Currently browsing: Items authored or edited by Amir Shirzadi https://orcid.org/0000-0002-2897-139X

37 items in this list.
Generated on Tue Sep 28 13:33:12 2021 BST.

Jump to:

D | H | K | L | M | O | P | R | S | T | Z

DTo Top

Dai, H.; Mark, A. F.; Moat, R.; Shirzadi, A. A.; Bhadeshia, H. K. D. H.; Karlsson, L. and Withers, P. J. (2010). Modelling of residual stress minimization through martensitic transformation in stainless steel welds. In: 9th International Seminar on ‘Numerical analysis of weldability’, 28-30 Sep 2009, Graz, Austria,.

HTo Top

Hu, F.; Wu, K. M.; Wan, X. L.; Rodionova, I.; Shirzadi, A. A. and Zhang, F. C. (2017). Novel method for refinement of retained austenite in micro/nano-structured bainitic steels. Materials Science and Technology, 33(11) pp. 1360–1365.

Huang, G.; Wan, X. L.; Wu, K. M.; Isayev, O.; Hress, O.; Rodionova, I. and Shirzadi, A. A. (2016). Effect of Cu addition on microstructure and impact toughness in the simulated coarse-grained heat-affected zone of high-strength low-alloy steels. Materials Science and Technology, 33(5) pp. 602–614.

Hu, Feng; Wu, Kaiming; Hodgson, Peter Damian and Shirzadi, Amir Abbas (2014). Refinement of retained austenite in super-bainitic steel by a deep cryogenic treatment. ISIJ International, 54(1) pp. 222–226.

Hu, Feng; Wu, Kaiming; Hou, Tingping and Shirzadi, Amir A. (2013). Tempering stability of retained austenite in nanostructured dual-phase steels. Materials Science and Technology, 29(8) pp. 947–953.

KTo Top

LTo Top

Li, Shichun; Limbach, René; Longley, Louis; Shirzadi, Amir A.; Walmsley, John C.; Johnstone, Duncan N.; Midgley, Paul A.; Wondraczek, Lothar and Bennett, Thomas D. (2019). Mechanical Properties and Processing Techniques of Bulk Metal–Organic Framework Glasses. Journal of the American Chemical Society, 141(2) pp. 1027–1034.

Laik, A.; Shirzadi, A. A.; Sharma, G.; Tewari, R.; Jayakumar, T. and Dey, G. K. (2015). Microstructure and Interfacial Reactions During Vacuum Brazing of Stainless Steel to Titanium Using Ag-28 pct Cu Alloy. Metallurgical and Materials Transactions A, 46(2) pp. 771–782.

Lei, X. W.; Wang, H. H.; Wu, K. M.; Shirzadi, A. A.; Yin, Y. Q. and Wu, N. C. (2014). In situ observation of bainite to austenite transformation of microalloyed high strength steel during simulated welding cycle. Science and Technology of Welding and Joining, 19(5) pp. 402–407.

Laik, A.; Shirzadi, A. A.; Tewari, R. and Kumar, Anish (2013). Microstructure and interfacial reactions during active metal brazing of stainless steel to titanium. Metallurgical and Materials Transactions A, 44(5) pp. 2212–2225.

Lelito, Janusz; Zak, Pawel L.; Shirzadi, Amir A.; Greer, A. Lindsay; Krajewski, Witold K.; Suchy, Jozef S.; Haberl, Katharina and Schumacher, Peter (2012). Effect of SiC reinforcement particles on the grain density in a magnesium-based metal-matrix composite: modelling and experiment. Acta Materialia, 60(6-7) pp. 2950–2958.

Lelito, J.; Zak, P. L.; Greer, A. L.; Suchy, J. S.; Krajewski, W. K.; Gracz, B.; Szucki, M. and Shirzadi, A. A. (2012). Crystallization model of magnesium primary phase in the AZ91/SiC composite. Composites Part B: Engineering, 43(8) pp. 3306–3309.

MTo Top

Moat, R. J.; Ooi, S.; Shirzadi, A. A.; Dai, H.; Mark, A. F.; Bhadeshia, H. K. D. H. and Withers, P. J. (2018). Residual stress control of multipass welds using low transformation temperature fillers. Materials Science and Technology, 34(5) pp. 519–528.

