Browse by Academic Unit/Department

2013

Papaioannou, Theo and Butcher, Melissa eds. (2013). International Development in a Changing World. The Open University's International Development series. London: Bloomsbury Academic.

Adwera, Andrew; Hanlin, Rebecca and Johnson, Hazel (2013). Developmental education for innovation: lessons from an experience in Kenya. International Journal of Technological Learning, Innovation and Development, 6(3) (In press).

Bacon, D.H.; Edwards, L.; Moffatt, J. E. and Fitzpatrick, M. E. (2013). Fatigue and fracture of a 316 stainless steel metal matrix composite reinforced with 25% titanium diboride. International Journal of Fatigue, 48 pp. 39–47.

Bashir, Imran; Taherzadeh, Shahram and Attenborough, Keith (2013). Diffraction assisted rough ground effect: models and data. Journal of the Acoustical Society of America, 133(3) pp. 1281–1292.

Borda-Rodriguez, Alexander and Vicari, Sara (2013). Resilience and Ugandan Cooperatives: A Literature Review. Innovation, Knowledge and Development, The Open University, Milton Keynes.

Caird, Sally; Lane, Andrew; Potter, Stephen and Sackett, Mike (2013). SusTEACH at the Open University. The Open University.

Frankel, P.; Wei, J.; Smith, J.; Lyon, S.; Cottis, R. A.; Preuss, M.; Ni, N.; Lozano-Perez, S.; Moore, K. L.; Yardley, S. S.; Grovenor, C. R. M.; Smith, G.; Sykes, J.; Ambard, A.; Blat-Yrieix, M.; Comstock, R. J.; Hallstadius, L.; Francis, E.; Forsey, A. and Moat, R. (2013). The effect of Sn on corrosion mechanisms in advanced Zr-cladding for pressurised water reactors. In: 17th International Symposium on Zirconium in the Nuclear Industry, 03-07 February 2013, Hyderabad.

Frederickson, J.; Boardman, C. P.; Gladding, T. L.; Simpson, A. E.; Howell, G. and Sgouridis, F. (2013). Evidence: Biofilter performance and operation as related to commercial composting. Environment Agency, Bristol.

Hodgson, Paul; Potter, Stephen; Warren, James and Gillingwater, David (2013). Can bus really be the new tram? Research in Transportation Economics, 39(1) pp. 158–166.

Hosseinzadeh, F. and Bouchard, P. J. (2013). Mapping multiple components of the residual stress tensor in a large P91 steel pipe girth weld using a single contour cut. Experimental Mechanics, 53(2) pp. 171–181.

Hosseinzadh Torknezhad, F.; Ledgard, P. and Bouchard, P. J. (2013). Controlling the cut in contour residual stress measurements of electron beam welded Ti-6Al-4V alloy plates. Experimental Mechanics, 53(5) pp. 829–839.

Hu, Feng; Wu, Kaiming; Hou, Tingping and Shirzadi, Amir A. (2013). Tempering stability of retained austenite in nanostructured dual-phase steels. Materials Science and Technology (In press).

Huzair, Farah; Borda-Rodriguez, Alexander; Upton, Mary and Mugwagwa, Julius (2013). An interdisciplinary and development lens on knowledge translation. Science and Public Policy (In press).

Jain, Anand; O Connolly, Jack; Woolley, Richard; Krishnamurthy, Satheesh and Marsili, Enrico (2013). Extracellular electron transfer mechanism in Shewanella loihica PV- 4 biofilms formed at indium tin oxide and graphite electrodes. International Journal of Electrochemical Science, 8 pp. 1778–1793.

Jones, Derek and Lloyd, Peter (2013). Which way is up? Space and place in virtual learning environments for design. In: 2nd International Conference for Design Education Researchers, 14-17 May 2013, Oslo.

Kale, Dinar; Hanlin, Rebecca and Chataway, Joanna (2013). New drugs and health technologies for low-income populations: will the private sector meet the needs of low-income populations in developing countries? Innovation and Development, 3(1) pp. 121–137.

Krishnamurthy, S.; Butenko, Yu. V.; Dhanak, V. R.; Hunt, M. R. C. and Šiller, L. (2013). In situ formation of onion-like carbon from the evaporation of ultra-dispersed nanodiamonds. Carbon, 52 pp. 145–149.

Krynkin, Anton; Umnova, Olga; Taherzadeh, Shahram and Attenborough, Keith (2013). Analytical approximations for low frequency band gaps in periodic arrays of elastic shells. Journal of the Acoustical Society of America, 133(2) pp. 781–791.

Laik, A.; Shirzadi, A. A.; Tewari, R.; Kumar, Anish; Jayakumar, T. and Dey, G. K. (2013). Microstructure and interfacial reactions during active metal brazing of stainless steel to titanium. Metallurgical and Materials Transactions A (In press).

Lampert, Ben (2013). Collective transnational power and its limits: London-based Nigerian organisations, development at ‘home’ and the importance of local agency and the ‘internal diaspora’. Journal of Ethnic and Migration Studies (In Press).

Levidow, Les (2013). EU criteria for sustainable biofuels: accounting for carbon, depoliticising plunder. Geoforum, 44(1) pp. 211–223.

Levidow, Les; Birch, Kean and Papaioannou, Theo (2013). Divergent paradigms of European agro-food innovation: the Knowledge-Based Bio-Economy (KBBE) as an R&D agenda. Science, Technology & Human Values, 38(1) pp. 94–125.

Levidow, Les and Papaioannou, Theo (2013). State imaginaries of the public good: shaping UK innovation priorities for bioenergy. Environmental Science & Policy, 30 pp. 36–49.

Lloyd, Peter and Jones, Derek (2013). Normal creativity : What 1,038 t‐shirts can tell you about design education. In: 2nd International Conference for Design Education Researchers, 14-17 May 2013, Oslo.

Martin, Keith (2013). Hydrostatic journal bearings. In: Wang, Q. Jane and Chung, Yip-Wah eds. Encyclopedia of Tribology. New York, USA: Springer Science & Business Media.

Masteika, V.; Kowal, J.; Braithwaite, N St.J and Rogers, T. (2013). The effect of atmospheric moisture on crack propagation in the interface between directly bonded silicon wafers. Microsystem Technologies, 19(5) pp. 705–712.

Meilkhova, O.; Čížek, J.; Lukáč,, F.; Vlček, M.; Novotný, M.; Bulíř, J.; Lančok, J.; Anwand, W.; Brauer, G.; Connolly, J.; McCarthy, E.; Krishnamurthy, S. and Mosnier, J.-P. (2013). Hydrogen absorption in thin ZnO films prepared by pulsed laser deposition. Journal of Alloys and Compounds (In press).

Mohan, Giles (2013). Migrants as agents of South-South Cooperation: the case of Chinese in Africa. In: Dargin, Justin ed. The Rise Of The Global South: Philosophical, Geopolitical and Economic Trends of the 21st Century. London: World Scientific, (In press).

Mohan, Giles and Lampert, Ben (2013). Negotiating China: reinserting African agency into China-Africa relations. African Affairs, 112(446) pp. 92–110.

Monk, John (2013). Arrows can be dangerous. tripleC, 11(1) pp. 67–92.

Mootien, Namasoondrum P.; Warren, James P.; Morris, Dick and Enoch, Marcus P. (2013). Mapping expert perspectives of the aviation sector. International Journal of Environmental Technology and Management, 16(3) pp. 179–202.

Mugwagwa, Julius (2013). Revealing the footprint: supranational organizations and transnational governance of biotechnology in southern Africa. Regional Science Policy and Practice (In press).

Mugwagwa, Julius; Hanlin, Rebecca; Chataway, Jo and Muraguri, Lois (2013). The Role of the Product Development Partnership as a Translational Mechanism for Delivering Health Solutions in Low-Resource Settings. In: Mittra, James and Milne, Christopher-Paul eds. Translational Medicine: The Future of Therapy. Pan Stanford Publishing Pte. Ltd, pp. 233–256.

Neal, Sarah; Bennett, Katy; Cochrane, Allan and Mohan, Giles (2013). Living multiculture: understanding the new spatial and social relations of ethnicity and multiculture in England. Environment and Planning C: Government and Policy, 31(2) pp. 308–323.

Ozdemir, Vural; Borda-Rodriguez, Alexander; Dove, Edward S; Ferguson, Lynette R; Huzair, Farah; Manolopoulos, Vangelis G.; Masellis, Mario; Milius, Djims; Warnich, Louise and Srivastava, Sanjeeva (2013). Editorial: public health pharmacogenomics and the design principles for global public goods – moving genomics to responsible innovation. Current Pharmacogenomics and Personalized Medicine, 11(1) pp. 1–4.

Papaioannou, Theo (2013). Innovation and development in search of a political theory of justice. International Journal of Technology and Globalisation (In press).

Potter, Stephen and Atchulo, Abukari (2013). A review of ten years of CO2-based company car taxation: impact and potential. In: Universities Transport Studies Group Annual Conference, 3-5 January 2013, Oxford (forthcoming).

Ramani, Meghana; Ponnuswamy, S.; Muthamizhchelvana, Chellamuthu; Cullen, Jane; Krishnamurthy, Satheesh and Marsili, Enrico (2013). Morphology-directed synthesis of ZnO nanostructures and their antibacterial activity. Colloids and Surfaces B: Biointerfaces, 105 pp. 24–30.

Tahera, Khadija; Eckert, Claudia and Earl, Christopher (2013). Optimizing overlap between testing and design in engineering product development processes. In: Proceedings of the 23rd CIRP Design Conference, 14 - 15 March 2013, Bochum, Germany (Forthcoming).

Traore, Y.; Paddea, S.; Bouchard, P. J. and Gharghouri, M. A. (2013). Measurement of the residual stress tensor in a compact tension weld specimen. Experimental Mechanics, 53(4) pp. 605–618.

Warren, James and Ieromonachou, Petros (2013). Can rail/sail compete with air travel to Cyprus? A comparison of emissions. Transport Research Part D: Transport and Environment, 18 pp. 86–90.

Wield, David; Hanlin, Rebecca; Mittra, James and Smith, James (2013). Twenty-first century bioeconomy: global challenges of biological knowledge for health and agriculture. Science and Public Policy, 40(1) pp. 17–24.

2012

Butcher, Melissa and Papaioannou, Theo eds. (2012). New Perspectives in International Development. The Open University's International Development series. London: Bloomsbury Academic.

Everett, Robert; Boyle, Godfrey; Peake, Stephen and Ramage, Janet eds. (2012). Energy Systems and Sustainability: Power for a Sustainable Future (2nd ed.). Oxford: Oxford Univerity Press.

Garner, Steven and Evans, Chris eds. (2012). Design and Designing. A Critical Introduction. London: Berg (Forthcoming).

Nuttall, William; Clarke, Richard and Glowacki, Bartek eds. (2012). The Future of Helium as a Natural Resource. Routledge Explorations in Environmental Economics. Abingdon, UK: Routledge.

Ahmed, R.; Faisal, N. H.; Paradowska, A. M. and Fitzpatrick, M. E. (2012). Residual strain and fracture response of Al2O3 coatings deposited via APS and HVOF techniques. Journal of Thermal Spray Technology, 21(1) pp. 23–40.

Ahmed, R.; Fitzpatrick, M. E. and Faisal, N. H. (2012). A comparison of neutron diffraction and hole-drilling residual strain measurements in thermally sprayed coatings. Surface and Coatings Technology, 206(19-20) pp. 4180–4185.

Alevizou, Giota (2012). The dark side of the knowledge commons?: Open educational media and tensions surrounding autonomy and novel spheres of control. In: ECREA 2012 Pre-Conference: Imposing Freedoms: The Role of Copyright, Privacy and Censorship Governance in the Re/definition of Rights in Digital Media , 23 October 2012, Istanbul, Turkey.

Alevizou, Panagiota (2012). Open to interpretation?: productive frameworks for understanding audience engagement with OER. In: Cambridge 2012: Innovation and Impact – Openly Collaborating to Enhance Education, a joint meeting of OER12 and OpenCourseWare Consortium Global 2012, 16-18 April 2012, Cambridge, UK.

Alevizou, Panagiota (2012). Open to interpretation? Productive frameworks for understanding audience engagement with Open Educational Resources. Revista Educação e Cultura Contemporânea, 9(18) pp. 3–19.

Alevizou, Panagiota; Galley, Rebecca and Conole, Grainne (2012). Collectivity, performance and self-representation: analysing Cloudworks as a public space for networked learning and reflection. In: Dirckinck-Holmfeld, Lone ; Hodgson, Vivien and McConnell, David eds. Exploring the Theory, Pedagogy and Practice of Networked Learning. New York: Springer, pp. 75–97.

Ashley, Stephen F.; Parks, Geoffrey T.; Nuttall, William J.; Boxall, Colin and Grimes, Robin G. (2012). Thorium fuel has risks. Nature, 492(7427) pp. 31–33.

Attenborough, Keith; Wright, Matthew and Umnova, Olga (2012). Mathematics summer schools for acoustics research training. Journal of the Acoustical Society of America, 131(3) pp. 2532–2538.

Bhamji, I.; Moat, R. J.; Preuss, M.; Threadgill, P. L.; Addison, A. C. and Peel, M. J. (2012). Linear friction welding of aluminium to copper. Science and Technology of Welding & Joining, 17(4) pp. 314–320.

Bhamji, I.; Preuss, M.; Moat, R. J.; Threadgill, P. L. and Addison, A. C. (2012). Linear friction welding of aluminium to magnesium. Science and Technology of Welding & Joining (In Press).

Birch, Kean; Levidow, Les and Papaioannou, Theo (2012). Self-fulfilling prophecies of the European knowledge-based bio-economy: the discursive shaping of institutional and policy frameworks in the bio-pharmaceuticals sector. Journal of the Knowledge Economy (In press).

Blyth, Richard; Schadewitz, Nicole; Sharp, Helen; Woodroffe, Mark; Rajah, Dino and Turugare, Ranganai (2012). A frame signature matrix for analysing and comparing interaction design behaviour. In: BCS HCI Conference, 12-14 September 2012, Birmingham.

Bonneuil, Christophe and Levidow, Les (2012). How does the World Trade Organisation know? The mobilization and staging of scientific expertise in the GMO trade dispute. Social Studies of Science, 42(1) pp. 75–100.

Bouchard, P. John (2012). Fourier basis for the engineering assessment of cracks in residual stress fields. Engineering Fracture Mechanics, 91 pp. 37–50.

Bouchard, P. John; Ledgard, Peter; Hiller, Stan and Hosseinzadh Torknezhad, Foroogh (2012). Making the cut for the contour method. In: 15th International Conference on Experimental Mechanics, 22-27 July 2012, Porto, Portugal.

Burnley, Stephen and Coleman, Terry (2012). Factors influencing the life cycle burdens of the recovery of energy from residual municipal waste. In: Venice 2012, Fourth International Symposium on Energy from Biomass and Waste, 12-14 November 2012, Venice.

Burnley, Stephen; Phillips, Rhiannon and Coleman, Terry (2012). Carbon and life cycle implications of thermal recovery from the organic fractions of municipal waste. International Journal of Life Cycle Assessment (In press).

Caird, Sally; Roy, Robin and Potter, Stephen (2012). Domestic heat pumps in the UK: user behaviour, satisfaction and performance. Energy Efficiency, 5(3) pp. 283–301.

Cardin, Michel-Alexandre; Steer, Steven J.; Nuttall, William J.; Parks, Geoffrey T.; Gonçalves, Leonardo V.N. and de Neufville, Richard (2012). Minimizing the economic cost and risk to accelerator-driven subcritical reactor technology. Part 2: The case of designing for flexibility. Nuclear Engineering and Design, 243 pp. 120–134.

Chataway, Joanna; Fry, Caroline; Marjanovic, Sonja and Yaqub, Ohid (2012). Public-private collaborations and partnerships in stratified medicine: making sense of new interactions. New Biotechnology, 29(6) pp. 732–740.

Chroneos, A. and Dimoulas, A. (2012). Defect configurations of high-k cations in germanium. Journal of Applied Physics, 111(2)

Chroneos, A.; Schwingenschlögl, U. and Dimoulas, A. (2012). Impurity diffusion, point defect engineering, and surface/interface passivation in germanium. Annalen der Physik, 524(3-4) pp. 123–132.

Chroneos, A.; Schwingenschlögl, U.; Schuster, C. and Grimes, R. W. (2012). Electronegativity and doping in semiconductors. Journal of Applied Physics, 112(4)

Chroneos, A.; Tahini, A.; Grimes, R. W.; Schwingenschlogl, U. and Dimoulas, A. (2012). Strain-induced changes to the electronic structure of germanium. Journal of Physics: Condensed Matter, 24(19) p. 195802.

Dewberry, Emma (2012). Eco-intelligence: Designing for the Real World. In: Garner, Steve and Evans, Chris eds. Design and Designing: A Critical Introduction. London: Berg, (In press).

Dorman, M.; Toparli, M. B.; Smyth, N.; Cini, A.; Fitzpatrick, M. E. and Irving, P. E. (2012). Effect of laser shock peening on residual stress and fatigue life of clad 2024 aluminium sheet containing scribe defects. Materials Science and Engineering: A, 548 pp. 142–151.

Eckert, Claudia; Blackwell, Alan; Stacey, Martin; Earl, Christopher and Church, Luke (2012). Sketching across design domains: roles and formalities. Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 26(3) pp. 245–266.

Eckert, Claudia; Ruckpaul, Anne; Alink, Thomas and Albers, Albert (2012). Variations in functional decomposition for an existing product: experimental results. Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 26(2) pp. 107–128.

Eckert, Claudia M.; Stacey, Martin; Wyatt, David and Garthwaite, Pam (2012). Change as little as possible: creativity in design by modification. Journal of Engineering Design, 23(4) pp. 337–360.

Endean, Mark; Clay, Kath and Burnley, Stephen (2012). Evaluation of residential school activity ‘Product re-engineering for enhanced end-of-life performance. In: Engineering Education 2012, 18-20 September 2012, Coventry.

Farooki, Masuma and Mohan, Giles (2012). The rising powers as drivers of development. In: Butcher, Melissa and Papaioannou, Theo eds. International Development in a Changing World. London: Bloomsbury Academic, (In press).

Galley, Rebecca; Conole, Grainne and Alevizou, Panagiota (2012). Community Indicators: A framework for observing and supporting community activity on Cloudworks. Interactive Learning Environments (in press).

Garner, Steven and Evans, Chris (2012). Motivation and the learningscape of design. In: Garner, Steven and Evans, Chis eds. Design and Designing. A Critical Introduction. London: Berg, (In press).

Graham, Janice E.; Borda-Rodriguez, Alexander and Huzair, Farah (2012). Global vaccine safety blueprint: the landscape analysis (survey of regulators). World Health Organization, Geneva.

Graham, Janice E.; Borda-Rodriguez, Alexander; Huzair, Farah and Zinck, Emily (2012). Capacity for a global vaccine safety system: the perspective of national regulatory authorities. Vaccine, 30 pp. 4953–4959.

Haigh, R.D.; Hutchings, M. T.; James, J. A. ; Ganguly, S.; Mizuno, R.; Ogawa, K.; Okido, S.; Paradowska, A.M. and Fitzpatrick, M. E. (2012). Neutron diffraction residual stress measurements on girth-welded 304 stainless steel pipes with weld metal deposited up to half and full pipe wall thickness. International Journal of Pressure Vessels and Piping (In press).

Hanan, Deidre; Burnley, Stephen and Cooke, David (2012). A multi-criteria decision analysis assessment of waste paper management options. Waste Management (In press).

Hanlin, Rebecca and Hanlin, Christopher (2012). The view from below: ‘lock in’ and local procurement in the African gold mining sector. Resources Policy, 37(4) pp. 468–474.

Hanlon, Joseph (2012). Debt and development. In: Haslam, Paul; Schafer, Jessica and Beaudet, Paul eds. Introduction to International Development: Approaches, Actors, and Issues (2nd ed). Oxford: Oxford University Press, (In press).

Hanlon, Joseph and Cunguara, Benedito (2012). Whose wealth is it anyway? mozambique’s outstanding economic growth with worsening rural poverty. Development and Change

Harmon, Shawn and Kale, Dinar (2012). A view against the grain? The role of regulation in Argentine and Indian bioscience innovation. In: 2nd Joint BISA-ISA International Conference, 20-22 June, 2012, Edinburgh.

Hetherington, Robina; Laney, Robin and Peake, Stephen (2012). Zone modelling and visualisation: keys to the design of low carbon buildings. In: 16th International Conference on Information Visualisation (IV), 11 -13 July 2012, Montpellier, France.

Hosseinzadh, Foroogh; Toparli, Muhammed Burak and Bouchard, Peter John (2012). Slitting and Contour Method Residual Stress Measurements in an Edge Welded Beam. Journal of Pressure Vessel Technology, 134(1) 011402-1-011402-6.

Hu, F.; Wu, K. M. and Shirzadi, A. A. (2012). Influence of Co and Al on pearlitic transformation in superbainitic steels. Ironmaking & Steelmaking, 39(7) pp. 535–539.

Huzair, Farah (2012). The influenza vaccine innovation system and lessons for PDPs. Human Vaccines & Immunotherapeutics, 8(3) pp. 398–401.

