Currently browsing: Items authored or edited by Amir Shirzadi https://orcid.org/0000-0002-2897-139X

38 items in this list.
Generated on Fri Aug 12 12:39:59 2022 BST.

Edited BookTo Top

Journal ItemTo Top

Dey, Avishek; Chandrabose, Gauthaman; Damptey, Lois A.O.; Erakulan, E.S.; Thapa, Ranjit; Zhuk, Siarhei; Dalapati, Goutam Kumar; Ramakrishna, Seeram; Braithwaite, Nicholas St. J.; Shirzadi, Amir and Krishnamurthy, Satheesh (2021). Cu2O/CuO heterojunction catalysts through atmospheric pressure plasma induced defect passivation. Applied Surface Science, 541, article no. 148571.

Zhang, Chengcong; Cao, Juyong and Shirzadi, Amir A. (2021). Refill Friction Stir Spot Welding (Refill FSSW) of magnesium lithium alloys: effects of air and argon cooling. Science and Technology of Welding and Joining, 26(3) pp. 236–243.

Prikhodko, Sergey V.; Savvakin, Dmytro G.; Markovsky, Pavlo E.; Stasuk, Olexander O.; Penney, James; Shirzadi, Amir A.; Davies, Peter D. and Davies, Helen M. (2020). Diffusion bonding of TiC or TiB reinforced Ti–6Al–4V matrix composites to conventional Ti–6Al–4V alloy. Science and Technology of Welding and Joining, 25(6) pp. 518–524.

Prikhodko, SV; Savvakin, DG; Markovsky, PE; Stasiuk, OO; Enzinger, N; Deley, F; Flipo, B; Shirzadi, AA; Davies, HM; Davies, PD; Penny, J; Bozhilov, K and Ivasishin, OM (2019). Layered Structures of Ti-6Al-4V Alloy and Metal Matrix Composites on Its Base Joint by Diffusion Bonding and Friction Welding. Microscopy and Microanalysis, 25(S2) pp. 812–813.

Terasaki, Nobuyuki; Ohashi, Touyou; Nagatomo, Yoshiyuki; Kuromitsu, Yoshirou and Shirzadi, Amir A. (2019). A new method for liquid-phase bonding of copper plates to aluminum nitride (AlN) substrates used in high-power modules. Journal of Materials Science: Materials in Electronics, 30(7) pp. 6552–6555.

Li, Shichun; Limbach, René; Longley, Louis; Shirzadi, Amir A.; Walmsley, John C.; Johnstone, Duncan N.; Midgley, Paul A.; Wondraczek, Lothar and Bennett, Thomas D. (2019). Mechanical Properties and Processing Techniques of Bulk Metal–Organic Framework Glasses. Journal of the American Chemical Society, 141(2) pp. 1027–1034.

Shirzadi, Amir A.; Laik, Arijit; Tewari, Raghvendra; Orsborn, Jonathan and Dey, Gautam K. (2018). Gallium-assisted diffusion bonding of stainless steel to titanium; microstructural evolution and bond strength. Materialia, 4 pp. 115–126.

Moat, R. J.; Ooi, S.; Shirzadi, A. A.; Dai, H.; Mark, A. F.; Bhadeshia, H. K. D. H. and Withers, P. J. (2018). Residual stress control of multipass welds using low transformation temperature fillers. Materials Science and Technology, 34(5) pp. 519–528.

Ruan, L. H.; Wu, K. M.; Qiu, J. A.; Shirzadi, A. A. and Rodionova, I. G. (2017). Effect of Silicon Content on Carbide Precipitation and Low-Temperature Toughness of Pressure Vessel Steels. Metal Science and Heat Treatment, 59(1-2) pp. 97–101.

Hu, F.; Wu, K. M.; Wan, X. L.; Rodionova, I.; Shirzadi, A. A. and Zhang, F. C. (2017). Novel method for refinement of retained austenite in micro/nano-structured bainitic steels. Materials Science and Technology, 33(11) pp. 1360–1365.

Huang, G.; Wan, X. L.; Wu, K. M.; Isayev, O.; Hress, O.; Rodionova, I. and Shirzadi, A. A. (2016). Effect of Cu addition on microstructure and impact toughness in the simulated coarse-grained heat-affected zone of high-strength low-alloy steels. Materials Science and Technology, 33(5) pp. 602–614.

Li, Y.; Wan, X. L.; Lu, W. Y.; Shirzadi, A. A.; Isayev, O.; Hress, O. and Wu, K. M. (2016). Effect of Zr-Ti combined deoxidation on the microstructure and mechanical properties of high-strength low-alloy steels. Materials Science and Engineering: A, 659 pp. 179–187.

Laik, A.; Shirzadi, A. A.; Sharma, G.; Tewari, R.; Jayakumar, T. and Dey, G. K. (2015). Microstructure and Interfacial Reactions During Vacuum Brazing of Stainless Steel to Titanium Using Ag-28 pct Cu Alloy. Metallurgical and Materials Transactions A, 46(2) pp. 771–782.

