The Open UniversitySkip to content
 

Items Authored or Edited by Martin Rist

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0 [Create Shortened URL] SURL
Number of items: 14.

Githinji, David N.; Northover, Shirley; Bouchard, P. John and Rist, Martin A. (2013). An EBSD study of the deformation of service-aged 316 austenitic steel. Metallurgical and Materials Transactions A, 44(9) pp. 4150–4167. file

Lalvani, Himanshu; Rist, Martin and Brooks, Jeffery W. (2010). Effect of delta phase on the hot deformation behaviour and microstructural evolution of Inconel 718. Advanced Materials Research, 89-91 pp. 313–318.

Sefton, D. E.; Rist, M. A. and Gungor, S. (2009). Rate-dependent deformation of Sn–3.5Ag lead-free solder. Journal of Materials Science: Materials in Electronics, 20(11) pp. 1083–1089.

Mulyadi, M.; Rist, M.; Edwards, L.; Brooks, J. W. and Wilson, A. F. (2007). A hot deformation model for two-phase titanium alloys based on an internal state-variable approach. In: Niinomi, M.; Akiyama, S.; Ikeda, M.; Hagiwara, M. and Maruyama, K. eds. Ti-2007 Science and Technology, Volume 1. Sendai, Japan: The Japan Institute of Metals, pp. 315–318.

Mulyadi, M.; Rist, M.A.; Edwards, L. and Brooks, J.W. (2006). Parameter optimisation in constitutive equations for hot forging. Journal of Materials Processing Technology, 177(1-3) pp. 311–314.

Rist, Martin A.; Plumbridge, W.J. and Cooper, S. (2006). Creep-constitutive behavior of Sn-3.8Ag-0.7Cu solder using an internal stress approach. Journal of Electronic Materials, 35(5) pp. 1050–1058.

Rist, M.A.; Tin, S.; Roder, B.A.; James, J.A. and Daymond, M.R. (2006). Residual stresses in a quenched superalloy turbine disc: measurements and modeling. Metallurgical and Materials Transactions A, 37(2) pp. 459–467.

Tin, S.; Lee, P.D.; Kermanpur, A.; Rist, M. and McLean, M. (2005). Integrated Modeling for the Manufacture of Ni-Based Superalloy Discs from Solidification to Final Heat Treatment. Metallurgical and Materials Transactions A, 36A(9) pp. 2493–2504.

Rist, Martin; Mulyadi, M.; Edwards, Lyndon and Brooks, J.W. (2005). Optimisation and confidence region estimation of constitutive parameters in equations for hot metal deformation. In: Banabic, D. ed. Proceedings of the 8th Esaform Conference on Material Forming, Volume 1. Bucuresti, Romania: The Publishing House of the Romanian Academy, pp. 61–64.

Dye, D.; Roder, B.A.; Tin, S.; Rist, M.A.; James, J.A. and Daymond, M.R. (2004). Modeling and measurement of residual stresses in a forged IN718 superalloy disc. In: Not Set ed. Superalloys 2004. Warrendal, PA, USA: Minerals, Metals and Materials Society, pp. 315–322.

Rist, M.A. and Reed, R.C. (2002). Inverse method for parameter optimisation in superalloy tertiary creep equations. Materials Science and Technology, 18(2) pp. 179–186.

Rist, M.A.; Sammonds, P.R.; Oerter, H. and Doake, C.S.M. (2002). Fracture of Antarctic shelf ice. Journal of Geophysical Research: Solid Earth, 107(B1)

Rist, Martin; Roberts, S.M.; Reed, R.C. and Brooks, J.W. (2002). A state-variable model for the hot deformation of Waspaloy. In: Pietrzyk, M.; Mitura, Z. and Kaczmar, J. eds. The 5th International ESAFORM Conference on Material Forming. Krakow, Poland: Publishing House Akapit, pp. 635–638.

Rist, M.A. and Reed, R.C. (2001). Characterization of superalloy tertiary creep by inverse modeling. In: Zhao, J.C.; Fahrmann, M. and Pollock, T.M. eds. Materials Design Approaches and Experiences. Warrendale, PA, USA: Minerals, Metals and Materials Society, pp. 255–265.

This list was generated on Wed Apr 23 22:48:33 2014 BST.

Policies | Disclaimer

© The Open University   + 44 (0)870 333 4340   general-enquiries@open.ac.uk