Currently browsing: Faculty of Science, Technology, Engineering and Mathematics (STEM) > Engineering and Innovation

Number of items at this level: 3334.
Generated on Wed Sep 30 13:09:17 2020 BST.

Jump to:

2021 | 2020 | 2019 | 2018 | 2017 | 2016 | 2015 | 2014 | 2013 | 2012 | 2011 | 2010 | 2009 | 2008 | 2007 | 2006 | 2005 | 2004 | 2003 | 2002 | 2001 | 2000 | 1999 | 1998 | 1997 | 1996 | 1995 | 1994 | 1993 | 1992 | 1991 | 1990 | 1989 | 1988 | 1987 | 1986 | 1985 | 1984 | 1983 | 1982 | 1981 | 1980 | 1979 | 1978

2021To Top

Akbarian, SH.; Zarei-Hanzaki, A.; Anoushe, A.S.; Abedi, H.R.; Unnikrishnan, R. and Cios, G. (2021). Step-by-step texture modification through strain path change toward improvement of the hardening capacity in a twinning-induced-plasticity steel. Materials Science and Engineering: A, 799, article no. 140269.

Baragau, Ioan-Alexandru; Lu, Zhen; Power, Nicholas P.; Morgan, David J.; Bowen, James; Diaz, Pedro and Kellici, Suela (2021). Continuous hydrothermal flow synthesis of S-functionalised carbon quantum dots for enhanced oil recovery. Chemical Engineering Journal, 405, article no. 126631.

2020To Top

Reynolds, M and Holwell, S eds. (2020). Systems approaches to making change: a practical guide (Table of contents and Preface to 2nd edition). London: Open University and Springer.

Ahmed, Sana (2020). Is the household food waste bin a source of potential health impacts? The Open University.

Allan, Catherine; Ison, Ray L.; Colliver, Ross; Mumaw, Laura; MacKay, Moragh; Perez-Mujica, Luisa and Wallis, Philip (2020). Jumping Off the treadmill: transforming NRM to systemic governing with systemic co-inquiry. Policy Studies, 41(4) pp. 350–371.

Anderson, Jane and Moncaster, Alice (2020). Embodied carbon of concrete in buildings: Part 1 - analysis of published EPD. Buildings and Cities, 1(1) pp. 198–217.

Bowen, James and Cheneler, David (2020). Closed-Form Expressions for Contact Angle Hysteresis: Capillary Bridges between Parallel Platens. Colloids and Interfaces, 4(1), article no. 13.

Bowers, Lisa and Hayle, Ryan (2020). Creative haptics: an evaluation of a haptic tool for non-sighted and visually impaired design students, studying at a distance. British Journal of Visual Impairment (Early Access).

Brokx, John (2020). Modelling Peak Shifts not Resulting from Lattice Strain in Anisotropic and Inhomogeneous Materials using Monte-Carlo Simulation of Neutron Diffraction. PhD thesis The Open University.

Chapman, S. C.; Horne, R. B. and Watkins, N. W. (2020). Using the aa index over the last 14 solar cycles to characterize extreme geomagnetic activity. Geophysical Research Letters, 47(3), article no. e2019GL086524.

Chapman, S. C.; McIntosh, S. W.; Leamon, R. J. and Watkins, N. W. (2020). Quantifying the Solar Cycle Modulation of Extreme Space Weather. Geophysical Research Letters, 47(11), article no. e2020GL087795.

Chapman, S. C.; Murphy, E. J.; Stainforth, D. A. and Watkins, N.W. (2020). Trends in Winter Warm Spells in the Central England Temperature Record. Journal of Applied Meteorology and Climatology, 59(6) pp. 1069–1076.

Corrigan-Kavanagh, E.; Scarles, C.; Revill, G.; Beynon, M. and van Duppen, J. (2020). Explorations on the future of the book from the Next Generation Paper Project. Publishing History (In press).

Das, Yadunandan; Liu, Jianling; Wessman, Sten; Xu, Xin; Odqvist, Joakim; King, Stephen and Hedström, Peter (2020). Small-angle neutron scattering quantification of phase separation and the corresponding embrittlement of a super duplex stainless steel after long-term aging at 300°C. Materialia, 12, article no. 100771. (In Press)

Dey, Avishek; Ghosh, Paheli; Bowen, James; Braithwaite, N St.J and Krishnamurthy, Satheesh (2020). Engineering work function of graphene oxide from p to n type using a low power atmospheric pressure plasma jet. Physical Chemistry Chemical Physics, 22(15) pp. 7685–7698.

Ding, Rengen; Chiu, Yulung; Chu, Mingqiang; Paddea, Sanjooram and Su, Guanqiao (2020). A study of fracture behaviour of gamma lamella using the notched TiAl micro-cantilever. Philosophical Magazine. Part A: Materials Science (Early Access).

Eckert, Claudia; Isaksson, Ola; Eckert, Calandra; Coeckelbergh, Mark and Hagström, Malin Hane (2020). Data Fairy in Engineering Land: The Magic of Data Analysis as a Sociotechnical Process in Engineering Companies. Journal of Mechanical Design, 142(12), article no. 121402.

Enoch, M.P.; Cross, R.; Potter, N.; Davidson, C.; Taylor, S.; Brown, R.; Huang, H.; Parsons, J.; Tucker, S.; Wynne, E.; Grieg, D.; Campbell, G.; Jackson, A. and Potter, S. (2020). Future local passenger transport system scenarios and implications for policy and practice. Transport Policy (Early Access).

Enoch, Marcus and Warren, James P. (2020). Looking through a windscreen: managing the future of automobility. Applied Mobilites, 20 (Early access).

Franzke, Christian L.E.; Barbosa, Susana; Blender, Richard; Fredriksen, Hege‐Beate; Laepple, Thomas; Lambert, Fabrice; Nilsen, Tine; Rypdal, Kristoffer; Rypdal, Martin; Scotto, Manuel G.; Vannitsem, Stéphane; Watkins, Nicholas W.; Yang, Lichao and Yuan, Naiming (2020). The Structure of Climate Variability Across Scales. Reviews of Geophysics (Early Access).

Ghosh, Paheli; Ivaturi, Aruna; Bhattacharya, Debabrata; Bowen, James; Nixon, Tony; Kowal, Jan; Braithwaite, Nicholas St John and Krishnamurthy, Satheesh (2020). Efficient hole transport material formed by atmospheric pressure plasma functionalization of Spiro-OMeTAD. Materials Today Chemistry, 17, article no. 100321.

Gladding, T.L.; Rolph, C.A.; Gwyther, C.L.; Kinnersley, R.; Walsh, K. and Tyrrel, S. (2020). Concentration and composition of bioaerosol emissions from intensive farms: Pig and poultry livestock. Journal of Environmental Management, 272, article no. 111052.

Gladding, Toni; Rolph, Catherine and Wright, Paul (2020). Research into the issues associated with people sleeping in waste containers. Biffa.

Hopkins, Bryan (2020). Sustainable organisations and how people learn to create them. The Open University.

Isaksson, Ola; Eckert, Claudia; Panarotto, Massimo and Malmqvist, Johan (2020). You Need To Focus To Validate. In: Proceedings of the Design Society: DESIGN Conference, Cambridge University Press, Cambridge, 1 pp. 31–40.

Ison, Raymond and Straw, Ed (2020). The Hidden Power of Systems Thinking: Governance in a Climate Emergency. Systems Thinking. Routledge.

Jones, Darren Anthony; Eckert, Claudia and Garthwaite, Pam (2020). Managing Margins: Overdesign In Hospital Building Services. In: Proceedings of the Design Society: DESIGN Conference, Cambridge University Press, Cambridge, pp. 215–224.

Jones, Derek; Lotz, Nicole and Holden, Georgina (2020). A longitudinal study of Virtual Design Studio (VDS) use in STEM distance design education. International Journal of Technology and Design Education (In press).

Karebasar, Praveen (2020). Residual stress in polymer composites: Characterisation using Contour Method. The Open University.

Karvonen, Andrew; Cook, Matthew and Haarstad, Håvard (2020). Urban Planning and the Smart City: Projects, Practices and Politics. Urban Planning (In press).

Khayame, Houda and Abdeljawad, Mona M. (2020). Systems Thinking in Upstream Social Marketing: Using Soft Systems Methodology to Improve Midwifery Policy in Jordan. Social Marketing Quarterly, 26(2) pp. 167–183.

Li, Tao; Lockett, Helen and Lawson, Craig (2020). Using requirement-functional-logical-physical models to support early assembly process planning for complex aircraft systems integration. Journal of Manufacturing Systems, 54 pp. 242–257.

Liu, Yan; Eckert, Claudia and Earl, Christopher (2020). A review of fuzzy AHP methods for decision-making with subjective judgements. Expert Systems With Applications, 161, article no. 113738.

Liu, Yan; Eckert, Claudia M. and Earl, Christopher (2020). Assessing Suppliers for Complex Products from the Perspective of Power. IEEE Transactions on Engineering Management (Early Access).

Lotz, Nicole and Sharp, Helen (2020). Challenges for interaction design education in the South: a case study of Botswana. Journal of International Development, 32(1) pp. 62–84.

Luck, Rachael and Hamnett, Katharine (2020). Design activism in a pandemic, towards a life otherwise. In: Participation(s) otherwise: 16PDC Participatory Design Conference, 15 Jun 2020, Universidad de Caldas, Manizales, Colombia, [on-line].

Mackay, Moragh; Colliver, Ross; Wallis, Phillip J.; Ison, Ray; Davidson, Seanna and Allan, Catherine (2020). Opportunities for improving NRM governance in Victoria. Institute for Land,Water and Society, Charles Sturt University, NSW.

Mehrban, Nazia; Molina, Catalina Pineda; Quijano, Lina M.; Bowen, James; Johnson, Scott A.; Bartolacci, Joseph; Chang, Jordan T.; Scott, David A.; Woolfson, Derek N.; Birchall, Martin A. and Badylak, Stephen F. (2020). Host macrophage response to injectable hydrogels derived from ECM and α-helical peptides. Acta Biomaterialia (Early Access).

Mehta, Manan (2020). Structural, Optical And Photo-Electrochemical Properties Of H:TiO2 Nanoparticle, TiO2-MoS2 Nanocomposite And TiO2-BiVO4 Core-Shell Nanoparticle Structures. PhD thesis The Open University.

Mehta, Mannan; Krishnamurthy, Satheesh; Basu, Suddhasatwa; Nixon, Tony P. and Singh, Aadesh P. (2020). BiVO4/TiO2 core-shell heterostructure: wide range optical absorption and enhanced photoelectrochemical and photocatalytic performance. Materials Today Chemistry, 17, article no. 100283.

Mellish, Stephen James (2020). Modelling Of Sound Attenuation By Periodic, Rectangular Structures. PhD thesis The Open University.

Mellish, Steve; Taherzadeh, Shahram and Attenborough, Keith (2020). Approximate impedance models for point-to-point sound propagation over acoustically-hard ground containing rectangular grooves. The Journal of the Acoustical Society of America, 147(1) pp. 74–84.

Mifsud, Lara; Pomponi, Francesco and Moncaster, Alice M. (2020). Comparative life cycle analysis of façade passive systems in the Mediterranean: comfort, energy, and carbon. Renewable Energy, 149 pp. 347–360.

Mousavian, R. Taherzadeh; Behnamfard, S.; Khosroshahi, R. Azari; Zavasnik, J.; Ghosh, P.; Krishnamurthy, S.; Heidarzadeh, A. and Brabazon, D. (2020). Strength-ductility trade-off via SiC nanoparticle dispersion in A356 aluminium matrix. Materials Science and Engineering A, 771, article no. 138639.

Muyupa, Ellies (2020). Measurement of Deformation in Varying Stress Fields. PhD thesis The Open University.

Nagabooshanam, Shalini; John, Alishba T; Wadhwa, Shika; Mathur, Ashish; Krishnamurthy, Satheesh and Bharadwaj, Lalit M (2020). Electro-deposited nano-webbed structures based on polyaniline/multi walled carbon nanotubes for enzymatic detection of organophosphates. Food Chemistry, 323, article no. 126784.

Nuttall, William and Neighbour, Gareth (2020). Non-power applications - new missions for nuclear energy to be delivered safely and securely. In: Nian, Victor ed. Advanced Security and Safeguarding in the Nuclear Power Industry. 125 London Wall, London EC2Y 5AS, United Kingdom: Academic Press, pp. 29–47.

Nuttall, William James and Bakenne, Adetokunboh T. (2020). Fossil Fuel Hydrogen: Technical, Economic and Environmental Potential. Switzerland: Springer International Publishing.

Nyankson, Emmanuel; Amedalor, Reuben; Chandrabose, Gauthaman; Coto, Michael; Krishnamurthy, Satheesh and Kumar, R. Vasant (2020). Microwave- and Formaldehyde-Assisted Synthesis of Ag–Ag3PO4 with Enhanced Photocatalytic Activity for the Degradation of Rhodamine B Dye and Crude Oil Fractions. ACS Omega (Early access).

Panteli, C; Polycarpou, K; Morsink-Georgalli, F Z; Stasiuliene, L; Pupeikis, D; Jurelionis, A and Fokaides, P A (2020). Overview of BIM integration into the Construction Sector in European Member States and European Union Acquis. In: IOP Conference Series: Earth and Environmental Science, 410 012073.

Pearson, R.J.; Costley, A.E.; Phaal, R. and Nuttall, W.J. (2020). Technology Roadmapping for mission-led agile hardware development: a case study of a commercial fusion energy start-up. Technological Forecasting and Social Change, 158, article no. 120064.

Pearson, Richard John (2020). Towards Commercial Fusion: Innovation, Technology Roadmapping for Start-ups, and Critical Natural Resource Availability. PhD thesis The Open University.

Poznik, Michael; Stacey, Martin; Hillerbrand, Rafaela and Eckert, Claudia (2020). Designing as Playing Games of Make-Believe. Design Science (In press).

Prikhodko, Sergey V.; Savvakin, Dmytro G.; Markovsky, Pavlo E.; Stasuk, Olexander O.; Penney, James; Shirzadi, Amir A.; Davies, Peter D. and Davies, Helen M. (2020). Diffusion bonding of TiC or TiB reinforced Ti–6Al–4V matrix composites to conventional Ti–6Al–4V alloy. Science and Technology of Welding and Joining (Early access).

Psoma, Sotiria and Tourlidakis, Antonios (2020). Computational analysis and design of microchambers for multianalyte aptamer-based biosensor applications. In: 17th International Conference on Nanosciences and Nanotechnologies - NN20, 7-10 Jul 2020, Thessaloniki, Greece, p. 64.

Qin, Rongshan (2020). Computation of Electropulse-driven Regeneration of Magnetic Heterogeneous Materials. In: 2019 PhotonIcs & Electromagnetics Research Symposium - Spring (PIERS-Spring), pp. 1185–1189.

Reynolds, M. and Holwell, S. (2020) 'Chapter 1: Introducing systems approaches'. Systems approaches to making change: a practical guide 2nd Edn. pp. 1-24. London: Open University and Springer

Reynolds, M.; Lyons-White, J. and Knight, A. T. (2020). Systemic failure and the ‘Iron Triangle’ of conservation practice. In: Wyborn, Carina ed. Seeds of Change: Provocations for a new research agenda. Geneva: Luc Hoffman Institute, pp. 138–142.

Reynolds, Martin and Holwell, Sue (2020). Chapter 7 Epilogue: Systems Approaches and Systems Practice. In: Reynolds, Martin and Holwell, Sue eds. Systems Approaches to Making Change: A Practical Guide. 2nd Edn. London: Open University and Springer, pp. 307–321.

Reynolds, Martin; Ison, Raymond; Shah, Rupesh and Wilding, Helen (2020). Beyond employability: a more radical role for Higher Education in developing workplace capabilities. In: Employability Conference 2020 Expanding the narrative for a rapidly changing world, 11 Mar 2020, Walton Hall, Milton Keynes.

Robson, Linda (2020). Part-Time Distance Learners’ Experiences Of Study Breaks. In: INTED2020 Proceedings, article no. 393.

Robson, Linda and Curry, George (2020). Student motivations and choices in a ‘pick and mix’ curriculum module at the Open University, UK. In: INTED2020 Proceedings (In press).

Rodriguez, Gabriela Melo; Bowen, James; Zelzer, Mischa and Stamboulis, Artemis (2020). Selective modification of Ti6Al4V surfaces for biomedical applications. RSC Advances, 10(30) pp. 17642–17652.

Rolph, Catherine A.; Jefferson, Bruce; Brookes, Adam; Hassard, Francis and Villa, Raffaella (2020). Achieving drinking water compliance levels for metaldehyde with an acclimated sand bioreactor. Water Research, 184, article no. 116084.

Roy, M.J.; Stoyanov, N.; Moat, R.J. and Withers, P.J. (2020). pyCM: An open-source computational framework for residual stress analysis employing the Contour Method. SoftwareX, 11, article no. 100458.

Ruiz-Ramos, Javier; Marino, Armando; Boardman, Carl and Suarez, Juan (2020). Continuous Forest Monitoring Using Cumulative Sums of Sentinel-1 Timeseries. Remote Sensing, 12(18) e3061.

Schlindwein, Sandro Luis and Ison, Ray L. (2020). Confronting total systemic failure? The May 2018 truckers' strike in Brazil. Systems Research and Behavioral Science, 37(1) pp. 119–127.

Schmidt-Abbey, Barbara; Reynolds, Martin and Ison, Ray (2020). Towards Systemic Evaluation in Turbulent Times – Second-order practice shift. Evaluation, 26(2) pp. 205–226.

Seaton, Richard; Jones, Allan; Pim, Dennis and Sharp, David (2020). Findings from a survey of pitch drift. Choral Directions Research Journal, 1(1) pp. 58–70.

Sharp, Helen; Lotz, Nicole; Mbayi-Kwelagobe, Letsema; Woodroffe, Mark; Rajah, Dino and Turugare, Ranganai (2020). Socio-cultural factors and capacity building in Interaction Design: results of a video diary study in Botswana. International Journal of Human-Computer Studies, 135, article no. 102375.

Simm, T. H.; Das, Y. B.; Forsey, A. N.; Gungor, S.; Fitzpatrick, M. E.; Prakash, D. G. L.; Moat, R. J.; Birosca, S.; da Fonseca, J. Quinta and Perkins, K. M. (2020). The τ-plot, a multicomponent 1-D pole figure plot, to quantify the heterogeneity of plastic deformation. Materials Characterization, 160, article no. 110114.

Sinha, Madhumita; Mahapatra, Rajat; Mondal, Manhas Kumar; Krishnamurthy, Satheesh and Ghosh, Ranajit (2020). Fast response and low temperature sensing of acetone and ethanol using Al-doped ZnO microrods. Physica E: Low-dimensional Systems and Nanostructures, 118, article no. 113868.

Spedding, Christopher P.; Nuttall, William J. and Lim, Sungwoo (2020). Energy requirements of a thermally processed ISRU radiation shield for a lunar habitat. Advances in Space Research (Early Access).

Stacey, Martin; Eckert, Claudia and Hillerbrand, Rafaela (2020). Process models: plans, predictions, proclamations or prophecies? Research in Engineering Design, 31(1) pp. 83–102.

Stronach, Alex (2020). An Investigation of the Sound Field Above a Surface With Periodically-Spaced Roughness. PhD thesis The Open University.

Trzcińska, Zuzanna; Bruggeman, Marc; Ijakipour, Hanieh; Hodges, Nikolas J.; Bowen, James and Stamboulis, Artemis (2020). Polydopamine Linking Substrate for AMPs: Characterisation and Stability on Ti6Al4V. Materials, 13(17), article no. e3714.

Ulrich, Werner and Reynolds, Martin (2020). Ch. 6. Critical Systems Heuristics: The Idea and Practice of Boundary Critique. In: Reynolds, Martin and Holwell, Sue eds. Systems Approaches to Making Change: A Practical Guide. 2nd Edn. London: Open University and Springer, pp. 255–305.

van Duppen, Jan (2020). Seeing Patterns on the Ground: Reflections on Field-based Photography. Open Arts Journal, Autumn(9) (In press).

Varagnolo, Silvia; Lee, J; Amari, H and Hatton, R. A. (2020). Selective deposition of silver and copper films by condensation coefficient modulation. Materials Horizons, 7(1), article no. 143.

Wise, Freya (2020). Fieldwork is fun. The Open University.

Wise, Freya (2020). Reducing carbon emissions from residential heritage buildings while retaining their heritage values. The Open University.

Zamenopoulos, Theodore and Alexiou, Katerina (2020). Collective Design Anticipation. Futures, 120, article no. 102563.

Zhou, Wei; Moncaster, Alice; Reiner, David M. and Guthrie, Peter (2020). Developing a generic System Dynamics model for building stock transformation towards energy efficiency and low-carbon development. Energy and Buildings, 224, article no. 110246.

Zhou, Wei; O'Neill, Eoghan; Moncaster, Alice; Reiner, David and Guthrie, Peter (2020). Forecasting urban residential stock turnover dynamics using system dynamics and Bayesian model averaging. Applied Energy, 275, article no. 115388.

Zhuk, Siarhei; Wong, Terence Kin Shun; Petrović, Miloš; Kymakis, Emmanuel; Hadke, Shreyash Sudhakar; Lie, Stener; Wong, Lydia Helena; Sonar, Prashant; Dey, Avishek; Krishnamurthy, Satheesh and Dalapati, Goutam Kumar (2020). Solution Processed Pure Sulfide CZCTS Solar Cells with Efficiency 10.8% using Ultra-Thin CuO Intermediate Layer. Solar RRL (Early access).

Zieliński, Tomasz G.; Venegas, Rodolfo; Perrot, Camille; Červenka, Milan; Chevillotte, Fabien and Attenborough, Keith (2020). Benchmarks for microstructure-based modelling of sound absorbing rigid-frame porous media. Journal of Sound and Vibration (Early Access).

2019To Top

Nuttall, William J.; Gibson, David V.; Trzmielak, Dariusz and Ibarra-Yunez, Alejandro eds. (2019). Energy and Mobility in Smart Cities: International perspectives on innovation. London: ICE Publishing.

Alexiou, Katerina and Zamenopoulos, Theodore (2019). Methods for researching and building capacity in codesign among non-experts. In: International Association of Societies of Design Research Conference 2019, 2-5 Sep 2019, Manchester.

Ali, Haider; Ghadbeigi, Hassan; Hosseinzadeh, Foroogh; de Oliveira, Jeferson and Mumtaz, Kamran (2019). Effect of pre-emptive in situ parameter modification on residual stress distributions within selective laser-melted Ti6Al4V components. The International Journal of Advanced Manufacturing Technology, 103(9-12) pp. 4467–4479.

Anderson, Jane; Roenning, Anne and Moncaster, Alice (2019). The Reporting of End of Life and Module D Data and Scenarios in EPD for Building level Life Cycle Assessment. In: Sustainable Built Environment D-A-CH Conference 2019 (SBE19 Graz) 11–14 September 2019, Graz, Austria, IOP Science, 323, article no. 012051.

Attenborough, Keith (2019). Macro- and micro-structure designs for porous sound absorbers. Applied Acoustics, 145 pp. 349–357.

Backhaus, J.; de Carteret, R.; Damerius, L.; Huang, Y. Y.; Pfisterer, A.; Pöll, C.; Huppenbauer, M.; Rahn, E.; Reynolds, M. and Wallimann-Helmer, I. (2019). Introduction to critical systems heuristics. In: Paschke, M. and Dahinden, M. eds. Applying Collective Inquiry. Engaging in the science-policy dialogue (Workbook 8). Zurich: Zurich-Basel Plant Science Center, pp. 42–45.

Bauer, Dustin; Ashton, Thomas E.; Groves, Alexandra R.; Dey, Avishek; Krishnamurthy, Satheesh; Matsumi, Noriyoshi and Darr, Jawwad A. (2019). Continuous Hydrothermal Synthesis of Metal Germanates (M2GeO4 ; M = Co, Mn, Zn) for High Capacity Negative Electrodes in Li‐ion Batteries. Energy Technology, 8(1), article no. 1900692.

Behara, Amar Kumar; McKay, Alison; Earl, Christopher F.; Chau, Hau Hing; Robinson, Mark A.; de Pennington, Alan and Hogg, David C. (2019). Sharing design definitions across product life cycles. Research in Engineering Design, 30(3) pp. 339–361.

Bell, Simon (2019). Fake News, Paradigm of Fear & Sustainability: Research Report on Climate Fear(s). International Journal of Fear Studies, 1(1) pp. 91–107.

Bell, Simon; Berg, Tessa and Steve, Morse (2019). Towards an Understanding of Rich Picture Interpretation. Systemic Practice and Action Research, 32(6) pp. 601–614.

Bell, Simon; Collins, Kevin and Cutting, Charles (2019). M-World, S-World: Achieving wisdom in online groups. Milton Keynes: Open University.

Berry, David L.; Taherzadeh, Shahram and Attenborough, Keith (2019). Acoustic surface wave generation over rigid cylinder arrays on a rigid plane. The Journal of the Acoustical Society of America, 146(4) pp. 2137–2144.

Bilbao, Bibiana; Mistry, Jayalaxshmi; Millán, Adriana and Berardi, Andrea (2019). Sharing Multiple Perspectives on Burning: Towards a Participatory and Intercultural Fire Management Policy in Venezuela, Brazil, and Guyana. Fire, 2(3), article no. 39.

Bowen, D. Keith; Buys, Kurijn; Dart, Mathew and Sharp, David (2019). Assessing the sound of a woodwind instrument that cannot be played. Applied Acoustics, 143 pp. 84–99.

Bowen, James and Cheneler, David (2019). The stability and degradation of PECVD fluoropolymer nanofilms. Polymer Degradation and Stability, 160 pp. 203–209.

Bowers, Lisa Jane (2019). Touching creativity; a review and early pilot test of haptic tooling to support design practice, within a distance learning curriculum. Open Learning: The Journal of Open, Distance and e-Learning, 34(1) pp. 6–18.

Burnley, Stephen; Wagland, Stuart and Longhurst, Phil (2019). Using Life Cycle Assessment in environmental engineering education. Higher Education Pedagogies, 4(1) pp. 64–79.

Burnley, Stephen John (2019). A life cycle assessment of energy from waste and recycling in a post-carbon future. Detritus, 05 pp. 150–162.

Caird, S. and Roy, R. (2019). Sustainable Higher Education Systems. In: Leal Filho, W. ed. Encyclopaedia of Sustainability and Higher Education. Springer, Cham.

Caird, S. P. (2019). Measurement and Evaluation of Smart City Outcomes for Smarter Governance. In: Nuttall, W.; Gibson, D.; Ibarra-Yunez, A. and Trzmielak, D. eds. Energy and Mobility in Smart Cities. Institution of Civil Engineers Publishing, UK, 167-185 (In Press).

Caird, Sally P. and Hallett, Stephen H. (2019). Towards evaluation design for smart city development. Journal of Urban Design, 24(2) pp. 188–209.

Campbell, Anne; Gallen, Anne-Marie; Jones, Mark H. and Walshe, Ann (2019). The perceptions of STEM Tutors on the role of tutorials in distance learning. Open Learning: The Journal of Open, Distance and e-learning, 34(1) pp. 89–102.

Catulli, Maurizio (2019). An Investigation into the Social and Cultural Dynamics that Shape Product Service Systems Consumption. PhD thesis The Open University.

Chapman, S. C.; Watkins, Nicholas and Stainforth, D. A. (2019). Warming trends in summer heatwaves. Geophysical Research Letters, 46(3) pp. 1634–1640.

Chen, BingJin; Lourembam, James; Goolaup, Sarjoosing and Lim, Sze Ter (2019). Field-free spin-orbit torque switching of a perpendicular ferromagnet with Dzyaloshinskii-Moriya interaction. Applied Physics Letters, 114(2), article no. 022401.

Cook, Matthew (2019). [Book review] Inside smart cities: place, politics and urban environment. Local Environment, 24(6) pp. 554–555.

Cook, Matthew; Horne, Ralph; Potter, Stephen and Valdez, Alan-Miguel (2019). Exploring the epistemic politics of urban niche experiments. In: Jensen, Jens Stissing; Cashmore, Matthew and Späth, Philipp eds. The Politics of Urban Sustainability Transitions: Knowledge, Power and Governance. Abingdon, Oxon: Routledge, pp. 125–147.

Cross, Nigel (2019). Editorial: Design as a discipline. Design Studies, 65 pp. 1–5.

Dey, Avishek; Lopez, Arlene; Filipič, Gregor; Jayan, Aditya; Nordlund, Dennis; Koehne, Jessica; Krishnamurthy, Satheesh; Gandhiraman, Ram P. and Meyyappan, M. (2019). Plasma jet based in situ reduction of copper oxide in direct write printing. Journal of Vacuum Science & Technology B, 37(3), article no. 031203.

Díaz-Delgado, Ricardo and Ruíz-Ramos, Javier (2019). La Teledetección en la Caracterización del Régimen de Incendios y de los Efectos Sobre la Vegetación. In: Ecología de la Regeneración de Zonas Incendiadas (García Novo, Francisco; Casal, Mercedes and Pausas, Juli G. eds.), Academia de Ciencias Sociales y del Medio Ambiente de Andalucía - ACSYMA, Sevilla, pp. 131–146.

Eckert, Claudia; Isaksson, Ola and Earl, Chris (2019). Design Margins: A hidden issue in industry. Design Science, 5, article no. e9.

Eckert, Claudia; Isaksson, Ola; Hallstedt, Sophie; Malmqvist, Johan; Öhrwall Rönnbäck, Anna and Panarotto, Massimo (2019). Industry Trends to 2040. In: Proceedings of the Design Society: International Conference on Engineering Design, 1(1) pp. 2121–2128.

Elliott, David (2019). Renewable energy in the UK: past, present and future. Energy Climate and Enviroment. Palgrave.

Ferguson, Rebecca; Coughlan, Tim; Egelandsdal, Kjetil; Gaved, Mark; Herodotou, Christothea; Hillaire, Garron; Jones, Derek; Jowers, Iestyn; Kukulska-Hulme, Agnes; McAndrew, Patrick; Misiejuk, Kamila; Ness, Ingun Johanna; Rienties, Bart; Scanlon, Eileen; Sharples, Mike; Wasson, Barbara; Weller, Martin and Whitelock, Denise (2019). Innovating Pedagogy 2019: Open University Innovation Report 7. The Open University, Milton Keynes.

Fitton, Sarah L. and Moncaster, Alice M. (2019). Arguments for a Co-production Approach to Community Flood Protection. Proceedings of the Institution of Civil Engineers - Engineering Sustainability, 172(7) pp. 335–344.

Foster, Natalie; Ison, Ray; Blackmore, Chris and Collins, Kevin (2019). Revisiting deliberative policy analysis through systemic co-inquiry: some experiences from the implementation of the Water Framework Directive in England. Policy Studies, 40 pp. 510–533.

Frohlich, D.; Corrigan-Kavanagh, E.; Bober, M.; Yuan, H.; Sporea, R.; Le Borgne, B.; Scarles, C.; Revill, G.; van Duppen, J.; Brown, A. W. and Beynon, M. (2019). The Cornwall a-book: An Augmented Travel Guide Using Next Generation Paper. The Journal of Electronic Publishing, 22(1)

Ghosh, Paheli (2019). Engineering of Materials for Hole Transport Applications in Perovskite Solar Cells. PhD thesis The Open University.

Godden, Lee and Ison, Ray (2019). Community participation: exploring legitimacy in socio-ecological systems for environmental water governance. Australasian Journal of Water Resources, 23(1) pp. 45–57.

Grant, Andrea; Ison, Ray; Faggian, Robert and Sposito, Victor (2019). Enabling political legitimacy and conceptual integration for climate change adaptation research within an agricultural bureaucracy: a systemic inquiry. Systemic Practice and Action Research, 32(5) pp. 573–600.

Gregson, Jon; Lane, Andy and Foster, Matthew (2019). Adaptive Project Design: Early insights from working on the transformation of the Distance Education System in Myanmar. In: Pan-Commonwealth Forum 9 (PCF9), 2019, 9-12 Sep, Edinburgh.

Hannaford, Jamie; Collins, Kevin; Haines, Sophie and Barker, Lucy (2019). Enhancing drought monitoring and early warning for the UK through stakeholder co-enquiries. Weather, Climate, and Society, 11(1) pp. 49–63.

Harrison, Laura; Jowers, Iestyn and Earl, Christopher (2019). Defining Rules for Kinematic Shapes with Variable Spatial Relations. In: Computer-Aided Architectural Design. "Hello, Culture" (Lee, Ji-Hyun ed.), Communications in Computer and Information Science, Springer, Singapore, pp. 444–458.

