The Open UniversitySkip to content
 

Browse by Journal

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0 [Create Shortened URL] SURL
Group by: Published Date | Item Type | No Grouping
Jump to: 2015 | 2014 | 2013 | 2012 | 2011 | 2009 | 2002 | 1998
Number of items: 16.

2015

Burnett, T. L.; Geurts, R.; Jazaeri, H.; Northover, S. M.; McDonald, S. A.; Haigh, S. J.; Bouchard, P. J. and Withers, P. J. (2015). Multiscale 3D analysis of creep cavities in AISI type 316 stainless steel. Materials Science and Technology, 31(5) pp. 522–534.

Jazaeri, H.; Bouchard, P. J.; Hutchings, M. T.; Mamun, A. A. and Heenan, R. K. (2015). Application of small angle neutron scattering to study creep cavitation in stainless steel weldments. Materials Science and Technology, 31(5) pp. 535–539.

Lu, W. J.; Zhang, X. F. and Qin, R. S. (2015). Stability of precipitates under electropulsing in 316L stainless steel. Materials Science and Technology (In press).

Qin, R. S. (2015). Critical assessment 8: Outstanding issues in electropulsing processing. Materials Science and Technology, 31(2) pp. 203–206.

Qin, R. S. and Bhowmik, A. (2015). Computational thermodynamics in electric current metallurgy. Materials Science and Technology (Early access).

2014

Jazaeri, H.; Bouchard, P. J.; Hutchings, M. and Lindner, P. (2014). Study of creep cavitation in stainless steel weldment. Materials Science and Technology, 30(1) pp. 38–42. restricted access item, not available for direct download

Qin, R. S.; Rahnama, A.; Lu, W.J.; Zhang, X. F. and Elliott-Bowman, B. (2014). Electropulsed steels. Materials Science and Technology, 30(9) pp. 1040–1044.

2013

Hu, Feng; Wu, Kaiming; Hou, Tingping and Shirzadi, Amir A. (2013). Tempering stability of retained austenite in nanostructured dual-phase steels. Materials Science and Technology, 29(8) pp. 947–953. file

Zhang, X. F. and Komizo, Y. (2013). Visual analysis of solidification of δ–γ transformations in steels. Materials Science and Technology, 29(5) pp. 631–635.

Zhang, X. F.; Terasaki, H. and Komizo, Y. (2013). In situ observations of phase transformation during C-Mn-Al steel weld solidification. Materials Science and Technology, 29(11) pp. 1363–1372.

2012

Zhang, X. F.; Han, P.; Terasaki, H.; Sato, M. and Komizo, Y. (2012). Analysis investigation of prior austenite grain size dependence of low temperature toughness in steel weld metal. Journal of Materials Science &Technology, 28(3) pp. 241–248.

2011

Zhang, X. F.; Liu, H.Y.; Guo, J. D. and Shang, J. K. (2011). Inhibition of electromigration in eutectic SnBi solder interconnect by plastic prestraining. Journal of Materials Science & Technology, 27(11) pp. 1072–1076.

2009

Hosseinzadeh, F.; Smith, D. J. and Truman, C. E. (2009). Through thickness residual stresses in large rolls and sleeves for metal working industry. Materials Science and Technology, 25(7) pp. 862–873.

2002

Fitzpatrick, M. E.; Moffatt, J. E.; Dubois, A.; Gregoire, F. and Tarrant, A. D (2002). Influence of heat treatment processes on fatigue performance of particle reinforced aluminium alloys. Materials Science and Technology, 18(12) pp. 1453–1457.

Rist, M.A. and Reed, R.C. (2002). Inverse method for parameter optimisation in superalloy tertiary creep equations. Materials Science and Technology, 18(2) pp. 179–186.

1998

Fitzpatrick, M. E.; Dutta, M. and Edwards, L. (1998). Determination by neutron diffraction of effect of plasticity on crack tip strains in a metal matrix composite. Materials Science and Technology, 14(9-10) pp. 980–986.

This list was generated on Fri May 22 16:28:21 2015 BST.

Policies | Disclaimer

© The Open University   + 44 (0)870 333 4340   general-enquiries@open.ac.uk