Currently browsing: Engineering and Innovation

Number of items at this level: 3762.
Generated on Thu Oct 10 23:48:53 2024 BST.

BookTo Top

Allbury, K; Abbe, O and Anderson, Jane (2013). Environmental impact of metals (FB 57). BRE Electronic Publications.

Allbury, K.; Franklin, E. and Anderson, J. (2013). Environmental impact of brick, stone and concrete. Watford: BRE Press.

Allbury, Kim and Anderson, Jane (2011). Environmental impact of insulation. BRE Electronic Publications, p. 20.

Anderson, J.; Clift, M.; Bourke, K. and Lockie, S. (2009). Performance and service life in the Environmental Profiles Methodology and Green Guide to Specification. Watford: BRE Press.

Anderson, J.; Edwards, S.; Mundy, J. and Bonfield, P. (2002). Life cycle impacts of timber: A review of the environmental impacts of wood products in construction. Watford: BRE Press.

Anderson, Jane and Howard, Nigel (2000). The Green Guide to Housing Specification. Watford: BRE.

Anderson, Jane; Jansz, Antonia; Steele, Kristian; Thistlethwaite, Paul; Bishop, Gordon and Black, Adam (2004). Green Guide to Composites: an environmental profiling system for composite materials and products. Watford: BRE Press.

Anderson, Jane and Mills, Kate (2002). Refurbishment or redevelopment of office buildings? Sustainability comparisons and Sustainability case histories. Watford: BRE Press.

Anderson, Jane; Shiers, David and Sinclair, Mike (2002). The Green Guide to Specification: An Environmental Profiling System for Building Materials and Components (Third Edition). Oxford: Blackwell.

Anderson, Jane; Shiers, David and Steele, Kristian (2009). The Green Guide to Specification (Fourth Edition). Oxford: Wiley Blackwell, p. 236.

Barratt, Rod (2001). Atmospheric dispersion modelling: an introduction to practical applications. Business and the Environment: Practitioner Series. London, UK: Earthscan.

Bell, Simon (1996). Learning with Information Systems: Learning cycles and information systems development. London: Routledge.

Bell, Simon (2017). The Formations of Terror. London: Cambridge Scholars.

Bell, Simon; Berg, Tessa and Morse, Stephen (2016). Rich Pictures: Encouraging Resilient Communities. Earthscan Tools for Community Planning. London: Routledge.

Bell, Simon; Collins, Kevin and Cutting, Charles (2019). M-World, S-World: Achieving wisdom in online groups. Milton Keynes: Open University.

Bell, Simon and Coudert, Elisabeth (2005). A practitioner's guide to 'Imagine', the systemic and prospective sustainability analysis. Blue Plan Papers (3). Valbonne, France: UNEP.

Bell, Simon and Cutting, Charles (2017). Project Fear. Open University: Open Learn, Open University.

Bell, Simon and Morse, Stephen (2003). Measuring sustainability: learning by doing. London, UK: Earthscan.

Bell, Simon and Morse, Stephen (2008). Sustainability Indicators: Measuring the immeasurable (2nd ed). London: Earthscan.

Bell, Simon and Morse, Stephen (2012). Resilient Participation: Saving the Human Project. London: Earthscan.

Bell, Simon and Wood-Harper, Trevor (2003). How to set up and run information systems: a non-specialist's guide. 2nd edition. London, UK: Earthscan.

Bignell, Victor and Fortune, Joyce (1984). Understanding Systems Failures. Manchester: Manchester University Press.

Campoli, Alessandra (2011). Mae Nak: Donne Vampiro e Spiriti Irati dal Lontano Oriente. Rome: Exorma.

Campoli, Alessandra (2008). Ritual Art of the Kingdom of Mithila: Traditional Paintings by Janakpur Women in Nepal. Vajra Publications.

Campoli, Alessandra (2006). La Montagna Divina: Iconografia e Mito. Vajra Publications.

Cornforth, Chris; Thomas, Alan; Spear, Roger and Lewis, Jenny (1988). Developing Successful Worker Co-operatives. London: Sage Publications Ltd.

Cross, Nigel (2021). Engineering Design Methods: Strategies for Product Design (5th ed.). Chichester: John Wiley & Sons.

Cross, Nigel (2011). Design Thinking: Understanding How Designers Think and Work. Oxford: Berg Publishers.

Cross, Nigel (2006). Designerly Ways of Knowing. London: Springer-Verlag.

de Braganca, A.; Munslow, B.; Wield, D. and Wuyts, M. (1979). Zimbabwe - A questão rodesiana (Zimbabwe - The Rhodesian Question). Maputo: Instituto Nacional do Livro e do Disco.

Doran, Dan and Anderson, Jane (2011). Carbon footprinting and labelling of construction products. BRE Electronic Publications.

Doran, Dan and Anderson, Jane (2011). Environmental impact of vertical cladding. BRE Electronic Publications, p. 16.

Dutfield, Andrew; Mundy, Joanne and Anderson, Jane (2011). Environmental impact of floor finishes: Incorporating the The Green Guide ratings for floor finishes. BRE Electronic Publications, p. 56.

Elliott, David (2022). Nuclear Power (Second Edition). IOP Publishing.

Elliott, David (2003). A Solar World: Climate Change and the Green Energy Revolution. Schumacher Briefing, 10. Totnes, UK: Green Books.

Elliott, David (2013). Renewables: A Review of Sustainable Energy Supply Options. Bristol: IOP Publishing.

Elliott, David (2012). Fukushima: Impacts and Implications. Pivot. Houndmills: Palgrave Macmillan.

Elliott, David (2019). Renewable energy in the UK: past, present and future. Energy Climate and Enviroment. Palgrave.

Elliott, David and Cook, Terence (2018). Renewable Energy: from Europe to Africa. Pivot. Palgrave.

Enoch, Marcus; Nijkamp, Peter; Potter, Stephen and Ubbels, Barry (2004). Unfare solutions: local earmarked charges to fund public transport. Transport, Development & Sustainability. UK: Spon Press.

Fortune, Joyce and Peters, Geoff (2005). Information systems: achieving success by avoiding failure. Chichester, UK: Wiley.

Fortune, Joyce and Peters, Geoffrey (1995). Learning from failure - The systems approach. Chichester, UK: Wiley.

Gantner, Johannes; Wittstock, Bastian; Lenz, Katrin; Fischer, Matthias; Sedlbauer, Klaus; Anderson, Jane; Saunders, Tom; Gyetvai, Zsoka; Carter, Claire; Braune, Anna; Kreißig, Johannes; Bosdevigie, Boris; Lasvaux, Sébastien; Schiopu, Nicoleta; Bazzana, Manuel; Jayr, Emmanuel; Nibel, Sylviane; Hans, Julien; Chevalier, Jacques; Gazulla, Cristina; Fullana-i-Palmer, Pere; Barrow-Williams, Tim; Mundy, Jo-Anne and Sjöström, Christer (2015). EeBGuide Guidance Document Part B: Buildings. Operational guidance for life cycle assessment studies of the Energy Efficient Building Initiative. Stuttgart: Fraunhofer Verlag.

Gantner, Johannes; Wittstock, Bastian; Lenz, Katrin; Fischer, Matthias; Sedlbauer, Klaus; Anderson, Jane; Saunders, Tom; Gyetvai, Zsoka; Carter, Claire; Braune, Anna; Kreißig, Johannes; Bosdevigie, Boris; Lasvaux, Sébastien; Schiopu, Nicoleta; Bazzana, Manuel; Jayr, Emmanuel; Nibel, Sylviane; Hans, Julien; Chevalier, Jacques; Gazulla, Cristina; Fullana-i-Palmer, Pere; Barrow-Williams, Tim; Mundy, Jo-Anne and Sjöström, Christer (2015). EeBGuide Guidance Document Part A: Products. Operational guidance for Life Cycle Assessment studies of the Energy Efficient Building Initiative. Stuttgart: Fraunhofer Verlag, p. 332.

Gehl Sampath, Padmashree (2005). Regulating Bioprospecting: Institutions for Drug Research, Access and Benefit-Sharing. Tokyo, Japan: United Nations University Press.

Hatem, Faten (2022). Moments of Contemplation: Art, Science and Architecture. Amazon.

Horrocks, Ivan (2008). Change and Reality: Exploring the Structure-Culture-Agency Dynamic. Saarbrucken, Germany: VDM Verlag.

Howard, Nigel; Edwards, Suzy and Anderson, Jane (1999). BRE methodology for environmental profiles of construction materials, components and buildings. Watford: BRE Press.

Ison, Raymond and Straw, Ed (2020). The Hidden Power of Systems Thinking: Governance in a Climate Emergency. Systems Thinking. Routledge.

Ison, Stephen; Peake, Stephen and Wall, Stuart (2002). Environmental issues and policies. Harlow, UK: Pearson Education Limited.

Johnson, Jeffrey (2013). Hypernetworks in the science of complex systems. Series on complexity science, 3. London: Imperial College Press.

Johnson, K.; Lowres, F.; Wells, N.; Anderson, J.; Keane, B.; Hardy, G. and Costa, S. (2011). LIST (Low Impact Shopfitting Tool) for designing greener shopfitting display equipment. Watford: BRE Press.

Kaplinsky, Raphael and Farooki, Masuma (2011). How China Disrupted Global Commodities: The Reshaping of the World’s Resource Sector. Routledge studies in global competition. London: Routledge.

Kaplinsky, Raphael; Farooki, Masuma; Alcorta, Ludovico and Rodousakis, Niki (2012). Promoting Industrial Diversification in Resource Intensive Economies: The Experiences of Sub-Saharan Africa and Central Asia Regions. Vienna: United Nations Industrial Development Organisation.

Kear, Karen; Rosewell, Jon; Williams, Keith; Ossiannilsson, Ebba; Rodrigo, Covadonga; Sánchez-Elvira Paniagua, Ángeles; Santamaría Lancho, Miguel; Vyt, André and Mellar, Harvey (2016). Quality Assessment for E-learning: a Benchmarking Approach (Third edition). Maastricht: European Association of Distance Teaching Universities.

Lewis, Peter and Gagg, Colin (2010). Forensic polymer engineering: why polymer products fail in service. Cambridge: Woodhead Publishing Limited.

Lewis, Peter R.; Reynolds, Ken and Gagg, Colin (2003). Forensic Materials Engineering: Case Studies. UK: CRC Press.

Marino, Armando (2012). A New Target Detector Based on Geometrical Perturbation Filters for Polarimetric Synthetic Aperture Radar (POL-SAR). Springer Theses. Heidelberg: Springer.

McMillan, Elizabeth (2003). Complexity, organizations and change. UK: Routledge.

McMillan, Elizabeth (2008). Complexity, Management and the Dynamics of Change: Challenges for Practice. UK: Routledge.

Michtell, John V. and Peake, Stephen (1994). An Oil Agenda for Europe. London: Brookings.

Midgley, G. and Reynolds, M. (2001). Operational research and environmental management: a new agenda enhancing the contribution of operational research to environmental planning and management: a report to the OR Society. Operational Research Society.

Mistry, Jayalaxshmi and Berardi, Andrea (2006). Savannas and dry forests: linking people with nature. UK: Ashgate.

Mohan, Giles; Lampert, Ben; Tan-Mullins, May and Chang, Daphne (2014). Chinese Migrants and Africa's Development: New Imperialists or Agents of Change? London: Zed Books.

Murphy, Joseph and Levidow, Les (2006). Governing the Transatlantic conflict over agricultural biotechnology: contending coalitions, trade liberalisation and standard-setting. Genetics and Society. London, UK: Routledge.

Nold, Christian; Aubret, Nathalie and Jaschko, Susanne (2014). Autopsy Of An Island Currency. Pixelache.

Nold, Christian and van Kranenburg, Rob (2011). The Internet of People for a Post-Oil World. Situated Technologies Pamphlets, 8. New York, NY, USA: The Architectural League of New York.

Nuttall, William J. (2022). Nuclear Renaissance: Technologies and Policies for the Future of Nuclear Power (Second Edition). Boca Raton, Florida, USA: CRC Press (part of the Taylor and Francis group).

Nuttall, W. J. (2019). Britain and the Bomb - Technology, Culture and the Cold War. Dunbeath, Caithness, Scotland: Whittles Publishing.

Nuttall, William; Ibarra-Yunez, Alejandro; Trzmielak, Dariusz and Gibson, David (2019). The smart future. ICE Publishing, pp. 3–16.

Nuttall, William James and Bakenne, Adetokunboh T. (2020). Fossil Fuel Hydrogen: Technical, Economic and Environmental Potential. Switzerland: Springer International Publishing.

Oyelaran-Oyeyinka, Banji (2006). Learning to compete in African industry: institutions and technology in development. Aldershot, UK: Ashgate.

Oyelaran-Oyeyinka, Banji and Lal, Kaushalesh (2006). SMEs and New Technologies: Learning E-Business and Development. Palgrave Macmillan.

Peake, Stephen (1994). Transport in transition: lessons from the history of energy. London: Earthscan Publications.

Peake, Stephen (1997). Vehicle and fuel challenges beyond 2000: Market impacts of the EU's Auto Oil programme (FT management report). FT Management Reports. London: Financial Times.

Peake, Stephen and Schipper, Lee (1997). Transport, Energy and Climate Change. Energy and environment policy analysis series. Paris: Organisation for Economic Cooperation and Development (OECD).

Peake, Stephen and Smith, Joe (2009). Climate Change: From Science to Sustainability. Oxford, UK: Oxford University Press.

Phillips, Richard; Blackmore, Paul; Anderson, Jane; Clift, Mike; Aguilo-Rullan, Antonio and Pester, Steve (2007). Micro-wind turbines in urban environments - an assessment. Watford: BRE Press.

Plumbridge, W.J.; Matela, R.J. and Westwater, A. (2004). Structural integrity and reliability in electronics: enhancing performance in a lead-free environment. The Netherlands: Springer.

Potter, Stephen (1997). Vital Travel Statistics: a compendium of data and analysis about transport activity in Britain. London: Landor.

Roy, Robin (2024). Creative Design and Innovation: How to produce successful products and buildings. Abingdon, Oxon: Routledge.

Roy, Robin (2015). Consumer Product Innovation and Sustainable Design: The evolution and impacts of successful products. Abingdon, Oxfordshire, UK: Routledge.

Roy, Robin and Wield, David (1986). Product design and technological innovation. UK: Open University Press.

Spear, Roger; Leonetti, Aude and Thomas, Alan (1994). Third sector care: prospects for co-operative and other small care providers. Co-operatives Research Unit, The Open University.

Thornback, Jane; Snowden, Carmen; Anderson, Jane and Foster, Chris (2015). Water Efficiency: the contribution of construction products. London: Construction Products Association.

Walsh, Vivien; Roy, Robin; Bruce, Margaret and Potter, Stephen (1992). Winning by Design: Technology, Product Design and International Competitiveness. Oxford, UK: Blackwell Publishers.

Williams, Keith; Kear, Karen and Rosewell, Jon (2012). Quality Assessment for E-learning: a Benchmarking Approach (2nd ed.). Heerlen, The Netherlands: European Association of Distance Teaching Universities (EADTU).

Yoxon, Mark; Burnley, Stephen and Gladding, Toni (2006). Environment management report. Focus on Waste Management. London: British Standards Institution.

Zamenopoulos, Theodore and Alexiou, Katerina (2018). Co-design As Collaborative Research. Connected Communities Foundation Series. Bristol: Bristol University/AHRC Connected Communities Programme.

Edited BookTo Top

Alexiou, Aikaterini; Johnson, Jeffrey and Zamenopoulos, Theodore eds. (2009). Embracing complexity in design. UK: Routledge.

Bell, Simon and Morse, Stephen eds. (2018). Routledge Handbook of Sustainability Indicators. Routledge International Handbooks. London: Routledge.

Borzaga, C. and Spear, R. eds. (2004). Trends and challenges for co-operatives and social enterprises in developed and transition countries. Trento, Italy: Fondazione Cariplo.

Boyle, Godfrey ed. (2004). Renewable energy. 2nd edition. Oxford, UK: Oxford University Press & The Open University.

Boyle, Godfrey ed. (2007). Renewable electricity and the grid: the challenge of variability. London, UK: Earthscan Publications Ltd.

Boyle, Godfrey ed. (2012). Renewable Energy: Power for a Sustainable Future (3rd ed.). Oxford: Oxford University Press and Open University.

Boyle, Godfrey; Everett, Robert and Ramage, Janet eds. (2003). Energy Systems and Sustainability. Oxford, UK: Oxford University Press.

Eckert, Claudia and Clarkson, John eds. (2005). Design Process Improvement. Springer.

Elliott, David ed. (2007). Nuclear or not? Does nuclear power have a place in a sustainable energy future? Energy, Climate and the Environment Series. Basingstoke UK: Palgrave Macmillan.

Elliott, David ed. (2003). Energy, Society and Environment (Second Edition). Routledge Introductions to Environment. Abingdon, UK: Routledge.

Everett, Bob; Peake, Stephen and Warren, James eds. (2021). Energy Systems and Sustainability: Power for a Sustainable Future (3rd ed.). Oxford, UK: Oxford University Press.

Everett, Robert; Boyle, Godfrey; Peake, Stephen and Ramage, Janet eds. (2012). Energy Systems and Sustainability: Power for a Sustainable Future (2nd ed.). Oxford: Oxford University Press.

Fawssett, Susan; Hanlin, Rebecca; Le Mare, Ann; Papaioannou, Theodoros and Wilson, Gordon eds. (2009). Introducing Development. Milton Keynes: Open University Worldwide.

Fitzpatrick, M.E. and Lodini, Alain eds. (2003). Analysis of residual stress using neutron and synchrotron radiation. London, UK: Taylor & Francis.

Garner, Steve ed. (2008). Writing on Drawing: Essays on Drawing Practice and Research. Bristol, UK: Intellect.

Garner, Steven and Evans, Chris eds. (2012). Design and Designing. A Critical Introduction. London: Berg.

Hoff, Jens; Horrocks, Ivan and Tops, Pieter eds. (2000). Democratic Governance and New Technology: Technologically Mediated Innovations in Political Practice in Western Europe. Routledge/ECPR Studies in European Political Science, 9. London: Routledge.

Johnson, Jeffrey; Nowak, Andrzej; Ormerod, Paul; Rosewell, Bridget and Zhang, Yi-Cheng eds. (2017). Non-Equilibrium Social Science and Policy: Introduction and Essays on New and Changing Paradigms in Socio-Economic Thinking. Understanding Complex Systems. Cham, Switzerland: Springer.

Lévêque, François; Glachant, Jean-Michel; Barquin, Julian; von Hirschhausen, Christian; Holz, Franziska and Nuttall, William J. eds. (2010). Security of Energy Supply in Europe: Natural Gas, Nuclear and Hydrogen. Loyola de Palacio Series on European Energy Policy. Cheltenham, UK: Edward Elgar.

Lloyd, P. and Christiaans, H. M. C. M eds. (2001). Designing in Context: Proceedings of Design Thinking Research Symposium 5. Delft, The Netherlands: Delft University Press.

Lundgaard Andersen, Linda; Gawell, Malin and Spear, Roger eds. (2016). Social Entrepreneurship: A Nordic Perspective. Routledge Studies in Social Enterprise and Social Innovation. Abingdon: Routledge.

Mackintosh, Maureen; Chataway, Joanna and Wuyts, Marc eds. (2008). Promoting Innovation, Productivity and Industrial Growth and Reducing Poverty. Oxon, UK: Routledge.

McDonnell, Janet and Lloyd, Peter eds. (2009). About: Designing - Analysing Design Meetings. UK: CRC Press.

Mytelka, Lynn ed. (2007). Innovation and economic development. London: Edward Elgar.

Nold, Christian ed. (2009). Emotional Cartography: Technologies of the Self. Space Studios.

Nuttall, William; Clarke, Richard and Glowacki, Bartek eds. (2012). The Future of Helium as a Natural Resource. Routledge Explorations in Environmental Economics. Abingdon, UK: Routledge.

Nuttall, William; Webbe-Wood, David; Konishi, Satoshi and Takeda, Shutaro eds. (2020). Commercialising Fusion Energy - how small businesses are transforming big science. Bristol: Institute of Physics Publishing.

Nuttall, William J.; Gibson, David V.; Trzmielak, Dariusz and Ibarra-Yunez, Alejandro eds. (2019). Energy and Mobility in Smart Cities: International perspectives on innovation. London: ICE Publishing.

Oyelaran-Oyeyinka, Banji and McCormick, Dorothy eds. (2007). Industrial clusters and innovation systems in Africa. Tokyo: United Nations University Press.

Peake, Stephen ed. (2017). Renewable Energy: Power for a Sustainable Future (4th Ed.). Oxford: Oxford University Press.

Reynolds, M and Holwell, S eds. (2020). Systems approaches to making change: a practical guide (Table of contents and Preface to 2nd edition). London: Open University and Springer.

Reynolds, Martin; Blackmore, Chris and Smith, Mark J. eds. (2009). The Environmental Responsibility Reader. London, UK: Zed Books and The Open University.

Rhodes, Ed; Warren, James P. and Carter, Ruth eds. (2006). Supply chains and total product systems: a reader. Padstow, Cornwall, UK: Blackwells.

Robbins, Peter and Huzair, Farah eds. (2011). Exploring Central And Eastern Europe's Biotechnology Landscape. The International Library of Ethics Law and Technology, 9. Dordrecht: Springer.

Robertson, Judy; Williams, Alison; Jones, Derek; Isbel, Lara and Loads, Daphne eds. (2017). EqualBITE: Gender equality in higher education. Rotterdam: Sense Publishers.

Spear, Roger; Defourny, Jacques; Favreau, Louis and Laville, Jean-Louis eds. (2001). Tackling social exclusion in Europe: the contribution of the social economy. UK: Ashgate.

van Geenhuizen, Marina; Nuttall, William J.; Gibson, David and Oftedal, Elin M. eds. (2010). Energy and Innovation: Structural Change and Policy Implications. International Series on Technology Policy and Innovation. West Lafayette, IN: Purdue University Press.

Warren, J. P. ed. (2007). Managing Transport Energy. Power for a Sustainable Future, 3. Oxford: Oxford University Press, in association with The Open University.

Williams, Alison; Jones, Derek and Robertson, Judy eds. (2014). BITE: Recipes for Remarkable Research. Rotterdam: Sense Publishers.

Cugurullo, Federico; Caprotti, Federico; Cook, Matthew; Karvonen, Andrew; McGuirk, Pauline and Marvin, Simon eds. (2024). Artificial Intelligence and the City: Urbanistic Perspectives on AI. Routledge.

Elliott, David ed. (2007). Sustainable Energy: Opportunities and Limitations. Energy, Climate and the Environment. Basingstoke, UK: Palgrave Macmillan.

Neighbour, Gareth ed. (2012). Modelling and measuring reactor core graphite properties and performance. Special Publication, 342. London: Royal Society of Chemistry.

Neighbour, Gareth and Oraifige, Ilias eds. (2017). Thoughts and Reflections on the Use of Magnesium. Birmingham: Birmingham City University.

Oreszczyn, Sue and Lane, Andy eds. (2017). Mapping environmental sustainability: Reflecting on systemic practices for participatory research. Bristol: Policy Press.

Reynolds, Martin and Holwell, Sue eds. (2010). Systems Approaches to Managing Change: A Practical Guide. London: Springer.

Shirzadi, Amir and Jackson, Susan eds. (2014). Structural Alloys for Power Plants: Operational Challenges and High-Temperature Materials. Elsevier Ltd..

Book SectionTo Top

Abolhasani, Morteza; Oakes, Steve and Golrokhi, Zahra (2021). Advertising Music and the Effects of Incongruity Resolution on Consumer Response. In: Waiguny, Martin and Rosengren, Sara eds. Advances in Advertising Research: Designing and Communicating Experience, Volume XI. Springer Gabler, pp. 183–193.

Addis, Mark; Eckert, Claudia and Stacey, Martin (2023). Past Designs as Repositories of Tacit Collective Knowledge. In: Fritzsche, Albrecht and Santa-María, Andres eds. Rethinking Technology and Engineering - Dialogues Across Disciplines and Geographies. Philosophy of Engineering and Technology (45). Cham: Springer, pp. 55–66.

Aiken, Mike; Spear, Roger; Lyon, Fergus; Teasdale, Simon; Hazenberg, Richard; Bull, Mike and Kopec Massey, Anna (2021). Social enterprise in the UK: Models and trajectories. In: Defourney, Jacques and Nyssens, Marthe eds. Social Enterprise in Western Europe. Routledge Studies in Social Enterprise & Social Innovation. Routledge, pp. 253–268.

Alevizou, Giota; Alexiou, Katerina; Harte, Dave; Sobers, Shawn; Zamenopoulos, Theodore and Turner, Jerome (2016). Civic cultures and modalities of place-making. In: Hargreaves, Ian and Hartley, John eds. The creative citizen unbound: How social media and DIY culture contribute to democracy, communities and the creative economy. Bristol: Policy Press, pp. 205–230.

Alexiou, Katerina (2009). Complexity and coordination in collaborative design. In: Alexiou, Katerina; Johnson, Jeffrey and Zamenopoulos, Theodore eds. Embracing Complexity in Design. London, UK: Routledge, pp. 73–93.

Alexiou, Katerina; Aguista, Emma; Alevizou, Giota; Chapain, Caroline; Greene, Catherine; Harte, Dave; Ramster, Gail and Zamenopoulos, Theodore (2016). Asset mapping and civic creativity. In: Hargreaves, Ian and Hartley, John eds. The creative citizen unbound: How social media and DIY culture contribute to democracy, communities and the creative economy. Bristol: Policy Press, pp. 181–204.

Alexiou, Katerina; Alevizou, Giota and Zamenopoulos, Theodore (2014). Wards Corner Community Plan Case Study. In: Lockton, D; Greene, K.; Casey, A; Raby, L and Vickress, A eds. Variety Pack: Inspiring Digital Ideas From Community Projects. London: Helen Hamlyn Centre for Design.

Alexiou, Katerina; Johnson, Jeffrey and Zamenopoulos, Theodore (2010). Embracing complexity in design: emerging perspectives and opportunities. In: Inns, Tom ed. Designing for the 21st century: research methods & findings, Volume 2. United Kingdom: Gower Ashgate, pp. 87–100.

Alexiou, Katerina; Zamenopoulos, Theodore and Gilbert, Sam (2011). Imaging the designing brain: a neurocognitive exploration of design thinking. In: Gero, John S. ed. Design Computing and Cognition '10. London: Springer, pp. 489–504.

Anderson, Jane and Jones, Derek (2024). Real and apparent variations in embodied carbon impacts provided in EPD for construction products. In: Azari, Rahman and Moncaster, Alice eds. The Routledge Handbook of Embodied Carbon in the Built Environment. Abingdon, Oxon: Routledge, pp. 335–358.

Anderson, Jane (2017). Sustainable construction material selection and specification. In: Strong, David and Burrows, Victoria eds. A Whole-System Approach to High-Performance Green Buildings. Artech House, p. 44.

Anderson, Jane; Beavan, Michael; Galeazzi, Francesca; Keeping, Miles; Shiers, David and Steele, Kristian (2017). Materials. In: Keeping, Miles and Shiers, David eds. Sustainable Built Environments: Principles and Practice. Oxford: Wiley, pp. 145–158.

Ariyo, O. O; Eckert, Claudia and Clarkson, P. J. (2007). Unpleasant surprises in the design of complex products: why do changes propagate? In: Design Engineering Division, ASME and Computers and Information in Engineering Division, ASME eds. Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 2006. New York: American Society of Mechanical Engineers.

Ariyo, O. O.; Eckert, Claudia and Clarkson, P. J. (2006). On the use of function, behaviour and structural relations as clues for predicting engineering change propagation. In: Marjanovic, Dorian ed. Proceedings of the 9th International Design Conference. Glasgow, UK: The Design Society.

Ashley, Stephen F.; Nuttall, William J. and Heffron, Raphael J. (2016). The present status of nuclear third-party liability and nuclear insurance. In: Heffron, Raphael J. and Little, Gavin F. M. eds. Delivering energy law and policy in the EU and the US: A reader. Edinburgh: Edinburgh University Press, pp. 251–255.

August, Elias; Eckert, Claudia and Clarkson, P. John (2004). Using design structure matrices in visualizing design. In: Malcolm, Grant ed. Multidisciplinary Approaches to Visual Representations and Interpretations. Studies in Multidisciplinarity, 2. Amsterdam: Elsevier, pp. 305–318.

Backhaus, J.; de Carteret, R.; Damerius, L.; Huang, Y. Y.; Pfisterer, A.; Pöll, C.; Huppenbauer, M.; Rahn, E.; Reynolds, M. and Wallimann-Helmer, I. (2019). Introduction to critical systems heuristics. In: Paschke, M. and Dahinden, M. eds. Applying Collective Inquiry. Engaging in the science-policy dialogue (Workbook 8). Zurich: Zurich-Basel Plant Science Center, pp. 42–45.

Barratt, R. S. (2000). Dust: measurement of trace elements in. In: Mayers, R. A. ed. Encyclopaedia of analytical chemistry: applications, theory and instrumentation, Volume 15. Chichester: John Wiley & Sons Ltd, pp. 4669–4693.

Bartlett, Anne-Marie (2020). Unfriended. In: Mitchell, Ian ed. Someone Somewhere Document Your Culture. Graphic Arts (02). Liverpool: Studio Editions.

Bell, Simon (2017). ‘Imagine’: mapping sustainability indicators. In: Oreszczyn, Sue and Lane, Andy eds. Mapping environmental sustainability: reflecting on systemic practices for participatory research. Bristol: Policy Press, pp. 183–204.

Bell, Simon and Morse, Stephen (2018). Indicators and Post Truth. In: Bell, Simon and Morse, Stephen eds. Routledge Handbook of Sustainability Indicators and Indices. London, UK: Routledge, pp. 1–18.

Bell, Simon and Morse, Stephen (2018). Participatory Approaches for the Development and Evaluation of Sustainability Indicators. In: Bell, Simon and Morse, Stephen eds. Routledge Handbook of Sustainability Indicators and Indices. Routledge International Handbooks. London: Routledge.

Bell, Simon and Morse, Stephen (2018). What Next? In: Bell, Simon and Morse, Stephen eds. Routledge Handbook of Sustainability Indicators and Indices. Routledge International Handbooks. London: Routledge, pp. 543–556.

Bell, Simon and Morse, Stephen (2017). A basis for systemic sustainability measurement: an update. In: Caradonna, Jeremy L. ed. Routledge Handbook of the History of Sustainability. Abingdon: Routledge, 187 -218.

Bell, Simon and Wood-Harper, Trevor (2007). Story telling in Action Research projects: Malta, Bangladesh, Lebanon and Slovenia. In: Kock, Ned ed. Information Systems Action Research: Bridging the Industry-University Technology Gap. New York: Springer, pp. 161–192.

Berardi, Andrea; Mistry, Jay; Haynes, Lakeram; Jafferally, Deidre; Bignante, Elisa; Albert, Grace; Xavier, Rebecca; Benjamin, Ryan and de Ville, Geraud (2017). Using visual approaches with Indigenous communities. In: Oreszczyn, Sue and Lane, Andy eds. Mapping environmental sustainability: reflecting on systemic practices for participatory research. Bristol: Policy Press, pp. 103–128.

Berardi, Andrea and Mistry, Jayalaxshmi (2006). A multidisciplinary and participatory research approach in savannas and dry forests. In: Mistry, Jayalaxshmi and Berardi, Andrea eds. Savannas and dry forests: linking people with nature. Aldershot, UK: Ashgate, pp. 265–271.

Bettley, Alison and Burnley, Stephen (2008). Towards Sustainable Operations Management Integrating Sustainability Management into Operations Management Strategies and Practices. In: Misra, Krishna B. ed. Handbook on Performability Engineering. London, UK: Springer-Verlag, pp. 875–904.

Bettley, Alison and Horrocks, Ivan (2018). Emergent versus Planned Assessment and Tuition Strategies for Online Postgraduate Teaching of Technology and Innovation Management at the Open University, UK. In: Khare, Anshuman and Hurst, Deborah eds. On the Line: Business Education in the Digital Age. Geneva: Springer, pp. 55–73.

Bettley, Alison; Mayle, David and Tantoush, Tarek (2005). Operations as strategy. In: Bettley, Alison; Mayle, David and Tantoush, Tarek eds. Operations Management: a strategic approach. London: Sage.

Bettley, Alison; Mayle, David and Tantoush, Tarek (2005). Approaches and techniques. In: Bettley, Alison; Mayle, David and Tantoush, Tarek eds. Operations Management: a strategic approach. London: Sage.

Bettley, Alison; Mayle, David and Tantoush, Tarek (2005). The role of technology. In: Bettley, Alison; Mayle, David and Tantoush, Tarek eds. Operations Management: a strategic approach. London: Sage.

Bettley, Alison; Mayle, David and Tantoush, Tarek (2005). Human issues. In: Bettley, Alison; Mayle, David and Tantoush, Tarek eds. Operations management: a strategic approach. London: Sage.

Bettley, Alison; Mayle, David and Tantoush, Tarek (2005). Reflections, implications and propositions. In: Bettley, Alison; Mayle, David and Tantoush, Tarek eds. Operations Management: a strategic approach. London: Sage.

Black, Sandy; Burcikova, Mila; Williams, Dilys; Rocamora, Agnès; Lyon, Fergus; Werner, Andrea; Vickers, Ian; Elf, Patrick; Eckert, Claudia and Crommentuijn-Marsh, Philippa (2024). Fostering sustainable practices: The case of micro and small designer fashion enterprises. In: Charter, Martin; Pan, Bernice and Black, Sandy eds. Accelerating Sustainability in Fashion, Clothing and Textiles. Abingdon, Oxon: Routledge, pp. 128–140.

Blackmore, Chris; Foster, Natalie; Collins, Kevin and Ison, Ray (2017). Understanding and developing communities of practice through diagramming. In: Oreszczyn, Sue and Lane, Andy eds. Mapping environmental sustainability: reflecting on systemic practices for participatory research. London: Policy Press, pp. 155–182.

Blackmore, Chris; Ison, Raymond and Reynolds, Martin (2015). Thinking differently about sustainability: experiences from the UK Open University. In: Filho, Walter Leal; Azeiteiro, Ulisses; Alves, Fátima and Caeiro, Sandra eds. Integrating Sustainability Thinking in Science and Engineering Curricula. World Sustainability Series. Cham: Springer, pp. 613–630.

Blackmore, Chris; Reynolds, Martin; Ison, Raymond and Lane, Andrew (2015). Embedding sustainability through systems thinking in practice: some experiences from the Open University. In: Wyness, Lynne ed. Education for Sustainable Development Pedagogy: Criticality, Creativity, and Collaboration. PedRIO occasional papers (8). Plymouth University: Pedagogic Research Institute and Observatory (PedRIO), pp. 32–35.

Blackmore, Roger (2009). Climate change: causes and consequences. In: Wilson, Gordon; Furniss, Pamela and Kimbowa, Richard eds. Environment, Development, and Sustainability: Perspectives and cases from around the world. Oxford, UK: Oxford University Press, pp. 103–112.

Boehnert, J; Dewberry, E L and Wilson, Garrath (2022). If you're not in an existential crisis as a designer in Sustainable Design, you're not doing it right! In: Tsekleves, Emmanuel and Noel, Lesley-Ann eds. The Little Book of Designer's Existential Crises in 2022. Lancaster: University of Lancaster, pp. 19–22.

Booth, Colin A. and Gleed, Fiona M. (2024). More than just sandbags: a review of temporary and demountable flood barrier choices and complications. In: Lamond, Jessica; Proverbs, David and Battacharya Mis, Namrata eds. Research Handbook on Flood Risk Management. Edward Elgar Publishing, pp. 112–131.

Bostwick-Lorenzo Eiroa, Meredith and Jones, Derek (2014). The spatial and social constructs of creative situations. In: Williams, Alison; Jones, Derek and Robertson, Judy eds. BITE: Resipes for Remarkable Research. Rotterdam: Sense Publishers, pp. 260–266.

Bouchard, P. J. (2001). Residual stresses in lifetime and structural integrity assessment. In: Buschow, K. H. J. ed. Encyclopedia of Materials: Science and Technology. Oxford, UK: Elsevier, pp. 8134–8142.

Bouchard, P. J. and Withers, P. J. (2006). Identification of residual stress length scales in welds for fracture assessment. In: Youtsos, A. G. ed. Residual stress and its effects on fatigue and fracture: Proceedings of a Special Symposium held within the 16th European Conference on Fracture - ECF16, Alexandroupolis, Greece, Part 4. Springer Netherlands, pp. 163–176.

Bowen, James; Cheneler, David; Andrews, James W.; Wu, Chuan-Yu; Ward, Michael C. L. and Adams, Michael J. (2012). Rebound of a particle from a solid surface with a viscous or nonlinear viscoelastic liquid film in the contact zone. In: Wu, Chuan-Yu ed. Discrete Element Modelling of Particulate Media. Special publication (339). Cambridge, UK: Royal Society of Chemistry, pp. 86–94.

Bowen, James; Cheneler, David; Ward, Michael C. L. and Adams, Michael J. (2011). The influence of wetting on the buoyancy of particles. In: Wu, C. Y. and Ge, W. eds. Particulate Materials: Synthesis, Characterisation, Processing and Modelling. Special publication (334). Cambridge, UK: Royal Society of Chemistry, pp. 213–218.