Herman, Clem; Gracia, Rosaria; MacNiven, Lesley; Clark, Bernie and Doyle, Geraldine (2019). Using a Blended Learning Approach to support Women returning to STEM. Open Learning: The Journal of Open, Distance and e-Learning, 34(1) pp. 40–60.

Ho, Pin; Tan, Anthony K.C.; Goolaup, S.; Gonzalez Oyarce, A.L.; Raju, M.; Huang, L.S.; Soumyanarayanan, Anjan and Panagopoulos, C. (2019). Geometrically Tailored Skyrmions at Zero Magnetic Field in Multilayered Nanostructures. Physical Review Applied, 11(2), article no. 024064.

Ibarra-Yunez, Alejandro; Nuttall, William; Gibson, David and Trzmielak, Dariusz (2019). Conclusions. In: Nuttall, William J; Gibson, David V; Trzmielak, Dariusz and Ibarra-Yunez, Alejandro eds. Energy and Mobility in Smart Cities. ICE Publishing, pp. 231–235.

Inyang, Adijat Omuwumi; Abdalrahman, Tamer; Bezuidenhout, Deon; Bowen, James and Vaughan, Christopher Leonard (2019). Suitability of developed composite materials for meniscal replacement: mechanical, friction and wear evaluation. Journal of the Mechanical Behavior of Biomedical Materials, 89 pp. 217–226.

Isaksson, Ola; Eckert, Claudia; Borgue, Olivia; Hellstedt, Sophie; Hein, Andreas Makoto; Gericke, Kilian; Panarotto, Massimo; Reich, Yoram and hrwall Rönnbäck, Anna (2019). Perspectives on innovation: The role of engineering design. In: International Conference on Engineering Design (ICED'19), 5-8 Aug 2019, Delft, Holland.

Ison, Ray (2019). Towards cyber-systemic thinking in practice. World Futures, 75(1-2) pp. 5–16.

Ison, Ray and Straw, Ed (2019). Systemic 'biodiversity' governing. In: ‘Seeds of change: provocations for a new research agenda’, Biodiversity Revisited Symposium Conference Proceedings (Wyborn, C.; Kalas, N. and Rust, N. eds.), 11-13 Sep 2019, Vienna, Austria, pp. 80–83.

Jagustović, Renata; Zougmoré, Robert B.; Kessler, Aad; Ritsema, Coen J.; Keesstra, Saskia and Reynolds, Martin (2019). Contribution of systems thinking and complex adaptive system attributes to sustainable food production: Example from a climate-smart village. Agricultural Systems, 171 pp. 65–75.

Jazaeri, Hedieh; Bouchard, P. John; Hutchings, Michael T.; Spindler, Mike W.; Mamun, Abdullah A. and Heenan, Richard K. (2019). An Investigation into Creep Cavity Development in 316H Stainless Steel. Metals, 9(3), article no. 318.

Jones, Darren Anthony and Eckert, Claudia (2019). Empowering Decision Makers to Avoid the Oversizing of Building Service Systems. In: Proceedings of the Design Society: International Conference on Engineering Design, Cambridge University Press, 1(1) pp. 1135–1144.

Jowers, Iestyn; Earl, Chris and Stiny, George (2019). Shapes, structures and shape grammar implementation. Computer-Aided Design, 111 pp. 80–92.

Judt, David; Lawson, Craig and Lockett, Helen (2019). Experimental investigation into aircraft system manual assembly performance under varying structural component orientations. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture (Early Access).

Knight, Andrew T.; Cook, Carly N.; Redford, Kent H.; Biggs, Duan; Romero, Claudia; Ortega‑Argueta, Alejandro; Norman, Cameron D.; Parsons, Beverley; Reynolds, Martin; Eoyang, Glenda and Keene, Matt (2019). Improving conservation practice with principles and tools from systems thinking and evaluation. Sustainability Science, 14(6) pp. 1531–1548.

Lane, Andy (2019). The impact of technology on the teaching and assessment of 'systems' diagrams in two online environmental management modules. Open Learning: The Journal of Open, Distance and e-learning, 34(1) pp. 61–77.

Lane, Andy and Fawssett, Susan (2019). Building employability into a traditional curriculum: partnerships and frameworks to help transform distance education curricula in Myanmar. In: Pan-Commonwealth Forum 9 (PCF9), 2019, 9-12 Sep, Edinburgh.

Lane, Andy and Gregson, Jon (2019). Fostering innovations in pedagogical practices: transforming distance education through a professional development programme using OERs. In: Pan Commonwealth Forum 9 (PCF9), 9-12 Sep 2019, Edinburgh, Scotland.

Langendahl, Per-Anders; Roby, Helen; Potter, Stephen and Cook, Matthew (2019). Smoothing peaks and troughs: Intermediary practices to promote demand side response in smart grids. Energy Research and Social Science, 58, article no. 101277.

Lee, Jaemin; Walker, Marc; Varagnolo, Silvia; Huband, Steven and Hatton, Ross A. (2019). Stabilizing Silver Window Electrodes for Organic Photovoltaics Using a Mercaptosilane Monolayer. ACS Applied Energy Materials, 2(7) pp. 5198–5205.

Li, Shichun; Limbach, René; Longley, Louis; Shirzadi, Amir A.; Walmsley, John C.; Johnstone, Duncan N.; Midgley, Paul A.; Wondraczek, Lothar and Bennett, Thomas D. (2019). Mechanical Properties and Processing Techniques of Bulk Metal–Organic Framework Glasses. Journal of the American Chemical Society, 141(2) pp. 1027–1034.

Lim, Sungwoo; Jiang, Yachen; Morse, Andrew; Anand, Mahesh; Bowen, James and Holland, Andrew (2019). Microwave heating experiment of lunar simulant (JSC-1A) using a bespoke industrial microwave apparatus. In: European Lunar Symposium (ELS) 2019, 21-23 May 2019, Manchester, United Kingdom.

Lister, Katharine; McPherson, Elaine; Coughlan, Tim; Gallen, Anne-Marie and Pearson, Victoria (2019). Towards Inclusive Language: Exploring student-led approaches to talking about disability-related study needs. In: Proceedings of the 12th annual International Conference of Education, Research and Innovation (ICERI 2019), IATED pp. 1444–1453.

Liu, Yan; Eckert, Claudia; Yannou-Le Bris, Gwenola and Petit, Gaëlle (2019). A fuzzy decision tool to evaluate the sustainable performance of suppliers in an agrifood value chain. Computers & Industrial Engineering, 127 pp. 196–212.

Lotz, Nicole; Jones, Derek and Holden, Georgina (2019). OpenDesignStudio: virtual studio development over a decade. In: Proceedings of the DRS LearnXdesign Conference 2019, 9-12 Jul 2019, Ankara.

Lotz, Nicole; Thomas, Briony; Fernández Cárdenas, Juan Manuel; Reynaga Peña, Cristina; Díaz de León Lastras, Alejandra; Cortes Capetillo, Azael; González Nieto, Noe; Santamaría-Cid de León, David; López, Fabio; Machado, Rafa and Hayhoe, Simon (2019). Co-creating FabLab La Campana: Empowering a marginalised community in the North of Mexico. In: IASDR 2019 The International Association of Societies of Design Research (Evans, Martyn; Saw, Annie; Cooper, Rachel and Hoo Na, Jea eds.), 2-5 Sep 2019, Manchester.

Luck, Rachael (2019). Design research, architectural research, architectural design research: an argument on disciplinarity and identity. Design Studies, 65 pp. 152–166.

MacKay, A.; Hau Hing, C.; Earl, C. F.; Behera, A. K.; de Pennington, A. and Hogg, D. C. (2019). A lattice-based approach for navigating design configuration spaces. Advanced Engineering Informatics, 42, article no. 100928.

Madhavi, Madhu and Nuttall, William (2019). Coal in the 21st Century: a climate of change and uncertainty. Proceedings of the Institution of Civil Engineers – Energy, 172(2) pp. 46–63.

Maier, Jakob F.; Eckert, Claudia and Clarkson, P. John (2019). Experimental investigation of the implications of model granularity for design process simulation. Journal of Mechanical Design, 147(7), article no. 071101.

Malmqvist, Tove; Moncaster, Alice; Rasmussen, Freja and Birgisdottir, Harpa (2019). Circularity in the built environment – a call for a paradigm shift. In: Brandão, M; Lazarevic, D and Finnveden, G eds. Handbook of the Circular Economy. Edward Elgar Publishing Ltd, (In Press).

Mamun, A. A.; Moat, R. J.; Kelleher, J. and Bouchard, P. J. (2019). The effect of cyclic-loading generated intergranular strains on the creep deformation of a polycrystalline material. Materialia (Early Access).

Martin, Keith; Cupples, Andrew and Taherzadeh, Shahram (2019). Learning advanced engineering online: from distance delivery to online learning of finite element analysis. European Journal of Engineering Education, 45(3) pp. 457–472.

Matthew, George; Nuttall, William; Mestel, Benjamin and Dooley, Laurence (2019). Low Carbon Futures: confronting electricity challenges on island systems. Technological Forecasting and Social Change, 147 pp. 36–50.

McPherson, E.; Lister, K.; Pearson, V. K.; Colwell, C.; Gallen, A. M. and Collins, T. (2019). Embedding and Sustaining Inclusive Practices in STEM. In: 13th International Technology, Education and Development Conference, 11-13 Mar 2019, Valencia, Spain, pp. 2717–2722.

McPherson, Elaine; Collins, Trevor and Gallen, Anne-Marie (2019). Enabling inclusive group work. In: Proceedings of the 12th annual International Conference of Education, Research and Innovation (ICERI 2019), IATED (In Press).

Medina-Juárez, Israel; Araujo de Oliveira, Jeferson; Moat, Richard J. and García-Pastor, Francisco (2019). On the Accuracy of Finite Element Models Predicting Residual Stresses in Quenched Stainless Steel. Metals, 9(12), article no. 1308.

Michel, Florent; Lockett, Helen; Ding, Jialuo; Martina, Filomeno; Marinelli, Gianrocco and Williams, Stewart (2019). A modular path planning solution for Wire + Arc Additive Manufacturing. Robotics and Computer-Integrated Manufacturing, 60 pp. 1–11.

Mirzaee-Sisan, Ali; Bouchard, P. John and Hosseinzadeh, Foroogh (2019). Standardisation on Measurement and Interpretation of Residual Stress Data. In: ASME 2019 38th International Conference on Ocean, Offshore and Arctic Engineering, American Society of Mechanical Engineers, 4.

Mitchell, Philippa; Tommasone, Stefano; Angioletti-Uberti, Stefano; Bowen, James and Mendes, Paula M (2019). Precise generation of selective surface-confined glycoprotein recognition sites. ACS Applied Bio Materials, 2(6) pp. 2617–2623.

Moncaster, Alice and Morris, Carol (2019). Editorial: Gender and Intersectionality in Engineering. International Journal of Gender, Science and Technology, 11(1) pp. 1–9.

Moncaster, Alice; Rasmussen, Freja; Malmqvist, Tove; Houlihan Wiberg, Aoife and Birgisdottir, Harpa (2019). Widening understanding of low embodied impact buildings: results and recommendations from 80 multi-national quantitative and qualitative case studies. Journal of Cleaner Production, 235 pp. 378–393.

Morales Pachon, Andres; Spear, Roger; Ngoasong, Michael and Sacchetti, Silvia (2019). Buen Vivir as an Innovative Development Model. In: Banerjee, Swati; Carney, Stephen and Hulgard, Lars eds. People-Centered Social Innovation: Global Perspectives on an Emerging Paradigm. New York: Routledge.

Nagabooshanam, Shalini; Roy, Souradeep; Mathur, Ashish; Mukherjee, Irani; Krishnamurthy, Satheesh and Bharadwaj, Lalit (2019). Electrochemical micro analytical device interfaced with portable potentiostat for rapid detection of chlorpyrifos using acetylcholinesterase conjugated metal organic framework using Internet of things. Scientific Reports, 9, article no. 19862.

Nasir, Zaheer Ahmad; Hayes, Enda; Williams, Ben; Gladding, Toni; Rolph, Catherine; Khera, Shagun; Jackson, Simon; Bennett, Allan; Collins, Samuel; Parks, Simon; Attwood, Alexis; Kinnersley, Robert P.; Walsh, Kerry; Alcega, Sonia Garcia; Pollard, Simon J.T.; Drew, Gill; Coulon, Frederic and Tyrrel, Sean (2019). Scoping studies to establish the capability and utility of a real-time bioaerosol sensor to characterise emissions from environmental sources. Science of the Total Environment, 648 pp. 25–32.

Nguyen-Cousin, Tam; Upton, Martin and Roby, Helen (2019). Why A Change In Financial Behaviour Does Not Always Trigger A Change In Financial Well-Being? In: World Social Marketing Conference 2019, 4-5 Jun 2019, Edinburgh, Scotland.

Nuttall, W. J. (2019). Britain and the Bomb - Technology, Culture and the Cold War. Dunbeath, Caithness, Scotland: Whittles Publishing.

Nuttall, W. J.; Ashley, S. F.; Fenner, R. A.; Krishnani, P. D. and Parks, G. T. (2019). Technology Assessment of Near-Term Open-Cycle Thorium-Fuelled Nuclear Energy Systems. In: Nayak, A. K. and Sehgal, B. R. eds. Thorium - Energy for the Future: Selected Papers from ThEC15. Springer, pp. 117–124.

Nuttall, William (2019). Historic European cities and the smart future. In: Nuttall, William J; Gibson, David V; Trzmielak, Dariusz and Ibarra-Yunez, Alejandro eds. Energy and Mobility in Smart Cities. ICE Publishing, pp. 19–29.

Nuttall, William; Ibarra-Yunez, Alejandro; Trzmielak, Dariusz and Gibson, David (2019). The smart future. ICE Publishing, pp. 3–16.

Oliver, Sam J.; Mostafavi, Mahmoud; Hosseinzadeh, Foroogh and Pavier, Martyn J. (2019). Redistribution of residual stress by thermal shock in reactor pressure vessel steel clad with nickel alloy. International Journal of Pressure Vessels and Piping, 169 pp. 37–47.

Palyulin, Vladimir V; Blackburn, George; Lomholt, Michael A; Watkins, Nicholas W.; Metzler, Ralf; Klages, Rainer and Chechkin, Aleksei V (2019). First passage and first hitting times of Lévy flights and Lévy walks. New Journal of Physics, 21(10), article no. 103028.

Pearson, Victoria; Lister, Katharine; McPherson, Elaine; Gallen, Anne-Marie; Davies, Gareth; Colwell, Chetz; Bradshaw, Kate; Braithwaite, N St.J and Collins, Trevor (2019). Embedding and Sustaining Inclusive Practice to Support Disabled Students in Online and Blended Learning. Journal of Interactive Media in Education, 1, article no. 4.

Pomponi, Francesco and Moncaster, Alice (2019). BS 8001 and the built environment: a review and critique. Proceedings of the Institution of Civil Engineers - Engineering Sustainability, 172(3) pp. 111–114.

Potter, Stephen; Valdez, Alan-Miguel and Cook, Matthew (2019). Autonomous vehicles and the urban mobility ecosystem. In: Nuttall, William J; Gibson, David V; Trzmielak, Dariusz and Ibarra-Yunez, Alejandro eds. Energy and Mobility in Smart Cities. ICE Publishing, pp. 83–97.

Prikhodko, SV; Savvakin, DG; Markovsky, PE; Stasiuk, OO; Enzinger, N; Deley, F; Flipo, B; Shirzadi, AA; Davies, HM; Davies, PD; Penny, J; Bozhilov, K and Ivasishin, OM (2019). Layered Structures of Ti-6Al-4V Alloy and Metal Matrix Composites on Its Base Joint by Diffusion Bonding and Friction Welding. Microscopy and Microanalysis, 25(S2) pp. 812–813.

Psoma, S D (2019). Utilisation of microbiosensors for monitoring phenols in whisky fermentation process. In: 16th International Conference on NanoSciences and Nanotechnologies (NN19), From 2/7/2019 to 5/7/2019, Thessaloniki, Greece.

Psoma, Sotiria (2019). An aptamer-based fluorescent biosensor for insulin detection. In: Proceedings of the 2nd European Biosensor Symposium 2019, 18-21 Feb 2019, Florence, Italy, p. 220.

Qin, Rongshan (2019). Alignment of Rods and Flakes using Electric Field. Advanced Materials Letters, 10(12) pp. 899–902.

Renedo Illarregi, Erika (2019). Walking Heterotopias. In: The Design Journal, 22(sup1) pp. 2307–2312.

Renedo Illarregi, Erika; Alexiou, Katerina and Zamenopoulos, Theodore (2019). Why designing may help treat psychosis. In: International Association of Societies of Design Research Conference 2019 Proceedings.

Reynolds, Martin; Lyons-White, Joss and Knight, Andrew T. (2019). Systemic failure and the 'Iron Triangle' of conservation practice. In: ‘Seeds of change: provocations for a new research agenda’, Biodiversity Revisited Symposium Conference Proceedings (Wyborn, C.; Kalas, N. and Rust, N. eds.), 11-13 Sep 2019, Vienna, Austria, pp. 138–142.

Rolph, Catherine A.; Villa, Raffaella; Jefferson, Bruce; Brookes, Adam; Choya, Andoni; Iceton, Gregg and Hassard, Francis (2019). From full-scale biofilters to bioreactors: Engineering biological metaldehyde removal. Science of the Total Environment, 685 pp. 410–418.

Roy, Robin and Warren, James (2019). Card-based design tools: a review and analysis of 155 card decks for designers and designing. Design Studies, 63 pp. 125–154.

Samaras, Constantine; Bazilian, Morgan and Nuttall, William (2019). Energy and the Military: Leading by Example. Yale University USA.

Samaras, Constantine; Nuttall, William J. and Bazilian, Morgan (2019). Energy and the military: Convergence of security, economic, and environmental decision-making. Energy Strategy Reviews, 26, article no. 100409.

Seaton, Richard (2019). Pitch drift in 'a cappella' choral singing. PhD thesis The Open University.

Seaton, Richard; Sharp, David; Jones, Allan and Pim, Dennis (2019). Apparent asymmetry in discriminating between two closely spaced pitches. In: Proceedings of the Institute of Acoustics, 31(1) pp. 302–309.

Shirzadi, A. A.; Kozieł, T.; Cios, G. and Bała, P. (2019). Development of Auto Ejection Melt Spinning (AEMS) and its application in fabrication of cobalt-based ribbons. Journal of Materials Processing Technology pp. 377–381.

Shirzadi, Amir (2019). Modelling and design of new stainless-steel welding alloys suitable for low-deformation repairs and restoration processes. Procedia Manufacturing (In Press).

Shirzadi, Amir A. (2019). Modelling and design of new stainless-steel welding alloys suitable for low-deformation repairs and restoration processes. Procedia Manufacturing, 37 pp. 627–632.

Smith, M.C.; Muransky, O.; Xiong, Q.; Bouchard, P. J.; Mathew, J. and Austin, C. (2019). Validated prediction of weld residual stresses in austenitic steel pipe girth welds before and after thermal ageing, part 1: Mock-up manufacture, residual stress measurements, and materials characterisation. International Journal of Pressure Vessels and Piping, 172 pp. 233–250.

Smyth, Niall A.; Toparli, M. Burak; Fitzpatrick, Michael E. and Irving, Phil E. (2019). Recovery of fatigue life using laser peening on 2024‐T351 aluminium sheet containing scratch damage: The role of residual stress. Fatigue & Fracture of Engineering Materials and Structures, 42(5) pp. 1161–1174.

Spear, Roger (2019). Collective social entrepreneurship. In: De Bruin, Anne and Teasdale, Simon eds. A research agenda for social entrepreneurship. Elgar Research Agendas. Edward Elgar.

Stewart, Beverly (2019). Controlling Deformation Errors in the Contour Method for Residual Stress Measurement. PhD thesis The Open University.

Stronach, Alexander; Taherzadeh, Shahram and Attenborough, Keith (2019). An investigation of the sound field above a surface with periodic roughness. In: INTER-NOISE 2019 MADRID - 48th International Congress and Exhibition on Noise Control Engineering 2019, 16-19 Jun 2019, Madrid, Spain.

Tahera, Khadija; Wynn, David C.; Earl, Chris and Eckert, Claudia M. (2019). Testing in the incremental design and development of complex products. Research in Engineering Design, 30(2) pp. 291–316.

Terasaki, Nobuyuki; Ohashi, Touyou; Nagatomo, Yoshiyuki; Kuromitsu, Yoshirou and Shirzadi, Amir A. (2019). A new method for liquid-phase bonding of copper plates to aluminum nitride (AlN) substrates used in high-power modules. Journal of Materials Science: Materials in Electronics, 30(7) pp. 6552–6555.

Unnikrishnan, Rahul (2019). Characterization of Inelastic Strain in Type 316H Austenitic Stainless Steel using Electron Backscatter Diffraction. PhD thesis The Open University.

Valdez, A.; Potter, S. and Cook, M. (2019). The imagined electric vehicle user: Insights from pioneering and prospective buyers in Milton Keynes, United Kingdom. Transportation Research Part D: Transport and Environment, 71 pp. 85–95.

van Duppen, Jan (2019). Picturing Diversions: The Work/Play of Walking on London Pavements. Roadsides, 2 pp. 51–60.

Watkins, N. W. (2019). Mandelbrot's stochastic time series models. Earth and Space Science, 6(11) pp. 2044–2056.

Wise, F.; Moncaster, A.; Jones, D. and Dewberry, E. (2019). Considering embodied energy and carbon in heritage buildings – a review. IOP Conference Series: Earth and Environmental Science, 329, article no. 012002.

Wismayer, Kurt; Mehrban, Nazia; Bowen, James and Birchall, Martin A (2019). Improving cellular migration in tissue-engineered laryngeal scaffolds. Journal of Laryngology & Otology, 133(2) pp. 135–148.

Wynn, David. C; Eckert, Claudia and Clarkson, P. John (2019). Research into the design and development process: some themes and an overview of the special issue. Research in Engineering Design, 30(2) pp. 157–160.

Xanthopoulou, Galina; Thoda, Olga; Boukos, Nikos; Krishnamurthy, Satheesh; Dey, Avishek; Roslyakov, Sergey; Vekinis, George; Chroneos, Alexandros and Levashov, Evgeny (2019). Effects of Precursor Concentration in Solvent and Nanomaterials Room Temperature Aging on the Growth Morphology and Surface Characteristics of Ni–NiO Nanocatalysts Produced by Dendrites Combustion during SCS. Applied Sciences, 9(22) e4925.

Xue, Jilin; Bouchard, John; Chen, Xuedong; Fan, Zhichao and Zhou, Yu (2019). Anisotropic elastic constants calculation of stainless steel cladded layers of pressure vessel steel plate. International Journal of Pressure Vessels and Piping, 177, article no. 103991.

Zamenopoulos, Theodore; Lam, Busayawan; Alexiou, Katerina; Kelemen, Mihaela; de Sousa, Sophia; Moffat, Sue and Phillips, Martin (2019). Types, obstacles and sources of empowerment in co-design: the role of shared material objects and processes. CoDesign: International Journal of CoCreation in Design and the Arts (Early Access).

Zhao, Zuochao (2019). Mesoscopic Modelling and Simulation of Fluid Phenomena in Material Processing. PhD thesis The Open University.

Zhao, Zuochao; Moat, Richard and Qin, Rongshan (2019). Mesoscale modelling of miscible and immiscible multicomponent fluids. Scientific reports, 9, article no. 8277 (2019).

Zhou, Wei; Moncaster, Alice; Reiner, David and Guthrie, Peter (2019). Estimating Lifetimes and Stock Turnover Dynamics of Urban Residential Buildings in China. Sustainability, 11(13), article no. 3720.

Zhou, Wei; Moncaster, Alice; Reiner, David M. and Guthrie, Peter (2019). Estimating Lifetimes and Stock Turnover Dynamics of Urban Residential Buildings in China. Energy Policy Research Group, University of Cambridge, Cambridge.

Zhou, Wei; O’Neill, Eoghan; Moncaster, Alice; Reiner, David M. and Guthrie, Peter (2019). Applying Bayesian Model Averaging to Characterise Urban Residential Stock Turnover Dynamics. Energy Policy Research Group, University of Cambridge, Cambridge.

2018To Top

Bell, Simon and Morse, Stephen eds. (2018). Routledge Handbook of Sustainability Indicators. Routledge International Handbooks. London: Routledge.

Pomponi, Francesco; De Wolf, Catherine and Moncaster, Alice eds. (2018). Embodied Carbon in Buildings: Measurement, Management, and Mitigation. Springer.

Abburi Venkata, K.; Khayatzadeh, S.; Achouri, A.; de Oliveira, J. Araujo; Forsey, A. N.; Gungor, S.; Bouchard, P. J. and Truman, C. E. (2018). Examining Stress Relaxation in a Dissimilar Metal Weld Subjected to Postweld Heat Treatment. Materials Performance and Characterization, 7(4) pp. 675–692.

Achouri, Anas (2018). Advances in the Contour Method for Residual Stress Measurement. PhD thesis The Open University.

Akbarian, Shima; Zarei-Hanzaki, Abbas; Abedi, Hamid Reza; Unnikrishnan, Rahul and Moat, Richard (2018). Substructure Development and Deformation Twinning Stimulation through Regulating the Processing Path during Multi-Axial Forging of Twinning Induced Plasticity Steel. Advanced Engineering Materials, 20(11), article no. 1800453.

Albers, A.; Bursac, N.; Eckert, C. M.; Walter, B.; Wilmson, M. and Heimicke, J. (2018). Agile Method Development: A Live-Lab Case Study on Product Properties for Process Planning. In: DS92: Proceedings of the DESIGN 2018 15th International Design Conference (Marjanović, D; Štorga, M.; Škec, S.; Bojčetić, N. and Pavković, N. eds.), pp. 713–724.

Attenborough, Keith (2018). Microstructures for lowering the quarter wavelength resonance frequency of a hard-backed rigid-porous layer. Applied Acoustics, 130 pp. 188–194.

Baker, Hannah and Moncaster, Alice (2018). Adaptation and Demolition in a Masterplan Context. In: Wilkinson, Sara J. and Remøy, Hilde eds. Building Urban Resilience through Change of Use. John Wiley & Sons, pp. 57–81.

Barrett, Christopher L.; Johnson, Jeffrey and Marathe, Madhav (2018). High Performance Synthetic Information Environments : An integrating architecture in the age of pervasive data and computing. ACM Ubiquity, 2018(3) pp. 1–11.

Bell, Simon; Benatti, Francesca; Edwards, Neil R.; Laney, Robin; Morse, David R.; Piccolo, Lara and Zanetti, Oliver (2018). Smart Cities and M3: Rapid Research, Meaningful Metrics and Co-Design. Systemic Practice and Action Research, 31(1) pp. 27–53.

Bell, Simon and Morse, Stephen (2018). Sustainability Indicators Past and Present: What Next? Sustainability, 10(5), article no. 1688.

Bell, Simon and Morse, Stephen (2018). Indicators and Post Truth. In: Bell, Simon and Morse, Stephen eds. Routledge Handbook of Sustainability Indicators and Indices. London, UK: Routledge, pp. 1–18.

Bell, Simon and Morse, Stephen (2018). Participatory Approaches for the Development and Evaluation of Sustainability Indicators. In: Bell, Simon and Morse, Stephen eds. Routledge Handbook of Sustainability Indicators and Indices. Routledge International Handbooks. London: Routledge.

Bell, Simon and Morse, Stephen (2018). What Next? In: Bell, Simon and Morse, Stephen eds. Routledge Handbook of Sustainability Indicators and Indices. Routledge International Handbooks. London: Routledge, pp. 543–556.

Bellchambers, Philip; Lee, Jaemin; Varagnolo, Silvia; Amari, Houari; Walker, Marc and Hatton, Ross A. (2018). Elucidating the Exceptional Passivation Effect of 0.8 nm Evaporated Aluminium on Transparent Copper Films. Frontiers in Materials, 5, article no. 71.

Benghalia, G.; Rahimi, S.; Wood, J.; Coules, H. and Paddea, S. (2018). Multiscale Measurements of Residual Stress in a Low-Alloy Carbon Steel Weld Clad with IN625 Superalloy. Materials Performance and Characterization, 7(4) pp. 606–629.

Bettley, Alison and Horrocks, Ivan (2018). Emergent versus Planned Assessment and Tuition Strategies for Online Postgraduate Teaching of Technology and Innovation Management at the Open University, UK. In: Khare, Anshuman and Hurst, Deborah eds. On the Line: Business Education in the Digital Age. Geneva: Springer, pp. 55–73.

Blackmore, Chris; Sriskandarajah, Nadarajah and Ison, Ray (2018). Developing Learning Systems For Addressing Uncertainty In Farming, Food And Environment: What Has Changed In Recent Times? International Journal of Agricultural Extension 03-15.

Bouckaert, Frederick; Wei, Yongping; Hussey, Karen; Pittock, Jamie and Ison, Ray (2018). Improving the role of River Basin Organisations in sustainable river basin governance by linking social institutional capacity and basin biophysical capacity. Current Opinion in Environmental Sustainability, 33 pp. 70–79.

Bowen, Keith; Buys, Kurijn and Sharp, David (2018). On The Accuracy Of Calculation Of The Impedance Spectra Of Woodwind Instruments. In: Measurements and modelling of musical instruments and performance spaces, 22 Oct 2018, St Cecilia's Hall, Edinburgh.

Burnley, Stephen (2018). A Life Cycle Assessment Of Energy From Waste And Recycling In A Post Carbon Future. In: 7th International Symposium on Energy from Biomass and Waste, 15-18 Oct 2018, Venice.

Burnley, Stephen and Coleman, Terry (2018). The environmental and financial benefits of recovering plastics from residual municipal waste before energy recovery. Waste Management, 79 pp. 79–86.

Buys, Kurijn (2018). Development and Evaluation of a Hybrid Wind Instrument. PhD thesis The Open University.

Caird, S. and Roy, R. (2018). Blended Learning and Sustainable Development. In: Leal Filho, W. ed. Encyclopaedia of Sustainability and Higher Education. Springer, Cham.

Caird, Sally (2018). City approaches to smart city evaluation and reporting: case studies in the United Kingdom. Urban Research and Practice, 11(2) pp. 159–179.

Carugo, David; Hayatleh, K.; Lidgey, F.J. and Sharp, David (2018). Sensor Grid Design For High Resolution 3D Acoustic Measurements Of Musical Instruments. In: Measurements and modelling of musical instruments and performance spaces, 22 Oct 2018, St Cecilia's Hall, Edinburgh.

Chandler, Michael R.; Fauchille, Anne‐Laure; Kim, Ho Kyeom; Ma, Lin; Mecklenburgh, Julian; Rizzo, Roberto; Mostafavi, Mahmoud; Marussi, Sebastian; Atwood, Robert; May, Steven; Azeem, Mohammed; Rutter, Ernie; Taylor, Kevin and Lee, Peter (2018). Correlative Optical and X‐Ray Imaging of Strain Evolution During Double-Torsion Fracture Toughness Measurements in Shale. JGR Solid Earth, 123(12) 10,517-10,533.

Chapman, S. C.; Lang, P. T.; Dendy, R. O.; Giannone, L.; Watkins, N. W. and ASDEX Upgrade Team (2018). Control system-plasma synchronization and naturally occurring edge localized modes in a tokamak. Physics of Plasmas, 25(6), article no. 062511.

Chapman, S. C.; Watkins, N. W. and Tindale, E. (2018). Reproducible aspects of the climate of space weather over the last five solar cycles. Space Weather, 16(8) pp. 1128–1142.

Chau, Hau Hing; McKay, Alison; Earl, Christopher F.; Behera, Amar Kumar and de Pennington, Alan (2018). Exploiting lattice structures in shape grammar implementations. Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 32(2) pp. 147–161.

Cook, Matthew (2018). Product Service System Innovation in the Smart City. International Journal of Entrepreneurship and Innovation, 19(1) pp. 46–55.

Cooke, Helen; Lane, Andrew and Taylor, Peter (2018). Open by Degrees: A Case of Flexibility or Personalization? In: Stevenson, Carolyn ed. Enhancing Education Through Open Degree Programs and Prior Learning Assessment. IGI Global, pp. 128–148.

Cox, Elizabeth; Ruge, Luisa; Mancini, Clara and Luck, Rachael (2018). User Centered Design Approaches to Measuring Canine Behavior: Tail Wagging as a Measure of User Experience. In: ACI2018 Proceedings of the Fifth International Conference on Animal-Computer Interaction, ACM International Conference Proceeding Series, ACM Digital Library, article no. 1.

Crommentuijn-Marsh, Philippa Jane (2018). Understanding Consumer Behaviour Regarding the Sustainable Consumption of Clothing. PhD thesis The Open University.