Huzair, Farah and Borda-Rodriguez, Alexander (2012). Challenges for the Application and Development of Omics Health Technologies in Developing Countries. Drug Development Research (Early View).

Huzair, Farah and Papaioannou, Theo (2012). UK Biobank: consequences for commons and innovation. Science and Public Policy, 39(4) pp. 500–512.

Jain, A.; Zhang, X.; Pastorella, G.; Connolly, J.O.; Barry, N.; Woolley, R.; Krishnamurthy, S. and Marsili, E. (2012). Electron transfer mechanism in Shewanella loihica PV-4 biofilms formed at graphite electrode. Bioelectrochemistry, 87 pp. 28–32.

Jazaeri, H.; Bouchard, P. J.; Hutchings, M. and Lindner, P. (2012). Study of creep cavitation in a stainless steel weldment. In: 4th International Conference on Integrity of High Temperature Welds, 25-27 September 2012, London.

Johnson, Hazel; Pinder, Richard and Wilson, Gordon (2012). Engagement, learning and emancipatory development management: a commentary. Journal of International Development, 24(5) pp. 623–636.

Johnson, J.; Buckingham Shum, S.; Willis, A.; Bishop, S.; Zamenopoulos, T.; Swithenby, S.; MacKay, R.; Merali, Y.; Lorincz, A.; Costea, C.; Bourgine, P.; Louçã, J.; Kapenieks, A.; Kelly, P.; Caird, S.; Bromley, J.; Deakin Crick, R.; Goldspink, C.; Collet, P.; Carbone, A. and Helbing, D. (2012). The FuturICT education accelerator. European Physical Journal - Special Topics, 214 pp. 215–243.

Johnson, Jeffrey (2012). Cities: systems of systems of systems. In: Portugali, Juval; Meyer, Han; Stolk, Egbert and Tan, Ekim eds. Complexity Theories of Cities Have Come of Age. Springer Complexity. Berlin: Springer-Verlag, (In press).

Jones, Derek and Dewberry, Emma (2012). Building Information Modelling design ecologies - a new model? In: First UK Academic conference on BIM: Conference Proceedings, 5-9 September 2012, Northumbria University.

Kale, Dinar (2012). Sources of innovation and technology capability development in the Indian automobile industry. International Journal of Institution and Economics, 4(2) .

Kale, Dinar (2012). Innovative capability development in the Indian pharmaceutical industry. International Journal of Innovation and Technology Management, 9(2) p. 1250013.

Kale, Dinar (2012). India. In: Amann, Edmund and Cantwell, John eds. Innovative firms in emerging market countries. Oxford: Oxford University Press, pp. 148–191.

Kale, Dinar (2012). Transnational corporations: significance and impact. In: Papaioannou, Theo and Butcher, Melissa eds. International development in a changing world. London: Bloomsbury Academic, (In press).

Kaplinsky, Raphael; Farooki, Masuma; Alcorta, Ludovico and Rodousakis, Niki (2012). Promoting Industrial Diversification in Resource Intensive Economies: The Experiences of Sub-Saharan Africa and Central Asia Regions. Vienna: United Nations Industrial Development Organisation.

Koc, Reyyan; Kazantzis, Nikolaos K.; Nuttall, William J. and Ma, Yi Hua (2012). Economic assessment of inherently safe membrane reactor technology options integrated into IGCC power plants. Process Safety and Environmental Protection, 90(5) pp. 436–450.

Kowal, Paulina; Sharp, David and Taherzadeh, Shahram (2012). Correlating differences in the playing properties of five student model clarinets with physical differences between them. In: Acoustics 2012, 23-27 April 2012, Nantes, France.

Kreitmayer, Stefan; Rogers, Yvonne; Laney, Robin and Peake, Stephen (2012). From participatory to contributory simulations: changing the game in the classroom. In: Conference on Human Factors in Computing Systems, 05-10 May 2012, Austin, Texas, USA.

Kruse, Roland and Taherzadeh, Shahram (2012). The influence of environmental conditions on estimation of source distance and height using a single vertical array. Applied Acoustics, 73(3) pp. 198–208.

Kundu, A.; Bouchard, P. J.; Kumar, S.; Venkata, K. A.; Francis, J. A.; Paradowska, A.; Dey, G. K. and Truman, C. E. (2012). Residual stresses in P91 steel electron beam welds. Science and Technology of Welding & Joining (Early Access).

Lampert, Ben (2012). Diaspora and development? London-based Nigerian organisations and the transnational politics of socio-economic status and gender. Development Policy Review, 30(2) pp. 149–167.

Lelito, J.; Zak, P. L.; Greer, A. L.; Suchy, J. S.; Krajewski, W. K.; Gracz, B.; Szucki, M. and Shirzadi, A. A. (2012). Crystallization model of magnesium primary phase in the AZ91/SiC composite. Composites Part B: Engineering, 43(8) pp. 3306–3309.

Lelito, Janusz; Zak, Pawel L.; Shirzadi, Amir A.; Greer, A. L.; Krajewski, Witold K.; Suchy, Jozef S.; Haberl, Katharina and Schumacher, Peter (2012). Effect of SiC reinforcement particles on the grain density in a magnesium-based metal-matrix composite: modelling and experiment. Acta Materialia, 60(6-7) pp. 2950–2958.

Levidow, Les (2012). Contending European agendas for agricultural innovation. In: Barbier, Marc and Elzen, Boelie eds. System Innovations, Knowledge Regimes and Design Practices towards Transitions for Sustainable Agriculture. Paris, France: INRA, pp. 171–192.

Levidow, Les (2012). Generating regulatory futures: From agbiotech blockages to a bioeconomy? In: Howlett , Michael and Laycock, David eds. Regulating Next Generation Agri-Food Biotechnologies: Lessons from European, North American and Asian Experiences. Genetics and Society. London, UK: Routledge, pp. 15–33.

Levidow, Les; Birch, Kean and Papaioannou, Theo (2012). EU agri-innovation policy: two contending visions of the bio-economy. Critical Policy Studies, 6(1) pp. 40–65.

Levidow, Les and Oreszczyn, Sue (2012). Challenging unsustainable development through research cooperation. Local Environment, 17(1) pp. 35–56.

Levidow, Les; Papaioannou, Theo and Birch, Kean (2012). Neoliberalising technoscience and environment: EU policy for competitive, sustainable biofuels. In: Pellizzoni, Luigi and Ylönen, Marja eds. Neoliberalism and Technoscience. Theory, Technology and Society. Farnham: Ashgate, pp. 159–186.

Levidow, Les and Psarikidou, Katerina (2012). Making local food sustainable in Manchester. In: Viljoen, Andre and Wiskerke, Johannes S. C. eds. Sustainable Food Planning: Evolving Theory and Practice. Wageningen: Wageningen Academic Publishers, pp. 207–220.

Lloyd, Peter (2012). Embedded creativity: teaching design thinking via distance education. International Journal of Technology and Design Education (in Press).

Londos, C. A.; Aliprantis, D.; Sgourou, E. N.; Chroneos, A. and Pochet, P. (2012). Formation and evolution of oxygen-vacancy clusters in lead and tin doped silicon. Journal of Applied Physics, 111(12)

Mamou-Mani, Adrien; Placido, Laetitia and Sharp, David (2012). Physical and perceptual differences between two trumpets of the same model type. In: Acoustics 2012, 23-27 April 2012, Nantes, France.

Mamou-Mani, Adrien; Sharp, David; Meurisse, Thibaut and Ring, William (2012). Investigating the consistency of woodwind instrument manufacturing by comparing five nominally identical oboes. Journal of the Acoustical Society of America, 131(1) pp. 728–736.

Manamperi, Aresha and Huzair, Farah (2012). Capacity building in genomics medicine and molecular diagnostics: the case of Sri Lanka. Current Pharmacogenomics and Personalized Medicine , 10(3) pp. 185–194.

Marjanovic, Sonja; Hanlin, Rebecca; Diepeveen, Stephanie and Chataway, Joanna (2012). Research capacity building in Africa: networks, institutions and local ownership. Journal of International Development (Early View).

Meurisse, Thibaut; Mamou-Mani, Adrien; Causse, Rene and Sharp, David (2012). Active control applied to wind instruments. In: Acoustics 2012 , 23-27 April 2012, Nantes, France.

Moat, R. J.; Zhang, S. Y.; Kelleher, J.; Mark, A. F.; Mori, T. and Withers, P. J. (2012). Work hardening induced by martensite during transformation-induced plasticity in plain carbon steel. Acta Materialia (In press).

Moffatt, J. E.; Fitzpatrick, M. E. and Edwards, L. (2012). Effect of frequency on high-temperature fatigue crack growth in a silicon carbide reinforced silicon nitride composite. International Journal of Fatigue, 47 pp. 319–329.

Mohan, Giles (2012). Rising powers. In: Butcher, Melissa and Papaioannou, Theo eds. International Development in a Changing World. London: Bloomsbury Academic, (In press).

Mohan, Giles and Butcher, Melissa (2012). Spaces of development: cities, mobilities and ecologies. In: Papaioannou, Theo and Butcher, Melissa eds. International Development in a Changing World. International Development (1). London: Bloomsbury Academic, (In press).

Monk, John (2012). Creating reality. In: Bissell, Chris and Dillon, Chris eds. Ways of Thinking, Ways of Seeing: Mathematical and Other Modelling in Engineering and Technology. Automation, Collaboration, & E-Services (1). Berlin: Springer, pp. 1–28.

Mugwagwa, Julius (2012). Multiple meanings, one objective: the case of biotechnology policy convergence in Africa. Asian Biotechnology and Development Review, 14(3) pp. 31–48.

Mugwagwa, Julius and Makinde, Diran (2012). Governance of biotechnology in Africa: the challenge of reconciling interdependencies and differences. Asian Biotechnology and Development Review, 14(3) pp. 71–84.

Northover, S. M. and Northover, J. P. (2012). Applications of Electron Backscatter Diffraction (EBSD) in Archaeology. In: Meeks, Nigel; Cartwright, Caroline; Meek, Andrew and Mongiatti, Aude eds. Historical Technology, Materials and Conservation: SEM and Microanalysis. Archetype Publications, pp. 76–85.

Northover, S. M.; Northover, J. P. and Imlach, G. G. (2012). Microstructures of cast silver-copper alloy archaeological artefacts. In: EMC2012 (The 15th European Microscopy Congress), 16-21 September 2012, Manchester, UK.

Novotný, M.; Čížek, J.; Kužel, R.; Bulíř, J.; Lančok, J.; Connolly, J.; McCarthy, E.; Krishnamurthy, Satheesh; Mosnier, J-P.; Anwand, W. and Brauer, G. (2012). Structural characterization of ZnO thin films grown on various substrates by pulsed laser deposition. Journal of Physics D: Applied Physics, 45

Nuttall, William J.; Clarke, Richard H. and Glowacki, Bartek A. (2012). Resources: Stop squandering helium. Nature, 485(7400) pp. 573–575.

Obasi, G.C.; Moat, R.J.; Leo Prakash, D.G.; Kockelmann, W.; Quinta da Fonseca, J. and Preuss, M. (2012). In situ neutron diffraction study of texture evolution and variant selection during the α→β→α phase transformation in Ti–6Al–4V. Acta Materialia, 60(20) pp. 7169–7182.

Oreszczyn, Sue and Lane, Andrew (2012). The role of contexts in knowledge brokering systems. The Open University.

Oreszczyn, Sue and Lane, Andrew (2012). Mapping knowledge exchange in the UK hedgerow management system: a report on a Workshop held at Hedgerow Futures, the first International Hedgelink Conference. The Open University.

Oreszczyn, Sue and Lane, Andy (2012). Agri-environmental knowledge management and networks of practice: a workshop background paper. In: Hedgerow Futures Conference, 3-5 September 2012, Staffiordshire University, Stoke on Trent.

Paddea, S.; Francis, J. A.; Paradowska, A M; Bouchard, P. J. and Shibli, I. A. (2012). Residual Stress Distributions in a P91 Steel-Pipe Girth Weld before and after Post Weld Heat Treatment. Materials Science and Engineering A, 534 pp. 663–672.

Papaioannou, Theo (2012). Reading Hayek in the 21st Century: A Critical Inquiry into His Political Thought. Basingstoke: Palgrave Macmillan.

Papaioannou, Theo (2012). Democratic governance of genomics: the case of UK Biobank. New Genetics and Society, 31(2) pp. 111–133.

Papaioannou, Theo (2012). From consultation to deliberation? a qualitative case study of governing science and technology projects for the public good. Critical Public Health, 22(2) pp. 235–251.

Papaioannou, Theo and Rosiello , Alessandro (2012). Bio-clusters as co-evolutionary developments of technology, venture capital and socio-political institutions: a historical perspective of Cambridge and Scotland. International Journal of Innovation and Regional Development , 4(5) pp. 386–413.

Paradowska, Anna M.; Tremsin, Anton; Kelleher, Joe F.; Zhang, Shu Yen; Paddea, Sanjooram; Burca, Genoveva; James, Jon A.; Ahmed, Rehan; Faisal, Nadimul H.; Grazzi, Francesco; Festa, Giulia; Andreani, Carla; Civita, Francesco; Bouchard, Peter J.; Kockelman, Winfried and Fitzpatrick, Michael E. (2012). Modern and historical engineering concerns investigated by neutron diffraction on ENGIN-X. Journal of Solid Mechanics and Materials Engineering, 6(6) pp. 408–418.

Peake, Stephen (2012). The business of design. In: Garner, Steven and Evans, Chris eds. Design and Designing: A Critical Introduction. London: Berg.

Peake, Stephen (2012). What is a low carbon society? In: Herring, Horace ed. Living in a Low-Carbon Society in 2050. Energy, Climate and the Environment. Palgrave, (In press).

Pierret, S.; Evans, A.; Paradowska, A. M.; Kaestner, A.; James, J.; Etter, T. and Swygenhoven, H. Van (2012). Combining neutron diffraction and imaging for residual strain measurements in a single crystal turbine blade. NDT & E International, 45(1) pp. 39–45.

Potter, Stephen (2012). How to write up research. In: Becker, Saul; Bryman, Alan and Ferguson, Harry eds. Understanding Research for Social Policy and Social Work. Bristol: The Policy Press, pp. 367–372.

Potter, Stephen (2012). Transport and mobility choices in 2050. In: Herring, Horace ed. Living in a Low Carbon Society in 2050. Energy, Climate and Environment. Palgrave Macmillan, pp. 60–74.

Potter, Stephen (2012). Transport and energy use. In: Jean-Paul, Rodrique; Notteboom, Theo and Shaw, Jon eds. The Sage Handbook of Transport Studies. Sage.

Potter, Stephen (2012). Transport interchanges and the integration design challenge. In: Tovey, Michael ed. Design for Transport: A User-Centered Approach to Vehicle Design and Travel. Design for Social Responsibility. Farnham, UK: Gower.

Potter, Stephen (2012). Design and the transport system: transport planning. In: Tovey , Mike ed. Design for Transport: A User-Centered Approach to Vehicle Design and Travel. Design for Social Responsibility. Farnham, UK: Gower.

Potter, Stephen and Atchulo, Abukari (2012). The role of company car taxation to promote low carbon vehicle technologies. In: Universities' Transport Studies Group Annual Conference, 4-6 January 2012, Aberdeen.

Potter, Stephen and Ison, Stephen (2012). Universities' Transport Studies Group UK Annual Conference 2011. Taylor and Francis, London.

Power, Marcus; Mohan, Giles and Tan-Mullins, May (2012). China's Resource Diplomacy in Africa - Powering Development? International Political Economy Series. London: Palgrave McMillan.

Prechtl, Anthony; Milne, Andrew J.; Holland, Simon; Laney, Robin and Sharp, David B. (2012). A MIDI sequencer that widens access to the compositional possibilities of novel tunings. Computer Music Journal, 36(1) pp. 42–54.

Rao, Ashwin; Bouchard, P. John; Northover, Shirley M. and Fitzpatrick, Michael E. (2012). Anelasticity in austenitic stainless steel. Acta Materialia, 60(19) 6851 -6861.

Roberts, Jane and Roberts, Carolyn (2012). Empowering education for sustainable development practitioners by building communities of practice. In: Cotton, Debby; Sterling, Stephen; Neal, Vivian and Winter, Jennie eds. Putting the ‘S’ into ED - Education for Sustainable Development in Educational Development. SEDA special (31). London, UK: SEDA, pp. 17–22.

Roy, Robin (2012). Case studies in low carbon living. In: Herring, Horace ed. Living in a Low Carbon Society. Basingstoke: Palgrave Macmillan, (In press).

Roy, Robin and Tovey, Michael (2012). Bicycle design: creativity and innovation. In: Tovey, Michael ed. Design for transport. Farnham UK: Gower, (In press).

Sakanashi, Y.; Gungor, S. and Bouchard, J. (2012). Measurement of local creep properties in stainless steel welds. In: 4th International Conference on Integrity of High Temperature Welds, 25-27 September 2012, London.

Schmid, Otto; Padel, Susanne and Levidow, Les (2012). The bio-economy concept and knowledge base in a public goods and farmer perspective. Bio-based and Applied Economics (BAE), 1(1) pp. 47–63.

Seymour, I. D.; Tarancón, A.; Chroneos, A.; Parfitt, D.; Kilner, J. A. and Grimes, R. W. (2012). Anisotropic oxygen diffusion in PrBaCo2O5.5 double perovskites. Solid State Ionics, 216 pp. 41–43.

Sharp, David (2012). Mutual benefits of collaborations between instrument makers, musicians and acousticians. In: Acoustics 2012 , 23-27 April 2012, Nantes, France.

Smith, M. C.; Bouchard, P. J.; Turski, M.; Edwards, L. and Dennis, R. J. (2012). Accurate prediction of residual stress in stainless steel welds. Computational Materials Science, 54 pp. 312–328.

Steer, Steven J.; Cardin, Michel-Alexandre; Nuttall, William J.; Parks, Geoffrey T. and Gonçalves, Leonardo V.N. (2012). Minimising the economic cost and risk to accelerator-driven subcritical reactor technology: The case of designing for flexibility: Part 1. Nuclear Engineering and Design, 243 pp. 135–147.

Sutton, Yvonne C.; Johnson, Peter C.; Naidis, George V.; Sharp, David and Braithwaite, Nicholas St. J. (2012). A numerical and experimental investigation of an axially symmetric RF plasma. Journal of Physics D: Applied Physics, 45(45)

Tahera, K.; Earl, C. and Eckert, C. (2012). Integrating physical and virtual testing to improve confidence in product design. In: Workshop on Modelling and Management of Engineering Processes , 29-30 November 2012, Trinity College, University of Cambridge.

Tahera, Khadija; Earl, Christopher and Eckert, Claudia (2012). The role of testing in the engineering product development process. In: Proceedings of TMCE 2012, 7-11 May 2012, Karlsruhe, Germany.

Taherzadeh, Shahram; Bashir, Imran and Attenborough, Keith (2012). Aperiodicity effects on sound transmission through arrays of identical cylinders perpendicular to the ground. Journal of the Acoustical Society of America, 132(4) EL323-EL328.

Tan-Mullins, May and Mohan, Giles (2012). The potential of corporate environmental responsibility of Chinese state-owned enterprises in Africa. Environment, Development and Sustainability (In press).

Urban, Frauke; Mohan, Giles and Cook, Sarah (2012). China as a new shaper of international development: the environmental implications. Environment, Development and Sustainability (In press).

Wang, H.; Chroneos, Alexander; Jiang, C. and Schwingenschlögl , U. (2012). Special quasirandom structures for gadolinia-doped ceria and related materials. Physical Chemistry Chemical Physics, 14(33) pp. 11737–11742.

Whalley, W. R.; Jenkins, M. and Attenborough, K. (2012). The velocity of shear waves in unsaturated soil. Soil and Tillage Research, 125 pp. 30–37.

White, Diana and Fortune, Joyce (2012). Using systems thinking to evaluate a major project: The case of the Gateshead Millennium Bridge. Engineering, Construction and Architectural Management, 19(2) pp. 205–228.

Wilson, Gordon (2012). The lived experience of climate change: expanding the knowledge base through collaborative Master's curriculum in the European Union. International Journal of Innovation and Sustainable Development, 6(1) pp. 43–52.

Zamenopoulos, Theodore and Alexiou, Katerina (2012). Complexity: what designers need to know. In: Garner, Steve and Evans, Chris eds. Design and Designing: a Critical Introduction. Berg.

Zamenopoulos, Theodore and Alexiou, Katerina (2012). A complexity theoretic view of cities as artefacts of design intentionality. In: Portugali , Juval ; Meyer , Han ; Stolk , Egbert and Tan, Ekim eds. Complexity Theories of Cities Have Come of Age: An Overview with Implications to Urban Planning and Design. Berlin: Springer, pp. 327–346.

2011

Robbins, Peter and Huzair, Farah eds. (2011). Exploring Central And Eastern Europe's Biotechnology Landscape. The International Library of Ethics Law and Technology, 9. Dordrecht: Springer.

Voiculescu, Aurora and Yanacopulos, Helen eds. (2011). The Business of Human Rights: An Evolving Agenda for Corporate Responsibility. London, England: Zed Publishers.

