Currently browsing: Items authored or edited by Lyndon Edwards

84 items in this list.
Generated on Sat Nov 9 22:02:59 2024 GMT.

ATo Top

Ahmed, R.; Yu, H. Q.; Stoica, V.; Edwards, L. and Santisteban, J. R. (2008). Neutron diffraction residual strain measurements in post-treated thermal spray cermet coatings. Materials Science and Engineering A, 498(1-2) pp. 191–202.

Ahmed, R.; Yu, H.; Stewart, S.; Edwards, L. and Santisteban, J. R. (2007). Residual strain measurements in thermal spray cermet coatings via neutron diffraction. Journal of Tribology, 129(2) pp. 411–418.

Ahmad, H. Y.; Fitzpatrick, M. E.; Wallhead, I. R. and Edwards, L. (1996). Measurements of stress intensity factors of an interface crack under mixed mode loading. Journal of Adhesion, 56(1-4) pp. 187–204.

BTo Top

Bouchard, P. J.; Edwards, L.; Youtsos, A. G. and Dennis, R. J. (2006). Development of a residual stress simulation benchmark for a single bead-on-plate benchmark. In: ASME 2006 Pressure Vessels and Piping Conference (PVP2006), 23-27 Jul 2006, Vancouver, BC, Canada, American Society of Mechanical Engineers, New York.

Bouchard, P. J.; George, D.; Santisteban, J. R.; Bruno, G.; Dutta, M.; Edwards, L.; Kingston, E. and Smith, D. J. (2005). Measurement of the residual stresses in a stainless steel pipe girth weld containing long and short repairs. International Journal of Pressure Vessels and Piping, 82(4) pp. 299–310.

Balart, M.J.; Bouzina, A.; Edwards, L. and Fitzpatrick, M.E. (2004). The onset of tensile residual stresses in grinding of hardened steels. Materials Science and Engineering: A, 367(1-2) pp. 132–142.

DTo Top

ETo Top

Edwards, L.; Bouchard, P.J.; Dutta, M.; Wang, D.Q.; Santisteban, J.R.; Hiller, S. and Fitzpatrick, M.E. (2005). Direct measurement of the residual stresses near a 'boat-shaped' repair in a 20 mm thick stainless steel tube butt weld. International Journal of Pressure Vessels and Piping, 82(4) pp. 288–298.

FTo Top

Ferrie, Emilie; Buffiere, Jean-Yves; Ludwig, Wolfgang; Gravouil, Anthony and Edwards, Lyndon (2006). Fatigue crack propagation: in situ visualization using X-ray microtomography and 3D simulation using the extended finite element method. Acta Materialia, 54(4) pp. 1111–1122.

Fitzpatrick, M. E. and Edwards, L. (1998). Fatigue Crack/Residual Stress Field Interactions and Their Implications for Damage-Tolerant Design. Journal of Materials Engineering and Performance, 7(2) pp. 190–198.

GTo Top

Ganguly, S.; Stelmukh, V.; Fitzpatrick, M. E. and Edwards, L. (2008). Analysis of residual stress in metal-inert-gas-welded Al-2024 using neutron and synchrotron X-ray diffraction. Materials Science and Engineering A, 491(1-2) pp. 248–257.

Ganguly, S.; Turski, M.; Fitzpatrick, M. E.; Edwards, L.; Smith, M. C. and Bouchard, P. J. (2008). Full field measurement of plastic flow properties in a multi-pass austenitic stainless steel weld specimen. In: O'Dowd, N. P. ed. Proceedings of the ASME Pressure Vessels and Piping Conference (PVP2008), Volume Vol 6,. ASME, pp. 403–414.

Ganguly, Supriyo; Fitzpatrick, MIchael E. and Edwards, Lyndon (2004). Comparative neutron and synchrotron X-ray diffraction studies to determine residual stress on an as-welded AA2024 plate. In: Residual Stresses VII, ICRS7 . Proceedings of the 7th International Conference on Residual Stresses, ICRS-7, X’ian, China, 14-17 June 2004 (Denis, S.; Hanabusa, T.; He, B.P.; Mittemeijer, E.; Nan, J.; Noyan, I.C.; Scholtes, B.; Tanaka, K. and Xu, K.W. eds.), pp. 223–228.

JTo Top

James, Jonathan A. and Edwards, Lyndon (2007). Application of robot kinematics methods to the simulation and control of neutron beam line positioning systems. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 571(3) pp. 709–718.

