Currently browsing: Design and Innovation Research Group

Number of items at this level: 688.
Generated on Thu Apr 15 17:32:36 2021 BST.

BookTo Top

Cross, Nigel (2006). Designerly Ways of Knowing. London: Springer-Verlag.

Elliott, David (2019). Renewable energy in the UK: past, present and future. Energy Climate and Enviroment. Palgrave.

Ison, Stephen; Peake, Stephen and Wall, Stuart (2002). Environmental issues and policies. Harlow, UK: Pearson Education Limited.

Johnson, Jeffrey (2013). Hypernetworks in the science of complex systems. Series on complexity science, 3. London: Imperial College Press.

Michtell, John V. and Peake, Stephen (1994). An Oil Agenda for Europe. London: Brookings.

Peake, Stephen and Schipper, Lee (1997). Transport, Energy and Climate Change. Energy and environment policy analysis series. Paris: Organisation for Economic Cooperation and Development (OECD).

Peake, Stephen and Smith, Joe (2009). Climate Change: From Science to Sustainability. Oxford, UK: Oxford University Press.

Walsh, Vivien; Roy, Robin; Bruce, Margaret and Potter, Stephen (1992). Winning by Design: Technology, Product Design and International Competitiveness. Oxford, UK: Blackwell Publishers.

Zamenopoulos, Theodore and Alexiou, Katerina (2018). Co-design As Collaborative Research. Connected Communities Foundation Series. Bristol: Bristol University/AHRC Connected Communities Programme.

Edited BookTo Top

Johnson, Jeffrey; Nowak, Andrzej; Ormerod, Paul; Rosewell, Bridget and Zhang, Yi-Cheng eds. (2017). Non-Equilibrium Social Science and Policy: Introduction and Essays on New and Changing Paradigms in Socio-Economic Thinking. Understanding Complex Systems. Cham, Switzerland: Springer.

Pomponi, Francesco; De Wolf, Catherine and Moncaster, Alice eds. (2018). Embodied Carbon in Buildings: Measurement, Management, and Mitigation. Springer.

Robertson, Judy; Williams, Alison; Jones, Derek; Isbel, Lara and Loads, Daphne eds. (2017). EqualBITE: Gender equality in higher education. Rotterdam: Sense Publishers.

Warren, J. P. ed. (2007). Managing Transport Energy. Power for a Sustainable Future, 3. Oxford: Oxford University Press, in association with The Open University.

Williams, Alison; Jones, Derek and Robertson, Judy eds. (2014). BITE: Recipes for Remarkable Research. Rotterdam: Sense Publishers.

Book SectionTo Top

Alevizou, Giota; Alexiou, Katerina; Harte, Dave; Sobers, Shawn; Zamenopoulos, Theodore and Turner, Jerome (2016). Civic cultures and modalities of place-making. In: Hargreaves, Ian and Hartley, John eds. The creative citizen unbound: How social media and DIY culture contribute to democracy, communities and the creative economy. Bristol: Policy Press, pp. 205–230.

Alexiou, Katerina (2009). Complexity and coordination in collaborative design. In: Alexiou, Katerina; Johnson, Jeffrey and Zamenopoulos, Theodore eds. Embracing Complexity in Design. London, UK: Routledge, pp. 73–93.

Alexiou, Katerina; Aguista, Emma; Alevizou, Giota; Chapain, Caroline; Greene, Catherine; Harte, Dave; Ramster, Gail and Zamenopoulos, Theodore (2016). Asset mapping and civic creativity. In: Hargreaves, Ian and Hartley, John eds. The creative citizen unbound: How social media and DIY culture contribute to democracy, communities and the creative economy. Bristol: Policy Press, pp. 181–204.

Alexiou, Katerina; Alevizou, Giota and Zamenopoulos, Theodore (2014). Wards Corner Community Plan Case Study. In: Lockton, D; Greene, K.; Casey, A; Raby, L and Vickress, A eds. Variety Pack: Inspiring Digital Ideas From Community Projects. London: Helen Hamlyn Centre for Design.

Alexiou, Katerina; Zamenopoulos, Theodore and Gilbert, Sam (2011). Imaging the designing brain: a neurocognitive exploration of design thinking. In: Gero, John S. ed. Design Computing and Cognition '10. London: Springer, pp. 489–504.

Baker, Hannah and Moncaster, Alice (2018). Adaptation and Demolition in a Masterplan Context. In: Wilkinson, Sara J. and Remøy, Hilde eds. Building Urban Resilience through Change of Use. John Wiley & Sons, pp. 57–81.

Bostwick-Lorenzo Eiroa, Meredith and Jones, Derek (2014). The spatial and social constructs of creative situations. In: Williams, Alison; Jones, Derek and Robertson, Judy eds. BITE: Resipes for Remarkable Research. Rotterdam: Sense Publishers, pp. 260–266.

Boyle, Godfrey (2012). Solar Photovoltaics. In: Boyle, Godfrey ed. Renewable Energy: Power for a Sustainable Future (3rd edition). Oxford: Oxford University Press, in association with The Open University, pp. 75–115.

Boyle, Godfrey (2009). Cities and climate change: leading to a low carbon London. In: Wilson, Gordon; Furniss, Pamela and Kimbowa, Richard eds. Environment, Development, and Sustainability: Perspectives and cases from around the world. Oxford, UK: Oxford University Press, pp. 185–193.

Boyle, Godfrey; Peake, Stephen and Everett, Robert (2012). Remedies: towards a sustainable energy future. In: Everett, Robert; Boyle, Godfrey; Peake, Stephen and Ramage, Janet eds. Energy Systems and Sustainability: Power for a Sustainable Future (2nd edition). Oxford: Oxford University Press, in association with The Open University, pp. 571–621.

Caird, S. and Roy, R. (2018). Blended Learning and Sustainable Development. In: Leal Filho, W. ed. Encyclopaedia of Sustainability and Higher Education. Springer, Cham.

Caird, S. and Roy, R. (2019). Sustainable Higher Education Systems. In: Leal Filho, W. ed. Encyclopaedia of Sustainability and Higher Education. Springer, Cham.

Caird, S. P. (2019). Measurement and Evaluation of Smart City Outcomes for Smarter Governance. In: Nuttall, W.; Gibson, D.; Ibarra-Yunez, A. and Trzmielak, D. eds. Energy and Mobility in Smart Cities. Institution of Civil Engineers Publishing, UK, pp. 167–185.

Caird, Sally; Lane, Andrew and Swithenby, Ed (2013). ICTs and the design of sustainable higher education teaching models: an environmental assessment of UK courses. In: Caeiro, S.; Leal Filho, W.; Jabbour, C. J. C. and Azeiteiro, U. M. eds. Sustainability Assessment Tools in Higher Education – Mapping Trends and Good Practices at Universities round the World. Cham, Switzerland: Springer International Publishing, pp. 375–386.

Caird, Sally; Lane, Andrew and Swithenby, Edward (2014). Greening Higher Education qualification programmes with online learning. In: Leal Filho, W.; Azeiteiro, U. and Caeiro, S. eds. E-learning and sustainability. Umweltbildung, Umweltkommunikation und Nachhaltigkeit - Environmental Education, Communication and Sustainability, 35. Frankfurt am Main, Berlin, Bern, Bruxelles, New York, Oxford, Wien: Peter Lang Scientific Publishers, pp. 105–116.

Caird, Sally and Roy, Robin (2010). Yes in my back yard: UK householders pioneering technologies. In: Devine-Wright, Patrick ed. Renewable Energy and the Public. London: Earthscan, pp. 203–219.

Collins, Hilary J. (2009). Emotion and Identity in Flagship Luxury Design. In: Kent, Tony and Brown, Reva eds. Flagship Marketing: Concepts and places. Routledge Advances in Management and Business Studies. Oxon: Routledge, pp. 32–45.

Comunian, Roberta and Alexiou, Katerina (2015). Mapping the complexity of creative practice: using cognitive maps to follow creative ideas and collaborations. In: Duxbury, Nancy; Garrett-Petts, W. .F and MacLennan, David eds. Cultural Mapping as Cultural Inquiry. Routledge Advances in Research Methods. Abingdon: Routledge, pp. 276–302.

Cook, M. (2004). Understanding the potential opportunities provided by service orientated concepts to improve resource productivity. In: Bhamra, Tracy and Hon, Bernard eds. Design and Manufacture for Sustainable Development 2004. Bury St. Edmonds, UK: Professional Engineering Publishing Limited, pp. 123–134.

Cook, Matthew; Horne, Ralph; Potter, Stephen and Valdez, Alan-Miguel (2019). Exploring the epistemic politics of urban niche experiments. In: Jensen, Jens Stissing; Cashmore, Matthew and Späth, Philipp eds. The Politics of Urban Sustainability Transitions: Knowledge, Power and Governance. Abingdon, Oxon: Routledge, pp. 125–147.

Cross, Nigel (2001). Design cognition: results from protocol and other empirical studies of design activity. In: Eastman, C.; Newstatter, W. and McCracken, M. eds. Design knowing and learning: cognition in design education. Oxford, UK: Elsevier, pp. 79–103.

Cross, Nigel (2018). Expertise in Professional Design. In: Ericsson, K. Anders; Hoffman, Robert R.; Kozbelt, Aaron and Williams, A. Mark eds. Cambridge Handbook of Expertise and Expert Performance (2nd ed). Cambridge: Cambridge University Press, pp. 372–388.

Cross, Nigel (2010). Understanding design thinking. In: Guerrini, Luca ed. Notes on Doctoral Research in Design: Contributions from the Politecnico di Milano. Serie di architettura e design. Strumenti. Milan: FrancoAngeli, pp. 19–38.

Cross, Nigel (2002). Creative cognition in design: processes of exceptional designers. In: Hewett, Tom and Kavanagh, Terence eds. Creativity and cognition. New York, USA: ACM Press, pp. 14–19.

Cross, Nigel (2007). From a design science to a design discipline: understanding designerly ways of knowing and thinking. In: Michel, Ralf ed. Design Research Now: Essays and Selected Projects. Basel: Birkhauser, pp. 41–54.

Cross, Nigel (2002). The nature and nurture of design ability. In: Owen-Jackson, Gwyneth ed. Design and Technology in Secondary Schools. Routledge.

Dewberry, Emma (2004). Factor 10: the changing landscape of learning. In: Bhamra, Tracy and Hon, Bernard eds. Design and Manufacture for Sustainable Development 2004. Bury St Edmunds, UK: Professional Engineering Publishing (Wiley), pp. 145–155.

Dewberry, Emma (2012). Eco-intelligence: Designing for the Real World. In: Garner, Steve and Evans, Chris eds. Design and Designing: A Critical Introduction. London: Berg.

Dum, Ralph and Johnson, Jeffrey (2017). Global Systems Science and Policy. In: Johnson, Jeffrey; Nowak, Andrzej; Ormerod, Paul; Rosewell, Bridget and Zhang, Yi-Cheng eds. Non-Equilibrium Social Science and Policy: Introduction and Essays on New and Changing Paradigms in Socio-Economic Thinking. Understanding Complex Systems. Cham, Switzerland: Springer, pp. 209–225.

Earl, Chris; Johnson, Jeffrey and Eckert, Claudia (2005). Complexity. In: Clarkson, John and Eckert, Claudia eds. Design Process Improvement: A Review Of Current Practice. London, U.K.: Springer Science + Business Media, pp. 174–197.

Earl, Chris; Johnson, Jeffrey and Eckert, Claudia (2005). Complexity. In: Clarkson, John and Eckert, Claudia eds. Design process improvement: a review of current practice. Springer Science+Business. London, UK: Springer Verlag, pp. 174–197.

Earl, Christopher; Eckert, Claudia and Johnson, Jeffrey (2005). Complexity of planning in design. In: Tumer, Irem Y.; Hayes, Caroline and Gupta, S. K. eds. Proceedings of the 2001 ASME Design Engineering Technical Conferences and Computers and Information in Engineering Conference. New York: American Society of Mechanical Engineers.

Earl, Christopher; Song, Dong Ping and Hicks, Christian (2003). Planning complex engineer-to-order products. In: Gogu, Grigore; Coutellier, Daniel; Chedmail, Patrick and Ray, Pascal eds. Recent Advances in Integrated Design and Manufacturing in Mechanical Engineering. Dordecht, Netherlands: Kluwer, pp. 463–472.

Eckert, C. M.; Earl, C. E. and Clarkson, P. J. (2005). Predictability of change in engineering: A complexity view. In: Design Engineering Division, ASME and Computers and Information in Engineering Division, ASME eds. 17th International Conference on Design Theory and Methodology. New York: American Society of Mechanical Engineers, pp. 341–350.

Eckert, C. M. and Stacey, M. K. (2010). What is a process model? Reflections on the epistemology of design process models. In: Heisig, Peter; Clarkson, John and Vanja, Sandor eds. Modelling and Management of Engineering Processes. New York, USA: Springer, pp. 3–14.

Eckert, Claudia (2014). Design for Values in the fashion and textile industry. In: van den Hoven, Jeroen; Vermaas, Pieter E. and van de Poel, Ibo eds. Handbook of Ethics, Values and Technological Design: Sources, Theory, Values and Application Domains. Springer Netherlands.

Eckert, Claudia and Hillerbrand, Rafaela (2018). Models in Engineering Design: Generative and epistemic function of product models. In: Vermaas, Pieter and Vial, Stéphane eds. Advancements in the Philosophy of Design. Design Research Foundations. Springer, pp. 219–242.

Eckert, Claudia and Schadewitz, Nicole (2011). Disziplinen der Produktentwicklung aus der Perspektive des angelsächsischen Raums. In: Banse, Gerhard and Fleischer, Lutz-Günther eds. Wissenschaft im Kontext. Inter- und Transdisziplinarität in Theorie und Praxis. Abhandlungen der Leibniz-Sozietät der Wissenschaften, Bd. 27 (27). Berlin: trafo wissenschaft verlag.

Eckert, Claudia and Stacey, Martin (2014). Constraints and conditions: drivers for design processes. In: Chakrabarti, Amaresh and Blessing, Lucienne eds. An Anthology of Theories and Models of Design: Philosophy, Approaches and Empirical Explorations. London: Springer, pp. 395–415.

