpatrick, M. E.; Hainsworth, S. V. and Edwards, L. (2009). Effect of tool profile and fatigue loading on the local hardness around scratches in clad and unclad aluminium alloy 2024. Materials Science and Engineering A, 527(1-2) pp. 297–304.

• Download Accepted Manuscript (PDF / 952kB)

Kartal, M. E.; Liljedahl, C. D. M.; Gungor, S.; Edwards, L. and Fitzpatrick, M. E. (2008). Determination of the profile of the complete residual stress tensor in a VPPA weld using the multi-axial contour method. Acta Materialia, 56(16) pp. 4417–4428.

Kartal, M.; Molak, R.; Turski, M.; Gungor, S.; Fitzpatrick, M. E. and Edwards, L. (2007). Determination of weld metal mechanical properties utilising novel tensile testing methods. Applied Mechanics and Materials, 7-8 pp. 127–132.

Kartal, M.; Turski, M.; Johnson, G.; Fitzpatrick, M. E.; Gungor, S.; Withers, P.J. and Edwards, L. (2006). Residual stress measurements in single and multi-pass groove weld specimens using neutron diffraction and the contour method. Materials Science Forum, 524-525 pp. 671–676.

Leo, Jose Rodolpho de Oliveira and Fitzpatrick, Michael E. (2024). Development of a Diffusion Bonding Route for Joining Oxide-Dispersion-Strengthened (ODS) Steels for Nuclear Applications. Metallurgical and Materials Transactions A, 55(3) pp. 827–838.

• Download Published Version (PDF / 2MB)

Liljedahl, C. D. M.; Fitzpatrick, M. E.; Zanellato, O. and Edwards, L. (2011). Effect of temperature on the residual stresses in an integral structure with a crack-retarding patch. Strain, 47(S2) pp. 293–298.

Liljedahl, C. D. M.; Zanellato, O.; Fitzpatrick, M. E.; Lin, J. and Edwards, L. (2010). The effect of weld residual stresses and their re-distribution with crack growth during fatigue under constant amplitude loading. International Journal of Fatigue, 32(4) pp. 735–743.

• Download Accepted Manuscript (PDF / 1MB)

Lawes, S. D. A.; Hainsworth, S. V. and Fitzpatrick, M. E. (2010). Impact wear testing of diamond-like carbon films for engine valve-tappet surfaces. Wear, 268(11-12) pp. 1303–1308.

Liljedahl, C. D. M.; Fitzpatrick, M. E. and Edwards, L. (2009). Evolution of residual stresses with fatigue crack growth in integral structures with crack retarders. Materials Science and Engineering A, 523(1-2) pp. 152–159.

• Download Accepted Manuscript (PDF / 1MB)

Liljedahl, C. D. M.; Brouard, J.; Zanellato, O.; Lin, J.; Tan, M. L.; Ganguly, S.; Irving, P. E.; Fitzpatrick, M. E.; Zhang, X. and Edwards, L. (2009). Weld residual stress effects on fatigue crack growth behaviour of aluminium alloy 2024-T351. International Journal of Fatigue, 31(6) pp. 1081–1088.

Liljedahl, C. D. M.; Fitzpatrick, M. E. and Edwards, L. (2008). Residual stresses in structures reinforced with adhesively bonded straps designed to retard fatigue crack growth. Composite Structures, 86(4) pp. 344–355.

Liljedahl, C. D. M.; Zanellato, O.; Edwards, L. and Fitzpatrick, M. E. (2008). Evolution of Residual Stresses with Fatigue Crack Growth in a Variable Polarity Plasma Arc–Welded Aluminum Alloy Compact Tension Specimen. Metallurgical and Materials Transactions A, 39(10) pp. 2370–2377.

Liljedahl, C. D. M.; Tan, M. L.; Zanellato, O.; Ganguly, S.; Fitzpatrick, M. E. and Edwards, L. (2008). Evolution of residual stresses with fatigue loading and subsequent crack growth in a welded aluminium alloy middle tension specimen. Engineering Fracture Mechanics, 75(13) pp. 3881–3894.