Boyle, Godfrey (2004). Photovoltaic power. In: ed. Renewable energy: power for a sustainable future [2nd ed.]. Oxford, UK: Oxford University Press, pp. 66–104.

Boyle, Godfrey (2004). Solar Photovoltaics. In: Boyle, Godfrey ed. Renewable Energy (2nd Edition). Oxford University Press, pp. 66–104.

Boyle, Godfrey (2012). Solar Photovoltaics. In: Boyle, Godfrey ed. Renewable Energy: Power for a Sustainable Future (3rd edition). Oxford: Oxford University Press, in association with The Open University, pp. 75–115.

Boyle, Godfrey (2003). Remedies. In: Boyle, Godfrey; Everett, Bob and Ramage, Janet eds. Energy systems and sustainability. Oxford, UK: Oxford University Press, pp. 573–596.

Boyle, Godfrey (2003). Introductory Overview: Why Sustainable Energy Matters. In: Boyle, Godfrey; Everett, Bob and Ramage, Janet eds. Energy Systems and Sustainability: Power for a Sustainable Future. Oxford, UK: Oxford University Press, pp. 1–54.

Boyle, Godfrey (2007). Non-nuclear sustainable energy futures for Germany and the UK. In: Elliott, David ed. Nuclear or not? Does nuclear power have a place in a sustainable energy future? London, UK: Palgrave Macmillan, pp. 183–196.

Boyle, Godfrey (2007). A Tale of Two Countries: Non-Nuclear Sustainable Energy Futures for the Germany and the UK. In: Elliott, David ed. Nuclear or not?: Does nuclear power have a place in a sustainable energy future? Energy, Climate and the Environment. Basingstoke, UK: Palgrave Macmillan, pp. 183–196.

Boyle, Godfrey (2009). Cities and climate change: leading to a low carbon London. In: Wilson, Gordon; Furniss, Pamela and Kimbowa, Richard eds. Environment, Development, and Sustainability: Perspectives and cases from around the world. Oxford, UK: Oxford University Press, pp. 185–193.

Boyle, Godfrey; Peake, Stephen and Everett, Robert (2012). Remedies: towards a sustainable energy future. In: Everett, Robert; Boyle, Godfrey; Peake, Stephen and Ramage, Janet eds. Energy Systems and Sustainability: Power for a Sustainable Future (2nd edition). Oxford: Oxford University Press, in association with The Open University, pp. 571–621.

Bright, Keren and Muraguri, Lois (2011). Access to medicines: intellectual property rights, human rights and justice. In: Voiculescu, Aurora and Yanacopulos, Helen eds. The Business of Human Rights. An Evolving Agenda for Corporate Responsibility. Human Rights; Business. London, UK and New York, USA: Zed Books in association with the Open University, pp. 101–121.

Bujokas de Siqueira, Alexandra; Berardi, Andrea; Mistry, Jayalaxshmi and Rothberg, Danilo (2016). Experimenting with Media Education, Civic Engagement, and Sustainability in Brazilian Schools. In: Robinson, Laura; Schulz, Jeremy and Dunn, Hopeton S. eds. Communication and Information Technologies Annual: Digital Empowerment: Opportunities and Challenges of Inclusion in Latin America and the Caribbean. Studies in Media and Communications, 12. Emerald Group Publishing Limited.

Caird, S. and Roy, R. (2018). Blended Learning and Sustainable Development. In: Leal Filho, W. ed. Encyclopaedia of Sustainability and Higher Education. Springer, Cham.

Caird, S. and Roy, R. (2019). Sustainable Higher Education Systems. In: Leal Filho, W. ed. Encyclopaedia of Sustainability and Higher Education. Springer, Cham.

Caird, S. P. (2019). Measurement and Evaluation of Smart City Outcomes for Smarter Governance. In: Nuttall, W.; Gibson, D.; Ibarra-Yunez, A. and Trzmielak, D. eds. Energy and Mobility in Smart Cities. Institution of Civil Engineers Publishing, UK, pp. 167–185.

Caird, Sally; Lane, Andrew and Swithenby, Ed (2013). ICTs and the design of sustainable higher education teaching models: an environmental assessment of UK courses. In: Caeiro, S.; Leal Filho, W.; Jabbour, C. J. C. and Azeiteiro, U. M. eds. Sustainability Assessment Tools in Higher Education – Mapping Trends and Good Practices at Universities round the World. Cham, Switzerland: Springer International Publishing, pp. 375–386.

Caird, Sally; Lane, Andrew and Swithenby, Edward (2014). Greening Higher Education qualification programmes with online learning. In: Leal Filho, W.; Azeiteiro, U. and Caeiro, S. eds. E-learning and sustainability. Umweltbildung, Umweltkommunikation und Nachhaltigkeit - Environmental Education, Communication and Sustainability, 35. Frankfurt am Main, Berlin, Bern, Bruxelles, New York, Oxford, Wien: Peter Lang Scientific Publishers, pp. 105–116.

Caird, Sally and Roy, Robin (2010). Yes in my back yard: UK householders pioneering technologies. In: Devine-Wright, Patrick ed. Renewable Energy and the Public. London: Earthscan, pp. 203–219.

Campoli, Alessandra (2007). Chintamani: Il Gioiello degli Dei. In: Macioce, Stefania ed. Ori nell'Arte: Per una storia del potere segreto delle gemme. Roma: Logart Press, pp. 144–161.

Campoli, Alessandra (2004). Le Stregonerie di Salvator Rosa. In: Macioce, Stefania ed. L'Incantesimo di Circe. Temi di magia nella pittura di Dosso Dossi e Salvator Rosa. Roma: Logart Press, pp. 158–185.

Carr, Susan; Thomas, Alan; Okpara, Enoch; Mpande, Roger and Humphreys, David (2001). NGO Influence at the International Negotiating Committee for a Convention to Combat Desertification: Perspectives from Zimbabwe and Nigeria. In: Thomas, Alan; Carr, Susan and Humphreys, David eds. Environmental Policies and NGO Influence: Land Degradation and Sustainable Resource Management in Sub-Saharan Africa. Routledge Research Global Environmental Change. London: Routledge, pp. 39–56.

Chataway, J.; Chaturvedi, K.; Hanlin, R.; Mugwagwa, J.; Wield, D. and Smith, J. (2009). Technological trends and opportunities to combat diseases of the poor in Africa. In: Kalua, Fetson; Awotedu, Abolade; Kamwanja, Leonard and Saka, John eds. Science, Technology and Innovation for Public Health in Africa. Pretoria, Republic of South Africa.: NEPAD Office of Science and Technology, pp. 53–93.

Chataway, Jo; Hanlin, Rebecca; Muraguri, Lois and Wamae, Watu (2009). PDPs as social technology innovators in global health: operating above and below the radar. In: Penea, Oana ed. Innovating for the Health of All. Global Forum Update on Research for Health (6). Geneva: Global Forum for Health Research, pp. 123–126.

Chataway, Joanna; Chaturvedi, Kalpana; Hanlin, Rebecca; Mugwagwa, Julius; Smith, James and Wield, David (2009). Building the case for systems of health innovation in Africa. In: Kalua, Fetson; Awotedu, Abolade; Kamwanja, Leonard and Saka, John eds. Science, Technology and Innovation for Public Health in Africa. Pretoria, Republic of South Africa: NEPAD Office of Science and Technology, pp. 7–52.

Ching-Chiang, Lay-Wah Carolina; Fernández-Cárdenas, Juan Manuel; Lotz, Nicole; González-Nieto, Noé Abraham; Gaved, Mark; Jones, Derek; Díaz de León, Alejandra and Machado, Rafael (2022). From Digital Divide to Digital Discovery: Re-thinking Online Learning and Interactions in Marginalized Communities. In: Abdelnour-Nocera, José; Makori, Elisha Ondieki; Robles-Flores, Jose Antonio and Bitso, Constance eds. Innovation Practices for Digital Transformation in the Global South: IFIP WG 13.8, 9.4, Invited Selection. IFIP Advances in Information and Communication Technology, 645. Springer, Cham, pp. 34–58.

Collins, Kevin (2014). Designing social learning systems for integrating social sciences into policy processes: Some experiences of water managing. In: Manfredo, M. J.; Vaske, J. J.; Rechkemmer, A. and Duke, E. A. eds. Understanding Society and Natural Resources: Forging New Strands of Integration across the Social Sciences. Amsterdam: Springer, pp. 229–251.

Collins, Trevor; Potter, Stephen and Jones, Ann (2006). Research presentations. In: Potter, Stephen ed. Doing Postgraduate Research (2nd ed). London: Sage Publications Ltd, pp. 228–250.

Comunian, Roberta and Alexiou, Katerina (2015). Mapping the complexity of creative practice: using cognitive maps to follow creative ideas and collaborations. In: Duxbury, Nancy; Garrett-Petts, W. .F and MacLennan, David eds. Cultural Mapping as Cultural Inquiry. Routledge Advances in Research Methods. Abingdon: Routledge, pp. 276–302.

Cook, Matthew (2023). Reimagining urban innovation. In: Haarstad, Håvard; Grandin, Jakob; Kjærås, Kristin and Johnson, Eleanor eds. Haste: The slow politics of climate urgency. London: UCL Press, pp. 200–210.

Cook, M. (2004). Understanding the potential opportunities provided by service orientated concepts to improve resource productivity. In: Bhamra, Tracy and Hon, Bernard eds. Design and Manufacture for Sustainable Development 2004. Bury St. Edmonds, UK: Professional Engineering Publishing Limited, pp. 123–134.

Cook, Matthew; Horne, Ralph; Potter, Stephen and Valdez, Alan-Miguel (2019). Exploring the epistemic politics of urban niche experiments. In: Jensen, Jens Stissing; Cashmore, Matthew and Späth, Philipp eds. The Politics of Urban Sustainability Transitions: Knowledge, Power and Governance. Abingdon, Oxon: Routledge, pp. 125–147.

Cornforth, Chris and Spear, Roger (2010). The governance of hybrid organisations. In: Billis, David ed. Hybrid Organizations and the Third Sector: Challenges for Practice, Theory and Policy. Basingstoke, UK: Palgrave, pp. 70–89.

Cross, Nigel (1992). Research in Design Thinking. In: Cross, Nigel; Dorst, Kees and Roozenburg, Norbert eds. Research in Design Thinking. Delft, the Netherlands: Delft University Press, pp. 3–10.

Cross, Nigel (2001). Design cognition: results from protocol and other empirical studies of design activity. In: Eastman, C.; Newstatter, W. and McCracken, M. eds. Design knowing and learning: cognition in design education. Oxford, UK: Elsevier, pp. 79–103.

Cross, Nigel (2018). Expertise in Professional Design. In: Ericsson, K. Anders; Hoffman, Robert R.; Kozbelt, Aaron and Williams, A. Mark eds. Cambridge Handbook of Expertise and Expert Performance (2nd ed). Cambridge: Cambridge University Press, pp. 372–388.

Cross, Nigel (2010). Understanding design thinking. In: Guerrini, Luca ed. Notes on Doctoral Research in Design: Contributions from the Politecnico di Milano. Serie di architettura e design. Strumenti. Milan: FrancoAngeli, pp. 19–38.

Cross, Nigel (2002). Creative cognition in design: processes of exceptional designers. In: Hewett, Tom and Kavanagh, Terence eds. Creativity and cognition. New York, USA: ACM Press, pp. 14–19.

Cross, Nigel (2007). From a design science to a design discipline: understanding designerly ways of knowing and thinking. In: Michel, Ralf ed. Design Research Now: Essays and Selected Projects. Basel: Birkhauser, pp. 41–54.

Cross, Nigel (2002). The nature and nurture of design ability. In: Owen-Jackson, Gwyneth ed. Design and Technology in Secondary Schools. Routledge.

Cugurullo, Federico; Caprotti, Federico; Cook, Matthew; Karvonen, Andrew; McGuirk, Pauline and Marvin, Simon (2024). Conclusions: The present of urban AI and the future of cities. In: Cugurullo, Federico; Caprotti, Federico; Cook, Matthew; Karvonen, Andrew; McGuirk, Pauline and Marvin, Simon eds. Artificial Intelligence and the City: Urbanistic Perspectives on AI. Routledge, pp. 361–389.

Cugurullo, Federico; Caprotti, Federico; Cook, Matthew; Karvonen, Andrew; McGuirk, Pauline and Marvin, Simon (2024). Introducing AI into urban studies. In: Cugurullo, Federico; Caprotti, Federico; Cook, Matthew; Karvonen, Andrew; McGuirk, Pauline and Marvin, Simon eds. Artificial Intelligence and the City: Urbanistic Perspectives on AI. Routledge, pp. 1–19.

Dewberry, Emma; Boehnert, Joanna and Sinclair, Matt (2024). Design Ecologies Exercise: The Innovation Landscape Matrix. In: Egenhoefer, Rachel Beth ed. Routledge Handbook of Sustainable Design, 2nd ed. London: Routledge, pp. 618–623.

Dewberry, Emma (2004). Factor 10: the changing landscape of learning. In: Bhamra, Tracy and Hon, Bernard eds. Design and Manufacture for Sustainable Development 2004. Bury St Edmunds, UK: Professional Engineering Publishing (Wiley), pp. 145–155.

Dewberry, Emma (2012). Eco-intelligence: Designing for the Real World. In: Garner, Steve and Evans, Chris eds. Design and Designing: A Critical Introduction. London: Berg.

Dum, Ralph and Johnson, Jeffrey (2017). Global Systems Science and Policy. In: Johnson, Jeffrey; Nowak, Andrzej; Ormerod, Paul; Rosewell, Bridget and Zhang, Yi-Cheng eds. Non-Equilibrium Social Science and Policy: Introduction and Essays on New and Changing Paradigms in Socio-Economic Thinking. Understanding Complex Systems. Cham, Switzerland: Springer, pp. 209–225.

Dye, D.; Roder, B.A.; Tin, S.; Rist, M.A.; James, J.A. and Daymond, M.R. (2004). Modeling and measurement of residual stresses in a forged IN718 superalloy disc. In: ed. Superalloys 2004. Warrendal, PA, USA: Minerals, Metals and Materials Society, pp. 315–322.

Earl, Christopher; Song, Dong Ping and Hicks, Christian (2003). Planning complex engineer-to-order products. In: Gogu, Grigore; Coutellier, Daniel; Chedmail, Patrick and Ray, Pascal eds. Recent Advances in Integrated Design and Manufacturing in Mechanical Engineering. Dordecht, Netherlands: Kluwer, pp. 463–472.

Earl, Chris; Johnson, Jeffrey and Eckert, Claudia (2005). Complexity. In: Clarkson, John and Eckert, Claudia eds. Design Process Improvement: A Review Of Current Practice. London, U.K.: Springer Science + Business Media, pp. 174–197.

Earl, Christopher; Eckert, Claudia and Johnson, Jeffrey (2005). Complexity of planning in design. In: Tumer, Irem Y.; Hayes, Caroline and Gupta, S. K. eds. Proceedings of the 2001 ASME Design Engineering Technical Conferences and Computers and Information in Engineering Conference. New York: American Society of Mechanical Engineers.

Eckert, Claudia and Clarkson, P.John (2022). The evolution of complex engineering systems. In: Maier, Anja; Oehmen, Josef and Vermaas, Pieter eds. Handbook of Engineering Systems Design. Springer, pp. 101–139.

Eckert, Claudia; Stacey, Martin and Earl, Christopher (2005). References to past designs. In: Gero, J. S. and Bonnardel, N. eds. Studying Designers '05. Sydney, Australia: Key Centre of Design Computing and Cognition, pp. 3–21.

Eckert, C. and Clarkson, P. (2004). If only I knew what you were going to do. Communication and planning in large organizations. In: Tichkiewitch, Serge and Brissaud, Daniel eds. Methods and Tools for Co-operative and Integrated Design. Dordrecht: Kluwer Academic Publishers, pp. 375–384.

Eckert, C. M. and Clarkson, P. J. (2002). Connectivity as a key to supporting design a state-action approach to planning. In: Gero, John S. ed. Artificial Intelligence in Design 02. Norwell, MA, USA: Kluwer Academic Publishers, pp. 479–502.

Eckert, C. M.; Earl, C. E. and Clarkson, P. J. (2005). Predictability of change in engineering: A complexity view. In: Design Engineering Division, ASME and Computers and Information in Engineering Division, ASME eds. 17th International Conference on Design Theory and Methodology. New York: American Society of Mechanical Engineers, pp. 341–350.

Eckert, C. M. and Stacey, M. K. (2010). What is a process model? Reflections on the epistemology of design process models. In: Heisig, Peter; Clarkson, John and Vanja, Sandor eds. Modelling and Management of Engineering Processes. New York, USA: Springer, pp. 3–14.

Eckert, C. M.; Zanker, W. and Clarkson, P. J. (2001). Aspects of a better understanding of changes. In: Culley, S. ed. Design Applications in Industry and Education. Bury St Edmunds: Professional Engineering Publishing, pp. 147–154.

Eckert, Claudia (2004). Status in industrial studies. In: Subrahmanian, E.; Sriram, R.; Herder, P.; Christiaans, H. and Schneider, R. eds. The Role of Empirical Studies in Understanding and Supporting Engineering Design. Delft: Delft University Press.

Eckert, Claudia (2014). Design for Values in the fashion and textile industry. In: van den Hoven, Jeroen; Vermaas, Pieter E. and van de Poel, Ibo eds. Handbook of Ethics, Values and Technological Design: Sources, Theory, Values and Application Domains. Springer Netherlands.

Eckert, Claudia and Clarkson, John (2005). The reality of design. In: Clarkson, John and Eckert, Claudia eds. Design Process Improvement: A Review of Current Practice. London: Springer, pp. 1–29.

Eckert, Claudia and Hillerbrand, Rafaela (2018). Models in Engineering Design: Generative and epistemic function of product models. In: Vermaas, Pieter and Vial, Stéphane eds. Advancements in the Philosophy of Design. Design Research Foundations. Springer, pp. 219–242.

Eckert, Claudia; Keller, R and Clarkson, P.J. (2009). Complexity in engineering design. In: Alexiou, Katerini; Johnson, Jeffrey and Zamenopoulos, Theodore eds. Embracing Complexity in Design. Routledge.

Eckert, Claudia; Maier, Anja and Mcmahon, Chris (2005). Communication in design. In: Clarkson, John and Eckert, Claudia eds. Design Process Improvement. London: Springer, pp. 232–261.

Eckert, Claudia and Schadewitz, Nicole (2011). Disziplinen der Produktentwicklung aus der Perspektive des angelsächsischen Raums. In: Banse, Gerhard and Fleischer, Lutz-Günther eds. Wissenschaft im Kontext. Inter- und Transdisziplinarität in Theorie und Praxis. Abhandlungen der Leibniz-Sozietät der Wissenschaften, Bd. 27 (27). Berlin: trafo wissenschaft verlag.

Eckert, Claudia and Stacey, Martin (1994). CAD systems and the division of labour in the knitwear industry. In: Adam, Alison; Emms, Judy; Green, Eileen and Owen, Jenny eds. Women, Work and Computerization: Breaking Old Boundaries - Building New Forms. Amsterdam: Elsevier, pp. 409–422.

Eckert, Claudia and Stacey, Martin (2014). Constraints and conditions: drivers for design processes. In: Chakrabarti, Amaresh and Blessing, Lucienne eds. An Anthology of Theories and Models of Design: Philosophy, Approaches and Empirical Explorations. London: Springer, pp. 395–415.

Eckert, Claudia and Stacey, Martin (1995). An architecture for the intelligent support of knitwear design. In: Sharpe, John E. E. ed. AI System Support for Conceptual Design: International Workshop on Engineering Design : Papers. Berlin: Springer, pp. 71–92.

Elliott, David (2003). A Sustainable Future? The limits to Renewables. In: Douthwaite, Richard ed. Before the Wells Run Dry. Dublin, Ireland: Feasta.

Elliott, David (2003). Sustainable energy: choices, problems and opportunities. In: Hester, R. E. and Harrison, R. M. eds. Sustainability and Environmental Impact of Renewable Energy Sources, Volume 19. The Royal Society of Chemistry, pp. 19–47.

Elliott, David (2005). Comparing support for renewable power. In: Lauber, Volkmar ed. Switching to renewable power: a framework for the 21st century. London, UK: Earthscan, pp. 219–227.

Elliott, David (2012). Windpower: opportunities, limits and challenges. In: Szarka, Joseph ed. Learning from Wind Power: Governance and Societal Perspectives on Sustainable Energy. Energy, Climate and Environment. Houndmills: Palgrave Macmillan, pp. 17–37.

Elliott, David (2019). Carbon Capture and Renewables: Strategic Conflicts or Tactical Complementarities. In: Wood, Geoffrey and Baker, Keith eds. The Palgrave Handbook of Managing Fossil Fuels and Energy Transitions. Switzerland: Palgrave Macmillan, pp. 25–55.

Elliott, David and Cook, Terry (2012). New Europe-New Energy: sustainable energy in the expanded EU. In: Shmelev, Stanislav and Shmeleva, Irina eds. Sustainability Analysis: An Interdisciplinary Approach. Houndmills: Palgrave Macmillan, pp. 254–278.

Elliott-Bowman, B. and Qin, R. (2015). The effects of electropulsing on metallic materials. In: Coval, H.H. and Gromov, B.E. eds. Modern Trends in Modification of Structure and Properties of Materials. TOMCK Publishing House HTO, pp. 165–193.

Ellis, Jane and Peake, Stephen (1996). Policy options to limit CO2 emissions from electricity supply. An OECD perspective. In: International Atomic Energy Agency, IAEA ed. Symposium on electricity, health and the environment: Comparative assessment in support of decision making. Vienna: International Atomic Energy Agency (IAEA), pp. 93–108.

Everett, Robert (2004). Solar Thermal Energy. In: Boyle, Godfrey ed. Renewable Energy (Second Edition). Oxford, UK: Oxford University Press, pp. 17–63.

Everett, Robert and Boyle, Godfrey (2004). Integration. In: Boyle, Godfrey ed. Renewable Energy (Second Edition). Oxford, UK: Oxford University Press, pp. 385–437.

Farooki, Masuma (2010). China's structural demand and commodity super cycle: implications for Africa. In: Dent, Christopher M. ed. China and Africa Development Relations. Routledge Contemporary China Series. Abingdon, UK and New York, NY, U.S.A.: Routledge, pp. 121–142.

Farooki, Masuma and Mohan, Giles (2012). The rising powers as drivers of development. In: Butcher, Melissa and Papaioannou, Theo eds. International Development in a Changing World. London: Bloomsbury Academic, pp. 99–123.

Flanagan, T. L.; Keller, R.; Eckert, Claudia and Clarkson, P. J. (2005). Rework revisited: the criticality of iteration due to task failure in NPD planning. In: Engineering Management Society, IEEE ed. 2005 IEEE International Engineering Management Conference. IEEE Operations Center.

Fletcher, Kate; Dewberry, Emma and Goggin, Phillip (2001). Sustainable Consumption by Design. In: Cohen, Maurie J. and Murphy, Joseph eds. Exploring Sustainable Consumption: Environmental Policy and the Social Sciences. London, UK: Pergamon (Elsevier), pp. 213–224.

Fortune, Joyce and Peters, Geoff (2006). Systems analysis of failures as a quality management tool. In: Smith, Denis and Elliott, Dominic eds. Key readings in crisis management: systems and structures for prevention and recovery. Routledge.

Fortune, Joyce and White, Diana (2002). Emergent or just unexpected? In: Ragsdell, G; West, D and Wilby, J eds. Systems theory and practice in the Knowledge Age: Proceedings of the Seventh International Conference of the UK Systems Society, held July 7th to 10th, 2002, at York University, UK. New York: Kluwer Academic/Plenum, pp. 3–10.

Ganguly, S.; Turski, M.; Fitzpatrick, M. E.; Edwards, L.; Smith, M. C. and Bouchard, P. J. (2008). Full field measurement of plastic flow properties in a multi-pass austenitic stainless steel weld specimen. In: O'Dowd, N. P. ed. Proceedings of the ASME Pressure Vessels and Piping Conference (PVP2008), Volume Vol 6,. ASME, pp. 403–414.

Garner, Steven and Evans, Chris (2012). Motivation and the learningscape of design. In: Garner, Steven and Evans, Chis eds. Design and Designing. A Critical Introduction. London: Berg.

Gaved, Mark; Dallison, Delphine; Jowers, Iestyn; Elliott-Cirigottis, Gary; Craig, Mark and Rochead, Alan (2016). RE:FORM - Reimagining Education for the Future Of Redistributed Manufacturing. In: Papadimitriou, Irini; Prescott, Andrew and Rogers, Jon eds. Engineering the Future: as part of the V&A Digital Design Weekend 2016. United Kingdom: Uniform Communications Limited, pp. 49–53.

Gehl Sampath, Padmashree (2004). Gender and the Agreement on Trade Related Aspects of Intellectual Property Rights: Exploring some interlinkages. In: Anh-Nga, Tran-Nguyen and Americo, Beviglia Zampetti eds. Trade and Gender: Opportunities and Challenges for Developing Countries. UNCTAD, pp. 251–291.

Gehl Sampath, Padmashree (2005). Focusing on Agricultural Biotechnology: Issues for Developing Countries. In: Melendez-Ortiz, Ricardo and Sanchez, Vicente eds. Trading in Genes: Development Perspectives on Biotechnology, Trade and Sustainability. Earthscan, pp. 77–88.

Ghosh, Paheli; Sundaram, Senthilarasu; Nixon, Tony P. and Krishnamurthy, Satheesh (2022). Influence of Nanostructures in Perovskite Solar Cells. In: Olabi, Abdul-Ghani ed. Encyclopedia of Smart Materials, Volume 2. Elsevier, pp. 646–660.

Ghosh, P.; Sundaram, S.; Nixon, T. and Krishnamurthy, S. (2016). Influence of Nanostructures in Perovskite Solar Cells. In: Hashmi, M.S.J. ed. Reference Module in Materials Science and Materials Engineering. Elsevier.

Gladding, T.L. (2002). Health risks of materials recycling facilities. In: Hester, R.E. and Harrison, R.M. eds. Environmental and health impact of solid waste management activities. Issues in environmental science and technology (18). Cambridge, UK: Royal Society of Chemistry, pp. 53–72.

Gleed, Fiona; Booth, Colin A.; Silva, Quésia D.; Santana, Ricardo G. and Melo, Silas N. (2024). Home owner/occupant property flood protection. In: Ahadzie, Divine Kwaku; Proverbs, David; Soetanto, Robby and Oladokun, Victor Oluwasina eds. Handbook of Flood Risk Management and Community Action: An International Perspective. Abingdon, Oxon, UK: Routledge, pp. 115–128.

Godley, A.R.; Muller, W.; Frederickson, J. and Barker, H. (2005). Comparison of the SRI and DR4 biodegradation test methods for assessing the biodegradability of untreated and MBT treated municipal solid waste. In: Kühle-Weidemeier, Matthias ed. International Symposium MBT 2005/Internationale Tagung MBA 2005. Germany: Cuvillier Verlag, pp. 548–559.

Green, Catherine; Sobers, Shawn; Zamenopoulos, Theodore; Chapain, Caroline and Turner, Jerome (2016). Conversations about co-production. In: Hargreaves, Ian and Hartley, John eds. The creative citizen unbound: How social media and DIY culture contribute to democracy, communities and the creative economy. Bristol: Policy Press, pp. 153–181.

Griffiths, J.; Oliver, E. C.; Fitzpatrick, M. E.; Finlayson, T.; Viano, D. and Wang, Q. (2007). The fracture strength of Si particles in tensile specimens of Sr-modified A356 castings. In: Crepeau, Paul N.; Tiryakioğlu, Murat and Campbell, John eds. Shape Casting: 2nd International Symposium. Warrendale, PA: TMS (The Minerals, Metals and Materials Society), pp. 127–134.

Grzegorczyk, Malgorzata; Lotfian, Pantea and Nuttall, William J. (2021). Parallels Between the Future for MedTech and Agri-Tech, Perspectives Drawing on the British Experience. In: Koukios, Emmanuel and Sacio-Szymanska, Anna eds. Bio#Futures Foreseeing and Exploring the Bioeconomy. Switzerland: Springer, pp. 229–247.

Gürsoy, Benay; Jowers, Iestyn and Özkar, Mine (2015). Formal descriptions of material manipulations: an exploration with cuts and shadows. In: Celani, Gabriela; Sperling, David Moreno and Franco, Juarez Moara Santos eds. Computer-Aided Architectural Design Futures. The Next City - New Technologies and the Future of the Built Environment. Communications in Computer and Information Science (527). Springer, pp. 439–457.

Hale, Veronica (2018). Good Places Through Community-Led Design. In: Zaman, Quazi Mahtab and Troiani, Igea eds. Transdisciplinary Urbanism and Culture. The Urban Book Series. Springer, Cham, pp. 155–164.

Hales, David (2010). Mix, chain and replicate: methodologies for agent-based modelling of social systems. In: Mollona, Edoardo ed. Computational Analysis of Firms’ Organization and Strategic Behaviour. Routledge Research in Strategic Management. Abingdon, UK and New York, USA: Routledge, pp. 106–122.

Hales, David (2010). Rationality meets the tribe: recent models of cultural group selection. In: Mollona, Edoardo ed. Computational Analysis of Firms’ Organization and Strategic Behaviour. Routledge Research in Strategic Management. Abingdon, UK and New York, USA: Routledge, pp. 231–246.

Harrison, Colin and Johnson, Jeffrey (2018). Autonomous decentralised systems and society. In: Mori, Kinji and Kunifuji, Takashi eds. Autonomous Decentralized Systems and their Applications in Transport and Infrastructure. The Institution of Engineering and Technology, pp. 215–234.

Harte, David; Dovey, John; Aguista, Emma and Zamenopoulos, Theodore (2016). From networks to complexity: two case studies. In: Hargreaves, Ian and Hartley, John eds. The creative citizen unbound: How social media and DIY culture contribute to democracy, communities and the creative economy. Bristol: Policy Press, pp. 129–152.

Heffron, Raphael J. and Nuttall, William J. (2017). Scotland, Nuclear Energy Policy and Independence. In: Wood, Geoffrey and Baker, Keith eds. A Critical Review of Scottish Renewable and Low Carbon Energy Policy. Energy, Climate and the Environment. Cham, Switzerland: Palgrave Macmillan, pp. 103–126.

High, Chris; Singh, Namita; Petheram, Lisa and Nemes, Gusztáv (2012). Defining participatory video from practice. In: Milne, E-J; Mitchell, Claudia and de Lange, Naydene eds. The Handbook of Participatory Video. Lanham, MD, USA: AltaMira Press.

High, Chris; Slater, Rachel and Rengasamy, S. (2007). Are shadows dark?: Governance, informal institutions and corruption in rural India. In: Cheshire, Lynda; Higgins, Vaughan and Lawrence, Geoffrey eds. Rural Governance: International Perspectives. Routledge Studies in Human Geography. Abingdon, UK: Routledge.

Hilton, Clive (2019). Re-thinking learning spaces to foster collaboration between Chinese and Western students. In: Simmons, Claire ed. Teaching and Learning Excellence - The Coventry Way. Coventry University Group, pp. 77–80.

Holden, Georgy (2010). Case study: sharing images, creating communities. In: Kear, Karen ed. Online and Social Networking Communities: A Best Practice Guide for Educators. The Open and Flexible Learning Series. Abingdon: Routledge.

Horrocks, Ivan (1997). Community Information Systems and Process Reengineering: evidence from a case study. In: Snellen, I.Th.M; Taylor, J.A. and Zuurmond, A eds. Beyond BPR in Public Administration. Informatization Developments and the Public Sector (5). Amsterdam: IOS Press.

Horrocks, Ivan and Pratchett, Lawrence (1995). Electronic democracy: Themes and issues. In: Lovenduski, J. and Stanyer, J. eds. Contemporary Political Studies 1995: Proceedings of the Annual Conference of the Political Studies Association of the UK, Volume 3. Belfast: Political Studies Association, pp. 1218–1226.

Horrocks, Ivan and Zouridis, Stavros (1996). Electronic Public Information Systems: designations on an information superhighway? In: Bekkers, V.J.; Koops, B-J and Nouwt, S eds. Emerging Electronic Highways: new challenges for politics and law. Law and Electronic Commerce. The Hague: Kluwer Law International, pp. 55–70.

Huzair, Farah (2011). Coping Strategies and System Adaptation of Agricultural Biotechnology Research in Hungary. In: Robbins, Peter T. and Huzair, Farah eds. Exploring Central and Eastern Europe's Biotechnology Landscape. The International Library of Ethics, Law and Technology (9). Dordrecht: Springer, pp. 157–176.

Huzair, Farah and Robbins, Peter (2011). Human life science and agricultural biotechnology in transition: an introduction. In: Robbins, Peter and Huzair, Farah eds. Exploring Central and Eastern Europe's Biotechnology Landscape. The International Library of Ethics, Law and Technology, 9. Dordrecht: Springer, pp. 1–11.

Ibarra-Yunez, Alejandro; Nuttall, William; Gibson, David and Trzmielak, Dariusz (2019). Conclusions. In: Nuttall, William J; Gibson, David V; Trzmielak, Dariusz and Ibarra-Yunez, Alejandro eds. Energy and Mobility in Smart Cities. ICE Publishing, pp. 231–235.

Iravani, Pejman (2006). Discovering relevant sensor data by Q-analysis. In: Bredenfeld, A.; Jacoff, A.; Noda, I. and Takahashi, Y. eds. RoboCup 2005: Robot Soccer World Cup IX, Volume 4020. Berlin: Springer, pp. 81–92.

Isaksson, Ola; Wynn, David and Eckert, Claudia (2022). Design perspectives, theories and processes for engineering systems design. In: Maier, Anja; Oehmen, Josef and Vermaas, Pieter eds. Handbook of Engineering Systems Design. Springer, pp. 53–99.

Jarratt, T.; Eckert, C. and Clarkson, P. J. (2006). Pitfalls of engineering change: change practice during complex product design. In: ElMaraghy, Hoda A. and ElMaraghy, Waguih H. eds. Advances in Design. Springer Series in Advanced Manufacturing. London: Springer, pp. 413–423.

Jarratt, T. A. W.; Eckert, C. M. and Clarkson, P. J. (2004). The benefits of predicting change in complex products: application areas of a DSM-based prediction tool. In: Marjanović, D. ed. Proceedings of Design 2004. Glasgow, UK: The Design Society.

Jarratt, Timothy; Clarkson, John and Eckert, Claudia (2005). Engineering Change. In: Clarkson, John and Eckert, Claudia eds. Design Process Improvement: A review of current practice. London, UK: Springer, pp. 262–285.

Johnson, Jeffrey H. (2016). Embracing n-ary Relations in Network Science. In: Wierzbicki, Adam; Brandes, Ulrik; Schweitzer, Frank and Pedreschi, Dino eds. Advances in Network Science: 12th International Conference and School, NetSci-X 2016, Wroclaw, Poland, January 11-13, 2016, Proceedings. Lecture Notes in Computer Science (9564). Switzerland: Springer, pp. 147–160.

Johnson, Jeffrey (2009). Embracing design in complexity. In: Alexiou, Aikaterini; Johnson, Jeffrey and Zamenopoulos, Theodore eds. Embracing complexity in design. Abingdon: Routledge, pp. 193–203.

Johnson, Jeffrey (2015). Policy Design, Planning, and Management in Global Systems Science. In: Cardin, Michel-Alexandre; Krob, Daniel; Pao, Chuen Lui; Yang, How Tan and Wood, Kristin eds. Complex Systems Design & Management Asia. Designing Smart Cities: Proceedings of the First Asia - Pacific Conference on Complex Systems Design & Management, CSD&M Asia 2014. Springer, pp. 125–132.

Johnson, Jeffrey (2012). Cities: systems of systems of systems. In: Portugali, Juval; Meyer, Han; Stolk, Egbert and Tan, Ekim eds. Complexity Theories of Cities Have Come of Age. Springer Complexity. Berlin: Springer-Verlag, pp. 153–172.

Johnson, Jeffrey; Alexiou, Katerina; Creigh-Tyte, Anne; Chase, Scott; Duffy, Alex; Eckert, Claudia; Gascoigne, Damian; Kumar, Bimal; Mitleton-Kelly, Eve; Petry, Michael; Qin, Sheng Fen; Robertson, Alec; Rzevski, George; Teymour, Necdet; Thompson, Avril; Young, Robert; Willis, Mateo and Zamenopoulos, Theodore (2007). Embracing complexity in design. In: Inns, Tom ed. Designing for the 21st Century: Interdisciplinary Questions and Insights. Aldershot: Gower Publishing Limited, pp. 129–149.

Johnson, Jeffrey and Cook, Matthew (2013). Policy design: a new area of design research and practice. In: Aiguier, Marc; Boulanger, Frédéric; Krob, Daniel and Clotilde, Marchal eds. Complex Systems in Design and Management. Heidelberg: Springer, pp. 51–62.

Johnson, Jeffrey; Fortune, Joyce and Bromley, Jane (2018). Multilevel systems and policy. In: Mitleton-Kelly, Eve; Paraskevas, Alexandros and Day, Christopher eds. Handbook of Research Methods in Complexity Science: Theory and Applications. Cheltenham, UK: Edward Elgar Publishing Ltd, pp. 363–387.