Eckert, Claudia; Stacey, Martin and Earl, Christopher (2005). References to past designs. In: Gero, J. S. and Bonnardel, N. eds. Studying Designers '05. Sydney, Australia: Key Centre of Design Computing and Cognition, pp. 3–21.

Ellis, Jane and Peake, Stephen (1996). Policy options to limit CO2 emissions from electricity supply. An OECD perspective. In: International Atomic Energy Agency, IAEA ed. Symposium on electricity, health and the environment: Comparative assessment in support of decision making. Vienna: International Atomic Energy Agency (IAEA), pp. 93–108.

Fletcher, Kate; Dewberry, Emma and Goggin, Phillip (2001). Sustainable Consumption by Design. In: Cohen, Maurie J. and Murphy, Joseph eds. Exploring Sustainable Consumption: Environmental Policy and the Social Sciences. London, UK: Pergamon (Elsevier), pp. 213–224.

Gaved, Mark; Dallison, Delphine; Jowers, Iestyn; Elliott-Cirigottis, Gary; Craig, Mark and Rochead, Alan (2016). RE:FORM - Reimagining Education for the Future Of Redistributed Manufacturing. In: Papadimitriou, Irini; Prescott, Andrew and Rogers, Jon eds. Engineering the Future: as part of the V&A Digital Design Weekend 2016. United Kingdom: Uniform Communications Limited, pp. 49–53.

Green, Catherine; Sobers, Shawn; Zamenopoulos, Theodore; Chapain, Caroline and Turner, Jerome (2016). Conversations about co-production. In: Hargreaves, Ian and Hartley, John eds. The creative citizen unbound: How social media and DIY culture contribute to democracy, communities and the creative economy. Bristol: Policy Press, pp. 153–181.

Gürsoy, Benay; Jowers, Iestyn and Özkar, Mine (2015). Formal descriptions of material manipulations: an exploration with cuts and shadows. In: Celani, Gabriela; Sperling, David Moreno and Franco, Juarez Moara Santos eds. Computer-Aided Architectural Design Futures. The Next City - New Technologies and the Future of the Built Environment. Communications in Computer and Information Science (527). Springer, pp. 439–457.

Harte, David; Dovey, John; Aguista, Emma and Zamenopoulos, Theodore (2016). From networks to complexity: two case studies. In: Hargreaves, Ian and Hartley, John eds. The creative citizen unbound: How social media and DIY culture contribute to democracy, communities and the creative economy. Bristol: Policy Press, pp. 129–152.

Heffron, Raphael J. and Nuttall, William J. (2017). Scotland, Nuclear Energy Policy and Independence. In: Wood, Geoffrey and Baker, Keith eds. A Critical Review of Scottish Renewable and Low Carbon Energy Policy. Energy, Climate and the Environment. Cham, Switzerland: Palgrave Macmillan, pp. 103–126.

Holden, Georgy (2010). Case study: sharing images, creating communities. In: Kear, Karen ed. Online and Social Networking Communities: A Best Practice Guide for Educators. The Open and Flexible Learning Series. Abingdon: Routledge.

Johnson, Jeffrey (2009). Embracing design in complexity. In: Alexiou, Aikaterini; Johnson, Jeffrey and Zamenopoulos, Theodore eds. Embracing complexity in design. Abingdon: Routledge, pp. 193–203.

Johnson, Jeffrey (2015). Policy Design, Planning, and Management in Global Systems Science. In: Cardin, Michel-Alexandre; Krob, Daniel; Pao, Chuen Lui; Yang, How Tan and Wood, Kristin eds. Complex Systems Design & Management Asia. Designing Smart Cities: Proceedings of the First Asia - Pacific Conference on Complex Systems Design & Management, CSD&M Asia 2014. Springer, pp. 125–132.

Johnson, Jeffrey (2012). Cities: systems of systems of systems. In: Portugali, Juval; Meyer, Han; Stolk, Egbert and Tan, Ekim eds. Complexity Theories of Cities Have Come of Age. Springer Complexity. Berlin: Springer-Verlag, pp. 153–172.

Johnson, Jeffrey; Alexiou, Katerina; Creigh-Tyte, Anne; Chase, Scott; Duffy, Alex; Eckert, Claudia; Gascoigne, Damian; Kumar, Bimal; Mitleton-Kelly, Eve; Petry, Michael; Qin, Sheng Fen; Robertson, Alec; Rzevski, George; Teymour, Necdet; Thompson, Avril; Young, Robert; Willis, Mateo and Zamenopoulos, Theodore (2007). Embracing complexity in design. In: Inns, Tom ed. Designing for the 21st Century: Interdisciplinary Questions and Insights. Aldershot: Gower Publishing Limited, pp. 129–149.

Johnson, Jeffrey and Cook, Matthew (2013). Policy design: a new area of design research and practice. In: Aiguier, Marc; Boulanger, Frédéric; Krob, Daniel and Clotilde, Marchal eds. Complex Systems in Design and Management. Heidelberg: Springer, pp. 51–62.

Johnson, Jeffrey; Fortune, Joyce and Bromley, Jane (2018). Multilevel systems and policy. In: Mitleton-Kelly, Eve; Paraskevas, Alexandros and Day, Christopher eds. Handbook of Research Methods in Complexity Science: Theory and Applications. London: Edward Elgar Publishing, pp. 363–387.

Johnson, Jeffrey; Fortune, Joyce and Bromley, Jane M. (2017). Systems, Networks and Policy. In: Johnson, Jeffrey; Nowak, Andrzej; Ormerod, Paul; Rosewell, Bridget and Zhang, Yi-Chang eds. Non-Equilibrium Social Science and Policy: Introduction and Essays on New and Changing Paradigms in Socio-Economic Thinking. Understanding Complex Systems. Cham, Switzerland: Springer, pp. 111–134.

Johnson, Jeffrey; Ormerod, Paul; Nowak, Andrzej; Rosewell, Bridget and Zhang, Yi-Cheng (2017). Non-Equilibrium Social Science and Policy. In: Johnson, Jeffrey; Nowak, Andrzej; Ormerod, Paul; Rosewell, Bridget and Zhang, Y-Cheng eds. Non-Equilibrium Social Science and Policy: Introduction and Essays on New and Changing Paradigms in Socio-Economic Thinking. Understanding Complexity. Cham, Switzerland: Springer, pp. 1–17.

Johnson, Jeffrey and Price, Blaine A. (2004). Complexity science and representation in robot soccer. In: Polani, Daniel; Browning, Brett; Bonarini, Andrea and Yoshida, Kazuo eds. RoboCup 2003: Robot Soccer World Cup VII. Lecture Notes in Computer Science, 3020. Berlin: Springer, pp. 67–76.

Johnson, Jeffrey H. (2016). Embracing n-ary Relations in Network Science. In: Wierzbicki, Adam; Brandes, Ulrik; Schweitzer, Frank and Pedreschi, Dino eds. Advances in Network Science: 12th International Conference and School, NetSci-X 2016, Wroclaw, Poland, January 11-13, 2016, Proceedings. Lecture Notes in Computer Science (9564). Switzerland: Springer, pp. 147–160.

Jones, Derek (2013). An alternative (to) reality. In: Childs, Mark and Peachey, Anna eds. Understanding Learning in Virtual Worlds. Human–Computer Interaction Series. London: Springer London, pp. 1–20.

Jowers, Iestyn and Earl, Chris (2018). Visual Structures of Embedded Shapes. In: Lee, Ji-Hyun ed. Computational Studies on Cultural Variation and Heredity. KAIST Research Series. Springer, pp. 175–187.

Jowers, Iestyn; Earl, Chris and Stiny, George (2017). Shape computations without compositions. In: Çağdaş, G.; Özkar, M.; Gül, L. F. and Gürer, E. eds. Computer-Aided Architectural Design. Future Trajectories. 17th International Conference, CAAD Futures 2017, Istanbul, Turkey, July 12-14, 2017, Selected Papers. Springer, pp. 348–365.

Jowers, Iestyn; Prats, Miquel; Eissa, Hesham and Lee, Ji-Hyun (2010). A study of emergence in the generation of Islamic geometric patterns’. In: Dave, B.; Li, A. I.; Gu, N. and Park, H.-J. eds. New Frontiers: Proceedings of the 15th International Conference on Computer-Aided Architectural Design Research in Asia CAADRIA 2010. Hong Kong: CAADRIA, pp. 39–48.

Lane, Andy and Reynolds, Martin (2017). Systems thinking in practice: mapping complexity. In: Oreszczyn, Sue and Lane, Andy eds. Mapping environmental sustainability: reflecting on systemic practices for participatory research. Bristol: Policy Press, pp. 17–44.

Lotz, Nicole and Jones, Derek (2014). Just breathe. In: Williams, Alison; Jones, Derek and Robertson, Judy eds. BITE: Recipes for Remarkable Research. Rotterdam: Sense Publishers, pp. 144–145.

Luck, Rachael (2016). What is it about space that is important in interaction? … Let’s take the world from a situated point of view. In: Dalton, Nicholas S.; Schnädelbach, Holger; Wiberg, Mikael and Varoudis, Tasos eds. Architecture and Interaction: Human Computer Interaction in Space and Place. Human - Computer Interaction Series. Springer, pp. 37–52.

Luck, Rachael (2015). Towards the formulation of a research question: guidance through the glass bead game of research design. In: Rogers, Paul and Yee, Joyce eds. Routledge Companion to Design Research. Abingdon: Routledge, pp. 142–150.

Luck, Rahael; Haenlein, Hans and Bright, Keith T. (2001). Project briefing for an inclusive universal design process. In: Preiser, Wolfgang F. E. and Ostroff, Elaine eds. Universal Design Handbook. New York: McGraw-Hill Professional, pp. 4441–4449.

Malmqvist, Tove; Moncaster, Alice; Rasmussen, Freja and Birgisdottir, Harpa (2020). Circularity in the built environment – a call for a paradigm shift. In: Brandão, M; Lazarevic, D and Finnveden, G eds. Handbook of the Circular Economy. Edward Elgar Publishing Ltd.

McKay, Alison; Chase, Scott; Garner, Steven; Jowers, Iestyn; Prats, Miquel; Hogg, David; Chau, Hau Hing; de Pennington, Alan; Earl, Christopher and Lim, Sungwoo (2010). Design synthesis and shape generation. In: Inns, Tom ed. Designing for the 21st Century, Volume 2. Ashgate Publishing Ltd, pp. 304–321.

McKay, Alison; Jowers, Iestyn; Chau, Hau Hing; De Pennington, Alan and Hogg, David C. (2008). Computer aided design: an early shape synthesis system. In: Yan, Xiu-Tian; Eynard, Benoit and Ion, William J. eds. Global Design to Gain a Competitive Edge: An Holistic and Collaborative Design Approach based on Computational Tools. London: Springer, pp. 3–12.

Metzler, Torsten; Jowers, Iestyn; Kain, Andreas and Lindemann, Udo (2013). Development of cognitive products via interpretation of system boundaries. In: Chakrabarti, Amaresh and Prakash, Raghu V. eds. ICoRD'13: Global Product Development. Lecture Notes in Mechanical Engineering. New Delhi: Springer India, pp. 163–174.

Peake, Stephen (2003). Climate Change: Global Responses Under Uncertainty. In: Blowers, Andrew and Hinchliffe, Stephen eds. Envrironmental Responses. John Wiley & Sons Ltd in association with The Open University, pp. 186–235.

Peake, Stephen (2007). Carbon trading: opportunities and issues. In: Elliott, David ed. Sustainable Energy: Opportunities and limitations. Energy, Climate and Environment Series. Basingstoke, UK: Palgrave Macmillan, pp. 190–211.

Peake, Stephen (2012). The business of design. In: Garner, Steven and Evans, Chris eds. Design and Designing: A Critical Introduction. London: Berg.

Peake, Stephen (2012). What is a low carbon society? In: Herring, Horace ed. Living in a Low-Carbon Society in 2050. Energy, Climate and the Environment. Basingstoke: Palgrave, pp. 15–27.

Peake, Stephen (1994). Taking a Walk on the Demand Side. In: Hope, Chris and Owens, Susan E. eds. Moving Forward: Overcoming the Obstacles to a Sustainable Transport Policy. Cambridge: White Horse Press.

Peake, Stephen and Everett, Bob (2017). Introducing Renewable Energy. In: Peake, Stephen ed. Renewable Energy: Power for a Sustainable Future. Oxford: Oxford University Press, pp. 1–28.

Peake, Stephen and Everett, Bob (2017). Renewable Energy Futures. In: Peake, Stephen ed. Renewable Energy: Power for a Sustainable Future. Oxford: Oxford University Press, pp. 597–616.

Peake, Stephen; Everett, Bob and Boyle, Godfrey (2012). Introducing Energy Systems and Sustainability. In: Everett, Bob; Boyle, Godfrey; Peake, Stephen and Ramage, Janet eds. Energy Systems and Sustainability: Power for a Sustainable Future (2nd ed.). Oxford: Oxford University Press, pp. 1–34.

Peake, Stephen; Everett, Bob; Boyle, Godfrey and Ramage, Janet (2012). Penalties: assessing the environmental and health impacts of energy use. In: Boyle, Godfrey; Everett, Bob; Peake, Stephen and Ramage, Janet eds. Energy Systems and Sustainability: Power for a Sustainable Future (2nd ed.). Oxford: Oxford University Press, pp. 505–569.

Prats, Miquel and Earl, C.F. (2006). Exploration through drawings in the conceptual stages of product design. In: Gero, J. ed. Design Computing and Cognition. Springer, pp. 83–102.

Reynolds, M. and Holwell, S. (2020) 'Chapter 1: Introducing systems approaches'. Systems approaches to making change: a practical guide 2nd Edn. pp. 1-24. London: Open University and Springer

Reynolds, Martin (2017). Evaluating diagramming as praxis. In: Oreszczyn, Sue and Lane, Andy eds. Mapping Environmental Sustainability: Reflecting on systemic practices for participatory research. University of Bristol: Policy Press, pp. 207–230.

