Currently browsing: Items authored or edited by Iestyn Jowers https://orcid.org/0000-0002-6656-9502

49 items in this list.
Generated on Sun Sep 15 22:07:12 2024 BST.

2024To Top

Jowers, Iestyn; Clarke, Daniel John and Moat, Richard J (2024). Square-based honeycombs: a study of shape and performance. In: Gero, John ed. Design Computing and Cognition’24. Springer.

Moat, Richard J; Clarke, Daniel John; Carter, Francesca; Rust, Dan and Jowers, Iestyn (2024). A class of aperiodic honeycombs with tuneable mechanical properties. Applied Materials Today, 37, article no. 102127.

Clarke, Daniel John; Moat, Richard and Jowers, Iestyn (2024). Identification of mechanically representative samples for aperiodic honeycombs. Materials Today Communications, 38, article no. 108505.

2023To Top

Clarke, Daniel John; Carter, Francesca; Jowers, Iestyn and Moat, Richard James (2023). An isotropic zero Poisson's ratio metamaterial based on the aperiodic ‘hat’ monotile. Applied Materials Today, 35, article no. 101959.

Clarke, Daniel John; Imediegwu, Chikwesiri; Moat, Richard and Jowers, Iestyn (2023). A systematic numerical and experimental study into the mechanical properties of five honeycombs. Composites Part B: Engineering, 264, article no. 110895.

Imediegwu, Chikwesiri; Clarke, Daniel; Carter, Francesca; Grimm, Uwe; Jowers, Iestyn and Moat, Richard (2023). Mechanical characterisation of novel aperiodic lattice structures. Materials & Design, 229, article no. 111922.

Imediegwu, Chikwesiri; Grimm, Uwe; Moat, Richard and Jowers, Iestyn (2023). A computational method for determining the linear elastic properties of 2D aperiodic lattice structures. The Journal of Strain Analysis for Engineering Design, 58(7) pp. 590–602.

Tahera, Khadija; Jowers, Iestyn; Loureiro-Koechlin, Cecilia; Eckert, Claudia and Lockett, Helen (2023). Industrial Perspectives on the Adoption of Virtual Testing. In: Proceedings of the Design Society, 3 pp. 2305–2314.

2022To Top

Moat, R. J.; Muyupa, E.; Imediegwu, C.; Clarke, D. J.; Jowers, I. and Grimm, U. G. (2022). Compressive behaviour of cellular structures with aperiodic order. Results in Materials, 15, article no. 100293.

Sobianin, Ihor; Psoma, Sotiria; Johnson, Jeffrey; Jowers, Iestyn and Tourlidakis, Antonios (2022). A hybrid piezoelectric and electrostatic energy harvester for scavenging arterial pulsations. In: 19th International Conference on Nanosciences & Nanotechnologie (NN22), 5-8 Jul 2022, Thessaloniki, Greece.

2019To Top

Jowers, Iestyn; Earl, Chris and Stiny, George (2019). Shapes, structures and shape grammar implementation. Computer-Aided Design, 111 pp. 80–92.

Harrison, Laura; Jowers, Iestyn and Earl, Christopher (2019). Defining Rules for Kinematic Shapes with Variable Spatial Relations. In: Computer-Aided Architectural Design. "Hello, Culture" (Lee, Ji-Hyun ed.), Communications in Computer and Information Science, Springer, Singapore, pp. 444–458.

Ferguson, Rebecca; Coughlan, Tim; Egelandsdal, Kjetil; Gaved, Mark; Herodotou, Christothea; Hillaire, Garron; Jones, Derek; Jowers, Iestyn; Kukulska-Hulme, Agnes; McAndrew, Patrick; Misiejuk, Kamila; Ness, Ingun Johanna; Rienties, Bart; Scanlon, Eileen; Sharples, Mike; Wasson, Barbara; Weller, Martin and Whitelock, Denise (2019). Innovating Pedagogy 2019: Open University Innovation Report 7. The Open University, Milton Keynes.

2018To Top

Jowers, Iestyn and Earl, Chris (2018). Visual Structures of Embedded Shapes. In: Lee, Ji-Hyun ed. Computational Studies on Cultural Variation and Heredity. KAIST Research Series. Springer, pp. 175–187.

2017To Top

Jowers, Iestyn; Gaved, Mark; Dallison, Delphine; Elliott-Cirigottis, Gary; Rochead, Alan and Craig, Mark (2017). A case study in online formal/informal learning: was it collaborative or cooperative learning? Design and Technology Education: an International Journal, 22(1)

Jowers, Iestyn and Earl, Christopher (2017). Structures in shapes: a perspective from rules and embedding. In: Cultural DNA Workshop 2017, 13 Jan 2017, KAIST Graduate School of Culture Technology.