Johnson, Jeffrey; Fortune, Joyce and Bromley, Jane M. (2017). Systems, Networks and Policy. In: Johnson, Jeffrey; Nowak, Andrzej; Ormerod, Paul; Rosewell, Bridget and Zhang, Yi-Chang eds. Non-Equilibrium Social Science and Policy: Introduction and Essays on New and Changing Paradigms in Socio-Economic Thinking. Understanding Complex Systems. Cham, Switzerland: Springer, pp. 111–134.

Johnson, Jeffrey; Ormerod, Paul; Nowak, Andrzej; Rosewell, Bridget and Zhang, Yi-Cheng (2017). Non-Equilibrium Social Science and Policy. In: Johnson, Jeffrey; Nowak, Andrzej; Ormerod, Paul; Rosewell, Bridget and Zhang, Y-Cheng eds. Non-Equilibrium Social Science and Policy: Introduction and Essays on New and Changing Paradigms in Socio-Economic Thinking. Understanding Complexity. Cham, Switzerland: Springer, pp. 1–17.

Johnson, Jeffrey and Price, Blaine A. (2004). Complexity science and representation in robot soccer. In: Polani, Daniel; Browning, Brett; Bonarini, Andrea and Yoshida, Kazuo eds. RoboCup 2003: Robot Soccer World Cup VII. Lecture Notes in Computer Science, 3020. Berlin: Springer, pp. 67–76.

Jones, Derek (2023). Blending Boundaries: Design and Technology. In: Lehtonen, Miikka J.; Kauppinen, Tomi and Sivula, Laura eds. Design Education Across Disciplines: Transformative Learning Experiences for the 21st Century. Palgrave Macmillan Cham, pp. 173–183.

Jones, Derek (2013). An alternative (to) reality. In: Childs, Mark and Peachey, Anna eds. Understanding Learning in Virtual Worlds. Human–Computer Interaction Series. London: Springer London, pp. 1–20.

Jowers, Iestyn; Clarke, Daniel John and Moat, Richard J (2024). Square-based honeycombs: a study of shape and performance. In: Gero, John ed. Design Computing and Cognition’24. Springer.

Jowers, Iestyn and Earl, Chris (2018). Visual Structures of Embedded Shapes. In: Lee, Ji-Hyun ed. Computational Studies on Cultural Variation and Heredity. KAIST Research Series. Springer, pp. 175–187.

Jowers, Iestyn; Earl, Chris and Stiny, George (2017). Shape computations without compositions. In: Çağdaş, G.; Özkar, M.; Gül, L. F. and Gürer, E. eds. Computer-Aided Architectural Design. Future Trajectories. 17th International Conference, CAAD Futures 2017, Istanbul, Turkey, July 12-14, 2017, Selected Papers. Springer, pp. 348–365.

Jowers, Iestyn; Prats, Miquel; Eissa, Hesham and Lee, Ji-Hyun (2010). A study of emergence in the generation of Islamic geometric patterns’. In: Dave, B.; Li, A. I.; Gu, N. and Park, H.-J. eds. New Frontiers: Proceedings of the 15th International Conference on Computer-Aided Architectural Design Research in Asia CAADRIA 2010. Hong Kong: CAADRIA, pp. 39–48.

Kaplinsky, Raphael and Farooki, Masuma (2010). Global value chains, the crisis, and the shift in markets from the north to the south. In: Cattaneo, Oliver; Gereffi, Gary and Staritz, Cornelia eds. Global Value Chains in a Postcrisis World: A Development Perspective,. Washington DC, USA: World Bank, pp. 125–154.

Keller, R.; Eckert, Claudia and Clarkson, P. J. (2006). Heuristics for change prediction. In: Marjanovic, Dorian ed. Proceedings of the 9th International Design Conference. Glasgow, UK: The Design Society.

Keller, R.; Eckert, Claudia and Clarkson, P. J. (2005). Multiple views to support engineering change management for complex products. In: Roberts, Jonathan C. ed. Third International Conference on Coordinated & Multiple Views in Exploratory Visualization (CMV 2005). Los Alamitos, California: IEEE Computer Society.

Keller, René; Alink, Thomas; Pfeifer, Christian; Eckert, Claudia M.; Clarkson, P. John and Albers, Albert (2007). Product models in design: a combined use of two models to assess change risks. In: Bocquet, J.-C. ed. Proceedings of ICED 2007 (book of abstracts). Glasgow, UK: The Design Society, pp. 673–674.

Keller, René; Eckert, Claudia and Clarkson, P. John (2006). Building connectivity models in design: representations and tools to support cognitive preferences. In: Gero, John S. ed. Design Computing and Cognition '06. Springer, pp. 41–60.

Kilpinen, M. S.; Clarkson, P. J. and Eckert, Claudia (2006). Change impact analysis at the interface of the system design and embedded software disciplines. In: Marjanovic, Dorian ed. Proceedings of the 9th International Design Conference. Glasgow, UK: The Design Society.

Komizo, Yu-ichi; Zhang, Xin Fang and Terasaki, Hidenori (2014). Hybrid system for in situ observation of microstructure evolution in steel materials. In: Kannengiesser, Thomas; Babu, Sudarsanam Suresh; Komizo, Yu-ichi and Ramirez, Antonio J. eds. In situ studies with photons, neutrons and electrons scattering II. Cham: Springer International Publishing Switzerland, pp. 1–26.

Krivtsov, V.; Ahilan, S.; Arthur, S.; Birkinshaw, S.; Dawson, D.; Everett, G.; Glenis, V.; Kapetas, L.; Kilsby, C.; Lamond, J.; Mendoza Tinoco, D.; Ncube, S.; O’Donnell, E.; O’Donnell, G.; Potter, K.; Vilcan, T.; Wright, N. and Thorne, C. (2021). Blue-Green Cities: Achieving Urban Flood Resilience, Water Security, and Biodiversity. In: Brears, R ed. The Palgrave Encyclopedia of Urban and Regional Futures. Palgrave Macmillan, Cham.

Kumar, Ajay; Ramirez, Irwing; Chaudhary, Priyanka; Kumar, Kuldeep; Sharma, Munish and Rana, Rohit (2023). Graphene-Based Photocatalysts for the Elimination of Pollutants in Water. In: Kumar, Neerj; Gusain, Rashi and Sinha-Ray, Suprakas eds. Two-Dimensional Materials for Environmental Applications. Springer Series in Materials Science, 332. Springer, pp. 161–177.

Kumar, Ajay; Ramirez, Irwing; Choudhary, Priyanka; Sharma, Lalita; Bhagurkar, Ashutosh; Rana, Rohit and Kumar, Kuldeep (2024). Titanium-Dioxide-Based Photocatalysts for Efficient Hydrogen Production. In: Kumar, Ashish ed. Towards Sustainable and Green Hydrogen Production by Photocatalysis: Insights into Design and Development of Efficient Materials. ACS Symposium Series, Vol. 1468, 2. American Chemical Society, pp. 255–277.

Lane, Andy and Reynolds, Martin (2017). Systems thinking in practice: mapping complexity. In: Oreszczyn, Sue and Lane, Andy eds. Mapping environmental sustainability: reflecting on systemic practices for participatory research. Bristol: Policy Press, pp. 17–44.

Lane, Andy; Slater, Rachel and Oreszczyn, Sue (2017). Mapping muck: stakeholders' views on organic waste. In: Oreszczyn, Sue and Lane, Andy eds. Mapping environmental sustainability: reflecting on systemic practices for participatory research. Bristol: Policy Press, pp. 129–154.

Langlois, Adele (2007). Crossing Places in Bioethics Regulation: Kenya and Beyond. In: Baker, Charlotte and Norridge, Zoë eds. Crossing Places: New Research in African Studies. Newcastle. UK: Cambridge Scholars Publishing, pp. 114–127.

Lewis, P. R. and Fitzpatrick, M. E. (2006). Intellectual Property Topics in Open University Distance-Taught Courses. In: Doyle, S. and Mannis, A. eds. Proceedings of the International Conference on Innovation, Good Practice and Research in Engineering Education 2006. UK: Higher Education Academy, pp. 507–511.

Lloyd, Peter (2009). Ethical imagination and design. In: Mcdonnell, Janet and Lloyd, Peter eds. About: Designing - Analysing Design Meetings. Abingdon: Taylor & Francis, pp. 85–100.

Lloyd, Peter and Busby, Jerry (2010). Softening up the facts: engineers in design meetings. In: Buchanan, Richard; Doordan, Dennis and Margolin, Victor eds. The Designed World: Images, Objects, Environments. Berg Publishers, pp. 247–259.

Lloyd, Peter and McDonnell, Janet (2009). Introduction to about: designing - analysing design meetings. In: McDonnell, Janet and Lloyd, Peter eds. About: Designing - Analysing Design Meetings. Taylor and Francis Group.

Lloyd, Peter and Snelders, Dirk (2010). What was Phillippe Starck thinking of? In: Lees-Maffei, Grace and Houze, Rebecca eds. The Design History Reader. Berg, pp. 200–206.

Lotz, Nicole and Jones, Derek (2014). Just breathe. In: Williams, Alison; Jones, Derek and Robertson, Judy eds. BITE: Recipes for Remarkable Research. Rotterdam: Sense Publishers, pp. 144–145.

Lucas-Smith, Anthony (2002). Control and embedded intelligence. In: Wiese, Paul and John, Phillip eds. Engineering design in the multi-discipline era: a systems approach. UK: Professional Engineering Publishing Limited, pp. 67–83.

Luck, Rachael (2024). Foundational theory and methodological positioning at the outset of a design research project. In: Rogers, Paul A. and Yee, Joyce eds. The Routledge Companion to Design Research (Second edition). Routledge Art History and Visual Studies Companions. London: Routledge, pp. 141–150.

Luck, R. (2005). Design guidance sources. In: Bright, K. ed. Disability: making buildings accessible special report. 3rd edition. Workplace Law Network, pp. 121–127.

Luck, R. (2009). 'Does this compromise your design?' socially producing a design concept in Talk-in-Interaction. In: McDonnell, J. and Lloyd, P. eds. About designing: analysing design meetings. London: Taylor & Francis, pp. 233–250.

Luck, Rachael (2016). What is it about space that is important in interaction? … Let’s take the world from a situated point of view. In: Dalton, Nicholas S.; Schnädelbach, Holger; Wiberg, Mikael and Varoudis, Tasos eds. Architecture and Interaction: Human Computer Interaction in Space and Place. Human - Computer Interaction Series. Springer, pp. 37–52.

Luck, Rachael (2015). Towards the formulation of a research question: guidance through the glass bead game of research design. In: Rogers, Paul and Yee, Joyce eds. Routledge Companion to Design Research. Abingdon: Routledge, pp. 142–150.

Luck, Rachael and Ewart, Ian (2012). Towards a living future of calm. In: Rogers, P ed. Articulating Design Thinking. Faringdon, UK: Libri, pp. 89–106.

Luck, Rahael; Haenlein, Hans and Bright, Keith T. (2001). Project briefing for an inclusive universal design process. In: Preiser, Wolfgang F. E. and Ostroff, Elaine eds. Universal Design Handbook. New York: McGraw-Hill Professional, pp. 4441–4449.

Mabon, Leslie (2022). Governing the Urban Climate in Fukuoka City, Japan: What Can a Policy Narrative Approach Teach Us? In: Miyauchi, Taisuke and Fukunaga, Mayumi eds. Adaptive Participatory Environmental Governance in Japan. Tokyo: Springer Nature Singapore, pp. 305–319.

Mabon, Leslie and Kawabe, Midori (2021). Fighting against harmful rumours, or for fisheries?: Evaluating framings and narrations of risk governance in marine radiation after the Fukushima nuclear accident. In: Cortesi, Luisa and Joy, K. J. eds. Spilt Waters. The Idea ofd Water Conflicts. Routledge India, pp. 51–68.

Mabon, Leslie and Shih, Wan-Yu (2017). Getting Buy-In for Climate Change Adaptation Through Urban Planning: Climate Change Communication as a Multi-way Process. In: Leal, W.; Azeiteiro, U.; Manolas, E. and Azul, A. M. eds. Handbook of Climate Change Communication: Vol. 1. Climate Change Management. Cham: Springer, pp. 61–75.

Maier, A. M.; Eckert, Claudia and Clarkson, P. J. (2005). Auditing communication in design: a maturity grid-inspired approach. In: Shen, Weiming ed. Proceedings of the Ninth International Conference on Computer Supported Cooperative Work in Design. Coventry, UK: Coventry University.

Mann, Phebe and Garner, Steven (2006). The Role of Sketches in Supporting Near-Synchronous Remote Communication in Computer Supported Collaborative Design. In: Shen, Weiming; Chao, Kuo-Ming; Lin, Zongkai; Barthes, Jean-Paul A and James, Anne eds. Computer Supported Cooperative Work in Design II: 9th International Conference. Lecture Notes in Computer Science, 3865 (3865). Heidelberg: Springer, pp. 72–81.

Martin, Keith (2000). Performance of a novel configuration of journal bearing. In: Maw, S. and Parkins, D.W. eds. Fluid Film Bearings - Recent Advances in Design and Performance. I MechE Seminar Publication (S651). London, UK: Professional Engineering Publishing Ltd for IMechE, p. 43.

Martin, Keith (2013). Hydrostatic journal bearings. In: Wang, Q. Jane and Chung, Yip-Wah eds. Encyclopedia of Tribology, Volume 3. New York, USA: Springer Science & Business Media, pp. 1774–1780.

Martin, Keith (2002). Improvements in efficiency, accuracy and stability using a novel fluid film bearing. In: Winkle, P. ed. Power Generation Retrofitting: Optimizing Power Plant Performance. Bury St. Edmonds, UK: John Wiley and Sons, pp. 85–93.

McKay, Alison; Chase, Scott; Garner, Steven; Jowers, Iestyn; Prats, Miquel; Hogg, David; Chau, Hau Hing; de Pennington, Alan; Earl, Christopher and Lim, Sungwoo (2010). Design synthesis and shape generation. In: Inns, Tom ed. Designing for the 21st Century, Volume 2. Ashgate Publishing Ltd, pp. 304–321.

McKay, Alison; Jowers, Iestyn; Chau, Hau Hing; De Pennington, Alan and Hogg, David C. (2008). Computer aided design: an early shape synthesis system. In: Yan, Xiu-Tian; Eynard, Benoit and Ion, William J. eds. Global Design to Gain a Competitive Edge: An Holistic and Collaborative Design Approach based on Computational Tools. London: Springer, pp. 3–12.

McMillan, Elizabeth (2005). Encouraging strategic change by using complexity based principles: a case study of the Open University. In: Richardson, K. ed. Managing Organizational Complexity: Philosophy, Theory and Application. Managing the Complex. USA: Information Age Publishing, pp. 505–519.

Mehrban, N. and Bowen, J. (2016). Monitoring biomineralization of biomaterials in vivo. In: Narayan, Roger J. ed. Monitoring and Evaluation of Biomaterials and their Performance In Vivo. Woodhead Publishing Series in Biomaterials. Elsevier, pp. 81–110.

Metzler, Torsten; Jowers, Iestyn; Kain, Andreas and Lindemann, Udo (2013). Development of cognitive products via interpretation of system boundaries. In: Chakrabarti, Amaresh and Prakash, Raghu V. eds. ICoRD'13: Global Product Development. Lecture Notes in Mechanical Engineering. New Delhi: Springer India, pp. 163–174.

Midgley, Gerald and Reynolds, Martin (2004). Community and Environmental OR: Towards a New Agenda. In: Midgley, Gerald and Ochoa-Arias, Alejandro eds. Community Operational Research. Contemporary Systems Thinking. Boston, USA: Springer, pp. 297–316.

Mistry, Jayalaxshmi; Berardi, Andrea; Bignante, Elisa; Jafferally, Deirdre; Nuzzo, Claudia; Albert, Grace; Xavier, Rebecca; Robertson, Bernie; Haynes, Lakeram and Benjamin, Ryan (2021). The lasting impact of peer research with Indigenous communities of Guyana, South America. In: Bell, Stephen; Aggleton, Peter and Gibson, Ally eds. Peer Research in Health and Social Development: International Perspectives on Participatory Research. Routledge, pp. 246–260.

Mistry, Jayalaxshmi and Berardi, Andrea (2006). Introduction. In: Mistry, Jayalaxshmi and Berardi, Andrea eds. Savannas and dry forests: linking people with nature. UK: Ashgate, pp. 1–18.

Moore, Anne-Marie (2010). Graphic Design [CV Example]. In: Cole, Jan ed. Creative CV Guide (2nd Revised Edition). University College Falmouth, pp. 22–23.

Morales, Andrés; Spear, Roger; Ngoasong, Michael and Sacchetti, Silvia (2019). Buen Vivir as an Innovative Development Model. In: Banerjee, Swati; Carney, Stephen and Hulgard, Lars eds. People-Centered Social Innovation: Global Perspectives on an Emerging Paradigm. New York: Routledge.

Morris, Carol and Goodyear, Alec (2017). Case Study 16: Transforming assessment practices in undergraduate engineering for distance-learning students. In: Elkington, Sam and Evans, Carol eds. Transforming Assessment in Higher Education: A Case Study Series. UK: Higher Education Academy, pp. 94–98.

Morris, Carol and Goodyear, Alec (2018). Implementing programme reform through a radical change in assessment practice. In: Lawrence, Jenny and Ellis, Sam eds. Supporting programme leaders and programme leadership. SEDA Specials (39). London: SEDA.

Moss, Nicky; Seaton, Richard; Smith, Andrew and Williams, Keith (2013). Development of a vendor practice-based distance based learning programme. In: Gibbins, Lynda and Perkins, Glynis eds. Laboratories for the 21st Century in STEM Higher Education: A Compendium of Current UK Practice and an Insight into Future Directions for Laboratory-Based Teaching and Learning. Loughborough: Centre for Engineering and Design Education, Loughborough University, pp. 85–90.

Mugwagwa, Julius; Hanlin, Rebecca; Chataway, Jo and Muraguri, Lois (2013). The Role of the Product Development Partnership as a Translational Mechanism for Delivering Health Solutions in Low-Resource Settings. In: Mittra, James and Milne, Christopher-Paul eds. Translational Medicine: The Future of Therapy. Pan Stanford Publishing Pte. Ltd, pp. 233–256.

Muir Wood, A. P.; Moultrie, J. and Eckert, C. M. (2010). Product form evolution. In: Silva, A. and Simoes, R. eds. Handbook of Research on Trends in Product Design and Development: Technological and Organizational Perspectives. Hershey, PA: Business Science Reference.

Mulyadi, M.; Rist, M.; Edwards, L.; Brooks, J. W. and Wilson, A. F. (2007). A hot deformation model for two-phase titanium alloys based on an internal state-variable approach. In: Niinomi, M.; Akiyama, S.; Ikeda, M.; Hagiwara, M. and Maruyama, K. eds. Ti-2007 Science and Technology, Volume 1. Sendai, Japan: The Japan Institute of Metals, pp. 315–318.

Murphy, Joseph and Chataway, Joanna (2005). The challenges of policy integration from an international perspective: the case of GMOs. In: Lyall, Catherine and Tait, Joyce eds. New modes of governance: developing an integrated policy approach to science, technology, risk and the environment. UK: Ashgate, pp. 159–177.

Neighbour, G. B. (2010). Plant life management (PLiM) practices for gas-cooled, graphite-moderated nuclear reactors: UK experience. In: Tipping, Philip G. ed. Understanding and Mitigating Ageing in Nuclear Power Plants - Materials and Operational Aspects of Plant Life Management (PLiM). Woodhead Publishing series in Energy. Cambridge: Woodhead Publishing, pp. 838–875.

Nemes, Gustav; High, Chris and Huzair, Farah (2006). Reflexive agency and multi-level governance: mediating integrated rural development in South Transdanubia. In: Cheshire, L.; Higgins, V. and Lawrence, G. eds. Rural Governance: International perspectives. Routledge Studies in Human Geography. London, UK: Routledge, pp. 98–115.

Nold, Christian and Sobecka, Karolina (2021). Aesthetic strategies for engaging with environmental governance. In: Rogers, Hannah Star; Halpern, Megan K.; Hannah, Dehlia and de Ridder-Vignone, Kathryn eds. Routledge Handbook of Art, Science, and Technology Studies. London: Routledge, pp. 91–101.

Nold, C. and Francis, L. (2017). Participatory Sensing: Recruiting Bipedal Platforms or Building Issue-centred Projects? In: Loreto, V. ed. Participatory Sensing, Opinions and Collective Awareness. Springer, pp. 213–235.

Nold, Christian (2016). Metrics of Unrest: Building Social and Technical Networks for Heathrow Noise. In: Callard, Felicity; Staines, Kimberley and Wilkes, James eds. The Restless Compendium: Interdisciplinary Investigations of Rest and Its Opposites. Palgrave Macmillan, pp. 149–156.

Nold, Christian (2005). Legible Mob. In: Latour, Bruno and Weibel, Peter eds. Making Things Public: Atmospheres of Democracy. ZKM Center for Art and Media with the MIT Press, pp. 846–853.

Nold, Christian (2018). Turning Controversies into Questions of Design: Prototyping Alternative Metrics for Heathrow Airport. In: Marres, Noortje; Guggenheim, Michael and Wilkie, Alex eds. Inventing the Social. Manchester, UK: Mattering Press, pp. 94–124.

Nold, Christian (2014). Devices for articulate propositions. In: Thomson, Mike ed. Stressed Out. Design Academy Eindhoven, pp. 34–39.

Nold, Christian (2020). Taxonomy of environmental sensing in smart cities. In: Willis, Katharine S. and Aurigi, Alessandro eds. The Routledge Companion to Smart Cities. Routledge, pp. 254–261.

Northover, Peter; Northover, Shirley; Malamud, Florencia; Kelleher, Joe and James, Jon (2014). Analysis and metallography of copper and brass components from Alum Bay. In: Satchell, Julie and Whitewright, Julian eds. The Maritime Archaeology of Alum Bay: Two shipwrecks on the north-west coast of the Isle of Wight, England. BAR British series (608). Oxford: Archaopress, pp. 48–55.

Northover, S. M. and Northover, J. P. (2012). Applications of Electron Backscatter Diffraction (EBSD) in Archaeology. In: Meeks, Nigel; Cartwright, Caroline; Meek, Andrew and Mongiatti, Aude eds. Historical Technology, Materials and Conservation: SEM and Microanalysis. Archetype Publications, pp. 76–85.

Nuttall, W. J.; Ashley, S. F.; Fenner, R. A.; Krishnani, P. D. and Parks, G. T. (2019). Technology Assessment of Near-Term Open-Cycle Thorium-Fuelled Nuclear Energy Systems. In: Nayak, A. K. and Sehgal, B. R. eds. Thorium - Energy for the Future: Selected Papers from ThEC15. Springer, pp. 117–124.

Nuttall, William (2020). Commercial opportunities for nuclear fusion. In: Nuttall, William; Takeda, Shutaro; Konishi, Satoshi and Webbe-Wood, David eds. Commercialising Fusion Energy - How small businesses are transforming big science. Bristol: Institute of Physics Publishing.

Nuttall, William (2019). Historic European cities and the smart future. In: Nuttall, William J; Gibson, David V; Trzmielak, Dariusz and Ibarra-Yunez, Alejandro eds. Energy and Mobility in Smart Cities. ICE Publishing, pp. 19–29.

Nuttall, William; Bompard, Ettore and Masera, Marcelo (2015). Smart Meters, Grids and Criminality. In: Gibson, David and Slovak, Jan eds. Building Sustainable R&D Centres in Emerging Technology Regions. Brno, Czech Republic: Masaryk University, pp. 131–143.

Nuttall, William; Konishi, Satoshi; Takeda, Shutaro and Webbe-Wood, David (2020). Introduction. In: Nuttall, William; Takeda, Shutaro; Konishi, Satoshi and Webbe-Wood, David eds. Commercialising Fusion Energy - How small businesses are transforming big science. Bristol: Institute of Physics Publishing, pp. 1–6.

Nuttall, William; Konishi, Satoshi; Takeda, Shutaro and Webbe-Wood, David (2020). Conclusions. In: Nuttall, William; Takeda, Shutaro; Konishi, Satoshi and Webbe-Wood, David eds. Commercialising Fusion Energy - How small businesses are transforming big science. Bristol: Institute of Physics Publishing.

Nuttall, William and Neighbour, Gareth (2020). Non-power applications - new missions for nuclear energy to be delivered safely and securely. In: Nian, Victor ed. Advanced Security and Safeguarding in the Nuclear Power Industry: State of the Art and Future Challenges. London, UK: Academic Press, pp. 29–47.

Nuttall, William J. and Earp, John E. (2014). Nuclear Energy in the UK: Safety Culture and Industrial Organisation. In: Nam, Ilchong and Rothwell, Geoffrey eds. New Nuclear Power Industry Procurement Market: International Experiences. Research Monographs (2014-01). Sejong-Si, South Korea: Korea Development Institute, pp. 142–183.

O'Donovan, B. D.; Eckert, Claudia and Clarkson, P. J. (2004). Simulating design processes to assist in design process planning. In: Design Engineering Division, ASME and Computers and Information in Engineering Division, ASME eds. 2004 Proceedings of Design Engineering Technical Conference & Computers & Information Engineering Conference: Vol 3. 16th International Conference on Design Theory and Methodology. New York: American Society of Mechanical Engineers.

O'Donovan, Brendan; Eckert, Claudia; Clarkson, John and Browning, Tyson R. (2005). Design planning and modelling. In: Clarkson, John and Eckert, Claudia eds. Design Process Improvement: A Review of Current Practice. London: Springer, pp. 60–87.

Olalere, Folasayo (2018). Rapid product development and application in ceramics production. In: Khosrow-Pour, Mehdi ed. Enhancing Art, Culture, and Design With Technological Integration. IGI Global, pp. 215–233.

Olalere, Folasayo and Makwela, Mashaole (2024). Dancing with Decolonial Curriculum Theorists: Technology as a Shapeshifter in Art and Design Education. In: Fomunyam, Kehdinga ed. Theorising Curriculum in Unsettling Times in African Higher Education. Johannesburg: UJ Press, pp. 291–321.

Oreszczyn, Sue and Lane, Andy (2017). Mapping agri-environmental knowledge systems. In: Oreszczyn, Sue and Lane, Andy eds. Mapping environmental sustainability: reflecting on systemic practices for participatory research. Bristol: Policy Press, pp. 75–102.

Oreszczyn, Sue; Levidow, Les and Wield, Dave (2017). Researching agro-environmental problems with others. In: Oreszczyn, Sue and Lane, Andy eds. Mapping environmental sustainability: reflecting on systemic practices for participatory research. Bristol: Policy Press, pp. 45–74.

Owusu, Alex Barimah; Songsore, Jacob; Shih, Wan-Yu and Mabon, Leslie (2021). Ways of creating usable, multipurpose greenspace in impoverished settlements in cities of the Global South. In: Douglas, Ian; Anderson, PML; Goode, David; Hough, Michael C.; Maddox, David; Nagendra, Harini and Tan, Puay Yok eds. The Routledge Handbook of Urban Ecology 2nd Edition. London: Routledge, pp. 1007–1026.

Paterson, N.T.; Gorham, D. A.; Matela, R.; Moffatt, J. E.; Greasley, A. and Karet, B. (2004). A finite element study of the mechanics of sports mouthguards. In: Hubbard, M.; Mehta, R. D. and Pallis, J. M. eds. The Engineering of Sport 5, Volume 2. UK: International Sports Engineering Assocation, pp. 354–360.

Peake, Stephen (2003). Climate Change: Global Responses Under Uncertainty. In: Blowers, Andrew and Hinchliffe, Stephen eds. Envrironmental Responses. John Wiley & Sons Ltd in association with The Open University, pp. 186–235.

Peake, Stephen (2007). Carbon trading: opportunities and issues. In: Elliott, David ed. Sustainable Energy: Opportunities and limitations. Energy, Climate and Environment Series. Basingstoke, UK: Palgrave Macmillan, pp. 190–211.

Peake, Stephen (2012). The business of design. In: Garner, Steven and Evans, Chris eds. Design and Designing: A Critical Introduction. London: Berg.

Peake, Stephen (2012). What is a low carbon society? In: Herring, Horace ed. Living in a Low-Carbon Society in 2050. Energy, Climate and the Environment. Basingstoke: Palgrave, pp. 15–27.

Peake, Stephen (1994). Taking a Walk on the Demand Side. In: Hope, Chris and Owens, Susan E. eds. Moving Forward: Overcoming the Obstacles to a Sustainable Transport Policy. Cambridge: White Horse Press.

Peake, Stephen and Everett, Bob (2017). Introducing Renewable Energy. In: Peake, Stephen ed. Renewable Energy: Power for a Sustainable Future. Oxford: Oxford University Press, pp. 1–28.

Peake, Stephen and Everett, Bob (2017). Renewable Energy Futures. In: Peake, Stephen ed. Renewable Energy: Power for a Sustainable Future. Oxford: Oxford University Press, pp. 597–616.

Peake, Stephen; Everett, Bob and Boyle, Godfrey (2012). Introducing Energy Systems and Sustainability. In: Everett, Bob; Boyle, Godfrey; Peake, Stephen and Ramage, Janet eds. Energy Systems and Sustainability: Power for a Sustainable Future (2nd ed.). Oxford: Oxford University Press, pp. 1–34.

Peake, Stephen; Everett, Bob; Boyle, Godfrey and Ramage, Janet (2012). Penalties: assessing the environmental and health impacts of energy use. In: Boyle, Godfrey; Everett, Bob; Peake, Stephen and Ramage, Janet eds. Energy Systems and Sustainability: Power for a Sustainable Future (2nd ed.). Oxford: Oxford University Press, pp. 505–569.

Pearce, Trevor and Fortune, Joyce (2002). Taking account of human rights. In: Ragsdell, G; West, D and Wilby, J eds. Systems theory and practice in the Knowledge Age: Proceedings of the Seventh International Conference of the UK Systems Society, held July 7th to 10th, 2002, at York University, UK. New York: Kluwer Academic/Plenum, pp. 275–282.

Pearson, Richard and Nuttall, William (2020). Pioneers of commercial fusion. In: Nuttall, William; Takeda, Shutaro; Konishi, Satoshi and Webbe-Wood, David eds. Commercialising Fusion Energy - How small businesses are transforming big science. Bristol: Institute of Physics Publishing.

Peters, Geoffrey and Fortune, Joyce (2003). The Formal system paradigm for studying failures. In: Midgley, G. ed. Systems thinking: systems theories and modelling (4 vols). Sage Library in Business and Management, 2. Sage, pp. 383–390.

Plumbridge, William (2003). Mechanical evaluation in electronics. In: Suganama, K. ed. Lead-free soldering in electronics: Science, technology and environmental impact. New York: Marcel Dekker, pp. 183–218.

Potter, Karen (2022). Cementing “Stakeholder Collaboration” into Flood Risk Management. In: Eslamian, Saeid and Eslamian, Faezeh A. eds. Flood Handbook: Principals and Applications. CRC Press, Taylor & Francis Group, pp. 171–192.

Potter, Stephen (2008). Purchase, circulation and fuel taxation. In: Ison, Stephen and Rye, Tom eds. The Implementation and Effectiveness of Transport Demand Management measures: An International Perspective. UK: Ashgate, pp. 13–27.

Potter, Stephen (2009). Using environmental taxation for transport demand management. In: Lye, Lin-Heng; Milne, Janet; Ashiabor, Hope; Deketelaere, Kurt and Kreiser, Larry eds. Critical Issues In Environmental Taxation: International and Comparative Perspectives, Volume VII. Oxford, UK: Oxford University Press, pp. 39–54.

Potter, Stephen and Enoch, Marcus (2021). Travel Plans. In: Vickerman, Roger ed. International Encyclopedia of Transportation. Elsevier, pp. 408–412.

Potter, Stephen; Warren, James; Valdez, Miguel and Cook, Matthew (2023). Toward an intelligent mobility regime. In: Droege, Peter ed. Intelligent Environments: advanced systems for a healthy planet, 2nd Edition. Amsterdam: Elsevier, pp. 323–350.

Potter, Karen (2012). Finding "Space for Water": crossing concrete policy thresholds in England. In: Warner, Jeroen Frank; Van Buuren, Arwin and Edelenbos, Jurian eds. Making Space for the River: Governance Experiences with Multifunctional River Flood Management in the US and Europe. London: IWA Publishing, pp. 89–101.

Potter, Stephen (2012). How to write up research. In: Becker, Saul; Bryman, Alan and Ferguson, Harry eds. Understanding Research for Social Policy and Social Work. Bristol: The Policy Press, pp. 367–372.

Potter, Stephen (1997). Telematics and Transport Policy: Making the Connection. In: Droege, P ed. Intelligent Environments: Spatial Aspects of the Information Revolution. Amsterdam NL and Oxford UK: Elsevier, pp. 199–212.

Potter, Stephen (2003). Transport energy and emissions: urban public transport. In: Hensher, David and Button, Kenneth eds. Handbook of transport and the environment, 4. Handbooks in Transport. Amsterdam, Netherlands: Elsevier, pp. 247–262.

Potter, Stephen (2012). Transport and mobility choices in 2050. In: Herring, Horace ed. Living in a Low Carbon Society in 2050. Energy, Climate and Environment. Palgrave Macmillan, pp. 60–74.

Potter, Stephen (2013). Transport and energy use. In: Jean-Paul, Rodrique; Notteboom, Theo and Shaw, Jon eds. The Sage Handbook of Transport Studies. London: Sage.

Potter, Stephen (2009). Using environmental taxation for transport demand management. In: Lye, Lin-Heng; Milne, Janet E.; Ashiabor, Hope; Deketelaere, Kurt and Kreiser, Larry eds. Critical Issues in Environmental Taxation: International and Comparative Perspectives. Critical Issues in Environmental Taxation, 7. Oxford: Oxford University Press, pp. 39–54.

Potter, Stephen (2012). Transport interchanges and the integration design challenge. In: Tovey, Michael ed. Design for Transport: A User-Centered Approach to Vehicle Design and Travel. Design for Social Responsibility. Farnham, UK: Gower, pp. 121–136.

Potter, Stephen (2012). Transport planning. In: Tovey, Mike ed. Design for Transport: A User-Centered Approach to Vehicle Design and Travel. Design for Social Responsibility. Farnham, UK: Gower, pp. 107–120.

Potter, Stephen and Bailey, Iain (2008). Transport and the Environment. In: Knowles, Richard; Shaw, Jon and Docherty, Iain eds. Transport Geographies. Oxford, UK: Blackwell Publishing, pp. 29–48.

Potter, Stephen and Enoch, Marcus (2001). Local transport subsidies and affordable fares: international comparisons. In: Greyling, Anthony ed. Any more fares?: Delivering better bus services. London: Institute of Public Policy Research, pp. 77–91.

Potter, Stephen and Enoch, Marcus (2016). Paratransit: the need for a regulatory revolution in the light of institutional inertia. In: Mulley, Corinne and Nelson, John eds. Paratransit: shaping the flexible transport future. Transport and Sustainability (8). Bingley: Emerald, pp. 15–34.

Potter, Stephen; Parkhurst, Graham and Lane, Ben (2005). European perspectives on a new fiscal framework for transport. In: Reggiani, Aura and Schintler, Laurie A. eds. Methods and models in transport and telecommunications: Cross-Atlantic perspectives. Advances in spatial science. New York, USA: Springer, pp. 319–333.

Potter, Stephen and Rye, Tom (2003). Economic instruments and traffic restraint. In: Hine, J and Preston, J eds. Integrated futures and transport choices: UK transport policy beyond the 1998 White Paper and Transport Acts. Transport and Society. Aldershot, UK: Ashgate, pp. 287–304.

Potter, Stephen and Subrahumanian, Ramya (2007). Information needs and policy change. In: Thomas, Alan and Mohan, Giles eds. Research Skills for Policy and Development: How to Find Out Fas. London: Sage, pp. 27–48.

Potter, Stephen and Thomas, Ray (1980). What is a new town for? In: Leaker, Dudley and Leons, Jon eds. New Towns in National Development. Milton Keynes: International Federation for Housing and Planning, pp. 41–48.

Potter, Stephen; Valdez, Alan-Miguel and Cook, Matthew (2019). Autonomous vehicles and the urban mobility ecosystem. In: Nuttall, William J; Gibson, David V; Trzmielak, Dariusz and Ibarra-Yunez, Alejandro eds. Energy and Mobility in Smart Cities. ICE Publishing, pp. 83–97.

Prats, Miquel and Earl, C.F. (2006). Exploration through drawings in the conceptual stages of product design. In: Gero, J. ed. Design Computing and Cognition. Springer, pp. 83–102.

Qin, Rongshan (2020). Artificial intelligence and new materials. In: Guo, Yike ed. Artificial intelligence and development of future society. Beijing: Scientific and Technical documentation Press, pp. 305–314.

Ramirez, Irwing; Mariam, Ezrah; Kumar, Ajay; Yanardağ, Duygu; Villaseñor-Basulto, Déborah L.; Garcia-Huante, Yolanda G.; Ordaz, Alberto; Kum, Soyoon and Rowles, Lewis S. (2024). Advanced oxidation processes for degradation of pharmaceuticals used during COVID-19 pandemic. In: Dehghani, Mohammad Hadi; Karri, Rama Rao and Tyagi, Inderjeet eds. Sustainable Technologies for Remediation of Emerging Pollutants from Aqueous Environment. Elsevier, pp. 337–362.

Reynolds, Martin and Williams, Bob (2012). Systems thinking and Equity-focused evaluations. In: Segone, Marco and Bamberger, Michael eds. Evaluation for equitable development results. New York: UNICEF, pp. 115–141.

