Browse by Journal

Export as	Atom RSS 1.0 RSS 2.0 SURL

Embed as feed

Group by: Published Date | Item Type | No Grouping

Number of items: 17.

Ahmed, R.; Yu, H. Q.; Stoica, V.; Edwards, L. and Santisteban, J. R. (2008). Neutron diffraction residual strain measurements in post-treated thermal spray cermet coatings. Materials Science and Engineering A, 498(1-2) pp. 191–202.

Baake, Michael; Grimm, Uwe; Joseph, Dieter and Repetowicz, Przemyslaw (2000). Averaged shelling for quasicrystals. Materials Science and Engineering A, 294-296 pp. 441–445.

Balart, M.J.; Bouzina, A.; Edwards, L. and Fitzpatrick, M.E. (2004). The onset of tensile residual stresses in grinding of hardened steels. Materials Science and Engineering A, 367(1-2) pp. 132–142.

Barry, N.; Hainsworth, S. V. and Fitzpatrick, M. E. (2009). Effect of shot peening on the fatigue behaviour of cast magnesium A8. Materials Science and Engineering A, 507(1-2) pp. 50–57.

Ganguly, S.; Stelmukh, V.; Fitzpatrick, M. E. and Edwards, L. (2008). Analysis of residual stress in metal-inert-gas-welded Al-2024 using neutron and synchrotron X-ray diffraction. Materials Science and Engineering A, 491(1-2) pp. 248–257.

Ganguly, S.; Edwards, L. and Fitzpatrick, M. E. (2010). Problems in using a comb sample as a stress-free reference for the determination of welding residual stress by diffraction. Materials Science and Engineering A, 528(3) pp. 1226–1232.

Grimm, Uwe; Roemer, Rudolf A.; Schreiber, Michael and Zhong, Jian-Xin (2000). Universal level-spacing statistics in quasiperiodic tight-binding models. Materials Science and Engineering A, 294-296 pp. 564–567.

Khan, M. K.; Fitzpatrick, M. E.; Hainsworth, S. V. and Edwards, L. (2009). Effect of tool profile and fatigue loading on the local hardness around scratches in clad and unclad aluminium alloy 2024. Materials Science and Engineering A, 527(1-2) pp. 297–304.

Kleber, X. and Pirfo Barroso, S. (2010). Investigation of shot-peened austenitic stainless steel 304L by means of magnetic Barkhausen noise. Materials Science and Engineering A, 527(21-22) pp. 6046–6052.

Lefebvre, F.; Ganguly, S. and Sinclair, I. (2005). Micromechanical aspects of fatigue in a MIG welded aluminium airframe alloyPart 1. Microstructural characterization. Materials Science and Engineering A, 397(1-2) pp. 338–345.

Liljedahl, C. D. M.; Fitzpatrick, M. E. and Edwards, L. (2008). Distortion and residual stresses in structures reinforced with titanium straps for improved damage tolerance. Materials Science and Engineering A, 486(1-2) pp. 104–111.

Liljedahl, C. D. M.; Fitzpatrick, M. E. and Edwards, L. (2009). Evolution of residual stresses with fatigue crack growth in integral structures with crack retarders. Materials Science and Engineering A, 523(1-2) pp. 152–159.

Liu, X.W. and Plumbridge, W.J. (2003). Thermomechanical fatigue of Sn–37 wt.% Pb model solder joints. Materials Science and Engineering A, 362(1-2) pp. 309–321.

Paddea, S.; Francis, J. A.; Paradowska, A M; Bouchard, P. J. and Shibli, I. A. (2012). Residual Stress Distributions in a P91 Steel-Pipe Girth Weld before and after Post Weld Heat Treatment. Materials Science and Engineering A, 534 pp. 663–672.

Pratihar, S.; Stelmukh, V.; Hutchings, M.T.; Fitzpatrick, M.E.; Stuhr, U. and Edwards, L. (2006). Measurement of the residual stress field in MIG-welded Al-2024 and Al-7150 aluminium alloy compact tension specimens. Materials Science and Engineering A, 437(1) pp. 46–53.

Repetowicz, Przemyslaw; Grimm, Uwe and Schreiber, Michael (2000). Planar quasiperiodic Ising models. Materials Science and Engineering A, 294-296 pp. 638–641.

Santisteban, J. R.; Oliver, E. C.; Daymond, M. R.; Alianelli, L. and Edwards, L. (2006). Tensile deformation of a Cu mosaic crystal along the [110] direction studied by time of flight neutron transmission. Materials Science and Engineering A, 437(1) pp. 151–156.

This list was generated on Tue May 21 21:43:21 2013 BST.

Policies | Disclaimer