Jowers, Iestyn; Earl, Chris and Stiny, George (2017). Shape computations without compositions. In: Çağdaş, G.; Özkar, M.; Gül, L. F. and Gürer, E. eds. Computer-Aided Architectural Design. Future Trajectories. 17th International Conference, CAAD Futures 2017, Istanbul, Turkey, July 12-14, 2017, Selected Papers. Springer, pp. 348–365.

Jowers, Iestyn and Earl, Christopher (2017). Incommensurable design descriptions. In: Creative Design and Advanced Manufacturing: An emerging application area for Signals and Systems, 2 Sep 2017, 2017 25th European Signal Processing Conference (EUSIPCO), Kos, Greece.

2016To Top

Gaved, Mark; Dallison, Delphine; Jowers, Iestyn; Elliott-Cirigottis, Gary; Craig, Mark and Rochead, Alan (2016). RE:FORM - Reimagining Education for the Future Of Redistributed Manufacturing. In: Papadimitriou, Irini; Prescott, Andrew and Rogers, Jon eds. Engineering the Future: as part of the V&A Digital Design Weekend 2016. United Kingdom: Uniform Communications Limited, pp. 49–53.

Jowers, Iestyn; Gaved, Mark; Elliott-Cirigottis, Gary; Dallison, Delphine; Rochead, Alan and Craig, Mark (2016). Communication is not collaboration: observations from a case study in collaborative learning. In: Proceedings of DRS 2016, Design Research Society 50th Anniversary Conference (Lloyd, Peter and Bohemia, Erik eds.), Brighton, UK, pp. 609–624.

Gaved, Mark; Jowers, Iestyn; Dallison, Delphine; Elliott-Cirigottis, Gary; Rochead, Alan and Craig, Mark (2016). Online distributed prototyping through a university-makerspace collaboration. In: FabLearn Europe 2016, 19-20 Jun 2016, Preston, Lancashire, UK.

MacLachlan, Lynne and Jowers, Iestyn (2016). Exploration of multi-material surfaces as weighted shapes. Graphical Models, 83 pp. 28–36.

2015To Top

Jowers, Iestyn and Earl, Christopher (2015). Extending the algebras of design. Nexus Network Journal, 17(3) pp. 947–962.

Earl, Christopher F. and Jowers, Iestyn (2015). Pinwheel patterns: from 2D to 3D schemas. Nexus Network Journal, 17(3) pp. 899–912.

Zapico, Miguel; Eckert, Claudia; Jowers, Iestyn and Earl, Christopher (2015). Towards product platform introduction: optimising commonality of components. In: Proceedings of the 20th International Conference on Engineering Design (ICED15).

Gürsoy, Benay; Jowers, Iestyn and Özkar, Mine (2015). Formal descriptions of material manipulations: an exploration with cuts and shadows. In: Celani, Gabriela; Sperling, David Moreno and Franco, Juarez Moara Santos eds. Computer-Aided Architectural Design Futures. The Next City - New Technologies and the Future of the Built Environment. Communications in Computer and Information Science (527). Springer, pp. 439–457.

2014To Top

Maclachlan, Lynne and Jowers, Iestyn (2014). Formalising flexible multi-material surfaces as weighted shapes. In: SIGGRAPH Asia 2014 Creative Shape Modeling and Design, ACM, article no. 3.

2013To Top

Jowers, Iestyn; Prats, Miquel; McKay, Alison and Garner, Steve (2013). Evaluating an eye tracking interface for a two-dimensional sketch editor. Computer-Aided Design, 45(5) pp. 923–936.

Metzler, Torsten; Jowers, Iestyn; Kain, Andreas and Lindemann, Udo (2013). Development of cognitive products via interpretation of system boundaries. In: Chakrabarti, Amaresh and Prakash, Raghu V. eds. ICoRD'13: Global Product Development. Lecture Notes in Mechanical Engineering. New Delhi: Springer India, pp. 163–174.

2012To Top

Gerlinghaus, Fabian; Pierce, Brennand; Metzler, Torsten; Jowers, Iestyn; Shea, Kristina and Cheng, Gordon (2012). Design and emotional expressiveness of Gertie (an open hardware robotic desk lamp). In: 2012 IEEE RO-MAN: The 21st IEEE International Symposium on Robot and Human Interactive Communication, 9-13 Sep 2012, Paris, France, pp. 1129–1134.

Jowers, Iestyn and Earl, Chris (2012). Shape interpretation with design computing. In: Fifth International Conference on Design Computing and Cognition (DDC'12): Bringing Artificial Intelligence, Cognitive Science and Computational Theories to Design Research, 7-9 Jun 2012, Bryan, TX, USA.

2011To Top

Jowers, Iestyn; Prats, Miquel; McKay, Alison and Garner, Steven (2011). Design exploration with useless rules and eye tracking. In: 18th International Conference on Engineering Design (ICED11), 15-18 Aug 2011, Copenhagen, Denmark.

Jowers, Iestyn and Earl, Christopher (2011). Implementation of curved shape grammars. Environment and Planning B: Planning and Design, 38(4) pp. 616–635.