Acar, M. O.; Gungor, S.; Fitzpatrick, M. E. and Bouchard, P. J. (2011). Numerical study of strength mismatch in cross-weld tensile testing. In: International Congress on Advances in Welding Science and Technology for Construction, Energy and Transportation Systems (AWST 2011) , 24-25 October 2011, Antalya, Turkey.

Ahmed, R.; Faisal, N. H.; Paradowska, A. M.; Fitzpatrick, M. E. and Khor, K. A. (2011). Neutron diffraction residual strain measurements in nanostructured hydroxyapatite coatings for orthopaedic implants. Journal of the Mechanical Behavior of Biomedical Materials, 4(8) pp. 2043–2054.

Ahsan, M. Naveed; Pinkerton, Andrew J.; Moat, Richard J. and Shackleton, Judith (2011). A comparative study of laser direct metal deposition characteristics using gas and plasma-atomized Ti–6Al–4V powders. Materials Science and Engineering: A, 528(25-26) pp. 7648–7657.

Alexiou, Katerina (2011). Understanding design as a multiagent coordination process: distribution, complexity, and emergence. Environment and Planning B: Planning and Design, 38(2) pp. 248–266.

Alexiou, Katerina; Zamenopoulos, Theodore and Gilbert, Sam (2011). Imaging the designing brain: a neurocognitive exploration of design thinking. In: Gero, John S. ed. Design Computing and Cognition '10. London: Springer, pp. 489–504.

Attallah, M. M.; Terasaki, H.; Moat, R. J.; Bray, S. E.; Komizo, Y. and Preuss, M. (2011). In-situ observation of primary γ′ melting in Ni-base superalloy using confocal laser scanning microscopy. Materials Characterization, 62(8) pp. 760–767.

Attenborough, Keith; Bashir, Imran and Taherzadeh, Shahram (2011). Outdoor ground impedance models. Journal of the Acoustical Society of America, 129(5) pp. 2806–2819.

Attenborough, Keith; Bashir, Imran; Taherzadeh, Shahram and Hill, Toby (2011). Models for acoustical properties of green roof materials. In: Forum Acusticum 2011, 26 June-01 July 2011, Aalborg, Denmark.

Aygun, Haydar; Attenborough, Keith; Lauriks, Walter; Rubini, Philip A. and Langton, Christian M. (2011). Wave propagation in stereo-lithographical (STL) bone replicas at oblique incidence. Applied Acoustics, 72(7) pp. 458–463.

Bacon, D. H.; Edwards, L.; Moffatt, J. E. and Fitzpatrick, M. E. (2011). Synchrotron X-ray diffraction measurements of internal stresses during loading of steel-based metal matrix composites reinforced with TiB2 particles. Acta Materialia, 59(9) pp. 3373–3383.

Bate, Steve and Bouchard, P. John (2011). The Validation of Weld Residual Stresses for use in Structural Integrity Assessment. Applied Mechanics and Materials, 70 pp. 297–302.

Birkett, Stacey; Lloyd, Peter and Garner, Steve (2011). Education to practice: the development of responsibility in product designers. Journal of Design Research, 9(2) pp. 131–145.

Boin, M.; Hilger, A.; Kardjilov, N.; Szang, S. Y.; Oliver, E. C.; James, J. A.; Randau, C. and Wimpory, R. C. (2011). Validation of Bragg edge experiments by Monte Carlo simulations for quantitative texture analysis. Journal of Applied Crystallography , 44(5) pp. 1040–1046.

Borda-Rodriguez, Alexander (2011). Knowledge in development aid and healthcare: a comparative analysis. Innovation Knowledge Development.

Borda-Rodriguez, Alexander and Huzair, Farah (2011). Revisiting the Paris Declaration: pharmacogenomics and personalized medicine as accelerators for development aid and effectiveness. Current Pharmacogenomics and Personalized Medicine, 9(4) pp. 240–242.

Borda-Rodriguez, Alexander and Lanfranco, Sam (2011). Knowledge and technology for development. In: Veltmeyer, Henry ed. The Critical Development Studies Handbook: Tools for Change. Black Point, Nova Scotia: Fernwood Publishing.

Burca, G.; James, J. A.; Kockelmann, W.; Fitzpatrick, M. E.; Zhang, S.Y.; Hovind, J. and van Langh, R. (2011). A new bridge technique for neutron tomography and diffraction measurements. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 651(1) pp. 229–235.

Burnley, S. J.; Phillips, R. and Coleman, T. (2011). A life cycle assessment of recovering energy from the organic fractions of municipal waste. In: Thirteenth International Waste Management and Landfill Symposium, 3-7 October 2011, S. Margherita di Pula (Cagliari), Sardinia.

Burnley, Stephen; Phillips, Rhiannon; Coleman, Terry and Rampling, Terence (2011). Energy implications of the thermal recovery of biodegradable municipal waste materials in the United Kingdom. Waste Management, 31(9-10) pp. 1949–1959.

Chroneos, A.; Londos, C. A. and Sgourou, E. N. (2011). Effect of tin doping on oxygen- and carbon-related defects in Czochralski silicon. Journal of Applied Physics, 110(9)

Chroneos, A.; Londos, C. A.; Sgourou, E. N. and Pochet, P. (2011). Point defect engineering strategies to suppress A-center formation in silicon. Applied Physics Letters, 99(24) p. 241901.

Chroneos, Alexander (2011). Effect of carbon on dopant-vacancy pair stability in germanium. Semiconductor Science and Technology , 26(9) 095017.

Chroneos, Alexander; Londos, C. A. and Bracht, H. (2011). A-centers and isovalent impurities in germanium: density functional theory calculations. Materials Science and Engineering B, 176(5) pp. 453–457.

Chroneos, Alexander; Yildiz, Bilge; Tarancon, Albert; Parfitt, David and Kilner, John A. (2011). Oxygen diffusion in solid oxide fuel cell cathode and electrolyte materials: mechanistic insights from atomistic simulations. Energy & Environmental Science, 4(8) pp. 2774–2789.

Connolly, Jack; Jain, Anand; Pastorella, Gabriele; Krishnamurthy, Satheesh; Mosnier, Jean-Paul and Marsili, Enrico (2011). Zinc oxide and indium tin oxide thin films for the growth and characterization of Shewanella loihica PV-4 electroactive biofilms. Virulence, 2(5) pp. 479–482.

Dewberry, Emma (2011). Developing an ecology of mind in design. In: 18th International Conference on Engineering Design (ICED 11), 15-18 August 2011, Copenhagen, Denmark.

Dolan, T.; Cook, M. B. and Angus, A. J. (2011). Financial appraisal of wet mesophilic AD technology as a renewable energy and waste management technology. Science of the Total Environment, 409(13) pp. 2460–2466.

Eckert, Claudia and Schadewitz, Nicole (2011). Disziplinen der Produktentwicklung aus der Perspektive des angelsächsischen Raums. In: Banse, Gerhard and Fleischer, Lutz-Günther eds. Wissenschaft im Kontext. Inter- und Transdisziplinarität in Theorie und Praxis. Abhandlungen der Leibniz-Sozietät der Wissenschaften, Bd. 27 (27). Berlin: trafo wissenschaft verlag.

Eckert, C. M.; Keller, R. and Clarkson, P. J. (2011). Change prediction in innovative products to avoid emergency innovation. International Journal of Technology Management, 55(3/4) pp. 226–237.

Eckert, Claudia; Alink, Thomas; Ruckpaul, Anne and Albers, Albert (2011). Different notions of function: results from an experiment on the analysis of an existing product. Journal of Engineering Design, 22(11-12) pp. 811–837.

Fortune, Joyce; White, Diana; Jugdev, Kam and Walker, Derek (2011). Looking again at current practice in project management. International Journal of Managing Projects in Business, 4(4) pp. 553–572.

Fu, Xiaolan; Kaplinsky, Raphie and Kale, Dina (2011). Global manufactures prices: how do China’s exports compare? In: Fu, Xiaolan ed. China’s Role in Global Economic Recovery. Routledge Studies on the Chinese Economy. Abingdon, UK: Routledge, pp. 127–145.

Gagg, Colin and Clegg, Richard (2011). The Fourth International Conference on Engineering Failure Analysis. Engineering Failure Analysis 18 (2).

Gagg, Colin and Lewis, Peter (2011). The rise and fall of cast iron in Victorian structures – a case study review. Engineering Failure Analysis (In press).

Hanan, D. B.; Burnley, S. J. and Cooke, D. F. (2011). The use of multicriteria decision analysis (MCDA) to determine community views on municipal waste management proposals. In: Thirteenth International Waste Management and Landfill Symposium, 3-7 October 2011, S. Margherita di Pula (Cagliari), Sardinia, Italy.

Hanlin, Rebecca (2011). Evaluating product development partnerships: beyond quantitative metrics. In: Williams, Owain David and Rushton, Simon eds. Partnerships and Foundations in Global Health Governance. International Political Economy Series. Basingstoke: Palgrave Macmillan, pp. 102–120.

Hanlon, Joseph (2011). Mozambique: can Frelimo remain the predominant party? African Arguments.

Hanlon, Joseph (2011). Is Mozambique following a latecomer developer strategy? Transformation, 2011(76) pp. 137–143.

Hanlon, Joseph (2011). Mozambique. In: Mehler, Andreas; Melber, Henning and van Walraven, Klaas eds. Africa Yearbook : Politics, Economy and Society South of the Sahara 2010. Africa Yearbook (7). Leiden: Brill.

Hanlon, Joseph (2011). Välfärdssamhället Sverige som förebild – möjligheter och lärdomar. In: Nycander, Gunnel Axelsson ed. Pengar i Handen: Sociala Trygghetssystem som Metod för Att Bekämpa Fattigdom och Hunger. Uppsala: Nordiska Afrikainstitutet, pp. 49–61.

Herring, Horace (2011). Dealing with Rebound Effects. In: ECEEE Summer Study, 6–11 June 2011, Belambra Presqu'île de Giens, France (forthcoming).

Hetherington, Robina; Laney, Robin and Peake, Stephen (2011). A software vision to enable the holistic design of low carbon buildings. In: 3rd International Workshop on Software Research and Climate Change at European Conference on Object-Oriented Programming (ECOOP) 2011, 25 July 2011, Lancaster, UK.

Hetherington, Robina; Laney, Robin; Peake, Stephen and Oldham, David (2011). Integrated building design, information and simulation modelling: the need for a new hierarchy. In: Building Simulation 2011, 14-16 November 2011, Sydney, Australia.

Hill, Toby; Taherzadeh, Shahram; Bashir, Imran and Attenborough, Keith (2011). Effects of source side roughness on the acoustical performance of a traffic noise berm. In: Forum Acusticum 2011, 26 June-01 July 2011, Aalborg, Denmark.

Hodgson, Paul; Potter, Stephen; Warren, James and Gillingwater, David (2011). Can bus really be the new tram? In: Thredbo 12: The 12th International Conference on Competition and Ownership in Land Passenger Transport, 11-15 September 2011, Durban, South Africa.

Hosseinzadeh, F.; Mahmoudi, A. H.; Truman, C. E. and Smith, D. J. (2011). Application of deep hole drilling to the measurement and analysis of residual stresses in steel shrink fitted assemblies. Strain, 47(S2) pp. 412–426.

Hosseinzadeh , Foroogh and Bouchard, Peter (2011). Application of the contour method to validate residual stress predictions. In: Second International Conference on Advances in Nuclear Materials (ANM-2011), 09-11 Feb 2011, Mumbai, India.

Huzair, Farah (2011). Coping strategies and system adaptation of agricultural biotechnology research in Hungary. In: Robbins, Peter T. and Huzair, Farah eds. Exploring Central and Eastern Europe's Biotechnology Landscape. The International Library of Ethics, Law and Technology (9). Dordrecht: Springer, pp. 157–176.

Huzair, Farah; Borda-Rodriguez, Alexander and Upton, Mary (2011). Twenty-first century vaccinomics innovation systems: capacity building in the global South and the role of Product Development Partnerships (PDPs). OMICS: A Journal of Integrative Biology, 15(9) pp. 539–543.

Huzair, Farah and Kale, Dinar (2011). Emergence of the Biosimilar Sector and Opportunities of Developing Country Suppliers. Innogen.

Huzair, Farah and Robbins, Peter (2011). Human life science and agricultural biotechnology in transition: an introduction. In: Robbins, Peter and Huzair, Farah eds. Exploring Central and Eastern Europe's Biotechnology Landscape. The International Library of Ethics, Law and Technology, 9. Dordrecht: Springer, pp. 1–11.

Impellizzeri, G.; Boninelli, S.; Priolo, F.; Napolitani, E.; Spinella, C.; Chroneos, A. and Bracht, H. (2011). Fluorine effect on As diffusion in Ge. Journal of Applied Physics, 109(11)

Iqbal, N.; Rolph, J.; Moat, R.; Hughes, D.; Hofmann, M.; Kelleher, J.; Baxter, G.; Withers, P. J. and Preuss, M. (2011). A comparison of residual stress development in inertia friction welded fine grain and coarse grain nickel-base superalloy. Metallurgical and Materials Transactions A, 42(13) pp. 4056–4063.

Irving, P. E.; Zhang, X.; Doucet, J.; Figueroa-Gordon, D.; Boscolo, M.; Heinimann, M.; Shepherd, G.; Fitzpatrick, M. E. and Liljedahl, D. (2011). Life extension techniques for aircraft structures – extending durability and promoting damage tolerance through bonded crack retarders. In: ICAF 2011 Structural Integrity: Influence of Efficiency and Green Imperatives Proceedings of the 26th Symposium of the International Committee on Aeronautical Fatigue, 1-3 June 2011, Montreal, Canada.

Jarrett, T. A. W.; Eckert, C. M.; Caldwell, N. H. M. and Clarkson, P. J. (2011). Engineering change: an overview and perspective on the literature. Research in Engineering Design, 22(2) pp. 103–124.

Johnson, Hazel; Pinder, Richard and Wilson, Gordon (2011). Beyond means and ends: learning, engagement and towards an emancipatory development management. In: EADI-DSA 2011 Conference (13th EADI General Conference): Rethinking Development in an Age of Scarcity and Uncertainty: New Values, Voices and Alliances for Increased Resilience, 19-22 September 2011, York, UK.

Johnson, P. C.; Sutton, Y.; Sharp, D.; Moore, J. and Braithwaite, N. St. J (2011). Characteristics of a transition discharge in air through N2 spectroscopy. In: TPW 8th Technological Plasma Workshop , 6-7 January 2011, Bristol.

Jones, Derek (2011). An alternative (to) reality. In: Proceedings of the Researching Learning in Immersive Virtual Environments Conference, 21-22 September 2011, The Open University, Milton Keynes.

Jowers, Iestyn and Earl, Christopher (2011). The implementation of curved shape grammars. Environment and Planning B: Planning and Design, 38(4) pp. 616–635.

Jowers, Iestyn; Prats, Miquel; McKay, Alison and Garner, Steven (2011). Design exploration with useless rules and eye tracking. In: 18th International Conference on Engineering Design (ICED11), 15-18 August 2011, Copenhagen, Denmark.

Jowers, Iestyn; Prats, Miquel; Pedreira, Nieves; McKay, Alison and Garner, Steven (2011). Supporting shape reinterpretation with eye tracking. In: 'Circuit bending, breaking and mending', the 16th conference of Computer Aided Architectural Design Research in Asia (CAADRIA), 27-30 April 2011, Newcastle, Australia.

Kale, Dinar (2011). Cross-roads for pharma in India. pharmaforum.

Kale, Dinar (2011). The changing role of key stakeholders in pharmaceutical value chain. Pharmaforum.

Kale, Dinar (2011). In search of missing hand of 'state': the case of the Indian medical device industry. In: The 9th GLOBELICS (Global Network for the Economics of Learning, Innovation, and Competence Building Systems) International Conference: Creativity, innovation and Economic Development, 15-17 November 2011, Buenos Aires, Argentina.

Kale, Dinar (2011). Co-evolution of policies and firm level technological capabilities in the Indian automobile industry. In: Atlanta Conference on Science and Innovation Policy, 2011, 13 - 17 September, 2011, Atlanta, GA, USA.

Kale, Dinar; Little, Stephen and Hinton, Matt (2011). Reconfiguration of knowledge management practices in new product development- The case of the Indian pharmaceutical industry. In: Grant, Kenneth A. ed. Case Studies in Knowledge Management Research. Reading, UK: Academic Publishing International Ltd, pp. 102–119.

Kankanala, Anusha; James, Jon; Bouchard, John; Northover, Shirley and Yescas, Miguel (2011). Measurement of residual stresses in a dissimilar metal welded pipe. In: MECA SENS VI, 7 -9 September 2011, Hamburg, Germany.

Kaplinsky, Raphael (2011). Schumacher meets Schumpeter: Appropriate technology below the radar. Research Policy, 40(2) pp. 193–203.

Kaplinsky, Raphael (2011). Innovation for pro-poor growth: from redistribution with growth to redistribution through growth. In: Conference in Honour of Sir Richard Jolly - “From structural adjustment to human development: impact on poverty and inequality”, 17-18 November 2011, Brighton.

Kaplinsky, Raphael (2011). What Contribution can China Make to Inclusive Growth in SSA? In: China Rising Conference, 5 - 6 December 2011, University of Bristol.

Kaplinsky, Raphael and Farooki, Masuma (2011). How China Disrupted Global Commodities: The Reshaping of the World’s Resource Sector. Routledge studies in global competition. London: Routledge.

Kaplinsky, Raphael and Farooki, Masuma (2011). What are the implications for global value chains when the market shifts from the north to the south? International Journal of Technological Learning, Innovation and Development, Vol. 4(1/2/3) pp. 13–38.

Kaplinsky, Raphael; Morris, Adam and Kaplan, David (2011). Commodities and Linkages: Industrialisation in Sub-Saharan Africa. The Open University.

Kaplinsky, Raphael; Morris, Adam and Kaplan, David (2011). Commodities and Linkages: Meeting the Policy Challenge. The Open University.

Kaplinsky, Raphael; Morris, Mike and Kaplan, Dave (2011). A Conceptual Overview to Understand Commodities, Linkages and Industrial Development in Africa. Africa Export Import Bank.

Kerley, Warren; Wynn, David C.; Eckert, Claudia and Clarkson, John (2011). Redesigning the design process through interactive simulation: a case study of life-cycle engineering in jet engine conceptual design. International Journal of Services and Operations Management (IJSOM), 10(1) pp. 30–51.

Kesten, Jamie; Cochrane, Allan; Mohan, Giles and Neal, Sarah (2011). Multiculture and community in new city spaces. Journal of Intercultural Studies, 32(2) pp. 133–150.

Khan, M. K.; Fitzpatrick, M. E.; Hainsworth, S. V.; Evans, A. D. and Edwards, L. (2011). Application of synchrotron X-ray diffraction and nanoindentation for the determination of residual stress fields around scratches. Acta Materialia, 59(20) pp. 7508–7520.

Kreitmayer, Stefan; Peake, Stephen; Laney, Robin and Rogers, Yvonne (2011). Designing a large multi-player simulation game to encourage critical debate. In: 5th European Conference on Games Based Learning, 20-21 October 2011, Athens, Greece.

Krishnamurthy, Satheesh; Kennedy, Brian; Mcgee, Fintan; Venkatesan, M.; Coey, J. M. D.; Lunney, James G.; Learmonth, Timothy; Smith, Kevin E.; Schmitt, Thorsten and McGuinness, Cormac (2011). Resonant soft X-ray emission and X-ray absorption studies on Ga1-xMnxN grown by pulsed laser deposition. Physica Status Solidi (C) Current Topics in Solid State Physics, 8(5) pp. 1608–1610.

Krynkin, Anton; Umnova, Olga; Chong, Alvin Y. B.; Taherzadeh, Shahram and Attenborough, Keith (2011). Scattering by coupled resonating elements in air. Journal of Physics D: Applied Physics, 44 pp. 125501–125513.

Krynkin, Anton; Umnova, Olga; Sánchez-Pérez, Juan; Chong, Yung; Taherzadeh, Shahram and Attenborough, Keith (2011). Acoustic insertion loss due to two dimensional periodic arrays of circular cylinders parallel to a nearby surface. Journal of the Acoustical Society of America, 130(6) pp. 3736–3745.

Kushima, Akihiro; Parfitt, David; Chroneos, Alexander; Yildiz, Bilge; Kilner, John A. and Grimes, Robin W. (2011). Interstitialcy diffusion of oxygen in tetragonal La2CoO4+δ. Physical Chemistry Chemical Physics, 13(6) pp. 2242–2249.

Lemon, Mark; Craig, John and Cook, Matthew (2011). Looking in or looking out? top-down change and operational capability. Historical Social Research, 36(1) pp. 143–159.

Levidow, Les and Boschert, Karin (2011). Segregating GM crops: why a contentious 'risk' issue in Europe? Science as Culture, 20(2) pp. 255–279.

Levidow, Les and Paul, Helena (2011). Global agrofuel crops as contested sustainability, Part II: Eco-efficient techno-fixes? Capitalism Nature Socialism, 22(2) pp. 27–51.

Levidow, Les and Psarikidou, Katerina (2011). Food relocalization for environmental sustainability in Cumbria. Sustainability, 3(4) pp. 692–719.

