The Open UniversitySkip to content
 

Browse by Journal

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0 [Create Shortened URL] SURL
Group by: Published Date | Item Type | No Grouping
Jump to: 2014 | 2013 | 2011 | 2009 | 2008 | 2007 | 2006 | 2005 | 2001
Number of items: 16.

2014

Gagg, Colin (2014). Cement and concrete as an engineering material: an historic appraisal and case study analysis. Engineering Failure Analysis, 40 pp. 114–140.

Gagg, Colin and Amsterdam, Emiel (2014). Special issue on ICEFA V-Part II. Engineering Failure Analysis, 41 pp. 1–134.

2013

Gagg, Colin and Amsterdam, Emiel (2013). Special issue on ICEFA V- Part 1. Engineering Failure Analysis. Vol 35, Pages 1-742.

2011

Gagg, Colin R. and Lewis, Peter (2011). The rise and fall of cast iron in Victorian structures – a case study review. Engineering Failure Analysis, 18(8) pp. 1963–1980.

2009

Gagg, C. R. and Lewis, P. R. (2009). In-service fatigue failure of engineered products and structures – Case study review. Engineering Failure Analysis, 16(6) pp. 1775–1793.

Lewis, Peter R. and Gagg, Colin R. (2009). Failure of an epidural catheter. Engineering Failure Analysis, 16(6) pp. 1805–1815.

Plumbridge, W. J. (2009). New avenues for failure analysis. Engineering Failure Analysis, 16(5) pp. 1347–1354.

2008

Gagg, C. R.; Lewis, P. R. and Tsang, C. (2008). Premature failure of a vacuum pump impeller rotor recovered from a pitch impregnation plant. Engineering Failure Analysis, 15(5) pp. 606–615.

Gagg, Colin. R. and Lewis, Peter. R. (2008). Environmentally assisted product failure – Synopsis and case study compendium. Engineering Failure Analysis, 15(5) pp. 505–520.

2007

Gagg, C. R. and Lewis, P. R. (2007). Counterfeit coin of the realm – Review and case study analysis. Engineering Failure Analysis, 14(6) pp. 1144–1152.

Gagg, Colin. R. and Lewis, Peter. R. (2007). Wear as a product failure mechanism – Overview and case studies. Engineering Failure Analysis, 14(8) pp. 1618–1640.

2006

Lewis, Peter. R. and Hainsworth, Sarah. V. (2006). Fuel line failure from stress corrosion cracking. Engineering Failure Analysis, 13(6) pp. 946–962.

2005

Gagg, C. R. (2005). Failure of components and products by ‘engineered-in’ defects: Case studies. Engineering Failure Analysis, 12(6) pp. 1000–1026.

Gagg, Colin (2005). Domestic product failures: Case studies. Engineering Failure Analysis, 12(5) pp. 784–807.

2001

Gagg, C. R. (2001). Premature failure of thread rolling dies: material selection, hardness criteria and case studies. Engineering Failure Analysis, 8(1) pp. 87–105.

Gagg, C. R. (2001). Failure of stainless steel water pump couplings. Engineering Failure Analysis, 8(2) pp. 189–199.

This list was generated on Fri Dec 19 21:49:48 2014 GMT.

Policies | Disclaimer

© The Open University   + 44 (0)870 333 4340   general-enquiries@open.ac.uk