Lei, X. W.; Wang, H. H.; Wu, K. M.; Shirzadi, A. A.; Yin, Y. Q. and Wu, N. C. (2014). In situ observation of bainite to austenite transformation of microalloyed high strength steel during simulated welding cycle. Science and Technology of Welding and Joining, 19(5) pp. 402–407.

Hu, Feng; Wu, Kaiming; Hodgson, Peter Damian and Shirzadi, Amir Abbas (2014). Refinement of retained austenite in super-bainitic steel by a deep cryogenic treatment. ISIJ International, 54(1) pp. 222–226.

Hu, Feng; Wu, Kaiming; Hou, Tingping and Shirzadi, Amir A. (2013). Tempering stability of retained austenite in nanostructured dual-phase steels. Materials Science and Technology, 29(8) pp. 947–953.

Laik, A.; Shirzadi, A. A.; Tewari, R. and Kumar, Anish (2013). Microstructure and interfacial reactions during active metal brazing of stainless steel to titanium. Metallurgical and Materials Transactions A, 44(5) pp. 2212–2225.

Lelito, J.; Zak, P. L.; Greer, A. L.; Suchy, J. S.; Krajewski, W. K.; Gracz, B.; Szucki, M. and Shirzadi, A. A. (2012). Crystallization model of magnesium primary phase in the AZ91/SiC composite. Composites Part B: Engineering, 43(8) pp. 3306–3309.

Lelito, Janusz; Zak, Pawel L.; Shirzadi, Amir A.; Greer, A. Lindsay; Krajewski, Witold K.; Suchy, Jozef S.; Haberl, Katharina and Schumacher, Peter (2012). Effect of SiC reinforcement particles on the grain density in a magnesium-based metal-matrix composite: modelling and experiment. Acta Materialia, 60(6-7) pp. 2950–2958.

Shirzadi, A. A.; Abreu, H.; Cayron, C. and Ubhi, S. (2011). Combined effect of stress and strain on crystallographic orientation of bainite. Ironmaking & Steelmaking, 38(7) pp. 519–524.

Moat, R. J.; Stone, H. J.; Shirzadi, A. A.; Francis, J. A.; Kundu, S.; Mark, A. F.; Bhadeshia, H. K. D. H.; Karlsson, L. and Withers, P. J. (2011). Design of weld fillers for mitigation of residual stresses in ferritic and austenitic steel welds. Science and Technology of Welding & Joining, 16(3) pp. 279–284.

Shirzadi, A. A. and Bhadeshia, H. K. D. H. (2010). Accumulation of stress in constrained assemblies: novel Satoh test configuration. Science and Technology of Welding & Joining, 15(6) pp. 497–499.

Shirzadi, A. A.; Bhadeshia, H. K. D. H.; Karlsson, L. and Withers, P. J. (2009). Stainless steel weld metal designed to mitigate residual stresses. Science and Technology of Welding & Joining, 14(6) pp. 559–565.

Shirzadi, A. A.; Abreu, H.; Pocock, L.; Klobčar, D.; Withers, P. J. and Bhadeshia, H. K. D. H. (2009). Bainite orientation in plastically deformed austenite. International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde), 100(1) pp. 40–45.

Shirzadi, A. A.; Zhu, Y. and Bhadeshia, H. K. D. H. (2008). Joining ceramics to metals using metallic foam. Materials Science and Engineering: A, 496(1-2) pp. 501–506.

Conference or Workshop ItemTo Top

Ooi, Steve; Shirzadi, Amir and Yang, Jianguo (2015). Austenite memory and variant selection in a novel martensitic welding alloy. In: Materials Today: Proceedings, Elsevier Ltd., 2(Suppl. 2) S325-S331.

Peet, M.J. and Shirzadi, Amir (2010). Neural network modelling of hot deformation of austenite. In: 6th International Conference on Physical and Numerical Simulation of Materials Processing, 16-19 Nov 2010, Guilin, China.

Karlsson, L.; Mráz, L.; Bhadeshia, H. K. D. H and Shirzadi, A. A. (2010). Comparison of alloying concepts for Low Transformation Temperature (LTT) welding consumables. In: Advanced Welding Technologies, 19-21 Oct 2010, Sosnowiec, Poland.

Dai, H.; Mark, A. F.; Moat, R.; Shirzadi, A. A.; Bhadeshia, H. K. D. H.; Karlsson, L. and Withers, P. J. (2010). Modelling of residual stress minimization through martensitic transformation in stainless steel welds. In: 9th International Seminar on ‘Numerical analysis of weldability’, 28-30 Sep 2009, Graz, Austria,.

Export

Subscribe to these results

get details to embed this page in another page Embed as feed [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0