Cross, Nigel (2018). A brief history of the Design Thinking Research Symposium series. Design Studies, 57 pp. 160–164.

Cross, Nigel (2018). Developing design as a discipline. Journal of Engineering Design, 29(12) pp. 691–708.

Cross, Nigel (2018). Expertise in Professional Design. In: Ericsson, K. Anders; Hoffman, Robert R.; Kozbelt, Aaron and Williams, A. Mark eds. Cambridge Handbook of Expertise and Expert Performance (2nd ed). Cambridge: Cambridge University Press, pp. 372–388.

Das, Yadunandan B.; Forsey, Alexander N.; Kelleher, Joe; Kabra, Saurabh; Fitzpatrick, Michael E.; Simm, Thomas H.; Gungor, Salih and Moat, Richard J. (2018). The influence of temperature on deformation-induced martensitic transformation in 301 stainless steel. Materials Science and Technology, 34(17) pp. 2114–2125.

Davaasuren, Narangerel; Marino, Armando; Ackermann, Nicolas; Alparone, Matteo; Nunziata, Ferdinando and Boardman, Carl (2018). Detecting microplastics pollution in world oceans using SAR remote sensing. In: IGARSS 2018: IEEE International Geoscience and Remote Sensing Symposium, 22-27 Jul 2018, Valencia, Spain.

Davaasuren, Narangerel; Marino, Armando; Boardman, Carl; Ackermann, Nicolas; Alparone, Matteo and Nunziata, Ferdinando (2018). Exploring The Use Of SAR Remote Sensing To Detect Microplastics Pollution In The Oceans. In: 5th Advances in SAR Oceanography Workshop (SeaSAR 2018) (Marino, Armando; Davaasuren, Narangerel and Boardman, Carl eds.), 7-11 May 2018, Frascati, Italy.

Dewberry, Emma (2018). Eco-literacy in Transition: the role of design ecologies in developing our capacity for radical change. In: Can Design Catalyse the Great Transition? Papers from the Transition Design Symposium 2016 (Kossoff, Gideon and Potts, Ruth eds.), The School of Design at Carnegie Mellon University, Schumacher College and the New Weather Institute. pp. 127–136.

Dey, Avishek (2018). Applications of Atmospheric Pressure Plasma in Surface Engineering. PhD thesis The Open University.

Dey, Avishek; Krishnamurthy, Satheesh; Bowen, James; Nordlund, Dennis; Meyyappan, M. and Gandhiraman, Ram P. (2018). Plasma Jet Printing and in Situ Reduction of Highly Acidic Graphene Oxide. ACS Nano, 12(6) pp. 5473–5481.

Duan, Xinjian; Glover, Andrew; Sun, Dongmei and Paddea, Sanjooram (2018). Experimental Study of the Weld Residual Stress in Manually and Mechanically Fabricated Dissimilar Metal Weld. In: Proceedings of the ASME 2018 Pressure Vessels and Piping Conference - Volume 6B: Materials and Fabrication, ASME, article no. PVP2018-84136.

Earl, Chris (2018). [Obituary] Lionel March: Sharing ideas through research. Environment and Planning B: Urban Analytics and City Science, 45(4) 598 -600.

Eckert, Claudia and Hillerbrand, Rafaela (2018). Models in Engineering Design: Generative and epistemic function of product models. In: Vermaas, Pieter and Vial, Stéphane eds. Advancements in the Philosophy of Design. Design Research Foundations. Springer, pp. 219–242.

Elliott, David and Cook, Terence (2018). Renewable Energy: from Europe to Africa. Pivot. Palgrave.

Ferrentino, Emanuele; Nunziata, Ferdinando; Migliaccio, Maurizio and Marino, Armando (2018). Multi-Polarization Methods to Detect Damages Related to Earthquakes. In: IGARSS 2018 - 2018 IEEE International Geoscience and Remote Sensing Symposium, 22-27 Jul 2018, Valencia, Spain, pp. 1938–1941.

Forsey, Alex; Das, Yadunandan; Simm, Thomas H.; Clark, Dan; Boswell, John; Gungor, Salih and Moat, Richard (2018). Mechanical Property Heterogeneity in Additively Manufactured Nickel Superalloy. Materials Science and Engineering A, 712 pp. 681–684.

Foster, Natalie; Ison, Ray; Blackmore, Chris and Collins, Kevin (2018). Partnerships for action in river catchment governance. A case study in the Irwell, UK. The Open University, Milton Keynes, UK.

Harrison, Colin and Johnson, Jeffrey (2018). Autonomous decentralised systems and society. In: Mori, Kinji and Kunifuji, Takashi eds. Autonomous Decentralized Systems and their Applications in Transport and Infrastructure. The Institution of Engineering and Technology, pp. 215–234.

Harrison, Jesse P.; Boardman, Carl; O'Callaghan, Kenneth; Delort, Anne-Marie and Song, Jim (2018). Biodegradability standards for carrier bags and plastic films in aquatic environments: a critical review. Royal Society Open Science, 5, article no. 171792.

Ison, Ray (2018). Governing the human-environment relationship: systemic practice. Current Opinion in Environmental Sustainability, 33 pp. 114–123.

Ison, Ray; Alexandra, Jason and Wallis, Phil (2018). Governing in the Anthropocene: are there cyber-systemic antidotes to the malaise of modern governance? Sustainability Science, 13(5) pp. 1209–1223.

Ison, Ray and Straw, Ed (2018). Duality, dualism, duelling and Brexit. Open Democracy, March 1st.

Ivanov, Yurii F. I; Gromov, Victor E.; Konovalov, Konovalov; Kormyshev, Vassily E.; Qin, Rongshan and Semina, Olga A (2018). Phase Composition and Defect Substructure of Strengthening Layer Surfaced on Low Alloyed Steel. Journal of Metastable and Nanocrystalline Materials, 30 pp. 28–33.

Jacob, Anais; de Oliveira, Jeferson Araujo; Mehmanparast, Ali; Hosseinzadeh, Foroogh and Berto, Filippo (2018). Should Residual Stresses Be Taken Into Account in Structural Integrity Assessment of Offshore Monopiles? In: ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering. Volume 3: Structures, Safety, and Reliability, ASME, article no. OMAE2018-78519.

Jeffries, K. K.; Zamenopoulos, T. and Green, A. J. K. (2018). Design creativity, technical execution and aesthetic appeal: a CAT with caveats (Part 2). International Journal of Design Creativity and Innovation, 6(1-2) pp. 66–79.

Johnson, Jeffrey; Fortune, Joyce and Bromley, Jane (2018). Multilevel systems and policy. In: Mitleton-Kelly, Eve; Paraskevas, Alexandros and Day, Christopher eds. Handbook of Research Methods in Complexity Science: Theory and Applications. London: Edward Elgar Publishing, pp. 363–387.

Johnson, Jeffrey and Rossi, Ruggero (2018). Dynamic Structures for Evolving Tactics and Strategies in Team Robotics. In: Proceedings of the Conference on Artificial Life and Robotics (ICAROB2018) (Jia, Yingmin; Ito, Takao and Lee, Ju-Jang eds.), ALife Robotics Corp. Ltd., Beppu, Oita, JAPAN, pp. 126–131.

Johnson, Jeffrey; Tesei, Luca; Piangerelli, Marco; Merelli, Emanuela; Paci, Riccardo; Stojanovic, Nenad; Leitão, Paulo; Barbosa, José and Amador, Marco (2018). Big Data: Business, Technology, Education, and Science. Ubiquity, 2018(July) pp. 1–13.

Jones, D. A.; Eckert, C. M. and Gericke, K. (2018). Margins Leading to Over-Capacity. In: DS92: Proceedings of the DESIGN 2018 15th International Design Conference (Marjanović, D.; Štorga, M.; Škec, S.; Bojčetić, N. and Pavković, N. eds.), The Design Society, pp. 781–792.

Jowers, Iestyn and Earl, Chris (2018). Visual Structures of Embedded Shapes. In: Lee, Ji-Hyun ed. Computational Studies on Cultural Variation and Heredity. KAIST Research Series. Springer, pp. 175–187.

Kaklamani, Georgia; Kazaryan, Diana; Bowen, James; Iacovella, Fabrice; Anastasiadis, Spiros H. and Deligeorgis, George (2018). On the electrical conductivity of alginate hydrogels. Regenerative Biomaterials, 5(5) pp. 293–301.

Lam, Busayawan; Phillips, Martin; Kelemen, Mihaela; Zamenopoulos, Theodore; Moffat, Susan and de Sousa, Sophia (2018). Design and Creative Methods as a Practice of Liminality in Community-Academic Research Projects. The Design Journal, 21(4) pp. 605–624.

Lebjioui, Safaa (2018). Investigating and Managing Design Margins throughout the Product Development Process. PhD thesis The Open University.

Lim, S.; Levin Prabhu, V.; Anand, M.; Bowen, J.; Morse, A. and Holland, A. (2018). Numerical modelling of microwave sintering of lunar simulants under near lunar atmospheric condition. In: European Lunar Symposium (ELS) 2018, 13-16 May 2018, Toulouse, France.

Lockett, Helen; Emms, Robert; Williams, Stewart; Ding, Jialuo and Martina, Filomeno (2018). The application of knowledge based engineering to design for Wire+Arc Additive Manufacture (WAAM). In: 6th Aircraft Structural Design Conference, 9-11 Oct 2018, Bristol, UK.

Lotz, Nicole; Jones, Derek and Holden, Georgy (2018). Engaging Qualities: factors affecting learner attention in online design studios. In: Proceedings of DRS2018, Design Research Society, London, pp. 2746–2764.

Luck, Rachael (2018). Participatory design in architectural practice: Changing practices in future making in uncertain times. Design Studies, 59 pp. 139–157.

Luck, Rachael (2018). Inclusive design and making in practice: Bringing bodily experience into closer contact with making. Design Studies, 54 pp. 96–119.

Luck, Rachael (2018). [Editorial] What is it that makes participation in design participatory design? Design Studies, 59 pp. 1–8.

Lyu, Peisheng; Wang, Wanlin; Long, Xukai; Zhang, Kaixuan; Gao, Erzhuo and Qin, Rongshan (2018). Study of the Effect of Mold Corner Shape on the Initial Solidification Behavior of Molten Steel Using Mold Simulator. Metallurgical and Materials Transactions B, 49(1) pp. 78–88.

Maclachlan, Lynne (2018). Making Rules, Making Tools: How Can Shape Grammar Support Creative Making? PhD thesis The Open University.

Mahmoodi, N.; Sabouri, A.; Bowen, J.; Anthony, C. J. and Mendes, P. M. (2018). Mechanical Characterization of Torsional Micropaddles Using Atomic Force Microscopy. Journal of Sensors, 2018, article no. 6160907.

Mahmoodi, Nasim; Sabouri, Aydin; Bowen, James; Anthony, Carl J and Mendes, Paula M (2018). Mechanical characterization of torsional micro-paddles using atomic force microscopy. Journal of Sensors, article no. 6160907.

Malmqvist, Tove; Nehasilova, Maria; Moncaster, Alice; Birgisdottir, Harpa; Nygaard Rasmussen, Freja and Potting, Jose (2018). Design and construction strategies for reducing embodied impacts from buildings – Case study analysis. Energy and Buildings, 166 pp. 35–47.

Marshall, Kenneth P.; Tao, Shuxia; Walker, Marc; Cook, Daniel S.; Lloyd-Hughes, James; Varagnolo, Silvia; Wijesekara, Anjana; Walker, David; Walton, Richard I. and Hatton, Ross A. (2018). Cs1−xRbxSnI3 light harvesting semiconductors for perovskite photovoltaics. Materials Chemistry Frontiers, 2(8) pp. 1515–1522.

Maru, Yiheyis Taddele; Sparrow, Ashley; Butler, James R.A.; Banerjee, Onil; Ison, Ray; Hall, Andy and Carberry, Peter (2018). Towards appropriate mainstreaming of “Theory of Change” approaches into agricultural research for development: Challenges and opportunities. Agricultural Systems, 165 pp. 344–353.

Mehrban, Nazia; Bowen, James; Tait, Angela; Darbyshire, Arnold; Virasami, Alex K.; Lowdell, Mark W. and Birchall, Martin A. (2018). Silsesquioxane polymer as a potential scaffold for laryngeal reconstruction. Materials Science and Engineering: C, 92 pp. 565–574.

Mehta, Manan; Singh, Aadesh P.; Kumar, Sandeeep; Krishnamurthy, Satheesh; Wickman, Björn and Basu, Suddhasatwa (2018). Synthesis of MoS2-TiO2 nanocomposite for enhanced photocatalytic and photoelectrochemical performance under visible light irradiation. Vacuum, 155 pp. 675–681.

Melo Zurita, Maria de Lourdes; Thomsen, Dana C.; Holbrook, Neil J.; Smith, Timothy F.; Lyth, Anna; Munro, Paul G.; de Bruin, Annemarieke; Seddaiu, Giovanna; Roggero, Pier Paolo; Baird, Julia; Plummer, Ryan; Bullock, Ryan; Collins, Kevin and Powell, Neil (2018). Global Water Governance and Climate Change: Identifying Innovative Arrangements for Adaptive Transformation. Water, 10(1), article no. 29.

Moat, R. J.; Ooi, S.; Shirzadi, A. A.; Dai, H.; Mark, A. F.; Bhadeshia, H. K. D. H. and Withers, P. J. (2018). Residual stress control of multipass welds using low transformation temperature fillers. Materials Science and Technology, 34(5) pp. 519–528.

Mohammed, D.W.; Ameen, R. B.; Sierros, K. A.; Bowen, J. and Kukureka, S. N. (2018). Twisting fatigue in multilayer films of Ag-alloy with indium tin oxide on polyethylene terephthalate for flexible electronics devices. Thin Solid Films, 645 pp. 241–252.

Moncaster, A. M.; Pomponi, F.; Symons, K. E. and Guthrie, P. M. (2018). Why method matters: temporal, spatial and physical variations in LCA and their impact on choice of structural system. Energy and Buildings, 173 pp. 389–398.

Moncaster, Alice; Birgisdottir, Harpa; Malmqvist, Tove; Nygaard Rasmussen, Freja; Houlihan Wiberg, Aoife and Soulti, Eleni (2018). Embodied Carbon Measurement, Mitigation and Management Within Europe, Drawing on a Cross-Case Analysis of 60 Building Case Studies. In: Pomponi, Francesco; De Wolf, Catherine and Moncaster, Alice eds. Embodied Carbon in Buildings: Measurement, Management, and Mitigation. Springer, pp. 443–462.

Moncaster, Alice and Dillon, Martha (2018). How gender equality can help fix the construction industry. The Conversation.

Morris, Carol and Goodyear, Alec (2018). Implementing programme reform through a radical change in assessment practice. In: Lawrence, Jenny and Ellis, Sam eds. Supporting programme leaders and programme leadership. SEDA Specials (39). London: SEDA.

Morris, Carol and Organ, Sally (2018). Changing direction: understanding and promoting mature female entry to undergraduate engineering programmes. In: SEFI Annual Conference, 17-21 Sep 2018, Copenhagen.

Morris, Carol; Organ, Sally and Goodyear, Alec (2018). Teaching in Context: Integrating Mathematical Thinking and Personal Development Planning into the Curriculum for Part-Time, Distance-Learning Engineering Students. In: Exploring the Micro, Meso and Macro: Navigating between dimensions in the digital learning landscape. Proceedings of the European Distance and E-Learning Network 2018 Annual Conference (Volungeviciene, Airina and Szűcs, András eds.), European Distance and E-Learning Network, Genoa, Italy, pp. 61–68.

Muránsky, O.; Hamelin, C.J.; Hosseinzadeh, F. and Prime, M.B. (2018). Evaluation of a self-equilibrium cutting strategy for the contour method of residual stress measurement. International Journal of Pressure Vessels and Piping, 164 pp. 22–31.

Muránsky, O.; Hosseinzadeh, F.; Hamelin, C.J.; Traore, Y. and Bendeich, P.J. (2018). Investigating optimal cutting configurations for the contour method of weld residual stress measurement. International Journal of Pressure Vessels and Piping, 164 pp. 55–67.

Nasir, Zaheer Ahmad; Rolph, Catherine; Collins, Samuel; Stevenson, David; Gladding, Toni L.; Hayes, Enda; Williams, Ben; Khera, Shagun; Jackson, Simon; Bennett, Allan; Parks, Simon; Kinnersley, Robert P.; Walsh, Kerry; Pollard, Simon J.T.; Drew, Gillian; Alcega, Sonia Garcia; Coulon, Frederic and Tyrrel, Sean (2018). A Controlled Study on the Characterisation of Bioaerosols Emissions from Compost. Atmosphere, 9(10), article no. 379.

Nuttall, William J. (2018). Editorial. Proceedings of the Institution of Civil Engineers - Energy, 171(2) pp. 47–48.

O'Flynn, Trish; Macken-Walsh, Áine; Lane, Andy and High, Chris (2018). Farmers doing it for themselves: how farmer-inventors are frustrated by their interactions with the Agricultural Knowledge and Innovation System. In: 13th European IFSA symposium - Farming systems: facing uncertainties and enhancing opportunities, 1-5 Jul 2018, Chania. Crete, International Farming Systems Assocaition.

Ostashev, Vladimir E.; Wilson, D. Keith; Muhlestein, Michael B. and Attenborough, Keith (2018). Correspondence between sound propagation in discrete and continuous random media with application to forest acoustics. The Journal of the Acoustical Society of America, 143(2) pp. 1194–1205.

Patlakas, P.; Livingstone, A.; Hairstans, R. and Neighbour, G. (2018). Automatic code compliance with multi-dimensional data fitting in a BIM context. Advanced Engineering Informatics, 38 pp. 216–231.

Pearson, Richard J.; Antoniazzi, Armando B. and Nuttall, William J. (2018). Tritium supply and use: a key issue for the development of nuclear fusion energy. Fusion Engineering and Design, 136 pp. 1140–1148.

Pereira, H. Jessica; Reed, Joseph; Lee, Jaemin; Varagnolo, Silvia; Dabera, G. Dinesha M. R. and Hatton, Ross A. (2018). Fabrication of Copper Window Electrodes with ≈108Apertures cm−2 for Organic Photovoltaics. Advanced Functional Materials, 28(36) p. 1802893.

Pomponi, Francesco and Moncaster, Alice (2018). Scrutinising embodied carbon in buildings: The next performance gap made manifest. Renewable and Sustainable Energy Reviews, 81(2) pp. 2431–2442.

Pomponi, Francesco; Moncaster, Alice and De Wolf, Catherine (2018). Furthering embodied carbon assessment in practice: results of an industry-academia collaborative research project. Energy and Buildings, 167 pp. 177–186.

Portugal, Steven J.; Bowen, James and Riehl, Christina (2018). A rare mineral, vaterite, acts as a shock absorber in the eggshell of a communally nesting bird. Ibis: international journal of avian science, 160(1) pp. 173–178.

Prabhu, V. L.; Lim, S.; Bowen, J.; Cowley, A.; Katrib, J.; Dodds, C. and Anand, M. (2018). Microwave Heating of Lunar Simulants JSC-1A and NU-LHT-3M: Experimental And Theoretical Analysis. In: European Lunar Symposium (ELS), 13-16 May 2018, Toulouse, France.

Qin, Rongshan (2018). Computation of Electromagnetic Field and Complex Materials Interaction. Progress In Electromagnetics Research Symposium, 2017(Spring) pp. 862–867.

Qin, Rongshan; Luo, Yongkun; Elliott-Bowman, Bernadette and Omoigiade, Osamudiamen (2018). Fabrication of nanostructured pearlite steel wires using electropulsing. Materials Science and Technology, 34 pp. 29–34.

Qually, Byron Alexander (2018). Design and Democracy: Transformative Agency within Indigenous Structure. PhD thesis The Open University.

Rasmussen, Freja Nygaard; Malmqvist, Tove; Moncaster, Alice; Wiberg, Aoife Houlihan and Birgisdóttir, Harpa (2018). Analysing methodological choices in calculations of embodied energy and GHG emissions from buildings. Energy and Buildings, 158 pp. 1487–1498.

Reynolds, Martin (2018). Making policy and making policy work with developmental evaluation. In: Centre for the evaluation of complexity across the nexus (CECAN) webinar series, 24 Jul 2018, Centre for the evaluation of complexity across the nexus (CECAN).

Reynolds, Martin; Sarriott, Eric; Swanson, Robert Chad and Rusoja, Evan (2018). Navigating systems ideas for health practice: towards a common learning device. Journal of Evaluation in Clinical Practice, 24(3) pp. 619–628.

Reynolds, Martin and Shah, Rupesh (2018). Researching capability development: developing systems thinking in practice capabilities. In: Symposium on Governing Complexity: developing appropriate praxis with citizens and organisations, 12 Jun 2018, Milton Keynes, The Open University.

Reynolds, Martin; Shah, Rupesh and van Ameijde, Jitse (2018). Framing professional competencies for systems thinking in practice: final report of an action research eSTEeM inquiry. The Open University, Milton Keynes.

Rigoni, C.; Ferraro, D.; Carlassara, M.; Filippi, D.; Varagnolo, Silvia; Pierno, M.; Talbot, D.; Abou-Hassan, A. and Mistura, G. (2018). Dynamics of Ferrofluid Drops on Magnetically Patterned Surfaces. Langmuir, 34(30) pp. 8917–8922.

Rolph, C. A.; Jefferson, B.; Hassard, F. and Villa, R. (2018). Metaldehyde removal from drinking water by adsorption onto filtration media: mechanisms and optimisation. Environmental Science: Water Research & Technology (Early Access).

Rolph, Catherine A.; Gwyther, Ceri L.; Tyrrel, Sean F.; Nasir, Zaheer A.; Drew, Gillian H.; Jackson, Simon K.; Khera, Shagun; Hayes, Enda T.; Williams, Ben; Bennett, Allan; Collins, Samuel; Walsh, Kerry; Kinnersley, Rob and Gladding, Toni L. (2018). Sources of Airborne Endotoxins in Ambient Air and Exposure of Nearby Communities—A Review. Atmosphere, 9(10), article no. 375.

Rowbotham, Alex (2018). Designing for Fluid Transitions to Sustainable Infrastructure: The Case of the Bedford & Milton Keynes Waterway. PhD thesis The Open University.

Roy, Robin (2018). Consumer product design: Patterns of innovation, market success and sustainability. Journal of International Business Research and Marketing, 3(5) pp. 25–33.

Roy, Robin and Warren, James (2018). Card-based Tools For Creative And Systematic Design. In: Proceedings of the Design Research Society DRS2018 conference (TBC), pp. 1075–1087.

Ruiz-Ramos, Javier; Marino, Armando and Boardman, Carl P. (2018). Polarimetry SAR detectors for monitoring Mediterranean forest fires events. In: Wavelength conference 2018, 12-14 Mar 2018, University of Sheffield.

Ruiz-Ramos, Javier; Marino, Armando and Boardman, Carl P. (2018). Using Sentinel 1-SAR for Monitoring Long Term Variation in Burnt Forest Areas. In: IGARSS 2018 - 2018 IEEE International Geoscience and Remote Sensing Symposium, 22-27 Jul 2018, Valencia, Spain, pp. 4901–4904.

Rusoja, Evan; Haynie, Deson; Sievers, Jessica; Mustafee, Navonil; Nelson, Fred; Reynolds, Martin; Sarriot, Eric; Swanson, Robert Chad and Williams, Bob (2018). Thinking about complexity in health: A systematic review of the key systems thinking and complexity ideas in health. Journal of Evaluation in Clinical Practice, 24(3) pp. 600–606.

Sarkar, A.; Chakraborty, Amit K.; Bera, S. and Krishnamurthy, S. (2018). Novel Hydrothermal Synthesis of CoS2/MWCNT Nanohybrid Electrode for Supercapacitor: A Systematic Investigation on the Influence of MWCNT. The Journal of Physical Chemistry C, 122(23) pp. 18237–18246.

Seale, Catherine; Lane, Andy; High, Chris; Macken-Walsh, Aine and Reynolds, Martin (2018). Reaping the rewards of learning within agricultural knowledge systems: An account of a PhD learning system. In: 13th European IFSA symposium - Farming systems: facing uncertainties and enhancing opportunities, 1-5 Jul 2018, Chania. Crete, International Farming Systems Association.

Shepherd, Theodore G.; Boyd, Emily; Calel, Raphael A.; Chapman, Sandra C.; Dessai, Suraje; Dima-West, Ioana M.; Fowler, Hayley J.; James, Rachel; Maraun, Douglas; Martius, Olivia; Senior, Catherine A.; Sobel, Adam H.; Stainforth, David A.; Tett, Simon F. B.; Trenberth, Kevin E.; van den Hurk, Bart J. J. M.; Watkins, Nicholas; Wilby, Robert L. and Zenghelis, Dimitri A. (2018). Storylines: an alternative approach to representing uncertainty in physical aspects of climate change. Climatic Change, 151(3-4) pp. 555–571.

Shin, Ho-Chul (2018). Image conditions for polar and cylindrical coordinate separation-of-variables acoustic multiple scattering models with perfectly reflecting flat boundaries. The Quarterly Journal of Mechanics and Applied Mathematics, 71(3) pp. 273–296.

Shirzadi, Amir A.; Laik, Arijit; Tewari, Raghvendra; Orsborn, Jonathan and Dey, Gautam K. (2018). Gallium-assisted diffusion bonding of stainless steel to titanium; microstructural evolution and bond strength. Materialia, 4 pp. 115–126.

Silva, Cristian; Marino, Armando; Lopez-Sanchez, Jua and Cameron, Iain (2018). Monitoring Agricultural Fields Using an Optimisation of the Difference of Covariance Matrices for Polsar. In: IGARSS 2018: IEEE International Geoscience and Remote Sensing Symposium, 22-27 Jul 2018, Valencia, Spain, pp. 6619–6622.

Sinclair, Matt; Sheldrick, Leila; Moreno, Mariale and Dewberry, Emma (2018). Consumer Intervention Mapping—A Tool for Designing Future Product Strategies within Circular Product Service Systems. Sustainability, 10(6), article no. 2088.

Singh, Namita; High, Chris; Lane, Andy and Oreszczyn, Sue (2018). Building agency through participatory video: insights from the experiences of young women participants in India. Gender, Technology and Development, 21(3) pp. 173–188.

Singh, Sapna; Lotz, Nicole and Sanders, Elizabeth B.-N. (2018). Envisioning Futures of Design Education: An Exploratory Workshop with Design Educator. Dialectic, 2(1) pp. 15–42.

Sultana, Shalahin (2018). Application of pulsed electric current in immiscible liquid and droplet processing. Materials Science and Technology, 34(14) pp. 1631–1638.

Tindale, E.; Chapman, S. C.; Moloney, N. R. and Watkins, N. W. (2018). The dependence of solar wind burst size on burst duration and its invariance across solar cycles 23 and 24. Journal of Geophysical Research: Space Physics, 123(9) pp. 7196–7210.

Valdez Juarez, Alan; Cook, Matthew and Potter, Stephen (2018). Roadmaps to Utopia: Tales of the Smart City. Urban Studies, 55(15) pp. 3385–3403.

Valdez Juarez, Alan-Miguel; Cook, Matthew; Langendahl, Per-Anders; Roby, Helen and Potter, Stephen (2018). Prototyping sustainable mobility practices: user-generated data in the smart city. Technology Analysis & Strategic Management, 30(2) pp. 144–157.

Valdez Juarez, Alan-Miguel; Cook, Matthew; Potter, Stephen and Langendahl, Per-Anders (2018). Exploring participatory visions of smart transport in Milton Keynes. Proceedings of the Institution of Civil Engineers - Engineering Sustainability, 171(4) pp. 204–210.

Warren, James (2018). [Book Review] The Psychology of the Car: Automobile Admiration, Attachment and Addiction by Stefan Gössling (Elsevier, Amsterdam, Netherlands (2017)). Journal of Transport Geography, 69 p. 308.

Watkins, Nicholas W. (2018). (A)phantasia and severely deficient autobiographical memory: Scientific and personal perspectives. Cortex, 105 pp. 41–52.

Wehn, Uta; Collins, Kevin; Anema, Kim; Basco-Carrera, Laura and Lerebours, Alix (2018). Stakeholder engagement in water governance as social learning: lessons from practice. Water International, 43(1) pp. 34–59.

Wei, Yongping; Ison, Ray; Western, Andrew W. and Lu, Zhixiang (2018). Understanding ourselves and the environment in which we live. Current Opinion in Environmental Sustainability, 33 pp. 161–166.

Welden, N. A.; Wolseley, P. A. and Ashmore, M. R. (2018). Citizen science identifies the effects of nitrogen deposition, climate and tree species on epiphytic lichens across the UK. Environmental Pollution, 232 pp. 80–89.

Wijesekara, Anjana; Varagnolo, Silvia; Dabera, G. Dinesha M. R.; Marshall, Kenneth P.; Pereira, H. Jessica and Hatton, Ross A. (2018). Assessing the suitability of copper thiocyanate as a hole-transport layer in inverted CsSnI3 perovskite photovoltaics. Scientific Reports, 8(1)

Williams, Ben; Hayes, Enda; Nasir, Zaheer; Rolph, Catherine; Jackson, Simon; Khera, Shagun; Bennett, Alan; Gladding, Toni; Drew, Gillian; Longhurst, James and Tyrrel, Sean (2018). Towards improved bioaerosol model validation and verification. In: WIT Transactions on Ecology and the Environment, WIT Press, 230 pp. 41–50.

Yuriev, A. A.; Gromov, V. E.; Grishunin, V. A.; Ivanov, Yu. F.; Qin, R. S. and Semin, A. P. (2018). Stages and Fracture Mechanisms of Lamellar Pearlite of 100-m-Long Differentially Hardened Rails Under Long-Term Operation Conditions. Acta Metallurgica Sinica (English Letters), 31(12) pp. 1356–1360.

Zamenopoulos, Theodore and Alexiou, Katerina (2018). Co-design As Collaborative Research. Connected Communities Foundation Series. Bristol: Bristol University/AHRC Connected Communities Programme.

Zhang, Chengcong and Shirzadi, Amir A. (2018). Measurement of residual stresses in dissimilar friction stir-welded aluminium and copper plates using the contour method. Science and Technology of Welding and Joining, 23(5) pp. 394–399.

Zhang, Xin; Gale, Colin and Eckert, Claudia (2018). Chinese Consumers and the Knitwear Fashion Market. In: Xu, Yingjiao; Chi, Ting and Su, Jin eds. Chinese Consumers and the Fashion Market. Springer Series in Fashion Business. Singapore: Springer, pp. 193–212.

Zhang, Xinfang and Qin, Rongshan (2018). Exploring the Particle Reconfiguration in the Metallic Materials under the Pulsed Electric Current. Steel Research International, 89(12), article no. 1800062.

Zhao, Yan; He, Binyan; Saillet, Sébastien; Domain, Christophe; Le Delliou, Patrick; Perez, Michel and Qin, Rongshan (2018). Anti-aging treatment of nuclear power plant steel. Materials Science and Engineering: A, 735 pp. 73–80.

2017To Top

Dastbaz, Mohammad; Gorse, Chris and Moncaster, Alice eds. (2017). Building Information Modelling, High Performance Design and Smart Construction. Springer.

Johnson, Jeffrey; Nowak, Andrzej; Ormerod, Paul; Rosewell, Bridget and Zhang, Yi-Cheng eds. (2017). Non-Equilibrium Social Science and Policy: Introduction and Essays on New and Changing Paradigms in Socio-Economic Thinking. Understanding Complex Systems. Cham, Switzerland: Springer.

Peake, Stephen ed. (2017). Renewable Energy: Power for a Sustainable Future (4th Ed.). Oxford: Oxford University Press.

Robertson, Judy; Williams, Alison; Jones, Derek; Isbel, Lara and Loads, Daphne eds. (2017). EqualBITE: Gender equality in higher education. Rotterdam: Sense Publishers.

Acar, Murat O. and Fitzpatrick, Michael E. (2017). Determination of plasticity following deformation and welding of austenitic stainless steel. Materials Science and Engineering: A, 701 pp. 203–213.

Achouri, A.; Bouchard, P. J.; Kabra, S. and Hosseinzadeh, F. (2017). Asymmetric Cuts In The Contour Method For Residual Stress Measurement. In: Proceedings of the 7th International Conference on Mechanics and Materials in Design, INEGI/FEUP, Albufeira, pp. 1177–1178.

Alyami, Hamad; Dahmash, Eman; Bowen, James and Mohammed, Afzal R. (2017). An investigation into the effects of excipient particle size, blending techniques and processing parameters on the homogeneity and content uniformity of a blend containing low-dose model drug. PLoS ONE, 12(6), article no. e0178772.

