The Open UniversitySkip to content
 

Browse by Journal

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0 [Create Shortened URL] SURL
Group by: Published Date | Item Type | No Grouping
Jump to: 2013 | 2009 | 2008 | 2007 | 2005 | 2001
Number of items: 13.

2013

Haigh, R.D.; Hutchings, M. T.; James, J. A. ; Ganguly, S.; Mizuno, R.; Ogawa, K.; Okido, S.; Paradowska, A.M. and Fitzpatrick, M. E. (2013). Neutron diffraction residual stress measurements on girth-welded 304 stainless steel pipes with weld metal deposited up to half and full pipe wall thickness. International Journal of Pressure Vessels and Piping, 101 pp. 1–11. file

2009

Bouchard, P. J. (2009). The NeT bead-on-plate benchmark for weld residual stress simulation. International Journal of Pressure Vessels and Piping, 86(1) pp. 31–42.

Pratihar, S.; Turski, M.; Edwards, L. and Bouchard, P. J. (2009). Neutron diffraction residual stress measurements in a 316L stainless steel bead-on-plate weld specimen. International Journal of Pressure Vessels and Piping, 86(1) pp. 13–19.

Turski, M. and Edwards, L. (2009). Residual stress measurement of a 316l stainless steel bead-on-plate specimen utilising the contour method. International Journal of Pressure Vessels and Piping, 86(1) pp. 126–131.

2008

Bouchard, P. J. (2008). Code characterisation of weld residual stress levels and the problem of innate scatter. International Journal of Pressure Vessels and Piping, 85(3) pp. 152–165.

Withers, P. J.; Turski, M.; Edwards, L.; Bouchard, P. J. and Buttle, D. J. (2008). Recent advances in residual stress measurement. International Journal of Pressure Vessels and Piping, 85(3) pp. 118–127.

2007

Bouchard, P. J. (2007). Validated residual stress profiles for fracture assessments of stainless steel pipe girth welds. International Journal of Pressure Vessels and Piping, 84(4) pp. 195–222.

2005

Bouchard, P. J.; George, D.; Santisteban, J. R.; Bruno, G.; Dutta, M.; Edwards, L.; Kingston, E. and Smith, D. J. (2005). Measurement of the residual stresses in a stainless steel pipe girth weld containing long and short repairs. International Journal of Pressure Vessels and Piping, 82(4) pp. 299–310.

Bouchard, P. J. (2005). Special issue of the International Journal of Pressure Vessels and Piping on residual stresses at repair welds. Elsevier. file

Dong, P.; Hong, J. K. and Bouchard, P. J. (2005). Analysis of residual stresses at weld repairs. International Journal of Pressure Vessels and Piping, 82(4) pp. 258–269.

Edwards, L.; Bouchard, P.J.; Dutta, M.; Wang, D.Q.; Santisteban, J.R.; Hiller, S. and Fitzpatrick, M.E. (2005). Direct measurement of the residual stresses near a 'boat-shaped' repair in a 20 mm thick stainless steel tube butt weld. International Journal of Pressure Vessels and Piping, 82(4) pp. 288–298.

Elcoate, C. D.; Dennis, R. J.; Bouchard, P. J. and Smith, M. C. (2005). Three dimensional multi-pass repair weld simulations. International Journal of Pressure Vessels and Piping, 82(4) pp. 244–257. file

2001

Bouchard, P. J.; Goldthorpe, M. R. and Prottey, P. (2001). J-integral and local damage fracture analyses for a pump casing containing large weld repairs. International Journal of Pressure Vessels and Piping, 78(4) pp. 295–305.

This list was generated on Tue Apr 15 21:58:37 2014 BST.

Policies | Disclaimer

© The Open University   + 44 (0)870 333 4340   general-enquiries@open.ac.uk