Reynolds, M.; Blackmore, C.; Ison, R.; Shah, R. and Wedlock, E. (2017). The role of systems thinking in the practice of implementing sustainable development goals. In: Leal Filho, Walter ed. Handbook of Sustainability Science and Research. Springer, pp. 677–698.

Reynolds, M. and Holwell, S. (2020) 'Chapter 1: Introducing systems approaches'. Systems approaches to making change: a practical guide 2nd Edn. pp. 1-24. London: Open University and Springer

Reynolds, M.; Lyons-White, J. and Knight, A. T. (2020). Systemic failure and the ‘Iron Triangle’ of conservation practice. In: Wyborn, Carina ed. Seeds of Change: Provocations for a new research agenda. Geneva: Luc Hoffman Institute, pp. 138–142.

Reynolds, Martin (2016). Towards Praxis in Systems Thinking. In: Frank, Moti; Shaked, Haim and Koral-Kordova, Sigal eds. Systems Thinking: Foundation, Uses and Challenges. New York: Nova Science Publishers, pp. 3–33.

Reynolds, Martin (2011). Critical thinking and systems thinking: towards a critical literacy for systems thinking in practice. In: Horvath, Christopher P. and Forte, James M. eds. Critical Thinking. New York, USA: Nova Science Publishers, pp. 37–68.

Reynolds, Martin (2017). Evaluating diagramming as praxis. In: Oreszczyn, Sue and Lane, Andy eds. Mapping Environmental Sustainability: Reflecting on systemic practices for participatory research. University of Bristol: Policy Press, pp. 207–230.

Reynolds, Martin (2015). Communicating about systems and complexity:from contingency to praxis. In: Patton, Michael Quinn ed. Gedenkschrift to honor Brenda Zimmerman's contributions to understanding complexity and social innovation. Canada: Social Innovation Generation de L’innovation sociale, pp. 32–36.

Reynolds, Martin (2001). Co-guarantor attributes: a systemic approach to evaluating expert support. In: Remenyi, D. and Brown, A. eds. Eighth European Conference on Information Technology Evaluation Conference proceedings, Oriel College, Oxford, UK 17-18 September 2001. Reading, UK: MCIL Press, pp. 561–571.

Reynolds, Martin (2009). Introduction to environmental responsibility. In: Reynolds, Martin; Blackmore, Chris and Smith, Mark J. eds. The Environmental Responsibility Reader. London: Zed Books and The Open University, pp. 1–6.

Reynolds, Martin (2009). Environmental ethics. In: Reynolds, Martin; Blackmore, Christine and Smith, Mark J. eds. The Environmental Responsibility Reader. London: Zed Books and The Open University, pp. 40–51.

Reynolds, Martin (2011). Bells that still can ring: systems thinking in practice. In: Tait, Andrew and Richardson, Kurt eds. Moving Forward with Complexity: Proceedings of the 1st International Workshop on Complex Systems Thinking and Real World Applications. Litchfield Park, AZ: Emergent Publications, pp. 327–349.

Reynolds, Martin (2007). Evaluation based on critical systems heuristics. In: Williams, B. and Imam, I. eds. Using Systems Concepts in Evaluation: An Expert Anthology. Point Reyes CA, USA: EdgePress, pp. 101–122.

Reynolds, Martin (2009). Environmental ethics and development. In: Wilson, Gordon; Furniss, Pamela and Kimbowa, Richard eds. Environment, Development, and Sustainability: Perspectives and cases from around the world. Oxford, UK: Oxford University Press, pp. 159–168.

Reynolds, Martin; Blackmore, Chris and Smith, Mark (2009). Epilogue. In: Reynolds, Martin; Blackmore, Christine and Smith, Mark eds. The Environmental Responsibility Reader. Zed Books and The Open University, pp. 341–347.

Reynolds, Martin and Holwell, Sue (2010). Introducing systems approaches. In: Reynolds, Martin and Holwell, Sue eds. Systems Approaches to Managing Change: A Practical Guide. London: Springer, pp. 1–23.

Reynolds, Martin and Holwell, Sue (2010). Epilogue: systems approaches and systems practice. In: Reynolds, Martin and Holwell, Sue eds. Systems Approaches to Managing Change: A Practical Guide. London: Springer, pp. 293–306.

Reynolds, Martin and Holwell, Sue (2020). Chapter 7 Epilogue: Systems Approaches and Systems Practice. In: Reynolds, Martin and Holwell, Sue eds. Systems Approaches to Making Change: A Practical Guide. 2nd Edn. London: Open University and Springer, pp. 307–321.

Reynolds, Martin and Wilding, Helen (2017). Boundary critique: an approach for framing methodological design. In: de Savigny, Don; Blanchet, Karl and Adam, Taghreed eds. Applied Systems Thinking For Health Systems Research: A Methodological Handbook. Maidenhead: Open University Press, pp. 38–56.

Rhodes, Edward (2006). From Supply Chains to Total Product Systems. In: Rhodes, Edward; Warren, James P. and Carter, Ruth eds. Supply Chains and Total Product Systems: A Reader. Oxford, UK: Blackwell Publishing, pp. 8–35.

Rhodes, Ed and Wield, David (1994). Technology, innovation theory and the implementation process. In: Rhodes, Ed and Wield, David eds. Implementing New Technologies: Innovation and the Management of Technology (2nd ed). Oxford: NCC Blackwell, pp. 79–95.

Rist, M.A. and Reed, R.C. (2001). Characterization of superalloy tertiary creep by inverse modeling. In: Zhao, J.C.; Fahrmann, M. and Pollock, T.M. eds. Materials Design Approaches and Experiences. Warrendale, PA, USA: Minerals, Metals and Materials Society, pp. 255–265.

Rist, Martin; Mulyadi, M.; Edwards, Lyndon and Brooks, J.W. (2005). Optimisation and confidence region estimation of constitutive parameters in equations for hot metal deformation. In: Banabic, D. ed. Proceedings of the 8th Esaform Conference on Material Forming, Volume 1. Bucuresti, Romania: The Publishing House of the Romanian Academy, pp. 61–64.

Rist, Martin; Roberts, S.M.; Reed, R.C. and Brooks, J.W. (2002). A state-variable model for the hot deformation of Waspaloy. In: Pietrzyk, M.; Mitura, Z. and Kaczmar, J. eds. The 5th International ESAFORM Conference on Material Forming. Krakow, Poland: Publishing House Akapit, pp. 635–638.

Robbins, Peter and Huzair, Farah (2011). Final remarks. In: Robbins, Peter and Huzair, Farah eds. Exploring Central and Eastern Europe's Biotechnology Landscape. The International Library of Ethics, Law and Technology, 9. Dordrecht: Springer, pp. 201–220.

Robson, Linda (2015). Accessibility Challenges in Mobile Learning. In: Zhang, Yu (Aimee) ed. Handbook of Mobile Teaching and Learning. Springer, pp. 337–350.

Roy, M. J.; Stoyanov, N. and Moat, R. J. (2024). Open Source Contour Method Analysis for Assessing Residual Stress in Weldments. In: Franck, Christian; Kasza, Karen; Estrada, Jon; De Finis, Rosa; Ólafsson, Geir; Gururaja, Suhasini; Furmanski, Jevan; Forster, Aaron; Kolluru, Pavan; Prime, Mike; Berfield, Tom and Aydiner, Cahit eds. Challenges in Mechanics of Biological Systems and Materials, Thermomechanics and Infrared Imaging, Time Dependent Materials and Residual Stress, Volume 2. SEM 2023. Conference Proceedings of the Society for Experimental Mechanics Series ((CPSEMS)). Cham: Springer, pp. 21–29.

Roy, Robin (2012). Case studies in low carbon living. In: Herring, Horace ed. Living in a Low Carbon Society in 2050. Energy, Climate and the Environment. Basingstoke: Palgrave Macmillan, pp. 95–120.

Roy, Robin (2009). Designing for sustainability. In: Wilson, Gordon; Furniss, Pamela and Kimbowa, Richard eds. Environment, Development, and Sustainability: Perspectives and cases from around the world. Oxford, UK: Oxford University Press, pp. 203–212.

Roy, Robin; Caird, Sally and Potter, Stephen (2007). People centred eco-design: consumer adoption of low and zero carbon products and systems. In: Murphy, Joseph ed. Governing Technology for Sustainability. London, UK: Earthscan, pp. 41–62.

Roy, Robin; Potter, Stephen and Yarrow, Karen (2004). Towards sustainable higher education: environmental impacts of conventional campus, print-based and electronic/open learning systems. In: Murphy, D; Carr, R; Taylor, J. and Wong, T.M eds. Distance Education & Technology: Issues and Practice. Hong Kong: Open University of Hong Kong Press, pp. 129–145.

Roy, Robin and Tovey, Michael (2012). Bicycle design: creativity and innovation. In: Tovey, Michael ed. Design for Transport: A User-Centred Approach to Vehicle Design and Travel. Farnham UK: Gower, pp. 167–200.

Schadewitz, Nicole (2009). Innovative collaborative design in international interaction design summer schools. In: Poggenpohl, Sharon and Sato, Keiichi eds. Design Integrations: Research and Collaboration. UK: Intellect, pp. 230–250.

Schøtt, Thomas; Spear, Roger and Hulgaard, Lars (2009). Organising social enterprises in Denmark. In: Schøtt, Thomas ed. Social and commercial entrepreneurship in Denmark 2009. Syddansk Universitet, pp. 111–124.

Shih, Wan-Yu and Mabon, Leslie (2021). Green Infrastructure as a Planning Response to Urban Warming: A Case Study of Taipei Metropolis. In: Ito, Keitaro ed. Urban Biodiversity and Ecological Design for Sustainable Cities. Tokyo: Springer Japan, pp. 335–352.

Slater, Rachel (2007). Local governance of public services: the role of partnerships in sustainable waste management. In: Murphy, Joseph ed. Governing Technology for Sustainability. UK: Earthscan Publications Ltd, pp. 151–167.

Slater, Rachel; Gilbert, J. and Frederickson, James (2002). Review of composting practices in the UK. In: ed. Engineering for Profit from Waste VI. IMechE Conference Transactions. UK: Professional Engineering Publishing.

Spear, Roger (2012). Hybridite des co-operatives. In: Blanc, Jérôme and Colongo, Denis eds. Les contributions des coopératives à une économie plurielle. Les cahiers de l'économie sociale. Entreprendre autrement. Paris: L'Harmattan.

Spear, Roger (2010). Social accounting and social audit in the UK. In: Bouchard, Marie ed. The Worth of the Social Economy : An International Perspective. Économie sociale & Économie publique / Social Economy & Public Economy (2). Group Editorial Peter Lang.

Spear, Roger (2019). Collective social entrepreneurship. In: De Bruin, Anne and Teasdale, Simon eds. A research agenda for social entrepreneurship. Elgar Research Agendas. Edward Elgar.

Spear, Roger (2008). Cogouvernance collective. Partenariats stratégiques locaux au Royaume-Uni.Community co-governance: local strategic partnerships in the UK. In: Enjolras, Bernard ed. Gouvernance et intérêt général dans les services sociaux et de santé. Économie sociale & Économie publique / Social Economy & Public Economy (1). Brussels: Peter Lang Editions, pp. 81–106.

Spear, Roger (2010). Religion and value-driven social entrepreneurship. In: Hockerts, Kai; Mair, Johanna and Robinson, Jeffrey eds. Values and Opportunities in Social Entrepreneurship. Houndmills, Basingstoke: Palgrave.

  • Proof (PDF) This file is not available for public download

Spear, Roger (2009). European perspectives on social enterprise. In: Hunter, Paul ed. Social Enterprise for Public Service: How does the Third Sector Deliver? London: The Smith Institute, pp. 38–49.

Spear, Roger (2009). Social entrepreneurship in co-operatives. In: McPherson, Ian and McLaughlin-Jenkins, Erin eds. Integrating Diversities with a Complex Heritage: Essays in the Field of Co-operative Studies. Victoria, Canada: New Rochdale Press.

Spear, Roger (2010). The social economy in Europe: trends and challenges. In: Mook, Laurie; Quarter, Jack and Ryan, Sherida eds. Researching the Social Economy Matters. Toronto: University of Toronto Press, pp. 84–105.

Spear, Roger; Andersen, Linda Lundgaard and Schott, Thomas (2009). People’s participation in social entrepreneurship in Denmark. In: Schott, Thomas ed. Social and commercial entrepreneurship in Denmark 2009. Syddansk Universitet, pp. 99–110.

Spear, Roger and Hulgard, Lars (2006). Social entrepreneurship and the mobilisation of social capital in European social enterprises. In: Nyssens, Marthe ed. Social Enterprise: At the crossroads of market, public policies and civil society. Routledge studies in the management of voluntary and non-profit organizations. Oxford, UK: Routledge, pp. 85–108.

Spear, Roger; Paton, Rob and Nicholls, Alex (2015). Public Policy for Social Finance in Context. In: Nicholls, Alex; Paton, Rob and Emerson, Jed eds. Social Finance. Oxford: Oxford University Press, pp. 460–487.

Stavey, M.K.; Eckert, Claudia and Earl, Christopher (2009). From Ronchamp by sledge: on the pragmatics of object references. In: McDonnell, Janet and Lloyd, Peter eds. About designing: analysing design meetings. London: CRC Press, pp. 360–379.

Thomas, Alan; Humphreys, David and Carr, Susan (2001). Influence thrust upon them? NGOs' role in Public Action on the Environment in Africa. In: Thomas, Alan; Carr, Susan and Humphreys, David eds. Environmental Policies and NGO Influence: Land Degradation and Sustainable Resource Management in Sub-Saharan Africa. Routledge Research Global Environmental Change Series. London: Routledge, pp. 171–191.

Thomas, Alan; Selolwane, Onalenna and Humphreys, David (2001). The Campaign against the Southern Okavango Integrated Water Development Project. In: Thomas, Alan; Carr, Susan and Humphreys, David eds. Environmental Policies and NGO Influence: Land Degradation and Sustainable Resource Management in Sub-Saharan Africa. Routledge Research Global Environmental Change Series. London: Routledge, pp. 109–129.

Ulrich, Werner and Reynolds, Martin (2010). Critical systems heuristics. In: Reynolds, Martin and Holwell, Sue eds. Systems Approaches to Managing Change: A Practical Guide. London: Springer, pp. 243–292.

Ulrich, Werner and Reynolds, Martin (2020). Ch. 6. Critical Systems Heuristics: The Idea and Practice of Boundary Critique. In: Reynolds, Martin and Holwell, Sue eds. Systems Approaches to Making Change: A Practical Guide. 2nd Edn. London: Open University and Springer, pp. 255–305.

Valdez, Miguel; Cook, Matthew and Potter, Stephen (2024). Exploring temporal pleats and folds: the role of urban AI and robotics in reinvigorating the cyborg city. In: Cugurullo, Federico; Caprotti, Federico; Cook, Matthew; Karvonen, Andrew; McGuirk, Pauline and Marvin, Simon eds. Artificial Intelligence and the City: Urbanistic Perspectives on AI. London: Routledge, pp. 136–154.

Valdez Juarez, Alan-Miguel and Valdez, Ruben (2017). Technocentric Neoliberalism and Okness - The Shaping of the City. In: Chiavi, Elena; Girao, Matilde; Garrido I Arnaiz, Pablo; Moura Veiga, Francisco; Ramos Ordonez, Francisco and Valdez, Ruben eds. On Relations in Architecture. Park Books, pp. 167–169.

Valdez Juarez, Miguel; Wigley, Edward; Zanetti, Olly and Rose, Gillian (2020). Learning lessons for avoiding the inadvertent exclusion of communities from smart city projects. In: Aurigi, Alessandro and Odendaal, Nancy eds. Shaping Smart for Better Cities - Rethinking and Shaping Relationships Between Urban Space and Digital Technologies. London: Academic Press, pp. 221–237.

van Duppen, Jan (2021). Daydreaming of Ping-Pong Publics – The Rhythms, Sociality & Play around a Table. In: Christodoulidou, Marina; Savvides, Era; Vanezis, Evagoras and Varnavas, Nasios eds. Anachoresis: Upon Inhabiting Distances. Berlin: Archive Books, pp. 101–105.

Warren, James; González González, Adrián; Ortegón Sánchez, Adriana; Peña Díaz, Jorge; Morris, Emily and Cazanave Macías, Joiselen (2022). Walking in Havana, Cuba. In: Kotzebue, Julia R. ed. Towards Sustainable Transport and Mobility Perspectives on Travelling and Commuting in Small Island States. Hamburg, Germany: Hamburg University Press Verlag der Staats- und Universitätsbibliothek Hamburg Carl von Ossietzky, pp. 117–134.

Warren, James (2001). Cost implications of various Euro 4 and 5 after treatment solutions for heavy duty diesel vehicles. In: Institution of, Mechanical Engineers ed. 21st Century Emissions Technology. IMechE Conference Transactions 2000-2002. Bury St Edmunds, UK: Professional Engineering Limited for IMechE, pp. 35–45.

Warren, James (2017). Deep Geothermal Energy. In: Peake, Stephen ed. Renewable Energy: Power for a Sustainable Future (Fourth Edition). Oxford: Oxford University Press, pp. 489–540.

Warren, James (2009). Sustainable transport systems: learning from Cuba. In: Wilson, Gordon; Furniss, Pamela and Kimbowa, Richard eds. Environment, Development, and Sustainability: Perspectives and cases from around the world. Oxford, UK: Oxford University Press, pp. 54–64.

Warren, James (2009). Corporate responsibility in practice: building an eco-city from scratch. In: Wilson, Gordon; Furniss, Pamela and Kimbowa, Richard eds. Environment, Development, and Sustainability: Perspectives and cases from around the world. Oxford, UK: Oxford University Press, pp. 213–221.

Warren, James P. and Rhodes, Ed (2006). 'Smart' design: greening the Total Product System. In: Sarkis, Joseph ed. Greening the supply chain. Springer Verlag UK, pp. 271–291.

Webbe-Wood, David (2021). Funding and financing commercial fusion power plants. In: Nuttall, William; Konishi, Satoshi; Takeda, Shutaro and Webbe-Wood, David eds. Commercialising Fusion Energy: How small businesses are transforming big science. Institute of Physics Publishing, pp. 4–1.

Wise, Freya; Moncaster, Alice and Jones, Derek (2023). Embodied carbon and building retrofit: A heritage example. In: Azari, Rahman and Moncaster, Alice eds. The Routledge Handbook of Embodied Carbon in the Built Environment. Abingdon, Oxon: Routledge, pp. 296–328.

Wolff, Annika; Valdez Juarez, Alan; Barker, Matthew; Potter, Stephen; Gooch, Daniel; Giles, Emilie and Miles, John (2017). Engaging with the Smart City Through Urban Data Games. In: Nijholt, Anton ed. Playable Cities: The City as a Digital Playground. Gaming Media and Social Effects (1). Springer, pp. 47–66.

Wring, Dominic and Horrocks, Ivan (2001). Virtual hype? New media and the transformation of political parties and party systems. In: Axford, Barrie and Huggins, Richard eds. New Media and Politics. London, UK: Sage, pp. 191–209.

Wuyts, Marc (2003). The Agrarian question in Mozambique’s transition and reconstruction. In: Addison, Tony ed. From Conflict to Recovery in Africa. WIDER Studies in Development Economics. Oxford: Oxford University Press, pp. 141–154.

Wuyts, Marc (2002). Aid, the employment relation and the deserving poor: regaining political economy. In: FitzGerald, Valpy ed. Social Institutions and Economic Development. A Tribute to Kurt Martin. Dordrecht: Kluwer Academic Publishers, pp. 169–188.

Wynn, D.; Eckert, Claudia and Clarkson, P. J. (2007). Applied signposting: a modeling framework to support design process improvement. In: Design Engineering Division, ASME and Computers and Information in Engineering Division, ASME eds. Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 2006. New York: American Society of Mechanical Engineers.

Wynn, D. C.; Eckert, Claudia and Clarkson, P. J. (2005). Addressing uncertainty in design planning and modeling: a case study of complex aerospace design. In: Design Engineering Division, ASME and Computers and Information in Engineering Division, ASME eds. 17th International Conference on Design Theory and Methodology. New York: American Society of Mechanical Engineers.

Zamenopoulos, Theodore (2009). The mathematical conditions of design ability. In: Alexiou, Katerina; Johnson, Jeffrey and Zamenopoulos, Theodore eds. Embracing Complexity in Design. London: Routledge, pp. 95–119.

Zamenopoulos, Theodore and Alexiou, Katerina (2003). Computer-aided creativity and learning in distributed cooperative human-machine networks. In: Chiu, M-L.; Tsou, J-Y.; Kvan, T.; Morozumi, M. and Jeng, T-S. eds. Digital Design: research and practice, Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures. Dordrecht, The Netherlands: Kluwer Academic Publishers, pp. 191–201.

Zamenopoulos, Theodore and Alexiou, Katerina (2012). Complexity: what designers need to know. In: Garner, Steve and Evans, Chris eds. Design and Designing: a Critical Introduction. Berg.

Zamenopoulos, Theodore and Alexiou, Katerina (2003). Structuring the plan design process as a coordination problem - the paradigm of distributed learning control coordination. In: Longley, Paul A. and Batty, Michael eds. Advanced Spatial Analysis: The CASA Book of GIS. U.S: ESRI Press, pp. 407–426.

Zamenopoulos, Theodore and Alexiou, Katerina (2012). A complexity theoretic view of cities as artefacts of design intentionality. In: Portugali, Juval; Meyer, Han; Stolk, Egbert and Tan, Ekim eds. Complexity Theories of Cities Have Come of Age: An Overview with Implications to Urban Planning and Design. Berlin: Springer, pp. 327–346.

Zamenopoulos, Theodore and Alexiou, Katerina (2010). The influence of complexity science in design: theoretical and methodological tools. In: Tsoukala, K.; Daniil, M. and Pantelidou, H. eds. Postmodern Approaches. Thessaloniki, GR: Epikentro.

Zamenopoulos, Theodore; Alexiou, Katerina; Alevizou, Giota; Chapain, Caroline; Sobers, Shawn and Williams, Andy (2016). Varieties of Creative Citizenship. In: Hargreaves, Ian and Hartley, John eds. The Creative Citizen Unbound: How social media and DIY culture contribute to democracy, communities and the creative economy. Bristol: Policy Press, pp. 103–128.

Zhang, Xin; Gale, Colin and Eckert, Claudia (2018). Chinese Consumers and the Knitwear Fashion Market. In: Xu, Yingjiao; Chi, Ting and Su, Jin eds. Chinese Consumers and the Fashion Market. Springer Series in Fashion Business. Singapore: Springer, pp. 193–212.

Journal ItemTo Top

(2013). Articulating (mis)understanding across design discipline interfaces at a design team meeting. Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 27(2) pp. 155–166.

(2019). Sharing design definitions across product life cycles. Research in Engineering Design, 30(3) pp. 339–361.

(2019). Coal in the 21st Century: a climate of change and uncertainty. Proceedings of the Institution of Civil Engineers – Energy, 172(2) pp. 46–63.

Ab, Aziz Shuaib and Olalere, Folasayo Enoch (2014). Integrating the Malay Traditional Design Elements into Contemporary Design: An Approach towards Sustainable Innovation. Procedia - Social and Behavioral Sciences, 129 pp. 59–67.

Abburi Venkata, K.; Khayatzadeh, S.; Achouri, A.; de Oliveira, J. Araujo; Forsey, A. N.; Gungor, S.; Bouchard, P. J. and Truman, C. E. (2018). Examining Stress Relaxation in a Dissimilar Metal Weld Subjected to Postweld Heat Treatment. Materials Performance and Characterization, 7(4) pp. 675–692.

Abenyenga, Olivia; Burgess, Paul J.; Cook, Matthew and Morris, Joe (2009). Application of an ecosystem function framework to perceptions of community woodlands. Land Use Policy, 26(3) pp. 551–557.

Abolhasani, Morteza and Golrokhi, Zahra (2022). Eat to the Beat: Musical Incongruity Resolution in Restaurant Advertising. Journal of International Consumer Marketing, 34(5) pp. 567–591.

Acar, M. O.; Bouchard, P. John; Quinta da Fonseca, Joao; Fitzpatrick, Michael E. and Gungor, Salih (2010). Intergranular strains in pre-strained and welded pipes. Materials Science Forum, 652 pp. 13–18.

Acar, Murat O. and Fitzpatrick, Michael E. (2017). Determination of plasticity following deformation and welding of austenitic stainless steel. Materials Science and Engineering: A, 701 pp. 203–213.

Acar, Murat O. and Gungor, Salih (2015). Experimental and numerical study of strength mismatch in cross-weld tensile testing. Journal of Strain Analysis for Engineering Design, 50(6) pp. 349–365.

Achouri, Anas; Hosseinzadeh, Foroogh; Bouchard, P. John; Paddea, Sanjooram and Muransky, Ondrej (2021). The incremental contour method using asymmetric stiffness cuts. Materials and Design, 197, article no. 109268.

Aczel, J. C.; Peake, S. R. and Hardy, P. (2008). Designing capacity-building in e-learning expertise: Challenges and strategies. Computers and Education, 50(2) pp. 499–510.

Addis, Mark and Eckert, Claudia (2024). Explanatory frameworks in complex change and resilience system modelling. Logic Journal of IGPL (Early access).

Agrell, Cecilia; Bell, Simon; Bosco, Filipo; Diamond, Dermot; Emnéus, Jenny; Guiseppi-Elie, Anthony; Katsube, Atkins; Lynch, Jim; Morse, Stephen; Moussy, Francis G.; Murtagh, Fionn; Nair, P. K. R. and Weathers, Pam (2014). Transdisciplinary sustainability: the Council for Frontiers of Knowledge. International Journal of Transdisciplinary Research, 7(1) pp. 1–26.

Ahmad, Bilal and Fitzpatrick, Michael E. (2016). Analysis of Residual Stresses in Laser-Shock-Peened and Shot-Peened Marine Steel Welds. Metallurgical and Materials Transactions A, 48(2) pp. 759–770.

Ahmad, H. Y.; Fitzpatrick, M. E. and Edwards, L. (1997). Discussion on the method of caustics in conjunction with the method of birefringent coatings for the solution of fracture mechanics problems. International Journal of Fracture, 87(4) L97-L99.

Ahmad, H. Y.; Fitzpatrick, M. E.; Wallhead, I. R. and Edwards, L. (1996). Measurements of stress intensity factors of an interface crack under mixed mode loading. Journal of Adhesion, 56(1-4) pp. 187–204.

Ahmed, R.; Faisal, N. H.; Paradowska, A. M. and Fitzpatrick, M. E. (2012). Residual strain and fracture response of Al2O3 coatings deposited via APS and HVOF techniques. Journal of Thermal Spray Technology, 21(1) pp. 23–40.

Ahmed, R.; Faisal, N. H.; Paradowska, A. M.; Fitzpatrick, M. E. and Khor, K. A. (2011). Neutron diffraction residual strain measurements in nanostructured hydroxyapatite coatings for orthopaedic implants. Journal of the Mechanical Behavior of Biomedical Materials, 4(8) pp. 2043–2054.

Ahmed, R.; Fitzpatrick, M. E. and Faisal, N. H. (2012). A comparison of neutron diffraction and hole-drilling residual strain measurements in thermally sprayed coatings. Surface and Coatings Technology, 206(19-20) pp. 4180–4185.

Ahsan, M. Naveed; Pinkerton, Andrew J.; Moat, Richard J. and Shackleton, Judith (2011). A comparative study of laser direct metal deposition characteristics using gas and plasma-atomized Ti–6Al–4V powders. Materials Science and Engineering: A, 528(25-26) pp. 7648–7657.

Akbarian, SH.; Zarei-Hanzaki, A.; Anoushe, A.S.; Abedi, H.R.; Unnikrishnan, R. and Cios, G. (2021). Step-by-step texture modification through strain path change toward improvement of the hardening capacity in a twinning-induced-plasticity steel. Materials Science and Engineering: A, 799, article no. 140269.

Akbarian, Shima; Zarei-Hanzaki, Abbas; Abedi, Hamid Reza; Unnikrishnan, Rahul and Moat, Richard (2018). Substructure Development and Deformation Twinning Stimulation through Regulating the Processing Path during Multi-Axial Forging of Twinning Induced Plasticity Steel. Advanced Engineering Materials, 20(11), article no. 1800453.

Akhtar, N.; Bowen, J.; Asteriadou, K.; Robbins, P. T.; Zhang, Z. and Fryer, P. J. (2010). Matching the nano- to the meso-scale: measuring deposit–surface interactions with atomic force microscopy and micromanipulation. Food and Bioproducts Processing, 88(4) pp. 341–348.

Akrivos, V.; Wimpory, R. C.; Hofmann, M.; Stewart, B.; Muransky, O.; Smith, M. C. and Bouchard, J. (2020). Neutron diffraction measurements of weld residual stresses in three-pass slot weld (Alloy 600/82) and assessment of the measurement uncertainty. Journal of Applied Crystallography, 53(5) pp. 1181–1194.

Aksenova, Krestina; Gromov, Victor; Ivanov, Yurii; Qin, Rongshan and Vashchuk, Ekaterina (2022). Structural Phase Transformation of Rail Steel in Compression. Metals, 12(11), article no. 1985.

Albert, Donald G.; Taherzadeh, Shahram; Attenborough, Keith; Boulanger, Patrice and Decato, Stephen N. (2013). Ground vibrations produced by surface and near-surface explosions. Applied Acoustics, 74(11) pp. 1279–1296.

Alcalde, Juan; Heinemann, Niklas; Mabon, Leslie; Worden, Richard H.; de Coninck, Heleen; Robertson, Hazel; Maver, Marko; Ghanbari, Saeed; Swennenhuis, Floris; Mann, Indira; Walker, Tiana; Gomersal, Sam; Bond, Clare E.; Allen, Michael J.; Haszeldine, R. Stuart; James, Alan; Mackay, Eric J.; Brownsort, Peter A.; Faulkner, Daniel R. and Murphy, Steve (2019). Acorn: Developing full-chain industrial carbon capture and storage in a resource- and infrastructure-rich hydrocarbon province. Journal of Cleaner Production, 233 pp. 963–971.

Alexiou, K.; Alevizou, G.; Zamenopoulos, T.; de Sousa, S. and Dredge, L. (2015). Learning from the use of media in community-led design projects. Cultural Science, 8(1) pp. 30–40.

Alexiou, Katerina; Hale, Veronica and Zamenopoulos, Theodore (2022). Design Capital: Unearthing the Design Capabilities of Community Groups. International Journal of Design, 16(2) pp. 33–46.

Alexiou, K.; Zamenopoulos, T.; Johnson, J. H. and Gilbert, S. J. (2009). Exploring the neurological basis of design cognition using brain imaging: some preliminary results. Design Studies, 30(6) pp. 623–647.

Alexiou, Katerina (2010). Coordination and emergence in design. CoDesign: International Journal of CoCreation in Design and the Arts, 6(2) pp. 75–97.

Alexiou, Katerina (2011). Understanding design as a multiagent coordination process: distribution, complexity, and emergence. Environment and Planning B: Planning and Design, 38(2) pp. 248–266.

Alexiou, Katerina and Zamenopoulos, Theodore (2008). Design as a social process: a complex systems perspective. Futures, 40(6) pp. 586–595.

Alexiou, Katerina; Zamenopoulos, Theodore; Hale, Vera; West, Susie and de Sousa, Sophia (2020). Empowering design practices: exploring relations between architecture, faith, society and community. Open Arts Journal(9), article no. 5.

Ali, Haider; Ghadbeigi, Hassan; Hosseinzadeh, Foroogh; de Oliveira, Jeferson and Mumtaz, Kamran (2019). Effect of pre-emptive in situ parameter modification on residual stress distributions within selective laser-melted Ti6Al4V components. The International Journal of Advanced Manufacturing Technology, 103(9-12) pp. 4467–4479.

Alyami, Hamad; Koner, Jasdip; Dahmash, Eman Z.; Bowen, James; Terry, David and Mohammed, Afzal R. (2017). Microparticle surface layering through dry coating: impact of moisture content and process parameters on the properties of orally disintegrating tablets. Journal of Pharmacy and Pharmacology, 69(7) pp. 807–822.

Alyami, Hamad; Dahmash, Eman; Bowen, James and Mohammed, Afzal R. (2017). An investigation into the effects of excipient particle size, blending techniques and processing parameters on the homogeneity and content uniformity of a blend containing low-dose model drug. PLoS ONE, 12(6), article no. e0178772.

Ametordzi, Sylvanus and Olalere, Folasayo (2024). The effect of digital technology on graphic design ideation output. IDA: International Design and Art Journal, 6(1) pp. 144–156.

Anderson, Jane and Moncaster, Alice (2020). Embodied carbon of concrete in buildings: Part 1 - analysis of published EPD. Buildings and Cities, 1(1) pp. 198–217.

Anderson, Jane and Moncaster, Alice (2023). Embodied carbon, embodied energy and renewable energy: a review of Environmental Product Declarations. Proceedings of the Institution of Civil Engineers - Structures and Buildings, 176(12) pp. 986–997.

Anderson, Lewis R.; Hunter, Ann P.; Kershaw, Matthew J.; Bylikin, Sergey Y.; Bowen, James; Taylor, Peter G.; Birchall, Martin A. and Mehrban, Nazia (2024). "Clicking” trimeric peptides onto hybrid T8POSS nanocages and identifying synthesis limitations. Nanoscale (early access).

Anderson, Carl and McMillan, Elizabeth (2003). Of ants and men: self organization in human and insect teams. Emergence: Complexity and Organization, 5(2) pp. 29–41.

Andrews, James W.; Bowen, James and Cheneler, David (2013). Optimised determination of viscoelastic properties using compliant measurement systems. Soft Matter, 9(23) pp. 5581–5593.

Anthony, C. J.; Bowen, J.; Torricelli, G.; Carter, E. L.; Ward, M. C. L. and Binns, C. (2008). AFM characterisation of silicon-on-insulator push-in plates for Casimir force measurements. Micro & Nano Letters, 3(1) pp. 7–11.

Araujo de Oliveira, J.; Kowal, J.; Gungor, S. and Fitzpatrick, M. E. (2015). Determination of normal and shear residual stresses from fracture surface mismatch. Materials & Design, 83(C) pp. 176–184.

Arif, T. T. and Qin, R. S. (2013). A phase-field model for bainitic transformation. Computational Materials Science, 77 pp. 230–235.

Arif, Tansel T. and Qin, Rong Shan (2014). A phase-field model for the formation of martensite and bainite. Advanced Materials Research, 922 pp. 31–36.

Ariyo, Owolabi O.; Eckert, Claudia M. and Clarkson, P. John (2009). Challenges in identifying the knock-on effects of engineering change. International Journal of Design Engineering, 2(4) pp. 414–431.

Armson, R.; Ison, R.L.; Short, L.; Ramage, M. and Reynolds, M. (2001). Rapid institutional appraisal. Systemic Practice and Action Research, 14(6) pp. 763–777.

Asgari, Behnoosh and Bowen, James (2017). Gallium (III)-metalloporphyrin grafted magnetite nanoparticles for fluoride removal from aqueous solutions. Natural Products Chemistry & Research, 5(5), article no. 282.

Ashley, N. J.; Parfitt, D.; Chroneos, A. and Grimes, R. W. (2009). Mechanisms of nonstoichiometry in HfN1-x. Journal of Applied Physics, 106(8), article no. 083502.

Ashley, S. F.; Fenner, R. A.; Nuttall, W. J. and Parks, G. T. (2015). Life-cycle impacts from novel thorium–uranium-fuelled nuclear energy systems. Energy Conversion and Management, 101 pp. 136–150.

Ashley, S. F.; Lindley, B. A.; Parks, G. T.; Nuttall, W. J.; Gregg, R.; Hesketh, K. W.; Kannan, U.; Krishnani, P. D.; Singh, B.; Thakur, A.; Cowper, M. and Talamo, A. (2014). Fuel cycle modelling of open cycle thorium-fuelled nuclear energy systems. Annals of Nuclear Energy, 69 pp. 314–330.

Ashley, S. F.; Vaughan, G. J.; Nuttall, W. J. and Thomas, P. J. (2017). Considerations in relation to off-site emergency procedures and response for nuclear accidents. Process Safety and Environmental Protection, 112(A) pp. 77–95.

Ashley, S.F.; Vaughan, G.J.; Nuttall, W.J.; Thomas, P.J. and Higgins, N.A. (2017). Predicting the cost of the consequences of a large nuclear accident in the UK. Process Safety and Environmental Protection, 112 pp. 96–113.

Ashley, Stephen F.; Parks, Geoffrey T.; Nuttall, William J.; Boxall, Colin and Grimes, Robin G. (2012). Nuclear Energy: Thorium fuel has risks. Nature, 492(7427) pp. 31–33.

Ashley, Steve; Fenner, Richard; Nuttall, William and Parks, Geoffrey (2013). Open cycle thorium–uranium-fuelled nuclear energy systems. Proceedings of the ICE: Energy, 166(EN2) pp. 74–81.

Attallah, M. M.; Terasaki, H.; Moat, R. J.; Bray, S. E.; Komizo, Y. and Preuss, M. (2011). In-situ observation of primary γ′ melting in Ni-base superalloy using confocal laser scanning microscopy. Materials Characterization, 62(8) pp. 760–767.