Alyami, Hamad; Koner, Jasdip; Dahmash, Eman Z.; Bowen, James; Terry, David and Mohammed, Afzal R. (2017). Microparticle surface layering through dry coating: impact of moisture content and process parameters on the properties of orally disintegrating tablets. Journal of Pharmacy and Pharmacology, 69(7) pp. 807–822.

Anderson, Jane (2017). Sustainable construction material selection and specification. In: Strong, David and Burrows, Victoria eds. A Whole-System Approach to High-Performance Green Buildings. Artech House, p. 44.

Anderson, Jane; Beavan, Michael; Galeazzi, Francesca; Keeping, Miles; Shiers, David and Steele, Kristian (2017). Materials. In: Keeping, Miles and Shiers, David eds. Sustainable Built Environments: Principles and Practice. Oxford: Wiley, pp. 145–158.

Asgari, Behnoosh and Bowen, James (2017). Gallium (III)-metalloporphyrin grafted magnetite nanoparticles for fluoride removal from aqueous solutions. Natural Products Chemistry & Research, 5(5), article no. 282.

Ashley, S. F.; Vaughan, G. J.; Nuttall, W. J. and Thomas, P. J. (2017). Considerations in relation to off-site emergency procedures and response for nuclear accidents. Process Safety and Environmental Protection, 112(A) pp. 77–95.

Ashley, S.F.; Vaughan, G.J.; Nuttall, W.J.; Thomas, P.J. and Higgins, N.A. (2017). Predicting the cost of the consequences of a large nuclear accident in the UK. Process Safety and Environmental Protection, 112 pp. 96–113.

Bagga, K.; McCann, R.; O'Sullivan, F.; Ghosh, P.; Krishnamurthy, S.; Stalcup, A.; Vázquez, M. and Brabazon, D. (2017). Nanoparticle functionalized laser patterned substrate: an innovative route towards low cost biomimetic platforms. RSC Advances, 7 pp. 8060–8069.

Baker, H. E. and Moncaster, A. (2017). The Role Of Stakeholders In Masterplan Regeneration Decisions. In: World Sustainable Built Environment Conference, 5-7 Jun 2017, Hong Kong.

Baker, Hannah and Moncaster, Alice (2017). Demolition and adaptation at the CB1 development, Cambridge. In: 24th Annual Conference of the the European Real Estate Society, 28 Jun - 1 Jul, Delft, Netherlands.

Baker, Hannah; Moncaster, Alice and Al Tabbaa, Abur (2017). Decision-making for the demolition or adaptation of buildings. Proceedings of the Institution of Civil Engineers - Forensic Engineering, 170(3) pp. 144–156.

Bell, Simon (2017). The Formations of Terror. London: Cambridge Scholars.

Bell, Simon (2017). ‘Imagine’: mapping sustainability indicators. In: Oreszczyn, Sue and Lane, Andy eds. Mapping environmental sustainability: reflecting on systemic practices for participatory research. Bristol: Policy Press, pp. 183–204.

Bell, Simon and Cutting, Charles (2017). Project Fear. Open University: Open Learn, Open University.

Bell, Simon; Douce, Chris; Caeiro, Sandra; Teixeira, Antonio; Marin-Aranda, Rosa and Otto, Daniel (2017). Sustainability and distance learning: a diverse European experience? Open Learning, 32(2) pp. 95–102.

Bell, Simon; Lane, Andy; Collins, Kevin; Berardi, Andrea and Slater, Rachel (2017). Teaching Environmental Management Competencies Online: Towards “Authentic” Collaboration? European Journal of Open, Distance and e-Learning, 20(1) pp. 22–44.

Bell, Simon; Mahroun, Sami and Yassin, Nasser (2017). Towards understanding problem structuring and groups with triple task methodology 'e'. Journal of the Operational Research Society, 68(2) pp. 192–206.

Bell, Simon and Morse, Stephen (2017). A basis for systemic sustainability measurement: an update. In: Caradonna, Jeremy L. ed. Routledge Handbook of the History of Sustainability. Abingdon: Routledge, 187 -218.

Berardi, Andrea; Mistry, Jay; Haynes, Lakeram; Jafferally, Deidre; Bignante, Elisa; Albert, Grace; Xavier, Rebecca; Benjamin, Ryan and de Ville, Geraud (2017). Using visual approaches with Indigenous communities. In: Oreszczyn, Sue and Lane, Andy eds. Mapping environmental sustainability: reflecting on systemic practices for participatory research. Bristol: Policy Press, pp. 103–128.

Birgisdottir, H.; Moncaster, A.; Houlihan Wiberg, A.; Chae, C.; Yokoyama, K.; Balouktsi, M.; Seo, S.; Oka, T.; Lützkendorf, T. and Malmqvist, T. (2017). IEA EBC Annex 57 ‘Evaluation of Embodied Energy and CO2eq for Building Construction'. Energy and Buildings, 154 pp. 72–80.

Blackmore, Chris; Foster, Natalie; Collins, Kevin and Ison, Ray (2017). Understanding and developing communities of practice through diagramming. In: Oreszczyn, Sue and Lane, Andy eds. Mapping environmental sustainability: reflecting on systemic practices for participatory research. London: Policy Press, pp. 155–182.

Boardman, C. P.; Summers, S. S.; Olsson-Francis, K. and Gladding, T. (2017). Plastic Microbial Acclimation and Optimisation of Composting and Anaerobic Digestion Processes may Improve Degradation Times. In: 16th International Waste Management and Landfill Symposium (Sardinia 2017), 2-6 Oct 2017, S. Margherita di Pula, Sardinia, Italy,.

Bohm, Matthew; Eckert, Claudia; Sen, Chiradeep; Srinivasan, Venkatamaran; Summers, Joshua D. and Vermaas, Pieter (2017). Thoughts on Benchmarking of Function Modeling: Why and How. Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 31(4) pp. 393–400.

Bowen, James and Cheneler, David (2017). Selecting suitable image dimensions for scanning probe microscopy. Surfaces and Interfaces, 9 pp. 132–142.

Brankley, Lee; Tugrul, Ayhan; Anderson, Jane and Knight, David (2017). A Manufacturing Sector's Experience of integrating EPD alongside product, management system and responsible sourcing certification for public procurement. In: LCM 2017: 8th International Conference on Life Cycle Management, 4-7 Sep 2017, Luxembourg.

Brankley, Lee; Tugrul, Ayhan; Knight, David and Anderson, Jane (2017). Sustainability and Life Cycle Analysis Data in Construction Materials Certifications - A Case Study from the Steel Industry. In: EFRS - 6th International Iron & Steel Symposium, 25-26 May 2017, Izmir, Turkey.

Burnley, Stephen and Boardman, Carl (2017). The Use Of Dynamic Life Cycle Assessment To Evaluate The Long Term Climate Change Impacts Of Waste Management Processes. In: Sardinia_2017.

Buys, Kurijn; Sharp, David and Laney, Robin (2017). Development of a hybrid wind instrument—Some key findings. In: Journal of the Acoustical Society of America, 141(5), article no. 3620.

Buys, Kurijn; Sharp, David and Laney, Robin (2017). Developing and evaluating a hybrid wind instrument. Acta Acustica united with Acustica, 103(5) pp. 830–846.

Caird, S.; Hudson, L. and Kortuem, G. (2017). Communication on Smart City Evaluation and Reporting In UK cities: Pilots, Demos and Experiments Case. In: Smart Cities in Smart Regions 2016: Conference Proceedings (Aalto, Anna and Montonen, Laura eds.), The publication series of Lahti University of Applied Sciences, part 27, Finland., Lahti University of Applied Sciences, Finland, pp. 20–28.

Cardin, Michel-Alexandre; Zhang, Sizhe and Nuttall, William J. (2017). Strategic Real Option and Flexibility Analysis for Nuclear Power Plants Considering Uncertainty in Electricity Demand and Public Acceptance. Energy Economics, 64 pp. 226–237.

Catulli, Maurizio; Cook, Matthew and Potter, Stephen (2017). Product Service Systems Users and Harley Davidson Riders: the importance of consumer identity in the diffusion of sustainable consumption solutions. Journal of Industrial Ecology, 21(5) pp. 1370–1379.

Catulli, Maurizio; Cook, Matthew and Potter, Stephen (2017). Consuming use orientated product service systems: A consumer culture theory perspective. Journal of Cleaner Production, 141 pp. 1186–1193.

Chong, Kok Boon and Fitzpatrick, Michael E. (2017). Evolution of stress fields and phase content in corroded zirconium cladding materials. Surface and Coatings Technology, 324 pp. 140–145.

Conroy, Brian; Traore, Yeli; Paddea, Sanjooram; Kelleher, Joe and Tanner, David (2017). Application of multiple residual stress determination methods to coarse-grained biomedical implant castings. Materials Science and Technology, 33(10) pp. 1231–1251.

Cook, Matthew and Edensor, Tim (2017). Cycling through Dark Space: Apprehending the Landscape Otherwise. Mobilities, 12(1) pp. 1–19.

Coto, Michael; Divitini, Giorgio; Dey, Avishek; Krishnamurthy, Satheesh; Ullah, Najeeb; Ducati, Cate and Kumar, R. Vasant (2017). Tuning the properties of a black TiO2-Ag visible light photocatalyst produced by rapid one-pot chemical reduction. Materials Today Chemistry, 4 pp. 142–149.

Crotty, James and Horrocks, Ivan (2017). Managing legacy system costs: A case study of a meta-assessment model to identify solutions in a large financial services company. Applied Computing and Informatics, 13(2) pp. 175–183.

Cuce, Erdem; Nachan, Zaid; Cuce, Pinar Mert; Sher, Farooq and Neighbour, Gareth (2017). Strategies for ideal indoor environments towards low/zero carbon buildings through a biomimetic approach. International Journal of Ambient Energy, 40(1) pp. 86–95.

Das, Yadunandan (2017). Characterization of Stresses and Strains Involved in the Martensitic Phase Transformations. PhD thesis The Open University.

de Ville de Goyet, Geraud (2017). Evaluating How Information and Communication Technology (ICT) Interventions Affect the Wellbeing of Indigenous Communities in the North Rupununi, Guyana. PhD thesis The Open University.

de Vries, Jasper R.; van Bommel, Severine; Blackmore, Chris and Asano, Yoshiko (2017). Where There Is No History: How to Create Trust and Connection in Learning for Transformation in Water Governance. Water, 9(2) p. 130.

De Wolf, Catherine; Pomponi, Francesco and Moncaster, Alice (2017). Measuring embodied carbon dioxide equivalent of buildings: A review and critique of current industry practice. Energy and Buildings, 140 pp. 68–80.

Devlin-Mullin, Aine; Todd, Naomi M.; Golrokhi, Zahra; Geng, Hua; Hunt, John A.; Potter, Richard; Sutcliffe, Chris; Jones, Eric; Lee, Peter D. and Mitchel, Christopher A. (2017). Atomic Layer Deposition of a Silver Nanolayer on Advanced Titanium Orthopedic Implants Inhibits Bacterial Colonization and Supports Vascularized de Novo Bone Ingrowth. Advanced Healthcare Materials, 6(11), article no. 1700033.

Dewberry, E. L.; Sheldrick, L.; Moreno, M.; Sinclair, M. and Makatsoris, C. (2017). Developing Scenarios for Product Longevity and Sufficiency. In: PLATE: Product Lifetimes And The Environment, Research in Design Series, pp. 108–113.

Dillon, Martha and Moncaster, Alice (2017). Women, Boards and the UK Built Environment: Investigating the business case for improved gender diversity on the boards of built environment firms. Equilibrium Network.

Dinovitser, Alex; Valchev, Dimitar G. and Abbott, Derek (2017). Terahertz time-domain spectroscopy of edible oils. Royal Society Open Science, 4(6), article no. 170275.

Drysdale, Timothy D. and Braithwaite, N. St.J. (2017). An internet of laboratory things. In: 2017 4th Experiment@International Conference (exp.at'17), pp. 236–240.

Dum, Ralph and Johnson, Jeffrey (2017). Global Systems Science and Policy. In: Johnson, Jeffrey; Nowak, Andrzej; Ormerod, Paul; Rosewell, Bridget and Zhang, Yi-Cheng eds. Non-Equilibrium Social Science and Policy: Introduction and Essays on New and Changing Paradigms in Socio-Economic Thinking. Understanding Complex Systems. Cham, Switzerland: Springer, pp. 209–225.

Earl, Chris (2017). [Book Review] Adam Sharr and Stephen Thornton, Demolishing Whitehall: Leslie Martin, Harold Wilson and the architecture of white heat. Farnham, Surrey: Ashgate, 2013. Environment and Planning B: Planning and Design, 44(1) pp. 180–181.

Eckert, Claudia and Isaksson, Ola (2017). Safety Margins and Design Margins: A Differentiation between Interconnected Concepts. In: Procedia CIRP, 60 pp. 267–272.

Eckert, Claudia M.; Wynn, David C.; Maier, Jakob F.; Albers, Albert; Bursac, Nikola; Xin Chen, Hilario L.; Clarkson, P. John; Gericke, Kilian; Gladysz, Bartosz and Shapiro, Daniel (2017). On the integration of product and process models in engineering design. Design Science (In Press).

Edson, Mary; Buckle Henning, Pam; Ferris, Tim; Hieronymi, Andreas; Ison, Ray; Metcalf, Gary; Mobus, George; Nguyen, Nam; Rousseau, David; Sankaran, Shankar and Tuddenham, Peter (2017). Team 3: Exploring the relationship of systems research to systems literacy. In: Systems Literacy: Proceedings of the Eighteenth IFSR Conversation 2016 (Edson, Mary C.; Metcalf, Gary S.; Tuddenham, Peter and Chroust, Gerhard eds.), pp. 64–76.

El Aziz, Youssef; Mehrban, Nazia; Taylor, Peter G.; Birchall, Martin A.; Bowen, James; Bassindale, Alan R.; Pitak, Mateusz B. and Coles, Simon J. (2017). Facile synthesis of novel hybrid POSS biomolecules via “Click” reactions. RSC Advances, 7(59) pp. 37474–37477.

Elsayed, Eman; Wang, Haiyan; Anderson, Paul A.; Al-Dadah, Raya; Mahmoud, Saad; Navarro, Helena; Ding, Yulong and Bowen, James (2017). Development of MIL-101(Cr)/GrO Composites for adsorption heat pump applications. Microporous and Mesoporous Materials, 244 pp. 180–191.

Engel, Christian; Goolaup, Sarjoosing; Luo, Feilong and Lew, Wen Siang (2017). Quantitative characterization of spin-orbit torques in Pt/Co/Pt/Co/Ta/BTO heterostructures due to the magnetization azimuthal angle dependence. Physical Review B, 96(5), article no. 054407.

Farsi, A.; Pullen, A. D.; Latham, J. P.; Bowen, J.; Carlsson, M.; Stitt, E. H. and Marigo, M. (2017). Full deflection profile calculation and Young’s modulus optimisation for engineered high performance materials. Scientific reports, 7, article no. 46190.

Fokaides, Paris A.; Polycarpou, Kyriacos and Kalogirou, Soteris (2017). The impact of the implementation of the European Energy Performance of Buildings Directive on the European building stock: The case of the Cyprus Land Development Corporation. Energy Policy, 111 pp. 1–8.

Galpin, C. and Moncaster, A. (2017). Inclusion of on-site renewables in design-stage building life cycle assessments. In: 9th International Conference on Sustainability in Energy and Buildings SEB-17, 5-7 Jul 2017, Crete, Greece.

Galpin, C. and Moncaster, A. (2017). Inclusion of on-site renewables in design-stage building life cycle assessments. Energy Procedia, 134 pp. 452–461.

Geng, Hua; Poologasundarampillai, Gowsihan; Todd, Naomi; Devlin-Mullin, Aine; Moore, Katie L.; Golrokhi, Zahra; Gilchrist, James B.; Jones, Eric; Potter, Richard J.; Sutcliffe, Chris; O’Brien, Marie; Hukins, David W. L.; Cartmell, Sarah; Mitchell, Christopher A. and Lee, Peter D. (2017). Biotransformation of Silver Released from Nanoparticle Coated Titanium Implants Revealed in Regenerating Bone. ACS Applied Materials & Interfaces, 9(25) pp. 21169–21180.

Gerrike, Kilian; Eckert, Claudia and Stacey, Martin (2017). What do we need to say about a design method? In: 21th International Conference on Engineering Design (ICED 2015), 21-25 Aug 2017, Vancouver, Canada.

Gladding, Toni L. and Gwyther, Ceri L. (2017). A study of the potential release of bioaerosols from containers as a result of reduced frequency residual waste collections. Science of the Total Environment, 576 pp. 481–489.

Golrokhi, Zahra; Marshall, Paul A.; Romani, Simon; Rushworth, Simon; Chalker, Paul R. and Potter, Richard J. (2017). The influence of tertiary butyl hydrazine as a co-reactant on the atomic layer deposition of silver. Applied Surface Science, 399 pp. 123–131.

Goncalves, F. J. T.; Paterson, G. W.; McGrouther, D.; Drysdale, T.; Togawa, Y.; Schmool, D. S. and Stamps, R. L. (2017). Probing microwave fields and enabling in-situ experiments in a transmission electron microscope. Scientific reports, 7(1) p. 11064.

Graves, Timothy; Franzke, Christian L.E.; Watkins, Nicholas W.; Gramacy, Robert B. and Tindale, Elizabeth (2017). Systematic inference of the long-range dependence and heavy-tail distribution parameters of ARFIMA models. Physica A: Statistical Mechanics and its Applications, 473 pp. 60–71.

Gromov, V. E.; Ivanov, Yu. F.; Qin, R. S.; Peregudov, O. A.; Aksenova, K. V. and Semina, O. A. (2017). Degradation of structure and properties of rail surface layer at long-term operation. Materials Science and Technology, 33(12) pp. 1473–1478.

Hall, D.J.; Wood, D.; Murray, N.J.; Gow, J.P.D.; Chroneos, A. and Holland, A. (2017). In situ trap properties in CCDs: the donor level of the silicon divacancy. Journal of Instrumentation, 12, article no. P01025.

Hallett, Stephen H. and Caird, Sally P. (2017). Soil-Net - Development and impact of an innovative, open, online soil science educational resource. Soil Science, 182(5) pp. 188–201.

Heeley, Ellen L.; Hughes, Darren J.; Crabb, Eleanor M.; Bowen, James; Bikondoa, Oier; Mayoral, Beatriz; Leung, Sandy and McNally, Tony (2017). The formation of a nanohybrid shish-kebab (NHSK) structure in melt-processed composites of poly (ethylene terephthalate) (PET) and multi-walled carbon nanotubes (MWCNTs). Polymer, 117 pp. 208–219.

Heeley, Ellen L.; Hughes, Darren J.; Crabb, Eleanor M.; Bowen, James; Bikondoa, Oier; Mayoral, Beatriz and McNally, Tony (2017). Confirmation of a Nanohybrid Shish-Kebab (NHSK) Structure in Composites of PET and MWCNTs. Journal of Polymer Science. Part B: Polymer Physics, 55(2) pp. 132–137.

Heffron, Raphael J. and Nuttall, William J. (2017). Scotland, Nuclear Energy Policy and Independence. In: Wood, Geoffrey and Baker, Keith eds. A Critical Review of Scottish Renewable and Low Carbon Energy Policy. Energy, Climate and the Environment. Cham, Switzerland: Palgrave Macmillan, pp. 103–126.

Hibbert, William A.; Taherzadeh, Shahram and Sharp, David B. (2017). Virtual Pitch and Pitch Shifts in Church Bells. Open Journal of Acoustics, 7(3) pp. 52–68.

Hu, F.; Wu, K. M.; Wan, X. L.; Rodionova, I.; Shirzadi, A. A. and Zhang, F. C. (2017). Novel method for refinement of retained austenite in micro/nano-structured bainitic steels. Materials Science and Technology, 33(11) pp. 1360–1365.

Hubert, Bernard and Ison, Ray (2017). Systems Thinking: Towards Transformation in Praxis and Situations. In: Ӧborn, Ingrid; Vanlauwe, Bernard; Phillips, Michael; Thomas, Richard; Brooijmans, Willemien and Atta-Krah, Kwesi eds. Sustainable Intensification in Smallholder Agriculture: An integrated systems research approach. London: Earthscan, Routledge, pp. 115–129.

Ison, Ray (2017). Systems Practice: How to Act. In situations of uncertainty and complexity in a climate-change world. 2nd Edition. Springer & The Open University.

Ison, Ray (2017). Transdisciplinarity as transformation: a cybersystemic thinking in practice perspective. In: Fam, Dena; Palmer, Jane; Riedy, Chris and Mitchell, Cynthia eds. Transdisciplinary Research and Practice for Sustainable Outcomes. London: Routledge, pp. 55–73.

Ison, Ray and Biggs, Duan (2017). "Frame" capture - why the war on poaching can never be won: about the John Hanks’ book Operation lock and the war on rhino poaching. Natures Sciences Sociétés, 25(1) pp. 63–69.

Ison, Ray and Wei, YongPing (2017). Watershed systems science – a new paradigm to understand and govern the impact of human activities on the earth’s surface in the Anthropocene. Science China Earth Sciences, 60 pp. 2225–2227.

Ison, Raymond L. (2017). Structural coupling: can ecological economics offer value? In: 12th Conference of the European Society for Ecological Economics, 20-23 Jun 2017, Budapest.

Ison, Raymond L. and Wallis, Philip J. (2017). Mechanisms for inclusive governance. In: Karar, Eiman ed. Freshwater Governance for the 21st Century. Global Issues in Water Policy (6). Springer, pp. 159–185.

Javadi, Y.; Smith, M.C.; Abburi Venkata, K.; Naveed, N.; Forsey, A.N.; Francis, J.A.; Ainsworth, R.A.; Truman, C.E.; Smith, D.J.; Hosseinzadeh, F.; Gungor, S.; Bouchard, P. J.; Dey, H.C.; Bhaduri, A.K. and Mahadevan, S. (2017). Residual stress measurement round robin on an electron beam welded joint between austenitic stainless steel 316L(N) and ferritic steel P91. International Journal of Pressure Vessels and Piping, 154 pp. 41–57.

Jeffries, Karl K. (2017). Skills for Creativity in Graphic Design: Testing the relationship between visualisation, written comprehension, and graphic design creativity. PhD thesis The Open University.

Jimenez-Romero, Cristian (2017). A Heterosynaptic Spiking Neural System for the Development of Autonomous Agents. PhD thesis The Open University.

Jimenez-Romero, Cristian and Johnson, Jeffrey (2017). SpikingLab: modelling agents controlled by Spiking Neural Networks in Netlogo. Neural Computing and Applications, 28(Suppl 1) pp. 755–764.

Johnson, Jeffrey; Denning, Peter; Sousa-Rodrigues, David and Delic, Kemal A. (2017). Big Data, Digitization, and Social Change (Ubiquity Symposium). In: Ubiquity, ACM, 2017, article no. 1.

Johnson, Jeffrey; Fortune, Joyce and Bromley, Jane M. (2017). Systems, Networks and Policy. In: Johnson, Jeffrey; Nowak, Andrzej; Ormerod, Paul; Rosewell, Bridget and Zhang, Yi-Chang eds. Non-Equilibrium Social Science and Policy: Introduction and Essays on New and Changing Paradigms in Socio-Economic Thinking. Understanding Complex Systems. Cham, Switzerland: Springer, pp. 111–134.

Johnson, Jeffrey; Ormerod, Paul; Nowak, Andrzej; Rosewell, Bridget and Zhang, Yi-Cheng (2017). Non-Equilibrium Social Science and Policy. In: Johnson, Jeffrey; Nowak, Andrzej; Ormerod, Paul; Rosewell, Bridget and Zhang, Y-Cheng eds. Non-Equilibrium Social Science and Policy: Introduction and Essays on New and Changing Paradigms in Socio-Economic Thinking. Understanding Complexity. Cham, Switzerland: Springer, pp. 1–17.

Jones, Darren and Eckert, Claudia (2017). Overdesign in building services: the hidden energy use. In: 21st International Conference on Engineering Design, 21-25 Aug 2017, Vancouver, Canada.

Jones, Derek (2017). Embodied cognitive ecosophy: the relationship of mind, body, meaning and ecology. Geografiska Annaler: Series B, Human Geography, 99(2) pp. 156–171.

Jones, Derek (2017). Narrative Realities and Optimal Entropy. In: Proceedings, MDPI AG, Basel, Switzerland, 1(3), article no. 51.

Jones, Derek; Lotz, Nicole and Holden, Georgina (2017). Lurking and learning: Making learning visible in a Virtual Design Studio. In: Proceedings of the LearnX Design London 2017 Conference (Pritchard, Gary and Lambert, Nick eds.), London, pp. 176–183.

Joss, Simon; Cook, Matthew and Dayot, Youri (2017). Smart Cities: Towards a New Citizenship Regime? A Discourse Analysis of the British Smart City Standard. Journal of Urban Technology, 24(4) pp. 29–49.

Jowers, Iestyn; Earl, Chris and Stiny, George (2017). Shape computations without compositions. In: Çağdaş, G.; Özkar, M.; Gül, L. F. and Gürer, E. eds. Computer-Aided Architectural Design. Future Trajectories. 17th International Conference, CAAD Futures 2017, Istanbul, Turkey, July 12-14, 2017, Selected Papers. Springer, pp. 348–365.

Jowers, Iestyn and Earl, Christopher (2017). Structures in shapes: a perspective from rules and embedding. In: Cultural DNA Workshop 2017, 13 Jan 2017, KAIST Graduate School of Culture Technology.

Jowers, Iestyn and Earl, Christopher (2017). Incommensurable design descriptions. In: Creative Design and Advanced Manufacturing: An emerging application area for Signals and Systems, 2 Sep 2017, 2017 25th European Signal Processing Conference (EUSIPCO), Kos, Greece.

Jowers, Iestyn; Gaved, Mark; Dallison, Delphine; Elliott-Cirigottis, Gary; Rochead, Alan and Craig, Mark (2017). A case study in online formal/informal learning: was it collaborative or cooperative learning? Design and Technology Education: an International Journal, 22(1)

Kaklamani, Georgia; Cheneler, David; Grover, Liam M.; Adams, Michael J.; Anastasiadis, Spiros H. and Bowen, James (2017). Anisotropic dehydration of hydrogel surfaces. Progress in Biomaterials, 6(4) pp. 157–164.

Kale, Dinar and Huzair, Farah (2017). Heterogeneity in learning processes and the evolution of dynamic managerial capabilities as a response of emergence of biosimilar market: evidence from the Indian pharmaceutical industry. Technology Analysis and Strategic Management, 29(3) pp. 300–312.

Kapadia, Priyesh; Davies, Catrin; Pirling, Thilo; Hofmann, Michael; Wimpory, Robert; Hosseinzadeh, Foroogh; Dean, David and Nikbin, Kamran (2017). Quantification of Residual Stresses in Electron Beam Welded Fracture Mechanics Specimens. International Journal of Solids and Structures, 106-107 pp. 106–118.

Kwon, J.; Goolaup, S.; Gan, W. L.; Chang, C. H.; Roy, K. and Lew, W. S. (2017). Asymmetrical domain wall propagation in bifurcated PMA wire structure due to the Dzyaloshinskii-Moriya interaction. Applied Physics Letters, 110(23), article no. 232402.

Lam, Busayawan; Zamenopoulos, Theodore; Kelemen, Mihaela and Hoo Na, Jea (2017). Unearth Hidden Assets through Community Co-design and Co-production. In: The Design Journal, Informa UK Limited, 20(sup1) S3601-S3610.

Lane, Andy (2017). The systemic implications of constructive alignment of higher education level learning outcomes and employer or professional body based competency frameworks. In: Proceedings of The Online, Open and Flexible Higher Education Conference, 25-27 October 2017, Milton Keynes, EADTU, pp. 411–426.

Lane, Andy (2017). Reframing conservation land management through systems thinking. Conservation Land Management 15 (3), British Wildlife Publishing, Totnes, UK.

Lane, Andy (2017). Open Education and the Sustainable Development Goals: Making Change Happen. Journal of Learning for Development - JL4D, 4(3) pp. 275–286.

Lane, Andy and Reynolds, Martin (2017). Systems thinking in practice: mapping complexity. In: Oreszczyn, Sue and Lane, Andy eds. Mapping environmental sustainability: reflecting on systemic practices for participatory research. Bristol: Policy Press, pp. 17–44.

Lane, Andy; Slater, Rachel and Oreszczyn, Sue (2017). Mapping muck: stakeholders' views on organic waste. In: Oreszczyn, Sue and Lane, Andy eds. Mapping environmental sustainability: reflecting on systemic practices for participatory research. Bristol: Policy Press, pp. 129–154.

Li, Sihua; Goolaup, Sarjoosing; Kwon, Jaesuk; Luo, Feilong; Gan, Weiliang and Lew, Wen Siang (2017). Deterministic Spin-Orbit Torque Induced Magnetization Reversal In Pt/[Co/Ni]n/Co/Ta Multilayer Hall Bars. Scientific reports, 7, article no. 972.

Li, Tao and Lockett, Helen (2017). An Investigation into the Interrelationship between Aircraft Systems and Final Assembly Process Design. Procedia CIRP, 60 pp. 62–67.

Lim, Sungwoo; Levin Prabhu, Vibha; Anand, Mahesh and Taylor, Lawrence (2017). Extra-terrestrial construction processes - advancements, opportunities and challenges. Advances in Space Research, 60(7) pp. 1413–1429.

Liu, Yan (2017). A Decision Tool for Supplier Selection That Takes into Account Power and Performance. PhD thesis The Open University.

Lockett, H.L. and Arvanitopoulos-Darginis, K. (2017). An Automated Maintainability Prediction Tool Integrated with Computer Aided Design. Procedia CIRP, 60 pp. 440–445.

Lockett, Helen; Ding, Jialuo; Williams, Stewart and Martina, Filomeno (2017). Design for Wire + Arc Additive Manufacture: design rules and build orientation selection. Journal of Engineering Design, 28(7-9) pp. 568–598.

López-Benítez, Miguel; Drysdale, Timothy D.; Hadfield, Simon and Maricar, Mohamed Ismaeel (2017). Prototype for multidisciplinary research in the context of the Internet of Things. Journal of Network & Computer Applications, 78 pp. 146–161.

Lotz, Nicole and Sharp, Helen (2017). The influence of cognitive style, design setting and cultural background on sketch-based ideation by novice interaction designers. The Design Journal, 20(3) pp. 333–356.

Luo, Feilong; Goolaup, Sarjoosing; Law, Wai Cheung; Li, Sihua; Tan, Funan; Engel, Christian; Zhou, Tiejun and Lew, Wen Siang (2017). Simultaneous determination of effective spin-orbit torque fields in magnetic structures with in-plane anisotropy. Physical Review B, 95, article no. 174415.

Lusher, A. L.; Welden, N. A.; Sobral, P. and Cole, M. (2017). Sampling, isolating and identifying microplastics ingested by fish and invertebrates. Analytical Methods, 9(9) pp. 1346–1360.

Mahmoodi, Nasim; Rushdi, Abduljabbar I.; Bowen, James; Sabour, Aydin; Anthony, Carl; Mendes, Paula M. and Preece, Jon A. (2017). Room temperature thermally evaporated thin Au film on Si suitable for application of thiol self-assembled monolayers in MEMS/NEMS sensors. Journal of Vacuum Science and Technology A, 35(4)

Maier, Jakob F.; Eckert, Claudia M. and Clarkson, P. John (2017). Model granularity in engineering design – concepts and framework. Design Science, 3, article no. e1.

Makatsoris, H.; Moreno, M. A.; Sheldrick, L.; Dewberry, E. and Sinclair, M. (2017). Business as Unusual: Designing products with consumers in the loop. Cranfield University.

Malamud, Florencia; Northover, Shirley; James, Jon; Northover, Peter; Nneji, Stephen and Kelleher, Joe (2017). Spatially resolved texture analysis of Napoleonic War era copper bolts. Journal of Applied Crystallography, 50(5) pp. 1–17.

Mamun, A. A.; Moat, R. J.; Kelleher, J. and Bouchard, P. J. (2017). Origin of the Bauschinger effect in a polycrystalline material. Materials Science and Engineering: A, 707 pp. 576–584.

Maniatis, Georgios; Hoey, Trevor B.; Hassan, Marwan A.; Sventek, Joseph; Hodge, Rebecca; Drysdale, Tim and Valyrakis, Manousos (2017). Calculating the Explicit Probability of Entrainment Based on Inertial Acceleration Measurements. Journal of Hydraulic Engineering, 143(4), article no. 04016097.

