Currently browsing: Items authored or edited by Alex Forsey https://orcid.org/0000-0001-9017-5194

Abburi Venkata, K.; Khayatzadeh, S.; Achouri, A.; de Oliveira, J. Araujo; Forsey, A. N.; Gungor, S.; Bouchard, P. J. and Truman, C. E. (2018). Examining Stress Relaxation in a Dissimilar Metal Weld Subjected to Postweld Heat Treatment. Materials Performance and Characterization, 7(4) pp. 675–692.

• Download Accepted Manuscript (PDF / 1MB)

Das, Yadunandan; Fernandez-Caballero, Antonio; Elmukashfi, Elsiddig; Jazaeri, Hedieh; Forsey, Alex; Hutchings, Michael T.; Schweins, Ralf and Bouchard, P. John (2022). Stress driven creep deformation and cavitation damage in pure copper. Materials Science and Engineering: A, 833, article no. 142543.

Das, Yadunandan B.; Forsey, Alexander N.; Kelleher, Joe; Kabra, Saurabh; Fitzpatrick, Michael E.; Simm, Thomas H.; Gungor, Salih and Moat, Richard J. (2018). The influence of temperature on deformation-induced martensitic transformation in 301 stainless steel. Materials Science and Technology, 34(17) pp. 2114–2125.

• Download Accepted Manuscript (PDF / 1MB)

Das, Yadunandan B.; Forsey, Alexander N.; Simm, Thomas H.; Perkins, Karen M.; Fitzpatrick, Michael E.; Gungor, Salih and Moat, Richard J. (2016). In situ observation of strain and phase transformation in plastically deformed 301 austenitic stainless steel. Materials & Design, 112 pp. 107–116.

• Download Accepted Manuscript (PDF / 2MB)

Forsey, Alex; Das, Yadunandan; Simm, Thomas H.; Clark, Dan; Boswell, John; Gungor, Salih and Moat, Richard (2018). Mechanical Property Heterogeneity in Additively Manufactured Nickel Superalloy. Materials Science and Engineering A, 712 pp. 681–684.

• Download Accepted Manuscript (PDF / 4MB)

Forsey, A. and Gungor, S. (2016). Demosaicing images from colour cameras for digital image correlation. Optics and lasers in engineering, 86 pp. 20–28.

• Download Accepted Manuscript (PDF / 3MB)

Francis, J. A.; Moat, R. J.; Abdolvand, H. and Forsey, A. (2014). An assessment of the mechanisms of transformation plasticity in SA508 Grade 3 steel during simulated welding thermal cycles. In: Materials Science Forum, 777 pp. 188–193.

Javadi, Y.; Smith, M.C.; Abburi Venkata, K.; Naveed, N.; Forsey, A.N.; Francis, J.A.; Ainsworth, R.A.; Truman, C.E.; Smith, D.J.; Hosseinzadeh, F.; Gungor, S.; Bouchard, P. J.; Dey, H.C.; Bhaduri, A.K. and Mahadevan, S. (2017). Residual stress measurement round robin on an electron beam welded joint between austenitic stainless steel 316L(N) and ferritic steel P91. International Journal of Pressure Vessels and Piping, 154 pp. 41–57.

• Download Published Version (PDF / 6MB)

Mark, A. F.; Moat, R.; Forsey, A.; Abdolvand, H. and Withers, P. J. (2014). A new method for quantifying anisotropic martensitic transformation strains accumulated during constrained cooling. Materials Science and Engineering: A, 611 pp. 354–361.

• Download Published Version (PDF / 1MB)

Rooyen, Melody; Forsey, Alexander N.; Gungor, Salih and Becker, Thorsten H. (2022). Creep deformation measurement of ex‐service 12% Cr steel over nonuniform stress fields using digital image correlation. Strain, 58(1), article no. e12400.

Simm, T. H.; Das, Y. B.; Forsey, A. N.; Gungor, S.; Fitzpatrick, M. E.; Prakash, D. G. L.; Moat, R. J.; Birosca, S.; da Fonseca, J. Quinta and Perkins, K. M. (2020). The τ-plot, a multicomponent 1-D pole figure plot, to quantify the heterogeneity of plastic deformation. Materials Characterization, 160, article no. 110114.

• Download Accepted Manuscript (PDF / 4MB)

Sakanashi, Y.; Gungor, S.; Forsey, A. N. and Bouchard, P. J. (2017). Measurement of Creep Deformation across Welds in 316H Stainless Steel Using Digital Image Correlation. Experimental Mechanics, 57(2) pp. 231–244.

• Download Published Version (PDF / 3MB)

Tan, Chaolin; Zou, Ji; Li, Sheng; Jamshidi, Parastoo; Abena, Alessandro; Forsey, Alex; Moat, Richard J.; Essa, Khamis; Wang, Minshi; Zhou, Kesong and Attallah, Moataz M. (2021). Additive manufacturing of bio-inspired multi-scale hierarchically strengthened lattice structures. International Journal of Machine Tools and Manufacture, 167, article no. 103764.

• Download Accepted Manuscript (PDF / 6MB)