Attard, Marie R. G.; Bowen, James; Corado, René; Hall, Linnea S.; Dorey, Robert A. and Portugal, Steven J. (2021). Ecological drivers of eggshell wettability in birds. Journal of The Royal Society Interface, 18(183), article no. 20210488.

Attard, Marie R. G.; Bowen, James and Portugal, Steven J. (2023). Surface texture heterogeneity in maculated bird eggshells. Journal of The Royal Society Interface, 20(204), article no. 20230293.

Attard, Marie R. G. and Portugal, Steven J. (2021). Climate variability and parent nesting strategies influence gas exchange across avian eggshells. Proceedings of the Royal Society B: Biological Sciences, 288(1953), article no. 20210823.

Attard, Marie R.G. and Portugal, Steven J. (2024). Global diversity and adaptations of avian eggshell thickness indices. Ibis, 166(2) pp. 534–550.

Attenborough, Keith and Taherzadeh, Shahram (2024). Phase and group speeds of airborne surface waves over porous layers and periodically rough hard surface. Journal of the Acoustical Society of America, 156(2) pp. 1123–1134.

Attenborough, Keith; Bashir, Imran and Taherzadeh, Shahram (2011). Outdoor ground impedance models. Journal of the Acoustical Society of America, 129(5) pp. 2806–2819.

Attenborough, Keith; Bashir, Imran and Taherzadeh, Shahram (2016). Exploiting ground effects for surface transport noise abatement. Noise Mapping, 3(1), article no. 1.

Ayele, Seife; Shen, Wei; Chiyemura, Frangton and Gu, Jing (2021). Enhancing China–Africa Cooperation in the Renewable Energy Sector. IDS Policy Briefing, 76(March 2021), article no. 76.

Ayele, Seife (2006). The industry and location impacts of investment incentives on SMEs start-up in Ethiopia. Journal of International Development, 18(1) pp. 1–13.

Ayele, Seife (2005). Biotechnology generation, delivery and adoption: the case of Bt biopesticide in Egypt. International Journal of Technology Management and Sustainable Development, 4(2) pp. 75–91.

Ayele, Seife (2007). The legitimation of GMO governance in Africa. Science and Public Policy, 34(4) pp. 239–249.

Ayele, Seife (2008). Biotechnology and biodiversity debates and policies in Africa. International Journal of Biotechnology, 10(2-3) pp. 207–223.

Ayele, Seife; Chataway, Joanna and Wield, David (2006). Partnerships in African Crop Biotech. Nature Biotechnology, 24(6) 619 -621.

Ayele, Seife and Wield, David (2005). Science and technology capacity building and partnership in African agriculture: perspectives on Mali and Egypt. Journal of International Development, 17(5) 631 -646.

Bachmair, Sophie; Stahl, Kerstin; Collins, Kevin; Hannaford, Jamie; Acreman, Mike; Svoboda, Mark; Knutson, Cody; Helm Smith, Kelly; Wall, Nicole; Fuchs, Brian; Crossman, Neville and Overton, Ian C. (2016). Drought indicators revisited: the need for a wider consideration of environment and society. WIREs Water, 3(4) pp. 516–536.

Bacon, D. H.; Edwards, L.; Moffatt, J. E. and Fitzpatrick, M. E. (2011). Synchrotron X-ray diffraction measurements of internal stresses during loading of steel-based metal matrix composites reinforced with TiB2 particles. Acta Materialia, 59(9) pp. 3373–3383.

Bacon, D.H.; Edwards, L.; Moffatt, J. E. and Fitzpatrick, M. E. (2013). Fatigue and fracture of a 316 stainless steel metal matrix composite reinforced with 25% titanium diboride. International Journal of Fatigue, 48 pp. 39–47.

Baczmanski, A.; Levy-Tubiana, R.; Fitzpatrick, M.E. and Lodini, A. (2004). Elastoplastic deformation of Al/SiCp metal–matrix composite studied by self-consistent modelling and neutron diffraction. Acta Materialia, 52 pp. 1565–1577.

Bagga, K.; McCann, R.; O'Sullivan, F.; Ghosh, P.; Krishnamurthy, S.; Stalcup, A.; Vázquez, M. and Brabazon, D. (2017). Nanoparticle functionalized laser patterned substrate: an innovative route towards low cost biomimetic platforms. RSC Advances, 7 pp. 8060–8069.

Baines, T. S.; Lightfoot, H. W.; Evans, S.; Neely, A.; Greenough, R.; Peppard, J.; Roy, R.; Shehab, E.; Braganza, A.; Tiwari, A.; Alcock, J. R.; Angus, J. P.; Bastl, M.; Cousens, A.; Irving, P.; Johnson, M.; Kingston, J.; Lockett, H.; Martinez, V.; Michele, P.; Tranfield, D.; Walton, I. M. and Wilson, H. (2007). State-of-the-art in product-service systems. Proceedings of the Institution of Mechanical Engineers, Part B, Journal of Engineering Manufacture, 221(10) pp. 1543–1552.

Baka, Anastasia and Mabon, Leslie (2022). Assessing equality in neighbourhood availability of quality greenspace in Glasgow, Scotland, United Kingdom. Landscape Research, 47(5) pp. 584–597.

Bakenne, Adetokunboh; Nuttall, William and Kazantzis, Nikolaos (2016). Sankey-Diagram-based insights into the hydrogen economy of today. International Journal of Hydrogen Energy, 41(19) pp. 7744–7753.

Balart, M.J.; Bouzina, A.; Edwards, L. and Fitzpatrick, M.E. (2004). The onset of tensile residual stresses in grinding of hardened steels. Materials Science and Engineering: A, 367(1-2) pp. 132–142.

Baragau, Ioan-Alexandru; Lu, Zhen; Power, Nicholas P.; Morgan, David J.; Bowen, James; Diaz, Pedro and Kellici, Suela (2021). Continuous hydrothermal flow synthesis of S-functionalised carbon quantum dots for enhanced oil recovery. Chemical Engineering Journal, 405, article no. 126631.

Barnes, Amy Jane; Charnley, Kim; Dohmen, Renate and Lotz, Nicole (2020). Colonial histories, museum collections, FabLabs and community engagement: flows of practices, cultures and people – a roundtable. Open Arts Journal, 9 pp. 91–118.

Barratt, Rod (2006). Performability: pedagogical perspectives. International Journal of Performability Engineering, 2(1) pp. 61–74.

Barratt, Rod S. (2006). Meeting lifelong learning needs by distance teaching: clean technology. Journal of Cleaner Production, 14(9-11) pp. 906–915.

Barrett, Christopher L.; Johnson, Jeffrey and Marathe, Madhav (2018). High Performance Synthetic Information Environments : An integrating architecture in the age of pervasive data and computing. ACM Ubiquity, 2018(3) pp. 1–11.

Barry, N.; Hainsworth, S. V. and Fitzpatrick, M. E. (2009). Effect of shot peening on the fatigue behaviour of cast magnesium A8. Materials Science and Engineering A, 507(1-2) pp. 50–57.

Bartzis, John G.; Michael, Costas; Michaelidou, Stella; Missia, Dafni A.; Saraga, Dikaia E.; Tolis, Evangelos I.; Psoma, S.; Petaloti, Christine; Kotzias, Dimitrios and Barero-Moreno, Josefa M. (2008). Concentrations of VOCs and ozone in indoor environments: A case study in two Mediterranean cities during winter period. Fresenius Environmental Bulletin, 17(9b) pp. 1480–1484.

Bashir, I.; Hill, T.; Taherzadeh, S.; Attenborough, K. and Hornikx, M. (2014). Reduction of surface transport noise by ground roughness. Applied Acoustics, 83(1) pp. 1–15.

Bashir, Imran; Taherzadeh, Shahram and Attenborough, Keith (2013). Diffraction assisted rough ground effect: models and data. Journal of the Acoustical Society of America, 133(3) pp. 1281–1292.

Bashir, Imran; Taherzadeh, Shahram and Attenborough, Keith (2013). Surface waves over periodically-spaced strips. Journal of the Acoustical Society of America, 134(6) pp. 4691–4697.

Bashir, Imran; Taherzadeh, Shahram; Shin, Ho-Chul and Attenborough, Keith (2015). Sound propagation over soft ground without and with crops and potential for surface transport noise attenuation. Journal of the Acoustical Society of America, 137(1) pp. 154–164.

Bate, Steve and Bouchard, P. John (2011). The validation of weld residual stresses for use in structural integrity assessment. Applied Mechanics and Materials, 70 pp. 297–302.

Beck, Alison J.; Candan, Sennur; Short, Robert D.; Goodyear, Alec and Braithwaite, Nick St.J. (2001). The Role of ions in the plasma polymerization of allylamine. Journal of Physical Chemistry B, 105(24) pp. 5730–5736.

Behray, Mehrnaz; Webster, Carl A.; Pereira, Sara; Ghosh, Paheli; Krishnamurthy, Satheesh; Al-Jamal, Wafa T and Chao, Yimin (2016). Synthesis of Diagnostic Silicon Nanoparticles for Targeted Delivery of Thiourea to Epidermal Growth Factor Receptor-Expressing Cancer Cells. ACS Applied Materials and Interfaces, 8(14) pp. 8908–8917.

Bekker, Mathilde; Beusmans, Julie; Keyson, David and Lloyd, Peter (2003). KidReporter: a user requirements gathering technique for designing with children. Interacting with Computers, 15(2) pp. 187–202.

Bell, Simon and Morse, Stephen (2013). Rich pictures: a means to explore the ‘sustainable mind’? Sustainable Development, 21(1) pp. 30–47.

Bell, Simon and Walker, Steve (2011). Futurescaping infinite bandwidth, zero latency. Futures, 43(5) pp. 525–539.

Bell, S. and Morse, S. (2007). Problem structuring methods: theorizing the benefits of deconstructing sustainable development projects. Journal of the Operational Research Society, 58(5) pp. 576–587.

Bell, S. and Morse, S. (2013). An approach to comparing external and internal methods for analysing group dynamic. Group Dynamics, 17(4) pp. 281–298.

Bell, Simon (2005). Editorial. Systemic Practice and Action Research, 18(4) pp. 335–337.

Bell, Simon (2002). Surfing the Third Wave: Experiential Reflections on New Working Practices. Systemic Practice and Action Research, 15(1) 67 -82.

Bell, Simon (2001). Special Issue Editorial: Reflections on Systems Thinking and Systems Practice at the UK Open University. Systemic Practice and Action Research, 14(6) pp. 661–667.

Bell, Simon (2008). Systemic approaches to managing across the gap in the Public Sector: results of an action research programme. Systemic Practice and Action Research, 21(3) pp. 227–240.

Bell, Simon (2011). From sustainable community to Big Society: ten years learning with the Imagine approach. International Research in Geographical and Environmental Education, 20(3) pp. 247–267.

Bell, Simon (2012). John Naughton Technology Systemisist: Observations on a new book from the Networker. Systemic Practice and Action Research, 25(3) pp. 301–304.

Bell, Simon (2012). DPSIR = A problem structuring method? An exploration from the “Imagine” approach. European Journal of Operational Research, 222(2) pp. 350–360.

Bell, Simon (2015). Participating in the knowledge society. Systemic Practice and Action Research, 28(3) pp. 289–296.

Bell, Simon (2019). Fake News, Paradigm of Fear & Sustainability: Research Report on Climate Fear(s). International Journal of Fear Studies, 1(1) pp. 91–107.

Bell, Simon; Benatti, Francesca; Edwards, Neil R.; Laney, Robin; Morse, David R.; Piccolo, Lara and Zanetti, Oliver (2018). Smart Cities and M3: Rapid Research, Meaningful Metrics and Co-Design. Systemic Practice and Action Research, 31(1) pp. 27–53.

Bell, Simon; Berg, Tessa and Morse, Stephen (2016). Rich Pictures: Sustainable Development and Stakeholders – The Benefits of Content Analysis. Sustainable Development, 24(2) pp. 136–148.

Bell, Simon; Berg, Tessa and Steve, Morse (2019). Towards an Understanding of Rich Picture Interpretation. Systemic Practice and Action Research, 32(6) pp. 601–614.

Bell, Simon and Christina, Ann (2006). Applying Systemic Project Management Approaches for the UK National Health Service. Systemic Practice and Action Research, 19(1) pp. 27–43.

Bell, Simon; Correa Peña, Ana and Prem, Marko (2013). Imagine coastal sustainability. Ocean and Coastal Management, 83 pp. 39–51.

Bell, Simon; Douce, Chris; Caeiro, Sandra; Teixeira, Antonio; Marin-Aranda, Rosa and Otto, Daniel (2017). Sustainability and distance learning: a diverse European experience? Open Learning, 32(2) pp. 95–102.

Bell, Simon and Farren Bradley, Judi (2012). London's Olympic legacy and the Imagine methodology. Local Economy, 27(1) pp. 68–77.

Bell, Simon and Flood, Robert L. (2011). Fair and open approach to academic publishing (Editorial). Systemic Practice and Action Research, 24(6) pp. 499–503.

Bell, Simon and Lane, Amanda (2009). Creating sustainable communities - A means to enhance social mobility? Local Economy, 24(8) pp. 646–657.

Bell, Simon and Lane, Andrew (1998). From teaching to learning: technological potential and sustainable, supported open learning. Systems Practice and Action Research, 11(6) pp. 629–650.

Bell, Simon; Lane, Andy; Collins, Kevin; Berardi, Andrea and Slater, Rachel (2017). Teaching Environmental Management Competencies Online: Towards “Authentic” Collaboration? European Journal of Open, Distance and e-Learning, 20(1) pp. 22–44.

Bell, Simon; Mahroun, Sami and Yassin, Nasser (2017). Towards understanding problem structuring and groups with triple task methodology 'e'. Journal of the Operational Research Society, 68(2) pp. 192–206.

Bell, Simon and Morse, Stephen (2005). Delivering sustainability therapy in sustainable development projects. Journal of Environmental Management, 75(1) pp. 37–51.

Bell, Simon and Morse, Stephen (2005). Holism and understanding sustainability. Systemic Practice and Action Research, 18(4) pp. 409–426.

Bell, Simon and Morse, Stephen (2004). Experiences with sustainability indicators and stakeholder participation: a case study relating to a 'Blue Plan' project in Malta. Sustainable Development, 12(1) pp. 1–14.

Bell, Simon and Morse, Stephen (2001). Breaking through the glass ceiling: Who really cares about Sustainability Indicators? Local Environment, 6(3) pp. 291–309.

Bell, Simon and Morse, Stephen (2007). Story telling in sustainable development projects. Sustainable Development, 15(2) pp. 97–110.

Bell, Simon and Morse, Stephen (2010). Triple Task method: systemic, reflective action research. Systemic Practice and Action Research, 23(6) pp. 443–452.

Bell, Simon and Morse, Stephen (2011). An analysis of the factors influencing the use of indicators in the European Union. Local Environment, 16(3) pp. 281–302.

Bell, Simon and Morse, Stephen (2011). Being, engaging, contextualizing and managing matrix — a means for nonspecialists to assess group dynamics? Systems Research and Behavioural Science, 28(4) pp. 319–339.

Bell, Simon and Morse, Stephen (2014). Groups and indicators in post-industrial society. Sustainable Development, 22(3) pp. 145–157.

  • Proof (PDF) This file is not available for public download

Bell, Simon and Morse, Stephen (2012). Groups and facilitators within problem structuring processes. Journal of the Operational Research Society, 64(7) pp. 959–972.

Bell, Simon and Morse, Stephen (2013). Towards an understanding of how policy making groups use indicators. Ecological Indicators, 35 pp. 13–23.

Bell, Simon and Morse, Stephen (2018). Sustainability Indicators Past and Present: What Next? Sustainability, 10(5), article no. 1688.

Bell, Simon; Morse, Stephen and Shah, Rupesh (2012). Understanding stakeholder participation as part of sustainable development. Journal of Environmental Management, 101(1) pp. 13–22.

Bell, Simon and Wood-Harper, A. T. (2007). Applying the multiview analysis and design methodology in a non governmental organisation in Bangladesh. Journal of Global Information Technology Management, 10(2) pp. 7–33.

Bell, Simon and Wood-Harper, A.T. (2007). Applying the multiview analysis and design methodology in a non-governmental organisation in Bangladesh. Journal of Global Information Technology Management, 10(2) pp. 7–33.

Bell, Simon and Wood-Harper, Trevor (2014). The innovation of Multiview3 for development professionals. Electronic Journal of Information Systems in Developing Countries, 63(3) pp. 1–25.

Bellamy, Christine; Horrocks, Ivan and Webb, Jeff (1995). Exchanging information with the public: From one-stop shops to community information systems. Local Government Studies, 21(1) pp. 11–30.

Bellchambers, Philip; Varagnolo, Silvia; Maltby, Corinne and Hatton, Ross A. (2021). High-Performance Transparent Copper Grid Electrodes Fabricated by Microcontact Lithography for Organic Photovoltaics. ACS Applied Energy Materials, 4(4) pp. 4150–4155.

Bellchambers, Philip; Lee, Jaemin; Varagnolo, Silvia; Amari, Houari; Walker, Marc and Hatton, Ross A. (2018). Elucidating the Exceptional Passivation Effect of 0.8 nm Evaporated Aluminium on Transparent Copper Films. Frontiers in Materials, 5, article no. 71.

Ben Rhouma, A.; Braham, C.; Fitzpatrick, M. E.; Lédion, J. and Sidhom, H. (2001). Effects of surface preparation on pitting resistance, residual stress, and stress corrosion cracking in austenitic stainless steels. Journal of Materials Engineering and Performance, 10(5) pp. 507–514.

Benghalia, G.; Rahimi, S.; Wood, J.; Coules, H. and Paddea, S. (2018). Multiscale Measurements of Residual Stress in a Low-Alloy Carbon Steel Weld Clad with IN625 Superalloy. Materials Performance and Characterization, 7(4) pp. 606–629.

Berardi, Andrea (2024). [Book Review] Sustainable justice Sustainability for the Forgotten Gary E. Machlis University of Utah Press, 2024. 262 pp. Science, 384(6694) p. 391.

Berardi, Andrea; Tschirhart, Céline; Mistry, Jayalaxshmi; Bignante, Elisa; Haynes, Lakeram; Albert, Grace; Benjamin, Ryan; Xavier, Rebecca and Jafferally, Deirdre (2013). From resilience to viability: a case study of indigenous communities of the North Rupununi, Guyana. EchoGéo(24)

Berardi, Andrea (2002). ASTROMOD: a computer program integrating vegetation dynamics modelling, environmental modelling and spatial data visualisation in Microsoft Excel. Environmental Modelling and Software, 17(4) pp. 403–412.

Berardi, Andrea (2011). The challenges of transformational learning at a distance: a year in the life of an Open University learning unit on the environment. Learning and Teaching in Higher Education (LATHE)(5) pp. 135–142.

Berardi, Andrea (2016). Book review of 'Amazonian Roots: Indigenous Mobility and Colonial Communities in Northern Brazil' by Roller, Heather. Bulletin of Latin American Research, 35(2) pp. 250–252.

Berardi, Andrea (2006). Book Review: Handbook of ecological indicators for assessment of ecosystem health, edited by S. E. Jørgensen, R. Costanza and F.-L. Xu. CRC Press, Boca Raton, FL, and London, 2005. ISBN 1 56670 665 3, xviii+439 pp. Land Degradation and Development, 17(2) 233 -233.

Berardi, Andrea; Mistry, Jayalaxshmi; Tschirhart, Céline; Bignante, Elisa; Davis, Odacy; Haynes, Lakeram; Benjamin, Ryan; Albert, Grace; Xavier, Rebecca; Jafferally, Deirdre and de Ville, Géraud (2015). Applying the system viability framework for cross-scalar governance of nested social-ecological systems in the Guiana Shield, South America. Ecology and Society, 20(3), article no. 42.

Bergin, A.; Chapman, S. C.; Moloney, N. R. and Watkins, N. W. (2022). Variation of Geomagnetic Index Empirical Distribution and Burst Statistics Across Successive Solar Cycles. Journal of Geophysical Research: Space Physics, 127(1), article no. e2021JA029986.

Bergin, A.; Chapman, S. C.; Watkins, N. W.; Moloney, N. R. and Gjerloev, J. W. (2023). Extreme Event Statistics in Dst, SYM‐H, and SMR Geomagnetic Indices. Space Weather, 21(3), article no. e2022SW003304.

Berry, Craig and Gabay, Clive (2009). Transnational political action and 'global civil society' in practice: the case of Oxfam. Global Networks, 9(3) pp. 339–358.

Berry, David L.; Taherzadeh, Shahram and Attenborough, Keith (2019). Acoustic surface wave generation over rigid cylinder arrays on a rigid plane. The Journal of the Acoustical Society of America, 146(4) pp. 2137–2144.

Bhagurkar, Ashutosh and Qin, Rongshan (2022). The Microstructure Formation in Slag Solidification at Continuous Casting Mold. Metals, 12(4), article no. 617.

Bhagurkar, Ashutosh and Qin, Rongshan (2023). The relationship between electric processing condition and microstructure in the solidification of multicomponent oxides. Ceramics International, 49(12) pp. 20096–20103.

Bhagurkar, Ashutosh G. and Qin, Rongshan (2022). Effect of electropulsing on the solidification of mould flux. Journal of Materials Research and Technology, 19 pp. 2146–2155.

Bhamji, I.; Moat, R. J.; Preuss, M.; Threadgill, P. L.; Addison, A. C. and Peel, M. J. (2012). Linear friction welding of aluminium to copper. Science and Technology of Welding & Joining, 17(4) pp. 314–320.

Bhamji, I.; Preuss, M.; Moat, R. J.; Threadgill, P. L. and Addison, A. C. (2012). Linear friction welding of aluminium to magnesium. Science and Technology of Welding & Joining, 17(5) pp. 368–374.

Bhamji, Imran; Preuss, Michael; Threadgill, Philip L.; Moat, Richard J.; Addison, Adrian C. and Peel, Matthew J. (2010). Linear friction welding of AISI 316L stainless steel. Materials Science and Engineering: A, 528(2) pp. 680–690.

Bhamra, T.; Evans, S.; Zwan, F. van der and Cook, M. (2001). Moving from eco-products to eco-services. Journal of Design Research, 1(2)

Bignante, Elisa; Mistry, Jayalaxshmi; Berardi, Andrea and Tschirhart, Céline (2016). Feeling and acting ‘different’ emotions and shifting self-perceptions whilst facilitating a participatory video process. Emotion, Space and Society, 21 pp. 5–12.

Bilbao, Bibiana; Mistry, Jayalaxshmi; Millán, Adriana and Berardi, Andrea (2019). Sharing Multiple Perspectives on Burning: Towards a Participatory and Intercultural Fire Management Policy in Venezuela, Brazil, and Guyana. Fire, 2(3), article no. 39.

Birdi-Chouhan, G.; Shelton, R. M.; Bowen, J.; Goldberg-Oppenheimer, P.; Page, S. J.; Hanna, J. V.; Peacock, A.; Wright, A.J. and Grover, L. M. (2016). Soluble silicon patterns and templates: calcium phosphate nanocrystal deposition in collagen type 1. RSC Advances, 102(6) pp. 99809–99815.

Birkett, Stacey; Lloyd, Peter and Garner, Steve (2011). Education to practice: the development of responsibility in product designers. Journal of Design Research, 9(2) pp. 131–145.

Blackmore, Chris; van Bommel, Severine; de Bruin, Annemarieke; de Vries, Jasper; Westberg, Lotten; Powell, Niel; Foster, Natalie; Collins, Kevin; Roggero, Pier Paolo and Seddaiu, Giovanna (2016). Learning for Transformation of Water Governance: Reflections on Design from the Climate Change Adaptation and Water Governance (CADWAGO) Project. Water, 8(11), article no. 510.

Blackwell, A. D; Eckert, C. M.; Bucciarelli, L. L and Earl, C. F. (2009). Witnesses to design: A phenomenology of comparative design. Design Issues, 25(1) pp. 36–47.

Blok, Anders; Courmont, Antoine; Hoyng, Rolien; Marquet, Clément; Minor, Kelton; Nold, Christian and Young, Meg (2017). Data Platforms and Cities. Tecnoscienza: Italian Journal of Science & Technology Studies, 8(2) pp. 175–219.

Bloomfield, D.; Collins, K.; Fry, C. and Munton, R. (2001). Deliberation and inclusion: vehicles for increasing trust in UK public governance? Environment and Planning C: Government and Policy, 19(4) pp. 501–513.

Boardman, Carl P.; Gauci, Vincent; Fox, Andrew; Blake, Stephen and Beerling, David J. (2013). Reduction of the temperature sensitivity of minerotrophic fen methane emissions by simulated glacial atmospheric carbon dioxide starvation. Journal of Geophysical Research: Biogeosciences, 118(2) pp. 462–470.

Boardman, Carl P.; Gauci, Vincent; Watson, Jonathan S.; Blake, Stephen and Beerling, David J. (2011). Contrasting wetland CH4 emission responses to simulated glacial atmospheric CO2 in temperate bogs and fens. New Phytologist, 192(4) pp. 898–911.

Boehnert, Joanna; Sinclair, Matt and Dewberry, Emma (2022). Sustainable and Responsible Design Education: Tensions in Transitions. Sustainability, 14(11), article no. 6397.

Bohm, Matthew; Eckert, Claudia; Sen, Chiradeep; Srinivasan, Venkatamaran; Summers, Joshua D. and Vermaas, Pieter (2017). Thoughts on Benchmarking of Function Modeling: Why and How. Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 31(4) pp. 393–400.

Boin, M.; Hilger, A.; Kardjilov, N.; Szang, S. Y.; Oliver, E. C.; James, J. A.; Randau, C. and Wimpory, R. C. (2011). Validation of Bragg edge experiments by Monte Carlo simulations for quantitative texture analysis. Journal of Applied Crystallography, 44(5) pp. 1040–1046.

Bompard, Ettore; Masera, Marcelo and Nuttall, William J. (2015). High tension electricity: new multi-scale complexities in the electricity system. Technological Forecasting and Social Change, 96 pp. 327–333.

Bon, Ranko; Gibson, Virginia and Luck, Rachael (2002). Annual CREMRU‐JCI survey of corporate real estate practices in Europe and North America: 1993‐2001. Facilities, 20(11/12) pp. 357–373.

Bon, Ranko; Gibson, Virginia and Luck, Rachael (2003). Annual CREMRU‐JCI survey of corporate real estate practices in Europe and North America: 1993‐2002. Facilities, 21(7/8) pp. 151–167.

Bon, Ranko and Luck, Rachael (1999). Outsourcing of property-related management functions in Europe and North America, 1993-1998. Construction Management and Economics, 17(4) pp. 409–412.

Bon, Ranko and Luck, Rachael (2001). Annual CREMRU‐JCI survey of corporate real estate practices in Europe and North America: 1993‐2000. Facilities, 19(11/12) pp. 386–395.

Bon, Ranko and Luck, Rachael (1999). Annual CREMRU‐JCI survey of corporate real estate practices in Europe and North America: 1993‐1998. Facilities, 17(5/6) pp. 167–176.

Booth, Joran W.; Reid, Tahira; Eckert, Claudia and Ramani, Karthik (2015). Comparing functional analysis methods for product dissection tasks. Journal of Mechanical Design, 137(8), article no. 081101.

Borda-Rodriguez, Alexander and Huzair, Farah (2011). Revisiting the Paris Declaration: pharmacogenomics and personalized medicine as accelerators for development aid and effectiveness. Current Pharmacogenomics and Personalized Medicine, 9(4) pp. 240–242.

Borghi, Josephine; Ismail, Sharif; Hollway, James; Kim, Rakhyun E.; Sturmberg, Joachim; Brown, Garrett; Mechler, Reinhard; Volmink, Heinrich; Spicer, Neil; Chalabi, Zaid; Cassidy, Rachel; Johnson, Jeffrey; Foss, Anna; Koduah, Augustina; Searle, Christa; Komendantova, Nadejda; Semwanga, Agnes and Moon, Suerie (2022). Viewing the global health system as a complex adaptive system – implications for research and practice. F1000Research, 11, article no. 1147.

Borowski-Maaser, Ilke; Graversgaard, Morten; Foster, Natalie; Prutzer, Madeleine; Roest, Allard Hans and Boogaard, Floris (2021). WaterCoG: Evidence on How the Use of Tools, Knowledge, and Process Design Can Improve Water Co-Governance. Water, 13(9), article no. e1206.

Bossu, Carina and Fountain, Wendy (2015). Capacity-building in open education: an Australian approach. Open Praxis, 7(2) pp. 123–132.

Bouchard, P. J. (2008). Code characterisation of weld residual stress levels and the problem of innate scatter. International Journal of Pressure Vessels and Piping, 85(3) pp. 152–165.

Bouchard, P. J. (2009). The NeT bead-on-plate benchmark for weld residual stress simulation. International Journal of Pressure Vessels and Piping, 86(1) pp. 31–42.

Bouchard, P. J. (2007). Validated residual stress profiles for fracture assessments of stainless steel pipe girth welds. International Journal of Pressure Vessels and Piping, 84(4) pp. 195–222.

Bouchard, P. J.; George, D.; Santisteban, J. R.; Bruno, G.; Dutta, M.; Edwards, L.; Kingston, E. and Smith, D. J. (2005). Measurement of the residual stresses in a stainless steel pipe girth weld containing long and short repairs. International Journal of Pressure Vessels and Piping, 82(4) pp. 299–310.

Bouchard, P. J.; Goldthorpe, M. R. and Prottey, P. (2001). J-integral and local damage fracture analyses for a pump casing containing large weld repairs. International Journal of Pressure Vessels and Piping, 78(4) pp. 295–305.

Bouchard, P. J.; Treimer, W. and Fiori, F. (2002). Characterisation of creep cavitation damage in a stainless steel pressure vessel using small angle neutron scattering. Applied Physics A: Materials Science & Processing, 74(1 Supp) s1689-s1691.

Bouchard, P. J. and Withers, P. J. (2004). The appropriateness of residual stress length scales in structural integrity. Journal of Neutron Research, 12(1) pp. 81–91.

Bouchard, P. J.; Withers, P. J.; McDonald, S. A. and Heenan, R. K. (2004). Quantification of creep cavitation damage around a crack in a stainless steel pressure vessel. Acta Materialia, 52(1) pp. 23–34.

Bouchard, P. John (2012). Fourier basis for the engineering assessment of cracks in residual stress fields. Engineering Fracture Mechanics, 91 pp. 37–50.

Bowen, D. Keith; Buys, Kurijn; Dart, Mathew and Sharp, David (2019). Assessing the sound of a woodwind instrument that cannot be played. Applied Acoustics, 143 pp. 84–99.

Bowen, J.; Cheneler, D. and Robinson, A. P. G. (2012). Direct e-beam lithography of PDMS. Microelectronic Engineering, 97 pp. 34–37.

Bowen, J.; Pettitt, M. E.; Kendall, K.; Leggett, G. J.; Preece, J. A.; Callow, M. E. and Callow, J. A. (2007). The influence of surface lubricity on the adhesion of Navicula perminuta and Ulva linza to alkanethiol self-assembled monolayers. Journal of The Royal Society Interface, 4(14) pp. 473–477.

Bowen, James and Cheneler, David (2012). A dynamic model of the jump-to phenomenon during AFM analysis. Langmuir, 28(50) pp. 17273–17286.

Bowen, James and Cheneler, David (2016). On the origin and magnitude of surface stresses due to metal nanofilms. Nanoscale, 8 pp. 4245–4251.

Bowen, James and Cheneler, David (2017). Selecting suitable image dimensions for scanning probe microscopy. Surfaces and Interfaces, 9 pp. 132–142.

Bowen, James and Cheneler, David (2019). The stability and degradation of PECVD fluoropolymer nanofilms. Polymer Degradation and Stability, 160 pp. 203–209.

Bowen, James and Cheneler, David (2020). Closed-Form Expressions for Contact Angle Hysteresis: Capillary Bridges between Parallel Platens. Colloids and Interfaces, 4(1), article no. 13.

Bowen, James; Cheneler, David and Adams, Michael J. (2013). Controlling thin liquid film viscosity via modification of substrate surface chemistry. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 418 pp. 112–116.

Bowen, James; Cheneler, David; Andrews, James W.; Avery, Andrew R.; Zhang, Zhibing; Ward, Michael C. L. and Adams, Michael J. (2011). Application of colloid probe atomic force microscopy to the adhesion of thin films of viscous and viscoelastic silicone fluids. Langmuir, 27(18) pp. 11489–11500.

Bowen, James; Cheneler, David; Walliman, Dominic; Arkless, Stuart G; Zhang, Zhibing; Ward, Michael C. L. and Adams, Michael J. (2010). On the calibration of rectangular atomic force microscope cantilevers modified by particle attachment and lamination. Measurement Science and Technology, 21(11), article no. 115106.

Bowen, James; Johnson, Simon A.; Avery, Andrew R. and Adams, Michael J. (2016). Friction and wear of human hair fibres. Surface Topography: Metrology and properties, 4, article no. 024008.

Bowen, James; Manickam, Mayandithevar; Evans, Stephen D.; Critchley, Kevin; Kendall, Kevin and Preece, Jon A. (2008). The pH-dependent adhesion of nanoparticles to self-assembled monolayers on gold. Thin Solid Films, 516(10) pp. 2987–2999.

Bowen, James; Manickam, Mayandithevar; Iqbal, Parvez; Evans, Stephen D.; Critchley, Kevin; Preece, Jon A. and Kendall, Kevin (2009). The adhesive properties of pyridine-terminated self-assembled monolayers. Thin Solid Films, 517(13) pp. 3806–3812.

Bowen, James; Rossetto, Hebert L. and Kendall, Kevin (2016). Adhesion between silica surfaces due to hydrogen bonding. Surface Topography: Metrology and Properties, 4(3) 034001.

Bowers, Lisa and Hayle, Ryan (2021). Creative haptics: an evaluation of a haptic tool for non-sighted and visually impaired design students, studying at a distance. British Journal of Visual Impairment, 39(3) pp. 214–230.

Bowers, Lisa Jane (2019). Touching creativity; a review and early pilot test of haptic tooling to support design practice, within a distance learning curriculum. Open Learning: The Journal of Open, Distance and e-Learning, 34(1) pp. 6–18.

Boyle, Godfrey (2007). Offshore wind: the potential to contribute a quarter of UK electricity by 2024. Wind Engineering, 31(2) pp. 65–74.

Boyle, Godfrey and Bentley, Roger (2008). Global oil depletion: forecasts and methodologies. Environment and Planning B, 35(4) pp. 609–626.

Boyle, Godfrey; Thomas, Christine and Wield, David (2000). Beyond single vision. Futures, 32(3-4) pp. 221–228.

Bracht, Hartmut and Chroneos, Alexander (2008). The vacancy in silicon: a critical evaluation of experimental and theoretical results. Journal of Applied Physics, 104(7), article no. 076108.

Brahma, Arindam; Ferguson, Scott; Eckert, Claudia and Isaksson, Ola (2023). Margins in design – review of related concepts and methods. Journal of Engineering Design [Early Access].

Bravo, Úrsula; Cortés, Catalina; Lloyd, Peter and Jones, Derek (2023). Using design thinking to explore teaching problems in Chilean schools. Reflective Practice, 24(6) pp. 784–805.

Bravo, Úrsula; Cortés, Catalina; Honorato, María Jesús; Rivera, Maritza; Ceric, Fransisco; Lloyd, Peter and Jones, Derek (2016). El diseño va al colegio: Oportunidades de Aplicación del Proceso de Diseño en la Educación Escolar Chilena [Design goes to school: Opportunities to apply the design process in Chilean school education]. Base : Diseño para la Educación del Siglo Xxi(2) pp. 228–241.

Brem, Alexander; Kongar, Elif; Eckert, Claudia; Santiago, Leonardo P. and Daim, Tugrul U. (2021). [Editorial] Publishing in Peer-Reviewed Journals. IEEE Transactions on Engineering Management, 68(1) pp. 5–10.

Bristow, Abigail L.; Enoch, Marcus P.; Zhang, Lian; Greensmith, Clare; James, Norman and Potter, Stephen (2008). Kickstarting growth in bus patronage: Targeting support at the margins. Journal of Transport Geography, 16(6) pp. 408–418.

Brown, Joshua K.; Rashwan, Tarek L. and Gerhard, Jason I. (2024). Hydrogen - rich syngas derived from smouldering biomass and hydrocarbon wastes. International Journal of Hydrogen Energy, 72 pp. 839–849.

Brown, F. E. and Johnson, J. H. (1985). An interactive computer model of urban development: the rules governing the morphology of mediaeval London. Environment and Planning B: Planning and Design, 12(4) pp. 377–400.

Bruce, Margaret; Potter, Stephen and Roy, Robin (1995). The risks and rewards of design investment. Journal of Marketing Management, 11 pp. 403–417.

Bruce, Margaret and Roy, Robin (1991). Integrating marketing and design for commercial benefit. Marketing Intelligence and Planning, 9(5) pp. 23–28.

Brunsting, Suzanne; Mastop, Jessanne; Kaiser, Marta; Zimmer, René; Shackley, Simon; Mabon, Leslie and Howell, Rhys (2015). CCS Acceptability: Social Site Characterization and Advancing Awareness at Prospective Storage Sites in Poland and Scotland. Oil & Gas Science and Technology – Revue d’IFP Energies nouvelles, 70(4) pp. 767–784.