Marais, D.; Venter, A.; Markgraaff, J. and James, J. (2017). Sample positioning in neutron diffraction experiments using a multi-material fiducial marker. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 841 pp. 12–16.

Marino, Armando (2017). Trace Coherence: A New Operator for Polarimetric and Interferometric SAR images. IEEE Transactions on Geoscience and Remote Sensing, 55(4) pp. 2326–2339.

Mathew, J.; Moat, R. J.; Paddea, S.; Fitzpatrick, M. E. and Bouchard, P. J. (2017). Prediction of residual stresses in girth welded pipes using an artificial neural network approach. International Journal of Pressure Vessels and Piping, 150 pp. 89–95.

Mathew, J.; Moat, R.J.; Paddea, S.; Francis, J.A.; Fitzpatrick, M.E. and Bouchard, P.J. (2017). Through-Thickness Residual Stress Profiles in Austenitic Stainless Steel Welds: A Combined Experimental and Prediction Study. Metallurgical and Materials Transactions A, 48(12) pp. 6178–6191.

Matthew, George Jr.; Nuttall, William J.; Mestel, Ben and Dooley, Laurence S. (2017). A dynamic simulation of low-carbon policy influences on endogenous electricity demand in an isolated island system. Energy Policy, 109 pp. 121–131.

Matthew, George Jr. Shaundel (2017). Sustainable Low-Carbon Isolated Island Electricity Systems - Policy and Investment Impacts Assessed Using System Dynamics. PhD thesis The Open University.

Melo Rodriguez, Gabriela; Bowen, James; Grossin, David; Ben-Nissan, Besim and Stamboulis, Artemis (2017). Functionalisation of Ti6Al4V and hydroxyapatite surfaces with combined peptides based on KKLPDA and EEEEEEEE peptides. Colloids and Surfaces B: Biointerfaces, 160 pp. 154–160.

Morris, Carol and Goodyear, Alec (2017). Case Study 16: Transforming assessment practices in undergraduate engineering for distance-learning students. In: Elkington, Sam and Evans, Carol eds. Transforming Assessment in Higher Education: A Case Study Series. UK: Higher Education Academy, pp. 94–98.

Morris, Carol; Goodyear, Alec and Organ, Sally (2017). Responding to the changing HE environment: developing a sustainable engineering curriculum for part-time distance learning students. In: New Approaches to Engineering Higher Education Conference, 22 May 2017, London, UK.

Morris, Carol and Organ, Sally J. (2017). Women in Engineering at the Open University: motivations and aspirations. In: New Approaches to Engineering in Higher Education Conference, 22 May 2017, IET, London.

Naik, Jay P.; Cheneler, David; Bowen, James and Prewett, Philip D. (2017). Liquid-like behaviour of gold nanowire bridges. Applied Physics Letters, 111(7)

Neighbour, Gareth and Oraifige, Ilias eds. (2017). Thoughts and Reflections on the Use of Magnesium. Birmingham: Birmingham City University.

Nikonenko, Elena; Popova, Natalya; Koneva, Nina; Qin, Rongshan and Gromov, Victor (2017). Orientation of nickel-based alloy after thermal treatment. In: AIP Conference Proceedings (Panin, Victor E.; Psakhie, Sergey G. and Fomin, Vasily M. eds.), AIP Publishing, 1909, article no. 020148.

Nikonenko, Elena; Shergaeva, Lyubov’; Popova, Natalya; Koneva, Nina; Qin, Rongshan; Gromov, Victor and Fedorischeva, Marina (2017). Orientation and faulted structure of γ′-phases in lanthanum-alloyed Ni-Al-Cr superalloy. In: AIP Conference Proceedings, AIP Publishing, 1909, article no. 020149.

Nneji, Stephen Obiajulu (2017). Development of a Robotic Positioning and Tracking System for a Research Laboratory. PhD thesis The Open University.

Nuttall, William J. (2017). Editorial. Proceedings of the Institution of Civil Engineers - Energy, 170(4) pp. 135–136.

Nuttall, William J.; Ashley, Stephen F. and Heffron, Raphael J. (2017). Compensating for severe nuclear accidents: An expert elucidation. Process Safety and Environmental Protection, 112(A) pp. 131–142.

Nuttall, William J.; Samaras, Constantine and Bazilian, Morgan (2017). Energy and the Military: Convergence of Security, Economic, and Environmental Decision-Making. Energy Policy Research Group, Working Paper 1717, University of Cambridge.

O'Flynn, Patricia (2017). From Knowledge to Invention: Exploring User Innovation in Irish Agriculture. PhD thesis The Open University.

Omoigiade, Osamudiamen; Haldar, Arunansu and Qin, Rongshan (2017). Macroscopic Characterization of Mechanical Properties in Electric Current Treated Dry Drawn High Strength Wires. MRS Advances, 2(17) pp. 963–974.

Omoigiade, Osamudiamen; Haldar, Arunansu and Qin, Rongshan (2017). Characterisation of electric current treated austenite using misorientation angle distributions in martensite. Materials Science and Technology, 33(12) pp. 1432–1441.

Oreszczyn, Sue and Lane, Andy eds. (2017). Mapping environmental sustainability: Reflecting on systemic practices for participatory research. Bristol: Policy Press.

Oreszczyn, Sue and Lane, Andy (2017). Mapping agri-environmental knowledge systems. In: Oreszczyn, Sue and Lane, Andy eds. Mapping environmental sustainability: reflecting on systemic practices for participatory research. Bristol: Policy Press, pp. 75–102.

Oreszczyn, Sue; Levidow, Les and Wield, Dave (2017). Researching agro-environmental problems with others. In: Oreszczyn, Sue and Lane, Andy eds. Mapping environmental sustainability: reflecting on systemic practices for participatory research. Bristol: Policy Press, pp. 45–74.

Patlakas, Panagiotis; Koronaios, Georgios; Raslan, Rokia; Neighbour, Gareth and Altan, Hasim (2017). Case studies of environmental visualization. Energies, 10(10) p. 1459.

Peake, Stephen and Ekins, Paul (2017). Exploring the financial and investment implications of the Paris Agreement. Climate Policy, 17(7) pp. 832–852.

Peake, Stephen and Everett, Bob (2017). Introducing Renewable Energy. In: Peake, Stephen ed. Renewable Energy: Power for a Sustainable Future. Oxford: Oxford University Press, pp. 1–28.

Peake, Stephen and Everett, Bob (2017). Renewable Energy Futures. In: Peake, Stephen ed. Renewable Energy: Power for a Sustainable Future. Oxford: Oxford University Press, pp. 597–616.

Pearson, Richard J; Comsa, Olivia; Stefan, Liviu and Nuttall, William J (2017). Romanian Tritium for Nuclear Fusion. Fusion Science and Technology, 71(4) pp. 610–615.

Perry, R. and Robson, L. (2017). Developing a Community of Practice to Support Academics Engaging in Distributed Scholarship. In: Proceedings of the 11th International Technology, Education and Development Conference, IATED pp. 2272–2281.

Pomponi, F.; Medina Campos, L. and Moncaster, A. M. (2017). Bio inspired design: when sun and wind are there to help. In: 23rd International Sustainable Development Research Society Conference, 14-16 Jun, Bogotá, Colombia.

Pomponi, Francesco; D'Amico, Bernardino and Moncaster, Alice M. (2017). A Method to Facilitate Uncertainty Analysis in LCAs of Buildings. Energies, 10(4), article no. 524.

Pomponi, Francesco; Medina Campos, Liliana; Moncaster, Alice and Smith, Sean (2017). Bringing pupils into building energy performance: School design, construction and operation. In: Design to Thrive: Proceedings Volume 2, PLEA 2017 Conference (Brotas, Luisda; Roaf, Susan and Nicol, Fergus eds.).

Pomponi, Francesco and Moncaster, Alice (2017). Circular economy for the built environment: A research framework. Journal of Cleaner Production, 143 pp. 710–718.

Pomponi, Francesco and Moncaster, Alice (2017). Circular Economy Research in the Built Environment: A Theoretical Contribution. In: Dastbaz, Mohammad; Gorse, Chris and Moncaster, Alice eds. Building Information Modelling, Building Performance, Design and Smart Construction. Cham: Springer, pp. 31–44.

Potter, Stephen and Valdez Juarez, Alan (2017). Shifting Smart City travel information systems to the Smart Region. In: Universities Transport Study Group Annual Conference, 4-6 Jan 2017, Dublin.

Psoma, S. D.; Tzanetis, P. and Tourlidakis, A. (2017). A Practical application of energy harvesting based on piezoelectric technology for charging portable electronic devices. Materials Today: Proceedings, 4(7) pp. 6771–6785.

Qin, Rongshan (2017). Electric-field-induced alignment of electrically neutral disk-like particles: modelling and calculation. Scientific reports, 7, article no. 8449.

Qin, Rongshan (2017). Using electric current to surpass the microstructure breakup limit. Scientific Reports, 7, article no. 41451.

Qin, Rongshan; Tang, Guoyi and Gromov, Victor (2017). Manufacturing of materials using external fields. Materials Science and Technology, 33(12) pp. 1397–1398.

Rahnama, Alireza and Qin, Rongshan (2017). Room temperature texturing of austenite/ferrite steel by electropulsing. Scientific Reports(7), article no. 42732.

Ramu, M.; Goolaup, S.; Gan, W. L; Krishnia, S.; Lim, G. J. and Lew, W. S. (2017). Spin orbit torque induced asymmetric depinning of chiral Néel domain wall in Co/Ni heterostructures. Applied Physics Letters, 110(16), article no. 162402.

Reynolds, M.; Blackmore, C.; Ison, R.; Shah, R. and Wedlock, E. (2017). The role of systems thinking in the practice of implementing sustainable development goals. In: Leal Filho, Walter ed. Handbook of Sustainability Science and Research. Springer, pp. 677–698.

Reynolds, M.; Shah, R.; Wedlock, E.; Ison, R. L. and Blackmore, C. (2017). From competence to capability: learning laboratories in postgraduate pedagogy. In: 6th eSTEeM Annual Conference 2017: STEM Futures: Supporting Students to Succeed, 25-26 Apr 2017, Milton Keynes, UK.

Reynolds, Martin (2017). Evaluating diagramming as praxis. In: Oreszczyn, Sue and Lane, Andy eds. Mapping Environmental Sustainability: Reflecting on systemic practices for participatory research. University of Bristol: Policy Press, pp. 207–230.

Reynolds, Martin and Schwandt, Thomas (2017). Evaluation as public work: an ethos for professional evaluation praxis. In: UK Evaluation Society Annual Conference: The Use and Usability of Evaluation: demonstrating and improving the usefulness of evaluation, 10-11 May 2017, London, UK Evaluation Society.

Reynolds, Martin; Shah, Rupesh and van Ameijde, Jitse (2017). Framing systems thinking in practice competencies: report on systems thinking in practice competencies workshop 10 June 2017. The Open University.

Reynolds, Martin and Wilding, Helen (2017). Boundary critique: an approach for framing methodological design. In: de Savigny, Don; Blanchet, Karl and Adam, Taghreed eds. Applied Systems Thinking For Health Systems Research: A Methodological Handbook. Maidenhead: Open University Press, pp. 38–56.

Rizwan, Muhammad; Adhur Kutty, Ajith; Kgwadi, Monageng; Drysdale, Timothy D.; Sydänheimo, Lauri; Ukkonen, Leena and Virkki, Johanna (2017). Possibilities of Fabricating Copper-based RFID Tags with Photonic-sintered Inkjet Printing and Thermal Transfer Printing. IEEE Antennas and Wireless Propagation Letters, 16 pp. 1828–1831.

Robson, L. (2017). Correlation of Feedback Comments with Student Attainment on an Open University Module. In: Proceedings of the 11th International Technology, Education and Development Conference, IATED pp. 1862–1867.

Romero-Mangado, Jaione; Dey, Avishek; Diaz-Cartagena, Diana C.; Solis-Marcano, Nadja E; Lopez-Nieves, Marjorie; Santiago-Garcia, Vilynette; Nordlund, Dennis; Krishnamurthy, Satheesh; Meyyappan, M.; Koehne, Jessica E. and Gandhiraman, Ram P. (2017). Efficacy of atmospheric pressure dielectric barrier discharge for inactivating airborne pathogens. Journal of Vacuum Science and Technology A: Vacuum, Surfaces, and Films, 35(4) 041101.

Rosewell, Jon; Kear, Karen; Williams, Keith; Rodrigo, Covadonga and Sánchez-Elvira, Angeles (2017). E-xcellence methodology: lessons learned over ten years of development and implementation. In: The Online, Open and Flexible Higher Education Conference: Higher Education for the Future: Accelerating and Strengthening Innovation, 25-27 Oct 2017, The Open University, Milton Keynes.

Ruan, L. H.; Wu, K. M.; Qiu, J. A.; Shirzadi, A. A. and Rodionova, I. G. (2017). Effect of Silicon Content on Carbide Precipitation and Low-Temperature Toughness of Pressure Vessel Steels. Metal Science and Heat Treatment, 59(1-2) pp. 97–101.

Ruiu, Maria Laura; Maurizi, Sante; Sassu, Simone; Seddaiu, Giovanna; Zuin, Olga; Blackmore, Chris and Roggero, Pier Paolo (2017). Re-Staging La Rasgioni: Lessons Learned from Transforming a Traditional Form of Conflict Resolution to Engage Stakeholders in Agricultural Water Governance. Water, 9(4), article no. 297.

Russell, David and Ison, Ray (2017). Fruits of Gregory Bateson’s epistemological crisis: embodied mind-making and interactive experience in research and professional praxis. Canadian Journal of Communication, 42(3) pp. 485–514.

Sakanashi, Y.; Gungor, S.; Forsey, A. N. and Bouchard, P. J. (2017). Measurement of Creep Deformation across Welds in 316H Stainless Steel Using Digital Image Correlation. Experimental Mechanics, 57(2) pp. 231–244.

Seale, Catherine Mary (2017). Learning How To Inform Extension Practices Related To Mandatory Agri-environmental Policy. PhD thesis The Open University.

Shah, Rupesh and Reynolds, Martin (2017). Developing professional recognition of systems thinking in practice: an interim report. The Open University.

Shanmugam Ranjith, Kugalur; Raveendran Nivedita, Lalitha; Asokan, Kandasami; Krishnamurthy, Satheesh; Pandian, Ramanathaswamy; Kamruddin, Mohammed; Kumar Avasthi, Devesh and Rajendra Kumar, Ramasamy Thangavelu (2017). Robust water repellent ZnO nanorod array by Swift Heavy Ion Irradiation: Effect of Electronic Excitation Induced Local Chemical State Modification. Scientific reports, 7, article no. 3251.

Shin, H. -C.; Watts, C. W.; Whalley, W. R.; Attenborough, K. and Taherzadeh, S. (2017). Non-invasive estimation of the depth profile of soil strength with acoustic-to-seismic coupling measurement in the presence of crops. European Journal of Soil Science, 68(5) pp. 758–768.

Shin, Ho-Chul (2017). Image Conditions for Spherical-Coordinate Separation-of-Variables Acoustic Multiple Scattering Models with Perfectly-Reflecting Flat Surfaces. The Quarterly Journal of Mechanics and Applied Mathematics, 70(4) pp. 419–453.

Slater, T. J. A.; Bradley, R. S.; Bertali, G.; Geurts, R.; Northover, S. M.; Burke, M. G.; Haigh, S. J.; Burnett, T. L. and Withers, P. J. (2017). Multiscale correlative tomography: an investigation of creep cavitation in 316 stainless steel. Scientific Reports, 7(1), article no. 7332.

Subrahmanian, Eswaran; Eckert, Claudia; McMahon, Christopher and Reich, Yoram (2017). Economic development as design: Insight and guidance through the PSI framework. In: 21sr International Conference on Engineering Design (ICED 2015), 21-25 Aug 2017, Vancouver.

Summers, Joshua D.; Eckert, Claudia and Goel, Ashok (2017). Function in Engineering: Benchmarking Representations and Models. Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 31(4) pp. 401–412.

Sun, Y. L.; Roy, M. J.; Vasileiou, A. N.; Smith, M. C.; Francis, J. A. and Hosseinzadeh, F. (2017). Evaluation of Errors Associated with Cutting-Induced Plasticity in Residual Stress Measurements Using the Contour Method. Experimental Mechanics, 57(5) pp. 719–734.

Tahera, Khadija; Earl, Chris and Eckert, Claudia (2017). A Method for Improving Overlapping of Testing and Design. IEEE Transactions on Engineering Management, 64(2) pp. 179–192.

Valdez Juarez, Alan-Miguel and Valdez, Ruben (2017). Technocentric Neoliberalism and Okness - The Shaping of the City. In: Chiavi, Elena; Girao, Matilde; Garrido I Arnaiz, Pablo; Moura Veiga, Francisco; Ramos Ordonez, Francisco and Valdez, Ruben eds. On Relations in Architecture. Park Books, pp. 167–169.

Van Renterghem, Timothy; Taherzadeh, Shahram; Hornikx, Maarten and Attenborough, Keith (2017). Meteorological effects on the noise reducing performance of a low parallel wall structure. Applied Acoustics, 121 pp. 74–81.

Varagnolo, Silvia; Filippi, Daniele; Mistura, Giampaolo; Pierno, Matteo and Sbragaglia, Mauro (2017). Stretching of viscoelastic drops in steady sliding. Soft Matter, 13(17) pp. 3116–3124.

Varagnolo, Silvia; Raccanello, F.; Pierno, M.; Mistura, G.; Moffa, M.; Persano, L. and Pisignano, D. (2017). Highly sticky surfaces made by electrospun polymer nanofibers. RSC Advances, 7(10) pp. 5836–5842.

Vickers, Ian; Westall, Andrea; Spear, Roger; Brennan, Geraldine and Syrett, Stephen (2017). Cities, the social economy and inclusive growth: a practice review. Joseph Rowntree Foundation, York.

Walker, Craig (2017). Violence In The Wake Of Civil War: Investigating The Transformation Of Intergroup Relations In Nepal And Mozambique. PhD thesis The Open University.

Warren, James (2017). [Book Review] Fantasy islands: Chinese dreams and ecological fears in an age of climate crisis by Julie Sze, 2015, University of California Press. Island Studies Journal, 12(1) pp. 257–258.

Warren, James (2017). Deep Geothermal Energy. In: Peake, Stephen ed. Renewable Energy: Power for a Sustainable Future (Fourth Edition). Oxford: Oxford University Press, pp. 489–540.

Watkins, Nicholas W. (2017). On the continuing relevance of Mandelbrot’s non-ergodic fractional renewal models of 1963 to 1967. The European Physical Journal B, 90(12), article no. 241.

Welden, Natalie A. and Cowie, Phillip R. (2017). Degradation of Common Polymer Ropes in a Sublittoral Marine Environment. Marine Pollution Bulletin, 118(1-2) pp. 248–253.

Welden, Natalie A.C. and Lusher, Amy L. (2017). Impacts of Changing Ocean Circulation on the Distribution of Marine Microplastic Litter. Integrated Environmental Assessment and Management, 13(3) pp. 483–487.

Williams, Ben; Hayes, Enda; Nasir, Zaheer; Rolph, Catherine; Jackson, Simon; Khera, Shagun; Bennett, Alan; Gladding, Toni; Drew, Gillian and Tyrrel, Sean (2017). The challenges, uncertainties and opportunities of bioaerosol dispersion modelling from open composting facilities. Air Pollution XXV, 211 pp. 51–59.

Wolff, Annika; Valdez Juarez, Alan; Barker, Matthew; Potter, Stephen; Gooch, Daniel; Giles, Emilie and Miles, John (2017). Engaging with the Smart City Through Urban Data Games. In: Nijholt, Anton ed. Playable Cities: The City as a Digital Playground. Gaming Media and Social Effects (1). Springer, pp. 47–66.

Woodford, Philip and Peake, Stephen (2017). The Hero Who Overslept. Fringe Management Ltd, Edinburgh.

Wynn, David C. and Eckert, Claudia M. (2017). Perspectives on iteration in design and development. Research in Engineering Design, 28(2) pp. 153–184.

Zhang, Xinfang and Qin, Rongshan (2017). Separation of electrically neutral non-metallic inclusions from molten steel by pulsed electric current. Materials Science and Technology, 33(12) pp. 1399–1403.

Zhao, Y.; Ma, M.T.; Qin, R.; Ling, Y.C; Wang, G.Y; Wan, X.M; Gu, H.R and Liu, Y.G. (2017). A fabrication history based strain-fatigue model for prediction of crack initiation in a radial loading wheel. Fatigue and Fracture of Engineering Materials and Structures, 40(11) pp. 1882–1892.

Zhao, Z. C. and Qin, R. S. (2017). Inclusion agglomeration in electrified molten metal: thermodynamic consideration. Materials Science and Technology, 33(12) pp. 1404–1410.

Zhao, Z. C. and Qin, R. S. (2017). Morphology and Orientation Selection of Non-Metallic Inclusions in Electrified Molten Metal. Metallurgical and Materials Transactions B, 48(5) pp. 2781–2787.

2016To Top

Lundgaard Andersen, Linda; Gawell, Malin and Spear, Roger eds. (2016). Social Entrepreneurship: A Nordic Perspective. Routledge Studies in Social Enterprise and Social Innovation. Abingdon: Routledge.

Alevizou, Giota; Alexiou, Katerina; Harte, Dave; Sobers, Shawn; Zamenopoulos, Theodore and Turner, Jerome (2016). Civic cultures and modalities of place-making. In: Hargreaves, Ian and Hartley, John eds. The creative citizen unbound: How social media and DIY culture contribute to democracy, communities and the creative economy. Bristol: Policy Press, pp. 205–230.

Alevizou, Giota; Alexiou, Katerina and Zamenopoulos, Theo (2016). Making sense of assets: Community asset mapping and related approaches for cultivating capacities. The Open University and AHRC.

Alexandrova, Assia; Rapanotti, Lucia and Horrocks, Ivan (2016). RE-PROVO: an evaluation of gamification in a law enforcement organization. In: Proceedings of the Workshop on Fictional Game Elements 2016 (Rapp, Amon; Cena, Federica; Hopfgartner, Frank; Hamari, Juho and Linehan, Conor eds.), Austin, Texas.

Alexiou, Katerina; Aguista, Emma; Alevizou, Giota; Chapain, Caroline; Greene, Catherine; Harte, Dave; Ramster, Gail and Zamenopoulos, Theodore (2016). Asset mapping and civic creativity. In: Hargreaves, Ian and Hartley, John eds. The creative citizen unbound: How social media and DIY culture contribute to democracy, communities and the creative economy. Bristol: Policy Press, pp. 181–204.

Amado, Franco D.R and Krishnamurthy, Satheesh (2016). Synthesis and characterisation of polyaniline (PAni) membranes for fuel cell. Advanced Materials Letters, 7(9) pp. 719–722.

Ashley, Stephen F.; Nuttall, William J. and Heffron, Raphael J. (2016). The present status of nuclear third-party liability and nuclear insurance. In: Heffron, Raphael J. and Little, Gavin F. M. eds. Delivering energy law and policy in the EU and the US: A reader. Edinburgh: Edinburgh University Press, pp. 251–255.

Attenborough, Keith; Bashir, Imran and Taherzadeh, Shahram (2016). Exploiting ground effects for surface transport noise abatement. Noise Mapping, 3(1), article no. 1.

Attenborough, Keith and Taherzadeh, Shahram (2016). Sound propagation through forests and tree belts. In: Proceedings of the Institute of Acoustics, 38(1) pp. 114–125.

Bachmair, Sophie; Stahl, Kerstin; Collins, Kevin; Hannaford, Jamie; Acreman, Mike; Svoboda, Mark; Knutson, Cody; Helm Smith, Kelly; Wall, Nicole; Fuchs, Brian; Crossman, Neville and Overton, Ian C. (2016). Drought indicators revisited: the need for a wider consideration of environment and society. WIREs Water, 3(4) pp. 516–536.

Bakenne, Adetokunboh; Nuttall, William and Kazantzis, Nikolaos (2016). Sankey-Diagram-based insights into the hydrogen economy of today. International Journal of Hydrogen Energy, 41(19) pp. 7744–7753.

Behray, Mehrnaz; Webster, Carl A.; Pereira, Sara; Ghosh, Paheli; Krishnamurthy, Satheesh; Al-Jamal, Wafa T and Chao, Yimin (2016). Synthesis of Diagnostic Silicon Nanoparticles for Targeted Delivery of Thiourea to Epidermal Growth Factor Receptor-Expressing Cancer Cells. ACS Applied Materials and Interfaces, 8(14) pp. 8908–8917.

Bell, Simon; Berg, Tessa and Morse, Stephen (2016). Rich Pictures: Sustainable Development and Stakeholders – The Benefits of Content Analysis. Sustainable Development, 24(2) pp. 136–148.

Bell, Simon; Berg, Tessa and Morse, Stephen (2016). Rich Pictures: Encouraging Resilient Communities. Earthscan Tools for Community Planning. London: Routledge.

Bell, Simon; Gillespie, Marie and Wilding, Colin (2016). Rethinking Models of Evaluation: Sustainability as the Goal of International Cultural Organisations. In: International Sustainable Development Research Conference, 13-15 Jul 2016, Lisbon, Portugal.

Berardi, Andrea (2016). Book review of 'Amazonian Roots: Indigenous Mobility and Colonial Communities in Northern Brazil' by Roller, Heather. Bulletin of Latin American Research, 35(2) pp. 250–252.

Berry, David; Taherzadeh, Shahram; Stronach, Alexander and Attenborough, Keith (2016). Acoustic propagation over periodic and quasi-periodic rough surfaces. In: Proceedings of the Institute of Acoustics, 38(1) pp. 126–132.

Bignante, Elisa; Mistry, Jayalaxshmi; Berardi, Andrea and Tschirhart, Céline (2016). Feeling and acting ‘different’ emotions and shifting self-perceptions whilst facilitating a participatory video process. Emotion, Space and Society, 21 pp. 5–12.

Birdi-Chouhan, G.; Shelton, R. M.; Bowen, J.; Goldberg-Oppenheimer, P.; Page, S. J.; Hanna, J. V.; Peacock, A.; Wright, A.J. and Grover, L. M. (2016). Soluble silicon patterns and templates: calcium phosphate nanocrystal deposition in collagen type 1. RSC Advances, 102(6) pp. 99809–99815.

Birgisdottir, Harpa; Houlihan Wiberg, Aoife; Malmqvist, Tove; Moncaster, Alice and Nygaard Rasmussen, Freja (2016). Evaluation of Embodied Energy and CO2eq for Building Construction (Annex 57). Subtask 4: Case Studies and Recommendations for the Reduction of Embodied Energy and Embodied Greenhouse Gas Emissions from Buildings. International Energy Agency EBC.

Birgisdottir, Harpa; Houlihan Wiberg, Aoife; Malmqvist, Tove; Moncaster, Alice and Nygaard Rasmussen, Freja (2016). Evaluation of Embodied Energy and GHG Emissions for Building Construction (Annex 57). Case studies demonstrating Embodied Energy and Embodied Greenhouse Gas Emissions in buildings. International Energy Agency EBC.

Birgisdottir, Harpa; Houlihan Wiberg, Aoife; Malmqvist, Tove; Moncaster, Alice and Nygaard Rasmussen, Freja (2016). Strategies for Reducing Embodied Energy and Embodied GHG Emissions. Guideline for Designers and Consultants - Part 2. IEA EBC Annex 57. Institute for Building Environment and Energy Conservation.

Blackmore, Chris and Ison, Ray (2016). Transforming to Sustainable Futures: Learning From 45 Years of Systems Thinking In Practice Pedagogy. In: 60th Annual Meeting of the International Society for the Systems Sciences (ISSS), 23-30 Jul 2016, Boulder, Colorado.

Blackmore, Chris; van Bommel, Severine; de Bruin, Annemarieke; de Vries, Jasper; Westberg, Lotten; Powell, Niel; Foster, Natalie; Collins, Kevin; Roggero, Pier Paolo and Seddaiu, Giovanna (2016). Learning for Transformation of Water Governance: Reflections on Design from the Climate Change Adaptation and Water Governance (CADWAGO) Project. Water, 8(11), article no. 510.

Bowen, Alan G.; Frommhold, Andreas; Lada, Tom; Bowen, J.; el Otell, Z. and Robinson, Alex P. G. (2016). Spin-on-carbon hard masks utilising fullerene derivatives. In: Proc. SPIE 9779, Advances in Patterning Materials and Processes XXXIII.

Bowen, James and Cheneler, David (2016). On the origin and magnitude of surface stresses due to metal nanofilms. Nanoscale, 8 pp. 4245–4251.

Bowen, James; Johnson, Simon A.; Avery, Andrew R. and Adams, Michael J. (2016). Friction and wear of human hair fibres. Surface Topography: Metrology and properties, 4, article no. 024008.

Bowen, James; Rossetto, Hebert L. and Kendall, Kevin (2016). Adhesion between silica surfaces due to hydrogen bonding. Surface Topography: Metrology and Properties, 4(3) 034001.

Bravo, Úrsula; Cortés, Catalina; Honorato, María Jesús; Rivera, Maritza; Ceric, Fransisco; Lloyd, Peter and Jones, Derek (2016). El diseño va al colegio: Oportunidades de Aplicación del Proceso de Diseño en la Educación Escolar Chilena [Design goes to school: Opportunities to apply the design process in Chilean school education]. Base : Diseño para la Educación del Siglo Xxi(2) pp. 228–241.

Bujokas de Siqueira, Alexandra; Berardi, Andrea; Mistry, Jayalaxshmi and Rothberg, Danilo (2016). Experimenting with Media Education, Civic Engagement, and Sustainability in Brazilian Schools. In: Robinson, Laura; Schulz, Jeremy and Dunn, Hopeton S. eds. Communication and Information Technologies Annual: Digital Empowerment: Opportunities and Challenges of Inclusion in Latin America and the Caribbean. Studies in Media and Communications, 12. Emerald Group Publishing Limited.

Burnley, Stephen and Coleman, Terry (2016). The environmental and financial benefits of recovering plastics From residual municipal waste before energy recovery. In: Venice 2016 - Sixth International Symposium on Energy from Biomass and Waste. Proceedings, CISA Publisher, Padova.

Buys, Kurijn; Sharp, David and Laney, Robin (2016). Sustained and attack sounds of the hybrid instrument evaluation, along with simulations. Mouthpiece pressure and external pressures. The Open University. https://doi.org/10.21954/ou.rd.3848415.v1

Buys, Kurijn; Sharp, David and Laney, Robin (2016). Improving the stability of a hybrid wind instrument using two microphones. In: Proceedings of the International Symposium on Musical and Room Acoustics (Miyara, Federico ed.), Asociación de Acústicos Argentinos, AdAA, Buenos Aires.

Caird, S. with Hudson, L. and Kortuem, G. (2016) A Tale of Evaluation and Reporting in UK Smart Cities. 53pp. The Open University, UK.

Castan Broto, Vanesa and Dewberry, Emma (2016). Economic crisis and social learning for the provision of public services in two Spanish municipalities. Journal of Cleaner Production, 112(4) pp. 3018–3027.

Collins, K.; Hannaford, J.; Haines, S.; Bachmair, S.; Crossman, N.; Stephens, L. and Svoboda, M. (2016). Drought: Understanding and reducing vulnerability through monitoring and early warning systems. Report of the DrIVER workshop, 17 March 2015. DrIVER project report, Wallingford, UK.

Collins, Kevin; Hannaford, Jamie; Svoboda, Mark; Knutson, Cody; Wall, Nicole; Bernadt, Tonya; Crossman, Neville; Overton, Ian; Acreman, Mike; Bachmair, Sophie and Stahl, Kerstin (2016). Stakeholder Co-inquiries on Drought Impacts, Monitoring and Early Warning Systems. Bulletin of the American Meteorological Society, 97(11) ES217-ES220.

Das, Yadunandan B.; Forsey, Alexander N.; Simm, Thomas H.; Perkins, Karen M.; Fitzpatrick, Michael E.; Gungor, Salih and Moat, Richard J. (2016). In situ observation of strain and phase transformation in plastically deformed 301 austenitic stainless steel. Materials & Design, 112 pp. 107–116.

De Wolf, Catherine; Pomponi, Francesco and Moncaster, Alice (2016). Implementing Whole Life Carbon in Buildings. In: Industrial Ecology and Green Transformation ISIE America 2016, 25-27 May 2016, Bogata, Colombia.

Dewberry, E. L.; Saca, L.; Moreno, M.; Sheldrick, L.; Sinclair, M.; Makatsoris, C. and Charter, M. (2016). A landscape of repair. In: Proceedings of the Sustainable Innovation 2016. Circular Economy Innovation and Design., Towards Sustainable Product Design, The Centre for Sustainable Design, University of the Creative Arts, Epsom, Surrey, UK, pp. 76–85.