Liljedahl, C. D. M.; Fitzpatrick, M. E.; Zanellato, O. and Edwards, L. (2011). Effect of temperature on the residual stresses in an integral structure with a crack-retarding patch. Strain, 47(S2) pp. 293–298.

Lloyd, Peter (2011). Bypassing ethics via design: ethical discourses in the road design process. In: 4th World Conference on Design Research (IASDR2011), 31 Oct - 4 Nov 2011, Delft, The Netherlands.

Lloyd, Peter (2011). Does design education always produce designers? In: Researching Design Education: 1st International Symposium for Design Education Researchers, May 18-19, 2011, Paris, France.

Londos, C. A.; Sgourou, E. N.; Chroneos, A. and Emtsev, V. V. (2011). Carbon, oxygen and intrinsic defect interactions in germanium-doped silicon. Semiconductor Science and Technology , 26(10) p. 105024.

Martin, James Keith (2011). Improved performance of hydrodynamic bearings by proactive adjustment. Mécanique & Industries, 12(1) pp. 17–24.

Martin, Keith and Parkins, David (2011). Notes on a simplified two-degree-of-freedom car suspension model of chassis heave and pitch-plane dynamics. Proc. IMechE Part K: Journal of Multi-body Dynamics, 225(3) pp. 252–262.

Masko, Mary Lou; Eckert, Claudia M.; Caldwell, Nicholas H. M. and Clarkson, P. John (2011). Designing for resilience: using a Delpi Study to indentify resilience issues for hospital design in a changing climate. In: 18th International conference on engineering design (ICED 11), 15-18 Aug 2011, Copenhagen, Demark.

Mathew, Anijo; Rogers, Yvonne and Lloyd, Peter (2011). Post-it note art: evaluating public creativity at a user generated art installation. In: 2011 ACM , 3-6 November 2011, Atlanta, Georgia, USA (forthcoming).

Meixner, M.; Fitzpatrick, M. E and Reimers, W. (2011). Measurement of the evolution of internal strain and load partitioning in magnesium hybrid composites under compression load using in-situ synchrotron X-ray diffraction analysis. Composites Science and Technology, 71(2) pp. 167–176.

Milne, Andrew J.; Sethares, William A.; Laney, Robin and Sharp, David B. (2011). Modelling the similarity of pitch collections with expectation tensors. Journal of Mathematics and Music: Mathematical and Comptational Approaches to Music Theory, Analysis, Composition and Performance, 5(1) pp. 1–20.

Milne, Andrew J.; Xambó, Anna; Laney, Robin; Sharp, David B.; Prechtl, Anthony and Holland, Simon (2011). Hex Player—a virtual musical controller. In: The International Conference on New Interfaces for Musical Expression 2011, 30 May – 01 June 2011, Oslo, Norway.

Mittra, James; Tait, Joyce and Wield, David (2011). From maturity to value-added innovation: lessons from the pharmaceutical and agro-biotechnology industries. Trends in Biotechnology, 29(3) pp. 105–109.

Mittra, James; Tait, Joyce and Wield, David (2011). The future of pharmaceutical innovation: new challenges and opportunities. IPTonline(36) pp. 32–34.

Mjimba, Vuyo (2011). Dug too deep: untangling the policy terrain of the minerals commodity sector in Tanzania. In: Rethinking Development in an Age of Scarcity and Uncertainty, 19-22 September 2011, York.

Moat, R. J.; Karadge, M.; Preuss, M.; Bray, S. E. and Rawson, M. (2011). Detailed diffraction and electron microscopy study of inertia-friction-welded dissimilar high-strength steels. Metallurgical and Materials Transactions A, 42(10) pp. 3130–3140.

Moat, R. J.; Pinkerton, A.J.; Li, L.; Withers, P. J. and Preuss, M. (2011). Residual stresses in laser direct metal deposited Waspaloy. Materials Science and Engineering: A, 528(6) pp. 2288–2298.

Moat, R. J.; Stone, H. J.; Shirzadi, A. A.; Francis, J. A.; Kundu, S.; Mark, A. F.; Bhadeshia, H. K. D. H.; Karlsson, L. and Withers, P. J. (2011). Design of weld fillers for mitigation of residual stresses in ferritic and austenitic steel welds. Science and Technology of Welding & Joining, 16(3) pp. 279–284.

Moat, R. J.; Stone, H. J.; Shirzadi, A. A.; Francis, J. A.; Kundu, S.; Mark, A. F.; Bhadeshia, H. K. D. H.; Karlsson, L. and Withers, P. J. (2011). Design of weld fillers for mitigation of residual stresses in ferritic and austenitic steel welds. Science and Technology of Welding & Joining, 16(3) pp. 279–284.

Monk, John (2011). Bodies, machines and politics. In: Hughes, Rolf and Sundén, Jenny eds. Second Nature: Origins and Originality in Art, Science, and New Media. Stockholm: Axl Books, pp. 29–58.

Monk, John (2011). Signs and signals. In: Ramage, Magnus and Chapman, David eds. Perspectives on Information. Routledge Studies in Library and Information Science. Abingdon, UK and New York, USA: Routledge, pp. 51–64.

Moore, D.; Krishnamurthy, S.; Chao, Y.; Wang, Q.; Brabazon, D. and McNally, P. J. (2011). Characteristics of silicon nanocrystals for photovoltaic applications. Physica Status Solidi (A) Applications and Materials Science, 208(3) pp. 604–607.

Morlock, A.; Sutton, Y. C.; Braithwaite, N. St.J. and Grady, M. M. (2011). Even more chondrules born in plasma: simulation of gas-grain collisions. In: 42nd Lunar and Planetary Science Conference, 7-11 March 2011, Houston, TX, USA.

Morlock, A.; Sutton, Y. C.; Patel, M.; Braithwaite, N. St. J and Grady, M. M. (2011). Simulation of gas-grain collisions: a mechanism for chondrule formation. In: 74th Annual Meeting of the Meteoritical Society, 8-12 August 2011, London, UK.

Morlock, A.; Sutton, Y. C.; Patel, M.; Braithwaite, N. St. J. and Grady, M. M. (2011). Simulation of gas-grain collisions: a mechanism for chrondrule formation. In: 74th Annual Meeting of the Meteoritical Society, 8-12 August 2011, London, UK.

Morris, Mike; Kaplinsky, Raphael and Kaplan, David (2011). One thing leads to another � commodities, linkages and industrial development: a conceptual overview. OU.

Mugwagwa, Julius (2011). To harmonise or not to harmonise? The case of cross-national biotechnology governance in Southern Africa. International Journal of Technology Management and Innovation, 6(3) pp. 31–47.

Murphy, S. T.; Chroneos, A.; Grimes, R. W.; Jiang, C. and Schwingenschlögl, U. (2011). Phase stability and the arsenic vacancy defect in InxGa1-xAs. Physical Review B, 84(18) p. 184108.

Nadri, B.; Bouchard, P. J.; Smith, M.; Truman, C. E. and Smith, D. J. (2011). Modelling and statistical treatment of residual stress distributions in an edge welded stainless steel beam. Strain, 47(6) pp. 505–517.

Ngueng-Feze, Ida; Borda-Rodriguez, Alexander and Huzair, Farah (2011). Not so simple: situating postgenomics personalized medicine in the regional context in Africa for global and women's health. Current Pharmacogenomics and Personalized Medicine , 9(4) pp. 332–334.

Nichols, Andrew; Attenborough, Keith and Taherzadeh, Shahram (2011). Deduction of static surface roughness from complex excess attenuation. Journal of the Acoustical Society of America, 129(3) EL89-EL93.

Nilsson, Birgitta; Peterson, Barbro; Holden, Georgina and Eckert, Claudia (2011). Design Med Omtanke: participation and sustainability in the design of public sector buildings. Design Studies, 32(3) pp. 235–254.

Northover, P. J.; Northover, S. M. and Wilcox, N. J (2011). Copper for the navy. In: Cultural Heritage meets Science: The Interface, 14 Sep 2011, Portsnouth, UK.

Northover, Shirley and Northover, J.Peter (2011). Applications of electron backscatter diffraction in archaeology. In: EBSD 2011 - 20th Annual Meeting, 28–30 March 2011, Dusseldorf, Germany.

Nuttall, William J.; Holweg, Matthias and Leybovich, Michael E. (2011). Too big to fail — lessons for today and the future from British industrial policy, 1960–1990. Technological Forecasting and Social Change, 78(8) pp. 1286–1298.

Obasi, G. C.; Moat, R. J.; Prakash, D. G. Leo; Kockelmann, W.; Quinta da Fonseca, J. and Preuss, M. (2011). In Situ observation on the influence of ß grain growth on texture evolution during phase transformation in Ti-6A-4V. Materials Science Forum, 702/3 pp. 854–857.

Oreszczyn, Sue; Levidow, Les and Hinchliffe, Stephen (2011). Cooperative research processes in CREPE (Cooperative research on Environmental Problems in Europe). The Open University, UK.

Papaioannou, Theo (2011). Public-private collaboration for new life sciences innovation and regional development: the cases of Cambridge and Scotland. European Planning Studies, 19(3) pp. 403–428.

Papaioannou, Theo (2011). New Life Sciences Innovation and Distributive Justice: A Senian Perspective. In: 61st Political Studies Association Annual Conference, Transforming Politics: New Synergies, 19 - 21 April 2011, London, U.K..

Papaioannou, Theo (2011). Technological innovation, global justice and politics of development. Progress in Development Studies, 11(4) pp. 321–338.

Paradowska, A. M.; Baczmańsk, A.; Zhang, S. Y.; Rao, A.; Bouchard, P. J. and Kelleher, J. (2011). In-situ Neutron Diffraction Studies of Various Metals on Engin-X at ISIS. In: Proc. 161st Annual ISIJ Meeting (161 ISIJ), 25-27 Mar 2011, Tokyo, Japan.

Parfitt, David; Chroneos, Alexander; Tarancón, Albert and Kilner, John A. (2011). Oxygen ion diffusion in cation ordered/disordered GdBaCo2O5+δ. Journal of Materials Chemistry, 21(7) pp. 2183–2186.

Paterson, Gareth and Earl, Chris (2011). Line and plane to solid: analyzing their use in design practice through shape rules. In: International Conference on Design Computing and Cognition, 10-14 July 2010, Stuttgart.

Peter, Andreas; Schadewitz, Nicole and Lloyd, Peter (2011). Talk around things: prototyping and discussion in the design process. In: 4th World Conference on Design Research (IASDR2011), 31 Oct - 4 Nov 2011, Delft, The Netherlands.

Placido, Laetitia; Mamou-Mani, Adrien and Sharp, David (2011). Investigating perceptual differences between two trumpets of the same model type. Applied Acoustics, 72(12) pp. 907–914.

Potter, Stephen; Roby, Helen; Cook, Matthew and Langendahl, Per-Anders (2011). Transport and environmental innovation. In: Sustainable Innovation 11 'State of the Art in Sustainable Innovation and Design', 24 - 25 October 2011, Farnham, Surrey.

Preuss, M.; Frankel , P.; Lozano-Perez, S.; Hudson, D.; Polatidis, E.; Ni, N.; Wei, J.; English, C.; Storer, S.; Chong, K. B.; Fitzpatrick, M. E.; Wang, P.; Smith, J.; Grovenor, C.; Smith, G.; Sykes, J.; Cottis, B.; Lyon, S.; Hallstadius, L.; Comstock, B.; Ambard, A. and Blat-Yrieix, M. (2011). Studies regarding corrosion mechanisms in zirconium alloys. Journal of ASTM International, 8(9)

Pulikkotil, J. J.; Chroneos, A. and Schwingenschlögl, U. (2011). Structure of Sn1-xGex random alloys as obtained from the coherent potential approximation. Journal of Applied Physics, 110(3)

Rahman, Rameez; Vinkó , Tamás; Hales, David; Pouwelse, Johan and Sips, Henk (2011). Design space analysis for modeling incentives in distributed systems. In: SIGCOMM’11, 15–19 August 2011, Toronto, Ontario, Canada.

Rao, Ashwin; Chong, Kok; Bouchard, Peter and Fitzpatrick, M. E. (2011). Internal stress generation in austentic stainless steels during creep deformation. In: 2011 ASME Pressure Vessels and Piping Conference, 17-21 July 2011, Baltimore, MD, USA.

Robbins, Peter and Huzair, Farah (2011). Final remarks. In: Robbins, Peter and Huzair, Farah eds. Exploring Central and Eastern Europe's Biotechnology Landscape. The International Library of Ethics, Law and Technology, 9. Dordrecht: Springer, pp. 201–220.

Roberts, Jane (2011). Environmental Policy (2nd ed.). Routledge Introductions to Environment Series. Abingdon: Routledge.

Roberts, Jane (2011). A Master’s course in sustainable development advocacy: integrating the Brundtland, Stern and Leitch agendas. Learning and Teaching in Higher Education (LATHE), 5 pp. 159–162.

Roberts, Jane (2011). Video diaries: a tool to investigate sustainability-related learning in threshold spaces. Environmental Education Research, 17(5) pp. 675–688.

Sakanashi, Y.; Gungor, S. and Bouchard, P. J. (2011). Measurement of Creep Deformation in Stainless Steel Welded Joints. In: Proceedings of the 2011 Annual Conference on Experimental and Applied Mechanics; Volume 5 Optical Measurements, Modeling, and Metrology, 11-16 June 2011, Uncasville, CT, USA.

Schwingenschlögl, U.; Chroneos, A.; Schuster, C. and Grimes, R. W. (2011). Doping and cluster formation in diamond. Journal of Applied Physics, 110(5)

Seymour, I. D.; Chroneos, A.; Kilner, J. A. and Grimes, R. W. (2011). Defect processes in orthorhombic LnBaCo2O5.5 double perovskites. Physical Chemistry Chemical Physics, 13(33) pp. 15305–15310.

Sharp, David; Mamou-Mani, Adrien and van Walstijn, Maarten (2011). A single microphone capillary-based system for measuring the complex input impedance of musical wind instruments. Acta Acustica united with Acustica, 97(5) pp. 819–829.

Sheehy, Kieron and Green, Ashley A. (2011). Beaming children where they cannot go: telepresence robots and inclusive education: an exploratory study. Ubiquitous Learning: an international journal, 3(1) pp. 135–146.

Shirzadi, A. A.; Abreu, H.; Cayron, C. and Ubhi, S. (2011). Combined effect of stress and strain on crystallographic orientation of bainite. Ironmaking & Steelmaking, 38(7) pp. 519–524.

Steer, Steven J.; Nuttall, William J.; Parks, Geoffrey T. and Gonçalves, Leonardo V.N. (2011). Predicting the contractual cost of unplanned shutdowns of power stations: an accelerator-driven subcritical reactor case study. Electric Power Systems Research, 81(8) pp. 1662–1671.

Sutton, Yvonne; Moore, John; Sharp, David and Braithwaite, Nicholas St.J (2011). Looking into a plasma loudspeaker. IEEE Transactions on Plasma Science, 39(11) pp. 2146–2147.

Tahini, H.; Chroneos, A.; Grimes, R. W. and Schwingenschlögl, U. (2011). Diffusion of tin in germanium: a GGA+U approach. Applied Physics Letters, 99(16) p. 162103.

Tahini, H.; Chroneos, A.; Grimes, R. W.; Schwingenschlögl, U. and Bracht, H. (2011). Diffusion of E centers in germanium predicted using GGA+U approach. Applied Physics Letters, 99(7) 072112.

Taraborelli , Dario ; Mietchen , Daniel ; Alevizou , Panagiota and Gill, Alastair (2011). Expert participation on Wikipedia: barriers and opportunities. In: Wikimania 2011, 4-6 August 2011, Haifa, Israel.

Teixeira, António Moreira; Nicolau, Paula Bacelar; Caeiro, Sandra ; Dams, Lieve ; van Dorp, Kees Jan and Wilson, Gordon (2011). The lived experience of sustainable learning: the LECH-e OER Project bridging formal and non formal lifelong learners. In: EDEN Annual Conference: Learning and Sustainability: The New Ecosystem of Innovation and Knowledge, 19-22 June 2011, Dublin, Ireland.

Tiberghien, J. E.; Robbins, P. T. and Tyrrel, S. F. (2011). Reflexive assessment of practical and holistic sanitation development tools using the rural and peri-urban case of Mexico. Journal of Environmental Management, 92(3) pp. 457–471.

Toparli, M. Burak and Fitzpatrick, Michael E. (2011). Residual stresses induced by laser peening of thin aluminium plates. Materials Science Forum, 681 pp. 504–509.

Traore, Yeli; Bouchard, Peter; Francis, John and Hosseinzadeh, Foroogh (2011). A novel cutting strategy for reducing plasticity induced errors in residual stress measurements made with the contour method. In: ASME Pressure Vessels and Piping Conference 2011, 17-21 July 2011, Baltimore, USA.

Upton, Mary (2011). The Politics of Health: Community Engagement in South African HIV Vaccine Trial Sites. PhD thesis The Open University.

Upton, Mary (2011). Transnational Advocacy Networks: the changing role of faith-based organisations in HIV and AIDS policy and practice. In: Sexuality, AIDS and Religion: Transnational Dynamics in Africa, 28-30 September 2011, Oxford University.

Upton, Mary (2011). Rethinking global health governance: South African biotechnology initiatives and civil society networks building resilience against AIDS epidemics. In: EADI-DSA 2011 Conference, 19-22 September 2011, University of York, UK.

Upton, Mary E (2011). Communities developing capabilities for health governance: evidence from two South African HIV vaccine clinical trial sites. In: The Human Development Capability Association Annual Conference , 6th-8th September 2011, 3TU Institute of Technology, The Hague, Netherlands. .

van Langh, Robert; James, Jon James; Burca, Genoveva; Kockelmann, Winfried; Zhang, Shu Yan; Lehmann, Eberhard; Estermann, Mirko and Pappot, Arie (2011). New insights into alloy compositions: studying Renaissance bronze statuettes by combined neutron imaging and neutron diffraction techniques. Journal of Analytical Atomic Spectroscopy, 26(5) pp. 949–958.

Verdonck, Patrick; Šamara, Vladimir; Goodyear, Alec; Ferchichi, Abdelkarim; Van Besien, Els; Baklanov, Mikhail R. and Braithwaite, Nicholas (2011). Influence of the ion bombardment of O2 plasmas on low-k materials. Thin Solid Films, 520(1) pp. 464–468.

Vopson, Melvin M.; Weaver, Paul M.; Cain, Markys G.; Reece, Mike J. and Chong, K. B. (2011). Polarization dynamics and non-equilibrium processes in ferroelectric switching. In: 2010 IEEE International Symposium on the Applications of Ferroelectrics (ISAF 2010), 9-12 August 2010 , Edinburgh, UK.

Vovk, R. V.; Nazyrov, Z. F.; Obolenskii, M. A.; Goulatis, I. L.; Chroneos, A. and Pinto Simoes, V. M. (2011). Phase separation in oxygen deficient HoBa2Cu3O7-δ single crystals: effect of high pressure and twin boundaries. Philosophical Magazine, 91(17) pp. 2291–2302.

Wang, Lu; Shang, Jia-Xiang; Wang, Fu-He; Zhang, Yue and Chroneos, Alexander (2011). Unexpected relationship between interlayer distances and surface/cleavage energies in γ -TiAl: density functional study. Journal of Physics: Condensed Matter, 23(26) p. 265009.

Whalley, W. R.; Jenkins, M. and Attenborough, K. (2011). The velocity of shear waves in saturated soil. Soil Science Society of America Journal, 75(5) pp. 1652–1657.

Wilson, Gordon; Abbott, Dina; de Kraker, Joop; Salgado Pérez, Paquita; Terwisscha van Scheltinga, Catharien and Willems, Patrick (2011). ‘The lived experience of climate change’: creating open educational resources and virtual mobility for an innovative, integrative and competence-based track at Masters level. International Journal of Technology Enhanced Learning,, 3(2) pp. 111–123.

Wynn, David C.; Eckert, Claudia and Clarkson, P. John (2011). Simulating intertwined design processes that have similar structures: a case study of a small company that creates made-to-order fashion products. International Journal of Product Development, 14(1-4) pp. 118–143.

Zamenopoulos, Theodore (2011). A complexity theory of design intentionality. Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 26(1) pp. 63–83.

Zapoozhets, Oleksandr; Tokarev, Vadim and Attenborough, Keith (2011). Aircraft Noise: Assessment, prediction and Control. London, UK and New York, USA: Spon Press (Taylor and Francis).

Zhang, Tao and Nuttall, William J. (2011). Evaluating government's policies on promoting smart metering diffusion in retail electricity markets via agent-based simulation*. Journal of Product Innovation Management, 28(2) pp. 169–186.

Zolghadri, Marc; Eckert, Claudia; Zouggar, Salah and Girard, Philippe (2011). Power-based supplier selection in product development projects. Computers in Industry, 62(5) pp. 487–500.

2010

Lévêque, François; Glachant, Jean-Michel; Barquin, Julian; von Hirschhausen, Christian; Holz, Franziska and Nuttall, William J. eds. (2010). Security of Energy Supply in Europe: Natural Gas, Nuclear and Hydrogen. Loyola de Palacio Series on European Energy Policy. Cheltenham, UK: Edward Elgar.

van Geenhuizen, Marina; Nuttall, William J.; Gibson, David and Oftedal, Elin M. eds. (2010). Energy and Innovation: Structural Change and Policy Implications. International Series on Technology Policy and Innovation. West Lafayette, IN: Purdue University Press.