Moat, R. J.; Stone, H. J.; Shirzadi, A. A.; Francis, J. A.; Kundu, S.; Mark, A. F.; Bhadeshia, H. K. D. H.; Karlsson, L. and Withers, P. J. (2011). Design of weld fillers for mitigation of residual stresses in ferritic and austenitic steel welds. Science and Technology of Welding & Joining, 16(3) pp. 279–284.

OTo Top

Ooi, Steve; Shirzadi, Amir and Yang, Jianguo (2015). Austenite memory and variant selection in a novel martensitic welding alloy. In: Materials Today: Proceedings, Elsevier Ltd., 2(Suppl. 2) S325-S331.

PTo Top

Prikhodko, Sergey V.; Savvakin, Dmytro G.; Markovsky, Pavlo E.; Stasuk, Olexander O.; Penney, James; Shirzadi, Amir A.; Davies, Peter D. and Davies, Helen M. (2020). Diffusion bonding of TiC or TiB reinforced Ti–6Al–4V matrix composites to conventional Ti–6Al–4V alloy. Science and Technology of Welding and Joining (Early access).

Prikhodko, SV; Savvakin, DG; Markovsky, PE; Stasiuk, OO; Enzinger, N; Deley, F; Flipo, B; Shirzadi, AA; Davies, HM; Davies, PD; Penny, J; Bozhilov, K and Ivasishin, OM (2019). Layered Structures of Ti-6Al-4V Alloy and Metal Matrix Composites on Its Base Joint by Diffusion Bonding and Friction Welding. Microscopy and Microanalysis, 25(S2) pp. 812–813.

Peet, M.J. and Shirzadi, Amir (2010). Neural network modelling of hot deformation of austenite. In: 6th International Conference on Physical and Numerical Simulation of Materials Processing, 16-19 Nov 2010, Guilin, China.

RTo Top

Ruan, L. H.; Wu, K. M.; Qiu, J. A.; Shirzadi, A. A. and Rodionova, I. G. (2017). Effect of Silicon Content on Carbide Precipitation and Low-Temperature Toughness of Pressure Vessel Steels. Metal Science and Heat Treatment, 59(1-2) pp. 97–101.

STo Top

Shirzadi, Amir A.; Laik, Arijit; Tewari, Raghvendra; Orsborn, Jonathan and Dey, Gautam K. (2018). Gallium-assisted diffusion bonding of stainless steel to titanium; microstructural evolution and bond strength. Materialia, 4 pp. 115–126.

Shirzadi, A. A.; Abreu, H.; Cayron, C. and Ubhi, S. (2011). Combined effect of stress and strain on crystallographic orientation of bainite. Ironmaking & Steelmaking, 38(7) pp. 519–524.

Shirzadi, A. A. and Bhadeshia, H. K. D. H. (2010). Accumulation of stress in constrained assemblies: novel Satoh test configuration. Science and Technology of Welding & Joining, 15(6) pp. 497–499.

Shirzadi, A. A.; Bhadeshia, H. K. D. H.; Karlsson, L. and Withers, P. J. (2009). Stainless steel weld metal designed to mitigate residual stresses. Science and Technology of Welding & Joining, 14(6) pp. 559–565.

Shirzadi, A. A.; Abreu, H.; Pocock, L.; Klobčar, D.; Withers, P. J. and Bhadeshia, H. K. D. H. (2009). Bainite orientation in plastically deformed austenite. International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde), 100(1) pp. 40–45.

Shirzadi, A. A.; Zhu, Y. and Bhadeshia, H. K. D. H. (2008). Joining ceramics to metals using metallic foam. Materials Science and Engineering: A, 496(1-2) pp. 501–506.

TTo Top

Terasaki, Nobuyuki; Ohashi, Touyou; Nagatomo, Yoshiyuki; Kuromitsu, Yoshirou and Shirzadi, Amir A. (2019). A new method for liquid-phase bonding of copper plates to aluminum nitride (AlN) substrates used in high-power modules. Journal of Materials Science: Materials in Electronics, 30(7) pp. 6552–6555.

ZTo Top

Export

Subscribe to these results

get details to embed this page in another page Embed as feed [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0