Currently browsing: Items authored or edited by Javier Santisteban

Santisteban, J.R.; Daymond, M.R.; James, J.A. and Edwards, L. (2006). ENGIN-X: A third-generation neutron strain scanner. Journal of Applied Crystallography, 39(6) pp. 812–825.

Santisteban, J. R.; Oliver, E. C.; Daymond, M. R.; Alianelli, L. and Edwards, L. (2006). Tensile deformation of a Cu mosaic crystal along the [110] direction studied by time of flight neutron transmission. Materials Science and Engineering A, 437(1) pp. 151–156.

Santisteban, J. R.; Fernandez, L.; Corsco, H.; Martinez, R. L.; Boccanera, L.; Edwards, L.; James, J. A. and Turski, M. (2006). Post-weld heat treatment stress relaxation in Zircaloy 4 plasma welds. Materials Science Forum, 524-525 pp. 491–496.

Steuwer, A.; Santisteban, Javier; Turski, M.; Withers, P. J. and Buslaps, T. (2005). High-resolution strain mapping in bulk samples using full-profile analysis of energy dispersive synchrotron X-ray diffraction data. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 238(1-4) pp. 200–204.

Edwards, L.; Bouchard, P.J.; Dutta, M.; Wang, D.Q.; Santisteban, J.R.; Hiller, S. and Fitzpatrick, M.E. (2005). Direct measurement of the residual stresses near a 'boat-shaped' repair in a 20 mm thick stainless steel tube butt weld. International Journal of Pressure Vessels and Piping, 82(4) pp. 288–298.

Bouchard, P. J.; George, D.; Santisteban, J. R.; Bruno, G.; Dutta, M.; Edwards, L.; Kingston, E. and Smith, D. J. (2005). Measurement of the residual stresses in a stainless steel pipe girth weld containing long and short repairs. International Journal of Pressure Vessels and Piping, 82(4) pp. 299–310.

Steuwer, A.; Withers, P. J.; Santisteban, J. R. and Edwards, L. (2005). Using pulsed neutron transmission for crystalline phase imaging and analysis. Journal of Applied Physics, 97(7), article no. 074903.

• Download Published Version (PDF / 509kB)

James, J.A.; Santisteban, J.R.; Edwards, L. and Daymond, M.R. (2004). A virtual laboratory for neutron and synchrotron strain scanning. Physica B: Condensed Matter, 350(1-3, Suppl) E743-E746.

Dann, J.A.; Daymond, M.R.; Edwards, L.; James, J. and Santisteban, J.R. (2004). A comparison between Engin and Engin-X, a new diffractometer optimized for stress measurement. Physica B: Condensed Matter, 350(1-3) pp. 511–514.

Stefanescu, D.; Santisteban, J.R.; Edwards, L. and Fitzpatrick, M. E. (2004). Residual stress measurement and fatigue crack growth prediction after cold expansion of cracked fastener holes. Journal of Aerospace Engineering, 17(3) pp. 917–97.

Steuwer, A.; Santisteban, J. R.; Turski, M.; Withers, P. J. and Buslaps, T. (2004). High-resolution strain mapping in bulk samples using full-profile analysis of energy-dispersive synchrotron X-ray diffraction data. Journal of Applied Crystallography, 37(6) pp. 883–889.

Steuwer, A.; Santisteban, J. R.; Withers, P. J.; Edwards, L. and Fitzpatrick, M. E. (2003). In situ determination of stresses from time-of-flight neutron transmission spectra. Journal of Applied Crystallography, 36(5) pp. 1159–1168.

Santisteban, J. R.; Steuwer, A.; Edwards, L.; Withers, P. J. and Fitzpatrick, M. E. (2002). Mapping of unstressed lattice parameters using pulsed neutron transmission diffraction. Journal of Applied Crystallography, 35(4) pp. 497–504.

Santisteban, J.R.; Edwards, L.; Steuwer, A. and Withers, P. J. (2001). Time-of-flight neutron transmission diffraction. Journal of Applied Crystallography, 34(3) pp. 289–297.