Acar, M. O.; Bouchard, P. John; Quinta da Fonseca, Joao; Fitzpatrick, Michael E. and Gungor, Salih (2010). Intergranular strains in pre-strained and welded pipes. Materials Science Forum, 652 pp. 13–18.

Acar, Murat; Gungor, Salih; Bouchard, Peter and Fitzpatrick, M. E. (2010). Effect of prior cold work on the mechanical properties of weldments. In: Proceedings of the 2010 SEM Annual Conference and Exposition on Experimental and Applied Mechanics, 7-10 Jun 2010, Indianapolis, Indiana, USA.

Alevizou, Panagiota (2010). Mediating open education: popular discourses, situated policies and institutional practices for participatory learning. In: Media Communications and Cultural Studies Association (MeCCSA) Annual Conference, 6-8 January 2010, London School of Economics and Political Science, London, United Kingdom.

Alevizou, Panagiota; Wilson, Tina and McAndrew, Patrick (2010). Conceptualising collaborative participation and engagement for learning and creativity in OER communities. In: OER10 Conference, 22-24 March 2010, Cambridge, United Kingdom.

Alevizou, P. (2010). Media literacies in transition? A review of practices within higher education contexts. In: Media Literacy Conference, 19-20 Nov 2010, Institute of Education, London.

Alevizou, P.; Conole, G. and Galley, R. (2010). Using Cloudworks to Support OER Activities. Higher Education Academy, York.

Alevizou, Panagiota (2010). Distributed mentoring: peer interaction and collaborative learning in P2PU. In: Open ED 2010: Seventh Annual Open Education Conference, 2-4 November 2010, Barcelona, Spain.

Alevizou, Panagiota (2010). Book review: Ruth Wodak & Veronika Keller (eds.), Handbook of communication in the public sphere. Berlin: Mouton de Gruyter, 2008. Language in Society, 39(4) pp. 555–561.

Alevizou, Panagiota; Conole, Grainne; Culver, Juliette and Galley, Rebecca (2010). Ritual performances and collective intelligence: theoretical frameworks for analyising activity patterns in Cloudworks. In: 7th International Conference in Networked Learning, 3-5 May 2010, Aalborg, Denmark.

Alevizou, Panagiota and Forte, Andrea (2010). Engaging with open education. In: Panel in 6th International Symposium on Wikis and Open Collaboration, WikiSym '10, 7-9 July 2010, Gdansk, Poland.

Alexiou, Katerina (2010). Coordination and emergence in design. CoDesign: International Journal of CoCreation in Design and the Arts, 6(2) pp. 75–97.

Alexiou, Katerina; Johnson, Jeffrey and Zamenopoulos, Theodore (2010). Embracing complexity in design: emerging perspectives and opportunities. In: Inns, Tom ed. Designing for the 21st Century Volume 2: Research Methods & Findings. United Kingdom: Gower Ashgate, pp. 87–100.

Alink, Thomas; Eckert, Claudia; Ruckpaul, Anne and Albers, Albert (2010). Different function breakdowns for one existing product: experimental results. In: Design Computing and Cognition (DCC'10), July 2010, Stuttgart, Germany.

Aygu?n, Haydar; Attenborough, Keith; Lauriks, Walter and Langton, Christian M. (2010). Ultrasonic wave propagation in stereo-lithographical bone replicas. The Journal of the Acoustical Society of America, 127(6) pp. 3781–3789.

Bhamji, Imran; Preuss, Michael; Threadgill, Philip L.; Moat, Richard J.; Addison, Adrian C. and Peel, Matthew J. (2010). Linear friction welding of AISI 316L stainless steel. Materials Science and Engineering: A, 528(2) pp. 680–690.

Birch, Kean; Levidow, Les and Papaioannou, Theo (2010). Sustainable capital? The neoliberalization of nature and knowledge in the European “knowledge-based bio-economy”. Sustainability, 2(9) pp. 2898–2918.

Cai, Zhiming; Clarke, Richard H.; Glowacki, Bartek A.; Nuttall, William J. and Ward, Nick (2010). Ongoing ascent to the helium production plateau—Insights from system dynamics. Resources Policy, 35(2) pp. 77–89.

Caird, Sally and Roy, Robin (2010). Adoption and use of household microgeneration heat technologies. Low Carbon Economy, 1(2) pp. 61–70.

Caird, Sally and Roy, Robin (2010). Yes in my back yard: UK householders pioneering technologies. In: Devine-Wright, Patrick ed. Renewable Energy and the Public. London: Earthscan, pp. 203–219.

Caird, Sally; Roy, Robin and Potter, Stephen (2010). Heat pump user experiences, behaviour and satisfaction. The Open University Design Innovation Group, Milton Keynes UK.

Chang, Daphne (2010). An ethnographic examination of the assessment culture within the postgraduate Programme in Global Development Management (GDM). In: EARLI/Northumbria Assessment Conference 2010, 01-03 Sep 2010, Slaley Hall Hotel, Northumberland, UK.

Chataway, Joanna; Hanlin, Rebecca; Mugwagwa, Julius and Muraguri, Lois (2010). Global health social technologies: reflections on evolving theories and landscapes. Research Policy, 39(10) pp. 1277–1288.

Chilton, Tom; Burnley, Stephen and Nesaratnam, Suresh (2010). A life cycle assessment of the closed-loop recycling and thermal recovery of post-consumer PET. Resources Conservation and Recycling, 54(12) pp. 1241–1249.

Chroneos, A. (2010). Dopant-vacancy cluster formation in germanium. Journal of Applied Physics, 107(7)

Chroneos, A.; Jiang, C.; Grimes, R. W. and Schwingenschlögl, U. (2010). Special quasirandom structures for binary/ternary group IV random alloys. Chemical Physics Letters , 493(1-3) pp. 97–102.

Chroneos, A. and Londos, C. A. (2010). Interaction of A-centers with isovalent impurities in silicon. Journal of Applied Physics, 107(9)

Chroneos, A.; Vovk, R. V.; Goulatis, I. L. and Goulatis, L. I. (2010). Oxygen transport in perovskite and related oxides: a brief review. Journal of Alloys and Compounds , 494(1-2) pp. 190–195.

Chroneos, Alexander; Kube, R. V.; Bracht, H.; Grimes, R. W. and Schwingenschlögl, U. (2010). Vacancy-indium clusters in implanted germanium. Chemical Physics Letters, 490(1-3) pp. 38–40.

Chroneos, Alexander; Parfitt, David; Kilner, John A. and Grimes, Robin W. (2010). Anisotropic oxygen diffusion in tetragonal La2NiO4+δ: molecular dynamics calculations. Journal of Materials Chemistry, 20(2) pp. 266–270.

Conole, Grainne and Alevizou, Panagiota (2010). A literature review of the use of Web 2.0 tools in Higher Education. HEA Academy, York, UK.

Cook, Matthew (2010). Sustainable urban design experiments. In: ECCS 10 European Conference on Complex Systems, 13-17 Sep 2010, Lisbon, Portugal.

Cook, Matthew and Potter, Stephen (2010). Critical reflections on the performativity of transition frameworks in the making and remaking of places experienced as urban. In: EASST Conference 2010, 2-4 Sep 2010, Trento, Italy.

Crommentuijn-Marsh, Philipa; Eckert, Claudia and Potter, Stephen (2010). Consumer behaviour towards sustainability in fashion. In: KEER2010: Iinternational Conference on Kansei Engineering and Emotion Research 2010, 2-4 Mar 2010, Paris, France.

Dai, H. ; Mark, A. F.; Moat, R.; Shirzadi, A. A.; Bhadeshia, H. K. D. H.; Karlsson, L. and Withers, P. J. (2010). Modelling of residual stress minimization through martensitic transformation in stainless steel welds. In: 9th International Seminar on ‘Numerical analysis of weldability’, 28-30 Sep 2009, Graz, Austria,.

De Liddo, Anna and Alevizou, Panagiota (2010). A method and tool to support the analysis and enhance the understanding of peer-­to-­peer learning experiences. In: OpenED2010: Seventh Annual Open Education Conference, 2-4 Nov 2010, Barcelona, Spain.

Delamore, P. and Eckert, C. M. (2010). Engineering fashion: killer heels. In: 11th National Conference on Rapid Design, Prototyping & Manufacturing (RDPM 2010), 11 Jun 2010, Lancaster, United Kingdom.

Dennis, R. J.; Leggatt, N. A.; Smith, M. C. and Bouchard, P. J. (2010). R6 weld modelling guidelines - application to groove weld worked example. In: ASME PVP/K-PVP 2010, 18-22 July 2010, Seattle, WA, US.

Dewberry, Emma (2010). Escaping from the old ideas. Design Research Society.

Dewberry, Emma and Johnson, Jeffrey (2010). Design interventions, prediction and science in the sustainable transition of large, complex systems,. In: The 2nd International Conference on Design Engineering and Science (ICDES2010), 17-19 November, Tokyo.

Dewberry, Emma and Monterio de Barros, Margarida (2010). The fundamental role of ecological intelligence in creating resilient business practice. In: ‘Changing Times, New Challenges’: A Social Marketing and Socially Responsible Management Conference , 3 November 2010, Walton Hall, Milton Keynes, UK.

Eckert, C. M.; Blackwell, A. F.; Bucciarelli, L. L. and Earl, C. F. (2010). Shared conversations across design. Design Issues, 26(3) pp. 27–39.

Eckert, Claudia and Zolghadri, Marc (2010). Editorial. International Journal of Product Development, 12(1) pp. 1–5.

Eckert, Claudia M. and Clarkson, P. John (2010). Planning development processes for complex products. Research in Engineering Design, 21(3) pp. 153–171.

Eckert, C. M.; Alink, T. and Albers, A. (2010). Issue driven analysis of an existing product at different levels of abstraction. In: the 11th International Design Conference DESIGN 2010, 17-20 May 2010, Cavtat-Dubrovnik, Croatia.

Eckert, C. M.; Delamore, P. and Bell, C. (2010). Dialogue across design domains: rapid prototyping in aerospace and fashion. In: the 11th International Design Conference DESIGN 2010, 17-20 May 2010, Cavtat-Dubrovnik, Croatia.

Eckert, C. M. and Stacey, M. K. (2010). What is a process model? Reflections on the epistemology of design process models. In: Heisig, Peter; Clarkson, John and Vanja, Sandor eds. Modelling and Management of Engineering Processes. New York, USA: Springer, pp. 3–14.

Ekins, Paul and Potter, Stephen (2010). Reducing Carbon emissions through transport taxation, GFC Briefing Paper 6. Green Fiscal Commission, London, UK.

Endean, Mark; Bai, Bin and Du, Ruo (2010). Quality standards in online distance education. International Journal of Continuing Education and Lifelong Learning, 3(1) Art. no. 4.

Farrelly, Michael and Sullivan, Helen (2010). Discourses of democracy in neighborhood governance. Critical Policy Studies, 4(3) pp. 234–249.

Franco, Jenny; Levidow, Les; Fig, David; Goldfarb, Lucia; Hönicke, Mireille and Mendonça, Maria Luisa (2010). Assumptions in the European Union biofuels policy: frictions with experiences in Germany, Brazil and Mozambique. Journal of Peasant Studies, 37(4) pp. 661–698.

Gagg, Colin (2010). Failure of a machine tool three jaw chuck set. In: Fourth International Conference on Engineering Failure Analysis (ICEFA-IV), 04-07 Jul 2010, Churchill College, Cambridge, UK.

Gagg, Colin R. (2010). Failure of engineering ceramic products and structures - A case study compendium. In: Fourth International Conference on Engineering Failure Analysis (ICEFA-IV), 4-7 July 2010, Churchill College, Cambridge, UK.

Galley, R.; Conole, G. and Alevizou, P. (2010). Case Study: Using Cloudworks for an Open Literature Review. Open University, Milton Keynes, UK.

Ganguly, S.; James, J. A.; Fitzpatrick, M. E. and Tanguy, A. (2010). Automation of a neutron diffractometer for analysis of residual stress inside complex engineering components. Applied Physics A: Materials Science & Processing, 99(3) pp. 601–606.

Ganguly, S.; Edwards, L. and Fitzpatrick, M. E. (2010). Problems in using a comb sample as a stress-free reference for the determination of welding residual stress by diffraction. Materials Science and Engineering A, 528(3) pp. 1226–1232.

Gilbert, S.; Zamenopoulos, T.; Alexiou, K. and Johnson, J. (2010). Involvement of right dorsolateral prefrontal cortex in ill-structured design cognition: An fMRI study. Brain Research, 1312(C) pp. 79–88.

Gottberg, Annika; Longhurst, Phillip J. and Cook, Matthew B. (2010). Exploring the potential of product service systems to achieve household waste prevention in the UK. Waste Management and Research, 28(3) pp. 228–235.

Grimes, Robin W. and Nuttall, William (2010). Generating the option of a two-stage nuclear renaissance. Science, 329(5993) pp. 799–803.

Hales, David (2010). Mix, chain and replicate: methodologies for agent-based modelling of social systems. In: Mollona, Edoardo ed. Computational Analysis of Firms’ Organization and Strategic Behaviour. Routledge Research in Strategic Management. Abingdon, UK and New York, USA: Routledge, pp. 106–122.

Hales, David (2010). Rationality meets the tribe: recent models of cultural group selection. In: Mollona, Edoardo ed. Computational Analysis of Firms’ Organization and Strategic Behaviour. Routledge Research in Strategic Management. Abingdon, UK and New York, USA: Routledge, pp. 231–246.

Hall, Andy and Clark, Norman (2010). What do complex adaptive systems look like and what are the implications for innovation policy? Journal of International Development, 22(3) pp. 308–324.

Hanlin, Rebecca and Sutz, Judith (2010). Where are the flags of our fathers? Rethinking linkages between social policies and innovation policies. AJSTID African Journal of Science, Technology and Innovation for Development, 2(3) pp. 153–169.

Hanlon, Joseph (2010). Frelimo landslide in tainted election in Mozambique. Review of African Political Economy, 37(123) pp. 92–95.

Hanlon, Joseph; Barrientos, Armando and Hulme, David (2010). Just Give Money to the Poor: The Development Revolution from the Global South. Sterling, VA, USA: Kumarian.

Hanlon, Joseph (2010). Mozambique: 'the war ended 17 years ago, but we are still poor'. Conflict, Security and Development, 10(1) pp. 77–102.

Hanlon, Joseph and Cunguara, Benedito (2010). Poverty is not being reduced in Mozambique. LSE Crisis States Research Centre.

Hanlon, Joseph and Mosse, Marcelo (2010). Mozambique’s Elite – Finding its Way in a Globalized World and Returning to Old Development Models. UNU-Wider.

Hart, Jennefer; Zamenopoulos, Theodore and Garner, Steven (2010). The learningscape of a virtual design atelier. In: 8th eLearning@Greenwich conference, 7 July 2010, University of Greenwich, UK.

Hetherington, Robina; Laney, Robin and Peake, Stephen (2010). Zero and low carbon buildings: A driver for change in working practices and the use of computer modelling and visualization. In: 14th International Conference on Information Visualisation, 27-29 July 2010, London South Bank University, London, UK.

Hetherington, Robina; Laney, Robin C. and Peake, Stephen (2010). Software engineering challenges: Achieving zero carbon buildings by 2019. In: ACM-BCS Visions of Computer Science 2010, 13-16 April 2010, Edinburgh University.

Hodgson, Paul and Potter, Stephen (2010). Refining light rapid transit typology: a UK perspective. Transportation Planning and Technology, 33(4) pp. 367–384.

Holden, Georgina (2010). Using Web2 for peer support and learning. In: Learning Futures Festival, 11 -14 Jan 2010, University of Leicester - online conference.

Holden, Georgy (2010). Case study: sharing images, creating communities. In: Kear, Karen ed. Online and Social Networking Communities: A Best Practice Guide for Educators. The Open and Flexible Learning Series. Abingdon: Routledge.

Hosseinzadeh, Foroogh; Toparli, Muhammed and Bouchard, Peter (2010). Residual stress measurements in an edge welded beam specimen. In: ASME 2010 Pressure Vessels and Piping Conference, 18 - 22 Jul 2010, Bellevue, Seattle Washington .

Hosseinzadh, Foroogh; Bouchard, P. John and James, Jonathan A. (2010). Measurements of Residual Stress in a Welded Compact Tension Specimen Using the Neutron Diffraction and Slitting Techniques. Materials Science Forum, 652 pp. 210–215.

Ieromonachou, Petros and Warren, James (2010). Flows, accommodation and revenue: an analysis of tourism trends in Cyprus. In: International Conference on Sustainable Tourism: Issues, Debates and Challenges, 21-25 Apr 2010, Crete & Santorini, Greece.

Ieromonachou, Petros; Warren, James and Potter, Stephen (2010). The Olympic transport legacy. Town and Country Planning, 79(7) pp. 331–336.

Johnson, Jeffrey (2010). The future of the social sciences and humanities in the science of complex systems. Innovation: The European Journal of Social Science Research, 23(2) pp. 115–134.

Kale, Dinar (2010). The Distinctive Patterns of Dynamic Learning and inter-firm Differences in the Indian Pharmaceutical Industry. British Journal of Management, 21(1) pp. 223–238.

Kale, Dinar (2010). Internationalisation strategies of Indian pharmaceutical firms. PharmaBuzz, 5(10) pp. 6–13.

Kale, Dinar (2010). Sources of innovation and technological capability development in the Indian automobile industry. In: 8th GLOBELICS International Conference, Making Innovation Work for Society: Linking, Leveraging and Learning, 01-03 November 2010, Kuala Lumpur, Malaysia.

Kale, Dinar (2010). Comparative analysis of Indian pharmaceutical and medical devices sector. In: Pharmaceuticals in Developing and Emerging Economies: Production, Innovation, and Access to Medicines in the wake of TRIPS, 17 - 19 Sept 2010, Hyderabad, India.

Kale, Dinar and Little, Stephen (2010). Globalisation, migration and knowledge transfer: the reconfiguration of R&D capability in Indian pharmaceutical firms. In: Singh, P. and Verma, S. eds. Organizing and Managing in the Era of Globalization. New Delhi: Sage.

Kaplinsky, Raphael (2010). Asian drivers, commodities prices and the terms of trade. In: Nissanke, Machiko and Mavrotas, George eds. Commodities, governance and economic development under globalization. Basingstoke: Palgrave Macmillan.

Kaplinsky, Raphael (2010). The role of standards in global value chains and their impact on economic and social upgrading. World Bank.

Kaplinsky, Raphael and Farooki, Masuma (2010). What are the implications for global value chains when the market shifts from the north to the south? The World Bank.

Kaplinsky, Raphael and Farooki, Masuma (2010). Global value chains, the crisis, and the shift in markets from the north to the south. In: Cattaneo, Oliver; Gereffi, Gary and Staritz, Cornelia eds. Global Value Chains in a Postcrisis World: A Development Perspective,. Washington DC, USA: World Bank, pp. 125–154.

Kaplinsky, Raphael; McCormick, Dorothy and Morris, Mike (2010). China and Sub Saharan Africa: impacts and challenges of a growing relationship. In: Padayachee, V. ed. The Politcal Economy of Africa. London: Routledge.

Kaplinsky, Raphael; McCormick, Dorothy and Morris, Mike (2010). Impacts and challenges of a growing relationship between China and sub-Saharan Africa. In: Padayachee, Vishnu ed. The Political Economy of Africa. London: Routledge, pp. 389–409.

Kaplinsky, Raphael and Terheggen, Anne (2010). What happens when the market shifts to China? The Gabon timber and Thai cassava value chains. The World Bank.

Kaplinsky, Raphael; Terheggen, Anne; Tijaja, Julia and Farooki, Masuma (2010). What happens in global value chains when the markey shifts from the north to the south? World Bank.

Karlsson , L.; Mráz , L.; Bhadeshia , H. K. D. H and Shirzadi, A. A. (2010). Comparison of alloying concepts for Low Transformation Temperature (LTT) welding consumables. In: Advanced Welding Technologies, 19 -21 October 2010, Sosnowiec, Poland.

Khan, M. K.; Hainsworth, S. V.; Fitzpatrick, M. E. and Edwards, L. (2010). A combined experimental and finite element approach for determining mechanical properties of aluminium alloys by nanoindentation. Computational Materials Science, 49(4) pp. 751–760.

Kleber, X. and Pirfo Barroso, S. (2010). Investigation of shot-peened austenitic stainless steel 304L by means of magnetic Barkhausen noise. Materials Science and Engineering A, 527(21-22) pp. 6046–6052.

Kruse, Roland and Taherzadeh, Shahram (2010). The influences of environmental conditions on source localisation using a single vertical array and their exploitation through ground effect inversion. German Science Foundation, Bonn, Germany.

Krynkin, Anton; Umnova, Olga; Chong, Alvin Yung Boon; Taherzadeh, Shahram and Attenborough, Keith (2010). Predictions and measurements of sound transmission through a periodic array of elastic shells in air. Journal of the Acoustical Society of America, 128(6) pp. 3496–3506.

