Currently browsing: Items authored or edited by Jon James

Northover, Peter; Northover, Shirley; Malamud, Florencia; Kelleher, Joe and James, Jon (2014). Analysis and metallography of copper and brass components from Alum Bay. In: Satchell, Julie and Whitewright, Julian eds. The Maritime Archaeology of Alum Bay: Two shipwrecks on the north-west coast of the Isle of Wight, England. BAR British series (608). Oxford: Archaopress, pp. 48–55.

Dye, D.; Roder, B.A.; Tin, S.; Rist, M.A.; James, J.A. and Daymond, M.R. (2004). Modeling and measurement of residual stresses in a forged IN718 superalloy disc. In: ed. Superalloys 2004. Warrendal, PA, USA: Minerals, Metals and Materials Society, pp. 315–322.

Fedrigo, Anna; James, Jon; Zhang, Shu Yan; Salvemini, Filomena and Grazzi, Francesco (2021). On the protective effect of the stress distribution on a lamellar Edo period Samurai helmet: a neutron diffraction study. Archaeological and Anthropological Sciences, 13(6)

Malamud, Florencia; Northover, Shirley; James, Jon; Northover, Peter; Nneji, Stephen and Kelleher, Joe (2017). Spatially resolved texture analysis of Napoleonic War era copper bolts. Journal of Applied Crystallography, 50(5) pp. 1–17.

• Download Accepted Manuscript (PDF / 4MB)

Marais, D.; Venter, A.; Markgraaff, J. and James, J. (2017). Sample positioning in neutron diffraction experiments using a multi-material fiducial marker. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 841 pp. 12–16.

• Download Accepted Manuscript (PDF / 1MB)

Haigh, R.D.; Hutchings, Michael; Fitzpatrick, M.E..; James, J.A.; Okido, S.; Mizuno, R.; Ogawa, K. and Hughes, D.J. (2016). Residual stress characterization of single and triple-pass autogenously welded stainless steel pipes. International Journal of Pressure Vessels and Piping, 144 pp. 1–10.

• Download Accepted Manuscript (PDF / 3MB)

Malamud, Florencia; Northover, Shirley; James, Jon; Northover, Peter and Kelleher, Joe (2016). Texture analysis of Napoleonic War Era copper bolts. Applied Physics A: Materials Science & Processing, 122(276) pp. 1–12.

Nneji, S. O.; Zhang, S. Y.; Kabra, S.; Moat, R. J. and James, J. A. (2016). Modelling and control of neutron and synchrotron beamline positioning systems. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 813 pp. 123–131.

Holden, Tom M.; Traore, Yeli; James, Jon; Kelleher, Joe and Bouchard, P. John (2015). Determination and mitigation of the uncertainty of neutron diffraction measurements of residual strain in large-grained polycrystalline material. Journal of Applied Crystallography, 48(2) pp. 582–584.

• Download Published Version (PDF / 560kB)

Burca, G.; Kockelmann, W.; James, J. A. and Fitzpatrick, M. E. (2013). Modelling of an imaging beamline at the ISIS pulsed neutron source. Journal of Instrumentation, 8(10), article no. P10001.

• Download Accepted Manuscript (PDF / 2MB)

Muránsky, O.; Holden, T. M.; Kirstein, O.; James, J. A.; Paradowska, A. M. and Edwards, L. (2013). Evaluation of residual stresses in electron-beam welded Zr2.5Nb0.9Hf Zircadyne flange mock-up of a reflector vessel beam tube flange. Journal of Nuclear Materials, 438(1-3) pp. 154–162.

• Request a copy from the author This file is not available for public download

Haigh, R.D.; Hutchings, Michael; James, J. A.; Ganguly, S.; Mizuno, R.; Ogawa, K.; Okido, S.; Paradowska, A.M. and Fitzpatrick, M. E. (2013). Neutron diffraction residual stress measurements on girth-welded 304 stainless steel pipes with weld metal deposited up to half and full pipe wall thickness. International Journal of Pressure Vessels and Piping, 101 pp. 1–11.

• Download Accepted Manuscript (PDF / 3MB)

Paradowska, Anna M.; Tremsin, Anton; Kelleher, Joe F.; Zhang, Shu Yen; Paddea, Sanjooram; Burca, Genoveva; James, Jon A.; Ahmed, Rehan; Faisal, Nadimul H.; Grazzi, Francesco; Festa, Giulia; Andreani, Carla; Civita, Francesco; Bouchard, Peter J.; Kockelman, Winfried and Fitzpatrick, Michael E. (2012). Modern and historical engineering concerns investigated by neutron diffraction on ENGIN-X. Journal of Solid Mechanics and Materials Engineering, 6(6) pp. 408–418.

Pierret, S.; Evans, A.; Paradowska, A. M.; Kaestner, A.; James, J.; Etter, T. and Swygenhoven, H. Van (2012). Combining neutron diffraction and imaging for residual strain measurements in a single crystal turbine blade. NDT & E International, 45(1) pp. 39–45.