Dey, A.; Chroneos, A.; Braithwaite, N. St. J.; Gandhiraman, Ram P. and Krishnamurthy, S. (2016). Plasma engineering of graphene. Applied Physics Reviews, 3(2), article no. 021301.

Dune, Richard (2016). Evaluating Evaluations of Clinical Decision Support Systems: Case Studies From NHS Clinical Settings. PhD thesis The Open University.

Eckert, Claudia and Jankovic, Marija (2016). System architecture design. Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 30 pp. 214–216.

Elliott-Bowman, Bernadette; Cook, Alexander C.; Brown, Peter; Dye, David and Qin, Rongshan (2016). Altering the Microstructure of Pearlitic Steel Using Pulsed Electric Current. Advanced Materials Research, 1139 pp. 3–6.

Fitton, S. L.; Moncaster, A. and Guthrie, P. (2016). Investigating the social value of the Ripon rivers flood alleviation scheme. Journal of Flood Risk Management, 9(4) pp. 370–378.

Forsey, A. and Gungor, S. (2016). Demosaicing images from colour cameras for digital image correlation. Optics and lasers in engineering, 86 pp. 20–28.

Foster, N.; Blackmore, C. P.; Ison, R. L. and Collins, K. B. (2016). Renegotiating boundaries for systemic water governance: some experiences from the implementation of the Water Framework Directive in England. In: 12th European IFSA Symposium - Social and technological transformation of farming systems: Diverging and converging pathways, 12-16 Jul 2016, Harper Adams University, Newport, UK.

Foster, Natalie; Collins, Kevin; Ison, Ray and Blackmore, Chris (2016). Water Governance in England: Improving Understandings and Practices through Systemic Co-Inquiry. Water, 5, article no. 540.

Gaved, Mark; Dallison, Delphine; Jowers, Iestyn; Elliott-Cirigottis, Gary; Craig, Mark and Rochead, Alan (2016). RE:FORM - Reimagining Education for the Future Of Redistributed Manufacturing. In: Papadimitriou, Irini; Prescott, Andrew and Rogers, Jon eds. Engineering the Future: as part of the V&A Digital Design Weekend 2016. United Kingdom: Uniform Communications Limited, pp. 49–53.

Gaved, Mark; Jowers, Iestyn; Dallison, Delphine; Elliott-Cirigottis, Gary; Rochead, Alan and Craig, Mark (2016). Online distributed prototyping through a university-makerspace collaboration. In: FabLearn Europe 2016, 19-20 Jun 2016, Preston, Lancashire, UK.

Gericke, K.; Eckert, C.M. and Wynn, D. (2016). Towards a Framework of Choices Made During the Lifecycles of Process Models. In: DS84: Proceedings of the DESIGN 2016 14th International Design Conference, pp. 1275–1284.

Ghosh, P.; Sundaram, S.; Nixon, T. and Krishnamurthy, S. (2016). Influence of Nanostructures in Perovskite Solar Cells. In: Hashmi, M.S.J. ed. Reference Module in Materials Science and Materials Engineering. Elsevier.

Golrokhi, Zahra; Potter, Richard; Chalker, Sophia and Sutcliffe, Christopher (2016). Self-limiting atomic layer deposition of conformal nanostructured silver films. Applied Surface Science, 364 pp. 789–797.

Green, Catherine; Sobers, Shawn; Zamenopoulos, Theodore; Chapain, Caroline and Turner, Jerome (2016). Conversations about co-production. In: Hargreaves, Ian and Hartley, John eds. The creative citizen unbound: How social media and DIY culture contribute to democracy, communities and the creative economy. Bristol: Policy Press, pp. 153–181.

Gupta, Saatviki; Whittles, Thomas J.; Batra, Yogita; Satsangi, Vibha; Krishnamurthy, Satheesh; Dhanak, Vinod R. and Mehta, Bodh Raj (2016). A low-cost, sulfurization free approach to control optical and electronic properties of Cu2ZnSnS4 via precursor variation. Solar Energy Materials and Solar Cells, 157 pp. 820–830.

Haigh, R.D.; Hutchings, Michael; Fitzpatrick, M.E..; James, J.A.; Okido, S.; Mizuno, R.; Ogawa, K. and Hughes, D.J. (2016). Residual stress characterization of single and triple-pass autogenously welded stainless steel pipes. International Journal of Pressure Vessels and Piping, 144 pp. 1–10.

Hall, A.; Carberry, P.; Djikeng, A.; Roy-Macauley, H.; Pengelly, B.; Njoya, A.; Ndungu, L.; Kollo, I.; Bruce, C.; McMillan, L.; Ison, R. and Keating, B. (2016). The Journey to R4D: An institutional history of an Australian Initiative on Food Security in Africa. In: ed. Innovation Systems: Towards Effective Strategies in support of Smallholder Farmers. Wageningen: Technical Centre for Agricultural and Rural Cooperation (CTA) and Wageningen University and Research (WUR)/Convergence of Sciences-Strengthening Innovation Systems (CoS-SIS), pp. 183–201.

Harding, John Edwin; Luck, Rachael and Dalton, Nicholas (2016). Journeys in the City: Empathising With the Users of Transport Buildings. In: Proceedings of the ID@50 Integrated Design Conference 2016 (Emmitt, Stephen and Adeyeye, Kemi eds.), University of Bath, Bath, pp. 324–335.

Harte, David; Dovey, John; Aguista, Emma and Zamenopoulos, Theodore (2016). From networks to complexity: two case studies. In: Hargreaves, Ian and Hartley, John eds. The creative citizen unbound: How social media and DIY culture contribute to democracy, communities and the creative economy. Bristol: Policy Press, pp. 129–152.

Heffron, Raphael J.; Ashley, Stephen F. and Nuttall, William J. (2016). The global nuclear liability regime post Fukushima Daiichi. Progress in Nuclear Energy, 90 pp. 1–10.

Higgison, Douglas and Neighbour, Gareth B (2016). Creating an Integrated Curriculum for a STEM Discipline. In: New Perspective in Science Education, libreriauniversitaria, Florence, Italy, pp. 20–26.

Hosseinzadeh, F.; Traore, Y.; Bouchard, P. J. and Muransky, O. (2016). Mitigating cutting-induced plasticity in the contour method, part 1: Experimental. International Journal of Solids and Structures, 94-95 pp. 247–253.

Huang, G.; Wan, X. L.; Wu, K. M.; Isayev, O.; Hress, O.; Rodionova, I. and Shirzadi, A. A. (2016). Effect of Cu addition on microstructure and impact toughness in the simulated coarse-grained heat-affected zone of high-strength low-alloy steels. Materials Science and Technology, 33(5) pp. 602–614.

Ison, R. L. (2016). Modelling praxis, social learning and systemic governance, Session K26 “Integrated Modelling of the human-nature system co-evolution and the interactions between different components of the human-nature system”. In: International Geographical Congress, 21-25 Aug 2016, Beijing.

Ison, R. L. (2016). Transforming nature-society relations through innovations in research praxis: a coevolutionary systems approach. In: Hubert, Bernard and Mathieu, Nicole eds. Interdisciplinarités entre Natures et Sociétés: Colloque de Cerisy. EcoPolis, 26. Bruxelles: Peter Lang, pp. 47–70.

Ison, Ray (2016). Relational policy design and enactment: exploring intersections with cybersystemic praxis traditions. In: 10th ECPR General Conference, 7-10 Sep 2016, Prague.

Ison, Ray (2016). Governing in the Anthropocene: What Future Systems Thinking in Practice? Systems Research and Behavioral Science, 33(5) pp. 595–613.

Ison, Ray (2016). What is Systemic about Innovation Systems? The Implications for Policies. Governance and Institutionalization. In: Francis, J.; Mytelka, L.; van Huis, A. and Röling, N. eds. Innovation Systems: Towards Effective Strategies in support of Smallholder Farmers. Wageningen: Technical Centre for Agricultural and Rural Cooperation (CTA) and Wageningen University and Research (WUR)/Convergence of Sciences-Strengthening Innovation Systems (CoS-SIS), pp. 37–52.

Ison, Ray and Shelley, Monica (2016). Governing in the Anthropocene: Contributions from Systems Thinking in Practice? Systems Research and Behavioral Science, 33(5) pp. 589–594.

Jankovic, Marija and Eckert, Claudia (2016). Architecture decisions in different product classes for complex products. Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 30 pp. 217–234.

Jazaeri, H.; Bouchard, P. J.; Hutchings, Michael; Mamun, A. A. and Heenan, R. K. (2016). Study of cavities in a creep crack growth test specimen. Procedia Structural Integrity, 2 pp. 942–949.

Jiggins, Janice; Blackmore, Chris; Ison, Ray and Röling, Niels (2016). The governance of farming and natural resource management. Outlook on Agriculture, 45(4) pp. 217–219.

Johnson, Hazel; Borda-Rodriguez, Alexander; Shaw, Linda and Vicari, Sara (2016). What makes rural co-operatives resilient in developing countries? Journal of International Development, 28(1) pp. 89–111.

Johnson, J.H. (2016). Hypernetworks: Multidimensional relationships in multilevel systems. European Physical Journal Special Topics, 225(6) pp. 1037–1052.

Johnson, Jeffrey H. (2016). Embracing n-ary Relations in Network Science. In: Wierzbicki, Adam; Brandes, Ulrik; Schweitzer, Frank and Pedreschi, Dino eds. Advances in Network Science: 12th International Conference and School, NetSci-X 2016, Wroclaw, Poland, January 11-13, 2016, Proceedings. Lecture Notes in Computer Science (9564). Switzerland: Springer, pp. 147–160.

Jones, D.A. and Eckert, C.M. (2016). Design Margins: Impact on Building Energy Performance. In: DS84: Proceedings of the DESIGN 2016 14th International Design Conference, pp. 1295–1304.

Jones, Derek; Plowright, Philip; Bachman, Leonard and Poldma, Tiiu (2016). Introduction: Design Epistemology. In: DRS2016 Proceedings (Lloyd, Peter and Bohemia, Erik eds.), Design Research Society, London, 1 pp. 295–302.

Jones, Mark H. and Gallen, Anne-Marie (2016). Peer observation, feedback and reflection for development of practice in synchronous online teaching. Innovations in Education and Teaching International, 53(6) pp. 616–626.

Jowers, Iestyn; Gaved, Mark; Elliott-Cirigottis, Gary; Dallison, Delphine; Rochead, Alan and Craig, Mark (2016). Communication is not collaboration: observations from a case study in collaborative learning. In: Proceedings of DRS 2016, Design Research Society 50th Anniversary Conference (Lloyd, Peter and Bohemia, Erik eds.), Brighton, UK, pp. 609–624.

Judt, D.; Forster, K.; Lockett, H.; Lawson, C. and Webb, P. (2016). Aircraft Wing Build Philosophy Change through System Pre-Equipping of Major Components. SAE International Journal of Aerospace, 9(1) pp. 190–197.

Kartal, M.E.; Kang, Y-H.; Korsunsky, A.M.; Cocks, A.C.F. and Bouchard, J. P. (2016). The influence of welding procedure and plate geometry on residual stresses in thick components. International Journal of Solids and Structures, 80 pp. 420–429.

Kear, Karen; Jones, Allan; Holden, Georgina and Curcher, Mark (2016). Social technologies for online learning: theoretical and contextual issues. Open Learning: The Journal of Open, Distance and e-Learning, 31(1) pp. 42–53.

Kear, Karen; Rosewell, Jon; Williams, Keith; Ossiannilsson, Ebba; Rodrigo, Covadonga; Sánchez-Elvira Paniagua, Ángeles; Santamaría Lancho, Miguel; Vyt, André and Mellar, Harvey (2016). Quality Assessment for E-learning: a Benchmarking Approach (Third edition). Maastricht: European Association of Distance Teaching Universities.

Kgwadi, M. and Drysdale, T. D. (2016). Diode-switched thermal-transfer printed antenna on flexible substrate. Electronics Letters, 52(4) pp. 258–260.

Kgwadi, Monageng; Rizwan, Muhammad; Adhur Kutty, Ajith; Virkki, Johanna; Ukkonen, Leena and Drysdale, Timothy D. (2016). Performance comparison of inkjet and thermal transfer printed passive ultra-high-frequency radio-frequency identification tags. IET Microwaves, Antennas & Propagation, 10(14) pp. 1507–1514.

Kumar, Fidal; Inguva, Saikumar; Krishnamurthy, Satheesh; Marsili, Enrico; Mosnier, Jean-Paul and Sainathan, Chandra (2016). Mediator-free interaction of glucose oxidase, as model enzyme for immobilization, with Al-doped and undoped ZnO thin films laser-deposited on polycarbonate supports. Enzyme and Microbial Technology (In Press).

Lane, Andrew (2016). Systems diagramming and modelling. In: Bhodya, Shamim ed. Large Scale Systemic Change: Theories, Modelling and Practices. Business Economics in a Rapidly-Changing World. New York: Nova Science Publishers, pp. 243–260.

Lane, Andrew (2016). Emancipation through Open Education: Rhetoric or Reality? In: Blessinger, Patrick and Bliss, TJ eds. Open Education: International Perspectives in Higher Education. Open Book Publishers, pp. 31–50.

Langendahl, Per-Anders; Cook, Matthew and Potter, Stephen (2016). Sustainable innovation journeys: exploring the dynamics of firm practices as part of transitions to more sustainable food and farming. Local Environment, 21(1) pp. 105–123.

Langendahl, Per-Anders; Cook, Matthew; Potter, Stephen; Roby, Helen and Collins, Trevor (2016). Governing effective and legitimate smart grid developments. Proceedings of the Institution of Civil Engineers – Energy, 169(3) pp. 102–109.

Lebjioui, S.; Eckert, C. M. and Earl, C. (2016). Understanding the relationship between design margins and trade-offs. In: Proceedings of the DESIGN 2016 14th International Design Conference (Marjanović, D.; Štorga, M.; Pavković, N.; Bojčetić, N. and Škec, S. eds.), pp. 1515–1522.

Leo, José Rodolpho de Oliveira (2016). Creep and anelasticity of conventional and ODS steels. PhD thesis The Open University.

Li, Y.; Wan, X. L.; Lu, W. Y.; Shirzadi, A. A.; Isayev, O.; Hress, O. and Wu, K. M. (2016). Effect of Zr-Ti combined deoxidation on the microstructure and mechanical properties of high-strength low-alloy steels. Materials Science and Engineering: A, 659 pp. 179–187.

Lu, W.J. and Qin, R.S. (2016). Influence of κ-carbide interface structure on the formability of lightweight steels. Materials & Design, 104 pp. 211–216.

Lu, Wenjun and Qin, Rongshan (2016). Stability of martensite with pulsed electric current in dual-phase steels. Materials Science and Engineering A, 677 pp. 252–258.

Luck, Rachael (2016). What is it about space that is important in interaction? … Let’s take the world from a situated point of view. In: Dalton, Nicholas S.; Schnädelbach, Holger; Wiberg, Mikael and Varoudis, Tasos eds. Architecture and Interaction: Human Computer Interaction in Space and Place. Human - Computer Interaction Series. Springer, pp. 37–52.

Lungare, Shital; Bowen, James and Badhan, Raj (2016). Development and Evaluation of a Novel Intranasal Spray for the Delivery of Amantadine. Journal of Pharmaceutical Sciences, 105(3) pp. 1209–1220.

MacLachlan, Lynne and Jowers, Iestyn (2016). Exploration of multi-material surfaces as weighted shapes. Graphical Models, 83 pp. 28–36.

Mahroum, Sami; Bell, Simon; Al-Saleh, Yasser and Yassin, Nasser (2016). Towards an Effective Multi-Stakeholder Consultation Process: Applying the Imagine Method in Context of Abu Dhabi’s Education Policy. Systemic Practice and Action Research, 29(4) pp. 335–353.

Maier, J. F.; Eckert, C. M. and Clarkson, P. J. (2016). Model granularity and related concepts. In: Proceedings of the DESIGN 2016 14th International Design Conference (Marjanović, D.; Štorga, M.; Pavković, N.; Bojčetić, N. and Škec, S. eds.), pp. 1327–1336.

Malamud, Florencia; Northover, Shirley; James, Jon; Northover, Peter and Kelleher, Joe (2016). Texture analysis of Napoleonic War Era copper bolts. Applied Physics A: Materials Science & Processing, 122(276) pp. 1–12.

Malik, Salman A.; Ng, Wing H.; Bowen, James; Tang, Justin; Gomez, Alessandro; Kenyon, Anthony J. and Day, Richard M. (2016). Electrospray synthesis and properties of hierarchically structured PLGA TI PS microspheres for use as controlled release technologies. Journal of Colloid and Interface Science, 467 pp. 220–229.

Marino, Armando; Dierking, Wolfgang and Christine, Wesche (2016). A Depolarization Ratio Anomaly Detector to identify icebergs in sea ice using dual-polarization SAR images. IEEE Transactions on Geoscience and Remote Sensing, 54(9) pp. 5602–5615.

Matthew, George; Nuttall, William J.; Mestel, Ben; Dooley, Laurence and Ferrão, Paulo Manuel (2016). Renewable Integration in Island Electricity Systems – A System Dynamics Assessment. In: Complex Systems Design & Management Asia, Advances in Intelligent Systems and Computing, Springer International Publishing, Switzerland, pp. 107–119.

McGilp, H.; Eckert, C. and Earl, C. (2016). Don’t Look Back: The Paradoxical Role of Recording in the Fashion Design Process. In: Proceedings of DRS2016: Design + Research + Society - Future-Focused Thinking (Lloyd, P. and Bohemia, E. eds.), Design Research Society, London, pp. 2521–2534.

Mehrban, N. and Bowen, J. (2016). Monitoring biomineralization of biomaterials in vivo. In: Narayan, Roger J. ed. Monitoring and Evaluation of Biomaterials and their Performance In Vivo. Woodhead Publishing Series in Biomaterials. Elsevier, pp. 81–110.

Mehta, Manan; Kodan, Nisha; Kumar, Sandeep; Mayrhofer, Leonard; Walter, Michael; Mosler, Michael; Dey, Avishek; Krishnamurthy, Satheesh; Basu, Suddhasatwa and Singh, Aadesh P. (2016). Hydrogen Treated Anatase TiO2: A New Experimental Approach and Further Insights from Theory. Journal of Materials Chemistry A, 4(7) pp. 2670–2681.

Mifsud, Lara; Pomponi, Francesco and Moncaster, Alice M. (2016). Comparative energy and comfort analysis of façade passive strategies in the Mediterranean region. In: Engineered Transparency 2016: Glass in Architecture and Structural Engineering (Weller, Bernhard and Schneider, Jens eds.), Wiley, pp. 161–174.

Milne, Andrew J.; Laney, Robin and Sharp, David B. (2016). Testing a Spectral Model of Tonal Affinity with Microtonal Melodies and Inharmonic Spectra. Musicae Scientiae, 20(4) pp. 465–494.

Mistry, Jayalaxshmi and Berardi, Andrea (2016). Bridging indigenous and scientific knowledge. Science, 352(6291) pp. 1274–1275.

Mistry, Jayalaxshmi; Berardi, Andrea; Tschirhart, Céline; Bignante, Elisa; Haynes, Lakeram; Benjamin, Ryan; Albert, Grace; Xavier, Rebecca; Robertson, Bernie; Davis, Odacy; Jafferally, Deirdre and de Ville, Géraud (2016). Community owned solutions: identifying local best practices for social-ecological sustainability. Ecology and Society, 21(2), article no. 42.

Mistry, Jayalaxshmi; Bignante, Elisa and Berardi, Andrea (2016). Why are we doing it? Exploring participant motivations within a participatory video project. Area, 48(4) pp. 412–418.

Mistry, Jayalaxshmi; Bilbao, Bibiana and Berardi, Andrea (2016). Community owned solutions for fire management in tropical ecosystems: case studies from Indigenous communities of South America. Philosophical Transactions of the Royal Society B: Biological Sciences, 371(1696), article no. 20150174.

Moullec, Marie-Lise; Jankovic, Marija and Eckert, Claudia (2016). Selecting system architecture: What a single industrial experiment can tell us about the traps to avoid when choosing selection criteria. Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 30 pp. 250–262.

Muransky, O.; Hamelin, C. J.; Hosseinzadeh, F. and Prime, M. B. (2016). Mitigating Cutting-Induced Plasticity in the Contour Method, Part 2: Numerical Analysis. International Journal of Solids and Structures, 94-95 pp. 254–262.

Naveed, Nida (2016). Improving the Spatial Resolution of the Contour Method. PhD thesis The Open University.

Nneji, S. O.; Zhang, S. Y.; Kabra, S.; Moat, R. J. and James, J. A. (2016). Modelling and control of neutron and synchrotron beamline positioning systems. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 813 pp. 123–131.

Nuttall, William; Glowacki, Bartek and Krishnamurthy, Satheesh (2016). Next Steps for Hydrogen - physics, technology and the future. Institute of Physics, London.

Perumal, Bama; Rist, Martin A.; Gungor, Salih; Brooks, Jeffery W. and Fitzpatrick, Michael E. (2016). The Effect of Hot Deformation Parameters on Microstructure Evolution of the α-Phase in Ti-6Al-4V. Metallurgical and Materials Transactions A, 47(8) pp. 4128–4136.

Pomponi, F and Moncaster, Alice (2016). Reducing Embodied Carbon in the Built Environment: A Research Agenda. In: International Conference on Sustainable Ecological Engineering Design for Society, 14-15 Sep 2016, Leeds Beckett University, UK.

Pomponi, F.; Medina Campos, L. and Moncaster, A. (2016). The cultural dimension of industrial ecology education: success story of a sustainable integrated curriculum in Chia, Columbia. In: Industrial Ecology and Green Transformation ISIE America 2016, 25-27 May 2016.

Pomponi, F. and Moncaster, A. (2016). Benefits and challenges of visualising embodied and whole life carbon of buildings. In: International Conference on Sustainable Ecological Engineering Design for Society, 14-15 Sep 2016, Leeds Beckett University, UK.

Pomponi, F. and Moncaster, A. (2016). Double Skin Façades: Life Cycle Study of a Versatile Technology for the Sustainable Refurbishment of Non-domestic Buildings. In: CESB 2016 - Central Europe Towards Sustainable Building 2016: Innovations for Sustainable Future (Sojkova, K.; Tywoniak, J.; Lupisek, A. and Hajek, P. eds.), Grada, pp. 261–268.

Pomponi, Francesco and Moncaster, Alice (2016). Circular Economy Research in the Built Environment: A Theoretical Contribution. In: International Conference on Sustainable Ecological Engineering Design for Society, 14-15 Sep 2016, Leeds Beckett University, UK.

Pomponi, Francesco and Moncaster, Alice (2016). Embodied carbon mitigation and reduction in the built environment: what does the evidence say? Journal of Environmental Management, 181 pp. 687–700.

Pomponi, Francesco and Moncaster, Alice (2016). Buildings for the biosphere (and their indoors for the technosphere) - A circular economy view for the construction industry. In: Industrial Ecology and Green Transformation ISIE America 2016, 25-27 May 2016, Bogata, Colombia.

Pomponi, Francesco; Piroozfar, Poorang A.E. and Moncaster, Alice (2016). Shortcomings of LCA current practice: the risk of mean values. In: Industrial Ecology and Green Transformation ISIE America 2016, 25-27 May 2016, Bogata, Colombia.

Potter, Stephen and Enoch, Marcus (2016). Paratransit: the need for a regulatory revolution in the light of institutional inertia. In: Mulley, Corinne and Nelson, John eds. Paratransit: shaping the flexible transport future. Transport and Sustainability (8). Bingley: Emerald, pp. 15–34.

Qin, Rongshan (2016). Modelling of phase separation under electropulsing processing. In: THERMEC 2016, 29 May - 3 Jun 2016, Graz, Australia.

Qin, Rongshan (2016). Computation of breakup limit under external field. In: UK Consortium on Mesoscale Engineering Sciences 2016 Workshop, 12-13 Dec 2016, University College London, UK.

Reichelt, N. T.; Wallis, P. J.; Ison, R. L.; Davies, J.; Carberry, P.; Sparrow, A; Hall, A and Maru, Y. (2016). Mediating boundaries between knowledge and knowing: ICT and R4D praxis. Outlook on Agriculture, 45(4) pp. 238–245.

Reichelt, N. T.; Wallis, P. J.; Ison, R. L.; Davies, J.; Carberry, P.; Sparrow, A.; Hall, A. and Maru, Y. (2016). Mediating boundaries between knowledge and knowing: ICT and R4D praxis. In: 12th European IFSA Symposium, 12-16 Jul 2016, Harper Adams University, UK.

Reichelt, N. T.; Wallis, P. J.; Ison, R. L.; Davies, J.; Carberry, P.; Sparrow, A.; Hall, A. and Maru, Y. (2016). Mediating boundaries between knowledge and knowing: ICT and R4D praxis. In: 12th European IFSA Symposium - Social and technological transformation of farming systems: Diverging and converging pathways, 12-16 Jul 2016, Harper Adams University, Newport, UK.

Reynolds, Martin (2016). Towards Praxis in Systems Thinking. In: Frank, Moti; Shaked, Haim and Koral-Kordova, Sigal eds. Systems Thinking: Foundation, Uses and Challenges. New York: Nova Science Publishers, pp. 3–33.

Reynolds, Martin; Gates, Emily; Hummelbrunner, Richard; Marra, Mita and Williams, Bob (2016). Towards Systemic Evaluation. Systems Research and Behavioral Science, 33(5) pp. 662–673.

Reynolds, Martin; Shah, Rupesh; Wedlock, Elaine; Ison, Ray and Blackmore, Christine (2016). Enhancing Systems Thinking in Practice at the Workplace: eSTEeM final report. The OU Centre for STEM Pedagogy.

Robson, Linda; Cook, Lynda and Habgood, Nicolette (2016). Student experience of university email communication. In: Proceedings of the 10th International Technology, Education and Development Conference, IATED, Valencia pp. 6118–6124.

Robson, Linda; Patel, Mona and Nicholson, Jacquie (2016). National Association of Disabled Staff Networks (NADSN) – “Our Stories: Experiences from our Disabled Staff Networks across the UK”. The Journal of Inclusive Practice in further and higher education(7) pp. 28–33.

Roy, Robin (2016). A Story of Innovation: The Cyclone Vacuum Cleaner Invented by James Dyson. Creative Academic Magazine, UK.

Roy, Robin (2016). Consumer Product Design and Innovation: Past, present and future. In: Proceedings of DRS 2016, Design Research Society 50th Anniversary Conference (Lloyd, Peter and Bohemia, Erik eds.), Design Research Society, London, UK, 10 pp. 3755–3770.

Rubenstein, Naomi; Wallis, Philip J.; Ison, Raymond L. and Godden, Lee (2016). Critical Reflections on Building a Community of Conversation about Water Governance in Australia. Water Alternatives, 9(1) pp. 81–98.

Seaton, Richard; Sharp, D.; Jones, A. and Pim, D. N. (2016). Experiments with Choirs – Practice and Pitfalls. In: Proceedings of the Institute of Acoustics, Institute of Acoustics, St. Albans, pp. 362–373.

Semprebon, Ciro; Varagnolo, Silvia; Filippi, Daniele; Perlini, Luca; Pierno, Matteo; Brinkmann, Martin and Mistura, Giampaolo (2016). Deviation of sliding drops at a chemical step. Soft Matter, 12(40) pp. 8268–8273.

Shin, H.-C.; Whalley, W. R.; Attenborough, K. and Taherzadeh, S. (2016). On the theory of Brutsaert about elastic wave speeds in unsaturated soils. Soil and Tillage Research, 156 pp. 155–165.

Short, Lawson (2016). Shared Understanding Within Large Information Systems Projects. PhD thesis The Open University.

Singh, Aadesh P.; Kodan, Nisha; Mehta, Bodhraj; Dey, Avishek and Krishnamurthy, Satheesh (2016). In-situ plasma hydrogenated TiO2 thin films for enhanced photoelectrochemical properties. Materials Research Bulletin, 76 pp. 284–291.

Srivastava, Vibha; Lim, Sungwoo and Anand, Mahesh (2016). Microwave processing of lunar soil for supporting longer-term surface exploration on the Moon. Space Policy, 37(2) pp. 92–96.

Storer, S. C.; Fitzpatrick, M. E.; Hainsworth, S. V. and Rist, M. A. (2016). Experimental study of room-temperature indentation viscoplastic ‘creep’ in zirconium. Philosophical Magazine. Part A: Materials Science, 96(24) pp. 2547–2563.

Stronach, Alexander; Bashir, Imran; Taherzadeh, Shahram and Attenborough, Keith (2016). Air-borne acoustic surface waves generated over a periodic rough surface. In: Proceedings of the Institute of Acoustics, 38(1) pp. 108–113.

Tschirhart, Céline; Mistry, Jayalaxshmi; Berardi, Andrea; Bignante, Elisa; Simpson, Matthew; Haynes, Lakeram; Benjamin, Ryan; Albert, Grace; Xavier, Rebecca; Robertson, Bernie; Davis, Odacy; Verwer, Caspar; de Ville, Géraud and Jafferally, Deirdre (2016). Learning from one another: evaluating the impact of horizontal knowledge exchange for environmental management and governance. Ecology and Society, 21(2), article no. 41.

Umney, Darren (2016). A design analysis of parliamentary debate. PhD thesis The Open University.

Umney, Darren; Earl, Christopher and Lloyd, Peter (2016). Design as analysis: examining the use of precedents in parliamentary debate. In: Proceedings of DRS2016: Design + Research + Society - Future-Focused Thinking, University of Brighton, Brighton, UK.

Unnikrishnan, Rahul; Northover, Shirley; Jazaeri, Hedieh and Bouchard, P. John (2016). Investigating plastic deformation around a reheat-crack in a 316H austenitic stainless steel weldment by misorientation mapping. In: Procedia Structural Integrity, Elsevier, 2 pp. 3501–3507.

van Bommel, Séverine; Blackmore, Chris; Foster, Natalie and de Vries, Jasper (2016). Performing and orchestrating governance learning for systemic transformation in practice for climate change adaptation. Outlook on Agriculture, 45(4) pp. 231–237.

Varagnolo, Silvia; Basu, N.; Ferraro, D.; Tóth, T.; Pierno, M.; Mistura, G.; Fois, G.; Tripathi, B.; Brazil, O. and Cross, G.L.W. (2016). Effect of hair morphology and elastic stiffness on the wetting properties of hairy surfaces. Microelectronic Engineering, 161 pp. 74–81.

Vourch, Clement J.; Allen, B. and Drysdale, Timothy D. (2016). Planar millimetre-wave antenna simultaneously producing four orbital angular momentum modes and associated multi-element receiver array. IET Microwaves, Antennas & Propagation, 10(14) pp. 1492–1499.

Vourch, Clement J. and Drysdale, Timothy D. (2016). V-band Bull's eye antenna for multiple discretely steerable beams. IET Microwaves, Antennas & Propagation, 10(3) pp. 318–325.

Wan Dagang, W.R.Z.; Bowen, J.; O'Keeffe, J.; Robbins, P.T. and Zhang, Z. (2016). Adhesion of Pseudomonas fluorescens biofilms to glass, stainless steel and cellulose. Biotechnology Letters, 38(5) pp. 787–792.

Watkins, Nicholas W.; Pruessner, Gunnar; Chapman, Sandra C.; Crosby, Norma B. and Jensen, Henrik J. (2016). 25 Years of Self-organized Criticality: Concepts and Controversies. Space Science Reviews, 198(1) pp. 3–44.

Welden, Natalie A.C. and Cowie, Phillip R. (2016). Environment and gut morphology influence microplastic retention in langoustine, Nephrops norvegicus. Environmental Pollution, 214 pp. 859–865.

Welden, Natalie A.C. and Cowie, Phillip R. (2016). Long-term microplastic retention causes reduced body condition in the langoustine, Nephrops norvegicus. Environmental Pollution, 218 pp. 895–900.

Zamenopoulos, Theodore; Alexiou, Katerina; Alevizou, Giota; Chapain, Caroline; Sobers, Shawn and Williams, Andy (2016). Varieties of Creative Citizenship. In: Hargreaves, Ian and Hartley, John eds. The Creative Citizen Unbound: How social media and DIY culture contribute to democracy, communities and the creative economy. Bristol: Policy Press, pp. 103–128.

Zhang, Jikui; Zhang, Xiang; Wang, Xueyuan; Ding, Jialuo; Traore, Yeli; Paddea, Sanjooram and Williams, Stewart (2016). Crack path selection at the interface of wrought and wire+arc additive manufactured Ti–6Al–4V. Materials & Design, 104 pp. 365–375.