Lalvani, Himanshu; Rist, Martin and Brooks, Jeffery W. (2010). Effect of Delta Phase on the Hot Deformation Behaviour and Microstructural Evolution of Inconel 718. Advanced Materials Research, 89-91 pp. 313–318.

Langendahl, Per-Anders; Cook, Matthew and Potter, Stephen (2010). Exploring a case of the eco-innovation journey in the UK food processing sector. In: EASST Conference 2010, 02-04 Sep 2010, Trento, Italy.

Langendahl, Per-Anders; Cook, Matthew and Potter, Stephen (2010). Analysing the eco-innovation process in a UK food processing firm. In: 15th International Conference Sustainable Innovation 2010, 8-9 Nov 2010, Rotterdam, Netherlands.

Lawes, S. D. A.; Hainsworth, S. V. and Fitzpatrick, M. E. (2010). Impact wear testing of diamond-like carbon films for engine valve-tappet surfaces. Wear, 268(11-12) pp. 1303–1308.

Levidow, Les and Carr, Susan (2010). EU agbiotech controversy: what has been on trial? Soziale Technik , Graz.

Levidow, Les and Paul, Helena (2010). Global agrofuel crops as contested sustainability, Part I: Sustaining what development? Capitalism Nature Socialism, 21(2) pp. 64–86.

Lewis, Peter and Gagg, Colin (2010). Forensic polymer engineering: why polymer products fail in service. Cambridge: Woodhead Publishing Limited.

Liljedahl, C. D. M.; Zanellato, O.; Fitzpatrick, M. E.; Lin, J. and Edwards, L. (2010). The effect of weld residual stresses and their re-distribution with crack growth during fatigue under constant amplitude loading. International Journal of Fatigue, 32(4) pp. 735–743.

Lloyd, Peter and Busby, Jerry (2010). Softening up the facts: engineers in design meetings. In: Buchanan, Richard; Doordan, Dennis and Margolin, Victor eds. The Designed World: Images, Objects, Environments. Berg Publishers, pp. 247–259.

Lloyd, Peter and Snelders, Dirk (2010). What was Phillippe Starck thinking of? In: Lees-Maffei, Grace and Houze, Rebecca eds. The Design History Reader. Berg, pp. 200–206.

Mamou-Mani, A. and Sharp, D. B. (2010). Evaluating the suitability of acoustical measurement techniques and psychophysical testing for studying the consistency of musical wind instrument manufacturing. Applied Acoustics, 71(7) pp. 668–674.

Mamou-Mani, Adrien; Sharp, David; Meurisse, Thibaut and Ring, William (2010). Investigating oboe manufacturing consistency by comparing the acoustical properties of five nominally identical instruments. In: ViennaTalk 2010, 19-21 Sept 2010, Vienna, Austria.

Martin, Keith (2010). Improved performance of hydrodynamic bearings by proactive adjustment. In: 9th EDF/Pprime (LMS) Poitiers Workshop: “Improvement of Bearing Performance and Evaluation of Adverse Conditions”, 7-8 Oct 2010, University of Poitiers, France.

Martin, Keith (2010). Energy savings and improved precision with adjustable hydrodynamic bearings. In: 2010 STLE Annual Meeting & Exhibition, 16-20 May 2010, Las Vegas, USA.

Martin, Keith and Meechan, Michael (2010). An innovative supported distance learning approach to motorsport industry employee education and upskilling. In: Brookes Learning and Teaching Conference 2010, 25 Jun 2010, Oxford, UK.

Martin, Keith and Meechan, Michael (2010). An innovative approach to motorsport industry employee education. In: Vehicle Dynamics Expo 2010, 22-24 Jun 2010, Stuttgart, Germany.

Milne, Andrew J.; Prechtl, Anthony; Laney, Robin and Sharp, David B. (2010). Spectral pitch distance and microtonal melodies. In: Proceedings of the International Conference of Music Perception and Cognition 2010 (ICMPC 11), 23-27 Aug 2010, Seattle, USA.

Milne, Andrew J.; Sethares, William A.; Laney, Robin and Sharp, David B. (2010). Metrics for pitch collections. In: Proceedings of the International Conference of Music Perception and Cognition 2010 (ICMPC 11), 23-27 Aug 2010, Seattle, USA.

Mohan, Giles (2010). Local and regional 'development studies'. In: Pike, Andy; Rodríguez-Pose, Andres and Tomaney, John eds. Handbook of Local and Regional Development. London: Routledge, pp. 43–55.

Morlock, A.; Sutton, Y. C.; Braithwaite, N. St.J and Grady, M. M. (2010). Chondrules born in plasma: laboratory simulations of circumstellar processes. In: 73rd Annual Meeting of the Meteoritical Society, 26-30 July 2010, New York City, USA.

Morlock, Andreas; Sutton, Yvonne; Braithwaite, N. St.J and Grady, Monica (2010). Experiments in chondrule formation: simulations of gas-grain collisions using plasma arcs. In: Lunar and Planetary Society Meeting 2010, March 2010, Houston.

Mugwagwa, Julius (2010). Alone or together? Can cross-national convergence of biosafety systems contribute to food security in SSA? Journal of International Development, 22(3) pp. 352–366.

Mugwagwa, Julius; Hanlin, Rebecca; Iluyemi, Adesina; Chataway, Jo; Wield, David and Smith, James (2010). Systems of health innovation in Africa: policy lessons from home and abroad. In: Second Science with Africa Conference, 23 - 25 June 2010, Addis Ababa, Ethiopia.

Mugwagwa, Julius T.; Wamae, Watu and Outram, Simon M. (2010). Agricultural innovation and food security in Sub-Saharan Africa: Tracing connections and missing links. Journal of International Development, 22(3) pp. 283–288.

Muir Wood, A. P.; Moultrie, J. and Eckert, C. M. (2010). Product form evolution. In: Silva, A. and Simoes, R. eds. Handbook of Research on Trends in Product Design and Development: Technological and Organizational Perspectives. Hershey, PA: Business Science Reference.

Murphy, S. T.; Chroneos, A.; Jiang , C.; Schwingenschlögl, U. and Grimes, R. W. (2010). Deviations from Vegard's law in ternary III-V alloys. Physical Review B, 82(7) 073201.

Northover, S. M. (2010). The role of EBSD in studying creep in metals. In: Electron Backscatter Diffraction Meeting, 29-30 Mar 2010, Derby.

Northover, S. M. (2010). Using size distributions for determining growth mechanisms of grain boundary precipitates. In: TMS 2010, 14-18 Feb 2010, Seattle.

Oreszczyn, Sue; Lane, Andrew and Carr, Susan (2010). The role of networks of practice and webs of influencers on farmers’ engagement with and learning about agricultural innovations. Journal of Rural Studies, 26(4) pp. 404–417.

Paddea, S.; Francis, J. A.; Paradowska, A.; Bouchard, P. and Shiblis, I. A. (2010). Characterisation of residual stresses in a welded P91 steel pipe section using neutron diffraction. In: 8th European Conference on Residual Stresses, 26-28 June 2010, Riva del Garda, Italy.

Papaioannou, Theo (2010). Robert Nozick's Moral and Political Theory: A Philosophical Critique of Libertarianism. Lewiston, New York: Edwin Mellen Press.

Papaioannou, Theo (2010). Innovation, justice and politics. In: 60th Political Studies Association, 29 Mar - 1 Apr 2010, Edinburgh .

Parfitt, David; Chroneos, Alexander; Kilner, John A. and Grimes, Robin W. (2010). Molecular dynamics study of oxygen diffusion in Pr2NiO4+δ. Physical Chemistry Chemical Physics , 12(25) pp. 6834–6836.

Peake, Stephen (2010). Policymaking as design in complex systems - the international climate change regime. Emergence: Complexity and Organization, 12(2) pp. 15–22.

Peake, Stephen (2010). Turbulence in the climate regime. Current History, 109(730) pp. 349–354.

Peet, M.J. and Shirzadi, Amir (2010). Neural network modelling of hot deformation of austenite. In: 6th International Conference on Physical and Numerical Simulation of Materials Processing, 16-19 November 2010, Guilin, China.

Pirfo Barroso, S.; Horváth, M. and Horváth, Á. (2010). Magnetic measurements for evaluation of radiation damage on nuclear reactor materials. Nuclear Engineering and Design, 240(4) pp. 722–725.

Porporator, Marcela and Robbins, Peter (2010). Privatisation and corporate governance in emerging economies: What went wrong with Aguas Argentinas S.A.? International Journal of Economics and Business Research, 2(3-4) pp. 187–209.

Potter, Stephen (2010). Transport integration - an impossible dream? In: Universities Transport Studies Group Annual Concerence, 5-7 January 2010, University of Plymouth.

Potter, Stephen; Roby, Helen; Cook, Matthew and Langendahl, Per-Anders (2010). Transport and environmental innovation. In: ‘State of the Art’ in Sustainable Innovation and Design, 24-25 October 2011, Farnham, UK.

Power, Marcus and Mohan, Giles (2010). Towards a critical geopolitics of China's engagement with African development. Geopolitics, 15(3) pp. 462–495.

Power, Marcus and Mohan, Giles (2010). China and the geopolitical imagination of African ‘development’. In: Dent, Christopher M. ed. China and Africa Development Relations. Routledge Contemporary China Series. Abingdon, U.K and New York, NY, U.S.: Routledge, pp. 42–67.

Prakash, D. G. Leo; Ding, R.; Moat, R. J.; Jones, I.; Withers, P. J.; Fonseca, J. Quinta da and Preuss, M. (2010). Deformation twinning in Ti-6Al-4V during low strain rate deformation to moderate strains at room temperature. Materials Science and Engineering: A, 527(21-22) pp. 5734–5744.

Prats, Miquel; Garner, Steve; Jowers, Iestyn; McKay, Alison and Pedreira, Nieves (2010). Interpretation of geometric shapes – an eye movement study. In: Symposium on Eye Tracking Research and Applications, 22-24 Mar 2010, Austin, Texas.

Rahman, R.; Hales, D.; Vinkó, T.; Pouwelse, J. and Sips, H. (2010). No more crash or crunch: sustainable credit dynamics in a P2P community. In: 2010 International Conference on High Performance Computing and Simulation (HPCS 2010), 28 June - 2 July 2010, Caen, Normandy, France.

Rahman, Rameez; Meulpolder, Michel; Hales, David; Pouwelse, John; Epema, Dick and Sips, Henk (2010). Improving efficiency and fairness in P2P systems with effort-based incentives. In: 2010 IEEE International Conference on Communications (ICC), 23-17 May 2010, Cape Town, South Africa.

Rao, Ashwin; Bouchard, Peter and Fitzpatrick, M. E. (2010). Anelasticity in austenitic steels. Ceramic Transactions, 222 pp. 133–143.

Rapanta, Chrysi; Schadewitz, Nicole and Holden, Georgina (2010). Design and communication patterns observed in an eLearning design team: A case-study. In: World Conference on Educational Multimedia, Hypermedia and Telecommunications (Ed-Media 2010), 29 Jun 2010, Toronto, Canada.

Rasoulifar, Rahi; Zolghadri, Marc and Eckert, Claudia (2010). The need for a tool to exchange information in non-hierarchical network of the electrtonic Industry: an european project. In: Design 2010, 17-20 May 2010, Dubrovnik, Croatia.

Robbins, Peter T. (2010). Partnerships and sustainability in the tea industry: a critical analysis of dynamics between smallholders and estates in Tanzania. Journal of Sustainable Agriculture, 34(8) pp. 862–877.

Roby, Helen (2010). Using innovation and business models to analyse the organisational embedding of travel plans. PhD thesis The Open University.

Roy, Robin; Caird, Sally and Potter, Stephen (2010). Getting warmer: a field trial of heat pumps. The Energy Saving Trust, London, UK.

Schreiber, Martin; Lutz, Tarek; Keeley, Gareth P.; Kumar, Shishir; Boese, Markus; Krishnamurthy, Satheesh and Duesberg, Georg S. (2010). Transparent ultrathin conducting carbon films. Applied Surface Science, 256(21) pp. 6186–6190.

Schwingenschlögl, U.; Chroneos, A.; Schuster, C. and Grimes, R. W. (2010). Extrinsic doping in silicon revisited. Applied Physics Letters, 96(24) p. 242107.

Shirzadi, A. A. and Bhadeshia, H. K. D. H. (2010). Accumulation of stress in constrained assemblies: novel Satoh test configuration. Science and Technology of Welding & Joining, 15(6) pp. 497–499.

Stacey, Martin and Eckert, Claudia (2010). Reshaping the box: creative designing as constraint management. International Journal of Product Development, 11(3/4) pp. 241–255.

Steuwer, A.; Rahman, M; Shterenlikht, A.; Fitzpatrick, M. E.; Edwards, L. and Withers, P.J. (2010). The evolution of crack-tip stresses during a fatigue overload event. Acta Materialia, 58(11) pp. 4039–4052.

Sutton, Y.; Johnson, P. C.; Sharp, D.; Moore, J. and Braithwaite, N. St.J (2010). Ausio sound reproduction by thermal expansion in an RF generated plasma. In: Institute of Physics Plasma Physics Group Conference 2010, March 2010.

Sutton, Y.; Naidis, G. V.; Johnson, P. C.; Sharp, D.; Moore, J. and Braithwaite, N. St.J (2010). Visualising gas heating from an RF plasma loudspeaker. In: GEC & IRCP 2010, Paris, France.

Tan-Mullins, May; Mohan, Giles and Power, Marcus (2010). Redefining 'aid' in the China–Africa context. Development and Change, 41(5) pp. 857–881.

Walker, Mark; Bissell, Christopher and Monk, John (2010). The PLC: a logical development. Measurement + Control, 43(9) pp. 280–284.

Wamae, Watu and Mugwagwa, Julius (2010). Reconciling multiple interests in policy making: the case of biotechnology and agricultural innovation in Africa. In: Second Science with Africa Conference, 23 - 25 June, 2010, Addis Ababa, Ethiopia.

Warren, James and Avila, Jordi Mirabent (2010). Modelling urban bus transport emissions in Santiago de Cuba. In: 6th Cuban Congress on Mechanical Engineering (CCIM2010), 29 Nov - 03 Dec 2010, Palacio de Convenciones, de La Habana.

Warren, James P. and Enoch, Marcus P. (2010). Island transport, car ownership and use: A focus on practices in Cuba, Malta, Mauritius and Singapore. Island Studies Journal, 5(2) pp. 193–216.

Wield, David (2010). The role of social science in UK science and technology policy. In: Yang, Jian and Liu, Bing eds. The Social Action of Science and Technology. Beijing: Tsinghua University Press, pp. 282–290.

Wield, David; Chataway, Joanna and Bolo, Maurice (2010). Issues in the political economy of agricultural biotechnology. Journal of Agrarian Change, 10(3) pp. 342–366.

Zamenopoulos, Theodore and Alexiou, Katerina (2010). The influence of complexity science in design: theoretical and methodological tools. In: Tsoukala, K.; Daniil, M. and Pantelidou, H. eds. Postmodern Approaches. Thessaloniki, GR: Epikentro.

Zolghadri, Marc; Eckert, Claudia and Rasoulifar, Rahi (2010). Modelling decision and data dependencies in engineer-to-order project management. In: 12th International DSM Conference 2010, 22-23 July 2010, Cambridge.

2009

Fawssett, Susan; Hanlin, Rebecca; Le Mare, Ann; Papaioannou, Theodoros and Wilson, Gordon eds. (2009). Introducing Development. Milton Keynes: Open University Worldwide.

Lyall, Catherine; Papaioannou, Theo and Smith, James eds. (2009). The limits to governance: The challenge of policy-making for the new life sciences. Farnham, UK: Ashgate.

McDonnell, Janet and Lloyd, Peter eds. (2009). About: Designing - Analysing Design Meetings. UK: Taylor and Francis.

Wilson, Gordon; Furniss, Pamela and Kimbowa, Richard eds. (2009). Environment, Development, and Sustainability: Perspectives and cases from around the world. Oxford, UK: Oxford University Press.

Abenyenga, Olivia; Burgess, Paul J.; Cook, Matthew and Morris, Joe (2009). Application of an ecosystem function framework to perceptions of community woodlands. Land Use Policy, 26(3) pp. 551–557.

Acar, Murat; Gungor, Salih; Ganguly, Supriyo; Bouchard, Peter and Fitzpatrick, M. E. (2009). Variation of mechanical properties in a multi-pass weld measured using digital image correlation. In: Society of Experimental Mechanics Annual Conference on Experimental and Applied Mechanics 2009, 1-4 Jun 2009, Albuquerque, New Mexico, USA.

Ajakaiye, Olusanya and Kaplinsky, Raphael (2009). Special Issue of European Journal of Development Research - China in Africa: A Relationship in Transition. Palgrave, UK.

Alexiou, K.; Zamenopoulos, T.; Johnson, J. H. and Gilbert, S. J. (2009). Exploring the neurological basis of design cognition using brain imaging: some preliminary results. Design Studies, 30(6) pp. 623–647.

Alexiou, Katerina (2009). Complexity and coordination in collaborative design. In: Alexiou, Katerina; Johnson, Jeffrey and Zamenopoulos, Theodore eds. Embracing Complexity in Design. London, UK: Routledge, pp. 73–93.

Alexiou, Katerina; Johnson, Jeffrey and Zamenopoulos, Theodore (2009). Embracing Complexity in Design. UK: Routledge.

Ariyo, Owolabi O.; Eckert, Claudia M. and Clarkson, P. John (2009). Challenges in identifying the knock-on effects of engineering change. International Journal of Design Engineering, 2(4) pp. 414–431.

Arnold, B.J.; Krishnamurthy, S.; Kennedy, B.; Cockburn, D.; McNally, D.; Lunney, J.G.; Gunning, R.; Venkatesan, M.; Alaria, J.; Michael, J.; Coey, D.; McGuinnessy, C. and Guo, J.-H. (2009). Growth and characterisation of Al 1-xCr xN thin films by RF plasma assisted pulsed laser deposition. e-Journal of Surface Science and Nanotechnology, 7 pp. 497–502.

Ashley, N. J.; Parfitt, D.; Chroneos, A. and Grimes, R. W. (2009). Mechanisms of nonstoichiometry in HfN1-x. Journal of Applied Physics, 106(8)

Athreye, Suma; Kale, Dinar and Ramani, Shyama V. (2009). Experimentation with strategy and the evolution of dynamic capability in the Indian pharmaceutical sector. Industrial and Corporate Change, 18(4) pp. 729–759.

Aygu?n, Haydar; Attenborough, Keith; Postema, Michiel; Lauriks, Walter and Langton, Christian M. (2009). Predictions of angle dependent tortuosity and elasticity effects on sound propagation in cancellous bone. Journal of the Acoustical Society of America, 126(6) pp. 3286–3290.

Barry, N.; Hainsworth, S. V. and Fitzpatrick, M. E. (2009). Effect of shot peening on the fatigue behaviour of cast magnesium A8. Materials Science and Engineering A, 507(1-2) pp. 50–57.

Berry, Craig and Gabay, Clive (2009). Transnational political action and 'global civil society' in practice: the case of Oxfam. Global Networks, 9(3) pp. 339–358.

Birkett, Stacey; Lloyd, Peter and Garner, Steve (2009). The development of responsibility in product designers. In: Proceedings of International Association of Societies of Design Research (IASDR09) conference, 18-22 Oct 2009, Seoul, South Korea.

Black, Sandy; Eckert, Claudia; Watkins, Penelope; Delamore, Philip; Geesin, Frances and Harkin, Steven (2009). Considerate design for personalized fashion: towards sustainable production. In: Proceedings of MCPC09, 2009, Helsinki.

Blackmore, Roger (2009). Climate change: causes and consequences. In: Wilson, Gordon; Furniss, Pamela and Kimbowa, Richard eds. Environment, Development, and Sustainability: Perspectives and cases from around the world. Oxford, UK: Oxford University Press, pp. 103–112.

Blackwell, A. D; Eckert, C. M.; Bucciarelli, L. L and Earl, C. F. (2009). Witnesses to design: A phenomenology of comparative design. Design Issues, 25(1) pp. 36–47.

Bouchard, P. J. (2009). The NeT bead-on-plate benchmark for weld residual stress simulation. International Journal of Pressure Vessels and Piping, 86(1) pp. 31–42.

Bouchard, P. John; Turski, Mark and Smith, Mike C. (2009). Residual stress concentrations in a stainless steel slot-weld measured by the contour method and neutron diffraction. In: Pressure Vessels and Piping Conference , 26–30 July 2009 , Prague.

Boyle, Godfrey (2009). Cities and climate change: leading to a low carbon London. In: Wilson, Gordon; Furniss, Pamela and Kimbowa, Richard eds. Environment, Development, and Sustainability: Perspectives and cases from around the world. Oxford, UK: Oxford University Press, pp. 185–193.

Braithwaite, Nick; Al-Kuzee, Jafar; Lima, Paulo and Kowal, Jan (2009). Surface activation and direct bonding of semiconductor wafers. The Open University, GB 2458256.

Brieva, A. C.; Alves, L.; Krishnamurthy, S. and Šiller, L. (2009). Gold surface with gold nitride-a surface enhanced Raman scattering active substrate. Journal of Applied Physics, 105(5)

Burnley, Stephen; Kimbowa, Richard and Banadda Nswa, Isaac (2009). Municipal waste management and the environmental health challenge: a tale of two cities. In: Wilson, Gordon; Furniss, Pamela and Kimbowa, Richard eds. Environment, Development, and Sustainability: Perspectives and cases from around the world. Oxford, UK: Oxford University Press, pp. 139–148.