Boin, M.; Hilger, A.; Kardjilov, N.; Szang, S. Y.; Oliver, E. C.; James, J. A.; Randau, C. and Wimpory, R. C. (2011). Validation of Bragg edge experiments by Monte Carlo simulations for quantitative texture analysis. Journal of Applied Crystallography, 44(5) pp. 1040–1046.

Burca, G.; James, J. A.; Kockelmann, W.; Fitzpatrick, M. E.; Zhang, S.Y.; Hovind, J. and van Langh, R. (2011). A new bridge technique for neutron tomography and diffraction measurements. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 651(1) pp. 229–235.

van Langh, Robert; James, Jon James; Burca, Genoveva; Kockelmann, Winfried; Zhang, Shu Yan; Lehmann, Eberhard; Estermann, Mirko and Pappot, Arie (2011). New insights into alloy compositions: studying Renaissance bronze statuettes by combined neutron imaging and neutron diffraction techniques. Journal of Analytical Atomic Spectroscopy, 26(5) pp. 949–958.

Ganguly, S.; James, J. A.; Fitzpatrick, M. E. and Tanguy, A. (2010). Automation of a neutron diffractometer for analysis of residual stress inside complex engineering components. Applied Physics A: Materials Science & Processing, 99(3) pp. 601–606.

Hosseinzadh, Foroogh; Bouchard, P. John and James, Jonathan A. (2010). Measurements of Residual Stress in a Welded Compact Tension Specimen Using the Neutron Diffraction and Slitting Techniques. Materials Science Forum, 652 pp. 210–215.

Pratihar, S.; Ganguly, S.; James, J. A.; Fitzpatrick, M. E. and Edwards, L. (2007). Non-destructive determination of the 3D residual stress in a AA7050 upper wing skin-stringer panel using neutron diffraction. Journal of Neutron Research, 15(3-4) pp. 293–301.

James, Jonathan A. and Edwards, Lyndon (2007). Application of robot kinematics methods to the simulation and control of neutron beam line positioning systems. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 571(3) pp. 709–718.

Santisteban, J.R.; Daymond, M.R.; James, J.A. and Edwards, L. (2006). ENGIN-X: A third-generation neutron strain scanner. Journal of Applied Crystallography, 39(6) pp. 812–825.

Rist, M.A.; Tin, S.; Roder, B.A.; James, J.A. and Daymond, M.R. (2006). Residual stresses in a quenched superalloy turbine disc: measurements and modeling. Metallurgical and Materials Transactions A, 37(2) pp. 459–467.

Santisteban, J. R.; Fernandez, L.; Corsco, H.; Martinez, R. L.; Boccanera, L.; Edwards, L.; James, J. A. and Turski, M. (2006). Post-weld heat treatment stress relaxation in Zircaloy 4 plasma welds. Materials Science Forum, 524-525 pp. 491–496.

James, J.A.; Santisteban, J.R.; Edwards, L. and Daymond, M.R. (2004). A virtual laboratory for neutron and synchrotron strain scanning. Physica B: Condensed Matter, 350(1-3, Suppl) E743-E746.

Dann, J.A.; Daymond, M.R.; Edwards, L.; James, J. and Santisteban, J.R. (2004). A comparison between Engin and Engin-X, a new diffractometer optimized for stress measurement. Physica B: Condensed Matter, 350(1-3) pp. 511–514.

Endean, Mark; Goodyear, Alec; James, Jon; Kowal, Jan and Williams, Keith (2012). The philosophy and pedagogy of practical work for engineering undergraduates and the potential for online practical activities to enhance their experience - An exploratory workshop. In: EE 2012 - International Conference on Innovation, Practice and Research in Engineering Education, Conference Proceedings, Loughborough University, article no. 94845.

• Download Published Version (HTML / 54kB)

Kankanala, Anusha; James, Jon; Bouchard, John; Northover, Shirley and Yescas, Miguel (2011). Measurement of residual stresses in a dissimilar metal welded pipe. In: MECA SENS VI, 7-9 Sep 2011, Hamburg, Germany.

• Download Published Version (PDF / 1MB)

Turski, M.; Edwards, L.; James, J.; Bouchard, P. J.; Smith, M. C. and Withers, P. J. (2006). Residual stress measurement within a single pass groove weld specimen utilising neutron diffraction and the contour method. In: ASME 2006 Pressure Vessels and Piping Conference (PVP2006), 23-27 Jul 2006, Vancouver, BC, Canada, American Society of Mechanical Engineers, New York.

• Published Version (PDF) This file is not available for public download

Hasson, R.; James, J. A. and Swithenby, S. J. (2001). The Bayesian Power Imaging (BPI) test for task/control experiments. In: Biomag2000, Proc. 12th Int. Conf. on Biomagnetism, Aug 2000, Helsinki, Finland, Helsinki Univ. of Technology, Espoo, Finland, pp. 701–704.

• Download Accepted Manuscript (PDF / 9kB)