Liljedahl, C. D. M.; Fitzpatrick, M. E. and Edwards, L. (2008). Distortion and residual stresses in structures reinforced with titanium straps for improved damage tolerance. Materials Science and Engineering A, 486(1-2) pp. 104–111.

Lawes, S. D. A.; Fitzpatrick, M. E. and Hainsworth, S. V (2007). Evaluation of the tribological properties of DLC for engine applications. Journal of Physics D: Applied Physics, 40(18) pp. 5427–5437.

Lewis, P. R. and Fitzpatrick, M. E. (2006). Intellectual Property Topics in Open University Distance-Taught Courses. In: Doyle, S. and Mannis, A. eds. Proceedings of the International Conference on Innovation, Good Practice and Research in Engineering Education 2006. UK: Higher Education Academy, pp. 507–511.

• Download Published Version (PDF / 221kB)

Mathew, J.; Moat, R.J.; Paddea, S.; Francis, J.A.; Fitzpatrick, M.E. and Bouchard, P.J. (2017). Through-Thickness Residual Stress Profiles in Austenitic Stainless Steel Welds: A Combined Experimental and Prediction Study. Metallurgical and Materials Transactions A, 48(12) pp. 6178–6191.

• Download Accepted Manuscript (PDF / 2MB)
• Download Published Version (PDF / 3MB)
• Download Unspecified Version (PDF / 0B)

Mathew, J.; Moat, R. J.; Paddea, S.; Fitzpatrick, M. E. and Bouchard, P. J. (2017). Prediction of residual stresses in girth welded pipes using an artificial neural network approach. International Journal of Pressure Vessels and Piping, 150 pp. 89–95.

• Download Accepted Manuscript (PDF / 3MB)

Moffatt, J. E.; Fitzpatrick, M. E. and Edwards, L. (2013). Effect of frequency on high-temperature fatigue crack growth in a silicon carbide reinforced silicon nitride composite. International Journal of Fatigue, 47 pp. 319–329.

Meixner, M.; Fitzpatrick, M. E and Reimers, W. (2011). Measurement of the evolution of internal strain and load partitioning in magnesium hybrid composites under compression load using in-situ synchrotron X-ray diffraction analysis. Composites Science and Technology, 71(2) pp. 167–176.

Nadri, B.; Edwards, L.; Fitzpatrick, M.E. and Lodini, A. (2004). Measurement of residual stresses following overloading of cold expanded holes using the X-ray diffraction technique and finite element method. Journal of Neutron Research, 12(1-3) pp. 219–224.

Perumal, Bama; Gungor, Salih; Kockelmann, W.; Fitzpatrick, Michael E. and Bhavani, P. (2021). Texture Evolution during Thermal Processing of Ti-6Al-4V: A Neutron Diffraction Study. SVOA Materials Science and Technology, 3(2) pp. 13–23.

• Download Published Version (PDF / 1MB)

Perumal, Bama; Rist, Martin A.; Gungor, Salih; Brooks, Jeffery W. and Fitzpatrick, Michael E. (2016). The Effect of Hot Deformation Parameters on Microstructure Evolution of the α-Phase in Ti-6Al-4V. Metallurgical and Materials Transactions A, 47(8) pp. 4128–4136.

• Download Published Version (PDF / 4MB)

Paradowska, Anna M.; Tremsin, Anton; Kelleher, Joe F.; Zhang, Shu Yen; Paddea, Sanjooram; Burca, Genoveva; James, Jon A.; Ahmed, Rehan; Faisal, Nadimul H.; Grazzi, Francesco; Festa, Giulia; Andreani, Carla; Civita, Francesco; Bouchard, Peter J.; Kockelman, Winfried and Fitzpatrick, Michael E. (2012). Modern and historical engineering concerns investigated by neutron diffraction on ENGIN-X. Journal of Solid Mechanics and Materials Engineering, 6(6) pp. 408–418.