Buick, J.M.; Kemp, J.; Sharp, D.B.; van Walstijn, M.; Campbell, D.M. and Smith, R.A. (2002). Distinguishing between similar tubular objects using pulse reflectometry: a study of trumpet and cornet leadpipes. Measurement Science and Technology, 13(5) pp. 750–757.

Burca, G.; James, J. A.; Kockelmann, W.; Fitzpatrick, M. E.; Zhang, S.Y.; Hovind, J. and van Langh, R. (2011). A new bridge technique for neutron tomography and diffraction measurements. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 651(1) pp. 229–235.

Burca, G.; Kockelmann, W.; James, J. A. and Fitzpatrick, M. E. (2013). Modelling of an imaging beamline at the ISIS pulsed neutron source. Journal of Instrumentation, 8(10), article no. P10001.

Burnett, T. L.; Geurts, R.; Jazaeri, H.; Northover, S. M.; McDonald, S. A.; Haigh, S. J.; Bouchard, P. J. and Withers, P. J. (2015). Multiscale 3D analysis of creep cavities in AISI type 316 stainless steel. Materials Science and Technology, 31(5) pp. 522–534.

Butt, K.R.; Lowe, C.N.; Frederickson, J. and Moffat, A.J. (2004). The development of sustainable earthworm populations at Calvert Landfill Site, UK. Land Degradation and Development, 15(1) pp. 27–36.

Butt, Kevin R.; Frederickson, James and Morris, Richard G. (1994). Effect of earthworm density on the growth and reproduction of Lumbricus terrestris L. (Oligochaeta: Lumbricidae) in culture. Pedobiologia, 38(3) pp. 254–261.

Buys, Kurijn; Sharp, David and Laney, Robin (2017). Developing and evaluating a hybrid wind instrument. Acta Acustica united with Acustica, 103(5) pp. 830–846.

Cai, Zhiming; Clarke, Richard H.; Glowacki, Bartek A.; Nuttall, William J. and Ward, Nick (2010). Ongoing ascent to the helium production plateau—insights from system dynamics. Resources Policy, 35(2) pp. 77–89.

Caird, Sally; Roy, Robin and Herring, Horace (2008). Improving the energy performance of UK households: Results from surveys of consumer adoption and use of low- and zero-carbon technologies. Energy Efficiency, 1(2) pp. 149–166.

Caird, Sally (1994). How important is the innovator for the commercial success of innovative products in SMEs? Technovation, 14(2) pp. 71–83.

Caird, Sally (1991). Testing enterprising tendency in occupational groups. British Journal of Management, 2(4) pp. 177–186.

Caird, Sally (1993). What do psychological tests suggest about entrepreneurs? Journal of Managerial Psychology, 8(6) pp. 11–20.

Caird, Sally (1990). What does it mean to be enterprising? British Journal of Management, 1(3) pp. 137–145.

Caird, Sally (1991). The enterprising tendency of occupational groups. International Small Business Journal, 9(4) pp. 75–81.

Caird, Sally (1990). Enterprise competencies: an agenda for research. Journal of European Industrial Training, 14(7) pp. 3–8.

Caird, Sally (1990). Enterprise education: the need for differentiation. British Journal of Education and Work, 4(1) pp. 47–57.

Caird, Sally (1991). Self assessments of participants on enterprise training courses. British Journal of Education and Work, 4(3) pp. 63–80.

Caird, Sally (1994). How do award winners come up with innovative ideas? Creativity and Innovation Management, 3(1) pp. 3–10.

Caird, Sally (2018). City approaches to smart city evaluation and reporting: case studies in the United Kingdom. Urban Research and Practice, 11(2) pp. 159–179.

Caird, Sally; Hallett, Stephen and Potter, Stephen (2013). The Open2-Innova8ion tool - a software tool for rating organisational innovation performance. Technovation: The International Journal of Technological Innovation, Entrepreneurship and Technology Management, 33(10-11) pp. 381–385.

Caird, Sally and Lane, Andrew (2013). Conceptualising the role of Information and Communication Technologies in the design of higher education teaching models used in the UK. British Journal of Educational Technology, 46(1) pp. 58–70.

Caird, Sally; Lane, Andy; Swithenby, Ed; Roy, Robin and Potter, Stephen (2015). Design of higher education teaching models and carbon impacts. International Journal of Sustainability in Higher Education, 16(1) pp. 96–111.

Caird, Sally and Roy, Robin (2006). Household ecological footprints - demographics and sustainability. Journal of Environmental Assessment Policy and Management, 8(4) pp. 407–429.

Caird, Sally and Roy, Robin (2008). User-centred improvements to energy efficiency products and renewable energy systems: research on household adoption and use. International Journal of Innovation Management, 12(3) pp. 327–355.

Caird, Sally and Roy, Robin (2010). Adoption and use of household microgeneration heat technologies. Low Carbon Economy, 1(2) pp. 61–70.

Caird, Sally; Roy, Robin and Potter, Stephen (2012). Domestic heat pumps in the UK: user behaviour, satisfaction and performance. Energy Efficiency, 5(3) pp. 283–301.

Caird, Sally; Roy, Robin and Wield, David (1994). Problems Experienced by Engineers with Environmental Product Development Projects. Technology Analysis and Strategic Management, 6(2) pp. 177–188.

Caird, Sally; Roy, Robin and Wield, David (1997). Team approaches to developing innovative projects and processes. International Journal of Innovation Management, 1(4) pp. 333–354.

Caird, Sally P. and Hallett, Stephen H. (2018). Towards evaluation design for smart city development. Journal of Urban Design, 24(2) pp. 188–209.

Calel, Raphael; Chapman, Sandra C.; Stainforth, David A. and Watkins, Nicholas W. (2020). Temperature variability implies greater economic damages from climate change. Nature Communications, 11, article no. 5028.

Calvert, Carol and Warren, James (2024). Towards practical learning using air quality monitors. MSOR Connections, 22(2) pp. 4–11.

Campbell, Anne; Gallen, Anne-Marie; Jones, Mark H. and Walshe, Ann (2019). The perceptions of STEM Tutors on the role of tutorials in distance learning. Open Learning: The Journal of Open, Distance and e-learning, 34(1) pp. 89–102.

Campoli, A.; Luck, R.; Shrestha, P.; Pradhan, P. and Rana, P. (2024). ‘It is not rocket science but it can change our lives’: pluriversal design with FabLab Nepal at a spinal injury clinic. CoDesign: International Journal of CoCreation in Design and the Arts (Early access).

Campoli, Alessandra (2015). A Ghostly Feminine Melancholy: Representing Decay And Experiencing Loss In Thai Horror Films. Plaridel, 12(2) pp. 14–35.

Campoli, Alessandra (2020). Art, Myth and Memory: An Investigation into the Relationship Between Ancient Myths, Collective and Cultural Memory and the Visual Arts. Visual Review: International Visual Culture Review, 7(2) pp. 199–206.

Campoli, Alessandra (2013). Edges: Written and Visual Reflections on Marginal Space and its Exploration. Interartive. A Platform for Contemporary Art and Thought, 55

Capparelli, V.; Franzke, C.; Vecchio, A.; Freeman, M. P.; Watkins, N. W. and Carbone, V. (2013). A spatiotemporal analysis of U.S. station temperature trends over the last century. Journal of Geophysical Research: Atmospheres, 118(14) pp. 7427–7434.

Caprotti, Federico; Cugurullo, Federico; Cook, Matthew; Karvonen, Andrew; Marvin, Simon; McGuirk, Pauline and Valdez, Alan-Miguel (2024). Why does urban Artificial Intelligence (AI) matter for urban studies? Developing research directions in urban AI research. Urban Geography (early access).

Cardin, Michel-Alexandre; Steer, Steven J.; Nuttall, William J.; Parks, Geoffrey T.; Gonçalves, Leonardo V.N. and de Neufville, Richard (2012). Minimizing the economic cost and risk to accelerator-driven subcritical reactor technology. Part 2: The case of designing for flexibility. Nuclear Engineering and Design, 243 pp. 120–134.

Cardin, Michel-Alexandre; Zhang, Sizhe and Nuttall, William J. (2017). Strategic Real Option and Flexibility Analysis for Nuclear Power Plants Considering Uncertainty in Electricity Demand and Public Acceptance. Energy Economics, 64 pp. 226–237.

Carlisle, Ysanne and McMillan, Elizabeth (2006). Innovation in organizations from a complex adaptive systems perspective. Emergence: Complexity and Organization, 8(1) pp. 2–9.

Carver, R.; Childs, J.; Steinberg, P.; Mabon, L.; Matsuda, H.; Squire, R.; McLellan, B. and Esteban, M. (2020). A critical social perspective on deep sea mining: Lessons from the emergent industry in Japan. Ocean & Coastal Management, 193, article no. 105242.

Cassar, Louis F.; Conrad, Elisabeth; Bell, Simon and Morse, Stephen (2013). Assessing the use and influence of sustainability indicators at the European periphery. Ecological Indicators, 35 pp. 52–61.

Castan Broto, Vanesa and Dewberry, Emma (2016). Economic crisis and social learning for the provision of public services in two Spanish municipalities. Journal of Cleaner Production, 112(4) pp. 3018–3027.

Castán Broto, Vanesa; Glendinning, Stephanie; Dewberry, Emma; Walsh, Claire and Powell, Mark (2014). What can we learn about transitions for sustainability from infrastructure shocks? Technological Forecasting and Social Change, 84 pp. 186–196.

Catulli, Maurizio; Potter, Stephen and Cook, Matthew (2021). Is it who you are or what you do? Insights for Mobility as a Service from research on a car club. Research in Transportation Business & Management, 41, article no. 100597.

Catulli, Maurizio; Cook, Matthew and Potter, Stephen (2017). Consuming use orientated product service systems: A consumer culture theory perspective. Journal of Cleaner Production, 141 pp. 1186–1193.

Catulli, Maurizio; Cook, Matthew and Potter, Stephen (2017). Product Service Systems Users and Harley Davidson Riders: the importance of consumer identity in the diffusion of sustainable consumption solutions. Journal of Industrial Ecology, 21(5) pp. 1370–1379.

Cham, Karen (2007). Reconstruction Theory, Designing the Space of Possibility in Complex Media. International Journal of Performance Arts and Digital Media, 3(2-3) pp. 253–267.

Cham, Karen and Johnson, Jeffrey (2007). Complexity Theory: a Science of Cultural Systems? M/C Journal, 10:(3) pp. 21–34.

Chandler, Michael R.; Fauchille, Anne‐Laure; Kim, Ho Kyeom; Ma, Lin; Mecklenburgh, Julian; Rizzo, Roberto; Mostafavi, Mahmoud; Marussi, Sebastian; Atwood, Robert; May, Steven; Azeem, Mohammed; Rutter, Ernie; Taylor, Kevin and Lee, Peter (2018). Correlative Optical and X‐Ray Imaging of Strain Evolution During Double-Torsion Fracture Toughness Measurements in Shale. JGR Solid Earth, 123(12) 10,517-10,533.

Chandrabose, Gauthaman; Dey, Avishek; Gaur, Shivani Singh; Pitchaimuthu, Sudhagar; Jagadeesan, Hema; Braithwaite, N. St. John.; Selvaraj, Vimalnath; Kumar, Vasant and Krishnamurthy, Satheesh (2021). Removal and Degradation of Mixed Dye Pollutants by Integrated Adsorption-Photocatalysis Technique Using 2-D MoS2/TiO2 Nanocomposite. Chemosphere, 279, article no. 130467.

Chapman, A.; McLellan, B.; Mabon, L.; Yap, J.; Karmaker, S. C. and Sen, K. K. (2023). The Just Transition in Japan: Awareness and desires for the future. Energy Research & Social Science, 103, article no. 103228.

Chapman, S. C.; McIntosh, S. W.; Leamon, R. J. and Watkins, N. W. (2021). The Sun’s Magnetic (Hale) Cycle and 27 Day Recurrences in the aa Geomagnetic Index. The Astrophysical Journal, 917(2), article no. 54.

Chapman, S. C.; Dendy, R. O.; Todd, T. N.; Watkins, N. W.; Calderon, F. A. and Morris, J. (2015). The global build-up to intrinsic edge localized mode bursts seen in divertor full flux loops in JET. Physics of Plasmas, 22(7), article no. 072506.

Chapman, S. C.; Dendy, R. O.; Todd, T. N.; Watkins, N. W.; Webster, A. J.; Calderon, F. A. and Morris, J. (2014). Relationship of edge localized mode burst times with divertor flux loop signal phase in JET. Physics of Plasmas, 21(6), article no. 062302.

Chapman, S. C.; Horne, R. B. and Watkins, N. W. (2020). Using the aa index over the last 14 solar cycles to characterize extreme geomagnetic activity. Geophysical Research Letters, 47(3), article no. e2019GL086524.

Chapman, S. C.; Lang, P. T.; Dendy, R. O.; Giannone, L.; Watkins, N. W. and ASDEX Upgrade Team (2018). Control system-plasma synchronization and naturally occurring edge localized modes in a tokamak. Physics of Plasmas, 25(6), article no. 062511.

Chapman, S. C.; McIntosh, S. W.; Leamon, R. J. and Watkins, N. W. (2020). Quantifying the Solar Cycle Modulation of Extreme Space Weather. Geophysical Research Letters, 47(11), article no. e2020GL087795.

Chapman, S. C.; Murphy, E. J.; Stainforth, D. A. and Watkins, N.W. (2020). Trends in Winter Warm Spells in the Central England Temperature Record. Journal of Applied Meteorology and Climatology, 59(6) pp. 1069–1076.

Chapman, S. C.; Stainforth, D. A. and Watkins, N. W. (2013). On estimating local long-term climate trends. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 371(1991), article no. 20120287.

Chapman, S. C.; Watkins, N. W. and Tindale, E. (2018). Reproducible aspects of the climate of space weather over the last five solar cycles. Space Weather, 16(8) pp. 1128–1142.

Chapman, S. C.; Watkins, Nicholas and Stainforth, D. A. (2019). Warming trends in summer heatwaves. Geophysical Research Letters, 46(3) pp. 1634–1640.

Chapman, Sandra C.; Stainforth, David A. and Watkins, Nicholas W. (2015). Limits to the quantification of local climate change. Environmental Research Letters, 10(9), article no. 094018.

Chataway, Joanna; Hanlin, Rebecca; Mugwagwa, Julius and Muraguri, Lois (2010). Global health social technologies: reflections on evolving theories and landscapes. Research Policy, 39(10) pp. 1277–1288.

Chaturvedi, Kalpana and Chataway, Joanna (2006). Strategic integration of knowledge in Indian pharmaceutical firms: creating competencies for innovation. International Journal of Business Innovation and Research, 1(1-2) pp. 27–50.

Chaturvedi, Kalpana; Chataway, Joanna and Wield, David (2007). Policy, markets and knowledge: strategic synergies in Indian pharmaceutical firms. Technology Analysis and Strategic Management, 19(5) pp. 565–588.

Chau, Hau Hing; McKay, Alison; Earl, Christopher F.; Behera, Amar Kumar and de Pennington, Alan (2018). Exploiting lattice structures in shape grammar implementations. Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 32(2) pp. 147–161.

Chen, BingJin; Lourembam, James; Goolaup, Sarjoosing and Lim, Sze Ter (2019). Field-free spin-orbit torque switching of a perpendicular ferromagnet with Dzyaloshinskii-Moriya interaction. Applied Physics Letters, 114(2), article no. 022401.

Cheneler, D.; Bowen, J.; Leigh, S. J.; Purssell, C. P.; Billson, D. R.; Hutchins, D. A. and Ward, M. C. L. (2011). Fabrication and analysis of cylindrical resin AFM microcantilevers. Ultramicroscopy, 111(8) pp. 1214–1223.

Cheneler, D.; Bowen, J.; Ward, M. C. L. and Adams, M. J. (2011). Micro squeeze flow rheometer for high frequency analysis of nano-litre volumes of viscoelastic fluid. Microelectronic Engineering, 88(8) pp. 1726–1729.

Cheneler, D.; Bowen, J.; Ward, M. C. L. and Adams, M. J. (2011). Principles of a micro squeeze flow rheometer for the analysis of extremely small volumes of liquid. Journal of Micromechanics and Microengineering, 21(4), article no. 045030.

Cheneler, David and Bowen, James (2013). Degradation of polymer films. Soft Matter, 9(2) pp. 344–358.

Cheneler, David; Bowen, James; Evans, Stephen D.; Górzny, Marcin; Adams, Michael J. and Ward, Michael C.L. (2011). Characteristics and durability of fluoropolymer thin films. Polymer Degradation and Stability, 96(4) pp. 561–565.

Cheneler, David; Bowen, James and Kaklamani, Georgia (2014). Transient bioimpedance monitoring of mechanotransduction in artificial tissue during indentation. Journal of Electrical Bioimpedance, 5(1) pp. 55–73.

Cheneler, David; Mehrban, Nazia and Bowen, James (2013). Spherical indentation analysis of stress relaxation for thin film viscoelastic materials. Rheologica Acta, 52(7) pp. 695–706.

Cherif, Yassine; Azzi, Hajer; Sridharan, Kishore; Ji, Seulgi; Choi, Heechae; Allan, Michael G.; Benaissa, Sihem; Saidi-Bendahou, Karima; Damptey, Lois; Ribeiro, Camila; Krishnamurthy, Satheesh; Nagarajan, Sanjay; Maroto-Valer, M. Mercedes; Kuehnel, Moritz F. and Pitchaimuthu, Sudhagar (2023). Facile Synthesis of Gram-Scale Mesoporous Ag/TiO2 Photocatalysts for Pharmaceutical Water Pollutant Removal and Green Hydrogen Generation. ACS Omega(8) pp. 1249–1261.

Chico-Santamarta, Leticia; Chaney, Keith; Godwin, Richard John; White, David Richard and Humphries, Andrea Claire (2012). Physical quality changes during the storage of canola (Brassica napus L.) straw pellets. Applied Energy, 95 pp. 220–226.

Chico-Santamarta, Leticia; Godwin, Richard John; Chaney, Keith; White, David Richard and Humphries, Andrea Claire (2013). On-farm storage of baled and pelletized canola (Brassica napus L.) straw: Variations in the combustion related properties. Energy, 50 pp. 429–437.

Chico-Santamarta, Leticia; Patel, Andrea Claire; Chaney, Keith; White, David Richard; Magan, Naresh and Godwin, Richard John (2011). Microbial changes during the on-farm storage of canola (oilseed rape) straw bales and pellets. Biomass and Bioenergy, 35(7) pp. 2939–2949.

Chilton, Tom; Burnley, Stephen and Nesaratnam, Suresh (2010). A life cycle assessment of the closed-loop recycling and thermal recovery of post-consumer PET. Resources, Conservation and Recycling, 54(12) pp. 1241–1249.

Chong, Kok Boon and Fitzpatrick, Michael E. (2017). Evolution of stress fields and phase content in corroded zirconium cladding materials. Surface and Coatings Technology, 324 pp. 140–145.

Chowdhury, F.; Rashwan, T. L.; Mondal, P.; Behazin, M.; Keech, P. G.; Sharma, J. S. and Krol, M. (2024). Effect of compaction on bisulfide diffusive transport through MX-80 bentonite. Journal of Contaminant Hydrology, 264, article no. 104341.

Chroneos, A. (2010). Dopant-vacancy cluster formation in germanium. Journal of Applied Physics, 107(7), article no. 076102.

Chroneos, A. and Bracht, H. (2008). Concentration of intrinsic defects and self-diffusion in GaSb. Journal of Applied Physics, 104(9), article no. 093714.

Chroneos, A.; Bracht, H.; Grimes, R. W. and Uberuaga, B. P. (2008). Vacancy-mediated dopant diffusion activation enthalpies for germanium. Applied Physics Letters, 92(17) p. 172103.

Chroneos, A.; Bracht, H.; Grimes, R. W. and Uberuaga, B. P. (2008). Phosphorous clustering in germanium-rich silicon germanium. Materials Science and Engineering B, 154-55 pp. 72–75.

Chroneos, A.; Bracht, H.; Jiang, C. and Uberuaga, B. P. (2008). Nonlinear stability of E centers in Si1-xGex: electronic structure calculations. Physical Review B, 78(19) p. 195201.

Chroneos, A. and Dimoulas, A. (2012). Defect configurations of high-k cations in germanium. Journal of Applied Physics, 111(2), article no. 023714.

Chroneos, A.; Grimes, R. W. and Bracht, H. (2009). Impact of germanium on vacancy clustering in germanium-doped silicon. Journal of Applied Physics, 105(1), article no. 016102.

Chroneos, A.; Grimes, R. W. and Bracht, H. (2009). Fluorine codoping in germanium to suppress donor diffusion and deactivation. Journal of Applied Physics, 106(6), article no. 063707.

Chroneos, A.; Grimes, R. W.; Bracht, H. and Uberuaga, B. P. (2008). Engineering the free vacancy and active donor concentrations in phosphorus and arsenic double donor-doped germanium. Journal of Applied Physics, 104(11), article no. 113724.

Chroneos, A.; Grimes, R. W.; Uberuaga, B. P. and Bracht, H. (2008). Diffusion and defect reactions between donors, C, and vacancies in Ge. II. Atomistic calculations of related complexes. Physical Review B (Condensed Matter and Material Physics), 77(23) p. 235208.

Chroneos, A.; Jiang, C.; Grimes, R. W. and Schwingenschlögl, U. (2010). Special quasirandom structures for binary/ternary group IV random alloys. Chemical Physics Letters, 493(1-3) pp. 97–102.

Chroneos, A.; Jiang, C.; Grimes, R. W.; Schwingenschlögl, U. and Bracht, H. (2009). E centers in ternary Si1-x-yGexSny random alloys. Applied Physics Letters, 95(11) p. 112101.

Chroneos, A.; Jiang, C.; Schwingenschlögl, U. and Bracht, H. (2009). Defect interactions in Sn1-xGex random alloys. Applied Physics Letters, 94(25) p. 252104.

Chroneos, A. and Londos, C. A. (2010). Interaction of A-centers with isovalent impurities in silicon. Journal of Applied Physics, 107(9), article no. 093518.

Chroneos, A.; Londos, C. A. and Sgourou, E. N. (2011). Effect of tin doping on oxygen- and carbon-related defects in Czochralski silicon. Journal of Applied Physics, 110(9), article no. 093507.

Chroneos, A.; Londos, C. A.; Sgourou, E. N. and Pochet, P. (2011). Point defect engineering strategies to suppress A-center formation in silicon. Applied Physics Letters, 99(24) p. 241901.

Chroneos, A.; Schwingenschlögl, U. and Dimoulas, A. (2012). Impurity diffusion, point defect engineering, and surface/interface passivation in germanium. Annalen der Physik, 524(3-4) pp. 123–132.

Chroneos, A.; Schwingenschlögl, U.; Schuster, C. and Grimes, R. W. (2012). Electronegativity and doping in semiconductors. Journal of Applied Physics, 112(4), article no. 046101.

Chroneos, A.; Tahini, A.; Grimes, R. W.; Schwingenschlogl, U. and Dimoulas, A. (2012). Strain-induced changes to the electronic structure of germanium. Journal of Physics: Condensed Matter, 24(19) p. 195802.

Chroneos, A.; Vovk, R. V.; Goulatis, I. L. and Goulatis, L. I. (2010). Oxygen transport in perovskite and related oxides: a brief review. Journal of Alloys and Compounds, 494(1-2) pp. 190–195.

Chroneos, Alexander (2009). Effect of germanium substrate loss and nitrogen on dopant diffusion in germanium. Journal of Applied Physics, 105(5), article no. 056101.

Chroneos, Alexander (2011). Effect of carbon on dopant-vacancy pair stability in germanium. Semiconductor Science and Technology, 26(9) 095017.

Chroneos, Alexander; Kube, R. V.; Bracht, H.; Grimes, R. W. and Schwingenschlögl, U. (2010). Vacancy-indium clusters in implanted germanium. Chemical Physics Letters, 490(1-3) pp. 38–40.

Chroneos, Alexander; Londos, C. A. and Bracht, H. (2011). A-centers and isovalent impurities in germanium: density functional theory calculations. Materials Science and Engineering B, 176(5) pp. 453–457.

Chroneos, Alexander; Parfitt, David; Kilner, John A. and Grimes, Robin W. (2010). Anisotropic oxygen diffusion in tetragonal La2NiO4+δ: molecular dynamics calculations. Journal of Materials Chemistry, 20(2) pp. 266–270.

Chroneos, Alexander; Yildiz, Bilge; Tarancon, Albert; Parfitt, David and Kilner, John A. (2011). Oxygen diffusion in solid oxide fuel cell cathode and electrolyte materials: mechanistic insights from atomistic simulations. Energy & Environmental Science, 4(8) pp. 2774–2789.

Chyong Chi, Kong; Nuttall, William J. and Reiner, David M. (2009). Dynamics of the UK natural gas industry: system dynamics modelling and long-term energy policy analysis. Technological Forecasting and Social Change, 76(3) pp. 339–357.

Clarke, Daniel John; Carter, Francesca; Jowers, Iestyn and Moat, Richard James (2023). An isotropic zero Poisson's ratio metamaterial based on the aperiodic ‘hat’ monotile. Applied Materials Today, 35, article no. 101959.

Clarke, Daniel John; Imediegwu, Chikwesiri; Moat, Richard and Jowers, Iestyn (2023). A systematic numerical and experimental study into the mechanical properties of five honeycombs. Composites Part B: Engineering, 264, article no. 110895.

Clarke, Daniel John; Moat, Richard and Jowers, Iestyn (2024). Identification of mechanically representative samples for aperiodic honeycombs. Materials Today Communications, 38, article no. 108505.

Clarkson, P.J.; Simons, C and Eckert, Claudia (2004). Predicting change propagation in complex design. Journal of Mechanical Design, 126(5) pp. 788–797.

Climate Change and Marginalised Communities Workshop (2020). Climate change, marginalised communities and considered debate within Scotland’s climate emergency. Scottish Geographical Journal, 136(1-4) pp. 41–48.

Collins, Kevin B. and Ison, Ray L. (2010). Trusting emergence: some experiences of learning about integrated catchment science with the Environment Agency of England and Wales. Water Resources Management, 24(4) pp. 669–688.

Collins, Kevin; Blackmore, Chris; Morris, Richard and Watson, Drennan (2007). A systemic approach to managing multiple perspectives and stakeholding in water catchments: some findings from three UK case studies. Environmental Science and Policy, 10(6) pp. 564–574.

Collins, Kevin; Colvin, John and Ison, Ray (2009). Building learning catchments for integrated catchment managing: Designing learning systems based on experiences in the UK and South Africa. Water Science & Technology, 59(4) pp. 687–693.

Collins, Kevin; Hannaford, Jamie; Svoboda, Mark; Knutson, Cody; Wall, Nicole; Bernadt, Tonya; Crossman, Neville; Overton, Ian; Acreman, Mike; Bachmair, Sophie and Stahl, Kerstin (2016). Stakeholder Co-inquiries on Drought Impacts, Monitoring and Early Warning Systems. Bulletin of the American Meteorological Society, 97(11) ES217-ES220.

Collins, Kevin and Ison, Ray (2009). Jumping off Arnstein's Ladder: Social learning as a new policy paradigm for climate change adaptation. Environmental Policy and Governance, 19(6) pp. 358–373.

Collins, Kevin and Ison, Ray (2009). Editorial: Living with environmental change: adaptation as social learning. Environmental Policy and Governance, 19(6) pp. 351–357.

Colvin, John; Blackmore, Chris; Chimbuya, Sam; Collins, Kevin; Dent, Mark; Goss, John; Ison, Ray; Roggero, Pier Paolo and Seddaiu, Giovanna (2014). In search of systemic innovation for sustainable development: a design praxis emerging from a decade of social learning inquiry. Research Policy, 43 pp. 760–771.

Conroy, Brian; Traore, Yeli; Paddea, Sanjooram; Kelleher, Joe and Tanner, David (2017). Application of multiple residual stress determination methods to coarse-grained biomedical implant castings. Materials Science and Technology, 33(10) pp. 1231–1251.

Cook, Matthew (2024). Investigating Digitally Inflected Intercity Cycle Commuting. Journal of Urban Technology, 31(1) pp. 93–108.

Cook, Matthew and Karvonen, Andrew (2023). Urban Planning and the Knowledge Politics of the Smart City. Urban Studies, 61(2) pp. 370–382.

Cook, Matthew and Valdez, Alan-Miguel (2021). Exploring smart city atmospheres: The case of Milton Keynes. Geoforum, 127 pp. 180–188.

Cook, Matthew and Valdez, Miguel (2023). Curating smart cities. Urban Geography, 44(6) pp. 1192–1210.

Cook, M. (2014). Fluid transitions to more sustainable product service systems. Environmental Innovation and Societal Transitions, 12 pp. 1–13.

Cook, M.; Gottberg, A.; Angus, A. and Longhurst, P. (2012). Receptivity to the production of product service systems in the UK construction and manufacturing sectors: a comparative analysis. Journal of Cleaner Production, 32 pp. 61–70.

Cook, M. B.; Bhamra, T. A. and Lemon, M. (2006). Transfer and application of product service systems: from academia to UK manufacturing firms. Journal of Cleaner Production, 14(17) pp. 1455–1465.

Cook, Matthew (2018). Product Service System Innovation in the Smart City. International Journal of Entrepreneurship and Innovation, 19(1) pp. 46–55.

Cook, Matthew (2019). [Book review] Inside smart cities: place, politics and urban environment. Local Environment, 24(6) pp. 554–555.

Cook, Matthew and Edensor, Tim (2017). Cycling through Dark Space: Apprehending the Landscape Otherwise. Mobilities, 12(1) pp. 1–19.

Cook, Matthew; Maggs, Huw; Neame, Charles and Lemon, Mark (2006). Service orientated product innovation for improved environmental performance: an exploratory case study of the air conditioning and cooling sector. Environmental Sciences, 3(3) pp. 193–206.

Cooke, Catherine (2003). Book Review of 'Central European avant-gardes: Exchange and transformation, 1910-1930' by Timothy O. Benson. Slavic Review, 62(2 Summer) pp. 367–368.

Cooke, Catherine (2003). Book Review of 'Architecture in the age of Stalin: Culture Two' by Vladimir Paperny. Slavonic and East European Review, 81(3) pp. 571–573.

Cooke, Catherine (2003). View from Moscow. Architectural Review, 213(1274) pp. 36–37.

Cooke, Catherine (2002). Review of video 'Visit to Russia: friends and places' by Leonid Shamshin, Zita Dabars, Joseph Liro and Renate Bialy. Slavic and East European Journal, 46(3) pp. 646–647.

Cormier, J.; Gadaud, P.; Czaplicki, M.; Zhang, R. Y.; Dong, H. B.; Smith, T. M.; Zhang, F.; Tiley, J. S. and Semiatin, S. L. (2021). In-Situ Determination of Precipitation Kinetics During Heat Treatment of Superalloy 718. Metallurgical and Materials Transactions A, 52(2) pp. 500–511.

Corrigan-Kavanagh, E.; Scarles, C.; Revill, G.; Beynon, M. and van Duppen, J. (2020). Explorations on the future of the book from the Next Generation Paper Project. Publishing History, 83 pp. 35–54.

Cree, A. M.; Hainsworth, S. V. and Weidmann, G. W. (2006). Strain-energy method for determining residual stresses in anodised thin films. Transactions of the Institute of Metal Finishing, 84(5) pp. 246–251.

Crilly, Michael; Lemon, Mark; Wright, Andrew J.; Cook, Matthew B. and Shaw, David (2012). Retrofitting homes for energy efficiency: an integrated approach to innovation in the low carbon overhaul of social housing. Energy and Environment, 23(6-7) pp. 1027–1056.

Crisan, A.; Dang, V. S.; Mikheenko, P.; Tse, Y. Y.; Sarkar, A.; Bowen, J. and Abell, J. S. (2009). Pinning potential in thick PrBa2Cu3Ox/YBa2Cu3O7−δ quasi-multilayers. Physica C, 470(1) pp. 55–60.

Crompton, Sally; Roy, Robin and Caird, Sally (2002). Household ecological footprinting for active distance learning and challenge of personal lifestyles. International Journal of Sustainability in Higher Education, 3(4) pp. 313–323.

Cross, Nigel (2001). Can a machine design? Design Issues, 17(4) pp. 44–50.

Cross, Nigel (1982). Designerly ways of knowing. Design Studies, 3(4) pp. 221–227.

Cross, Nigel (1990). The nature and nurture of design ability. Design Studies, 11(3) pp. 127–140.

Cross, Nigel (2023). Design thinking: What just happened? Design Studies, 86, article no. 101187.

Cross, Nigel and Clayburn Cross, Anita (1996). Winning by design: the methods of Gordon Murray, racing car designer. Design Studies, 17(1) pp. 91–107.

Cross, Nigel (2004). Expertise in design: an overview. Design Studies, 25(5) pp. 427–441.

Cross, Nigel (2001). Designerly ways of knowing: design discipline versus design science. Design Issues, 17(3) pp. 49–55.

Cross, Nigel (2001). Achieving pleasure from purpose: the methods of Kenneth Grange, product designer. Design Journal, 4(1) pp. 48–58.

Cross, Nigel (1999). Design Research: a disciplined conversation. Design Issues, 15(2) pp. 5–10.

Cross, Nigel (1999). Natural intelligence in design. Design Studies, 20(1) pp. 25–39.

Cross, Nigel (1997). Creativity in design: analyzing and modeling the creative leap. Leonardo, 30(4) pp. 311–317.

Cross, Nigel (1997). Descriptive models of creative design: application to an example. Design Studies, 18(4) pp. 427–440.

Cross, Nigel (2018). A brief history of the Design Thinking Research Symposium series. Design Studies, 57 pp. 160–164.

Cross, Nigel (2018). Developing design as a discipline. Journal of Engineering Design, 29(12) pp. 691–708.

Cross, Nigel (2019). Editorial: Design as a discipline. Design Studies, 65 pp. 1–5.

Cross, Nigel (1981). The Coming of Post-Industrial Design. Design Studies, 2(1) pp. 3–7.

Cross, Nigel and Holden, Georgina (2020). Design Education in the Open. Open Arts Journal, 1(9) pp. 149–161.

Crotty, James and Horrocks, Ivan (2017). Managing legacy system costs: A case study of a meta-assessment model to identify solutions in a large financial services company. Applied Computing and Informatics, 13(2) pp. 175–183.

Cuce, Erdem; Nachan, Zaid; Cuce, Pinar Mert; Sher, Farooq and Neighbour, Gareth (2017). Strategies for ideal indoor environments towards low/zero carbon buildings through a biomimetic approach. International Journal of Ambient Energy, 40(1) pp. 86–95.

Cugurullo, Federico; Caprotti, Federico; Cook, Matthew; Karvonen, Andrew; McGuirk, Pauline and Marvin, Simon (2024). The Rise of AI Urbanism in Post-Smart Cities: A Critical Commentary on Urban Artificial Intelligence. Urban Studies, 61(6) pp. 1168–1182.

Dada, Modupeola; Popoola, Patricia; Alao, Alice; Olalere, Folasayo; Mtileni, Evily; Lindokuhle, Ntanzi and Shamaine, Makinita (2023). Functional materials for solar thermophotovoltaic devices in energy conversion applications: a review. Frontiers in Energy Research, 11, article no. 1124288.

Damptey, Lois; Jaato, Bright N.; Ribeiro, Camila Silva; Varagnolo, Silvia; Power, Nicholas P.; Selvaraj, Vimalnath; Dodoo‐Arhin, David; Kumar, R. Vasant; Sreenilayam, Sithara Pavithran; Brabazon, Dermot; Kumar Thakur, Vijay and Krishnamurthy, Satheesh (2022). Surface Functionalized MXenes for Wastewater Treatment—A Comprehensive Review. Global Challenges, 6(6), article no. 2100120.

Dann, J.A.; Daymond, M.R.; Edwards, L.; James, J. and Santisteban, J.R. (2004). A comparison between Engin and Engin-X, a new diffractometer optimized for stress measurement. Physica B: Condensed Matter, 350(1-3) pp. 511–514.

Das, Yadunandan; Fernandez-Caballero, Antonio; Elmukashfi, Elsiddig; Jazaeri, Hedieh; Forsey, Alex; Hutchings, Michael T.; Schweins, Ralf and Bouchard, P. John (2022). Stress driven creep deformation and cavitation damage in pure copper. Materials Science and Engineering: A, 833, article no. 142543.

Das, Yadunandan; Liu, Jianling; Ehteshami, Hossein; Odqvist, Joakim; Holländer Pettersson, Niklas; Wessman, Sten; King, Stephen and Hedström, Peter (2021). Quantitative Nanostructure and Hardness Evolution in Duplex Stainless Steels: Under Real Low-Temperature Service Conditions. Metallurgical and Materials Transactions A, 53 pp. 723–735.

Das, Yadunandan; Liu, Jianling; Wessman, Sten; Xu, Xin; Odqvist, Joakim; King, Stephen and Hedström, Peter (2020). Small-angle neutron scattering quantification of phase separation and the corresponding embrittlement of a super duplex stainless steel after long-term aging at 300°C. Materialia, 12, article no. 100771.

Das, Yadunandan B.; Forsey, Alexander N.; Kelleher, Joe; Kabra, Saurabh; Fitzpatrick, Michael E.; Simm, Thomas H.; Gungor, Salih and Moat, Richard J. (2018). The influence of temperature on deformation-induced martensitic transformation in 301 stainless steel. Materials Science and Technology, 34(17) pp. 2114–2125.