Zhou, S. L.; Valchev, D. G.; Dinovitser, A.; Chappell, J. M.; Iqbal, A.; Ng, B. W-H.; Kee, T. W. and Abbott, D. (2016). Dispersion-Independent Terahertz Classification Based on Geometric Algebra for Substance Detection. In: 41st International Conference on Infrared, Millimeter, and Terahertz waves (IRMMW-THz), 25-30 Sep 2016, Copenhagen, Denmark.

Zhou, Shengling; Valchev, Dimitar G.; Dinovitser, Alex; Chappell, James M.; Iqbal, Azhar; Ng, Brian W-H.; Kee, Tak W. and Abbott, Derek (2016). Terahertz Signal Classification Based on Geometric Algebra. IEEE Transactions on Terahertz Science and Technology, 6(6) pp. 793–802.

2015To Top

Acar, Murat O. and Gungor, Salih (2015). Experimental and numerical study of strength mismatch in cross-weld tensile testing. Journal of Strain Analysis for Engineering Design, 50(6) pp. 349–365.

Aitchison, Iain; Dewberry, Emma and Lotz, Nicole (2015). Out of sight, out of mind: curriculum representation in design education today. In: Proceedings of the 3rd International Conference for Design Education Researchers (Vande Zande, Robin; Bohemia, Erik and Digranes, Ingvild eds.), Aalto University, pp. 1536–1551.

Alexandrova, Assia; Rapanotti, Lucia and Horrocks, Ivan (2015). The legacy problem in government agencies: an exploratory study. In: Proceedings of the 16th Annual International Conference on Digital Government Research, ACM, pp. 150–159.

Alexiou, K.; Alevizou, G.; Zamenopoulos, T.; de Sousa, S. and Dredge, L. (2015). Learning from the use of media in community-led design projects. Cultural Science, 8(1) pp. 30–40.

Araujo de Oliveira, J.; Kowal, J.; Gungor, S. and Fitzpatrick, M. E. (2015). Determination of normal and shear residual stresses from fracture surface mismatch. Materials & Design, 83(C) pp. 176–184.

Arif, Tansel and Qin, Rongshan (2015). Smoothed particle hydrodynamics model for van der Walls fluid. In: 24th International Conference on Discrete Simulation of Fluid Dynamics, 13-17 Jul 2015, Edinburgh, p. 87.

Armitage, Derek; de Loë, Rob C.; Morris, Michelle; Edwards, Tom W. D.; Gerlak, Andrea K.; Hall, Roland I.; Huitema, Dave; Ison, Ray; Livingstone, David; MacDonald, Glen; Mirumachi, Naho; Plummer, Ryan and Wolfe, Brent B. (2015). Science–policy processes for transboundary water governance. Ambio, 44(5) pp. 353–366.

Ashley, S. F.; Fenner, R. A.; Nuttall, W. J. and Parks, G. T. (2015). Life-cycle impacts from novel thorium–uranium-fuelled nuclear energy systems. Energy Conversion and Management, 101 pp. 136–150.

Bashir, Imran; Taherzadeh, Shahram; Shin, Ho-Chul and Attenborough, Keith (2015). Sound propagation over soft ground without and with crops and potential for surface transport noise attenuation. Journal of the Acoustical Society of America, 137(1) pp. 154–164.

Bell, Simon (2015). Formations of terror - can systems approaches help us to model and avoid the tipping point? In: 21st International Sustainable Development Research Society Conference Tipping Point: Vulnerability and Adaptive Capacity, 10-12 Jul 2015, Geelong, Australia, ISDR Society.

Bell, Simon (2015). Participating in the knowledge society. Systemic Practice and Action Research, 28(3) pp. 289–296.

Bell, Simon; Berg, Tessa and Morse, Stephen (2015). Rich pictures – beyond the tipping point. In: ISDR2015.

Ben Hamida, Sonia; Jankovic, Marija; Callot, Martine; Monceaux, Anne and Eckert, Claudia (2015). Towards a decision support framework for system architecture design. In: 20th International Conference on Engineering Design (ICED 2015), 27-30 Jul 2015, Milan.

Berardi, Andrea; Bignante, Elisa; Mistry, Jay; Simpson, Matthew; Tschirhart, Céline; Verwer, Caspar and de Ville, Géraud (2015). How to find and share community owned solutions. Cobra Collective.

Berardi, Andrea; Mistry, Jayalaxshmi; Tschirhart, Céline; Bignante, Elisa; Davis, Odacy; Haynes, Lakeram; Benjamin, Ryan; Albert, Grace; Xavier, Rebecca; Jafferally, Deirdre and de Ville, Géraud (2015). Applying the system viability framework for cross-scalar governance of nested social-ecological systems in the Guiana Shield, South America. Ecology and Society, 20(3), article no. 42.

Berg, Tessa; Bell, Simon and Morse, Stephen (2015). The soul of groups: eductive interpretation of rich pictures. In: 27th European Conference on Operational Research (EURO 2015), 13 Jul 2015, Glasgow.

Blackmore, C. P.; Sriskandarajah, Nadarajah and Ison, Ray (2015). Designing and evaluating a conference-based critical social learning system to support systems thinking in practice in PhD research. In: Proc. ISSS Conference, 2-7 Aug 2015, Berlin.

Blackmore, Chris; Reynolds, Martin; Ison, Raymond and Lane, Andrew (2015). Embedding sustainability through systems thinking in practice: some experiences from the Open University. In: Wyness, Lynne ed. Education for Sustainable Development Pedagogy: Criticality, Creativity, and Collaboration. PedRIO occasional papers (8). Plymouth University: Pedagogic Research Institute and Observatory (PedRIO), pp. 32–35.

Boardman, C.; Burnley, S.; Gauci, V. and Gladding, T. (2015). Greenhouse gas emissions from non-recyclable residual household waste within domestic wheeled bins. In: 15th International Waste Management and Landfill Symposium (Sardinia 2015), 5-9 Oct 2015, S. Margherita di Pula, Sardinia, Italy, CISA Publisher, Italy.

Bompard, Ettore; Masera, Marcelo and Nuttall, William J. (2015). High tension electricity: new multi-scale complexities in the electricity system. Technological Forecasting and Social Change, 96 pp. 327–333.

Booth, Joran W.; Reid, Tahira; Eckert, Claudia and Ramani, Karthik (2015). Comparing functional analysis methods for product dissection tasks. Journal of Mechanical Design, 137(8), article no. 081101.

Bowen, James; Cheneler, David and Andrews, James W (2015). The adhesive properties of viscoelastic liquid films. In: UK Materials Characterisation Seminar 2015, 15 Oct 2015, Teddington, UK.

Bowen, James; Cheneler, David and Andrews, James W. (2015). Predicting the behaviour of micro/nanoparticles in lung lining fluid. In: Annual Aerosol Society Conference 2015, 12 Nov 2015, Birmingham, UK.

Bowen, James; Leigh, Simon J. and Preece, Jon A. (2015). Multiscale patterning of nanocomposite polyelectrolyte/nanoparticle films using inkjet printing and AFM scratching. In: Science of Inkjet and Printed Droplets 2015, 10 Nov 2015, London, UK.

Buckland, Thomas (2015). Developing a Whole-Life Value Model for the Irish National Road Network. PhD thesis The Open University.

Burnett, T. L.; Geurts, R.; Jazaeri, H.; Northover, S. M.; McDonald, S. A.; Haigh, S. J.; Bouchard, P. J. and Withers, P. J. (2015). Multiscale 3D analysis of creep cavities in AISI type 316 stainless steel. Materials Science and Technology, 31(5) pp. 522–534.

Burnley, Stephen; Coleman, Terry and Peirce, Adam (2015). Factors influencing the life cycle burdens of the recovery of energy from residual municipal waste. Waste Management, 39 pp. 295–304.

Buys, Kurijn; Sharp, David and Laney, Robin (2015). A comparison of single-reed and bowed-string excitations of a hybrid wind instrument. In: Proceedings of the Third Vienna Talk on Music Acoustics, University of Music and Performing Arts Vienna, pp. 290–296.

Caird, Sally and Lane, Andrew (2015). Conceptualising the role of Information and Communication Technologies in the design of higher education teaching models used in the UK. British Journal of Educational Technology, 46(1) pp. 58–70.

Caird, Sally; Lane, Andy; Swithenby, Ed; Roy, Robin and Potter, Stephen (2015). Design of higher education teaching models and carbon impacts. International Journal of Sustainability in Higher Education, 16(1) pp. 96–111.

Caird, Sally; Swithenby, Edward and Lane, Andrew (2015). The SusTEACH Methodology: Assessment of the environmental impacts of Higher Education Teaching Models and development of an Environmental Appraisal toolkit. The Open University.

Carugo, David; Halyatleh, Khaled; Lidgey, J. and Sharp, David (2015). Play that funky music: Making 3D acoustic measurements of instruments under performance conditions. In: Proceedings of the Institute of Acoustics, 37(2) pp. 251–259.

Chapman, S. C.; Dendy, R. O.; Todd, T. N.; Watkins, N. W.; Calderon, F. A. and Morris, J. (2015). The global build-up to intrinsic edge localized mode bursts seen in divertor full flux loops in JET. Physics of Plasmas, 22(7), article no. 072506.

Chapman, Sandra C.; Stainforth, David A. and Watkins, Nicholas W. (2015). Limits to the quantification of local climate change. Environmental Research Letters, 10(9), article no. 094018.

Comunian, Roberta and Alexiou, Katerina (2015). Mapping the complexity of creative practice: using cognitive maps to follow creative ideas and collaborations. In: Duxbury, Nancy; Garrett-Petts, W. .F and MacLennan, David eds. Cultural Mapping as Cultural Inquiry. Routledge Advances in Research Methods. Abingdon: Routledge, pp. 276–302.

Cook, Matthew; Potter, Stephen; Langendahl, Per-Anders; Roby, Helen; Collins, Trevor and Taylor, Dan (2015). Exploring the role of intermediaries in smart grid developments. In: Sustainable Innovation 2015, 9-10 Nov 2015, Epsom, Surrey.

Doré, Matthew James (2015). An investigation of fatigue crack growth acceleration. PhD thesis The Open University.

Dove, Edward S.; Barlas, İ. Ömer; Birch, Kean; Boehme, Catharina; Borda-Rodriguez, Alexander; Byne, William M.; Chaverneff, Florence; Coşkun, Yavuz; Dahl, Marja-Liisa; Dereli, Türkay; Diwakar, Shyam; Elbeyli, Levent; Endrenyi, Laszlo; Eroğlu-Kesim, Belgin; Ferguson, Lynnette R.; Güngör, Kıvanç; Gürsoy, Ulvi; Hekim, Nezih; Huzair, Farah; Kaushik, Kabeer; Kickbusch, Ilona; Kıroğlu, Olcay; Kolker, Eugene; Könönen, Eija; Lin, Biaoyang; Llerena, Adrian; Malhan, Faruk; Nair, Bipin; Patrinos, George P.; Şardaş, Semra; Sert, Özlem; Srivastava, Sanjeeva; Steuten, Lotte M.G.; Toraman, Cengiz; Vayena, Effy; Wang, Wei; Warnich, Louise and Özdemir, Vural (2015). An appeal to the global health community for a tripartite innovation: an ‘‘Essential Diagnostics List,’’ ‘‘Health in All Policies,’’ and ‘‘See-Through 21st Century Science and Ethics". OMICS: A Journal of Integrative Biology, 19(8) pp. 435–442.

Dragna, Didier; Attenborough, Keith and Blanc-Benon, Philippe (2015). On the inadvisability of using single parameter impedance models for representing the acoustical properties of ground surfaces. Journal of the Acoustical Society of America, 138(4) pp. 2399–2413.

Duffy, E.; He, X.; Nesterenko, E. P.; Brabazon, D.; Dey, A.; Krishnamurthy, S.; Nesterenkoa, P. N. and Paul, B. (2015). Thermally controlled growth of carbon onions within porous graphitic carbon-detonation nanodiamond monolithic composites. RSC Advances, 5(29) pp. 22906–22915.

Earl, Christopher F. and Jowers, Iestyn (2015). Pinwheel patterns: from 2D to 3D schemas. Nexus Network Journal, 17(3) pp. 899–912.

Eckert, Claudia; Albers, Albert; Bursac, Nikola; Chen, Hilario Xin; Clarkson, John; Gericke, Kilian; Gladysz, Bartosz; Maier, Jakob; Rachenkova, Galina; Shapiro, Daniel and Wynn, David (2015). Integrated product and process models: towards an integrated framework and review. In: 20th International Conference on Engineering Design (ICED 2015), 27-30 Jul 2015, Milan.

Elliott-Bowman, B.; Cook, A. C.; Brown, P.; Dye, D. and Qin, R. S. (2015). Altering the microstructure of pearlitic steel using pulsed electric current. In: Sustainable Materials Science and Technology, 15-17 Jul 2015, Paris.

Elliott-Bowman, B. and Qin, R. (2015). The effects of electropulsing on metallic materials. In: Coval, H.H. and Gromov, B.E. eds. Modern Trends in Modification of Structure and Properties of Materials. TOMCK Publishing House HTO, pp. 165–193.

Finnegan, Stephen; dos-Santos, Joseph David; Chow, David H. C.; Yan, Qu O. and Moncaster, Alice (2015). Financing energy efficiency measures in buildings - a new method of appraisal. International Journal of Sustainable Building Technology and Urban Development, 6(2) pp. 62–70.

Fortune, Joyce; Peters, Geoffrey and Short, Lawson (2015). Shared understanding during design and delivery: the case of a large-scale information systems program. International Journal of Project Organisation and Management, 7(4) pp. 327–338.

Foster, Natalie; Collins, Kevin; Ison, Raymond and Blackmore, Chris (2015). Water governance in the UK and EU: So far, so what and what next? Symposium Report. 16th September 2015, Royal Society, London. The Open University, Milton Keynes.

Franzke, Christian L. E.; Osprey, Scott M.; Davini, Paolo and Watkins, Nicholas W. (2015). A Dynamical Systems Explanation of the Hurst Effect and Atmospheric Low-Frequency Variability. Scientific Reports, 5, article no. 9068.

Frommhold, A.; Brown, A. G.; Lada, T.; Bowen, J. and Robinson, A. P. G. (2015). Fullerene derivative based spin-on-carbon hard masks for advanced lithographic applications. In: Fullerenes – Past, Present and Future, 15-16 Jul 2015, London, UK.

Furniss, Pamela (2015). Information in Water and Health. In: Bartram, Jamie ed. Routledge Handbook of Water and Health. London: Routledge, pp. 507–513.

Gantner, Johannes; Wittstock, Bastian; Lenz, Katrin; Fischer, Matthias; Sedlbauer, Klaus; Anderson, Jane; Saunders, Tom; Gyetvai, Zsoka; Carter, Claire; Braune, Anna; Kreißig, Johannes; Bosdevigie, Boris; Lasvaux, Sébastien; Schiopu, Nicoleta; Bazzana, Manuel; Jayr, Emmanuel; Nibel, Sylviane; Hans, Julien; Chevalier, Jacques; Gazulla, Cristina; Fullana-i-Palmer, Pere; Barrow-Williams, Tim; Mundy, Jo-Anne and Sjöström, Christer (2015). EeBGuide Guidance Document Part A: Products. Operational guidance for Life Cycle Assessment studies of the Energy Efficient Building Initiative. Stuttgart: Fraunhofer Verlag, p. 332.

Gantner, Johannes; Wittstock, Bastian; Lenz, Katrin; Fischer, Matthias; Sedlbauer, Klaus; Anderson, Jane; Saunders, Tom; Gyetvai, Zsoka; Carter, Claire; Braune, Anna; Kreißig, Johannes; Bosdevigie, Boris; Lasvaux, Sébastien; Schiopu, Nicoleta; Bazzana, Manuel; Jayr, Emmanuel; Nibel, Sylviane; Hans, Julien; Chevalier, Jacques; Gazulla, Cristina; Fullana-i-Palmer, Pere; Barrow-Williams, Tim; Mundy, Jo-Anne and Sjöström, Christer (2015). EeBGuide Guidance Document Part B: Buildings. Operational guidance for life cycle assessment studies of the Energy Efficient Building Initiative. Stuttgart: Fraunhofer Verlag.

Gavotsis, E. and Moncaster, A. (2015). Improved embodied energy and carbon accounting: recommendations for industry and policy. Athens Journal of Technology & Engineering, 2(1) pp. 9–23.

Gericke, Kilian and Eckert, Claudia (2015). The long road to improvement in modelling & managing engineering processes (MMEP). In: Proceedings of the 20th International Conference on Engineering Design (ICED15).

Glowacki, B. A.; Nuttall, W. J.; Hanley, E.; Kennedy, L. and O’Flynn, D. (2015). Hydrogen cryomagnetics for decentralised energy management and superconductivity. Journal of Superconductivity and Novel Magnetism, 28(2) pp. 561–571.

Golrokhi, Zahra; Chalker, Sophia; Sutcliffe, Christopher J. and Potter, Richard J. (2015). Self-limiting atomic layer deposition of conformal nano-structured silver films. Applied Surface Science, 364 pp. 789–797.

Goolaup, S.; Ramu, M.; Murapaka, C. and Lew, W. S. (2015). Transverse Domain Wall Profile for Spin Logic Applications. Scientific reports, 5, article no. 9603.

Graves, T.; Gramacy, R. B.; Franzke, C. L. E. and Watkins, N. W. (2015). Efficient Bayesian inference for natural time series using ARFIMA processes. Nonlinear Processes in Geophysics, 22(6) pp. 679–700.

Green, Naomi C.; Bowen, James; Hukins, David W. L. and Shepherd, Duncan E. T. (2015). Assessment of non-contacting optical methods to measure wear and surface roughness in ceramic total disc replacements. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 229(3) pp. 245–254.

Gürsoy, Benay; Jowers, Iestyn and Özkar, Mine (2015). Formal descriptions of material manipulations: an exploration with cuts and shadows. In: Celani, Gabriela; Sperling, David Moreno and Franco, Juarez Moara Santos eds. Computer-Aided Architectural Design Futures. The Next City - New Technologies and the Future of the Built Environment. Communications in Computer and Information Science (527). Springer, pp. 439–457.

Hamilton, Dean P.; Mills, Liam; Bowen, James; Jennings, Michael R. and Mawby, Philip A. (2015). High temperature reliability of power module substrates. In: PCIM Europe 2015, 19-20 May 2015, Nuremburg, Germany.

Harrison, Laura; Earl, Christopher and Eckert, Claudia (2015). Exploratory making: Shape, structure and motion. Design Studies, 41(A) pp. 51–78.

Heath, Robert M.; Tanner, Michael G.; Drysdale, Timothy D.; Miki, Shigehito; Giannini, Vincenzo; Maier, Stefan A. and Hadfield, Robert H. (2015). Nanoantenna enhancement for telecom-wavelength superconducting single photon detectors. Nano Letters, 15(2) pp. 819–822.

Holden, Tom M.; Traore, Yeli; James, Jon; Kelleher, Joe and Bouchard, P. John (2015). Determination and mitigation of the uncertainty of neutron diffraction measurements of residual strain in large-grained polycrystalline material. Journal of Applied Crystallography, 48(2) pp. 582–584.

Horrocks, Ivan and Budd, Leslie (2015). Into the void: a realist evaluation of the eGovernment for You (EGOV4U) project. Evaluation, 21(1) pp. 47–64.

Hush, Michael (2015). 100 fears of solitude: working on individual academic engineering projects remotely. In: Proceedings of Seventh International Symposium on Project Approaches in Engineering Education, Aalborg Universitetsforlag, Aalborg, Denmark, pp. 80–86.

Hush, P.; Chapman, S. C.; Dunlop, M. W. and Watkins, N. W. (2015). Robust statistical properties of the size of large burst events in AE. Geophysical Research Letters, 42(21) pp. 9197–9202.

Huzair, Farah and Kale, Dinar (2015). Biosimilars and the long game. Trends in Biotechnology, 33(5) pp. 250–252.

Ison, R. L. and Schlindwein, S. (2015). Navigating through an ‘ecological desert and a sociological hell’: a cyber-systemic governance approach for the Anthropocene. Kybernetes, 44(6/7) pp. 891–902.

Ison, Raymond (2015). Book Review of "Participatory action research. Theory and methods for engaged enquiry" by Jacques M. Chevalier & Daniel J. Buckles. Natures Sciences Sociétés, 23 pp. 75–76.

Ison, Raymond; Allan, Catherine and Collins, Kevin (2015). Reframing water governance praxis: does reflection on metaphors have a role? Environment & Planning C: Government & Policy, 33 pp. 1697–1713.

Ison, Raymond L.; Collins, Kevin B. and Wallis, Philip J (2015). Institutionalising social learning: towards systemic and adaptive governance. Environmental Science & Policy, 53(Part B) pp. 105–117.

Jazaeri, H.; Bouchard, P. J.; Hutchings, M.; Mamun, A. and Heenan, R. (2015). Study of creep cavitation through creep life. In: 13th International Conference on Creep and Fracture of Engineering Materials and Structures, 31 May - 4 Jun 2015, Toulouse, France.

Jazaeri, H.; Bouchard, P. J.; Hutchings, M. T.; Mamun, A. A. and Heenan, R. K. (2015). Application of small angle neutron scattering to study creep cavitation in stainless steel weldments. Materials Science and Technology, 31(5) pp. 535–539.

Johnson, Jeffrey (2015). Policy Design, Planning, and Management in Global Systems Science. In: Cardin, Michel-Alexandre; Krob, Daniel; Pao, Chuen Lui; Yang, How Tan and Wood, Kristin eds. Complex Systems Design & Management Asia. Designing Smart Cities: Proceedings of the First Asia - Pacific Conference on Complex Systems Design & Management, CSD&M Asia 2014. Springer, pp. 125–132.

Jones, Derek (2015). Reflection-in-action and motivated reasoning. In: Proceedings of the 3rd International Conference for Design Education Researchers (VandeZande, Robin; Bohemia, Erik and Digranes, Ingvild eds.), Aalto University, pp. 1599–1615.

Jowers, Iestyn and Earl, Christopher (2015). Extending the algebras of design. Nexus Network Journal, 17(3) pp. 947–962.

Kale, Dinar and Huzair, Farah (2015). New sources of growth under the TRIPS compliant patent regime for emerging country pharmaceutical industries?: Investigating the development of biosimilar capabilities in the Indian pharmaceutical sector. In: 13th Globelics International Conference, 23-25 Sep 2015, Havana, Cuba.

Kale, Dinar and Huzair, Farah (2015). Heterogeneity in learning processes and the evolution of dynamic capabilities: evidence from the Indian pharmaceutical industry. In: DRUID15 Conference on the Relevance of Innovation, 15-17 Jun 2015, Rome, Italy.

Kennedy, Jennifer L.; Drysdale, Timothy and Gregory, Duncan H. (2015). Rapid, energy-efficient synthesis of the layered carbide, Al4C3. Green Chemistry, 17(1) pp. 285–290.

Kisan, Bhagban; Saravanan, P.; Layek, Samar; Verma, H. C.; Hesp, David; Dhanak, Vinod; Krishnamurthy, Satheesh and Perumal, A. (2015). Effect of annealing on the magnetic properties of ball milled NiO powders. Journal of Magnetism and Magnetic Materials, 384 pp. 296–301.

Koner, Jasdip S.; Rajabi-Siahboomi, Ali; Bowen, James; Perrie, Yvonne; Kirby, Daniel and Mohammed, Afzal R. (2015). A holistic multi evidence approach to study the fragmentation behaviour of crystalline mannitol. Scientific Reports, 5, article no. 16352.

Kong, Xiang-Tian; Khan, Ammar A.; Kidambi, Piran R.; Deng, Sunan; Yetisen, Ali K.; Dlubak, Bruno; Hiralal, Pritesh; Montelongo, Yunuen; Bowen, James; Xavier, Stéphane; Jiang, Kyle; Amaratunga, Gehan A. J.; Hofmann, Stephan; Wilkinson, Timothy D.; Dai, Qing and Butt, Haider (2015). Graphene-based ultrathin flat lenses. ACS Photonics, 2(2) pp. 200–207.

Laik, A.; Shirzadi, A. A.; Sharma, G.; Tewari, R.; Jayakumar, T. and Dey, G. K. (2015). Microstructure and Interfacial Reactions During Vacuum Brazing of Stainless Steel to Titanium Using Ag-28 pct Cu Alloy. Metallurgical and Materials Transactions A, 46(2) pp. 771–782.

Leigh, S. J.; Bowen, J. and Preece, J. A. (2015). Multiscale patterning of nanocomposite polyelectrolyte/nanoparticle films using inkjet printing and AFM scratching. Materials Research Express, 2(6), article no. 065301.

Leigh, Simon J; Bowen, James and Preece, Jon A (2015). Multiscale structuring of materials - a hybrid additive, subtractive and directed assembly approach. In: Recent Appointees in Materials Science 2015, 16-17 Sep 2015, Warwick, UK.

Lotz, Nicole; Jones, Derek and Holden, Georgina (2015). Social engagement in online design pedagogies. In: Proceedings of the 3rd International Conference for Design Education Researchers (Vande Zande, Robin; Bohemia, Erik and Digranes, Ingvild eds.), Aalto University, pp. 1645–1668.

Lu, W. J.; Zhang, X. F. and Qin, R. S. (2015). Structure and properties of κ-carbides in duplex lightweight steels. Ironmaking & Steelmaking, 42(8) pp. 626–631.

Lu, W. J.; Zhang, X. F. and Qin, R. S. (2015). Stability of precipitates under electropulsing in 316L stainless steel. Materials Science and Technology, 31(13a) pp. 1530–1535.

Lu, W.J.; Zhang, X.F. and Qin, Rongshan (2015). κ-carbide hardening in a low-density high-Al high-Mn multiphase steel. Materials Letters, 138 pp. 96–99.

Luck, Rachael (2015). Organising design in the wild: locating multidisciplinarity as a way of working. Architectural Engineering and Design Management, 11(2) pp. 149–162.

Luck, Rachael (2015). Towards the formulation of a research question: guidance through the glass bead game of research design. In: Rogers, Paul and Yee, Joyce eds. Routledge Companion to Design Research. Abingdon: Routledge, pp. 142–150.

Luo, Yong-Kun and Qin, Rong-Shan (2015). Computation of five-dimensional grain boundary energy. Acta Metallurgica Sinica (English Letters), 28(5) pp. 634–640.

Madsen, Björn (2015). How to Make the Most Productive Intervention in a Complex Economic System. PhD thesis The Open University.

Maier, Jakob; Eckert, Claudia and Clarkson, John (2015). Different levels of product model granularity in design process simulation. In: 20th International Conference on Engineering Design (ICED 2015), 27-30 Jul 2015, Milan.

Malik, S.; Ng, W.; Bowen, J.; Tang, J.; Gomez, A.; Kenyon, A. J. and Day, R. M. (2015). In vitro performance of dye-loaded microsphere-based controlled release technologies synthesized via electrospray atomization. In: 3rd International Conference on Nanotechnology in Medicine, 23-25 Nov 2015, Manchester, UK.

Malik, S. A.; Ng, W. H.; Bowen, J.; Tang, J.; Gomez, A.; Kenyon, A. J. and Day, R. M. (2015). Electrospray synthesis of PLGA TIPS microspheres. In: Aerosol Technology 2015, 15-17 Jun 2015, Tampere, Finland.

Malik, S. A.; Ng, W. H.; Bowen, J.; Tang, J.; Gomez, A.; Kenyon, A. J. and Day, R. M. (2015). Electrospray synthesis of PLGA TIPS microspheres. In: European Aerosol Conference, 6-11 Sep 2015, Milan, Italy.

Mamun, Abdullah; Moat, Richard James and Bouchard, P. John (2015). Origin and Effect of Back Stress on Cyclic Creep Deformation of 316H Stainless Steel. In: Volume 5: High-Pressure Technology; Rudy Scavuzzo Student Paper Competition and 23rd Annual Student Paper Competition; ASME NDE Division, V005T09A013.

Marino, Armando and Hajnsek, Irena (2015). Ship detection with TanDEM-X data extending the Polarimetric Notch Filter. IEEE Geoscience and Remote Sensing Letters, 12(10) pp. 2160–2164.

Marino, Armando and Hajnsek, Irena (2015). Statistical tests for a ship detector based on the Polarimetric Notch Filter. IEEE Transactions on Geoscience and Remote Sensing, 53(8) pp. 4578–4595.

Marino, Armando; Sanjuan-Ferrer, Maria J.; Hajnsek, Irena and Ouchi, Kazuo (2015). Ship detection with spectral analysis of synthetic aperture radar: a comparison of new and well-known algorithms. Remote Sensing, 7(5) pp. 5416–5439.

Martin, Keith (2015). Factors Influencing the Forward Acceleration of a Gravity Powered Soapbox Race Vehicle. British Journal of Applied Science & Technology, 12(6) pp. 1–9.

Mathew, Jino (2015). Weld Residual Stress Profiles for Structural Integrity Assessment. PhD thesis The Open University.

Matthew, George Jr. S.; Nuttall, William; Mestel, Ben and Dooley, Laurence (2015). Insights into the Thermal Generation Futures of Isolated Island Electricity Systems Using System Dynamics. In: Proceedings of the 33rd International Conference of the System Dynamics Society, 19-23 Jul 2015, Cambridge, Massachusetts, USA.

Meurisse, Thibaut; Mamou-Mani, Adrien; Benacchio, Simon; Chomette, Baptiste; Finel, Victor; Sharp, David and Causse, Rene (2015). Experimental demonstration of the modification of the resonances of a simplified self-sustained wind instrument through modal active control. Acta Acustica united with Acustica, 101(3) pp. 581–593.

Meurisse, Thibaut; Mamou-Mani, Adrien; Caussé, René; Sluchin, Benny and Sharp, David B. (2015). An active mute for the trombone. Journal of the Acoustical Society of America, 138(6) pp. 3539–3548.

Milne, Andrew; Laney, Robin and Sharp, David (2015). A spectral pitch class model of the probe tone data and scalic tonality. Music Perception, 32(4) pp. 364–393.

Mistry, Jayalaxshmi; Berardi, Andrea; Bignante, Elisa and Tschirhart, Céline (2015). Between a rock and a hard place: ethical dilemmas of local community facilitators doing participatory research projects. Geoforum, 61 pp. 27–35.

Mistry, Jayalaxshmi; Berardi, Andrea; Tschirhart, Céline; Bignante, Elisa; Haynes, Lakeram; Benjamin, Ryan; Albert, Grace; Xavier, Rebecca; Jafferally, Deirdre and de Ville, Géraud (2015). Indigenous identity and environmental governance in Guyana, South America. Cultural Geographies, 22(4) pp. 689–712.

Mohammed, D. W.; Bowen, J. and Kukureka, S. N. (2015). Electromechanical reliability of ITO/Ag/ITO multilayer coated pet substrate for optoelectronic application. In: ICAMST 2015: 17th International Conference on Advanced Materials Science and Technology, 13-14 Apr 2015, Venice, Italy.

Mohammed, D. W.; Waddingham, R.; Flewitt, A. J.; Sierros, K. A.; Bowen, J. and Kukureka, S. N. (2015). Mechanical properties of amorphous indium-gallium-zinc oxide thin films on compliant substrates for flexible optoelectronic devices. Thin Solid Films, 594(A) pp. 197–204.

Mohammed, Dilveen W; Sierros, Konstantinos A; Bowen, James and Kukureka, Stephen N (2015). The effects of corrosion, fatigue and fatigue corrosion on ITO/Ag/ITO-coated polymer substrates used in solar cell applications. In: 2nd Asian-European Symposium on Organic Optoelectronics, 27-29 Oct 2015, Edinburgh, UK.

Mohammed, Dilveen W.; Elhamali, S.; Koutsogeorgis, D.; Bowen, James and Kukureka, Stephen N. (2015). Failure behaviour of AZO/Ag/AZO multilayers on PEN substrates for flexible electronic devices. In: 42nd International Conference on Metallurgical Coatings and Thin Films, 20-24 Apr 2015, San Diego, USA.

Moncaster, A. M. and Simmons, P. (2015). Policies and outcomes for UK sustainable schools. Building Research and Information, 43(4) pp. 452–464.

Moncaster, Alice (2015). Pathways to Low Carbon Building: Reflection on the Special Issue. Buildings, 5(3) pp. 751–758.

Morris, Emily; Ortegon-Sanchez, Adriana and Warren, James (2015). Movilidad sostenible: un proyecto viable para las ciudades cubanas [Sustainable Mobility - a viable project for Cuban cities]. Temas(83) pp. 36–43.

Moturu, Shanmukha Rao (2015). Characterization of Residual Stress and Plastic Strain in Austenitic Stainless Steel 316L(N) Weldments. PhD thesis The Open University.