Jowers, Iestyn; Prats, Miquel; Pedreira, Nieves; McKay, Alison and Garner, Steven (2011). Supporting shape reinterpretation with eye tracking. In: 'Circuit bending, breaking and mending', the 16th conference of Computer Aided Architectural Design Research in Asia (CAADRIA), 27-30 Apr 2011, Newcastle, Australia.

McKay, Alison; Jowers, Iestyn; Chau, Hau Hing; De Pennington, Alan and Hogg, David C. (2011). Computer-aided design synthesis: an application of shape grammars. International Journal of Product Development, 13(1) pp. 4–15.

2010To Top

McKay, Alison; Chase, Scott; Garner, Steven; Jowers, Iestyn; Prats, Miquel; Hogg, David; Chau, Hau Hing; de Pennington, Alan; Earl, Christopher and Lim, Sungwoo (2010). Design synthesis and shape generation. In: Inns, Tom ed. Designing for the 21st Century, Volume 2. Ashgate Publishing Ltd, pp. 304–321.

Prats, Miquel; Garner, Steve; Jowers, Iestyn; McKay, Alison and Pedreira, Nieves (2010). Interpretation of geometric shapes – an eye movement study. In: Proceedings of the 2010 Symposium on Eye-Tracking Research & Applications, ACM, pp. 243–250.

Jowers, Iestyn and Earl, Christopher (2010). The construction of curved shapes. Environment and Planning B: Planning and Design, 37(1) pp. 42–58.

Jowers, Iestyn; Hogg, David C.; McKay, Alison; Chau, Hau Hing and de Pennington, Alan (2010). Shape detection with vision: implementing shape grammars in conceptual design. Research in Engineering Design, 21(4) pp. 235–247.

Jowers, Iestyn; Prats, Miquel; Eissa, Hesham and Lee, Ji-Hyun (2010). A study of emergence in the generation of Islamic geometric patterns’. In: Dave, B.; Li, A. I.; Gu, N. and Park, H.-J. eds. New Frontiers: Proceedings of the 15th International Conference on Computer-Aided Architectural Design Research in Asia CAADRIA 2010. Hong Kong: CAADRIA, pp. 39–48.

2009To Top

Prats, Miquel; Lim, Sungwoo; Jowers, Iestyn; Garner, Steve W. and Chase, Scott (2009). Transforming shape in design: observations from studies of sketching. Design Studies, 30(5) pp. 503–520.

2008To Top

Jowers, I.; Prats, M.; Lim, S.; Mckay, A.; Garner, S. and Chase, S. (2008). Supporting reinterpretation in computer-aided conceptual design. In: Fifth Eurographics Workshop on Sketch-Based Interfaces and Modeling, 11-13 Jun 2008, Annecy, France, pp. 151–158.

Prats, Miquel; Lim, Sungwoo and Jowers, Iestyn (2008). Describing shape transformations in design sketches. In: Design Computing and Cognition DCC’08 workshop on Informing computational support for conceptual design: lessons learned from sketching studies, 21 Jun 2008, Georgia Institute of Technology, Atlanta, GA, pp. 5–8.

Lim, Sungwoo; Prats, Miquel; Jowers, Iestyn; Chase, Scott; Garner, Steven and McKay, Alison (2008). Shape exploration in design: formalising and supporting a transformational process. International Journal of Architectural Computing (IJAC), 6(4) pp. 415–433.

McKay, Alison; Jowers, Iestyn; Chau, Hau Hing; De Pennington, Alan and Hogg, David C. (2008). Computer aided design: an early shape synthesis system. In: Yan, Xiu-Tian; Eynard, Benoit and Ion, William J. eds. Global Design to Gain a Competitive Edge: An Holistic and Collaborative Design Approach based on Computational Tools. London: Springer, pp. 3–12.

2007To Top

Jowers, Iestyn (2007). Computation with Curved Shapes: Towards Freeform Shape Generation in Design. PhD thesis The Open University.

Eckert, C. M.; Jowers, I. and Clarkson, P. J. (2007). Knowledge requirements over long product lifecycles. In: Proceedings of the 16th International Conference on Engineering Design (ICED'07), 28-31 Aug 2007, Paris, France.

2006To Top

Prats, M.; Earl, C.; Garner, S. and Jowers, Iestyn (2006). Shape exploration of designs in a style: toward generation of product designs. Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 20(3) pp. 201–215.

2004To Top

Jowers, Iestyn; Prats, Miquel; Earl, Christopher and Garner, Steven (2004). On curves and computation with shapes. In: Generative CAD Systems (Akin, Omer; Krishnamurti, Ramesh and Lam, Khee Poh eds.), Carnegie Mellon University, Pittsburgh, Pennsylvania, pp. 439–457.

Export

Subscribe to these results

get details to embed this page in another page Embed as feed [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0