Reynolds, Martin and Holwell, Sue (2020). Chapter 7 Epilogue: Systems Approaches and Systems Practice. In: Reynolds, Martin and Holwell, Sue eds. Systems Approaches to Making Change: A Practical Guide. 2nd Edn. London: Open University and Springer, pp. 307–321.

Reynolds, Martin and Wilding, Helen (2017). Boundary critique: an approach for framing methodological design. In: de Savigny, Don; Blanchet, Karl and Adam, Taghreed eds. Applied Systems Thinking For Health Systems Research: A Methodological Handbook. Maidenhead: Open University Press, pp. 38–56.

Roy, Robin (2012). Case studies in low carbon living. In: Herring, Horace ed. Living in a Low Carbon Society in 2050. Energy, Climate and the Environment. Basingstoke: Palgrave Macmillan, pp. 95–120.

Roy, Robin (2009). Designing for sustainability. In: Wilson, Gordon; Furniss, Pamela and Kimbowa, Richard eds. Environment, Development, and Sustainability: Perspectives and cases from around the world. Oxford, UK: Oxford University Press, pp. 203–212.

Roy, Robin; Caird, Sally and Potter, Stephen (2007). People centred eco-design: consumer adoption of low and zero carbon products and systems. In: Murphy, Joseph ed. Governing Technology for Sustainability. London, UK: Earthscan, pp. 41–62.

Roy, Robin; Potter, Stephen and Yarrow, Karen (2004). Towards sustainable higher education: environmental impacts of conventional campus, print-based and electronic/open learning systems. In: Murphy, D; Carr, R; Taylor, J. and Wong, T.M eds. Distance Education & Technology: Issues and Practice. Hong Kong: Open University of Hong Kong Press, pp. 129–145.

Roy, Robin and Tovey, Michael (2012). Bicycle design: creativity and innovation. In: Tovey, Michael ed. Design for Transport: A User-Centred Approach to Vehicle Design and Travel. Farnham UK: Gower, pp. 167–200.

Schadewitz, Nicole (2009). Innovative collaborative design in international interaction design summer schools. In: Poggenpohl, Sharon and Sato, Keiichi eds. Design Integrations: Research and Collaboration. UK: Intellect, pp. 230–250.

Ulrich, Werner and Reynolds, Martin (2020). Ch. 6. Critical Systems Heuristics: The Idea and Practice of Boundary Critique. In: Reynolds, Martin and Holwell, Sue eds. Systems Approaches to Making Change: A Practical Guide. 2nd Edn. London: Open University and Springer, pp. 255–305.

Warren, James (2001). Cost implications of various Euro 4 and 5 after treatment solutions for heavy duty diesel vehicles. In: Institution of, Mechanical Engineers ed. 21st Century Emissions Technology. IMechE Conference Transactions 2000-2002. Bury St Edmunds, UK: Professional Engineering Limited for IMechE, pp. 35–45.

Warren, James (2017). Deep Geothermal Energy. In: Peake, Stephen ed. Renewable Energy: Power for a Sustainable Future (Fourth Edition). Oxford: Oxford University Press, pp. 489–540.

Warren, James (2009). Corporate responsibility in practice: building an eco-city from scratch. In: Wilson, Gordon; Furniss, Pamela and Kimbowa, Richard eds. Environment, Development, and Sustainability: Perspectives and cases from around the world. Oxford, UK: Oxford University Press, pp. 213–221.

Warren, James (2009). Sustainable transport systems: learning from Cuba. In: Wilson, Gordon; Furniss, Pamela and Kimbowa, Richard eds. Environment, Development, and Sustainability: Perspectives and cases from around the world. Oxford, UK: Oxford University Press, pp. 54–64.

Warren, James P. and Rhodes, Ed (2006). 'Smart' design: greening the Total Product System. In: Sarkis, Joseph ed. Greening the supply chain. Springer Verlag UK, pp. 271–291.

Zamenopoulos, Theodore (2009). The mathematical conditions of design ability. In: Alexiou, Katerina; Johnson, Jeffrey and Zamenopoulos, Theodore eds. Embracing Complexity in Design. London: Routledge, pp. 95–119.

Zamenopoulos, Theodore and Alexiou, Katerina (2003). Computer-aided creativity and learning in distributed cooperative human-machine networks. In: Chiu, M-L.; Tsou, J-Y.; Kvan, T.; Morozumi, M. and Jeng, T-S. eds. Digital Design: research and practice, Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures. Dordrecht, The Netherlands: Kluwer Academic Publishers, pp. 191–201.

Zamenopoulos, Theodore and Alexiou, Katerina (2012). Complexity: what designers need to know. In: Garner, Steve and Evans, Chris eds. Design and Designing: a Critical Introduction. Berg.

Zamenopoulos, Theodore and Alexiou, Katerina (2003). Structuring the plan design process as a coordination problem - the paradigm of distributed learning control coordination. In: Longley, Paul A. and Batty, Michael eds. Advanced Spatial Analysis: The CASA Book of GIS. U.S: ESRI Press, pp. 407–426.

Zamenopoulos, Theodore and Alexiou, Katerina (2012). A complexity theoretic view of cities as artefacts of design intentionality. In: Portugali, Juval; Meyer, Han; Stolk, Egbert and Tan, Ekim eds. Complexity Theories of Cities Have Come of Age: An Overview with Implications to Urban Planning and Design. Berlin: Springer, pp. 327–346.

Zamenopoulos, Theodore and Alexiou, Katerina (2010). The influence of complexity science in design: theoretical and methodological tools. In: Tsoukala, K.; Daniil, M. and Pantelidou, H. eds. Postmodern Approaches. Thessaloniki, GR: Epikentro.

Zamenopoulos, Theodore; Alexiou, Katerina; Alevizou, Giota; Chapain, Caroline; Sobers, Shawn and Williams, Andy (2016). Varieties of Creative Citizenship. In: Hargreaves, Ian and Hartley, John eds. The Creative Citizen Unbound: How social media and DIY culture contribute to democracy, communities and the creative economy. Bristol: Policy Press, pp. 103–128.

Journal ItemTo Top

Abenyenga, Olivia; Burgess, Paul J.; Cook, Matthew and Morris, Joe (2009). Application of an ecosystem function framework to perceptions of community woodlands. Land Use Policy, 26(3) pp. 551–557.

Alexiou, Katerina (2011). Understanding design as a multiagent coordination process: distribution, complexity, and emergence. Environment and Planning B: Planning and Design, 38(2) pp. 248–266.

Alexiou, Katerina (2010). Coordination and emergence in design. CoDesign: International Journal of CoCreation in Design and the Arts, 6(2) pp. 75–97.

Ashley, S. F.; Vaughan, G. J.; Nuttall, W. J. and Thomas, P. J. (2017). Considerations in relation to off-site emergency procedures and response for nuclear accidents. Process Safety and Environmental Protection, 112(A) pp. 77–95.

Ashley, S.F.; Vaughan, G.J.; Nuttall, W.J.; Thomas, P.J. and Higgins, N.A. (2017). Predicting the cost of the consequences of a large nuclear accident in the UK. Process Safety and Environmental Protection, 112 pp. 96–113.

Behara, Amar Kumar; McKay, Alison; Earl, Christopher F.; Chau, Hau Hing; Robinson, Mark A.; de Pennington, Alan and Hogg, David C. (2019). Sharing design definitions across product life cycles. Research in Engineering Design, 30(3) pp. 339–361.

Bhamra, T.; Evans, S.; Zwan, F. van der and Cook, M. (2001). Moving from eco-products to eco-services. Journal of Design Research, 1(2)

Blackwell, A. D; Eckert, C. M.; Bucciarelli, L. L and Earl, C. F. (2009). Witnesses to design: A phenomenology of comparative design. Design Issues, 25(1) pp. 36–47.

Bohm, Matthew; Eckert, Claudia; Sen, Chiradeep; Srinivasan, Venkatamaran; Summers, Joshua D. and Vermaas, Pieter (2017). Thoughts on Benchmarking of Function Modeling: Why and How. Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 31(4) pp. 393–400.

Booth, Joran W.; Reid, Tahira; Eckert, Claudia and Ramani, Karthik (2015). Comparing functional analysis methods for product dissection tasks. Journal of Mechanical Design, 137(8), article no. 081101.

Bruce, Margaret; Potter, Stephen and Roy, Robin (1995). The risks and rewards of design investment. Journal of Marketing Management, 11 pp. 403–417.

Bruce, Margaret and Roy, Robin (1991). Integrating marketing and design for commercial benefit. Marketing Intelligence and Planning, 9(5) pp. 23–28.

Caird, Sally; Hallett, Stephen and Potter, Stephen (2013). The Open2-Innova8ion tool - a software tool for rating organisational innovation performance. Technovation: The International Journal of Technological Innovation, Entrepreneurship and Technology Management, 33(10-11) pp. 381–385.

Caird, Sally and Roy, Robin (2006). Household ecological footprints - demographics and sustainability. Journal of Environmental Assessment Policy and Management, 8(4) pp. 407–429.

Caird, Sally; Roy, Robin and Wield, David (1997). Team approaches to developing innovative projects and processes. International Journal of Innovation Management, 1(4) pp. 333–354.

Caird, Sally; Roy, Robin and Wield, David (1994). Problems Experienced by Engineers with Environmental Product Development Projects. Technology Analysis and Strategic Management, 6(2) pp. 177–188.

Caird, Sally P. and Hallett, Stephen H. (2019). Towards evaluation design for smart city development. Journal of Urban Design, 24(2) pp. 188–209.

Castán Broto, Vanesa; Glendinning, Stephanie; Dewberry, Emma; Walsh, Claire and Powell, Mark (2014). What can we learn about transitions for sustainability from infrastructure shocks? Technological Forecasting and Social Change, 84 pp. 186–196.

Chau, Hau Hing; McKay, Alison; Earl, Christopher F.; Behera, Amar Kumar and de Pennington, Alan (2018). Exploiting lattice structures in shape grammar implementations. Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 32(2) pp. 147–161.

Collins, Hilary (2013). Can Design Thinking Still Add Value? Design Management Review, 24(2) pp. 35–39.

Cook, M. (2014). Fluid transitions to more sustainable product service systems. Environmental Innovation and Societal Transitions, 12 pp. 1–13.

Cook, M.; Gottberg, A.; Angus, A. and Longhurst, P. (2012). Receptivity to the production of product service systems in the UK construction and manufacturing sectors: a comparative analysis. Journal of Cleaner Production, 32 pp. 61–70.

Cook, M. B.; Bhamra, T. A. and Lemon, M. (2006). Transfer and application of product service systems: from academia to UK manufacturing firms. Journal of Cleaner Production, 14(17) pp. 1455–1465.

Crilly, Michael; Lemon, Mark; Wright, Andrew J.; Cook, Matthew B. and Shaw, David (2012). Retrofitting homes for energy efficiency: an integrated approach to innovation in the low carbon overhaul of social housing. Energy and Environment, 23(6-7) pp. 1027–1056.

Crompton, Sally; Roy, Robin and Caird, Sally (2002). Household ecological footprinting for active distance learning and challenge of personal lifestyles. International Journal of Sustainability in Higher Education, 3(4) pp. 313–323.

Cross, Nigel (2001). Can a machine design? Design Issues, 17(4) pp. 44–50.

Denning, Peter J. and Johnson, Jeffrey (2021). Science is not another opinion. Communications of the ACM, 64(3) pp. 36–38.

Dewberry, E. L.; Cook, M; Gottberg, A; Longhurst, P. J. and Angus, A (2013). Critical Reflections on Designing Product Service Systems. The Design Journal, 16(4) pp. 408–430.

Dewberry, Emma (2003). Designing out crime: Insights from ecodesign. Security Journal, 16(1) pp. 51–62.

Dewberry, Emma and Goggin, Phillip (1996). Spaceship ecodesign. Co-Design: the interdisciplinary journal of design and contextual studies(5/6) pp. 12–17.

Dewberry, Emma and Sherwin, Chris (2002). Visioning Sustainability through Design. Greener Management International(37) pp. 125–138.

Dolan, T.; Cook, M. B. and Angus, A. J. (2011). Financial appraisal of wet mesophilic AD technology as a renewable energy and waste management technology. Science of the Total Environment, 409(13) pp. 2460–2466.

Earl, Chris (2018). [Obituary] Lionel March: Sharing ideas through research. Environment and Planning B: Urban Analytics and City Science, 45(4) 598 -600.

Eckert, C. M.; Blackwell, A. F.; Bucciarelli, L. L. and Earl, C. F. (2010). Shared conversations across design. Design Issues, 26(3) pp. 27–39.

Eckert, Claudia (2013). That which is not form: the practical challenges in using functional concepts in design. Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 27(3) pp. 217–231.

Eckert, Claudia; Blackwell, Alan; Stacey, Martin; Earl, Christopher and Church, Luke (2012). Sketching across design domains: roles and formalities. Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 26(3) pp. 245–266.

Eckert, Claudia; Isaksson, Ola; Eckert, Calandra; Coeckelbergh, Mark and Hagström, Malin Hane (2020). Data Fairy in Engineering Land: The Magic of Data Analysis as a Sociotechnical Process in Engineering Companies. Journal of Mechanical Design, 142(12), article no. 121402.

Eckert, Claudia and Jankovic, Marija (2016). System architecture design. Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 30 pp. 214–216.

Eckert, Claudia; Ruckpaul, Anne; Alink, Thomas and Albers, Albert (2012). Variations in functional decomposition for an existing product: experimental results. Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 26(2) pp. 107–128.

Eckert, Claudia; Stacey, Martin and Earl, Christopher (2013). Formality in design communication. Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 27(2) pp. 91–103.

Eckert, Claudia and Zolghadri, Marc (2010). Editorial. International Journal of Product Development, 12(1) pp. 1–5.

Eckert, Claudia M. and Clarkson, P. John (2010). Planning development processes for complex products. Research in Engineering Design, 21(3) pp. 153–171.

Eckert, Claudia M.; Keller, Rene; Earl, Chris and Clarkson, P. John (2006). Supporting change processes in design: Complexity, prediction and reliability. Reliability Engineering and System Safety, 91(12) pp. 1521–1534.

