Currently browsing: Items authored or edited by Richard Moat https://orcid.org/0000-0002-9445-8658

39 items in this list.
Generated on Wed Sep 30 21:32:14 2020 BST.

Jump to:

2020 | 2019 | 2018 | 2017 | 2016 | 2015 | 2014 | 2013 | 2012 | 2011 | 2010 | 2009 | 2008

2020To Top

2019To Top

2018To Top

Forsey, Alex; Das, Yadunandan; Simm, Thomas H.; Clark, Dan; Boswell, John; Gungor, Salih and Moat, Richard (2018). Mechanical Property Heterogeneity in Additively Manufactured Nickel Superalloy. Materials Science and Engineering A, 712 pp. 681–684.

Moat, R. J.; Ooi, S.; Shirzadi, A. A.; Dai, H.; Mark, A. F.; Bhadeshia, H. K. D. H. and Withers, P. J. (2018). Residual stress control of multipass welds using low transformation temperature fillers. Materials Science and Technology, 34(5) pp. 519–528.

2017To Top

2016To Top

Nneji, S. O.; Zhang, S. Y.; Kabra, S.; Moat, R. J. and James, J. A. (2016). Modelling and control of neutron and synchrotron beamline positioning systems. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 813 pp. 123–131.

2015To Top

Mamun, Abdullah; Moat, Richard James and Bouchard, P. John (2015). Origin and Effect of Back Stress on Cyclic Creep Deformation of 316H Stainless Steel. In: Volume 5: High-Pressure Technology; Rudy Scavuzzo Student Paper Competition and 23rd Annual Student Paper Competition; ASME NDE Division, V005T09A013.

2014To Top

Mark, A. F.; Moat, R.; Forsey, A.; Abdolvand, H. and Withers, P. J. (2014). A new method for quantifying anisotropic martensitic transformation strains accumulated during constrained cooling. Materials Science and Engineering: A, 611 pp. 354–361.

Ramjaun, T. I.; Stone, H. J.; Karlsson, L.; Gharghouri, M. A.; Dalaei, K.; Moat, R. J. and Bhadeshia, H. K. D. H. (2014). Surface residual stresses in multipass welds produced using low transformation temperature filler alloys. Science and Technology of Welding and Joining, 19(7) pp. 623–630.

Kato, Hiroyuki; Moat, Richard; Mori, Tsutomu; Sasaki, Kazuaki and Withers, Philip (2014). Back stress work hardening confirmed by Bauschinger effect in a TRIP steel using bending tests. ISIJ International, 54(7) pp. 1715–1718.

Frankel, P. G.; Wei, J.; Francis, E. M.; Forsey, A.; Ni, N.; Lozano-Perez, S.; Ambard, A.; Blat-Yrieix, M.; Comstock, R. J.; Hallstadius, L.; Moat, R.; Grovenor, C. R. M.; Lyon, S.; Cottis, R. A. and Preuss, M. (2014). Effect of Sn on Corrosion Mechanisms in Advanced Zr-Cladding for Pressurised Water Reactors. In: Zirconium in the Nuclear Industry: 17th Volume, pp. 404–437.

2013To Top

Frankel, P.; Wei, J.; Smith, J.; Lyon, S.; Cottis, R. A.; Preuss, M.; Ni, N.; Lozano-Perez, S.; Moore, K. L.; Yardley, S. S.; Grovenor, C. R. M.; Smith, G.; Sykes, J.; Ambard, A.; Blat-Yrieix, M.; Comstock, R. J.; Hallstadius, L.; Francis, E.; Forsey, A. and Moat, R. (2013). The effect of Sn on corrosion mechanisms in advanced Zr-cladding for pressurised water reactors. In: 17th International Symposium on Zirconium in the Nuclear Industry, 03-07 Feb 2013, Hyderabad.

Zhang, Shu Yan; Evans, Alexander; Eren, Elvin; Chen, Bo; Pavier, Martyn; Wang, Yiqiang; Pierret, Stephane; Moat, Richard and Mori, Ben (2013). ENGIN-X – instrument for materials science and engineering research. Neutron News, 24(3) pp. 22–26.

Ramjaun, T.; Stone, H. J.; Karlsson, L.; Kelleher, J.; Moat, R. J.; Kornmeier, J. R.; Dalaei, K. and Bhadeshia, H. K. D. H. (2013). Effect of interpass temperature on residual stresses in multipass welds produced using low transformation temperature filler alloy. Science and Technology of Welding & Joining, 19(1) pp. 44–51.

2012To Top

Moat, R. J.; Zhang, S. Y.; Kelleher, J.; Mark, A. F.; Mori, T. and Withers, P. J. (2012). Work hardening induced by martensite during transformation-induced plasticity in plain carbon steel. Acta Materialia, 60(20) pp. 6931–6939.