KTo Top

Kartal, M.; Molak, R.; Turski, M.; Gungor, S.; Fitzpatrick, M. E. and Edwards, L. (2007). Determination of weld metal mechanical properties utilising novel tensile testing methods. Applied Mechanics and Materials, 7-8 pp. 127–132.

LTo Top

Liljedahl, C. D. M.; Brouard, J.; Zanellato, O.; Lin, J.; Tan, M. L.; Ganguly, S.; Irving, P. E.; Fitzpatrick, M. E.; Zhang, X. and Edwards, L. (2009). Weld residual stress effects on fatigue crack growth behaviour of aluminium alloy 2024-T351. International Journal of Fatigue, 31(6) pp. 1081–1088.

MTo Top

Mulyadi, M.; Rist, M.; Edwards, L.; Brooks, J. W. and Wilson, A. F. (2007). A hot deformation model for two-phase titanium alloys based on an internal state-variable approach. In: Niinomi, M.; Akiyama, S.; Ikeda, M.; Hagiwara, M. and Maruyama, K. eds. Ti-2007 Science and Technology, Volume 1. Sendai, Japan: The Japan Institute of Metals, pp. 315–318.

Molak, R. M.; Kartal, M.; Pakiela, Z.; Manaj, W.; Turski, M.; Hiller, S.; Gungor, S.; Edwards, L. and Kurzydłowski, K. J. (2007). Use of micro tensile test samples in determining the remnant life of pressure vessel steels. Applied Mechanics and Materials, 7-8 pp. 187–194.

Mulyadi, M.; Rist, M.A.; Edwards, L. and Brooks, J.W. (2006). Parameter optimisation in constitutive equations for hot forging. Journal of Materials Processing Technology, 177(1-3) pp. 311–314.

NTo Top

OTo Top

Özdemir, A. Tamer and Edwards, Lyndon (2004). Through-thickness residual stress distribution after the cold expansion of fastener holes and its effect on fracturing. Journal of Engineering Materials and Technology, 126(1) pp. 129–136.

PTo Top

Polido Gomes, J.; Kowal, J. and Edwards, L. (2005). An electrostatic actuated micro-structure for high-cycle fatigue testing. In: Proceedings of the 2005 SEM Annual Conference and Exposition on Experimental and Applied Mechanics, 7-9 Jun 2005, Portland, Oregon, USA.

RTo Top

Rahman, M.; Fitzpatrick, M.E.; Edwards, L.; Pratihar, S.; Peel, M.E.; Steuwer, A. and Buslaps, T. (2008). Investigation of the stress fields around a fatigue crack in aluminium alloy 5091. Materials Science Forum, 571-572 pp. 119–124.

Rist, Martin; Mulyadi, M.; Edwards, Lyndon and Brooks, J.W. (2005). Optimisation and confidence region estimation of constitutive parameters in equations for hot metal deformation. In: Banabic, D. ed. Proceedings of the 8th Esaform Conference on Material Forming, Volume 1. Bucuresti, Romania: The Publishing House of the Romanian Academy, pp. 61–64.

STo Top

Steuwer, A.; Rahman, M; Shterenlikht, A.; Fitzpatrick, M. E.; Edwards, L. and Withers, P.J. (2010). The evolution of crack-tip stresses during a fatigue overload event. Acta Materialia, 58(11) pp. 4039–4052.

Santisteban, J.R.; Daymond, M.R.; James, J.A. and Edwards, L. (2006). ENGIN-X: A third-generation neutron strain scanner. Journal of Applied Crystallography, 39(6) pp. 812–825.

Santisteban, J. R.; Oliver, E. C.; Daymond, M. R.; Alianelli, L. and Edwards, L. (2006). Tensile deformation of a Cu mosaic crystal along the [110] direction studied by time of flight neutron transmission. Materials Science and Engineering A, 437(1) pp. 151–156.

Steuwer, A.; Edwards, L.; Pratihar, S.; Ganguly, S.; Peel, M.; Fitzpatrick, M. E.; Marrow, T. J.; Withers, P. J.; Sinclair, I.; Singh, K. D.; Gao, N.; Buslaps, T. and Buffière, J.-Y. (2006). In situ analysis of cracks in structural materials using synchrotron X-ray tomography and diffraction. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 246(1) pp. 217–225.

Santisteban, J. R.; Fernandez, L.; Corsco, H.; Martinez, R. L.; Boccanera, L.; Edwards, L.; James, J. A. and Turski, M. (2006). Post-weld heat treatment stress relaxation in Zircaloy 4 plasma welds. Materials Science Forum, 524-525 pp. 491–496.