Moullec, Marie-Lise; Jankovic, Marija and Eckert, Claudia (2015). The impact of criteria in system architecture selection: observation from industrial experiment. In: 20th International Conference on Engineering Design (ICED 2015), 27-30 Jul 2015, Milan.

Nawaz, Ahmed; Hasan, Fariha and Shah, Aamer A. (2015). Degradation of poly(ɛ-caprolactone) (PCL) by a newly isolated Brevundimonas sp. strain MRL-AN1 from soil. FEMS Microbiology Letters, 362(1) pp. 1–7.

Northover, Shirley; Northover, Peter and Wilson, Alison (2015). Aspects of discontinuous precipitation reactions in Ag-7.5Cu. In: International Conference on Solid-Solid Phase Transformations in Inorganic Materials (PTM 2015), 28 Jun - 3 Jul 2015, Whistler, BC, Canada.

Nuttall, William; Bompard, Ettore and Masera, Marcelo (2015). Smart Meters, Grids and Criminality. In: Gibson, David and Slovak, Jan eds. Building Sustainable R&D Centres in Emerging Technology Regions. Brno, Czech Republic: Masaryk University, pp. 131–143.

O'Callaghan, K.; Boardman, Carl; Murphy, Richard; Harrison, Jesse; Kosior, Ed; Song, Jim and Delort, Anne-Marie (2015). Review of standards for biodegradable plastic bags. Department for Environment Food & Rural Affairs, London.

Olsson-Francis, Karen; Pearson, Victoria; Boardman, Carl; Schofield, Paul; Oliver, Anna and Summers, Stephen (2015). A culture-independent and culture-dependent study of the bacteria community from the bedrock soil interface. Advances in Microbiology, 5(13) pp. 842–857.

Ooi, Steve; Shirzadi, Amir and Yang, Jianguo (2015). Austenite memory and variant selection in a novel martensitic welding alloy. In: Materials Today: Proceedings, Elsevier Ltd., 2(Suppl. 2) S325-S331.

Perry, Raquel and Robson, Linda (2015). Scholarship beyond the main campus - supporting the pursuit of scholarship in a distributed institution. In: 20th Annual Staff and Educational Development Association Conference, 19-20 Nov 2015, Cardiff, SEDA.

Peter, Andreas Wilhelm (2015). An Integrated Analysis of Collaborative Design Processes. PhD thesis The Open University.

Potter, Stephen; Valdez, Alan; Cook, Matthew and Langendahl, Per-Anders (2015). Governance in niche development for a transition to a new mobility regime. In: International Sustainability Conference 2015, 25-28 Aug 2015, University of Sussex.

Qin, R. S. (2015). Critical assessment 8: Outstanding issues in electropulsing processing. Materials Science and Technology, 31(2) pp. 203–206.

Qin, R. S. (2015). Thermodynamic properties of phase separation in shear flow. Computers & Fluids, 117 pp. 11–16.

Qin, R. S. and Bhowmik, A. (2015). Computational thermodynamics in electric current metallurgy. Materials Science and Technology, 31(13a) pp. 1560–1563.

Qin, Rongshan (2015). On the electric-current-driven microstructural evolution. In: PIERS 2015 in Prague Abstracts, The Electromagnetics Academy.

Rahnama, A. and Qin, R. S. (2015). Modelling the microstructure of martensitic steels. Computational Materials Science, 96(A) pp. 102–107.

Rahnama, A. and Qin, R. S. (2015). The effect of electropulsing on the interlamellar spacing and mechanical properties of a hot-rolled 0.14% carbon steel. Materials Science and Engineering: A, 627 pp. 145–152.

Rahnama, A. and Qin, R. S. (2015). Electropulse-induced microstructural evolution in a ferritic–pearlitic 0.14% C steel. Scripta Materialia, 96 pp. 17–20.

Rahnama, Alireza and Qin, R. S. (2015). Effect of electric current pulses on the microstructure and niobium carbide precipitates in a ferritic-pearlitic steel at an elevated temperature. Journal of Materials Research, 30(20) pp. 3049–3055.

Rahnama, Alireza and Qin, Rongshan (2015). Modelling the microstructure of polycrystalline austenite-martensite steels. In: Proceedings of the 3rd World Congress on Integrated Computational Materials Engineering (ICME 2015), ICME, pp. 147–154.

Rasoulifar, Golnoosh; Prudhomme, Guy and Eckert, Claudia (2015). Communicating consumer needs in the design process of branded products. Journal of Mechanical Design, 137(7), article no. 071404.

Reynolds, M. (2015). Rigour (-mortis) in evaluation. Evaluation Connections: The European Evaluation Society Newsletter, June 2015, Special Edition, pp.2-4.

Reynolds, Martin (2015). (Breaking) The iron triangle of evaluation. IDS Bulletin, 46(1) pp. 71–86.

Reynolds, Martin (2015). Communicating about systems and complexity:from contingency to praxis. In: Patton, Michael Quinn ed. Gedenkschrift to honor Brenda Zimmerman's contributions to understanding complexity and social innovation. Canada: Social Innovation Generation de L’innovation sociale, pp. 32–36.

Robson, Linda (2015). Developing the developers – supporting development of online conference presentations. In: INTED2015 Proceedings, 0381-0386.

Robson, Linda (2015). Accessibility Challenges in Mobile Learning. In: Zhang, Yu (Aimee) ed. Handbook of Mobile Teaching and Learning. Springer, pp. 337–350.

Rodrigues, David; Teixeira de Sampayo, Mafalda; Rodrigues, Eugénio; Rodrigues Gaspar, Adélio; Gomes, Álvaro and Henggeler Antunes, Carlos (2015). Online survey for collective clustering of computer generated architectural floor plans. In: 15th International Conference on Technology, Policy and Innovation, 17-19 Jun 2015, The Open University, Milton Keynes.

Rodriguez, Gabriela; Bowen, James and Stamboulis, Artemis (2015). Nano-hydroxyapatite deposition on titanium using peptide aptamers. In: 14th Annual Conference of the UK Society for Biomaterials, 25-26 Jun 2015, Coleraine, UK.

Rodriguez, Gabriela Melo; Bowen, James and Stamboulis, Artemis (2015). Functionalization of biomedical surfaces by peptide aptamers. In: Interdisciplinary Surface Science Conference (ISSC-20), 30 Mar - 2 Apr 2015, Birmingham, UK.

Rodriguez, Gabriela Melo; Bowen, James and Stamboulis, Artemis (2015). Functionalization of biomedical surfaces by peptide aptamers. In: 27th European Conference on Biomaterials, 30 Aug - 3 Sep 2015, Krakow, Poland.

Rooney, Matthew; Nuttall, William J. and Kazantzis, Nikolaos (2015). A dynamic model of the global uranium market and the nuclear fuel cycle. Resources Policy, 43 pp. 50–60.

Roy, Robin (2015). Consumer Product Innovation and Sustainable Design: The evolution and impacts of successful products. Abingdon, Oxfordshire, UK: Routledge.

Roy, Robin (2015). Consumer product innovation and sustainable design. In: Proceedings of Sustainable Innovation 2015, State of the Art: Sustainable Innovation and Design, 20th International Conference, The Centre for Sustainable Design, University of the Creative Arts, pp. 209–216.

Rucco, Matteo; Sousa-Rodriges, David; Merelli, Emanuela; Johnson, Jeffrey H.; Falsetti, Lorenzo; Nitti, Cinzia and Salvi, Aldo (2015). Neural hypernetwork approach for pulmonary embolism diagnosis. BMC Research Notes, 8(617)

Sabouri, Aydin; Anthony, Carl J.; Prewett, Philip D.; Bowen, James and Butt, Haider (2015). Effects of current on early stages of focused ion beam nano-machining. Materials Research Express, 2(5)

Sartori, Paolo; Quagliati, Damiano; Varagnolo, Silvia; Pierno, Matteo; Mistura, Giampaolo; Magaletti, Francesco and Casciola, Carlo Massimo (2015). Drop motion induced by vertical vibrations. New Journal of Physics, 17(11), article no. 113017.

Shonfield, Peter; Anderson, Jane and Boyd, Sarah (2015). A methodology for assessing the environmental benefits of DRAGON technology. Geomechanics and Tunnelling: Geomechanik und Tunnelbau, 8(4) pp. 333–339.

Singh, Aadesh P.; Kodan, Nisha; Dey, Avishek; Krishnamurthy, Satheesh and Mehta, Bodh R. (2015). Improvement in the structural, optical, electronic and photoelectrochemical properties of hydrogen treated bismuth vanadate thin films. International Journal of Hydrogen Energy, 40(12) pp. 4311–4319.

Slater, Rachel and Aiken, Mike (2015). Can't you count? Public service delivery and standardized measurement challenges - the case of community composting. Public Management Review, 17(8) pp. 1085–1102.

Slater, Rachel; Pearson, Victoria; Warren, James and Forbes, Tina (2015). Institutional change for improving accessibility in the design and delivery of distance learning – the role of faculty accessibility specialists at The Open University. Open Learning: The Journal of Open, Distance and e-learning, 30(1) pp. 6–20.

Smith, Alan M.; Paxton, Jennifer Z.; Hung, Yi-Pei; Hadley, Martin J.; Bowen, James; Williams, Richard L. and Grover, Liam M. (2015). Nanoscale crystallinity modulates cell proliferation on plasma sprayed surfaces. Materials Science and Engineering: C, 48(1) pp. 5–10.

Spear, Roger; Paton, Rob and Nicholls, Alex (2015). Public Policy for Social Finance in Context. In: Nicholls, Alex; Paton, Rob and Emerson, Jed eds. Social Finance. Oxford: Oxford University Press, pp. 460–487.

Spear, Roger and Thomas, Alan (2015). Worker Control in Worker Co-operatives? Journal of Co-operative Studies, 48 No 1(143) pp. 6–19.

Springell, Ross; Rennie, Sophie; Costelle, Leila; Darnbrough, James; Stitt, Camilla; Cocklin, Elizabeth; Lucas, Chris; Burrows, Robert; Sims, Howard; Wermeille, Didier; Rawle, Jonathan; Nicklin, Chris; Nuttall, William; Scott, Thomas and Lander, Gerard (2015). Water corrosion of spent nuclear fuel: radiolysis driven dissolution at the UO2/water interface. Faraday Discussions, 180 pp. 301–311.

Tahera, Khadija; Eckert, Claudia and Earl, Christopher (2015). Highlighting the importance of testing in the product development process. In: Proceedings of the 20th International Conference on Engineering Design (ICED15).

Toparli, M. Burak; Fitzpatrick, Michael E. and Gungor, Salih (2015). Determination of multiple near-surface residual stress components in laser peened aluminum alloy via the contour method. Metallurgical and Materials Transactions A, 46(9) pp. 4268–4275.

Trzcińska, Zuzanna; Bowen, James; Grossin, David; Peacock, Anna F. A. and Stamboulis, Artemis (2015). Adhesive polymeric thin film coatings as a method of immobilization of antibacterial agents on the surface of metallic implants. In: Interdisciplinary Surface Science Conference (ISSC-20), 30 Mar - 2 Apr 2015, Birmingham, UK.

Valdez Juarez, Alan Miguel (2015). Developing a business innovation perspective of electric vehicle uptake: lessons from Milton Keynes' electric vehicle programme. PhD thesis The Open University.

Van Renterghem, Timothy; Forssén, Jens; Attenborough, Keith; Jean, Philippe; Defrance, Jérôme; Hornikx, Maarten and Kang, Jian (2015). Using natural means to reduce surface transport noise during propagation outdoors. Applied Acoustics, 92 pp. 86–101.

Varagnolo, Silvia; Mistura, Giampaolo; Pierno, Matteo and Sbragaglia, Mauro (2015). Sliding droplets of Xanthan solutions: A joint experimental and numerical study. European Physical Journal E, 38, article no. 126.

Walsh, C. L.; Glendinning, S.; Castan Broto, V.; Dewberry, E. and Powell, M. (2015). Are wildcard events on infrastructure systems opportunities for transformational change? Futures, 67 pp. 1–10.

Warren, James; Morris, Emily; Enoch, Marcus; Padilla Magdaleno, Idalmis; Parra Arias, Zunilda and Guanche, Julia (2015). Developing an equitable and sustainable mobility strategy for Havana. Cities, 45 pp. 133–141.

Warren, James and Ortegon-Sanchez, Adriana (2015). Designing and modelling Havana’s future bus rapid transit. Proceedings of the Insitution of Civil Engineers - Urban Design and Planning, 169(2) pp. 104–119.

Welden, Natalie A.; Taylor, Alan C. and Cowie, Phillip R. (2015). Growth and gut morphology of the lobster Nephrops norvegicus. Journal of Crustacean Biology, 35(1) pp. 20–25.

Zapico, Miguel; Eckert, Claudia; Jowers, Iestyn and Earl, Christopher (2015). Towards product platform introduction: optimising commonality of components. In: Proceedings of the 20th International Conference on Engineering Design (ICED15).

Zhang, X. F.; Lu, W.J. and Qin, R. S. (2015). Oriented sulphides induced by electric current in medium carbon steel. Philosophical Magazine Letters, 95(2) pp. 101–109.

Zhang, X. F. and Qin, R. S. (2015). Preparation of surface coatings on a conductive substrate by controlled motion of graphene nanoflakes in a liquid medium. Applied Surface Science, 329 pp. 276–280.

Zhang, X. F. and Qin, R. S. (2015). Segregation of copper in an Fe–Cu alloy under pulsed electric current. Philosophical Magazine Letters, 95(7) pp. 367–375.

Zhang, Xinfang and Qin, Rongshan (2015). Controlled motion of electrically neutral microparticles by pulsed direct current. Scientific Reports, 5, article no. 10162.

Zhao, Yan; Qin, Rongshan; Chen, Dengfu; Wan, Xinming; Li, Yang and Ma, Mingtu (2015). A three dimensional cellular automata model for dendrite growth in non-equilibrium solidification of binary alloy. Steel Research International, 86(12) pp. 1490–1497.

2014To Top

Williams, Alison; Jones, Derek and Robertson, Judy eds. (2014). BITE: Recipes for Remarkable Research. Rotterdam: Sense Publishers.

Agrell, Cecilia; Bell, Simon; Bosco, Filipo; Diamond, Dermot; Emnéus, Jenny; Guiseppi-Elie, Anthony; Katsube, Atkins; Lynch, Jim; Morse, Stephen; Moussy, Francis G.; Murtagh, Fionn; Nair, P. K. R. and Weathers, Pam (2014). Transdisciplinary sustainability: the Council for Frontiers of Knowledge. International Journal of Transdisciplinary Research, 7(1) pp. 1–26.

Al-Hamaoy, Ahmed; Chikarakara, Evans; Hussein, Jawad; Gupta, Kapil; Kumar, Dinesh; Rao, M. S. Ramachandra; Krishnamurthy, Satheesh; Morshed, Mohammad; Fox, Eoin; Brougham, Dermot; He, Xiaoyun; Vázquez, Mercedes and Brabazon, Dermot (2014). Liquid phase pulsed laser ablation: a route to fabricate different carbon nanostructures. Applied Surface Science, 302 pp. 141–144.

Alexandrova, Assia; Rapanotti, Lucia and Horrocks, Ivan (2014). Innovation vs. Heritage: a Requirements Game to Encourage Creativity in Government Agencies' Legacy Systems Replacement Projects. In: Joint Proceedings of REFSQ-2014 Workshops, Doctoral Symposium, Empirical Track, and Posters, pp. 12–20.

Alexiou, Katerina; Alevizou, Giota and Zamenopoulos, Theodore (2014). Wards Corner Community Plan Case Study. In: Lockton, D; Greene, K.; Casey, A; Raby, L and Vickress, A eds. Variety Pack: Inspiring Digital Ideas From Community Projects. London: Helen Hamlyn Centre for Design.

Andrews, James W.; Cheneler, David and Bowen, James (2014). Measuring viscoelastic properties using compliant systems. In: Cell Adhesion Century: Culture Breakthrough, 28-29 Apr 2014, London, UK.

Araujo de Oliveira, Jeferson; Fitzpatrick, Michael E. and Kowal, Jan (2014). Residual stress measurements on a metal matrix composite using the contour method with brittle fracture. In: Advanced Materials Research, Trans Tech Publications, 996 pp. 349–354.

Arif, Tansel T. and Qin, Rong Shan (2014). A phase-field model for the formation of martensite and bainite. Advanced Materials Research, 922 pp. 31–36.

Ariyaratne, Chamindika I. and Moncaster, Alice M. (2014). Stand-alone calculation tools are not the answer to embodied carbon assessment. Energy Procedia, 62 pp. 150–159.

Ashley, S. F.; Lindley, B. A.; Parks, G. T.; Nuttall, W. J.; Gregg, R.; Hesketh, K. W.; Kannan, U.; Krishnani, P. D.; Singh, B.; Thakur, A.; Cowper, M. and Talamo, A. (2014). Fuel cycle modelling of open cycle thorium-fuelled nuclear energy systems. Annals of Nuclear Energy, 69 pp. 314–330.

Atta-Ankomah, Richmond (2014). China's Presence in Developing Countries' Technology Basket: The Case of Furniture Manufacturing in Kenya. PhD thesis The Open University.

Bashir, I.; Hill, T.; Taherzadeh, S.; Attenborough, K. and hornix, M. (2014). Reduction of surface transport noise by ground roughness. Applied Acoustics, 83(1) pp. 1–15.

Bashir, Imran (2014). Acoustical Exploitation of Rough, Mixed Impedance and Porous Surfaces Outdoors. PhD thesis The Open University.

Bell, Simon and Morse, Stephen (2014). Groups and indicators in post-industrial society. Sustainable Development, 22(3) pp. 145–157.

Bell, Simon and Wood-Harper, Trevor (2014). The innovation of Multiview3 for development professionals. Electronic Journal of Information Systems in Developing Countries, 63(3) pp. 1–25.

Berardi, Andrea; Mistry, Jay; Tschirhart, Celine; Bignante, Elisa; Haynes, Lakeram and Jafferally, Deirdre (2014). The COBRA Project: a community-based approach to public engagement in science. In: Proceedings of PCST 2014.

Birdi, Gurpreet; Shelton, Richard M.; Bowen, James; Oppenheimer, Pola Goldberg and Grover, Liam M. (2014). Elucidating the biological role of soluble silicon in early bone mineralisation. In: 26th European Conference on Biomaterials, 31 Aug - 3 Sep 2014, Liverpool, UK.

Blackmore, Chris (2014). Learning to change farming and water management practices in response to the challenges of climate change and sustainability. Outlook on Agriculture, 43(3) pp. 173–178.

Blackmore, Chris (2014). Learning systems, innovation and 'the wrong kind of weather'. In: 11th European International Farming Systems Association Symposium: Farming Systems Facing Global Challenges: Capacities and Strategies, 1-4 Apr 2014, Berlin, Germany.

Blackmore, Chris; Ison, Raymond and Reynolds, Martin (2014). Thinking differently about sustainability: experiences from the UK Open University. In: Filho, Walter Leal; Azeiteiro, Ulisses; Alves, Fátima and Caeiro, Sandra eds. Integrating Sustainability Thinking in Science and Engineering Curricula. World Sustainability Series. Cham: Springer, pp. 613–630.

Bostwick-Lorenzo Eiroa, Meredith and Jones, Derek (2014). The spatial and social constructs of creative situations. In: Williams, Alison; Jones, Derek and Robertson, Judy eds. BITE: Resipes for Remarkable Research. Rotterdam: Sense Publishers, pp. 260–266.

Bowen, James; Rossetto, Herbert L. and Kendall, Kevin (2014). Adhesion attenuation and enhancement in aqueous solutions. In: Cell Adhesion Century: Culture Breakthrough, 28-29 Apr 2014, London, UK.

Buys, K.; Sharp, D. and Laney, R. (2014). Developing a hybrid wind instrument: using a loudspeaker to couple a theoretical exciter to a real resonator. In: Proceedings of the International Symposium on Musical Acoustics pp. 331–336.

Buys, Kurijn (2014). The hybrid clarinet. The Open University. https://doi.org/10.21954/ou.rd.3848115.v1

Buys, Kurijn; Sharp, David and Laney, Robin (2014). Developing and evaluating a hybrid wind instrument excited by a loudspeaker. In: Proceedings of the Institute of Acoustics, pp. 294–303.

Caird, Sally (2014). Plug the university finance gap by turning teaching greener. The Conversation, London.

Caird, Sally; Lane, Andrew and Swithenby, Edward (2014). Greening Higher Education qualification programmes with online learning. In: Leal Filho, W.; Azeiteiro, U. and Caeiro, S. eds. E-learning and sustainability. Umweltbildung, Umweltkommunikation und Nachhaltigkeit - Environmental Education, Communication and Sustainability, 35. Frankfurt am Main, Berlin, Bern, Bruxelles, New York, Oxford, Wien: Peter Lang Scientific Publishers, pp. 105–116.

Castán Broto, Vanesa; Glendinning, Stephanie; Dewberry, Emma; Walsh, Claire and Powell, Mark (2014). What can we learn about transitions for sustainability from infrastructure shocks? Technological Forecasting and Social Change, 84 pp. 186–196.

Chapman, S. C.; Dendy, R. O.; Todd, T. N.; Watkins, N. W.; Webster, A. J.; Calderon, F. A. and Morris, J. (2014). Relationship of edge localized mode burst times with divertor flux loop signal phase in JET. Physics of Plasmas, 21(6), article no. 062302.

Chapman, S. C.; Dendy, R. O.; Webster, A. J.; Watkins, N. W.; Todd, T. N.; Morris, J. and JET EFDA Contributors (2014). An Apparent Relation between ELM Occurrence Times and the Prior Evolution of Divertor Flux Loop Measurements in JET. In: Proceedings of the 41st EPS Conference on Plasma Physics, article no. P1.010.

Cheneler, David; Bowen, James and Kaklamani, Georgia (2014). Transient bioimpedance monitoring of mechanotransduction in artificial tissue during indentation. Journal of Electrical Bioimpedance, 5(1) pp. 55–73.

Collins, Kevin (2014). Designing social learning systems for integrating social sciences into policy processes: Some experiences of water managing. In: Manfredo, M. J.; Vaske, J. J.; Rechkemmer, A. and Duke, E. A. eds. Understanding Society and Natural Resources: Forging New Strands of Integration across the Social Sciences. Amsterdam: Springer, pp. 229–251.

Colvin, John; Blackmore, Chris; Chimbuya, Sam; Collins, Kevin; Dent, Mark; Goss, John; Ison, Ray; Roggero, Pier Paolo and Seddaiu, Giovanna (2014). In search of systemic innovation for sustainable development: a design praxis emerging from a decade of social learning inquiry. Research Policy, 43 pp. 760–771.

Cook, M. (2014). Fluid transitions to more sustainable product service systems. Environmental Innovation and Societal Transitions, 12 pp. 1–13.

Duffy, Emer; Krishnamurthy, Satheesh; He, Xiaoyun; Nesterenko, Ekaterina P.; Brabazon, Dermot; Nesterenko, Pavel N. and Paull, Brett (2014). Preparation and properties of porous graphitic carbon monoliths embedded with nanodiamonds and other temperature-induced nano carbons. In: 2014 MRS Spring Meeting & Exhibit, 21-25 Apr 2014, San Francisco, CA.

Durodola, J. F.; Parikh, T. S.; Fellows, N. A. and Gungor, S. (2014). An etching based axisymmetric solution for the determination of residual stresses in long fibre reinforced metal matrix composites. Journal of Composite Materials, 48(19) pp. 2375–2386.

Eckert, Claudia (2014). Design for Values in the fashion and textile industry. In: van den Hoven, Jeroen; Vermaas, Pieter E. and van de Poel, Ibo eds. Handbook of Ethics, Values and Technological Design: Sources, Theory, Values and Application Domains. Springer Netherlands.

Eckert, Claudia; Isaksson, Ola and Earl, Christopher (2014). Design margins as a key to understanding design iteration. In: 2nd Biennial International Conference on Dynamics for Design; 26th International Conference on Design Theory and Methodology (IDETC/CIE 2014), 17-20 Aug 2014, Buffalo, New York, USA, ASME.

Eckert, Claudia and Stacey, Martin (2014). Constraints and conditions: drivers for design processes. In: Chakrabarti, Amaresh and Blessing, Lucienne eds. An Anthology of Theories and Models of Design: Philosophy, Approaches and Empirical Explorations. London: Springer, pp. 395–415.

Elliott-Bowman, B.; Cook, A. C.; Brown, P. and Qin, R. S. (2014). Electrothermomechanical processing of high carbon steels. Advanced Materials Research, 922 pp. 132–136.

Elsayed, A.; Mahmoud, S.; Al-Dadah, R.; Bowen, J. and Kaialy, W. (2014). Experimental and numerical investigation of the effect of pellet size on the adsorption characteristics of activated carbon/ethanol. Energy Procedia, 61 pp. 2327–2330.

Elsayed, Ahmed; Al-Dadah, Raya; Mahmoud, Saad; Elshaer, Amr and Bowen, James (2014). Investigation of efficient adsorbents using transient analysis of adsorption chillers with Simulink. In: Proceedings of the International Conference on Heat Transfer and Fluid Flow, International ASET Inc., article no. 199.

Enoch, Marcus P. and Warren, James (2014). Discussion: Potential for carfree development in the UK - categorising carfree communities. Urban Design and Planning Proceedings of the Insitution of Civil Engineers, 167(1) pp. 42–43.

Fitton, Sarah L. and Moncaster, Alice (2014). The social value of flood infrastructure design. In: ATINER Conference Paper Series, Athens Institute for Education and Research, Athens, article no. PLA2014-1083.

Fitton, Sarah L.; Moncaster, Alice and Guthrie, Peter (2014). Flood alleviation design: adopting a social perspective. In: 6th International Conference on Flood Management “Floods in a changing Environment” (ICFM6), 16-18 Sep 2014, São Paulo, Brazil.

Fitton, Sarah Louise; Moncaster, Alice and Guthrie, Peter (2014). Investigating the perspectives of social value for a flood alleviation scheme. Athens Journal of Social Sciences, 1(4) pp. 247–260.

Floyd, Joshua; Iaquinto, Benjamin L.; Ison, Ray and Collins, Kevin (2014). Managing complexity in Australian urban water governance: transitioning Sydney to a water sensitive city. Futures, 61 pp. 1–12.

Foster, Natalie; Hudson, Malcolm D.; Bray, Simon and Nicholls, Robert J. (2014). Research, policy and practice for the conservation and sustainable use of intertidal mudflats and saltmarshes in the Solent from 1800 to 2016. Environmental Science & Policy, 38 pp. 59–71.

Francis, J. A.; Moat, R. J.; Abdolvand, H. and Forsey, A. (2014). An assessment of the mechanisms of transformation plasticity in SA508 Grade 3 steel during simulated welding thermal cycles. In: Materials Science Forum, 777 pp. 188–193.

Frankel, P. G.; Wei, J.; Francis, E. M.; Forsey, A.; Ni, N.; Lozano-Perez, S.; Ambard, A.; Blat-Yrieix, M.; Comstock, R. J.; Hallstadius, L.; Moat, R.; Grovenor, C. R. M.; Lyon, S.; Cottis, R. A. and Preuss, M. (2014). Effect of Sn on Corrosion Mechanisms in Advanced Zr-Cladding for Pressurised Water Reactors. In: Zirconium in the Nuclear Industry: 17th Volume, pp. 404–437.

Gavotsis, Efstratios and Moncaster, Alice (2014). Practical limitations in Embodied Energy and Carbon measurements, and how to address them: a UK case study. In: World Sustainable Building Conference WSB14, 28-30 Oct 2014, Barcelona.

Gavotsis, Efstratios and Moncaster, Alice (2014). Industry and policy recommendations for the improvement of embodied energy and carbon accounting, based on a study during construction stage. In: 4th Annual International Conference on Architecture, 7-10 Jul 2014, Athens, Greece.

Giller, K; Bell, S; Mock, N and Hijmans, R (2014). Data, Metrics and Monitoring in CGIAR - a strategic study. CGIAR, Rome, Italy.

Gillespie, Marie; Bell, Simon; Wilding, Colin; Webb, Alban; Fisher, Ali; Voss, Alex; Smith, Andrew W. M.; Macfarlane, Jess; Martin, Nat; Foster, Tot and Lvov, Ilia (2014). Understanding the Changing Cultural Value of the BBC World Service and the British Council. Arts and Humanities Research Council, Swindon.

Githinji, David; Northover, Shirley and Bouchard, P. John (2014). Electron backscatter diffraction (EBSD) measurement of accumulated strain. In: 3rd International ECCC- Creep & Fracture Conference: Creep & Fracture in High Temperature Components, 5-7 May 2014, Rome, Italy.

Githinji, David Njuguna (2014). Characterisation of Plastic and Creep Strains From Lattice Orientation Measurements. PhD thesis The Open University.

Green, Sophie; Baird, Andy J.; Boardman, Carl P. and Gauci, Vincent (2014). A mesocosm study of the effect of restoration on methane (CH4) emissions from blanket peat. Wetlands Ecology and Management, 22(5) pp. 523–537.

Grimston, Malcolm; Nuttall, William J. and Vaughan, Geoff (2014). The siting of UK nuclear reactors. Journal of Radiological Protection, 34(2) R1-R24.

He, Yanping; Bowen, James; Andrews, James W.; Liu, Min; Smets, Johan and Zhang, Zhibing (2014). Adhesion of perfume-filled microcapsules to model fabric surfaces. Journal of Microencapsulation, 31(5) pp. 430–439.

Hibbert, William A.; Sharp, David B.; Taherzadeh, Shahram and Perrin, Robert (2014). Partial frequencies and Chladni’s law in church bells. Open Journal of Acoustics, 4(2) pp. 70–77.

Hincliffe, Steve; Levidow, Les and Oreszczyn, Sue (2014). Engaging cooperative research. Environment and Planning A, 46(9) pp. 2080–2094.

Horrocks, Ivan (2014). Developing a capstone research module for multiple masters qualifications at the Open University (UK): the case of T847. In: Proceedings of the 13th European Conference on Research Methodology for Business and Management ECRM 2014, Academic Conferences and Publishing Limited pp. 177–184.

Hosseinzadeh, F.; Hossain, S.; Truman, C. E. and Smith, D. J. (2014). Measurement and prediction of residual stresses in quenched stainless steel components. Experimental Mechanics, 54(7) pp. 1151–1162.

Hosseinzadeh, Foroogh; Kowal, Jan and Bouchard, Peter John (2014). Towards good practice guidelines for the contour method of residual stress measurement. Journal of Engineering (Online only).

Hu, Feng; Wu, Kaiming; Hodgson, Peter Damian and Shirzadi, Amir Abbas (2014). Refinement of retained austenite in super-bainitic steel by a deep cryogenic treatment. ISIJ International, 54(1) pp. 222–226.

Hu, Feng; Wu, Kaiming; Hou, Tingping and Shirzadi, Amir Abbas (2014). Effect of Tempering Temperature on the Microstructure and Hardness of a Super-bainitic Steel Containing Co and Al. ISIJ International, 54(4) pp. 926–931.

Imrie, Rob and Luck, Rachael (2014). Designing inclusive environments: rehabilitating the body and the relevance of universal design. Disability and Rehabilitation, 36(16) pp. 1315–1319.

Ison, R. L. (2014). Systems and design: mutually influencing disciplines and practices? In: Proceedings of the 58th Meeting of ISSS ‘Learning Across Boundaries: Exploring the Variety of Systemic Theory and Practice’, Jul 2014, Washington, D.C.

Ison, R. L.; Carberry, P.; Davies, J.; Hall, A.; McMillan, L.; Maru, Y.; Pengelly, B.; Reichelt, N.; Stirzaker, R.; Wallis, P. J.; Watson, I. and Webb, S. (2014). Program projects and learning inquiries: institutional mediation of innovation in research for development. In: European Farming Systems Research Conference, 2-4 Apr 2014, Berlin, Germany.

Ison, R. L. and Schlindwein, S. (2014). Environmental cyber-systemic governance and social processes. In: WOSC 2014: International Congress on Systems and Cybernetics, 15-17 Oct 2014, Ibagué, Colombia.

Ison, R. L. and Schlindwein, S. (2014). Environmental cyber-systemic governance and social processes. In: WOSC 16th Congress (WOSC 2014), 15-17 Oct 2014, Ibagué, Colombia.

Ison, Ray (2014). Cybersystemics, institutional complexity and human co‐evolution. In: 50th Anniversary Conference of the American Society for Cybernetics, 3-9 Aug 2014, Washington D.C..

Ison, Ray and Blackmore, Chris (2014). Designing and developing a reflexive learning system for managing systemic change. Systems, 2(2) pp. 119–136.