Obasi, G.C.; Moat, R.J.; Leo Prakash, D.G.; Kockelmann, W.; Quinta da Fonseca, J. and Preuss, M. (2012). In situ neutron diffraction study of texture evolution and variant selection during the α→β→α phase transformation in Ti–6Al–4V. Acta Materialia, 60(20) pp. 7169–7182.

Bhamji, I.; Preuss, M.; Moat, R. J.; Threadgill, P. L. and Addison, A. C. (2012). Linear friction welding of aluminium to magnesium. Science and Technology of Welding & Joining, 17(5) pp. 368–374.

Bhamji, I.; Moat, R. J.; Preuss, M.; Threadgill, P. L.; Addison, A. C. and Peel, M. J. (2012). Linear friction welding of aluminium to copper. Science and Technology of Welding & Joining, 17(4) pp. 314–320.

2011To Top

Obasi, G. C.; Moat, R. J.; Prakash, D. G. Leo; Kockelmann, W.; Quinta da Fonseca, J. and Preuss, M. (2011). In Situ observation on the influence of ß grain growth on texture evolution during phase transformation in Ti-6A-4V. Materials Science Forum, 702/3 pp. 854–857.

Moat, R. J.; Stone, H. J.; Shirzadi, A. A.; Francis, J. A.; Kundu, S.; Mark, A. F.; Bhadeshia, H. K. D. H.; Karlsson, L. and Withers, P. J. (2011). Design of weld fillers for mitigation of residual stresses in ferritic and austenitic steel welds. Science and Technology of Welding & Joining, 16(3) pp. 279–284.

Moat, R. J.; Karadge, M.; Preuss, M.; Bray, S. E. and Rawson, M. (2011). Detailed diffraction and electron microscopy study of inertia-friction-welded dissimilar high-strength steels. Metallurgical and Materials Transactions A, 42(10) pp. 3130–3140.

Ahsan, M. Naveed; Pinkerton, Andrew J.; Moat, Richard J. and Shackleton, Judith (2011). A comparative study of laser direct metal deposition characteristics using gas and plasma-atomized Ti–6Al–4V powders. Materials Science and Engineering: A, 528(25-26) pp. 7648–7657.

Attallah, M. M.; Terasaki, H.; Moat, R. J.; Bray, S. E.; Komizo, Y. and Preuss, M. (2011). In-situ observation of primary γ′ melting in Ni-base superalloy using confocal laser scanning microscopy. Materials Characterization, 62(8) pp. 760–767.

Moat, R. J.; Pinkerton, A.J.; Li, L.; Withers, P. J. and Preuss, M. (2011). Residual stresses in laser direct metal deposited Waspaloy. Materials Science and Engineering: A, 528(6) pp. 2288–2298.

Iqbal, N.; Rolph, J.; Moat, R.; Hughes, D.; Hofmann, M.; Kelleher, J.; Baxter, G.; Withers, P. J. and Preuss, M. (2011). A comparison of residual stress development in inertia friction welded fine grain and coarse grain nickel-base superalloy. Metallurgical and Materials Transactions A, 42(13) pp. 4056–4063.

2010To Top

Bhamji, Imran; Preuss, Michael; Threadgill, Philip L.; Moat, Richard J.; Addison, Adrian C. and Peel, Matthew J. (2010). Linear friction welding of AISI 316L stainless steel. Materials Science and Engineering: A, 528(2) pp. 680–690.

Prakash, D. G. Leo; Ding, R.; Moat, R. J.; Jones, I.; Withers, P. J.; Fonseca, J. Quinta da and Preuss, M. (2010). Deformation twinning in Ti-6Al-4V during low strain rate deformation to moderate strains at room temperature. Materials Science and Engineering: A, 527(21-22) pp. 5734–5744.

2009To Top

Moat, R. J.; Pinkerton, A. J.; Li, L.; Withers, P. J. and Preuss, M. (2009). Crystallographic texture and microstructure of pulsed diode laser-deposited Waspaloy. Acta Materialia, 57(4) pp. 1220–1229.

Moat, R. J.; Hughes, D. J.; Steuwer, A.; Iqbal, N.; Preuss, M.; Bray, S. E. and Rawson, M. (2009). Residual stresses in inertia-friction-welded dissimilar high-strength steels. Metallurgical and Materials Transactions A, 40(9) pp. 2098–2108.

2008To Top

Moat, Richard; Karadge, Mallikarjun; Preuss, Michael; Bray, Simon and Rawson, Martin (2008). Phase transformations across high strength dissimilar steel inertia friction weld. Journal of Materials Processing Technology, 204(1-3) pp. 48–58.

Export

Subscribe to these results

get details to embed this page in another page Embed as feed [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0