Steuwer, A.; Withers, P. J.; Santisteban, J. R. and Edwards, L. (2005). Using pulsed neutron transmission for crystalline phase imaging and analysis. Journal of Applied Physics, 97(7), article no. 074903.

Stefanescu, D.; Steuwer, A.; Owen, R. A.; Nadri, B.; Edwards, L.; Fitzpatrick, M. E. and Withers, P. J. (2004). Elastic strains around cracked cold-expanded fastener holes measured using the synchrotron X-ray diffraction technique. Journal of Strain Analysis for Engineering Design, 39(5) pp. 459–469.

Steuwer, A.; Santisteban, J. R.; Withers, P. J. and Edwards, L. (2004). Pattern decomposition and quantitative-phase analysis in pulsed neutron transmission. Physica B: Condensed Matter, 350(1-3) pp. 159–161.

Steuwer, A.; Santisteban, J. R.; Withers, P. J.; Edwards, L. and Fitzpatrick, M. E. (2003). In situ determination of stresses from time-of-flight neutron transmission spectra. Journal of Applied Crystallography, 36(5) pp. 1159–1168.

Stefanescu, D.; Dutta, M; Wang, D. Q.; Edwards, L. and Fitzpatrick, M. E. (2003). The effect of high compressive loading on residual stresses and fatigue crack growth at cold expanded holes. Journal of Strain Analysis for Engineering Design, 38(5) pp. 419–427.

Stefanescu, D.; Edwards, L. and Fitzpatrick, M.E. (2003). Stress intensity factor correction for asymmetric through-thickness fatigue cracks at holes. International Journal of Fatigue, 25(7) pp. 569–576.

Santisteban, J.R.; Edwards, L.; Fitzpatrick, M.E.; Steuwer, A. and Withers, P.J. (2002). Engineering applications of Bragg-edge neutron transmission. Applied Physics A: Materials Science & Processing, 74(1) s1433-s1436.

Santisteban, J. R.; Steuwer, A.; Edwards, L.; Withers, P. J. and Fitzpatrick, M. E. (2002). Mapping of unstressed lattice parameters using pulsed neutron transmission diffraction. Journal of Applied Crystallography, 35(4) pp. 497–504.

Santisteban, J. R.; Edwards, L.; Fitzpatrick, M. E.; Steuwer, A.; Withers, P. J.; Daymond, M. R.; Johnson, M. W.; Rhodes, N. and Schooneveld, E. M. (2002). Strain imaging by Bragg edge neutron transmission. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 481(1-3) pp. 765–768.

Santisteban, J.R.; Edwards, L.; Steuwer, A. and Withers, P. J. (2001). Time-of-flight neutron transmission diffraction. Journal of Applied Crystallography, 34(3) pp. 289–297.

TTo Top

Turski, M.; Smith, M. C.; Bouchard, P. J.; Edwards, L. and Withers, P. J. (2009). Spatially resolved materials property data from a uniaxial cross-weld tensile test. Journal of Pressure Vessel Technology, 131(6) pp. 1–7.

Turski, M. and Edwards, L. (2009). Residual stress measurement of a 316l stainless steel bead-on-plate specimen utilising the contour method. International Journal of Pressure Vessels and Piping, 86(1) pp. 126–131.

Turski, M.; Edwards, L.; James, J.; Bouchard, P. J.; Smith, M. C. and Withers, P. J. (2006). Residual stress measurement within a single pass groove weld specimen utilising neutron diffraction and the contour method. In: ASME 2006 Pressure Vessels and Piping Conference (PVP2006), 23-27 Jul 2006, Vancouver, BC, Canada, American Society of Mechanical Engineers, New York.

WTo Top

Withers, P. J.; Turski, M.; Edwards, L.; Bouchard, P. J. and Buttle, D. J. (2008). Recent advances in residual stress measurement. International Journal of Pressure Vessels and Piping, 85(3) pp. 118–127.

ZTo Top

Zhang, Ying; Pratihar, S.; Fitzpatrick, Michael E. and Edwards, Lyndon (2004). Residual stress mapping in welds using the contour method. In: Materials Science Forum (Denis, S.; Hanabusa, T.; He, B. P.; Mittemeijer, E.; Nan, J.; Noyan, I. C.; Scholtes, B.; Tanaka, K. and Xu, K. W. eds.), 490-491 pp. 294–299.

Export

Subscribe to these results

get details to embed this page in another page Embed as feed [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0