Eckert, Claudia M.; Wynn, David C.; Maier, Jakob F.; Albers, Albert; Bursac, Nikola; Xin Chen, Hilario L.; Clarkson, P. John; Gericke, Kilian; Gladysz, Bartosz and Shapiro, Daniel (2017). On the integration of product and process models in engineering design. Design Science (In Press).

Elliott, David (2009). Marine renewables: a new innovation frontier. Technology Analysis and Strategic Management, 21(2) pp. 267–275.

Ellis, Jane and Peake, Stephen (1996). Renewable energy promotion in IEA countries. Renewable Energy, 9(1-4) pp. 1175–1178.

Enoch, Marcus; Warren, James P.; Valdes Rios, Humberto and Henríquez Menoyo, Enrique (2004). The Effect of economic restrictions on transport practices in Cuba. Transport Policy, 11(1) pp. 67–76.

Enoch, Marcus P. and Warren, James P. (2008). Automobile use within selected island states. Transportation Research Part A: Policy and Practice, 42(9) pp. 1208–1219.

Faeirs, Adam; Cook, Matt and Neame, Charles (2007). Towards a contemporary approach for understanding consumer behaviour in the context of domestic energy use. Energy Policy, 35(8) pp. 4381–4390.

Faeirs, Adam; Neame, Charles and Cook, Matt (2007). The adoption of domestic solar power systems: do consumers assess product attributes in a stepwise process? Energy Policy, 35(6) pp. 3418–3423.

Fitton, Sarah L. and Moncaster, Alice M. (2019). Arguments for a Co-production Approach to Community Flood Protection. Proceedings of the Institution of Civil Engineers - Engineering Sustainability, 172(7) pp. 335–344.

Fletcher, Kate and Dewberry, Emma (2002). Demi: A case study in design for sustainability. International Journal of Sustainability in Higher Education, 3(1) pp. 38–47.

Frohlich, D.; Corrigan-Kavanagh, E.; Bober, M.; Yuan, H.; Sporea, R.; Le Borgne, B.; Scarles, C.; Revill, G.; van Duppen, J.; Brown, A. W. and Beynon, M. (2019). The Cornwall a-book: An Augmented Travel Guide Using Next Generation Paper. The Journal of Electronic Publishing, 22(1)

Gottberg, Annika; Longhurst, Phillip J. and Cook, Matthew B. (2010). Exploring the potential of product service systems to achieve household waste prevention on new housing developments in the UK. Waste Management and Research, 28(3) pp. 228–235.

Gottberg, Annika; Morris, Joe; Pollard, Simon; Mark-Herbert, Cecilia and Cook, Matthew (2006). Producer responsibility, waste minimisation and the WEEE Directive: case studies in eco-design from the European lighting sector. Science of the Total Environment, 359 pp. 38–56.

Griffin, Monica; de Weck, Olivier; Bounova, Gerganga; Keller, Rene; Eckert, Claudia and Clarkson, P. John (2009). Change propagation analysis in complex technical systems. Journal of Mechanical Design, 131(8) 081001.

Herring, Horace and Roy, Robin (2002). Sustainable services, electronic education and the rebound effect. Environmental Impact Assessment Review, 22(5) pp. 525–542.

Hicks, Chris; McGovern, Tom and Earl, Chris F. (2001). A Typology of UK Engineer-to-Order Companies. International Journal of Logistics: research and applications, 4(1) pp. 43–56.

Hicks, Christian; Song, Dong-Ping and Earl, Christopher F. (2006). An ordinal optimization based evolution strategy to schedule complex make-to-order products. International Journal of Production Research, 44(22) pp. 4877–4895.

Hodgson, Paul; Potter, Stephen; Warren, James and Gillingwater, David (2013). Can bus really be the new tram? Research in Transportation Economics, 39(1) pp. 158–166.

Hope, Chris; Parker, Jonathan and Peake, Stephen (1992). A pilot environmental index for the UK in the 1980s. Energy Policy, 20(4) pp. 335–343.

Hope, Chris; Parker, Jonathan and Peake, Stephen (1991). A pilot Environmental Index for the United Kingdom: Results for the last decade. Statistical Journal of the United Nations Economic Commission for Europe, 8(1) pp. 85–107.

Jankovic, Marija and Eckert, Claudia (2016). Architecture decisions in different product classes for complex products. Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 30 pp. 217–234.

Jarrett, T. A. W.; Eckert, C. M.; Caldwell, N. H. M. and Clarkson, P. J. (2011). Engineering change: an overview and perspective on the literature. Research in Engineering Design, 22(2) pp. 103–124.

Jazaeri, Hedieh; Bouchard, P. John; Hutchings, Michael T.; Spindler, Mike W.; Mamun, Abdullah A. and Heenan, Richard K. (2019). An Investigation into Creep Cavity Development in 316H Stainless Steel. Metals, 9(3), article no. 318.

Jeffries, K. K.; Zamenopoulos, T. and Green, A. J. K. (2018). Design creativity, technical execution and aesthetic appeal: a CAT with caveats (Part 2). International Journal of Design Creativity and Innovation, 6(1-2) pp. 66–79.

Johnson, J.; Buckingham Shum, S.; Willis, A.; Bishop, S.; Zamenopoulos, T.; Swithenby, S.; MacKay, R.; Merali, Y.; Lorincz, A.; Costea, C.; Bourgine, P.; Louçã, J.; Kapenieks, A.; Kelly, P.; Caird, S.; Bromley, J.; Deakin Crick, R.; Goldspink, C.; Collet, P.; Carbone, A. and Helbing, D. (2012). The FuturICT education accelerator. European Physical Journal - Special Topics, 214 pp. 215–243.

Johnson, J. H. (2006). Can complexity help us better understand risk? Risk Management, 8(4) pp. 227–267.

Johnson, J. H. (1981). The Q-analysis of road traffic systems. Environment and Planning B. Planning and Design, 8(2) pp. 141–189.

Johnson, Jeffrey (2010). The future of the social sciences and humanities in the science of complex systems. Innovation: The European Journal of Social Science Research, 23(2) pp. 115–134.

Johnson, Jeffrey (2005). Complexity science in collaborative design. CoDesign: International Journal of CoCreation in Design and the Arts, 1(4) pp. 223–242.

Johnson, Jeffrey (2003). Children, robotics, and education. Artificial Life and Robotics, 7(1-2) pp. 16–21.

Johnson, Jeffrey and Iravani, Pejman (2007). The multilevel hypernetwork dynamics of complex systems of robot soccer agents. ACM Transactions on Autonomous and Adaptive Systems, 2(2)

Johnson, Jeffrey and Simon, Jean-Claude (2001). Fundamental structures in the design of machine vision systems. Mathematical Geology, 33(3) pp. 331–352.

Johnson, Jeffrey; Tesei, Luca; Piangerelli, Marco; Merelli, Emanuela; Paci, Riccardo; Stojanovic, Nenad; Leitão, Paulo; Barbosa, José and Amador, Marco (2018). Big Data: Business, Technology, Education, and Science. Ubiquity, 2018(July) pp. 1–13.

Jowers, Iestyn and Earl, Christopher (2011). Implementation of curved shape grammars. Environment and Planning B: Planning and Design, 38(4) pp. 616–635.

Jowers, Iestyn; Gaved, Mark; Dallison, Delphine; Elliott-Cirigottis, Gary; Rochead, Alan and Craig, Mark (2017). A case study in online formal/informal learning: was it collaborative or cooperative learning? Design and Technology Education: an International Journal, 22(1)

Jowers, Iestyn; Hogg, David C.; McKay, Alison; Chau, Hau Hing and de Pennington, Alan (2010). Shape detection with vision: implementing shape grammars in conceptual design. Research in Engineering Design, 21(4) pp. 235–247.

Kear, Karen; Jones, Allan; Holden, Georgina and Curcher, Mark (2016). Social technologies for online learning: theoretical and contextual issues. Open Learning: The Journal of Open, Distance and e-Learning, 31(1) pp. 42–53.

Keller, R.; Eckert, C. M. and Clarkson, P. J. (2009). Using an engineering change methodology to support conceptual design. Journal of Engineering Design, 20(6) pp. 1466–1837.

Lemon, Mark; Craig, John and Cook, Matthew (2011). Looking in or looking out? top-down change and operational capability. Historical Social Research, 36(1) pp. 143–159.

Liu, Yan; Eckert, Claudia; Yannou-Le Bris, Gwenola and Petit, Gaëlle (2019). A fuzzy decision tool to evaluate the sustainable performance of suppliers in an agrifood value chain. Computers & Industrial Engineering, 127 pp. 196–212.

Lloyd, Peter and Jones, Derek (2013). Everyday creativity in design process. Art, Design & Communication in Higher Education, 12(2) pp. 247–263.

Lotz, Nicole; Law, Effie Lai-Chong and Nguyen-Ngoc, Anh Vu (2014). A process model for developing learning design patterns with international scope. Educational Technology Research and Development, 62(3) pp. 293–314.

Luck, Rachael (2013). Articulating (mis)understanding across design discipline interfaces at a design team meeting. Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 27(2) pp. 155–166.

MacKay, A.; Hau Hing, C.; Earl, C. F.; Behera, A. K.; de Pennington, A. and Hogg, D. C. (2019). A lattice-based approach for navigating design configuration spaces. Advanced Engineering Informatics, 42, article no. 100928.

Maier, Jakob F.; Eckert, Claudia and Clarkson, P. John (2019). Experimental investigation of the implications of model granularity for design process simulation. Journal of Mechanical Design, 147(7), article no. 071101.

Maier, Jakob F.; Eckert, Claudia M. and Clarkson, P. John (2017). Model granularity in engineering design – concepts and framework. Design Science, 3, article no. e1.

Malmqvist, Tove; Nehasilova, Maria; Moncaster, Alice; Birgisdottir, Harpa; Nygaard Rasmussen, Freja and Potting, Jose (2018). Design and construction strategies for reducing embodied impacts from buildings – Case study analysis. Energy and Buildings, 166 pp. 35–47.

McKay, Alison; Jowers, Iestyn; Chau, Hau Hing; De Pennington, Alan and Hogg, David C. (2011). Computer-aided design synthesis: an application of shape grammars. International Journal of Product Development, 13(1) pp. 4–15.

Moncaster, Alice and Morris, Carol (2019). Editorial: Gender and Intersectionality in Engineering. International Journal of Gender, Science and Technology, 11(1) pp. 1–9.

Moncaster, Alice; Rasmussen, Freja; Malmqvist, Tove; Houlihan Wiberg, Aoife and Birgisdottir, Harpa (2019). Widening understanding of low embodied impact buildings: results and recommendations from 80 multi-national quantitative and qualitative case studies. Journal of Cleaner Production, 235 pp. 378–393.

Mootien, Namasoondrum P.; Warren, James P.; Morris, Dick and Enoch, Marcus P. (2013). Mapping expert perspectives of the aviation sector. International Journal of Environmental Technology and Management, 16(3) pp. 179–202.

Moullec, Marie-Lise; Jankovic, Marija and Eckert, Claudia (2016). Selecting system architecture: What a single industrial experiment can tell us about the traps to avoid when choosing selection criteria. Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 30 pp. 250–262.

Nuttall, William J.; Ashley, Stephen F. and Heffron, Raphael J. (2017). Compensating for severe nuclear accidents: An expert elucidation. Process Safety and Environmental Protection, 112(A) pp. 131–142.

Oliver, Nick; Dostaler, Isabelle and Dewberry, Emma (2004). New product development benchmarks: The Japanese, North American, and UK consumer electronics industries. Journal of High Technology Management Research, 15(2) pp. 249–260.

Peake, Stephen (2005). Epistemologies of Climate Change: Science, Stories and Scepticism. Organization and Environment, 18(4) pp. 495–499.

Peake, Stephen (2005). COP10 Report: The tango goes on. Refocus, 6(1) pp. 54–55.

Peake, Stephen (2012). [Book Review] The Inquisition of Climate Science. Organization and Environment, 25(2) pp. 199–201.

Peake, Stephen and Hope, Chris (1994). Sustainable mobility in context: Three transport scenarios for the UK. Transport Policy, 1(3) pp. 195–207.

Potter, Stephen and Roy, Robin (2000). Using scenarios to identify innovation priorities in the UK railway industry. International Journal of Innovation Management, 4(2) pp. 229–252.

Powell, Mark; Glendinning, Stephanie; Castan Broto, Vanesa; Dewberry, Emma and Walsh, Claire (2014). Shaped by Shock: Staff on the Emergency Department 'Shop Floor'. Anthropology in Action, 21(2) pp. 14–22.

Poznik, Michael; Stacey, Martin; Hillerbrand, Rafaela and Eckert, Claudia (2020). Designing as Playing Games of Make-Believe. Design Science (In press).

Prats, M.; Earl, C.; Garner, S. and Jowers, Iestyn (2006). Shape exploration of designs in a style: toward generation of product designs. Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 20(3) pp. 201–215.

Prieto, P. A.; Wright, D. K.; Qin, S. F. and Lim, S. W. (2007). A novel desktop computer-aided design system for early form design developments. Proceedings of the Institution of Mechanical Engineers, Part B, Journal of Engineering Manufacture, 221(7) pp. 277–288.

Rapanta, Chrysi; Maina, Marcelo; Lotz, Nicole and Bacchelli, Alberto (2013). Team design communication patterns in e-learning design and development. Educational Technology Research and Development, 61(4) pp. 581–605.

Rasoulifar, Golnoosh; Prudhomme, Guy and Eckert, Claudia (2015). Communicating consumer needs in the design process of branded products. Journal of Mechanical Design, 137(7), article no. 071404.

Rauws, W.S.; Cook, M. and van Dijk, T. (2014). How to Make Development Plans Suitable for Volatile Contexts. Planning Practice and Research, 29(2) pp. 133–151.

Robertson, A.; Lycouris, S. and Johnson, J.H. (2007). An approach to the design of interactive environments with reference to choreography, architecture, the complex systems of 4D design. International Journal of Performance Arts and Digital Media, 3(2-3) pp. 281–294.