Chataway, Joanna; Robbins, Peter and Smith, James (2009). Exploring participation in science, technology, and innovation: tissue culture bananas in Kenya. In: Wilson, Gordon; Furniss, Pamela and Kimbowa, Richard eds. Environment, Development, and Sustainability: Perspectives and cases from around the world. Oxford, UK: Oxford University Press, pp. 194–202.

Chataway, J.; Chaturvedi, K.; Hanlin, R.; Mugwagwa, J.; Wield, D. and Smith, J. (2009). Technological trends and opportunities to combat diseases of the poor in Africa. In: Kalua, Fetson; Awotedu, Abolade; Kamwanja, Leonard and Saka, John eds. Science, Technology and Innovation for Public Health in Africa. Pretoria, Republic of South Africa.: NEPAD Office of Science and Technology, pp. 53–93.

Chataway, Jo; Hanlin, Rebecca; Muraguri, Lois and Wamae, Watu (2009). PDPs as social technology innovators in global health: operating above and below the radar. In: Penea, Oana ed. Innovating for the Health of All. Global Forum Update on Research for Health (6). Geneva: Global Forum for Health Research, pp. 123–126.

Chataway, Joanna; Chaturvedi, Kalpana; Hanlin, Rebecca; Mugwagwa, Julius; Smith, James and Wield, David (2009). Building the case for systems of health innovation in Africa. In: Kalua, Fetson; Awotedu, Abolade; Kamwanja, Leonard and Saka, John eds. Science, Technology and Innovation for Public Health in Africa. Pretoria, Republic of South Africa: NEPAD Office of Science and Technology, pp. 7–52.

Chroneos, A.; Grimes, R. W. and Bracht, H. (2009). Impact of germanium on vacancy clustering in germanium-doped silicon. Journal of Applied Physics, 105(1)

Chroneos, A.; Grimes, R. W. and Bracht, H. (2009). Fluorine codoping in germanium to suppress donor diffusion and deactivation. Journal of Applied Physics, 106(6)

Chroneos, A.; Jiang, C.; Grimes, R. W.; Schwingenschlögl, U. and Bracht, H. (2009). E centers in ternary Si1-x-yGexSny random alloys. Applied Physics Letters, 95(11) p. 112101.

Chroneos, A.; Jiang, C.; Schwingenschlögl, U. and Bracht, H. (2009). Defect interactions in Sn1-xGex random alloys. Applied Physics Letters, 94(25) p. 252104.

Chroneos, Alexander (2009). Effect of germanium substrate loss and nitrogen on dopant diffusion in germanium. Journal of Applied Physics, 105(5)

Chyong Chi, Kong; Nuttall, William J. and Reiner, David M. (2009). Dynamics of the UK natural gas industry: system dynamics modelling and long-term energy policy analysis. Technological Forecasting & Social Change, 76(3) pp. 339–357.

Clark, Norman and Chataway, Joanna (2009). Below the radar: a fresh approach to innovation and development policy. International journal of technology management & sustainable development , 8(3) pp. 171–175.

Clark, Norman; Chataway, Joanna; Hanlin, Rebecca; Kale, Dinar; Kaplinsky, Raphael; Muraguri, Lois; Papaioannou, Theo; Robbins, Peter and Wamae, Watu (2009). Below the radar: What does innovation in the asian driver economies have to offer other low income economies. Economic and Social Research Council.

Cvejic, R.; Cook, M. and White, S. (2009). Implementation of the Water Framework Directive as a sociable process in spatial planning. In: 8th International Conference of the European Society of Ecological Economics, 29 Jun - 2 Jul 2009, Ljubljana, Slovenia.

de Renzio, Paolo and Hanlon, Joseph (2009). Mozambique: Contested Sovereignty? The Dilemmas of Aid Dependence. In: Whitfield, Lindsay ed. The Politics of Aid: African Strategies for Dealing with Donors. Oxford: Oxford University Press, pp. 246–270.

Dewberry, Emma (2009). Nurturing ecological habits of mind in design. 2012 Imperative Teach-In.

Dewberry, Emma and Monteiro de Barros , Margarida (2009). Exploring the need for more radical sustainable innovation: what does it look like and why? International Journal of Sustainable Engineering, 2(1) pp. 28–39.

Earl , Christopher and Jowers, Iestyn (2009). The construction of curved shapes. Environment and Planning B: Planning and Design, 37(1) pp. 42–58.

Eckert, C.; Potter, S. and Crommentuijn, P. (2009). An investigation into consumers’ attitudes towards sustainability within the context of fashion. In: Sustainable Innovation 09: Towards a Low Carbon Innovation Revolution, 26-27 October 2009, Farnham, UK.

Eckert, C.M.; De Weck, O.; Keller, R. and Clarkson, P.J. (2009). Engineering change: drivers, sources and approaches in industry. In: 17th International Conference on Engineering Design (ICED'09), 2009, Stanford, California.

Eckert, Claudia and Delamore, Philip (2009). Innovation the long way round: transferring rapid prototyping technology into fashion design. In: International Conference on Engineering Design (ICED'09), 2009, Stanford, CA.

Eckert, Claudia; Keller, R and Clarkson, P.J. (2009). Complexity in engineering design. In: Alexiou, Katerini; Johnson, Jeffrey and Zamenopoulos, Theodore eds. Embracing Complexity in Design. Routledge.

Eckert, Claudia; Wyatt, David and Clarkson, John (2009). The elusive act of synthesis: Creativity in conceptual design of complex engineering products. In: ACM Creativity and Cognition 2009, 27-30 Oct 2009, Berkeley, California.

Eckert, Claudia; Wynn, David and Clarkson, John (2009). Design customisation in multi-project environments: using process simulation to explore the issues. In: 8th International Symposium on Tools and Methods of Competitive Engineering (TMCE 2010), 12-16 Apr 2010, Ancona, Italy.

Edmonds, Bruce; Norling, Emma and Hales, David (2009). Towards the evolution of social structure. Computational & Mathematical Organization Theory (CMOT) , 15(2) pp. 78–94.

Edwards, Chris and Hush, Michael (2009). Supporting self-reflection in students learning at a distance. In: Learning in Higher Education - How Style Matters: Proceedings of the 14th Annual Conference of the European Learning Styles Information Network, 17-19 June 2009, Bulle-en-Gruyere, Switzerland.

Elliott, David (2009). Marine renewables: a new innovation frontier. Technology Analysis and Strategic Management, 21(2) pp. 267–275.

Endean, Mark; Swithenby, Stephen and Bai, Bin (2009). Inter-cultural comparisons of staff perceptions on quality in online distance learning. In: Innovation in Learning Communities, 10-13 Jun 2009, Gdansk, Poland.

Eskandarypur, F.; Black, S. and Eckert, C. (2009). The development and positioning of 'the considerate design tool' in the fashion and textile sector. In: Sustainable Innovation 09: Towards a Low Carbon Innovation Revolution, 26-27 October 2009, Farnham, UK.

Ferreira, Giselle and Monk, John (2009). Using drama to introduce ethics to technology students and practitioners. In: 10th Annual Conference of the HEA Subject Centre for ICS, 25-27 Aug 2009, Canterbury.

Fu, Xiaolan; Kaplinsky, Raphael and Zhang, Jing (2009). The impact of China's exports on global manufactures prices. University of Oxford.

Gagg, C. R. and Lewis, P. R. (2009). In-service fatigue failure of engineered products and structures – Case study review. Engineering Failure Analysis, 16(6) pp. 1775–1793.

Giffin, Monica; de Weck, Olivier; Bounova, Gergana; Keller, Rene; Eckert, Claudia and Clarkson, P. John (2009). Change propagation analysis in complex technical systems. Journal of Mechanical Design, 131(8) 081001.

Gladding, Toni (2009). Scoping study of potential health effects of fortnightly residual waste collection and related changes to domestic waste systems. Waste Resources Action Programme.

Griffin, Monica; de Weck, Olivier; Bounova, Gerganga; Keller, Rene; Eckert, Claudia and Clarkson, P. John (2009). Change propagation analysis in complex technical systems. Journal of Mechanical Design, 131(8) 081001.

Haigh, R. D. and Whatmore, R. W. (2009). On the processing conditions and interfacial chemistry of composite PZT thick films on platinised silicon substrates. Sensors and Actuators A: Physical, 151(2) pp. 203–212.

Hales, David; Rahman, Rameez; Zhang, Boxun; Meulpolder, Michel and Pouwelse, Johan (2009). BitTorrent or BitCrunch: evidence of a credit squeeze in BitTorrent? In: 18th IEEE International Workshops on Enabling Technologies: Infrastructures for Collaborative Enterprises, 2009. WETICE '09, 29 June - 01 July 2009, Groningen.

Hanlin, Rebecca (2009). International product development partnerships: innovation for better health? RECIIS (Revista Eletrônica de Comunicação, Informação e Inovação em Saúde), 3(4) pp. 198–208.

Hanlin, Rebecca and Muraguri, Lois (2009). Improving access to health technologies by the poor: the social context in Tanzanian bed net production and delivery. International Journal of Technology Management and Sustainable Development, 8(3) pp. 237–248.

Hanlon, Joseph (2009). Mozambique: The panic and rage of the poor. Review of African Political Economy, 36(119) pp. 125–130.

Hanlon, Joseph (2009). Debt and Development. In: Haslam, Paul; Schafer, Jessica and Beaudet, Paul eds. Introduction to International Development: Approaches, Actors, and Issues. Oxford University Press, pp. 254–270.

Hanlon, Joseph (2009). Mozambique. In: Mehler, A.; Melber, H. and van Walraven, K. eds. Africa Yearbook 2008. Brill, pp. 455–464.

Hanlon, Joseph (2009). Just give money to the poor. In: II Conferencia do IESE “Dinamicas da Pobreza e Padrões de Acumulação em Moçambique”, 22-23 April 2009, Maputo, Mozambique.

Hanlon, Joseph and Mosse, Marcelo (2009). Is Mozambique's elite moving from corruption to development? In: UNU-WIDER Conference on the Role of Elites in Economic Development, 12-13 June 2009, Helsinki, Finland.

Herring, Horace (2009). National building stocks: addressing energy consumption or decarbonization? Building Research & Information, 37(2) pp. 192–195.

Hinchliffe, Stephen; Oreszczyn, Sue and Levidow, Les (2009). Knowledge practices: doing cooperative research with civil society organisations. In: Nordic Environmental Social Sciences (NESS) Conference, 9-12 Jun 2009, London, UK.

Holden, G. (2009). Design at a distance. In: Engineering and Product Design Education Conference, 10-11 September 2009, Brighton, UK.

Holden, Georgina; Schadewitz, Nicole and Zamenopoulos, Theodore (2009). Design education, design research. In: Designs on Elearning, 02-04 Sep 2009, Online.

Hosseinzadeh, F.; Mahmoudi, A. H.; Truman, C. E. and Smith, D. J. (2009). Prediction and measurement of through thickness residual stresses in large quenched components. In: World Congress on Engineering (WCE 2009), 1-3 July 2009, London, U.K..

Hosseinzadeh, F.; Smith, D. J. and Truman, C. E. (2009). Through thickness residual stresses in large rolls and sleeves for metal working industry. Materials Science and Technology, 25(7) pp. 862–873.

Hurrell, P.; Watson, C.; Bouchard, J.; Smith , M.; Dennis , R.; Leggatt, N.; Bate, S. and Warren , A. (2009). Development of weld modelling guidelines in the UK. In: Pressure Vessels and Piping Conference , 26–30 July 2009 , Prague.

Johnson, Hazel and Wilson, Gordon (2009). Learning for Development. Development Matters. London: Zed Books.

Johnson, Hazel and Wilson, Gordon (2009). Learning and mutuality in municipal partnerships and beyond: a focus on northern partners. Habitat International, 33(2) pp. 210–217.

Johnson, Jeffrey; Bourgine, Paul and Hales, David (2009). Complex systems science: expert consultation report. The European Commission, Brussels, Belgium.

Kale, Dinar (2009). International migration, knowledge diffusion and innovation capacities in the Indian pharmaceutical industry. New Technology, Work and Employment, 24(3) pp. 260–276.

Kalpinen, M.S.; Eckert, C.M. and Clarkson, P.J. (2009). Assessing impact analysis practice to improve change management capability. In: International Conference on Engineering Design (ICED'09), 2009, Stanford, CA.

Kaplinsky, Raphael (2009). Environment, inequality, and the internal contradictions of globalization. In: Wilson, Gordon; Furniss, Pamela and Kimbowa, Richard eds. Environment, Development, and Sustainability: Perspectives and cases from around the world. Oxford, UK: Oxford University Press, pp. 149–158.

Kaplinsky, Raphael; Chataway, Jo; Hanlin, Rebecca; Clark, Norman; Kale, Dinar; Muraguri, Lois; Papaioannou, Theo; Robbins, Peter and Wamae, Watu (2009). Below the radar: What does innovation in emerging economies have to offer other low-income economies? International Journal of Technology Management and Sustainable Development, 8(3) pp. 177–197.

Kaplinsky, Raphael (2009). How can Sub-Saharan Africa turn the China-India threat into an opportunity. In: Kremer, Monique; van Lieshout, Peter and Went, Robert eds. Doing Good or Doing Better: Development Policies in a Globalizing World. The Hague: Amsterdam University Press, pp. 279–302.

Kaplinsky, Raphael (2009). Two scientists for every man, woman and dog in America? How sustainable is globalisation? In: Yueh, Linda ed. The Law and Economics of Globalisation: New Challenges for a World in Flux. UK: Edward Elgar Publishing, pp. 279–298.

Kaplinsky, Raphael and Farooki, Masuma (2009). Africa’s cooperation with new and emerging development partners: options for Africa’s development. UN-OSSA.

Kaplinsky, Raphael and Morris, M. (2009). The Asian drivers and SSA: MFA quota removal and the portents for African industrialisation. In: McCormick, Dorothy; Kuzilwa, Joseph A. and Gebre-Egziabher, Tegegne eds. Industrialising Africa in the Era of Globalisation: Challenges to Clothing and Footwear. Nairobi, Kenya: University of Nairobi Press.

Kaplinsky, Raphael and Morris, Mike (2009). Chinese FDI in Sub-Saharan Africa: engaging with large dragons. European Journal of Development Research, 21(4) pp. 551–569.

Kaplinsky, Raphael and Morris, Mike (2009). The Asian drivers and SSA: is there a future for export-oriented African industrialisation? The World Economy, 32(1) pp. 1638–1655.

Kaplinsky, Raphael; Readman, Jeff and Memedovic, Olga (2009). Upgrading strategies in global furniture value chains. United Nations Industrial Development Organization (UNIDO).

Keller, R.; Eckert, C. M. and Clarkson, P. J. (2009). Using an engineering change methodology to support conceptual design. Journal of Engineering Design, 20(6) pp. 1466–1837.

Khan, M. K.; Hainsworth, S. V.; Fitzpatrick, M. E. and Edwards, L. (2009). Application of the work of indentation approach for the characterization of aluminium 2024-T351 and Al cladding by nanoindentation. Journal of Materials Science, 44(4) pp. 1006–1015.

Khan, M. K.; Fitzpatrick, M. E.; Hainsworth, S. V. and Edwards, L. (2009). Effect of tool profile and fatigue loading on the local hardness around scratches in clad and unclad aluminium alloy 2024. Materials Science and Engineering A, 527(1-2) pp. 297–304.

Kilonzo, Susan M. and Mugwagwa, Julius T. (2009). Societal beliefs, scientific technologies and HIV/AIDS in Africa: facing the challenge of integrating local communities in Kenya and Zimbabwe. International Journal of Technology Management and Sustainable Development, 8(3) pp. 249–264.

Koh, E.C.Y.; Keller, R.; Eckert, C. M. and Clarkson, P. J. (2009). Change propagation modelling to support the selection of solutions in incremental change. In: International Conference on Research into Design (ICoRD '09), 7-9 Jan 2009, Bangalore, India.

Koh, E.C.Y.; Keller, R.; Eckert, C.M. and Clarkson, P.J. (2009). Change propagation modelling to support the selection of solutions in incremental change. In: International Conference on Research into Design (ICoRD '09), 2009, Indian Institute of Science, Bangalore, India.

Kowal, J.; Nixon, T.; Aitken, N. and Braithwaite, N. St. J. (2009). Surface activation for low temperature wafer fusion bonding by radicals produced in an oxygen discharge. Sensors and Actuators A: Physical, 155(1) pp. 145–151.

Kube, R.; Bracht, H.; Chroneos, A.; Posselt, M. and Schmidt, B. (2009). Intrinsic and extrinsic diffusion of indium in germanium. Journal of Applied Physics, 106(6)

Lampert, Ben (2009). Diaspora and development? Nigerian organizations in London and the transnational politics of belonging. Global Networks, 9(2) pp. 162–184.

Larminie, James and Martin, Keith (2009). Data acquisition systems: issues of use and interpretation of data. SAE International Paper 2009-01-1673, SAE International, Warrendale, PA. USA.

Laws, Rebecca; Enoch, Marcus; Ison, Stephen and Potter, Stephen (2009). Demand responsive transport: A review of schemes in England and Wales. Journal of Public Transportation, 12(1) pp. 19–37.

Levidow, Les and Carr, Susan (2009). GM food on trial: Testing European democracy. Genomics & Society. New York/London: Routledge.

Levidow, Les (2009). Democratizing agri-biotechnology? European public participation in agbiotech assessment. Comparative Sociology, 8(4) pp. 541–564.

Levidow, Les (2009). Making Europe unsafe for agbiotech. In: Atkinson, Paul; Glasner, Peter and Lock, Margaret eds. The Handbook of Genetics and Society: Mapping the New Genomic Era. Genetics and Society. London: Routledge.

Lewis, Peter R. and Gagg, Colin R. (2009). Failure of an epidural catheter. Engineering Failure Analysis, 16(6) pp. 1805–1815.

Liljedahl, C. D. M.; Brouard, J.; Zanellato, O.; Lin, J.; Tan, M. L.; Ganguly, S.; Irving, P. E.; Fitzpatrick, M. E.; Zhang, X. and Edwards, L. (2009). Weld residual stress effects on fatigue crack growth behaviour of aluminium alloy 2024-T351. International Journal of Fatigue, 31(6) pp. 1081–1088.

Liljedahl, C. D. M.; Fitzpatrick, M. E. and Edwards, L. (2009). Evolution of residual stresses with fatigue crack growth in integral structures with crack retarders. Materials Science and Engineering A, 523(1-2) pp. 152–159.

Lloyd, Peter (2009). Ethical imagination and design. Design Studies, 30(2) pp. 154–168.

Lloyd, Peter and McDonnell, Janet (2009). Special issue: Values in the design process: Editorial. Design Studies, 30(2) pp. 115–118.

Lloyd, Peter (2009). Ethical imagination and design. In: Mcdonnell, Janet and Lloyd, Peter eds. About: Designing - Analysing Design Meetings. Abingdon: Taylor & Francis, pp. 85–100.

Lloyd, Peter and McDonnell, Janet (2009). Introduction to about: designing - analysing design meetings. In: McDonnell, Janet and Lloyd, Peter eds. About: Designing - Analysing Design Meetings. Taylor and Francis Group.

Lyall, Catherine; Papaioannou, Theo and Smith, James (2009). The challenge of policy-making for the new life sciences. In: Lyall, Catherine; Papaioannou, Theo and Smith, James eds. The Limits to Governance: The Challenge of Policy-making for the New Life Sciences. Farnham, UK: Ashgate, pp. 1–17.

Lyall, Catherine; Papaioannou, Theo and Smith, James (2009). Governance in action in the life sciences: Some lessons for policy. In: Lyall, Catherine; Papaioannou, Theo and Smith, James eds. The Limits to Governance: The Challenge of Policy-making for the New Life Sciences. Farnham, UK: Ashgate, pp. 261–273.

Maier, A.M.; Eckert, C.M. and Clarkson, P.J. (2009). Towards managing team-interfaces: an exploratory elicitation of factors influencing communication. In: 17th International Conference on Engineering Design (ICED'09), 2009, Stanford, CA.

Mamou-Mani, Adrien and Sharp, David B. (2009). Investigating the consistency and quality of musical wind instrument manufacturing. In: UK Musical Acoustics Network Summer Meeting: Wind Instrument Acoustics, 12-13 July 2009, University of Edinburgh, UK.

Martin, Keith and Larminie, James. R. J. (2009). Data acquisition systems: A post graduate course aimed at continuing professional development by supported distance learning. In: Motorsports Networking Conference, 24 April 2009, Terre Haute, Indiana, USA.

Martin, Keith and Meechan, Michael (2009). Learning while earning: the key role of supported distance learning in delivering innovative, industry focused courses to up-skill and develop employees in the motor sports sector. In: SAE 2009 World Congress, 19-23 Apr 2009, Detroit, USA.

Martin, Keith and Meechan, Michael (2009). The key role of supported distance learning in delivering innovative, industry focused short courses to up-skill and develop employees in the motorsport sector. In: Business Accelerator 2009, 11 Feb 2009, Gaydon, UK.

