The Open UniversitySkip to content

Open Research Online
Browse by Journal

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0 [Create Shortened URL] SURL
Group by: Published Date | Item Type | No Grouping
Jump to: 2017 | 2015 | 2014 | 2012 | 2011 | 2010 | 2008 | 2004
Number of items: 10.


Mamun, A. A.; Moat, R. J.; Kelleher, J. and Bouchard, P. J. (2017). Origin of the Bauschinger effect in a polycrystalline material. Materials Science and Engineering: A (Accepted Manuscript). restricted access item, not available for direct download


Rahnama, A. and Qin, R. S. (2015). The effect of electropulsing on the interlamellar spacing and mechanical properties of a hot-rolled 0.14% carbon steel. Materials Science and Engineering: A, 627 pp. 145–152.


Mark, A. F.; Moat, R.; Forsey, A.; Abdolvand, H. and Withers, P. J. (2014). A new method for quantifying anisotropic martensitic transformation strains accumulated during constrained cooling. Materials Science and Engineering: A, 611 pp. 354–361. file


Dorman, M.; Toparli, M. B.; Smyth, N.; Cini, A.; Fitzpatrick, M. E. and Irving, P. E. (2012). Effect of laser shock peening on residual stress and fatigue life of clad 2024 aluminium sheet containing scribe defects. Materials Science and Engineering: A, 548 pp. 142–151. file


Ahsan, M. Naveed; Pinkerton, Andrew J.; Moat, Richard J. and Shackleton, Judith (2011). A comparative study of laser direct metal deposition characteristics using gas and plasma-atomized Ti–6Al–4V powders. Materials Science and Engineering: A, 528(25-26) pp. 7648–7657.

Moat, R. J.; Pinkerton, A.J.; Li, L.; Withers, P. J. and Preuss, M. (2011). Residual stresses in laser direct metal deposited Waspaloy. Materials Science and Engineering: A, 528(6) pp. 2288–2298.


Bhamji, Imran; Preuss, Michael; Threadgill, Philip L.; Moat, Richard J.; Addison, Adrian C. and Peel, Matthew J. (2010). Linear friction welding of AISI 316L stainless steel. Materials Science and Engineering: A, 528(2) pp. 680–690.

Prakash, D. G. Leo; Ding, R.; Moat, R. J.; Jones, I.; Withers, P. J.; Fonseca, J. Quinta da and Preuss, M. (2010). Deformation twinning in Ti-6Al-4V during low strain rate deformation to moderate strains at room temperature. Materials Science and Engineering: A, 527(21-22) pp. 5734–5744.


Shirzadi, A. A.; Zhu, Y. and Bhadeshia, H. K. D. H. (2008). Joining ceramics to metals using metallic foam. Materials Science and Engineering: A, 496(1-2) pp. 501–506. file


Balart, M.J.; Bouzina, A.; Edwards, L. and Fitzpatrick, M.E. (2004). The onset of tensile residual stresses in grinding of hardened steels. Materials Science and Engineering: A, 367(1-2) pp. 132–142.

This list was generated on Thu Dec 14 21:33:30 2017 GMT.

Policies | Disclaimer

© The Open University   contact the OU