Roy, Robin (2000). The long-term benefits of investing in new product development by SMEs. International Journal of New Product Development and Innovation Management, 1(4) pp. 281–295.

Roy, Robin (2000). Sustainable product-service systems. Futures, 32(3-4) pp. 289–299.

Roy, Robin (1996). Designing a greener product: the Hoover 'New Wave' washing machine range. Co-Design: the interdisciplinary journal of design and contextual studies(5-6) pp. 34–39.

Roy, Robin and Caird, Sally (2001). Environmental actions to reduce household ecological footprints. International Journal of Environmental Education and Information, 4(2) pp. 315–332.

Roy, Robin and Caird, Sally (2008). Design Improvements from users’ experiences of low and zero carbon technologies. International Journal of Performability Engineering, 4(4) pp. 357–370.

Roy, Robin and Potter, Stephen (1996). Managing engineering design in complex supply chains. International Journal of Technology Management, 12(4) pp. 403–420.

Roy, Robin; Potter, Stephen and Yarrow, Karen (2008). Designing low carbon higher education systems: Environmental impacts of campus and distance learning systems. International Journal of Sustainability in Higher Education, 9(2) pp. 116–130.

Roy, Robin and Reidel, Johann C. k. h. (1997). Design and innovation in successful product competition. Technovation, 17(10) pp. 537–548.

Rucco, Matteo; Sousa-Rodriges, David; Merelli, Emanuela; Johnson, Jeffrey H.; Falsetti, Lorenzo; Nitti, Cinzia and Salvi, Aldo (2015). Neural hypernetwork approach for pulmonary embolism diagnosis. BMC Research Notes, 8(617)

Rusoja, Evan; Haynie, Deson; Sievers, Jessica; Mustafee, Navonil; Nelson, Fred; Reynolds, Martin; Sarriot, Eric; Swanson, Robert Chad and Williams, Bob (2018). Thinking about complexity in health: A systematic review of the key systems thinking and complexity ideas in health. Journal of Evaluation in Clinical Practice, 24(3) pp. 600–606.

San Miguel, M.; Johnson, J. H.; Kertesz, J.; Kaski, K.; Diaz-Guilera, A.; MacKay, R. S.; Loreto, V.; Erdi, P. and Helbing, D. (2012). Challenges in complex systems science. European Physics Journal Special Topics, 214 pp. 245–271.

Schadewitz, N.; Jachna, T. and Santo, Y. (2007). Deep Space. International Journal of Architectural Computing, 5(1) pp. 146–160.

Schuler, Douglas; De Liddo, Anna; Smith, Justin and De Cindio, Fiorella (2018). Collective intelligence for the common good: cultivating the seeds for an intentional collaborative enterprise. AI & Society, 33(1) pp. 1–13.

Scott, N. A.; Frizelle, G. and Johnson, J. H. (2007). Insights into lean manufacturing from complex systems measures. International Journal of Agile Manufacturing, 10(2) pp. 125–128.

Sharp, Helen; Lotz, Nicole; Mbayi-Kwelagobe, Letsema; Woodroffe, Mark; Rajah, Dino and Turugare, Ranganai (2020). Socio-cultural factors and capacity building in Interaction Design: results of a video diary study in Botswana. International Journal of Human-Computer Studies, 135, article no. 102375.

Sklar, Elizabeth; Eguchi, Amy and Johnson, Jeffrey (2003). RoboCupJunior: learning with educational robots. AI Magazine, 24(2; Summer) pp. 43–46.

Song, D.P.; Earl, C.F. and Hicks, C. (2001). Stage due date planning for multistage assembly systems. International Journal of Production Research, 39(9) pp. 1943–1954.

Song, D.P.; Hicks, C. and Earl, C.F. (2002). Product due date assignment for complex assemblies. International Journal of Production Economics, 76(3) pp. 243–256.

Song, Dongping; Hicks, C. and Earl, C.F. (2001). Setting planned job release times in stochastic assembly systems with resource constraints. International Journal of Production Research, 39(6) pp. 1289–1301.

Stacey, Martin and Eckert, Claudia (2010). Reshaping the box: creative designing as constraint management. International Journal of Product Development, 11(3/4) pp. 241–255.

Stacey, Martin; Eckert, Claudia and Hillerbrand, Rafaela (2020). Process models: plans, predictions, proclamations or prophecies? Research in Engineering Design, 31(1) pp. 83–102.

Summers, Joshua D.; Eckert, Claudia and Goel, Ashok (2017). Function in Engineering: Benchmarking Representations and Models. Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 31(4) pp. 401–412.

Turner, Calum; Roy, Robin and Wield, David (1990). Materials: A new revolutionary generic technology? Conditions and policies for innovation. Technology Analysis and Strategic Management, 2(3) pp. 221–235.

Valdez Juarez, Alan-Miguel; Cook, Matthew; Potter, Stephen and Langendahl, Per-Anders (2018). Exploring participatory visions of smart transport in Milton Keynes. Proceedings of the Institution of Civil Engineers - Engineering Sustainability, 171(4) pp. 204–210.

Vaughan, Paul; Cook, Matthew and Trawick, Paul (2007). Toward a sociology of reuse: deconstructing the milkbottle. Sociologia Ruralis, 47(2) pp. 120–134.

Walsh, C. L.; Glendinning, S.; Castan Broto, V.; Dewberry, E. and Powell, M. (2015). Are wildcard events on infrastructure systems opportunities for transformational change? Futures, 67 pp. 1–10.

Walsh, Vivien and Roy, Robin (1985). The designer as 'gatekeeper' in manufacturing industry. Design Studies, 6(3) pp. 127–133.

Walsh, Vivien; Roy, Robin and Bruce, Margaret (1988). Competitive by design. Journal of Marketing Management, 4(2) pp. 201–216.

Walsh, Vivien; Roy, Robin; Bruce, Margaret and Potter, Stephen (1993). Perspectives on design and innovation. Creativity and Innovation Management, 2(2) pp. 78–86.

Warren, J.P.; Rhodes, E.A. and Carter, R.B. (2001). A Total Product System Concept - a case study of the smart (tm) automobile. Greener Management International, 35 pp. 89–104.

Warren, James; Morris, Emily; Enoch, Marcus; Padilla Magdaleno, Idalmis; Parra Arias, Zunilda and Guanche, Julia (2015). Developing an equitable and sustainable mobility strategy for Havana. Cities, 45 pp. 133–141.

Warren, James and Ortegon-Sanchez, Adriana (2015). Designing and modelling Havana’s future bus rapid transit. Proceedings of the Insitution of Civil Engineers - Urban Design and Planning, 169(2) pp. 104–119.

Warren, James P. and Enoch, Marcus P. (2006). Mobility, energy, and emissions in Cuba and Florida. Transportation Research Part D: Transport and Environment, 11(1) pp. 33–44.

Wynn, David C. and Eckert, Claudia M. (2017). Perspectives on iteration in design and development. Research in Engineering Design, 28(2) pp. 153–184.

Zamenopoulos, Theodore (2012). A complexity theory of design intentionality. Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 26(1) pp. 63–83.

Zamenopoulos, Theodore and Alexiou, Katerina (2007). Towards an anticipatory view of design. Design Studies, 28(4) pp. 411–436.

Zamenopoulos, Theodore; Lam, Busayawan; Alexiou, Katerina; Kelemen, Mihaela; de Sousa, Sophia; Moffat, Sue and Phillips, Martin (2021). Types, obstacles and sources of empowerment in co-design: the role of shared material objects and processes. CoDesign: International Journal of CoCreation in Design and the Arts (Early Access).

Zhou, Wei; Moncaster, Alice; Reiner, David and Guthrie, Peter (2019). Estimating Lifetimes and Stock Turnover Dynamics of Urban Residential Buildings in China. Sustainability, 11(13), article no. 3720.

Zolghadri, Marc and Eckert, Claudia (2009). Editorial. International Journal of Design Engineering, 2(4) pp. 369–379.

Zolghadri, Marc; Eckert, Claudia; Zouggar, Salah and Girard, Philippe (2011). Power-based supplier selection in product development projects. Computers in Industry, 62(5) pp. 487–500.

Conference or Workshop ItemTo Top

Aczel, James; Peake, Stephen and Hardy, Pascale (2007). What are the Capacity Gaps in e-Learning Expertise? In: Computer Assisted Learning (CAL '07), 26-28 Mar 2007, Trinity College Dublin, Ireland.

Aitchison, Iain; Dewberry, Emma and Lotz, Nicole (2015). Out of sight, out of mind: curriculum representation in design education today. In: Proceedings of the 3rd International Conference for Design Education Researchers (Vande Zande, Robin; Bohemia, Erik and Digranes, Ingvild eds.), Aalto University, pp. 1536–1551.

Alevizou, Giota; Alexiou, Katerina; Greene, Catherine and Ramster, Gail (2013). Communications by design? Intersections of creative citizenship, community media and participatory design. In: Communication and the City: Voices, Spaces, Media, 14-15 Jun 2013, Leeds, UK.

Alevizou, Panagiota; Alexiou, Katerini and Ramster, Gail (2013). Communications by design? Community spaces, neighbourhood media & creative citizens. In: IAMCR 2013 Conference: Crises, 'Creative Destruction' and the Global Power and Communication Orders, 25-29 Jun 2013, Dublin, Ireland.

Alexiou, Katerina and Zamenopoulos, Theodore (2019). Methods for researching and building capacity in codesign among non-experts. In: International Association of Societies of Design Research Conference 2019, 2-5 Sep 2019, Manchester.

Alink, Thomas; Eckert, Claudia; Ruckpaul, Anne and Albers, Albert (2010). Different function breakdowns for one existing product: experimental results. In: Design Computing and Cognition (DCC'10), Jul 2010, Stuttgart, Germany.

Allansson, R.; Blakeman, P. G.; Chandler, G. R.; Maloney, C. A.; Thoss, J. E.; Walker, A. P. and Warren, J. P. (2000). The use of the Continuously Regenerating Trap (CRTTM) and SCRTTM Systems to meet future emissions legislation. In: Fortschritt-Berichte VDI, VDI, Technical University of Vienna, Vienna, 12(420) pp. 343–355.

Ben Hamida, Sonia; Jankovic, Marija; Callot, Martine; Monceaux, Anne and Eckert, Claudia (2015). Towards a decision support framework for system architecture design. In: 20th International Conference on Engineering Design (ICED 2015), 27-30 Jul 2015, Milan.

Bhamra, Tracey and Dewberry, Emma (2007). Re-visioning design priorities through sustainability education. In: ICED 16th International Conference on Engineering Design, Design for Society - Innovation, Sustainability, Knowledge, 28-31 Aug 2007, Paris.

Caird, S.; Hudson, L. and Kortuem, G. (2017). Communication on Smart City Evaluation and Reporting In UK cities: Pilots, Demos and Experiments Case. In: Smart Cities in Smart Regions 2016: Conference Proceedings (Aalto, Anna and Montonen, Laura eds.), The publication series of Lahti University of Applied Sciences, part 27, Finland., Lahti University of Applied Sciences, Finland, pp. 20–28.

Caird, Sally; Herring, Horace and Roy, Robin (2007). Can consumers save energy? Results from surveys of consumer adoption and use of low and zero carbon technologies. In: European Council for an Energy Efficient Economy Summer Study 2007, 4-5 Jun 2007, La Colle sur Loup, Côte d’Azur, France.

Choi, Y.; Cooper, R.; Hands, D. and Lim, S. (2006). The influence of design on global competitiveness. In: EURAM (EURopean Academy of Management) 6th Annual Conference, 16-20 May 2006, Oslo, Norway, EURAM.

Choi, Youngok; Cooper, Rachel and Lim, Sungwoo (2009). Driving innovation through national business support programs in design: a study of the UK and South Korea design policy. In: EURAM 9th Annual Conference, 11-14 May 2009, Liverpool.

Cook, M. B. and Bhamra, T. A. (2002). Evolutionary perspectives on adoption of the eco-service concept. In: Towards Sustainable Product Design 7th International Conference, 28-29 Oct 2002, London, U.K..

Cook, Matthew (2010). Sustainable urban design experiments. In: ECCS 10 European Conference on Complex Systems, 13-17 Sep 2010, Lisbon, Portugal.

Cook, Matthew and Bhamra, T. A. (2001). Eco-services: a model for the diffusion of service orientated concepts in a local economy. In: Business and Environment Conference, Spring 2001, Cardiff, Wales.

Cook, Matthew B. and Bhamra, Tracy (2004). The transfer and application of sustainable product service Systems in UK manufacturing companies. In: 2nd SusProNet Conference, 3-4 Jun 2004, Brussels, Belgium.

Crommentuijn-Marsh, Philipa; Eckert, Claudia and Potter, Stephen (2010). Consumer behaviour towards sustainability in fashion. In: KEER2010: Iinternational Conference on Kansei Engineering and Emotion Research 2010, 2-4 Mar 2010, Paris, France.

Crompton, Sally; Caird, Sally and Roy, Robin (2001). An environmental assessment activity to promote active distance learning and challenge of personal lifestyles and values. In: 6th International auDES Conference: Bridging Minds and Markets. Emerging Issues in Environmental Education and Employment in Europe, 5-7 Apr 2001, Venice, Italy.

Cvejic, R.; Cook, M. and White, S. (2009). Implementation of the Water Framework Directive as a sociable process in spatial planning. In: 8th International Conference of the European Society of Ecological Economics, 29 Jun - 2 Jul 2009, Ljubljana, Slovenia.

Davies, Gareth; Hausel, Katalin and Stevens, James (2018). Community partners acting as insider researchers to facilitate a Do-It-Yourself networking. In: British Autoethnography Association Conference 2018, 23 & 24 Jul 2018, Bristol, UK.

Delamore, P. and Eckert, C. M. (2010). Engineering fashion: killer heels. In: 11th National Conference on Rapid Design, Prototyping & Manufacturing (RDPM 2010), 11 Jun 2010, Lancaster, United Kingdom.