Preuss, M.; Frankel, P.; Lozano-Perez, S.; Hudson, D.; Polatidis, E.; Ni, N.; Wei, J.; English, C.; Storer, S.; Chong, K. B.; Fitzpatrick, M. E.; Wang, P.; Smith, J.; Grovenor, C.; Smith, G.; Sykes, J.; Cottis, B.; Lyon, S.; Hallstadius, L.; Comstock, B.; Ambard, A. and Blat-Yrieix, M. (2011). Studies regarding corrosion mechanisms in zirconium alloys. Journal of ASTM International, 8(9)

Pratihar, S.; Ganguly, S.; James, J. A.; Fitzpatrick, M. E. and Edwards, L. (2007). Non-destructive determination of the 3D residual stress in a AA7050 upper wing skin-stringer panel using neutron diffraction. Journal of Neutron Research, 15(3-4) pp. 293–301.

Pratihar, S.; Stelmukh, V.; Hutchings, Michael; Fitzpatrick, M.E.; Stuhr, U. and Edwards, L. (2006). Measurement of the residual stress field in MIG-welded Al-2024 and Al-7150 aluminium alloy compact tension specimens. Materials Science and Engineering A, 437(1) pp. 46–53.

Rao, Ashwin; Bouchard, P. John; Northover, Shirley M. and Fitzpatrick, Michael E. (2012). Anelasticity in austenitic stainless steel. Acta Materialia, 60(19) pp. 6851–6861.

Rao, Ashwin; Chong, Kok; Bouchard, Peter and Fitzpatrick, M. E. (2011). Internal stress generation in austentic stainless steels during creep deformation. In: 2011 ASME Pressure Vessels and Piping Conference, 17-21 Jul 2011, Baltimore, MD, USA.

Rao, Ashwin; Bouchard, Peter and Fitzpatrick, M. E. (2010). Anelasticity in austenitic steels. Ceramic Transactions, 222 pp. 133–143.

Rahman, M.; Fitzpatrick, M.E.; Edwards, L.; Pratihar, S.; Peel, M.E.; Steuwer, A. and Buslaps, T. (2008). Investigation of the stress fields around a fatigue crack in aluminium alloy 5091. Materials Science Forum, 571-572 pp. 119–124.

Simm, T. H.; Das, Y. B.; Forsey, A. N.; Gungor, S.; Fitzpatrick, M. E.; Prakash, D. G. L.; Moat, R. J.; Birosca, S.; da Fonseca, J. Quinta and Perkins, K. M. (2020). The τ-plot, a multicomponent 1-D pole figure plot, to quantify the heterogeneity of plastic deformation. Materials Characterization, 160, article no. 110114.

• Download Accepted Manuscript (PDF / 4MB)

Smyth, Niall A.; Toparli, M. Burak; Fitzpatrick, Michael E. and Irving, Phil E. (2019). Recovery of fatigue life using laser peening on 2024‐T351 aluminium sheet containing scratch damage: The role of residual stress. Fatigue & Fracture of Engineering Materials and Structures, 42(5) pp. 1161–1174.

Syed, Abdul Khadar; Fitzpatrick, Michael E. and Moffatt, James E (2016). Residual stresses in aerospace structures reinforced with bonded crack retarders. The Journal of Strain Analysis for Engineering Design, 51(2) pp. 170–175.

Storer, S. C.; Fitzpatrick, M. E.; Hainsworth, S. V. and Rist, M. A. (2016). Experimental study of room-temperature indentation viscoplastic ‘creep’ in zirconium. Philosophical Magazine. Part A: Materials Science, 96(24) pp. 2547–2563.

Steuwer, A.; Rahman, M; Shterenlikht, A.; Fitzpatrick, M. E.; Edwards, L. and Withers, P.J. (2010). The evolution of crack-tip stresses during a fatigue overload event. Acta Materialia, 58(11) pp. 4039–4052.

Steuwer, A.; Edwards, L.; Pratihar, S.; Ganguly, S.; Peel, M.; Fitzpatrick, M. E.; Marrow, T. J.; Withers, P. J.; Sinclair, I.; Singh, K. D.; Gao, N.; Buslaps, T. and Buffière, J.-Y. (2006). In situ analysis of cracks in structural materials using synchrotron X-ray tomography and diffraction. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 246(1) pp. 217–225.

Schneider, L.C.R.; Hainsworth, S.V.; Cocks, A.C.F. and Fitzpatrick, M.E. (2005). Neutron diffraction measurements of residual stress in a powder metallurgy component. Scripta Materialia, 52(9) pp. 917–921.