Das, Yadunandan B.; Forsey, Alexander N.; Simm, Thomas H.; Perkins, Karen M.; Fitzpatrick, Michael E.; Gungor, Salih and Moat, Richard J. (2016). In situ observation of strain and phase transformation in plastically deformed 301 austenitic stainless steel. Materials & Design, 112 pp. 107–116.

Davison, Brian; Whyatt, Duncan and Boardman, Carl (2009). Aerosol evolution from a busy road in North-West England. Meteorologische Zeitschrift, 18(1) pp. 55–60.

Daymond, M. R. and Bouchard, P. J. (2006). Elastoplastic deformation of 316 stainless steel under tensile loading at elevated temperatures. Metallurgical and Materials Transactions A, 37(6) pp. 1863–1873.

Daymond, M.R. and Fitzpatrick, M.E. (2006). Effect of cyclic plasticity on internal stresses in a metal matrix composite. Metallurgical and Materials Transactions A, 37(6) pp. 1977–1986.

Demaid, A.; Ogden, S. and Zucker, J. (2006). Access Enhancement Objects for data management in Smalltalk. Computer Languages, Systems and Structures, 32(4) pp. 185–202.

Demaid, A. and Zucker, J. (2002). Message passing between individual and socially acquainted objects in Smalltalk. Knowledge-Based Systems, 15(7) pp. 355–368.

Demaid, Adrian and Quintas, Paul (2006). Knowledge across Cultures in the Construction Industry: Sustainability, Innovation & Design. Technovation, 26(5-6) pp. 603–610.

Denning, Peter J. and Johnson, Jeffrey (2021). Science is not another opinion. Communications of the ACM, 64(3) pp. 36–38.

Devlin-Mullin, Aine; Todd, Naomi M.; Golrokhi, Zahra; Geng, Hua; Hunt, John A.; Potter, Richard; Sutcliffe, Chris; Jones, Eric; Lee, Peter D. and Mitchel, Christopher A. (2017). Atomic Layer Deposition of a Silver Nanolayer on Advanced Titanium Orthopedic Implants Inhibits Bacterial Colonization and Supports Vascularized de Novo Bone Ingrowth. Advanced Healthcare Materials, 6(11), article no. 1700033.

Dewberry, E. L.; Cook, M; Gottberg, A; Longhurst, P. J. and Angus, A (2013). Critical Reflections on Designing Product Service Systems. The Design Journal, 16(4) pp. 408–430.

Dewberry, Emma (2003). Designing out crime: Insights from ecodesign. Security Journal, 16(1) pp. 51–62.

Dewberry, Emma and Goggin, Phillip (1996). Spaceship ecodesign. Co-Design: the interdisciplinary journal of design and contextual studies(5/6) pp. 12–17.

Dewberry, Emma and Monteiro de Barros, Margarida (2009). Exploring the need for more radical sustainable innovation: what does it look like and why? International Journal of Sustainable Engineering, 2(1) pp. 28–39.

Dewberry, Emma and Sherwin, Chris (2002). Visioning Sustainability through Design. Greener Management International(37) pp. 125–138.

Dey, A.; Chroneos, A.; Braithwaite, N. St. J.; Gandhiraman, Ram P. and Krishnamurthy, S. (2016). Plasma engineering of graphene. Applied Physics Reviews, 3(2), article no. 021301.

Dey, Avishek; Chandrabose, Gauthaman; Damptey, Lois A.O.; Erakulan, E.S.; Thapa, Ranjit; Zhuk, Siarhei; Dalapati, Goutam Kumar; Ramakrishna, Seeram; Braithwaite, Nicholas St. J.; Shirzadi, Amir and Krishnamurthy, Satheesh (2021). Cu2O/CuO heterojunction catalysts through atmospheric pressure plasma induced defect passivation. Applied Surface Science, 541, article no. 148571.

Dey, Avishek; Chandrabose, Gauthaman; Ghosh, Paheli; A. O. Damptey, Lois; Clark, Adam H.; Selvaraj, Vimalnath; Vasant Kumar, Ramachandran; Braithwaite, N St.J.; Zhuk, Siarhei; Dalapati, Goutam Kumar; Ramakrishna, Seeram and Krishnamurthy, Satheesh (2021). Atmospheric pressure plasma engineered superhydrophilic CuO surfaces with enhanced catalytic activities. Applied Surface Science, 564, article no. 150413.

Dey, Avishek; Ghosh, Paheli; Chandrabose, Gauthaman; Damptey, Lois A. O.; Kuganathan, Navaratnarajah; Sainio, Sami; Nordlund, Dennis; Selvaraj, Vimalnath; Chroneos, Alexander; Braithwaite, Nicholas St.J. and Krishnamurthy, Satheesh (2021). Ultrafast epitaxial growth of CuO nanowires using atmospheric pressure plasma with enhanced electrocatalytic and photocatalytic activities. Nano Select, 3(3) pp. 627–642.

Dey, Avishek; Krishnamurthy, Satheesh; Bowen, James; Nordlund, Dennis; Meyyappan, M. and Gandhiraman, Ram P. (2018). Plasma Jet Printing and in Situ Reduction of Highly Acidic Graphene Oxide. ACS Nano, 12(6) pp. 5473–5481.

Dey, Avishek; Varagnolo, Silvia; Power, Nicholas; Vangapally, Naresh; Elias, Yuval; Damptey, Lois; Jaato, Bright N.; Gopalan, Saianand; Golrokhi, Zahra; Sonar, Prashant; Selvaraj, Vimalnath; Aurbach, Doron and Krishnamurthy, Satheesh (2023). Doped MXenes—A new paradigm in 2D systems: Synthesis, properties and applications. Progress in Materials Science, 139, article no. 101166.

Dey, Avishek; Ghosh, Paheli; Bowen, James; Braithwaite, N St.J and Krishnamurthy, Satheesh (2020). Engineering work function of graphene oxide from p to n type using a low power atmospheric pressure plasma jet. Physical Chemistry Chemical Physics, 22(15) pp. 7685–7698.

Ding, Rengen; Chiu, Yulung; Chu, Mingqiang; Paddea, Sanjooram and Su, Guanqiao (2020). A study of fracture behaviour of gamma lamella using the notched TiAl micro-cantilever. Philosophical Magazine. Part A: Materials Science, 100(8) pp. 982–997.

Dinovitser, Alex; Valchev, Dimitar G. and Abbott, Derek (2017). Terahertz time-domain spectroscopy of edible oils. Royal Society Open Science, 4(6), article no. 170275.

Dolan, T.; Cook, M. B. and Angus, A. J. (2011). Financial appraisal of wet mesophilic AD technology as a renewable energy and waste management technology. Science of the Total Environment, 409(13) pp. 2460–2466.

Domínguez, Ana; Pacho, Guillermo; Bowers, Lisa; Wild, Fridolin; Alcock, Sarah; Chiazzese, Giuseppe; Farella, Mariella; Arrigo, Marco; Ross, David; Treacy, Rita; Yegorina, Darya; Mangina, Eleni and Masneri, Stefano (2023). Dataset of user interactions across four large pilots on the use of augmented reality in learning experiences. Scientific Data, 10, article no. 823.

Dong, P.; Hong, J. K. and Bouchard, P. J. (2005). Analysis of residual stresses at weld repairs. International Journal of Pressure Vessels and Piping, 82(4) pp. 258–269.

Dong, P.; Zhang, J. and Bouchard, P. J. (2002). Effects of repair weld length on residual stress distribution. Journal of Pressure Vessel Technology, 124(1) pp. 74–80.

Dorman, M.; Toparli, M. B.; Smyth, N.; Cini, A.; Fitzpatrick, M. E. and Irving, P. E. (2012). Effect of laser shock peening on residual stress and fatigue life of clad 2024 aluminium sheet containing scribe defects. Materials Science and Engineering: A, 548 pp. 142–151.

Dorst, Kees and Cross, Nigel (2001). Creativity in the design process: co-evolution of problem–solution. Design Studies, 22(5) pp. 425–437.

Dostaler, Isabelle; Oliver, Nick and Dewberry, Emma (2004). Le developpement de nouveaux produits: une comparaison des pratiques japonaises, britanniques et nord-americaines. Gestion, 28(4) pp. 7–18.

Dougan, Sylvia (2006). Sustainable Construction in a flood of regulation. Building for a Future, 16(1) pp. 56–59.

Dougan, Sylvia (2005). Building what people want. Building for a Future, 14(4) pp. 30–35.

Dougan, Sylvia (1998). Building Sustainability. Building for a Future, 8(2) pp. 39–43.

Dougan, Sylvia (2006). Modernism and Utopianism: Brave new world or just pipe dreams. Building for a Future, 16(3) pp. 56–59.

Dougan, Sylvia (2007). Zero Carbon at the BRE. Green Building, 17(3)

Dove, Edward S.; Barlas, İ. Ömer; Birch, Kean; Boehme, Catharina; Borda-Rodriguez, Alexander; Byne, William M.; Chaverneff, Florence; Coşkun, Yavuz; Dahl, Marja-Liisa; Dereli, Türkay; Diwakar, Shyam; Elbeyli, Levent; Endrenyi, Laszlo; Eroğlu-Kesim, Belgin; Ferguson, Lynnette R.; Güngör, Kıvanç; Gürsoy, Ulvi; Hekim, Nezih; Huzair, Farah; Kaushik, Kabeer; Kickbusch, Ilona; Kıroğlu, Olcay; Kolker, Eugene; Könönen, Eija; Lin, Biaoyang; Llerena, Adrian; Malhan, Faruk; Nair, Bipin; Patrinos, George P.; Şardaş, Semra; Sert, Özlem; Srivastava, Sanjeeva; Steuten, Lotte M.G.; Toraman, Cengiz; Vayena, Effy; Wang, Wei; Warnich, Louise and Özdemir, Vural (2015). An appeal to the global health community for a tripartite innovation: an ‘‘Essential Diagnostics List,’’ ‘‘Health in All Policies,’’ and ‘‘See-Through 21st Century Science and Ethics". OMICS: A Journal of Integrative Biology, 19(8) pp. 435–442.

Durodola, J. F.; Parikh, T. S.; Fellows, N. A. and Gungor, S. (2014). An etching based axisymmetric solution for the determination of residual stresses in long fibre reinforced metal matrix composites. Journal of Composite Materials, 48(19) pp. 2375–2386.

Dutta, M.; Bruno, G.; Edwards, L. and Fitzpatrick, M.E. (2004). Neutron diffraction measurement of the internal stresses following heat treatment of a plastically deformed Al/SiC particulate metal-matrix composite. Acta Materialia, 52(13) pp. 3881–3888.

D’Elia, C. R.; Carlone, P.; Dyer, J. W.; Lévesque, J. B.; de Oliveira, J. Araújo; Prime, M. B.; Roy, M. J.; Spradlin, T. J.; Stilwell, R.; Tucci, F.; Vasileiou, A. N.; Watanable, B. T. and Hill, M. R. (2022). Interlaboratory Reproducibility of Contour Method Data in a High Strength Aluminum Alloy. Experimental Mechanics, 62(8) pp. 1319–1331.

Earl, Chris (2017). [Book Review] Adam Sharr and Stephen Thornton, Demolishing Whitehall: Leslie Martin, Harold Wilson and the architecture of white heat. Farnham, Surrey: Ashgate, 2013. Environment and Planning B: Planning and Design, 44(1) pp. 180–181.

Earl, Chris (2018). [Obituary] Lionel March: Sharing ideas through research. Environment and Planning B: Urban Analytics and City Science, 45(4) 598 -600.

Earl, Christopher F. and Jowers, Iestyn (2015). Pinwheel patterns: from 2D to 3D schemas. Nexus Network Journal, 17(3) pp. 899–912.

Eckert, Claudia; Crommentuijn-Marsh, Philippa and Black, Sandy (2022). The role of networks in supporting micro- and small-sized sustainable fashion businesses. Sustainability: Science, Practice and Policy, 18(1) pp. 544–559.

Eckert, Claudia and Hillerbrand, Rafaela (2022). Models in Engineering Design as Decision-Making Aids. Engineering Studies, 14(2) pp. 134–157.

Eckert, Claudia; Isaksson, Ola; Hane-Hagström, Malin and Eckert, Calandra (2022). My facts are not your facts: data wrangling as a socially negotiated process, a case study in a multisite manufacturing company. Journal of Computing and Information Science in Engineering, 22(6), article no. 060906.

Eckert, Claudia and Luo, Jianxi (2022). Guest Editorial: Innovation in Design Processes. IEEE Transactions on Engineering Management, 69(4) pp. 1532–1536.

Eckert, C. M.; Blackwell, A. F.; Bucciarelli, L. L. and Earl, C. F. (2010). Shared conversations across design. Design Issues, 26(3) pp. 27–39.

Eckert, C. M.; Keller, R. and Clarkson, P. J. (2011). Change prediction in innovative products to avoid emergency innovation. International Journal of Technology Management, 55(3/4) pp. 226–237.

Eckert, Claudia (2001). The communication bottleneck in knitwear design: Analysis and computing solutions. Computer Supported Cooperative Work, 10(1) pp. 29–74.

Eckert, Claudia (1999). Managing effective communication in knitwear design. Design Journal, 2(3) pp. 29–41.

Eckert, Claudia (1999). Computer support for early design in aesthetic design domains Cognitive Systems. Cognitive Systems, 5(3) pp. 271–290.

Eckert, Claudia (2013). That which is not form: the practical challenges in using functional concepts in design. Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 27(3) pp. 217–231.

Eckert, Claudia; Alink, Thomas; Ruckpaul, Anne and Albers, Albert (2011). Different notions of function: results from an experiment on the analysis of an existing product. Journal of Engineering Design, 22(11-12) pp. 811–837.

Eckert, Claudia; Blackwell, Alan; Stacey, Martin; Earl, Christopher and Church, Luke (2012). Sketching across design domains: roles and formalities. Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 26(3) pp. 245–266.

Eckert, Claudia and Boujut, Jean-François (2003). The role of objects in design co-operation: communication through physical or virtual objects. Computer Supported Cooperative Work, 12(2) pp. 145–151.

Eckert, Claudia; Clarkson, P. and Zanker, Winfried (2004). Change and customisation in complex engineering domains. Research in Engineering Design, 15(1) pp. 1–21.

Eckert, Claudia and Demaid, Adrian (2001). Classifying Design and Design Management in Seasonal Industries. International Journal of Innovation Management, 5(4) pp. 401–425.

Eckert, Claudia; Isaksson, Ola and Earl, Chris (2019). Design Margins: A hidden issue in industry. Design Science, 5, article no. e9.

Eckert, Claudia; Isaksson, Ola; Eckert, Calandra; Coeckelbergh, Mark and Hagström, Malin Hane (2020). Data Fairy in Engineering Land: The Magic of Data Analysis as a Sociotechnical Process in Engineering Companies. Journal of Mechanical Design, 142(12), article no. 121402.

Eckert, Claudia; Isaksson, Ola; Lebjioui, Safaa; Earl, Christopher and Edlund, Stefan (2020). Design margins in industrial practice. Design Science, 6, article no. e30.

Eckert, Claudia and Jankovic, Marija (2016). System architecture design. Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 30 pp. 214–216.

Eckert, Claudia; Kelly, Ian and Stacey, Martin (1999). Interactive generative systems for conceptual design: an empirical perspective. Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 13(4) pp. 303–320.

Eckert, Claudia; Ruckpaul, Anne; Alink, Thomas and Albers, Albert (2012). Variations in functional decomposition for an existing product: experimental results. Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 26(2) pp. 107–128.

Eckert, Claudia and Stacey, M. K. (1998). Fortune favours only the prepared mind: Why sources of inspiration are essential for continuing creativity. Creativity and Innovation Management, 7(1) pp. 9–16.

Eckert, Claudia; Stacey, M. K. and Wiley, J. (2002). Expertise and Creativity in Knitwear Design. International Journal of New Product Development and Innovation Management, 4(1) pp. 49–64.

Eckert, Claudia and Stacey, Martin (2003). Adaptation of Sources of Inspiration in Knitwear Design. Creativity Research Journal, 15(4) pp. 355–384.

Eckert, Claudia and Stacey, Martin (2003). Sources of Inspiration in Industrial Practice. The Case of Knitwear Design. Journal of Design Research, 3(1) doi:10.1504/JDR.2003.009826.

Eckert, Claudia and Stacey, Martin (2000). Sources of inspiration: a language of design. Design Studies, 21(5) pp. 523–538.

Eckert, Claudia; Stacey, Martin and Earl, Christopher (2013). Formality in design communication. Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 27(2) pp. 91–103.

Eckert, Claudia and Zolghadri, Marc (2010). Editorial. International Journal of Product Development, 12(1) pp. 1–5.

Eckert, Claudia M. and Bez, Helmut E. (2000). A garment design system using constrained Bézier curves. International Journal of Clothing Science and Technology, 12(2) pp. 134–143.

Eckert, Claudia M. and Clarkson, P. John (2010). Planning development processes for complex products. Research in Engineering Design, 21(3) pp. 153–171.

Eckert, Claudia M.; Cross, Nigel and Johnson, Jeffrey H. (2000). Intelligent support for communication in design teams: garment shape specifications in the knitwear industry. Design Studies, 21(1) pp. 99–112.

Eckert, Claudia M.; Keller, Rene; Earl, Chris and Clarkson, P. John (2006). Supporting change processes in design: Complexity, prediction and reliability. Reliability Engineering and System Safety, 91(12) pp. 1521–1534.

Eckert, Claudia M.; Wynn, David C.; Maier, Jakob F.; Albers, Albert; Bursac, Nikola; Xin Chen, Hilario L.; Clarkson, P. John; Gericke, Kilian; Gladysz, Bartosz and Shapiro, Daniel (2017). On the integration of product and process models in engineering design. Design Science, 3 pp. 1–41.

Edmonds, Bruce; Norling, Emma and Hales, David (2009). Towards the evolution of social structure. Computational & Mathematical Organization Theory (CMOT), 15(2) pp. 78–94.

Edwards, L; Fitzpatrick, M. E.; Irving, P. E.; Sinclair, I; Zhang, X and Yapp, D (2005). An integrated approach to the determination and consequences of residual stress on the fatigue performance of welded aircraft structures. Journal of ASTM International

Edwards, L.; Bouchard, P.J.; Dutta, M.; Wang, D.Q.; Santisteban, J.R.; Hiller, S. and Fitzpatrick, M.E. (2005). Direct measurement of the residual stresses near a 'boat-shaped' repair in a 20 mm thick stainless steel tube butt weld. International Journal of Pressure Vessels and Piping, 82(4) pp. 288–298.

Edwards, Lyndon; Smith, Mike C.; Turski, Mark; Fitzpatrick, Mike E and Bouchard, P. John (2008). Advances in residual stress modeling and measurement for the structural integrity assessment of welded thermal power plant. Advanced Materials Research, 41-42 pp. 391–400.

El Aziz, Youssef; Mehrban, Nazia; Taylor, Peter G.; Birchall, Martin A.; Bowen, James; Bassindale, Alan R.; Pitak, Mateusz B. and Coles, Simon J. (2017). Facile synthesis of novel hybrid POSS biomolecules via “Click” reactions. RSC Advances, 7(59) pp. 37474–37477.

Elcoate, C. D.; Dennis, R. J.; Bouchard, P. J. and Smith, M. C. (2005). Three dimensional multi-pass repair weld simulations. International Journal of Pressure Vessels and Piping, 82(4) pp. 244–257.

Elliott, David (2006). Energy regime choices: nuclear or not? Technology Analysis and Strategic Management, 18(5) pp. 445–450.

Elliott, David (2009). Marine renewables: a new innovation frontier. Technology Analysis and Strategic Management, 21(2) pp. 267–275.

Elliott, Dave (2004). Energy efficiency and renewables. Energy and Environment, 15(6) pp. 1099–1105.

Elliott, Dave and Cook, Terry (2004). Symbolic power: the future of nuclear energy in Lithuania. Science as Culture, 13(3) pp. 373–400.

Elliott, David (2013). Emergence of European supergrids: essay on strategy issues. Energy Strategy Reviews, 1(3) pp. 171–173.

Elliott-Bowman, B.; Cook, A. C.; Brown, P. and Qin, R. S. (2014). Electrothermomechanical processing of high carbon steels. Advanced Materials Research, 922 pp. 132–136.

Elliott-Bowman, Bernadette; Cook, Alexander C.; Brown, Peter; Dye, David and Qin, Rongshan (2016). Altering the Microstructure of Pearlitic Steel Using Pulsed Electric Current. Advanced Materials Research, 1139 pp. 3–6.

Ellis, Elaine; Fortune, Joyce and Peters, Geoff (2007). Partnership problems: analysis and re-design. Crime Prevention and Community Safety, 9(1) pp. 34–51.

Ellis, Jane and Peake, Stephen (1996). Renewable energy promotion in IEA countries. Renewable Energy, 9(1-4) pp. 1175–1178.

Elsayed, A.; Mahmoud, S.; Al-Dadah, R.; Bowen, J. and Kaialy, W. (2014). Experimental and numerical investigation of the effect of pellet size on the adsorption characteristics of activated carbon/ethanol. Energy Procedia, 61 pp. 2327–2330.

Elsayed, Eman; Wang, Haiyan; Anderson, Paul A.; Al-Dadah, Raya; Mahmoud, Saad; Navarro, Helena; Ding, Yulong and Bowen, James (2017). Development of MIL-101(Cr)/GrO Composites for adsorption heat pump applications. Microporous and Mesoporous Materials, 244 pp. 180–191.

Endean, Mark; Weidmann, George; Armstrong, David; Moffatt, Jim and Nixon, Tony (2008). Team project work for distance learners in engineering – challenges and benefits. Engineering Education, 3(2) pp. 11–20.

Engel, Christian; Goolaup, Sarjoosing; Luo, Feilong and Lew, Wen Siang (2017). Quantitative characterization of spin-orbit torques in Pt/Co/Pt/Co/Ta/BTO heterostructures due to the magnetization azimuthal angle dependence. Physical Review B, 96(5), article no. 054407.

Enoch, Marcus and Potter, Stephen (2023). MaaS (Mobility as a Service) market futures explored. Transport Policy, 134 pp. 31–40.

Enoch, Marcus and Warren, James (2020). Coronavirus is a once in a lifetime chance to reshape how we travel. The Conversation

Enoch, Marcus and Warren, James P. (2022). Looking through a windscreen: managing the future of automobility. Applied Mobilites, 7(1) pp. 81–98.

Enoch, Marcus P.; Warren, James and Dal Bosco Jr., Alceu (2021). Ticketing artefacts and designing fare collection systems. Transport Findings pp. 1–8.

Enoch, Marcus P. and Warren, James P. (2008). Automobile use within selected island states. Transportation Research Part A: Policy and Practice, 42(9) pp. 1208–1219.

Enoch, M.; Potter, S.; Ison, S. and Humphries, I. (2004). Role of Hypothecation in financing transit: lessons from the United Kingdom. Transportation Research Record(1864) pp. 31–37.

Enoch, M. P. and Warren, J. P. (2003). Necessity nudges Cuba towards a less transport intensive society. Traffic Engineering & Control, 44(8) pp. 278–281.

Enoch, M.P.; Cross, R.; Potter, N.; Davidson, C.; Taylor, S.; Brown, R.; Huang, H.; Parsons, J.; Tucker, S.; Wynne, E.; Grieg, D.; Campbell, G.; Jackson, A. and Potter, S. (2020). Future local passenger transport system scenarios and implications for policy and practice. Transport Policy, 90 pp. 52–67.

Enoch, Marcus and Potter, Stephen (2003). Encouraging the commercial sector to help employees to change their travel behaviour. Transport Policy, 10(1) pp. 51–58.

Enoch, Marcus and Potter, Stephen (2002). Marketing the British bus industry. Proceedings of the Institution of Civil Engineers - Municipal engineer, 151(1) pp. 49–55.

Enoch, Marcus; Potter, Stephen and Ison, Stephen (2005). A Strategic approach to financing public transport through property values. Public Money and Management, 25(3) pp. 147–154.

Enoch, Marcus; Warren, James P.; Valdes Rios, Humberto and Henríquez Menoyo, Enrique (2004). The Effect of economic restrictions on transport practices in Cuba. Transport Policy, 11(1) pp. 67–76.

Enoch, Marcus P. and Warren, James (2014). Discussion: Potential for carfree development in the UK - categorising carfree communities. Urban Design and Planning Proceedings of the Insitution of Civil Engineers, 167(1) pp. 42–43.

Eraslan, Ahmet N. and Kartal, Mehmet E. (2005). Stress distributions in cooling fins of variable thickness with and without rotation. Journal of Thermal Stresses, 28(8) pp. 861–883.

Esinesco, D.; Psoma, S.D.; Kusco, M.; Schneider, A. and Muller, R (2005). SU-8 micro-biosensor based on Mach-Zehnder interferometer. Reviews on Advanced Materials Science, 10(4) pp. 295–299.

Essa, Mohammed Hussein; Al-Zahrani, Muhammad A. and Nesaratnam, Suresh (2013). Optimisation of activated carbon production from date pits. International Journal of Environmental Engineering, 5(3) pp. 325–328.

Ewart, Ian and Luck, Rachael (2013). Living From Home. Home Cultures, 10(1) pp. 25–42.

Ewart, Ian and Luck, Rachael (2012). Portals to the World: Technological Extensions to the Boundaries of the Home. Interiors, 3(1-2) pp. 7–22.

Ewels, Chris; Meunier, Vincent; Gareth, Neighbour; Lauren, Ashby and Mauricio, Terrones (2023). The Carbon and Carbon Trends Journals in the era of Artificial Intelligence (AI) and assisted technologies. Carbon, 208 pp. 452–453.

Faeirs, Adam; Cook, Matt and Neame, Charles (2007). Towards a contemporary approach for understanding consumer behaviour in the context of domestic energy use. Energy Policy, 35(8) pp. 4381–4390.

Faeirs, Adam; Neame, Charles and Cook, Matt (2007). The adoption of domestic solar power systems: do consumers assess product attributes in a stepwise process? Energy Policy, 35(6) pp. 3418–3423.

Fan, Mei-Fang; Chiu, Chih-Ming and Mabon, Leslie (2021). Environmental justice and the politics of pollution: The case of the Formosa Ha Tinh Steel pollution incident in Vietnam. Environment and Planning E: Nature and Space, 5(1) pp. 189–206.

Farrelly, Michael and Sullivan, Helen (2010). Discourses of democracy in neighborhood governance. Critical Policy Studies, 4(3) pp. 234–249.

Farsi, A.; Pullen, A. D.; Latham, J. P.; Bowen, J.; Carlsson, M.; Stitt, E. H. and Marigo, M. (2017). Full deflection profile calculation and Young’s modulus optimisation for engineered high performance materials. Scientific reports, 7, article no. 46190.

Fedrigo, Anna; James, Jon; Zhang, Shu Yan; Salvemini, Filomena and Grazzi, Francesco (2021). On the protective effect of the stress distribution on a lamellar Edo period Samurai helmet: a neutron diffraction study. Archaeological and Anthropological Sciences, 13(6)

Fischer, Thomas B.; Potter, Karen; Donaldson, Stuart and Scott, Tony (2011). Municipal waste management strategies: strategic environmental assessment and the consideration of climate change in England. Journal of Environmental Assessment Policy and Management, 13(4) pp. 541–565.

Fitzgerald, E.J.; Caffrey, J.M.; Nesaratnam, S.T. and McLoughlin, P. (2003). Copper and lead concentrations in salt marsh plants on the Suir Estuary, Ireland. Environmental Pollution, 123(1) pp. 67–74.

Fitzpatrick, M. E.; Bhattacharjee, D.; Cree, A. M. and Daykin, C. R. S. (1996). Is fatigue surface roughness a sufficient condition for the generation of crack closure? Scripta Materialia, 35(11) pp. 1335–1340.

Fitzpatrick, M. E.; Dutta, M. and Edwards, L. (1998). Determination by neutron diffraction of effect of plasticity on crack tip strains in a metal matrix composite. Materials Science and Technology, 14(9-10) pp. 980–986.

Fitzpatrick, M. E. and Edwards, L. (1998). Fatigue Crack/Residual Stress Field Interactions and Their Implications for Damage-Tolerant Design. Journal of Materials Engineering and Performance, 7(2) pp. 190–198.

Fitzpatrick, M. E.; Hutchings, Michael; King, J. E.; Knowles, D. M. and Withers, P. J. (1995). Effect of thermal residual stresses on fatigue crack opening and propagation behavior in an Al/SiC p metal matrix composite. Metallurgical and Materials Transactions A, 26(12) pp. 3191–3198.

Fitzpatrick, M. E.; Hutchings, Michael and Withers, P. J. (1999). Separation of measured fatigue crack stress fields in a metal matrix composite material. Acta Materialia, 47(2) pp. 585–593.

Fitzpatrick, M. E.; Hutchings, Michael and Withers, P. J. (1997). Separation of macroscopic, elastic mismatch and thermal expansion misfit stresses in metal matrix composite quenched plates from neutron diffraction measurements. Acta Materialia, 45(12) pp. 4867–4876.

Fitzpatrick, M. E.; Moffatt, J. E.; Dubois, A.; Gregoire, F. and Tarrant, A. D (2002). Influence of heat treatment processes on fatigue performance of particle reinforced aluminium alloys. Materials Science and Technology, 18(12) pp. 1453–1457.

Fitzpatrick, M. E.; Withers, P. J.; Baczmanski, A.; Hutchings, Michael; Levy, R.; Ceretti, M. and Lodini, A. (2002). Changes in the misfit stresses in an Al/SiCp metal matrix composite under plastic strain. Acta Materialia, 50(5) pp. 1031–1040.

Fitzpatrick, M.E. (2006). Internal stress development during fatigue cycling of high-strength Al/SiC metal matrix composites. Materials Science Forum, 524-525 pp. 769–774.

Flanagan, Tomas; Eckert, Claudia and Clarkson, P. John (2007). Externalising tacit overview knowledge: A model-based approach to supporting design teams. Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 21(3) pp. 227–242.

Fletcher, Kate and Dewberry, Emma (2002). Demi: A case study in design for sustainability. International Journal of Sustainability in Higher Education, 3(1) pp. 38–47.

Floyd, Joshua; Iaquinto, Benjamin L.; Ison, Ray and Collins, Kevin (2014). Managing complexity in Australian urban water governance: transitioning Sydney to a water sensitive city. Futures, 61 pp. 1–12.

Fokaides, Paris A.; Polycarpou, Kyriacos and Kalogirou, Soteris (2017). The impact of the implementation of the European Energy Performance of Buildings Directive on the European building stock: The case of the Cyprus Land Development Corporation. Energy Policy, 111 pp. 1–8.

Forbes, Barbara J.; Pike, E. Roy and Sharp, David B. (2003). The Acoustical Klein-Gordon equation: the wave-mechanical step and barrier potential functions. Journal of the Acoustical Society of America, 114(3) pp. 1291–1302.

Forbes, Barbara J.; Pike, E. Roy; Sharp, David B. and Aktosun, Tuncay (2006). Inverse potential scattering in duct acoustics. Journal of the Acoustical Society of America, 119(1) pp. 65–73.

Forbes, Barbara J.; Sharp, David B.; Kemp, Jonathan A. and Li, Aijun (2003). Singular system methods in acoustic pulse reflectometry. Acta Acustica united with Acustica, 89(5) pp. 743–753.

Forsey, A. and Gungor, S. (2016). Demosaicing images from colour cameras for digital image correlation. Optics and lasers in engineering, 86 pp. 20–28.

Forsey, Alex; Das, Yadunandan; Simm, Thomas H.; Clark, Dan; Boswell, John; Gungor, Salih and Moat, Richard (2018). Mechanical Property Heterogeneity in Additively Manufactured Nickel Superalloy. Materials Science and Engineering A, 712 pp. 681–684.

Fortune, Joyce and Peters, Geoff (2001). Turning hindsight into foresight - our search for the 'philosopher's stone' of failure. Systemic Practice and Action Research, 14(6) pp. 791–803.

Fortune, Joyce; Peters, Geoffrey and Short, Lawson (2015). Shared understanding during design and delivery: the case of a large-scale information systems program. International Journal of Project Organisation and Management, 7(4) pp. 327–338.

Fortune, Joyce and White, Diana (2006). Framing of project critical success factors by a systems model. International Journal of Project Management, 24(1) pp. 53–65.

Fortune, Joyce; White, Diana; Jugdev, Kam and Walker, Derek (2011). Looking again at current practice in project management. International Journal of Managing Projects in Business, 4(4) pp. 553–572.

Foster, Natalie (2021). Water Co-Governance for Sustainable Ecosystems: Reflections and Recommendations from Pilot Processes in the UK. Water, 13(13), article no. e1737.

Foster, Natalie; Collins, Kevin; Ison, Ray and Blackmore, Chris (2016). Water Governance in England: Improving Understandings and Practices through Systemic Co-Inquiry. Water, 5, article no. 540.

Foster, Natalie; Hudson, Malcolm D.; Bray, Simon and Nicholls, Robert J. (2013). Intertidal mudflat and saltmarsh conservation and sustainable use in the UK: A review. Journal of Environmental Management, 126 pp. 96–104.

Foster, Natalie; Hudson, Malcolm D.; Bray, Simon and Nicholls, Robert J. (2014). Research, policy and practice for the conservation and sustainable use of intertidal mudflats and saltmarshes in the Solent from 1800 to 2016. Environmental Science & Policy, 38 pp. 59–71.

Foster, Natalie; Ison, Ray; Blackmore, Chris and Collins, Kevin (2019). Revisiting deliberative policy analysis through systemic co-inquiry: some experiences from the implementation of the Water Framework Directive in England. Policy Studies, 40 pp. 510–533.

Fournie, T.; Rashwan, T. L.; Switzer, C. and Gerhard, J. I. (2022). Phosphorus recovery and reuse potential from smouldered sewage sludge ash. Waste Management, 137 pp. 241–252.

Fournie, T.; Rashwan, T. L.; Switzer, C. and Gerhard, J. I. (2023). Smouldering to treat PFAS in sewage sludge. Waste Management, 164 pp. 219–227.

Fournie, T.; Rashwan, T. L.; Switzer, C.; Grant, G. P. and Gerhard, J. I. (2022). Exploring PCDD/Fs and potentially toxic elements in sewage sludge during smouldering treatment. Journal of Environmental Management, 317, article no. 115384.

Francart, Nicolas; Polycarpou, Kyriacos; Malmqvist, Tove and Moncaster, Alice (2022). Demands, default options and definitions: How artefacts mediate sustainability in public housing projects in Sweden and Cyprus. Energy Research & Social Science, 92, article no. 102765.

Franzke, Christian L. E.; Osprey, Scott M.; Davini, Paolo and Watkins, Nicholas W. (2015). A Dynamical Systems Explanation of the Hurst Effect and Atmospheric Low-Frequency Variability. Scientific Reports, 5, article no. 9068.

Franzke, Christian L.E.; Barbosa, Susana; Blender, Richard; Fredriksen, Hege‐Beate; Laepple, Thomas; Lambert, Fabrice; Nilsen, Tine; Rypdal, Kristoffer; Rypdal, Martin; Scotto, Manuel G.; Vannitsem, Stéphane; Watkins, Nicholas W.; Yang, Lichao and Yuan, Naiming (2020). The Structure of Climate Variability Across Scales. Reviews of Geophysics, 58(2), article no. e2019RG000657.

Fraser-McDonald, A.; Boardman, C.; Gladding, T.; Burnley, S. and Gauci, V. (2022). Methane emissions from forested closed landfill sites: Variations between tree species and landfill management practices. The Science of The Total Environment, 838(Part 2), article no. 156019.

Fraser-McDonald, Alice; Boardman, Carl; Gladding, Toni; Burnley, Stephen and Gauci, Vincent (2022). Methane emissions from trees planted on a closed landfill site. Waste Management & Research, 40(11) pp. 1618–1628.

Fraser-McDonald, Alice; Boardman, Carl; Gladding, Toni; Burnley, Stephen and Gauci, Vincent (2023). Nitrous oxide emissions from trees planted on a closed landfill site. AIMS Environmental Science, 10(2) pp. 313–324.

Frederickson, James and Howell, Graham (2003). Large-scale vermicomposting: emission of nitrous oxide and effects of temperature on earthworm populations (The 7th international symposium on earthworm ecology, Cardiff, Wales 2002). Pedobiologia, 47(5-6) pp. 724–730.

Frederickson, James; Howell, Graham and Hobson, Andrew (2007). Effect of pre-composting and vermicompositing on compost characteristics. European Journal of Soil Biology, 43(1) S320-S326.

Frohlich, D.; Corrigan-Kavanagh, E.; Bober, M.; Yuan, H.; Sporea, R.; Le Borgne, B.; Scarles, C.; Revill, G.; van Duppen, J.; Brown, A. W. and Beynon, M. (2019). The Cornwall a-book: An Augmented Travel Guide Using Next Generation Paper. The Journal of Electronic Publishing, 22(1)

Gabay, Clive (2008). Anarcho-cosmopolitanism: The Universalisation of the Equal Exchange. Global Society, 22(2) pp. 197–216.

Gagg, C. R. and Lewis, P. R. (2007). Counterfeit coin of the realm – Review and case study analysis. Engineering Failure Analysis, 14(6) pp. 1144–1152.

Gagg, C. R. and Lewis, P. R. (2009). In-service fatigue failure of engineered products and structures – Case study review. Engineering Failure Analysis, 16(6) pp. 1775–1793.