Dewberry, E.; Castán Broto, V.; Glendinning, S; Walsh, C. L. and Powell, M. (2013). Looking Through the Lens of Shock: Exploring Opportunities for Learning and Innovation for Adaptable Infrastructure. In: Sustainable Innovation 2013 8th International Conference, 4-5 Nov 2013, Epsom, UK.

Dewberry, E. L.; Saca, L.; Moreno, M.; Sheldrick, L.; Sinclair, M.; Makatsoris, C. and Charter, M. (2016). A landscape of repair. In: Proceedings of the Sustainable Innovation 2016. Circular Economy Innovation and Design., Towards Sustainable Product Design, The Centre for Sustainable Design, University of the Creative Arts, Epsom, Surrey, UK, pp. 76–85.

Dewberry, E. L.; Sheldrick, L.; Moreno, M.; Sinclair, M. and Makatsoris, C. (2017). Developing Scenarios for Product Longevity and Sufficiency. In: PLATE: Product Lifetimes And The Environment, Research in Design Series, pp. 108–113.

Dewberry, Emma (2011). Developing an ecology of mind in design. In: 18th International Conference on Engineering Design (ICED 11), 15-18 Aug 2011, Copenhagen, Denmark.

Dewberry, Emma (2008). Can we design sustainable habits of mind? In: Introducing the Affective in Sustainable Design, 08 Jul 2008, Central St Martins College, University of the Arts London.

Dewberry, Emma (2002). Seeing sustainable futures: the potential of design education. In: The Design History Society Situated Knowledges Conference, 3-5 Sep 2002, Aberystwyth.

Dewberry, Emma (2000). Crime reduction through design: insights from ecodesign. In: The British Criminology Conference, 5-7 Jul 2000, Leicester University, Leicester.

Dewberry, Emma (2000). Exploring Ecodesign: changing perceptions of design and development. In: The Ninth Annual Business Strategy and the Environment Conference, 18-19 Sep 2000, Devonshire Hall, University of Leeds.

Dewberry, Emma (2018). Eco-literacy in Transition: the role of design ecologies in developing our capacity for radical change. In: Can Design Catalyse the Great Transition? Papers from the Transition Design Symposium 2016 (Kossoff, Gideon and Potts, Ruth eds.), The School of Design at Carnegie Mellon University, Schumacher College and the New Weather Institute. pp. 127–136.

Dewberry, Emma and De Barros, M. Monteiro (2006). Exploring the Need For Different Dialogues In Design. In: WonderGround - 2006 Design Research Society 3rd International Conference, 1-4 Nov 2006, Sociedade de Geografia de Lisboa, Lisbon, Portugal.

Dewberry, Emma and De Barros, M. Monteiro (2006). Dialogues on Design for Sustainability: Animating different strategies and outputs. In: 11th International Conference - Sustainable Innovation 06: Global challenges, issues and solutions, 23-24 Oct 2006, Chicago, USA.

Dewberry, Emma and Fletcher, Kate (2001). demi: linking design with sustainability. In: The 7th European Roundtable on Cleaner Production, IIIEE, 2-4 May 2001, Lund, Sweden.

Dewberry, Emma and Goggin, Phillip (1995). EcoDesign and beyond: steps towards sustainability. In: 1st International Conference of the European Academy of Design, 11-13 Apr 1995, Salford University.

Dewberry, Emma and Johnson, Jeffrey (2010). Design interventions, prediction and science in the sustainable transition of large, complex systems,. In: The 2nd International Conference on Design Engineering and Science (ICDES2010), 17-19 Nov, Tokyo.

Dewberry, Emma and Monterio de Barros, Margarida (2010). The fundamental role of ecological intelligence in creating resilient business practice. In: ‘Changing Times, New Challenges’: A Social Marketing and Socially Responsible Management Conference, 3 Nov 2010, Walton Hall, Milton Keynes, UK.

Earl, C.; Eckert, C.; Bucciarelli, L.; Whitney, D.; Knight, T.; Stacey, M.; Blackwell, A.; Macmillan, S. and Clarkson, P. J. (2005). Comparative study of design: application to Engineering Design. In: 15th International Conference in Engineering Design, ICED 2005, 15-18 Aug, Melbourne, Australia.

Earl, C.; Eckert, C. and Johnson, J. (2004). Complexity models in design. In: Design 2004 (Proceedings of the 8th International Design Conference) (Marjanovic, D. ed.), Faculty of Mechanical Engineering and Naval Architecture, Zagreb, Zagreb, Croatia, pp. 163–168.

Earl, C. F.; Eckert, C. M. and Johnson, J. (2001). Complexity in planning design processes. In: Proceedings of the 13th International Conference on Engineering Design: Design Research – Theories, Methodologies and Product Modelling (ICED'01), 21-23 Aug 2001, Glasgow, UK, pp. 149–156.

Eckert, C. M.; Alink, T. and Albers, A. (2010). Issue driven analysis of an existing product at different levels of abstraction. In: the 11th International Design Conference DESIGN 2010, 17-20 May 2010, Cavtat-Dubrovnik, Croatia.

Eckert, C. M.; Delamore, P. and Bell, C. (2010). Dialogue across design domains: rapid prototyping in aerospace and fashion. In: the 11th International Design Conference DESIGN 2010, 17-20 May 2010, Cavtat-Dubrovnik, Croatia.

Eckert, C. M.; Jowers, I. and Clarkson, P. J. (2007). Knowledge requirements over long product lifecycles. In: Proceedings of the 16th International Conference on Engineering Design (ICED'07), 28-31 Aug 2007, Paris, France.

Eckert, Claudia; Albers, Albert; Bursac, Nikola; Chen, Hilario Xin; Clarkson, John; Gericke, Kilian; Gladysz, Bartosz; Maier, Jakob; Rachenkova, Galina; Shapiro, Daniel and Wynn, David (2015). Integrated product and process models: towards an integrated framework and review. In: 20th International Conference on Engineering Design (ICED 2015), 27-30 Jul 2015, Milan.

Eckert, Claudia; Earl, Christopher; Lebjioui, Safaa and Isaksson, Ola (2013). Components margins through the product lifecycle. In: Product Lifecycle Management for Society, IFIP Advances in Information and Communication Technology, Springer, pp. 39–47.

Eckert, Claudia; Earl, Christopher; Stacey, Martin; Bucciarelli, Louis L. and Clarkson, P. John (2005). Risk across design domains. In: 15th International Conference on Engineering Design (ICED05), 15-18 Aug 2005, Melbourne, Australia.

Eckert, Claudia; Isaksson, Ola and Earl, Christopher (2014). Design margins as a key to understanding design iteration. In: 2nd Biennial International Conference on Dynamics for Design; 26th International Conference on Design Theory and Methodology (IDETC/CIE 2014), 17-20 Aug 2014, Buffalo, New York, USA, ASME.

Eckert, Claudia; Wynn, David and Clarkson, John (2009). Design customisation in multi-project environments: using process simulation to explore the issues. In: 8th International Symposium on Tools and Methods of Competitive Engineering (TMCE 2010), 12-16 Apr 2010, Ancona, Italy.

Garthwaite, Pam and Eckert, Claudia (2012). Glitches, snags and crises: a study of change in hospital adaptation projects. In: 28th Annual ARCOM Conference, 3-5 Sep 2012, Edinburgh.

Gasparin, C. P.; Angus, A.; Cook, M.; Peets, A.; Blackburn, D. and Godwin, R. (2008). Measuring farmers’ preference for systems that improve agrochemical traceability. In: 9th Conference on Precision Agriculture, 20-23 Jul 2008.

Gaved, Mark; Jowers, Iestyn; Dallison, Delphine; Elliott-Cirigottis, Gary; Rochead, Alan and Craig, Mark (2016). Online distributed prototyping through a university-makerspace collaboration. In: FabLearn Europe 2016, 19-20 Jun 2016, Preston, Lancashire, UK.

Gericke, K.; Eckert, C.M. and Wynn, D. (2016). Towards a Framework of Choices Made During the Lifecycles of Process Models. In: DS84: Proceedings of the DESIGN 2016 14th International Design Conference, pp. 1275–1284.

Gericke, Kilian and Eckert, Claudia (2015). The long road to improvement in modelling & managing engineering processes (MMEP). In: Proceedings of the 20th International Conference on Engineering Design (ICED15).

Gerlinghaus, Fabian; Pierce, Brennand; Metzler, Torsten; Jowers, Iestyn; Shea, Kristina and Cheng, Gordon (2012). Design and emotional expressiveness of Gertie (an open hardware robotic desk lamp). In: 2012 IEEE RO-MAN: The 21st IEEE International Symposium on Robot and Human Interactive Communication, 9-13 Sep 2012, Paris, France, pp. 1129–1134.

Gerrike, Kilian; Eckert, Claudia and Stacey, Martin (2017). What do we need to say about a design method? In: 21th International Conference on Engineering Design (ICED 2015), 21-25 Aug 2017, Vancouver, Canada.

Gottberg, A.; Cook, M.; Morris, J.; Angus, A. and Longhurst, P. (2006). Satisfying household demand using services instead of material products to achieve household waste prevention. In: Waste 2006: Sustainable Waste and Resource Management, 19-21 Sep 2006, Warwick, UK.

Greene, Catherine; Alevizou, Giota; Ramster, Gail; Alexiou, Katerina; Zamenopoulos, Theo; Outten, Alan and Corzannelli, Cristina (2013). Creative communities, creative assets: exploring methods of mapping community assets. In: Nordes2013: Experiments in Design Research: Expressions, Knowledge, Critique, 9-12 Jun 2013, Copenhagen, Denmark/Malmö, Sweden.

Harding, John Edwin (2013). Experiencing mobility in underground transport systems. In: Proceedings LTA-UITP Singapore International Transport Congress and Exhibition (SITCE) 2013.

Harding, John Edwin; Luck, Rachael and Dalton, Nicholas (2016). Journeys in the City: Empathising With the Users of Transport Buildings. In: Proceedings of the ID@50 Integrated Design Conference 2016 (Emmitt, Stephen and Adeyeye, Kemi eds.), University of Bath, Bath, pp. 324–335.

Harrison, Laura; Jowers, Iestyn and Earl, Christopher (2019). Defining Rules for Kinematic Shapes with Variable Spatial Relations. In: Computer-Aided Architectural Design. "Hello, Culture" (Lee, Ji-Hyun ed.), Communications in Computer and Information Science, Springer, Singapore, pp. 444–458.

Hetherington, Robina; Laney, Robin and Peake, Stephen (2010). Zero and low carbon buildings: A driver for change in working practices and the use of computer modelling and visualization. In: 14th International Conference on Information Visualisation, 27-29 Jul 2010, London South Bank University, London, UK.

Hetherington, Robina; Laney, Robin and Peake, Stephen (2012). Zone modelling and visualisation: keys to the design of low carbon buildings. In: 16th International Conference on Information Visualisation (IV), 11-13 Jul 2012, Montpellier, France.

Hetherington, Robina; Laney, Robin and Peake, Stephen (2011). A software vision to enable the holistic design of low carbon buildings. In: 3rd International Workshop on Software Research and Climate Change at European Conference on Object-Oriented Programming (ECOOP) 2011, 25 Jul 2011, Lancaster, UK.

Hodgson, Paul; Potter, Stephen; Warren, James and Gillingwater, David (2011). Can bus really be the new tram? In: Thredbo 12: The 12th International Conference on Competition and Ownership in Land Passenger Transport, 11-15 Sep 2011, Durban, South Africa.

Holden, G. (2009). Design at a distance. In: Engineering and Product Design Education Conference, 10-11 Sep 2009, Brighton, UK.

Holden, Georgina; Schadewitz, Nicole and Zamenopoulos, Theodore (2009). Design education, design research. In: Designs on Elearning, 02-04 Sep 2009, Online.

Ieromonachou, Petros; Potter, Stephen and Warren, James (2005). Comparing Urban Road Pricing Implementation and Management Strategies from the UK and Norway. In: PIARC Seminar on Road Pricing with emphasis on Financing, Regulation and Equity, 11-13 Apr 2005, Cancun, Mexico.

Ieromonachou, Petros and Warren, James (2010). Flows, accommodation and revenue: an analysis of tourism trends in Cyprus. In: International Conference on Sustainable Tourism: Issues, Debates and Challenges, 21-25 Apr 2010, Crete & Santorini, Greece.

Iravani, Pejman; Johnson, Jeff H. and Rapanotti, Lucia (2005). Robotics and the Q-analysis of behaviour. In: Proceedings of the 10th International Symposium on Artificial Life and Robotics (AROB), 4-6 Feb 2005, Beneppu, Japan.

Isaksson, Ola; Eckert, Claudia; Panarotto, Massimo and Malmqvist, Johan (2020). You Need To Focus To Validate. In: Proceedings of the Design Society: DESIGN Conference, Cambridge University Press, Cambridge, 1 pp. 31–40.

Ismail, Nashwa and Chansawang, Rochaporn (2018). Promoting agritourism through connecting young farmers using mobile technology in Thailand. In: 2018 Newton Inclusive Innovation for Enhanced Local Experience in Tourism, 28-31 Aug 2018, Phukt, Thailand.

Ismail, Nashwa and Mathew, Tyler-Jones (2018). Games-Based Online Course Design: Prototype of Gamification for Online Tutors. In: 12th European Conference on Games Based Learning (ECGBL18), 4-5 Oct 2018, Sophia Antipolis, France.

Jimenez-Romero, Cristian; Johnson, Jeffrey and De Castro, Ricardo (2013). Machine and social intelligent peer-assessment systems for assessing large student populations in massive open online education. In: Proceedings of the 12th European Conference on e-Learning, SKEMA Business School, Sophia Antipolis, France, 30-31 October 2013. Volume 1, Academic Conferences and Publishing International Limited, pp. 598–607.

Johnson, Jeff and Hirst, Tony (2005). Robots, art and complexity science. In: Complexity Symposium: Art, Complexity and Technology: Their Interaction in Emergence, 5-6 May 2005, Torino, Italy.

Johnson, Jeffrey (2009). Hypernetworks of complex systems. In: Complex Sciences. First International Conference, Complex 2009, Shanghai, China, February 2009. Revised Papers, Part 1, 23-25 Feb 2009, Shanghai, Springer, pp. 364–375.