Stefanescu, D.; Steuwer, A.; Owen, R. A.; Nadri, B.; Edwards, L.; Fitzpatrick, M. E. and Withers, P. J. (2004). Elastic strains around cracked cold-expanded fastener holes measured using the synchrotron X-ray diffraction technique. Journal of Strain Analysis for Engineering Design, 39(5) pp. 459–469.

Stefanescu, D.; Santisteban, J.R.; Edwards, L. and Fitzpatrick, M. E. (2004). Residual stress measurement and fatigue crack growth prediction after cold expansion of cracked fastener holes. Journal of Aerospace Engineering, 17(3) pp. 917–97.

Schneider, L.C.R.; Fitzpatrick, M.E.; Daymond, M.R.; Hainsworth, S.V. and Cocks, A.C.F. (2004). Measurement of Residual Stress in a Powder Metallurgy Aluminium-SiC Composite. Journal of Neutron Research, 12(1-3) pp. 129–133.

Steuwer, A.; Santisteban, J. R.; Withers, P. J.; Edwards, L. and Fitzpatrick, M. E. (2003). In situ determination of stresses from time-of-flight neutron transmission spectra. Journal of Applied Crystallography, 36(5) pp. 1159–1168.

Stefanescu, D.; Dutta, M; Wang, D. Q.; Edwards, L. and Fitzpatrick, M. E. (2003). The effect of high compressive loading on residual stresses and fatigue crack growth at cold expanded holes. Journal of Strain Analysis for Engineering Design, 38(5) pp. 419–427.

Stefanescu, D.; Edwards, L. and Fitzpatrick, M.E. (2003). Stress intensity factor correction for asymmetric through-thickness fatigue cracks at holes. International Journal of Fatigue, 25(7) pp. 569–576.

Santisteban, J.R.; Edwards, L.; Fitzpatrick, M.E.; Steuwer, A. and Withers, P.J. (2002). Engineering applications of Bragg-edge neutron transmission. Applied Physics A: Materials Science & Processing, 74(1) s1433-s1436.

Santisteban, J. R.; Steuwer, A.; Edwards, L.; Withers, P. J. and Fitzpatrick, M. E. (2002). Mapping of unstressed lattice parameters using pulsed neutron transmission diffraction. Journal of Applied Crystallography, 35(4) pp. 497–504.

Santisteban, J. R.; Edwards, L.; Fitzpatrick, M. E.; Steuwer, A.; Withers, P. J.; Daymond, M. R.; Johnson, M. W.; Rhodes, N. and Schooneveld, E. M. (2002). Strain imaging by Bragg edge neutron transmission. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 481(1-3) pp. 765–768.

Steuwer, A.; Withers, P. J.; Santisteban, J. R.; Edwards, L.; Bruno, G.; Fitzpatrick, M. E.; Daymond, M. R.; Johnson, M. W. and Wang, D. (2001). Bragg edge determination for accurate lattice parameter and elastic strain measurement. Physica Status Solidi (a), 185(2) pp. 221–230.

Toparli, M. B. and Fitzpatrick, M. E. (2016). Development and Application of the Contour Method to Determine the Residual Stresses in Thin Laser-Peened Aluminium Alloy Plates. Experimental Mechanics, 56(2) pp. 323–330.

Toparli, M. Burak; Fitzpatrick, Michael E. and Gungor, Salih (2015). Determination of multiple near-surface residual stress components in laser peened aluminum alloy via the contour method. Metallurgical and Materials Transactions A, 46(9) pp. 4268–4275.

Toparli, M. B.; Fitzpatrick, M. E. and Gungor, S. (2013). Improvement of the contour method for measurement of near-surface residual stresses from laser peening. Experimental Mechanics, 53(9) pp. 1705–1718.

Toparli, M. Burak and Fitzpatrick, Michael E. (2011). Residual stresses induced by laser peening of thin aluminium plates. Materials Science Forum, 681 pp. 504–509.

Tan, Jeffrey Meng-Lee; Fitzpatrick, Michael E. and Edwards, Lyndon (2007). Stress intensity factors for through-thickness cracks in a wide plate: Derivation and application to arbitrary weld residual stress fields. Engineering Fracture Mechanics, 74(13) pp. 2030–2054.

