The Open UniversitySkip to content

Browse by Journal

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0 [Create Shortened URL] SURL
Group by: Published Date | Item Type | No Grouping
Jump to: 2015 | 2011 | 2006 | 2005 | 2004 | 2003 | 2000
Number of items: 9.


Acar, Murat O. and Gungor, Salih (2015). Experimental and numerical study of strength mismatch in cross-weld tensile testing. Journal of Strain Analysis for Engineering Design, 50(6) pp. 349–365. file


Hosseinzadeh, F.; Mahmoudi, A. H.; Truman, C. E. and Smith, D. J. (2011). Application of deep hole drilling to the measurement and analysis of residual stresses in steel shrink fitted assemblies. Strain, 47(S2) pp. 412–426.

Liljedahl, C. D. M.; Fitzpatrick, M. E.; Zanellato, O. and Edwards, L. (2011). Effect of temperature on the residual stresses in an integral structure with a crack-retarding patch. Strain, 47(S2) pp. 293–298.

Nadri, B.; Bouchard, P. J.; Smith, M.; Truman, C. E. and Smith, D. J. (2011). Modelling and statistical treatment of residual stress distributions in an edge welded stainless steel beam. Strain, 47(6) pp. 505–517.


Lee, K. S.; Moreton, D. N.; Bouchard, P. J. and Moffat, D. G. (2006). The post-yield behaviour of an internally pressurised cylinder having a pad attachment. Strain, 42(4) pp. 305–314.


Zhang, Y.; Fitzpatrick, M. E. and Edwards, L. (2005). Analysis of the residual stress around a cold-expanded fastener hole in a Finite Plate. Strain, 41(2) pp. 59–70.


Stefanescu, D.; Steuwer, A.; Owen, R. A.; Nadri, B.; Edwards, L.; Fitzpatrick, M. E. and Withers, P. J. (2004). Elastic strains around cracked cold-expanded fastener holes measured using the synchrotron X-ray diffraction technique. Journal of Strain Analysis for Engineering Design, 39(5) pp. 459–469.


Stefanescu, D.; Dutta, M; Wang, D. Q.; Edwards, L. and Fitzpatrick, M. E. (2003). The effect of high compressive loading on residual stresses and fatigue crack growth at cold expanded holes. Journal of Strain Analysis for Engineering Design, 38(5) pp. 419–427.


Smith, D. J.; Bouchard, P. J. and George, D. (2000). Measurement and prediction of residual stresses in thick-section steel welds. Journal of Strain Analysis for Engineering Design, 35(4) pp. 287–305. file

This list was generated on Wed Nov 25 22:09:29 2015 GMT.

Policies | Disclaimer

© The Open University   + 44 (0)870 333 4340