Gagg, C. R.; Lewis, P. R. and Tsang, C. (2008). Premature failure of a vacuum pump impeller rotor recovered from a pitch impregnation plant. Engineering Failure Analysis, 15(5) pp. 606–615.

Gagg, Colin R. and Lewis, Peter (2011). The rise and fall of cast iron in Victorian structures – a case study review. Engineering Failure Analysis, 18(8) pp. 1963–1980.

Gagg, Colin. R. and Lewis, Peter. R. (2008). Environmentally assisted product failure – Synopsis and case study compendium. Engineering Failure Analysis, 15(5) pp. 505–520.

Gagg, Colin. R. and Lewis, Peter. R. (2007). Wear as a product failure mechanism – Overview and case studies. Engineering Failure Analysis, 14(8) pp. 1618–1640.

Gajjar, Pradip K.; Khatri, Bharat C.; Das, Yadunandan and Moat, Richard (2024). Mechanical and intergranular corrosion properties of auto TIG welded TP347H-T91 dissimilar weldme. Materials Science and Technology, 40(7) pp. 503–516.

Ganguly, S.; Edwards, L. and Fitzpatrick, M. E. (2010). Problems in using a comb sample as a stress-free reference for the determination of welding residual stress by diffraction. Materials Science and Engineering A, 528(3) pp. 1226–1232.

Ganguly, S.; Fitzpatrick, M.E. and Edwards, L. (2006). Use of neutron and synchrotron X-ray diffraction for evaluation of residual stresses in a 2024-T351 Aluminum Alloy Variable-Polarity Plasma-Arc weld. Metallurgical and Materials Transactions A, 37(2) pp. 411–420.

Ganguly, S.; James, J. A.; Fitzpatrick, M. E. and Tanguy, A. (2010). Automation of a neutron diffractometer for analysis of residual stress inside complex engineering components. Applied Physics A: Materials Science & Processing, 99(3) pp. 601–606.

Ganguly, S.; Pratihar, S.; Fitzpatrick, M.E. and Edwards, L. (2008). Study of residual stress distribution in a stainless steel bead-on-plate simulation benchmark sample. Materials Science Forum, 571-572 pp. 367–373.

Ganguly, S.; Stelmukh, V.; Fitzpatrick, M. E. and Edwards, L. (2008). Analysis of residual stress in metal-inert-gas-welded Al-2024 using neutron and synchrotron X-ray diffraction. Materials Science and Engineering A, 491(1-2) pp. 248–257.

Gao, Yubi; Ding, Yutian; Li, Haifeng; Dong, Hongbiao; Zhang, Ruiyao; Li, Jun and Luo, Quanshun (2021). Grain-size dependent elastic-plastic deformation behaviour of inconel 625 alloy studied by in-situ neutron diffraction. Intermetallics, 138, article no. 107340.

Gao, Yubi; Ding, Yutian; Li, Haifeng; Dong, Hongbiao; Zhang, Ruiyao; Li, Jun and Luo, Quanshun (2022). Effect of Deformation Rate on the Elastic-Plastic Deformation Behavior of GH3625 Alloy. Acta Metallurgica Sinica, 58(5) pp. 695–708.

Gao, W.; Watts, W. R.; Ren, T.; Shin, H.; Taherzadeh, S.; Attenborough, K.; Jenkins, M. and Whalley, W. R. (2013). Estimating penetrometer resistance and matric potential from the velocities of shear and compression waves. Soil Science Society of America Journal, 77(3) pp. 721–728.

Garner, Steve (2001). Comparing graphic actions between remote and proximal design teams. Design Studies, 22(4) pp. 365–376.

Garner, Steve (2005). Revealing design complexity: Lessons from the Open University. CoDesign: International Journal of CoCreation in Design and the Arts, 1(4) pp. 267–276.

Garner, Steven (2002). Briefing illustrators: Revisiting the value of sketch images. International Journal of Art and Design Education, 21(3) pp. 234–245.

Garner, Steven and Mann, Phebe (2003). Interdisciplinarity: Perceptions of the value of computer supported collaborative work in design for the built environment. Automation in Construction, 12(5) pp. 495–499.

Garnett, Emma; Balayannis, Angeliki; Hinchliffe, Steve; Davies, Thom; Gladding, Toni and Nicholson, Phillip (2022). The work of waste during COVID-19: logics of public, environmental, and occupational health. Critical Public Health, 32(5) pp. 630–640.

Gehl Sampath, Padmashree (2006). India's Product Patent Protection Regime: Less or More of 'Pills for the Poor'? Journal of World Intellectual Property, 9(6) pp. 694–726.

Gehl Sampath, Padmashree (2007). Breaking the fence: can patents deter biomedical innovation in 'Technology Followers'? Technology Analysis & Strategic Management, 19(5) pp. 677–696.

Gehl Sampath, Padmashree (2004). Intellectual property rights on traditional medicinal knowledge: A process-oriented perspective. Journal of World Intellectual Property, 7(5) pp. 711–738.

Gehl Sampath, Padmashree and Oyelaran-Oyeyinka, Banji (2007). Interfacing health care and innovation: Traditional medicinal knowledge in Nigeria. International Journal of Technology Management and Sustainable Development, 6(2) pp. 103–121.

Geng, Hua; Poologasundarampillai, Gowsihan; Todd, Naomi; Devlin-Mullin, Aine; Moore, Katie L.; Golrokhi, Zahra; Gilchrist, James B.; Jones, Eric; Potter, Richard J.; Sutcliffe, Chris; O’Brien, Marie; Hukins, David W. L.; Cartmell, Sarah; Mitchell, Christopher A. and Lee, Peter D. (2017). Biotransformation of Silver Released from Nanoparticle Coated Titanium Implants Revealed in Regenerating Bone. ACS Applied Materials & Interfaces, 9(25) pp. 21169–21180.

Gericke, Kilian; Eckert, Claudia and Stacey, Martin (2022). Elements of a design method – a basis for describing and evaluating design methods. Design Science, 8, article no. E29.

Gericke, Kilian; Eckert, Claudia; Campean, Felician; Clarkson, P. John; Flening, Elias; Isaksson, Ola; Kokkolaras, Michael; Köhler, Christian; Panarotto, Massimo and Wilmsen, Miriam (2020). Supporting designers: Moving from method menagerie to method ecosystem. Design Science, 6, article no. e21.

Ghanem, F.; Sidhom, H.; Braham, C. and Fitzpatrick, M. E. (2002). Effect of near-surface residual stress and microstructure modification from machining on the fatigue endurance of a tool steel. Journal of Materials Engineering and Performance, 11(6) pp. 631–639.

Ghosh, Abhijit; Talapatra, Abhishek; Goolaup, Sarjoosing and Ter Lim, Sze (2023). Confined spin-wave characteristics in magnetic nanowire ensembles approaching the ultrathin regime. Physical Review Applied, 20(4), article no. 044034.

Ghosh, Paheli; Ivaturi, Aruna; Bhattacharya, Debabrata; Bowen, James; Nixon, Tony; Kowal, Jan; Braithwaite, Nicholas St John and Krishnamurthy, Satheesh (2020). Efficient hole transport material formed by atmospheric pressure plasma functionalization of Spiro-OMeTAD. Materials Today Chemistry, 17, article no. 100321.

Ghosh, Siddharth; Bowen, James; Jiang, Kyle; Espino, Daniel M. and Shepherd, Duncan E. T. (2013). Investigation of techniques for the measurement of articular cartilage surface roughness. Micron, 44 pp. 179–184.

Gibson, Virginia and Luck, Rachael (2006). Longitudinal analysis of corporate real estate practice: Changes in CRE strategy policies, functions and activities. Facilities, 24(3/4) pp. 74–89.

Gilbert, S.; Zamenopoulos, T.; Alexiou, K. and Johnson, J. (2010). Involvement of right dorsolateral prefrontal cortex in ill-structured design cognition: An fMRI study. Brain Research, 1312(C) pp. 79–88.

Githinji, David N.; Northover, Shirley; Bouchard, P. John and Rist, Martin A. (2013). An EBSD study of the deformation of service-aged 316 austenitic steel. Metallurgical and Materials Transactions A, 44(9) pp. 4150–4167.

Giusti, G.; Bowen, J.; Ramasse, Q.; Rey, G.; Blackburn, E.; Tian, L.; Jones, I. P. and Abell, J. S. (2012). Dielectric properties of pulsed-laser deposited indium tin oxide thin films. Thin Solid Films, 524 pp. 249–256.

Giusti, G.; Tian, L.; Jones, I. P..; Abell, J. S. and Bowen, J. (2009). Microstructure–property relationships in thin film ITO. Thin Solid Films, 518(4) pp. 1140–1144.

Gladding, T.L.; Rolph, C.A.; Gwyther, C.L.; Kinnersley, R.; Walsh, K. and Tyrrel, S. (2020). Concentration and composition of bioaerosol emissions from intensive farms: Pig and poultry livestock. Journal of Environmental Management, 272, article no. 111052.

Gladding, Toni (2008). Waste electrical and electronics equipment: do new regulations promote sustainability? International Journal of Performability Engineering, 4(4) pp. 319–332.

Gladding, Toni; Thorn, Jorgen and Stott, David (2003). Organic dust exposure and work-related effects among recycling workers. American Journal of Industrial Medicine, 43(6) pp. 584–591.

Gladding, Toni L. and Gwyther, Ceri L. (2017). A study of the potential release of bioaerosols from containers as a result of reduced frequency residual waste collections. Science of the Total Environment, 576 pp. 481–489.

Glover, A.; Jones, M.; Thomas, A. and Worrall, L. (2024). Finding the joy: effective mentoring in Teacher Education. Mentoring & Tutoring: Partnership in Learning (Early access).

Glowacki, B. A.; Nuttall, W. J. and Clarke, R. H. (2013). Beyond the Helium conundrum. IEEE Transactions on Applied Superconductivity, 23(3), article no. 0500113.

Glowacki, B. A.; Nuttall, W. J.; Hanley, E.; Kennedy, L. and O’Flynn, D. (2015). Hydrogen cryomagnetics for decentralised energy management and superconductivity. Journal of Superconductivity and Novel Magnetism, 28(2) pp. 561–571.

Göbel, Claudia; Nold, Christian; Berditchevskaia, Aleksandra and Haklay, Mordechai (2019). How Does Citizen Science "Do" Governance? Reflections from the DITOs Project. Citizen Science: Theory and Practice, 4(1), article no. 31.

Golrokhi, Zahra; Chalker, Sophia; Sutcliffe, Christopher J. and Potter, Richard J. (2015). Self-limiting atomic layer deposition of conformal nano-structured silver films. Applied Surface Science, 364 pp. 789–797.

Golrokhi, Zahra; Marshall, Paul A.; Romani, Simon; Rushworth, Simon; Chalker, Paul R. and Potter, Richard J. (2017). The influence of tertiary butyl hydrazine as a co-reactant on the atomic layer deposition of silver. Applied Surface Science, 399 pp. 123–131.

Goncalves, F. J. T.; Paterson, G. W.; McGrouther, D.; Drysdale, T.; Togawa, Y.; Schmool, D. S. and Stamps, R. L. (2017). Probing microwave fields and enabling in-situ experiments in a transmission electron microscope. Scientific reports, 7(1) p. 11064.

Gonzalez, Adrian; Mabon, Leslie and Agarwal, Abhishek (2021). Who wants North Sea CCS, and why? Assessing differences in opinion between oil and gas industry respondents and wider energy and environmental stakeholders. International Journal of Greenhouse Gas Control, 106, article no. 103288.

Goode, K. R.; Bowen, J.; Akhtar, N.; Robbins, P. T. and Fryer, P. J. (2013). The effect of temperature on adhesion forces between surfaces and model foods containing whey protein and sugar. Journal of Food Engineering, 118(4) pp. 371–379.

Goolaup, S.; Ramu, M.; Murapaka, C. and Lew, W. S. (2015). Transverse Domain Wall Profile for Spin Logic Applications. Scientific reports, 5, article no. 9603.

Gottberg, Annika; Longhurst, Phillip J. and Cook, Matthew B. (2010). Exploring the potential of product service systems to achieve household waste prevention on new housing developments in the UK. Waste Management and Research, 28(3) pp. 228–235.

Gottberg, Annika; Morris, Joe; Pollard, Simon; Mark-Herbert, Cecilia and Cook, Matthew (2006). Producer responsibility, waste minimisation and the WEEE Directive: case studies in eco-design from the European lighting sector. Science of the Total Environment, 359 pp. 38–56.

Graham, Janice E.; Borda-Rodriguez, Alexander; Huzair, Farah and Zinck, Emily (2012). Capacity for a global vaccine safety system: the perspective of national regulatory authorities. Vaccine, 30 pp. 4953–4959.

Graves, T.; Gramacy, R. B.; Franzke, C. L. E. and Watkins, N. W. (2015). Efficient Bayesian inference for natural time series using ARFIMA processes. Nonlinear Processes in Geophysics, 22(6) pp. 679–700.

Graves, Timothy; Franzke, Christian L.E.; Watkins, Nicholas W.; Gramacy, Robert B. and Tindale, Elizabeth (2017). Systematic inference of the long-range dependence and heavy-tail distribution parameters of ARFIMA models. Physica A: Statistical Mechanics and its Applications, 473 pp. 60–71.

Green, Naomi C.; Bowen, James; Hukins, David W. L. and Shepherd, Duncan E. T. (2015). Assessment of non-contacting optical methods to measure wear and surface roughness in ceramic total disc replacements. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 229(3) pp. 245–254.

Green, Sophie; Baird, Andy J.; Boardman, Carl P. and Gauci, Vincent (2014). A mesocosm study of the effect of restoration on methane (CH4) emissions from blanket peat. Wetlands Ecology and Management, 22(5) pp. 523–537.

Griffin, Monica; de Weck, Olivier; Bounova, Gerganga; Keller, Rene; Eckert, Claudia and Clarkson, P. John (2009). Change propagation analysis in complex technical systems. Journal of Mechanical Design, 131(8) 081001.

Grimes, Robin W. and Nuttall, William (2010). Generating the option of a two-stage nuclear renaissance. Science, 329(5993) pp. 799–803.

Grimston, Malcolm; Nuttall, William J. and Vaughan, Geoff (2014). The siting of UK nuclear reactors. Journal of Radiological Protection, 34(2) R1-R24.

Gromov, V. E.; Ivanov, Yu. F.; Qin, R. S.; Peregudov, O. A.; Aksenova, K. V. and Semina, O. A. (2017). Degradation of structure and properties of rail surface layer at long-term operation. Materials Science and Technology, 33(12) pp. 1473–1478.

Gungor, Salih (2002). Residual stress measurements in fibre reinforced titanium alloy composites. Acta Materialia, 50(8) pp. 2053–2073.

Gunn, Fraser Andrew Stewart; Ghosh, Paheli; Maciejczyk, Michal; Cameron, Joseph; Nordlund, Dennis; Krishnamurthy, Satheesh; Tuttle, Tell; Skabara, Peter; Robertson, Neil and Ivaturi, Aruna (2021). Understanding the dopant induced effects on SFX-MeOTAD for perovskite solar cells: a spectroscopic and computational investigation. Journal of Materials Chemistry C, 9(45) pp. 16226–16239.

Haarstad, Håvard; Sareen, Siddarth; Kandt, Jens; Coenen, Lars and Cook, Matthew (2022). Beyond automobility? Lock-in of past failures in low-carbon urban mobility innovations. Energy Policy, 166, article no. 113002.

Haigh, R. D. and Whatmore, R. W. (2009). On the processing conditions and interfacial chemistry of composite PZT thick films on platinised silicon substrates. Sensors and Actuators A: Physical, 151(2) pp. 203–212.

Haigh, R.D.; Hutchings, Michael; Fitzpatrick, M.E..; James, J.A.; Okido, S.; Mizuno, R.; Ogawa, K. and Hughes, D.J. (2016). Residual stress characterization of single and triple-pass autogenously welded stainless steel pipes. International Journal of Pressure Vessels and Piping, 144 pp. 1–10.

Haigh, R.D.; Hutchings, Michael; James, J. A.; Ganguly, S.; Mizuno, R.; Ogawa, K.; Okido, S.; Paradowska, A.M. and Fitzpatrick, M. E. (2013). Neutron diffraction residual stress measurements on girth-welded 304 stainless steel pipes with weld metal deposited up to half and full pipe wall thickness. International Journal of Pressure Vessels and Piping, 101 pp. 1–11.

Hainsworth, S. V. and Fitzpatrick, M. E. (2007). Forensic engineering: applying materials and mechanics principles to the investigation of product failures. Forensic Science, Medicine and Pathology, 3(2) pp. 81–92.

Haklay, Muki; Fraisl, Dilek; Greshake Tzovaras, Bastian; Hecker, Susanne; Gold, Margaret; Hager, Gerid; Ceccaroni, Luigi; Kieslinger, Barbara; Wehn, Uta; Woods, Sasha; Nold, Christian; Balázs, Bálint; Mazzonetto, Marzia; Ruefenacht, Simone; Shanley, Lea A.; Wagenknecht, Katherin; Motion, Alice; Sforzi, Andrea; Riemenschneider, Dorte; Dorler, Daniel; Heigl, Florian; Schaefer, Teresa; Lindner, Ariel; Weißpflug, Maike; Mačiulienė, Monika and Vohland, Katrin (2021). Contours of citizen science: a vignette study. Royal Society Open Science, 8(8)

Hales, David and Arteconi, Stefano (2008). Motifs in evolving cooperative networks look like protein structure networks. Networks and Heterogeneous Media, 3(2) pp. 239–249.

  • Proof (PDF) This file is not available for public download

Hall, D.J.; Wood, D.; Murray, N.J.; Gow, J.P.D.; Chroneos, A. and Holland, A. (2017). In situ trap properties in CCDs: the donor level of the silicon divacancy. Journal of Instrumentation, 12, article no. P01025.

Hallett, Stephen H. and Caird, Sally P. (2017). Soil-Net - Development and impact of an innovative, open, online soil science educational resource. Soil Science, 182(5) pp. 188–201.

Hamilton, Joshua K.; Berry, Simon J.; Spencer, Joseph H.; Lawrence, Christopher R.; Smith, Francis C. and Drysdale, Timothy D. (2020). Three‐dimensional profiling of collimated radio‐frequency orbital angular momentum beams. IET Microwaves, Antennas & Propagation, 14(6) pp. 547–550.

Hanan, Deirdre; Burnley, Stephen and Cooke, David (2013). A multi-criteria decision analysis assessment of waste paper management options. Waste Management, 33(3) pp. 566–573.

Hanlin, Rebecca and Muraguri, Lois (2009). Improving access to health technologies by the poor: the social context in Tanzanian bed net production and delivery. International Journal of Technology Management and Sustainable Development, 8(3) pp. 237–248.

Hannaford, Jamie; Collins, Kevin; Haines, Sophie and Barker, Lucy (2019). Enhancing drought monitoring and early warning for the UK through stakeholder co-enquiries. Weather, Climate, and Society, 11(1) pp. 49–63.

Harris, Fiona; Roby, Helen and Dibb, Sally (2016). Sustainable clothing: challenges, barriers and interventions for encouraging more sustainable consumer behaviour. International Journal of Consumer Studies, 40(3) pp. 309–318.

Harrison, C. M.; Munton, R. J. C and Collins, K. (2004). Experimental discursive spaces: policy processes, public participation and the greater London authority. Urban Studies, 41(4) pp. 903–917.

Harrison, Jesse P.; Boardman, Carl; O'Callaghan, Kenneth; Delort, Anne-Marie and Song, Jim (2018). Biodegradability standards for carrier bags and plastic films in aquatic environments: a critical review. Royal Society Open Science, 5, article no. 171792.

Harrison, Laura; Earl, Christopher and Eckert, Claudia (2015). Exploratory making: Shape, structure and motion. Design Studies, 41(A) pp. 51–78.

Hatem, Faten (2023). Smart in city performance: More to practical life than hardware and software. IET Smart Cities, 5(1) pp. 49–63.

He, Yanping; Bowen, James; Andrews, James W.; Liu, Min; Smets, Johan and Zhang, Zhibing (2014). Adhesion of perfume-filled microcapsules to model fabric surfaces. Journal of Microencapsulation, 31(5) pp. 430–439.

Heath, Robert M.; Tanner, Michael G.; Drysdale, Timothy D.; Miki, Shigehito; Giannini, Vincenzo; Maier, Stefan A. and Hadfield, Robert H. (2015). Nanoantenna enhancement for telecom-wavelength superconducting single photon detectors. Nano Letters, 15(2) pp. 819–822.

Heeley, Ellen L.; Hughes, Darren J.; Crabb, Eleanor M.; Bowen, James; Bikondoa, Oier; Mayoral, Beatriz; Leung, Sandy and McNally, Tony (2017). The formation of a nanohybrid shish-kebab (NHSK) structure in melt-processed composites of poly (ethylene terephthalate) (PET) and multi-walled carbon nanotubes (MWCNTs). Polymer, 117 pp. 208–219.

Heeley, Ellen L.; Hughes, Darren J.; Crabb, Eleanor M.; Bowen, James; Bikondoa, Oier; Mayoral, Beatriz and McNally, Tony (2017). Confirmation of a Nanohybrid Shish-Kebab (NHSK) Structure in Composites of PET and MWCNTs. Journal of Polymer Science. Part B: Polymer Physics, 55(2) pp. 132–137.

Heffron, Raphael J.; Ashley, Stephen F. and Nuttall, William J. (2016). The global nuclear liability regime post Fukushima Daiichi. Progress in Nuclear Energy, 90 pp. 1–10.

Herman, Clem; Gracia, Rosaria; MacNiven, Lesley; Clark, Bernie and Doyle, Geraldine (2019). Using a Blended Learning Approach to support Women returning to STEM. Open Learning: The Journal of Open, Distance and e-Learning, 34(1) pp. 40–60.

Hermann, R.; Moffatt, J. and Plumbridge, W. J. (1995). A comparison of crack initiation techniques for ceramics. Journal of Materials Science Letters, 14(4) pp. 282–284.

Herring, Horace (2009). National building stocks: addressing energy consumption or decarbonization? Building Research & Information, 37(2) pp. 192–195.

Herring, Horace and Roy, Robin (2007). Technological innovation, energy efficient design and the rebound effect. Technovation, 27(4) pp. 194–203.

Herring, Horace and Roy, Robin (2002). Sustainable services, electronic education and the rebound effect. Environmental Impact Assessment Review, 22(5) pp. 525–542.

Hettiarachchi, Sunil Jayantha; Bowen, James; Kershaw, Matthew; Baragau, Ioan-Alexandru; Nicolaev, Adela and Kellici, Suela (2023). Nanostructured Al2O3/Graphene Additive in Bio-Based Lubricant: A Novel Approach to Improve Engine Performance. Tribology International, 186, article no. 108619.

Hettiarachchi, Sunil Jayantha; Kellici, Suela; Kershaw, Matthew and Bowen, James (2023). Enhancing physicochemical properties of coconut oil for the application of engine lubrication. Tribology International, 190, article no. 109060.

Hibbert, William A.; Sharp, David B.; Taherzadeh, Shahram and Perrin, Robert (2014). Partial frequencies and Chladni’s law in church bells. Open Journal of Acoustics, 4(2) pp. 70–77.

Hibbert, William A.; Taherzadeh, Shahram and Sharp, David B. (2017). Virtual Pitch and Pitch Shifts in Church Bells. Open Journal of Acoustics, 7(3) pp. 52–68.

Hicks, C.; Song, D. P. and Earl, C. F. (2007). Dynamic scheduling for complex engineer-to-order products. International Journal of Production Research, 45(15) pp. 3477–3503.

Hicks, Chris; McGovern, Tom and Earl, Chris F. (2001). A Typology of UK Engineer-to-Order Companies. International Journal of Logistics: research and applications, 4(1) pp. 43–56.

Hicks, Christian; Song, Dong-Ping and Earl, Christopher F. (2006). An ordinal optimization based evolution strategy to schedule complex make-to-order products. International Journal of Production Research, 44(22) pp. 4877–4895.

High, Chris and Nemes, Gusztáv (2007). Social learning in LEADER: Exogenous, endogenous and hybrid evaluation in rural development. Sociologia Ruralis, 47(2) pp. 103–119.

Hilton, Clive (2016). How language limitations affect conceptual thresholds among Chinese design students in the United Kingdom. Art, Design & Communication in Higher Education, 15(2) pp. 135–143.

Hincliffe, Steve; Levidow, Les and Oreszczyn, Sue (2014). Engaging cooperative research. Environment and Planning A, 46(9) pp. 2080–2094.

Hnat, B.; Chapman, S. C. and Watkins, N. W. (2021). Magnetic Topology of Actively Evolving and Passively Convecting Structures in the Turbulent Solar Wind. Physical Review Letters, 126(12), article no. 125101.

Hnat, Bogdan; Chapman, Sandra and Watkins, Nicholas (2023). Topology of turbulence within collisionless plasma reconnection. Scientific Reports, 13, article no. 18665.

Ho, Pin; Tan, Anthony K.C.; Goolaup, S.; Gonzalez Oyarce, A.L.; Raju, M.; Huang, L.S.; Soumyanarayanan, Anjan and Panagopoulos, C. (2019). Geometrically Tailored Skyrmions at Zero Magnetic Field in Multilayered Nanostructures. Physical Review Applied, 11(2), article no. 024064.

Hobson, A. M.; Frederickson, J. and Dise, N. B. (2005). CH4 and N2O from mechanically turned windrow and vermicomposting systems following in-vessel pre-treatment. Waste Management, 25(4) pp. 345–352.

Hodgson, Paul and Potter, Stephen (2010). Refining light rapid transit typology: a UK perspective. Transportation Planning and Technology, 33(4) pp. 367–384.

Hodgson, Paul; Potter, Stephen; Warren, James and Gillingwater, David (2013). Can bus really be the new tram? Research in Transportation Economics, 39(1) pp. 158–166.

Holden, Tom M.; Traore, Yeli; James, Jon; Kelleher, Joe and Bouchard, P. John (2015). Determination and mitigation of the uncertainty of neutron diffraction measurements of residual strain in large-grained polycrystalline material. Journal of Applied Crystallography, 48(2) pp. 582–584.

Holliman, Richard; Marino, Alessandra; Grand, Ann; Berardi, Andrea; Mistry, Jay; Jafferally, Deirdre; Thomas, Raquel; Roberts, Grace; Marcus, Carol-Ann; Roopsind, Indranee and Roberts, Anthony (2022). A case study from Guyana of adapting engaged research design to promote ‘fairness in knowing’. Research for All, 6(1) pp. 1–17.

Hölttä-Otto, Katja; Björklund, Tua; Klippert, Monika; Otto, Kevin; Krause, Dieter; Eckert, Claudia; Nespoli, Oscar and Albers, Albert (2023). Facing extreme uncertainty – how the onset of the COVID-19 pandemic influenced product development. International Journal of Design Creativity and Innovation, 11(2) pp. 117–137.

Hope, Chris; Parker, Jonathan and Peake, Stephen (1992). A pilot environmental index for the UK in the 1980s. Energy Policy, 20(4) pp. 335–343.

Hope, Chris; Parker, Jonathan and Peake, Stephen (1991). A pilot Environmental Index for the United Kingdom: Results for the last decade. Statistical Journal of the United Nations Economic Commission for Europe, 8(1) pp. 85–107.

Horrocks, Ivan (2009). Experts and e-government: Power, influence and the capture of a policy domain in the UK. Information, Communication and Society, 12(1) pp. 110–127.

Horrocks, Ivan (2009). Applying the morphogenetic approach: outcomes and issues from a case study of information systems development and organisational change in British local government. Journal of Critical Realism, 8(1) pp. 35–62.

Horrocks, Ivan (2001). Security training: education for an emerging profession? Computers & Security, 20(3) pp. 219–226.

Horrocks, Ivan and Bellamy, Christine (1997). Telematics and community governance: Issues for policy and practice. International Journal of Public Sector Management, 10(5) pp. 377–387.

Horrocks, Ivan and Budd, Leslie (2015). Into the void: a realist evaluation of the eGovernment for You (EGOV4U) project. Evaluation, 21(1) pp. 47–64.

Horrocks, Ivan and Hambley, Neil (1998). The 'Webbing' of British Local Government. Public Money and Management, 18(2) pp. 39–44.

Horrocks, Ivan and Webb, Jeff (1994). Electronic democracy: A policy issue for UK local government? Local Government Policy Making, 21(3) pp. 22–30.

Hossain, S.; Truman, C. E.; Smith, D. J. and Bouchard, P. J. (2006). Measurement of residual stresses in a type 316H stainless steel offset repair in a pipe girth weld. Journal of Pressure Vessel Technology, 128(3) pp. 420–426.

Hosseinzadeh, Foroogh; Tafazzoli-Moghaddam, Behrooz; Kim, Ho Kyeom; Bouchard, Peter John; Akrivos, Vasileios; Vasileiou, Anastasia N. and Smith, Mike (2023). Residual stresses in austenitic thin-walled pipe girth welds: Manufacture and measurements. International Journal of Pressure Vessels and Piping, 206, article no. 150016.

Hosseinzadeh, F. and Bouchard, P. J. (2013). Mapping multiple components of the residual stress tensor in a large P91 steel pipe girth weld using a single contour cut. Experimental Mechanics, 53(2) pp. 171–181.

Hosseinzadeh, F.; Traore, Y.; Bouchard, P. J. and Muransky, O. (2016). Mitigating cutting-induced plasticity in the contour method, part 1: Experimental. International Journal of Solids and Structures, 94-95 pp. 247–253.

Hosseinzadeh, Foroogh and Bouchard, Peter John (2013). Mapping multiple components of the stress tensor using the contour method. Materials Science Forum, 768-769 pp. 87–94.

Hosseinzadeh, Foroogh; Kowal, Jan and Bouchard, Peter John (2014). Towards good practice guidelines for the contour method of residual stress measurement. Journal of Engineering (Online only).

Hosseinzadh, Foroogh; Bouchard, P. John and James, Jonathan A. (2010). Measurements of Residual Stress in a Welded Compact Tension Specimen Using the Neutron Diffraction and Slitting Techniques. Materials Science Forum, 652 pp. 210–215.

Hosseinzadh, Foroogh; Toparli, Muhammed Burak and Bouchard, Peter John (2012). Slitting and Contour Method Residual Stress Measurements in an Edge Welded Beam. Journal of Pressure Vessel Technology, 134(1) 011402-1-011402-6.

Hosseinzadh Torknezhad, F.; Ledgard, P. and Bouchard, P. J. (2013). Controlling the cut in contour residual stress measurements of electron beam welded Ti-6Al-4V alloy plates. Experimental Mechanics, 53(5) pp. 829–839.

Hou, Fei; Zhong, Xiaoxing; Zanoni, Marco A.B.; Rashwan, Tarek L. and Torero, José L. (2024). Multi-step scheme and thermal effects of coal smouldering under various oxygen-limited conditions. Energy, 299, article no. 131421.

Hou, Fei; Zhong, Xiaoxing; Zanoni, Marco A.B.; Rashwan, Tarek L. and Torero, José L. (2024). Quantifying oxygen diffusion during thermal degradation of combustible porous media. Applied Thermal Engineering, 257(Part A), article no. 124219.

Howe, Katie S.; Clark, Ewan R.; Bowen, James and Kendall, Kevin (2013). A novel water-based cathode ink formulation. International Journal of Hydrogen Energy, 38(3) pp. 1731–1736.

Howell, Rhys; Shackley, Simon; Mabon, Leslie; Ashworth, Peta and Jeanneret, Talia (2014). Engaging the public with low-carbon energy technologies: Results from a Scottish large group process. Energy Policy, 66 pp. 496–506.

Hu, Feng; Wu, Kaiming; Hou, Tingping and Shirzadi, Amir Abbas (2014). Effect of Tempering Temperature on the Microstructure and Hardness of a Super-bainitic Steel Containing Co and Al. ISIJ International, 54(4) pp. 926–931.

Hu, F.; Wu, K. M. and Shirzadi, A. A. (2012). Influence of Co and Al on pearlitic transformation in superbainitic steels. Ironmaking & Steelmaking, 39(7) pp. 535–539.

Hu, F.; Wu, K. M.; Wan, X. L.; Rodionova, I.; Shirzadi, A. A. and Zhang, F. C. (2017). Novel method for refinement of retained austenite in micro/nano-structured bainitic steels. Materials Science and Technology, 33(11) pp. 1360–1365.

Hu, Feng; Wu, Kaiming; Hodgson, Peter Damian and Shirzadi, Amir Abbas (2014). Refinement of retained austenite in super-bainitic steel by a deep cryogenic treatment. ISIJ International, 54(1) pp. 222–226.

Hu, Feng; Wu, Kaiming; Hou, Tingping and Shirzadi, Amir A. (2013). Tempering stability of retained austenite in nanostructured dual-phase steels. Materials Science and Technology, 29(8) pp. 947–953.

Huang, Yi-Chen and Mabon, Leslie (2021). Coastal landscapes, sustainable consumption and peripheral communities: Evaluating the Miramar Resort controversy in Shanyuan Bay, Taiwan. Marine Policy, 123, article no. 104283.

Huang, Yi-Chen and Mabon, Leslie (2022). Making sense of how proponents conspire to thwart environmental impact assessment processes: insights from the Miramar Resort controversy in Taiwan. Journal of Environmental Planning and Management, 65(9) pp. 1685–1707.

Huang, G.; Wan, X. L.; Wu, K. M.; Isayev, O.; Hress, O.; Rodionova, I. and Shirzadi, A. A. (2016). Effect of Cu addition on microstructure and impact toughness in the simulated coarse-grained heat-affected zone of high-strength low-alloy steels. Materials Science and Technology, 33(5) pp. 602–614.

Huang, Yi-Chen; Fan, Mei-Fang; Yang, Chih-Yuan and Mabon, Leslie (2020). Social science studies of the environment in Taiwan: what can the international community learn from work published within Taiwan? Local Environment, 25(1) pp. 36–42.

Humphries, A.C.; Mikheenko, I.P. and Macaskie, L.E. (2006). Chromate reduction by immobilized palladized sulfate-reducing bacteria. Biotechnology and Bioengineering, 94(1) pp. 81–90.

Humphries, A.C.; Nott, K.P.; Hall, L.D. and Macaskie, L.E. (2005). Reduction of Cr(VI) by immobilized cells of Desulfovibrio vulgaris NCIMB 8303 and Microbacterium sp. NCIMB 13776. Biotechnology and Bioengineering, 90(5) pp. 589–596.

Humphries, A.C.; Nott, K.P.; Hall, L.D. and Macaskie, L.E. (2004). Continuous removal of Cr(VI) from aqueous solution catalysed by palladised biomass of Desulfovibrio vulgaris. Biotechnology Letters, 26(19) pp. 1529–1532.

Humphries, Andrea C and Macaskie, Lynne E (2005). Reduction of Cr(VI) by palladized biomass of Desulfovibrio vulgaris NCIMB 8303. Journal of Chemical Technology & Biotechnology, 80(12) pp. 1378–1382.

Humphries, Andrea C; Penfold, David W and Macaskie, Lynne E (2007). Cr(VI) reduction by bio and bioinorganic catalysis via use of bio-H2: a sustainable approach for remediation of wastes. Journal of Chemical Technology & Biotechnology, 82(2) pp. 182–189.

Hush, P.; Chapman, S. C.; Dunlop, M. W. and Watkins, N. W. (2015). Robust statistical properties of the size of large burst events in AE. Geophysical Research Letters, 42(21) pp. 9197–9202.

Hussain, Romana; Lockett, Helen and Annamalai Vasantha, Gokula Vijaykumar (2012). A framework to inform PSS Conceptual Design by using system-in-use data. Computers in Industry, 63(4) pp. 319–327.

Huzair, Farah (2008). Innovative Potential in Hungarian Agricultural Biotechnology and the Evolution of Networks. Studies in Ethics, Law and Technology, 2(2), article no. 3.

Huzair, Farah (2012). The influenza vaccine innovation system and lessons for PDPs. Human Vaccines & Immunotherapeutics, 8(3) pp. 407–410.

Huzair, Farah and Borda-Rodriguez, Alexander (2012). Challenges for the application and development of omics health technologies in developing countries. Drug Development Research, 73(7) pp. 447–451.

Huzair, Farah; Borda-Rodriguez, Alexander and Upton, Mary (2011). Twenty-first century vaccinomics innovation systems: capacity building in the global South and the role of Product Development Partnerships (PDPs). OMICS: A Journal of Integrative Biology, 15(9) pp. 539–543.

Huzair, Farah; Borda-Rodriguez, Alexander; Upton, Mary and Mugwagwa, Julius (2013). An interdisciplinary and development lens on knowledge translation. Science and Public Policy, 40(1) pp. 43–50.

Huzair, Farah and Kale, Dinar (2015). Biosimilars and the long game. Trends in Biotechnology, 33(5) pp. 250–252.

Huzair, Farah and Papaioannou, Theo (2012). UK Biobank: consequences for commons and innovation. Science and Public Policy, 39(4) pp. 500–512.

Huzair, Farah and Robbins, Peter (2008). Life Sciences Innovation in Central and Eastern Europe: Conceptual Frameworks and Contributions. Studies in Ethics, Law and Technology, 2(2)

Ibbotson, Paul; Jimenez-Romero, Cristian and Page, Karen M. (2022). Dying to cooperate: the role of environmental harshness in human collaboration. Behavioral Ecology, 33(1) pp. 190–201.