Tan, Jeffrey Meng-Lee; Fitzpatrick, Michael E. and Edwards, Lyndon (2006). A Novel Closed-Form Calculation of the Stress Intensity Factor for a Crack in a Residual Stress Field. Materials Science Forum, 524-525 pp. 83–88.

Turski, M.; Pratihar, S.; Edwards, L.; Daymond, M.R. and Fitzpatrick, M.E. (2006). The Effect of Plastic Anisotropy on the Residual Stress within a 316L Stainless Steel Bead-on-Plate Specimen. Materials Science Forum, 524-525 pp. 679–684.

Uhure, N. J.; Fitzpatrick, M. E. and Hainsworth, S. V. (2007). Effect of substrate surface roughness on mechanical properties of diamond-like carbon coatings. Tribology - Materials Surfaces and Interfaces, 1(4) pp. 211–223.

Wierzbanowski, K.; Wroński, S.; Baczmański, A.; Wróbel, M.; Fitzpatrick, M.; Braham, Ch. and Lodini, A. (2007). Variation of residual stresses during cross-rolling. Journal of Neutron Research, 15(3-4) pp. 275–280.

Wierzbanowski, K.; Wronski, S.; Baczmanski, A.; Wrobel, M.; Braham, C.; Fitzpatrick, M. and Lodini, A. (2006). Residual stresses induced by cross-rolling. Materials Science Forum, 524-525 pp. 63–68.

Wei, L. W.; Edwards, L. and Fitzpatrick, M. E. (2002). FE analysis of stresses and stress intensity factors of interfacial cracks in a CTS specimen. Engineering Fracture Mechanics, 69(1) pp. 85–90.

Zhang, Hongtao; Gorley, Michael J.; Chong, Kok Boon; Fitzpatrick, Michael E.; Roberts, Steve G. and Grant, Patrick S. (2014). An in situ powder neutron diffraction study of nano-precipitate formation during processing of oxide-dispersion-strengthened ferritic steels. Journal of Alloys and Compounds, 582 pp. 769–773.

Zhang, S. Y.; Godfrey, E.; Kockelmann, W.; Paradowska, A.; Bull, M. J.; Korsunsky, A. M.; Abbey, B.; Xu, P.; Tomota, Y.; Liljedahl, D.; Zanellato, O.; Fitzpatrick, M. E.; Daymond, M. R.; Toda, R. M.; Holt, R. A.; Kelleher, J.; Siano, S. and Santisteban, J. (2009). High-tech composites to ancient metals. Materials Today, 12(7-8) pp. 78–84.

Zanellato, O.; Fitzpatrick, M.E.; Daymond, M.R.; Edwards, L. and Turski, M. (2008). Development of Intergranular Stresses during In-situ Compression Tests in Zircaloy-4. Materials Science Forum, 571-572 pp. 149–154.

Zhang, Y.; Fitzpatrick, M. E. and Edwards, L. (2005). Analysis of the residual stress around a cold-expanded fastener hole in a Finite Plate. Strain, 41(2) pp. 59–70.

Zhang, Y.; Ganguly, S.; Edwards, L. and Fitzpatrick, M.E. (2004). Cross-sectional mapping of residual stresses in a VPPA weld using the contour method. Acta Materialia, 52(17) pp. 5225–5232.

Zhang, Ying; Pratihar, S.; Fitzpatrick, Michael E. and Edwards, Lyndon (2004). Residual stress mapping in welds using the contour method. In: Materials Science Forum (Denis, S.; Hanabusa, T.; He, B. P.; Mittemeijer, E.; Nan, J.; Noyan, I. C.; Scholtes, B.; Tanaka, K. and Xu, K. W. eds.), 490-491 pp. 294–299.

Zhang, Y.; Ganguly, S.; Stelmukh, V.; Fitzpatrick, M. E. and Edwards, L. (2003). Validation of the Contour Method of Residual Stress Measurement in a MIG 2024 Weld by Neutron and Synchrotron X-ray Diffraction. Journal of Neutron Research, 11(4) pp. 181–185.