Johnson, Jeffrey (2012). Hypernetworks for policy design in systems of systems of systems. In: 2nd International Conference on Complex Sciences: Theory and Applications, 5-7 Dec 2012, Santa Fe, Springer-Verlag, pp. 179–189.

Johnson, Jeffrey (2009). Policy, design and management: the in-vivo laboratory for the science of complex socio-technical systems. In: Complex Sciences: First International Conference, Complex 2009, Shanghai, China, February 23-25, 2009. Revised Papers, Part 1, Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering, Springer, pp. 232–241.

Johnson, Jeffrey (2006). Hypernetworks for reconstructing the dynamics of multilevel systems. In: European Conference on Complex Systems 2006, 25-29 Sep 2006, Oxford.

Johnson, Jeffrey; Denning, Peter; Sousa-Rodrigues, David and Delic, Kemal A. (2017). Big Data, Digitization, and Social Change (Ubiquity Symposium). In: Ubiquity, ACM, 2017, article no. 1.

Johnson, Jeffrey and Price, Blaine (2003). Representing Patterns of autonomous agent dynamics in multi-robot systems. In: International Journal of Human-Computer Studies, 63(1-2) pp. 228–253.

Johnson, Jeffrey and Rossi, Ruggero (2018). Dynamic Structures for Evolving Tactics and Strategies in Team Robotics. In: Proceedings of the Conference on Artificial Life and Robotics (ICAROB2018) (Jia, Yingmin; Ito, Takao and Lee, Ju-Jang eds.), ALife Robotics Corp. Ltd., Beppu, Oita, JAPAN, pp. 126–131.

Johnson, Jeffrey and Serras, Joan (2008). The multilevel dynamics of very large complex road systems. In: Euproean Conference on Complex Systems (ECCS' 08), 14-19 Sep 2008, Jerusalem.

Jones, D.A. and Eckert, C.M. (2016). Design Margins: Impact on Building Energy Performance. In: DS84: Proceedings of the DESIGN 2016 14th International Design Conference, pp. 1295–1304.

Jones, Darren and Eckert, Claudia (2017). Overdesign in building services: the hidden energy use. In: 21st International Conference on Engineering Design, 21-25 Aug 2017, Vancouver, Canada.

Jones, Darren Anthony; Eckert, Claudia and Garthwaite, Pam (2020). Managing Margins: Overdesign In Hospital Building Services. In: Proceedings of the Design Society: DESIGN Conference, Cambridge University Press, Cambridge, pp. 215–224.

Jones, Derek (2017). Narrative Realities and Optimal Entropy. In: Proceedings, MDPI AG, Basel, Switzerland, 1(3), article no. 51.

Jones, Derek (2011). An alternative (to) reality. In: Proceedings of the Researching Learning in Immersive Virtual Environments Conference, 21-22 Sep 2011, The Open University, Milton Keynes.

Jones, Derek (2015). Reflection-in-action and motivated reasoning. In: Proceedings of the 3rd International Conference for Design Education Researchers (VandeZande, Robin; Bohemia, Erik and Digranes, Ingvild eds.), Aalto University, pp. 1599–1615.

Jones, Derek and Dewberry, Emma (2012). Building Information Modelling design ecologies - a new model? In: First UK Academic conference on BIM: Conference Proceedings, 5-9 Sep 2012, Northumbria University.

Jones, Derek and Lloyd, Peter (2013). Which way is up? Space and place in virtual learning environments for design. In: 2nd International Conference for Design Education Researchers, 14-17 May 2013, Oslo, pp. 552–563.

Jones, Derek; Lotz, Nicole and Holden, Georgina (2017). Lurking and learning: Making learning visible in a Virtual Design Studio. In: Proceedings of the LearnX Design London 2017 Conference (Pritchard, Gary and Lambert, Nick eds.), London, pp. 176–183.

Jones, Derek; Plowright, Philip; Bachman, Leonard and Poldma, Tiiu (2016). Introduction: Design Epistemology. In: DRS2016 Proceedings (Lloyd, Peter and Bohemia, Erik eds.), Design Research Society, London, 1 pp. 295–302.

Jowers, I.; Prats, M.; Lim, S.; Mckay, A.; Garner, S. and Chase, S. (2008). Supporting reinterpretation in computer-aided conceptual design. In: Fifth Eurographics Workshop on Sketch-Based Interfaces and Modeling, 11-13 Jun 2008, Annecy, France, pp. 151–158.

Jowers, Iestyn and Earl, Chris (2012). Shape interpretation with design computing. In: Fifth International Conference on Design Computing and Cognition (DDC'12): Bringing Artificial Intelligence, Cognitive Science and Computational Theories to Design Research, 7-9 Jun 2012, Bryan, TX, USA.

Jowers, Iestyn and Earl, Christopher (2017). Structures in shapes: a perspective from rules and embedding. In: Cultural DNA Workshop 2017, 13 Jan 2017, KAIST Graduate School of Culture Technology.

Jowers, Iestyn and Earl, Christopher (2017). Incommensurable design descriptions. In: Creative Design and Advanced Manufacturing: An emerging application area for Signals and Systems, 2 Sep 2017, 2017 25th European Signal Processing Conference (EUSIPCO), Kos, Greece.

Jowers, Iestyn; Gaved, Mark; Elliott-Cirigottis, Gary; Dallison, Delphine; Rochead, Alan and Craig, Mark (2016). Communication is not collaboration: observations from a case study in collaborative learning. In: Proceedings of DRS 2016, Design Research Society 50th Anniversary Conference (Lloyd, Peter and Bohemia, Erik eds.), Brighton, UK, pp. 609–624.

Jowers, Iestyn; Prats, Miquel; Earl, Christopher and Garner, Steven (2004). On curves and computation with shapes. In: Generative CAD Systems (Akin, Omer; Krishnamurti, Ramesh and Lam, Khee Poh eds.), Carnegie Mellon University, Pittsburgh, Pennsylvania, pp. 439–457.

Jowers, Iestyn; Prats, Miquel; McKay, Alison and Garner, Steven (2011). Design exploration with useless rules and eye tracking. In: 18th International Conference on Engineering Design (ICED11), 15-18 Aug 2011, Copenhagen, Denmark.

Jowers, Iestyn; Prats, Miquel; Pedreira, Nieves; McKay, Alison and Garner, Steven (2011). Supporting shape reinterpretation with eye tracking. In: 'Circuit bending, breaking and mending', the 16th conference of Computer Aided Architectural Design Research in Asia (CAADRIA), 27-30 Apr 2011, Newcastle, Australia.

Khan, Usman; Terchi, Abdelaziz; Lim, Sungwoo; Wright, David and Qin, Sheng Feng (2006). Neural network model optimisation for 3D freeform surfaces from sketched curves. In: 6th International Conference on Recent Advances in Soft Computing (RASC 2006), 10-12 Jul 2006, Canterbury.

Khan, Usman; Terchi, Abdelaziz; Lim, Sungwoo; Wright, David and Qin, Sheng-Feng (2006). 3D Freeform Surfaces from Planar Sketches using Neural Networks. In: Neural Information Processing, 13th International Conference, ICONIP 2006, Part II, 3-6 Oct 2006, Hong Kong, China, Springer Berlin / Heidelberg, pp. 651–660.

Kreitmayer, Stefan; Laney, Robin; Peake, Stephen and Rogers, Yvonne (2013). Sharing bubbles: reflections on offline multi-surface scenarios. In: SOFTec Workshop, UbiComp '13 Adjunct Proceedings, 8 Sep 2013, Zurich, Switzerland, ACM, pp. 1405–1408.

Kreitmayer, Stefan; Rogers, Yvonne; Laney, Robin and Peake, Stephen (2012). From participatory to contributory simulations: changing the game in the classroom. In: Conference on Human Factors in Computing Systems, 05-10 May 2012, Austin, Texas, USA, pp. 49–58.

Kreitmayer, Stefan; Rogers, Yvonne; Laney, Robin and Peake, Stephen (2013). UniPad: orchestrating collaborative activities through shared tablets and an integrated wall display. In: Ubicomp '13: 2013 ACM International Joint Conference on Pervasive and Ubiquitous Computing, 8-12 Sep 2013, Zurich, Switzerland, ACM, pp. 801–810.

Lane, Ben; Potter, Stephen and Warren, James (2006). Taxing Cars With Attitude. In: Low CVP Low Carbon Road Transport Challenge, Low Carbon Vehicle Partnership (Low CVP) Annual Conference 2006, Low Carbon Vehicle Partnership, Harps Ltd, Essex, UK, pp. 41–47.

Langendahl, Per-Anders; Cook, Matthew and Potter, Stephen (2010). Analysing the eco-innovation process in a UK food processing firm. In: 15th International Conference Sustainable Innovation 2010, 8-9 Nov 2010, Rotterdam, Netherlands.

Lebjioui, S.; Eckert, C. M. and Earl, C. (2016). Understanding the relationship between design margins and trade-offs. In: Proceedings of the DESIGN 2016 14th International Design Conference (Marjanović, D.; Štorga, M.; Pavković, N.; Bojčetić, N. and Škec, S. eds.), pp. 1515–1522.

Lloyd, Peter and Jones, Derek (2013). Normal creativity : What 1,038 t‐shirts can tell you about design education. In: 2nd International Conference for Design Education Researchers, 14-17 May 2013, Oslo, pp. 307–321.

Lloyd, Peter; McDonnell, Janet and Cross, Nigel (2007). Analysing design behaviour: The design thinking research symposia series. In: Proceedings of 2nd International Association of Design Research Societies (IASDR) Conference, 12-15 Nov 2007, Hong Kong.

Lotz, Nicole; Jones, Derek and Holden, Georgina (2019). OpenDesignStudio: virtual studio development over a decade. In: Proceedings of the DRS LearnXdesign Conference 2019, 9-12 Jul 2019, Ankara.

Lotz, Nicole; Jones, Derek and Holden, Georgina (2015). Social engagement in online design pedagogies. In: Proceedings of the 3rd International Conference for Design Education Researchers (Vande Zande, Robin; Bohemia, Erik and Digranes, Ingvild eds.), Aalto University, pp. 1645–1668.

Lotz, Nicole; Sharp, Helen; Woodroffe, Mark; Blyth, Richard; Rajah, Dino and Ranganai, Turugare (2014). Framing behaviours in novice interaction designers. In: Proceedings of DRS 2014: Design's Big Debates, Umeå Institute of Design, Umeå University, pp. 1178–1190.

Lotz, Nicole; Sharp, Helen; Woodroffe, Mark; Richard, Blyth; Rajah, Dino and Ranganai, Turugare (2013). Co-evolving problems and solutions: The case of novice interaction designers in Botswana and the UK. In: IASDR, 26-30 Aug, Tokyo, Japan, International Association of Societies of Design Research, pp. 1004–1015.

Lotz, Nicole; Thomas, Briony; Fernández Cárdenas, Juan Manuel; Reynaga Peña, Cristina; Díaz de León Lastras, Alejandra; Cortes Capetillo, Azael; González Nieto, Noe; Santamaría-Cid de León, David; López, Fabio; Machado, Rafa and Hayhoe, Simon (2019). Co-creating FabLab La Campana: Empowering a marginalised community in the North of Mexico. In: IASDR 2019 The International Association of Societies of Design Research (Evans, Martyn; Saw, Annie; Cooper, Rachel and Hoo Na, Jea eds.), 2-5 Sep 2019, Manchester.

Luck, Rachael (2014). What is it about space that is important in interaction? In: CHI 2014, 26 Apr - 1 May 2014, Toronto, Canada.

Luck, Rachael and Hamnett, Katharine (2020). Design activism in a pandemic, towards a life otherwise. In: Participation(s) otherwise: 16PDC Participatory Design Conference, 15 Jun 2020, Universidad de Caldas, Manizales, Colombia, [on-line].

Maclachlan, Lynne and Jowers, Iestyn (2014). Formalising flexible multi-material surfaces as weighted shapes. In: SIGGRAPH Asia 2014 Creative Shape Modeling and Design, ACM, article no. 3.

Maier, A.M.; Eckert, C.M. and Clarkson, P.J. (2009). Towards managing team-interfaces: an exploratory elicitation of factors influencing communication. In: 17th International Conference on Engineering Design (ICED'09), 2009, Stanford, CA.

Maier, J. F.; Eckert, C. M. and Clarkson, P. J. (2016). Model granularity and related concepts. In: Proceedings of the DESIGN 2016 14th International Design Conference (Marjanović, D.; Štorga, M.; Pavković, N.; Bojčetić, N. and Škec, S. eds.), pp. 1327–1336.

Maier, Jakob; Eckert, Claudia and Clarkson, John (2015). Different levels of product model granularity in design process simulation. In: 20th International Conference on Engineering Design (ICED 2015), 27-30 Jul 2015, Milan.

Masko, Mary Lou; Eckert, Claudia M.; Caldwell, Nicholas H. M. and Clarkson, P. John (2011). Designing for resilience: using a Delpi Study to indentify resilience issues for hospital design in a changing climate. In: 18th International conference on engineering design (ICED 11), 15-18 Aug 2011, Copenhagen, Demark.

McGilp, H.; Eckert, C. and Earl, C. (2016). Don’t Look Back: The Paradoxical Role of Recording in the Fashion Design Process. In: Proceedings of DRS2016: Design + Research + Society - Future-Focused Thinking (Lloyd, P. and Bohemia, E. eds.), Design Research Society, London, pp. 2521–2534.

Moncaster, Alice; Cheng, Vicky; Littlewood, E and Muscat, Daniela (2012). Designing climate resilient schools: a case study of St Faith’s School, Cambridge. In: Proceedings of 1st international conference on urban sustainability and resilience, 05-06 Nov 2012, University College London.

Moullec, Marie-Lise; Jankovic, Marija and Eckert, Claudia (2015). The impact of criteria in system architecture selection: observation from industrial experiment. In: 20th International Conference on Engineering Design (ICED 2015), 27-30 Jul 2015, Milan.

Oliver, N.; Dewberry, E. and Dostaler, I. (1999). New Product Performance and Practice: An international benchmarking study in the consumer electronics industry. In: EIASM 6th International Product Development Conference, 8 Jul 2008, Cambridge.

Oliver, N.; Dewberry, E.; Nilson, P. and Shamir, T. (1998). Product Development Processes in Companies with Class-Leading Products. In: 5th International Product Development Management Conference, 25-26 May 1998, Como, Italy.

Paterson, Gareth and Earl, Chris (2011). Line and plane to solid: analyzing their use in design practice through shape rules. In: International Conference on Design Computing and Cognition, 10-14 Jul 2010, Stuttgart, pp. 251–267.

Pearson, Richard J.; Bluck, Michael J. and Murphy, Samuel T. (2017). A Symbiotic Approach to Compact Fission and Fusion Reactors. In: ANS Transactions, American Nuclear Society, 117(1) pp. 378–381.

Peter, Andreas; Lotz, Nicole; McDonnell, Janet and Lloyd, Peter (2013). The effect of prototyping material on verbal and non-verbal behaviours in collaborative design tasks. In: 5th International Congress of International Association of Societies of Design Research (IASDR), 26-30 Aug 2013, Tokyo, Japan, IASDR, pp. 2382–2393.

Peter, Andreas; Schadewitz, Nicole and Lloyd, Peter (2011). Talk around things: prototyping and discussion in the design process. In: 4th World Conference on Design Research (IASDR2011), 31 Oct - 4 Nov 2011, Delft, The Netherlands.

Potter, Stephen; Roby, Helen; Cook, Matthew and Langendahl, Per-Anders (2011). Transport and environmental innovation. In: Sustainable Innovation 11 'State of the Art in Sustainable Innovation and Design', 24-25 Oct 2011, Farnham, Surrey.

Prats, Miquel; Garner, Steve; Jowers, Iestyn; McKay, Alison and Pedreira, Nieves (2010). Interpretation of geometric shapes – an eye movement study. In: Proceedings of the 2010 Symposium on Eye-Tracking Research & Applications, ACM, pp. 243–250.

Prats, Miquel; Lim, Sungwoo and Jowers, Iestyn (2008). Describing shape transformations in design sketches. In: Design Computing and Cognition DCC’08 workshop on Informing computational support for conceptual design: lessons learned from sketching studies, 21 Jun 2008, Georgia Institute of Technology, Atlanta, GA, pp. 5–8.

Rapanta, Chrysi; Schadewitz, Nicole and Holden, Georgina (2010). Design and communication patterns observed in an eLearning design team: A case-study. In: World Conference on Educational Multimedia, Hypermedia and Telecommunications (Ed-Media 2010), 29 Jun 2010, Toronto, Canada, pp. 356–365.

Rasoulifar, Rahi; Zolghadri, Marc and Eckert, Claudia (2010). The need for a tool to exchange information in non-hierarchical network of the electrtonic Industry: an european project. In: Design 2010, 17-20 May 2010, Dubrovnik, Croatia.

Renedo Illarregi, Erika (2020). GAME: playing a boardgame co-designed with a group of people with psychosis. In: PDC '20: Proceedings of the 16th Participatory Design Conference 2020, 3 pp. 203–206.

Renedo Illarregi, Erika (2018). What are the effects of co-designing on participants’ mental health and does uncertainty play a role in this change process? In: Proceedings of the 5th International Conference on Design4Health (Christer, Kirsty; Craig, Claire and Wolstenholme, Dan eds.), Sheffield Hallam University, Sheffield, UK, 2 pp. 195–202.

Renedo Illarregi, Erika; Alexiou, Katerina and Zamenopoulos, Theodore (2019). Why designing may help treat psychosis. In: International Association of Societies of Design Research Conference 2019 Proceedings.

Renedo Illarregi, Erika; Alexiou, Katerina and Zamenopoulos, Theodore (2020). Co-design for wellbeing with mental health participants: from identifying a problem to creating prototypes. In: Proceedings of the 6th International Conference on Design4Health, Amsterdam, 2020. (Christer, Kirsty; Craig, Claire and Chamberlain, Paul eds.), Sheffield Hallam University, Sheffield, UK, 2 pp. 23–30.

Reynolds, Martin (2018). Making policy and making policy work with developmental evaluation. In: Centre for the evaluation of complexity across the nexus (CECAN) webinar series, 24 Jul 2018, Centre for the evaluation of complexity across the nexus (CECAN).

Reynolds, Martin Systems Thinking for Assessments: beyond ‘getting the bigger picture. In: European Environment Agency (EEA) Academy Winter School 2019, 28 Jan - 1 Feb 2019, Copenhagen.

Reynolds, Martin; Ison, Raymond; Shah, Rupesh and Wilding, Helen (2020). Beyond employability: a more radical role for Higher Education in developing workplace capabilities. In: Employability Conference 2020 Expanding the narrative for a rapidly changing world, 11 Mar 2020, Walton Hall, Milton Keynes.

Riedel,, Johann; Roy, Robin and Potter, Stephen (2008). Design and market position - mapping the market with the MADRID market map. In: International Product Development Management Conference, 30 Jun - 1 Jul 2008, Hamburg, Germany.

Roberts, Joi L.; Schadewitz, Nicole and Adler, Pedro Jorge (2008). STAR framework revisited: Curriculum for user-centered design summer schools. In: Proceedings of Connected 2007, International Conference on Design Education, 9-12 Jul 2007, University of New South Wales, Sydney, Australia.

Roy, Robin (2016). Consumer Product Design and Innovation: Past, present and future. In: Proceedings of DRS 2016, Design Research Society 50th Anniversary Conference (Lloyd, Peter and Bohemia, Erik eds.), Design Research Society, London, UK, 10 pp. 3755–3770.

Roy, Robin and Caird, Sally (2006). Designing low and zero carbon products and systems – adoption, effective use and innovation. In: Sustainable Innovation 06: 11th International Conference, 23-24 Oct 2006, Chicago, USA.

Roy, Robin and Caird, Sally (2007). Designing low and zero carbon products and systems: improvements based on consumers’ experience of adoption and use. In: International Conference on Engineering Design ICED'07, Design for Society: Knowledge, innovation and sustainability, 28-30 Aug 2007, Paris, France.

Roy, Robin and Warren, James (2018). Card-based Tools For Creative And Systematic Design. In: Proceedings of the Design Research Society DRS2018 conference (TBC), pp. 1075–1087.

Schadewitz, Nicole (2005). Interaction and Interface Design Patterns for Intercultural Collaboration. In: Proceedings of the 7th International Workshop on Internationalisation of Products and Systems (IWIPS '05), 7-9 Jul 2005, Amsterdam, Netherlands.

Schadewitz, Nicole (2005). Interface and Interaction Design Patterns for Intercultural Collaboration. In: Proceedings of the Seventh International Workshop on Internationalisation of Products and Systems, 7-9 Jul 2005, Amsterdam.

Schadewitz, Nicole; Adler, Pedro-Jorge; Moncur, Wendy and Roberts, Joi (2006). The STAR Interaction Design Summer Schools Framework. In: Proceedings of WONDERGROUND, International Deign Research Conference, 1-3 Nov 2006, Lisbon, Portugal.

Schadewitz, Nicole; Garner, Steve and Ferreira, Giselle (2008). Utilizing FM software in collaborative design-learning. In: HCI 2008 Workshop 'HCI for Technology-Enhanced Learning', 15 Sep 2008, Liverpool.

Schadewitz, Nicole and Jachna, Timothy (2007). Comparing inductive and deductive methodologies for design patterns identification and articulation. In: International Design Research Conference IADSR 2007 Emerging Trends in Design Research, 12-15 Nov 2007, Hong Kong.

Schadewitz, Nicole and Jachna, Timothy (2007). Introducing New Methodologies for Identifying Design Patterns for Internationalization and Localization. In: International Conference on Human-Computer Interaction (HCII), 22-27 Jul 2007, Beijing, China.

Schadewitz, Nicole and Jachna, Timothy (2006). Comparing design summer schools in European and Asian contexts. In: Proceedings of the International Design Research Symposium, IDRS, 10-12 Nov 2006, Seoul, Korea.

Schadewitz, Nicole and Zakaria, Norhayati (2009). Cross-cultural collaboration Wiki: evolving knowledge about international teamwork. In: 2009 International Workshop on Intercultural Collaboration (IWIC '09), 20-21 Feb 2009, Palo Alto, CA, USA.

Schadewitz, Nicole and Zamenopoulos, Theodore (2009). Towards an online design studio: a study of social networking in design distance learning. In: International Association of Societies of Design Research (IASDR) Conference 2009, 18-22 Oct 2009, Seoul, South Korea.

Subrahmanian, Eswaran; Eckert, Claudia; McMahon, Christopher and Reich, Yoram (2017). Economic development as design: Insight and guidance through the PSI framework. In: 21sr International Conference on Engineering Design (ICED 2015), 21-25 Aug 2017, Vancouver.

Teixeira de Sampayo, Mafalda; Sousa-Rodrigues, David; Jimenez-Romero, Cristian and Johnson, Jeffrey (2014). Peer assessment in architecture education. In: 14th International Conference on Technology, Policy and Innovation, 9-12 Sep 2014, Brno, Czech Republic.

Warren, J. P.; Potter, S. and Parkhurst, G. (2005). Implications of HGV charging for the UK. In: 37th Annual Conference of Universities Transport Study Group, 5-7 Jan 2005, Bristol, UK.

Warren, James and Avila, Jordi Mirabent (2010). Modelling urban bus transport emissions in Santiago de Cuba. In: 6th Cuban Congress on Mechanical Engineering (CCIM2010), 29 Nov - 03 Dec 2010, Palacio de Convenciones, de La Habana.

Warren, James P. and Gaskell, Anne F. (2002). Tutors as learners: overcoming barriers to learning ICT skills. In: The European Conference on Educational Research, ECER 2002, 11-14 Sep 2002, Libson, Portugal.

Zapico, Miguel; Eckert, Claudia; Jowers, Iestyn and Earl, Christopher (2015). Towards product platform introduction: optimising commonality of components. In: Proceedings of the 20th International Conference on Engineering Design (ICED15).

Zhou, W.; O’Neill, E.; Moncaster, Alice; Reiner, D. and Guthrie, P. Applying Bayesian model averaging to characterise urban residential stock turnover dynamics. In: Applied Energy Symposium 2019: Low Carbon Cities and Urban Energy Systems, 16-18 Oct 2019, Xiamen, China.

Zolghadri, Marc; Eckert, Claudia and Rasoulifar, Rahi (2010). Modelling decision and data dependencies in engineer-to-order project management. In: 12th International DSM Conference 2010, 22-23 Jul 2010, Cambridge.

ThesisTo Top

Dewberry, Emma (1996). Ecodesign. PhD thesis The Open University.

PatentTo Top

Allansson, Ronny; Andreasson, Anders Klas; Chandler, Guy Richard and Warren, James Patrick (2001). Device and method for removing sooty particulate from exhaust gases from combustion processes. Johnson Matthey Public Limited Company, WO/2001/004466A1.

OtherTo Top

Angus, Andrew; Gottberg, Annika; Cook, Matthew and Morris, Joe (2008). Achieving Household Waste Prevention Through Product Service Systems, Technical Report 4: Social and Economic Assessment. Department for Environment, Food and Rural Affairs.

Caird, Sally and Hallett, S. (2005). Postcards from the Future. OPEN2.net, Milton Keynes, UK.

Caird, Sally; Roy, Robin and Potter, Stephen (2010). Heat pump user experiences, behaviour and satisfaction. The Open University Design Innovation Group, Milton Keynes UK.

Cook, Matthew; Gottberg, Annika; Angus, Andrew; Longhurst, Philip and Morris, Joe (2008). Achieving Household Waste Prevention Through Product Service Systems. Department for Environment, Food and Rural Affairs.

Dewberry, Emma (2002). Packaging for Sustainability. Package Design, 4:113.

Dewberry, Emma (2000). Lessons from Ecodesign. Cambridge University.

Framework Convention on Climate Change (1999). Coastal Adaptation Technologies. United Nations, Bonn.

Gottberg, Annika; Cook, Matthew and Longhurst, Philip (2008). Achieving Household Waste Prevention Through Product Service Systems, Technical Report 7: Prospective Case Studies. Department for Environment, Food and Rural Affairs.

International Energy Agency; United Nations Energy Programme and Climate Technology Initiative (2001). Technology without borders: case studies of successful technology transfer. Organisation for Economic Cooperation and Development (OECD), Paris.

Makatsoris, H.; Moreno, M. A.; Sheldrick, L.; Dewberry, E. and Sinclair, M. (2017). Business as Unusual: Designing products with consumers in the loop. Cranfield University.

Nuttall, William J.; Samaras, Constantine and Bazilian, Morgan (2017). Energy and the Military: Convergence of Security, Economic, and Environmental Decision-Making. Energy Policy Research Group, Working Paper 1717, University of Cambridge.

Peake, Stephen (1995). Trans-European Networks in Context? Royal Institute of International Affairs, London.

Peake, Stephen (2002). Don's diary: Filming Shanghai boom. Times Higher Education (THE).

Peake, Stephen and Hope, Chris (1991). Transport policy analysis: an energy analogy. University of Cambridge, Management Studies Group, Cambridge.

Woodford, Philip and Peake, Stephen (2017). The Hero Who Overslept. Fringe Management Ltd, Edinburgh.

World Energy Council (1998). Global Transport and Energy Development: The Scope for Change. World Energy Council, London.

Zhou, Wei; Moncaster, Alice; Reiner, David M. and Guthrie, Peter (2019). Estimating Lifetimes and Stock Turnover Dynamics of Urban Residential Buildings in China. Energy Policy Research Group, University of Cambridge, Cambridge.

Zhou, Wei; O’Neill, Eoghan; Moncaster, Alice; Reiner, David M. and Guthrie, Peter (2019). Applying Bayesian Model Averaging to Characterise Urban Residential Stock Turnover Dynamics. Energy Policy Research Group, University of Cambridge, Cambridge.

Export

Subscribe to these results

get details to embed this page in another page Embed as feed [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0