McDonnell, Janet and Lloyd, Peter (2009). Special issue: Analysing design conversations: Editorial. CoDesign, 5(1) pp. 1–4.

McKay, Alison; Chase, Scott; Garner, Steven; Jowers, Iestyn; Prats, Miquel; Hogg, David; Hing, Hau Chau; Pennington, Alan de and Earl, Christopher (2009). Design synthesis and shape generation. In: Inns, Tom ed. Designing for the 21st Century: Interdisciplinary Methods and Findings. Farnham: Gower Publishing Limited, pp. 304–321.

Meechan, Michael and Martin , Keith (2009). Learning while earning: the key role of supported distance learning in delivering innovative, industry focused courses to up-skill and develop employees in the motor sports sector. The SAE International Journal of Passenger Cars - Mechanical Systems, 2(1) pp. 539–554.

Moat, R. J.; Hughes, D. J.; Steuwer, A.; Iqbal, N.; Preuss, M.; Bray, S. E. and Rawson, M. (2009). Residual stresses in inertia-friction-welded dissimilar high-strength steels. Metallurgical and Materials Transactions A, 40(9) pp. 2098–2108.

Moat, R. J.; Pinkerton, A. J.; Li, L.; Withers, P. J. and Preuss, M. (2009). Crystallographic texture and microstructure of pulsed diode laser-deposited Waspaloy. Acta Materialia, 57(4) pp. 1220–1229.

Moffatt, J.; Thorpe, M.; Edmunds, R.; Endean, M.; Jones, B.; Reuben, B. and Weidmann, G. (2009). Technology supports distributed team working: the case of the T885 Team Engineering at the Open University. In: ICL2009, 23-25 Sep 2009, Villach, Austria.

Moffatt, J.; Thorpe, M.; Edmunds, R.; Jones, B.; Reuben, B. and Weidmann, G. (2009). Technology supports distributed team working: the case of T885 Team Engineering at the Open University. In: ICL2009 Conference, 23-25 Sep 2009, Villach, Austria.

Mohan, G. (2009). Structural adjustment. In: Kitchin, R. and Thrift, N. eds. International Encyclopedia of Human Geography. Oxford, UK: Elsevier, pp. 1–9.

Mohan, Giles and Power, Marcus (2009). Africa, China and the ‘new’ economic geography of development. Singapore Journal of Tropical Geography, 30(1) pp. 24–28.

Mohan, Giles and Tan-Mullins, May (2009). Chinese migrants in Africa as new agents of development? An analytical framework. European Journal of Development Research, 21(4) pp. 588–605.

Monk, John (2009). Ethics, engineers and drama. Science and Engineering Ethics, 15(1) pp. 111–123.

Mugwagwa, Julius (2009). Collaboration in biotechnology governance: why should African countries worry about those among them that are technologically weak? International Journal of Technology Management and Sustainable Development, 8(3) pp. 265–279.

Mugwagwa, Julius (2009). Ever-changing policy context: the one stable threat to biotech governance in Africa? In: Lyall, Catherine; Papaioannou, Theo and Smith, James R. eds. The Limits to Governance: The Challenge of Policy-Making in the New Life Sciences. Farnham, UK: Ashagate, pp. 171–190.

Mugwagwa, Julius T. and Rutivi, Cathy (2009). Socio-economic impact of GMOs on African consumers. In: Buntzel, Rudolf ed. Genetic Engineering and Food Sovereignty: Reader on Studies and Experiences. Bonn, Germany: Church Development Service (EED), pp. 55–66.

Nadri, Brahim; Smith, Mike C.; Truman, Christopher E.; Smith, David J. and Bouchard, P. John (2009). Statistical analysis of pipe girth weld experimental residual stress data. In: Pressure Vessels and Piping Conference , 26–30 July 2009 , Prague.

Oyelaran-Oyeyinka, Banji and Gehl Sampath, Padmashree (2009). The state and innovation policy in late development: evidence from South Africa and Malaysia. International Journal of Technological Learning, Innovation and Development, 2(3) pp. 173–192.

Papaioannou, Theo (2009). Governance and justice: The challenge of genomics. In: Lyall, Catherine; Papaioannou, Theo and Smith, James eds. The Limits to Governance: The Challenge of Policy-making for the New Life Sciences. Farnham, UK: Ashgate, pp. 21–49.

Papaioannou, Theo; Wield, David and Chataway, Joanna (2009). Knowledge ecologies and ecosystems? An empirically grounded reflection on recent developments in innovation systems theory. Environment and Planning C: Government and Policy, 27(2) pp. 319–339.

Papaioannou, Theo; Yanacopulos, Helen and Aksoy, Zuhre (2009). Global justice: From theory to development action. Journal of International Development, 21(6) pp. 805–818.

Papaioannou, Theo (2009). The impact of new life sciences innovation on political theories of justice. Genomics, Society and Policy, 5(2) pp. 40–52.

Papaioannou, Theo and Rosiello, Alessandro (2009). Bio-clusters as co-evolutionary developments of high tech, venture capital and socio-political institutions: a historical perspective of Cambridge and Scotland. In: ESRC Genomics Network Conference: Mapping the Genomic Era: Measurements and Meanings, 7-9 Oct 2009, Cardiff, UK.

Peake, Stephen and Smith, Joe (2009). Climate Change: From Science to Sustainability. Oxford, UK: Oxford University Press.

Plumbridge, W. J. (2009). New avenues for failure analysis. Engineering Failure Analysis, 16(5) pp. 1347–1354.

Plumbridge, W. J. (2009). Fatigue resistance and structure (30 years on). Fatigue and Fracture of Engineering Materials and Structures, 32(6) pp. 461–463.

Potter, Stephen (2009). Using environmental taxation for transport demand management. In: Lye, Lin-Heng; Milne, Janet E.; Ashiabor, Hope; Deketelaere, Kurt and Kreiser, Larry eds. Critical Issues in Environmental Taxation: International and Comparative Perspectives. Critical Issues in Environmental Taxation, 7 (7). Oxford: Oxford University Press, pp. 39–54.

Pratihar, S.; Turski, M.; Edwards, L. and Bouchard, P. J. (2009). Neutron diffraction residual stress measurements in a 316L stainless steel bead-on-plate weld specimen. International Journal of Pressure Vessels and Piping, 86(1) pp. 13–19.

Prats, Miquel; Lim, Sungwoo; Jowers, Iestyn; Garner, Steve W. and Chase, Scott (2009). Transforming shape in design: observations from studies of sketching. Design Studies, 30(5) pp. 503–520.

Prats, Miquel and Garner, Steven (2009). Making meaning: developing an understanding of form in distance design education. In: DeSForM2009, the 5th international workshop on design & semantics of forms and movement, 26-27 Oct 2009, Taipei, Taiwan.

Rahman, Rameez; Hales, David; Meulpolder, Michel; Heinink, Vincent; Pouwelse, Johan and Sips, Henk (2009). Robust vote sampling in a P2P media distribution system. In: IEEE International Symposium on Parallel & Distributed Processing, 2009. IPDPS 2009, 23-29 May 2009, Rome.

Robbins, Peter (2009). Contextualizing the global development and innovation challenge. In: Innovation Systems for Poverty Reduction and Sustainable Livelihoods Development in SADC Countries, 22-25 June 2009, Namibia.

Robbins, Peter (2009). Regulating agricultural biotechnologies in the context of pblic attitudes. In: RCUK Summer School on Governance and Regulation of Emerging Biotechnologies, 1-12 June 2009, Beijing.

Robbins, Peter (2009). The genesis of synthetic biology: Innovation, interdisciplinarity and the IGEM student competition. In: American Sociological Association Annual Meeting, 8-11 August 2009, San Francisco, CA.

Roberts, Jane (2009). Forget about cheating: what about learning? Worcester Journal of Teaching and Learning, 1

Rossi, Giovanni; Arteconi, Stefano and Hales, David (2009). Evolving networks for social optima in the “weakest link game”. Computational & Mathematical Organization Theory (CMOT) , 15(2) pp. 95–108.

Roy, Robin (2009). Designing for sustainability. In: Wilson, Gordon; Furniss, Pamela and Kimbowa, Richard eds. Environment, Development, and Sustainability: Perspectives and cases from around the world. Oxford, UK: Oxford University Press, pp. 203–212.

Roy, Robin (2009). Achieving the carbon dioxide saving potential of domestic heat pumps in the UK: an evaluation of technical performance and user behaviour. Design Innovation Group, The Open University, Milton Keynes, UK.

Roy, Robin and Caird, Sally (2009). Who adopts microheating technologies? Green Building Magazine, 19(2) pp. 44–47.

Rupasov, D.; Chroneos, A.; Parfitt, D.; Kilner, J. A.; Grimes, R. W.; Istomin, S. Ya. and Antipov, E. V. (2009). Oxygen diffusion in Sr0.75Y0.25CoO2.625: a molecular dynamics study. Physical Review B (Condensed Matter and Material Physics), 79(17) p. 172102.

Schadewitz, Nicole (2009). Design patterns for cross-cultural collaboration. International Journal of Design, 3(3) pp. 37–53.

Schadewitz, Nicole (2009). Innovative collaborative design in international interaction design summer schools. In: Poggenpohl, Sharon and Sato, Keiichi eds. Design Integrations: Research and Collaboration. UK: Intellect, pp. 230–250.

Schadewitz, Nicole and Zakaria , Norhayati (2009). Cross-cultural collaboration Wiki: evolving knowledge about international teamwork. In: 2009 International Workshop on Intercultural Collaboration (IWIC '09), 20-21 Feb 2009, Palo Alto, CA, USA.

Schadewitz, Nicole and Zamenopoulos, Theodore (2009). Towards an online design studio: a study of social networking in design distance learning. In: International Association of Societies of Design Research (IASDR) Conference 2009, 18-22 Oct 2009, Seoul, South Korea.

Sefton, D. E.; Rist, M. A. and Gungor, S. (2009). Rate-dependent deformation of Sn–3.5Ag lead-free solder. Journal of Materials Science: Materials in Electronics, 20(11) pp. 1083–1089.

Shirzadi, A. A.; Abreu, H.; Pocock, L.; Klobčar, D.; Withers, P. J. and Bhadeshia, H. K. D. H. (2009). Bainite orientation in plastically deformed austenite. International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde), 100(1) pp. 40–45.

Shirzadi, A. A.; Bhadeshia, H. K. D. H.; Karlsson, L. and Withers, P. J. (2009). Stainless steel weld metal designed to mitigate residual stresses. Science and Technology of Welding & Joining, 14(6) pp. 559–565.

Šiller, L.; Krishnamurthy, S.; Kjeldgaard, L.; Horrocks, B. R; Chao, Y.; Houlton, A.; Chakraborty, A. K. and Hunt, M. R. C (2009). Core and valence exciton formation in x-ray absorption, x-ray emission and x-ray excited optical luminescence from passivated Si nanocrystals at the Si L2,3 edge. Journal of Physics: Condensed Matter, 21(9)

Smith, Michael .C; Smith, Ann C.; Wimpory, Robert C.; Ohms, Carsten; Nadri, Brahim and Bouchard, P. John (2009). Optimising residual stress measurements and predictions in a welded benchmark specimen: a review of Phase 2 of the NeT Task Group 1 Single Bead on Plate Round Robin. In: Pressure Vessels and Piping Conference , 26–30 July 2009, Prague.

Stavey, M.K.; Eckert, Claudia and Earl, Christopher (2009). From Ronchamp by sledge: on the pragmatics of object references. In: McDonnell, Janet and Lloyd, Peter eds. About designing: analysing design meetings. London: CRC Press, pp. 360–379.

Sutton, Y.; Naidis, G. V.; Johnson, P. C.; Moore, J.; Sharp, D. and Braithwaite, N. St.J (2009). Cylindrical RF discharge with free boundary at atmospheric pressure. In: International Conference on Phenomena in Ionized Gases, 17-19 July 2009, Cancun Mexico.

Thomas, Christine; Lane, Andrew; Oreszczyn, Sue; Schiller, Frank and Yoxon, Mark (2009). Attitudes to the use of organic waste resources to land. Department for Environment, Food and Rural Affairs (Defra).

Thomas, Christine; Lane, Andrew; Oreszczyn, Sue; Schiller, Frank and Yoxon, Mark (2009). Recycling organic waste resources to land – communicating the issues. In: ISWA/APESB 2009 World Congress, Turning Waste into Ideas, 12-15 October 2009, Lisbon, Portugal.

Turski, M. and Edwards, L. (2009). Residual stress measurement of a 316l stainless steel bead-on-plate specimen utilising the contour method. International Journal of Pressure Vessels and Piping, 86(1) pp. 126–131.

Turski, M.; Smith, M. C.; Bouchard, P. J.; Edwards, L. and Withers, P. J. (2009). Spatially resolved materials property data from a uniaxial cross-weld tensile test. Journal of Pressure Vessel Technology, 131(6) pp. 1–7.

Vovk, R.V.; Obolenskii, M. A.; Zavgorodniy, A. A.; Goulatis, I. L. ; Chroneos, A. and Biletskiy, E. V. (2009). Resistive investigation of pseudogap state in non-stoichiometric ReBa2Cu3O7-δ (Re = Y, Ho) single crystals with account for BCS-BEC crossover. Journal of Alloys and Compounds, 485(1-2) L21-L23.

Walker, S. and Cook, M. (2009). The contested concept of sustainable aviation. Sustainable Development, 17(6) pp. 378–390.

Wamae, Watu (2009). Are North-South technological spillovers substantial? A dynamic panel data model estimation. African Journal of Science, Technology, Innovation and Development, 1(1) pp. 136–166.

Wamae, Watu (2009). Enhancing the role of knowledge and innovation for development. International Journal of Technology Management and Sustainable Development, 8(3) pp. 199–220.

Warren, James (2009). Sustainable transport systems: learning from Cuba. In: Wilson, Gordon; Furniss, Pamela and Kimbowa, Richard eds. Environment, Development, and Sustainability: Perspectives and cases from around the world. Oxford, UK: Oxford University Press, pp. 54–64.

Warren, James (2009). Corporate responsibility in practice: building an eco-city from scratch. In: Wilson, Gordon; Furniss, Pamela and Kimbowa, Richard eds. Environment, Development, and Sustainability: Perspectives and cases from around the world. Oxford, UK: Oxford University Press, pp. 213–221.

White, Diana and Fortune, Joyce (2009). The project-specific Formal System Model. International Journal of Managing Projects in Business, 2(1) pp. 36–52.

Wilson, Gordon (2009). The world has problems while universities have disciplines: Universities meeting the challenge of environment through interdisciplinary partnerships. Journal of the World Universities Forum, 2(2) pp. 57–62.

Wilson, Gordon (2009). Making the connections between environment, development, and sustainability. In: Wilson, Gordon; Furniss, Pamela and Kimbowa, Richard eds. Environment, Development, and Sustainability: Perspectives and cases from around the world. Oxford, UK: Oxford University Press, pp. 3–12.

Wilson, Gordon (2009). Conclusion. In: Wilson, Gordon; Furniss, Pamela and Kimbowa, Richard eds. Environment, Development, and Sustainability: Perspectives and cases from around the world. Oxford, UK: Oxford University Press, pp. 274–280.

Wyatt, D.F.; Eckert, C.M. and Clarkson, P.J. (2009). Design of product architectures in incrementally developed complex products. In: International Conference on Engineering Design (ICED'09), 2009, Stanford, CA.

Yanacopulos, Helen (2009). Cutting the diamond: networking economic justice. In: Kahler, Miles ed. Networked Politics: Agency, Power, and Governance. Cornell Studies in Political Economy. Ithaca, New York: Cornell University Press, pp. 67–78.

Zamenopoulos, Theodore (2009). The mathematical conditions of design ability. In: Alexiou, Katerina; Johnson, Jeffrey and Zamenopoulos, Theodore eds. Embracing Complexity in Design. London: Routledge, pp. 95–119.

Zhang, S. Y.; Godfrey, E.; Kockelmann, W.; Paradowska, A.; Bull, M. J.; Korsunsky, A. M.; Abbey, B.; Xu, P.; Tomota, Y.; Liljedahl, D.; Zanellato, O.; Fitzpatrick, M. E.; Daymond, M. R.; Toda, R. M.; Holt, R. A.; Kelleher, J.; Siano, S. and Santisteban, J. (2009). High-tech composites to ancient metals. Materials Today, 12(7-8) pp. 78–84.

Zolghadri, Marc and Eckert, Claudia (2009). Editorial. International Journal of Design Engineering, 2(4) pp. 369–379.

Zolghadri, Marc; Eckert, Claudia; Zouggar, Salah and Girard, Philippe (2009). A taxonomy of collaboration in supply chains. In: International Conference on Engineering Design (ICED'09), 2009, Stanford, CA.

2008

Garner, Steve ed. (2008). Writing on Drawing: Essays on Drawing Practice and Research. Bristol, UK: Intellect.

Horrell, Sara; Johnson, Hazel and Mosley, Paul eds. (2008). Work, Female Empowerment and Economic Development. Routledge Studies in Development Economics. London, UK: Routledge.

Mackintosh, Maureen; Chataway, Joanna and Wuyts, Marc eds. (2008). Promoting Innovation, Productivity and Industrial Growth and Reducing Poverty. Oxon, UK: Routledge.

Aczel, J. C.; Peake, S. R. and Hardy, P. (2008). Designing capacity-building in e-learning expertise: Challenges and strategies. Computers and Education, 50(2) pp. 499–510.

Ahmed, R.; Yu, H. Q.; Stoica, V.; Edwards, L. and Santisteban, J. R. (2008). Neutron diffraction residual strain measurements in post-treated thermal spray cermet coatings. Materials Science and Engineering A, 498(1-2) pp. 191–202.

Alevizou, Panagiota (2008). Authorship, authority and citizenship: discourses of participation in open content communities. In: 51st Annual Conference of the International Association of Media and Communications Researchers, 20-25 July 2008, Stockholm, Sweden.

Alevizou, Panagiota (2008). Analysing mainstream perceptions of online encyclopaedias' legitimacy. In: Media, Communication and Humanity Conference, 21-23 September 2008, London School of Economics and Political Science.

Alexiou, Katerina and Zamenopoulos, Theodore (2008). Design as a social process: a complex systems perspective. Futures, 40(6) pp. 586–595.

Angus, Andrew; Gottberg, Annika; Cook, Matthew and Morris, Joe (2008). Achieving Household Waste Prevention Through Product Service Systems, Technical Report 4: Social and Economic Assessment. Department for Environment, Food and Rural Affairs.

Ayele, Seife (2008). Biotechnology and biodiversity debates and policies in Africa. International Journal of Biotechnology, 10(2-3) pp. 207–223.

Bettley, Alison and Burnley, Stephen (2008). Towards Sustainable Operations Management Integrating Sustainability Management into Operations Management Strategies and Practices. In: Misra, Krishna B. ed. Handbook on Performability Engineering. London, UK: Springer-Verlag, pp. 875–904.

Birkett, Stacey; Lloyd, Peter and Garner, Steven (2008). Graduating product designers and their attitudes to design responsibility: A survey. In: 10th Engineering and Product Design Education Conference (E&PDE '08), 4-5 Sept 2008, Universitat Politecnica de Catalunya, Barcelona, Spain.

Boesting, P.; Keller, R.; Alink, T.; Eckert, C. M.; Albers, A. and Clarkson, P. J. (2008). The relationship between functions and requirements for an improved detection of component linkages. In: Proceedings of the DESIGN 2008, 10th International Design Conference, May 2008, Dubrovnik, Croatia.

Bouchard, P. J. (2008). Code characterisation of weld residual stress levels and the problem of innate scatter. International Journal of Pressure Vessels and Piping, 85(3) pp. 152–165.

Boyle, Godfrey and Bentley, Roger (2008). Global oil depletion: forecasts and methodologies. Environment and Planning B, 35(4) pp. 609–626.

Bracht, Hartmut and Chroneos, Alexander (2008). The vacancy in silicon: a critical evaluation of experimental and theoretical results. Journal of Applied Physics, 104(7)

Bristow, Abigail L.; Enoch, Marcus P.; Zhang, Lian; Greensmith, Clare; James, Norman and Potter, Stephen (2008). Kickstarting growth in bus patronage: Targeting support at the margins. Journal of Transport Geography, 16(6) pp. 408–418.

Burnley, Stephen (2008). Satisfying sustainability skills at a distance. International Journal of Performability Engineering, 4(4) pp. 371–384.

Caird, Sally and Roy, Robin (2008). User-centred improvements to energy efficiency products and renewable energy systems: research on household adoption and use. International Journal of Innovation Management, 12(3) pp. 327–355.

Caird, Sally; Roy, Robin and Herring, Horace (2008). Improving the energy performance of UK households: Results from surveys of consumer adoption and use of low- and zero carbon technologies. Energy Efficiency, 1(2) pp. 149–166.

Chalupnik, M. J.; Wynn, D.; Eckert, C. M. and Clarkson, P. J. (2008). Analysing the relationship between design process composition and robustness to task delays. In: Proceedings of the DESIGN 2008, 10th International Design Conference, May 2008, Dubrovnik, Croatia.

Chalupnik, M. J.; Wynn, D. C.; Eckert, C. M. and Clarkson, P. J. (2008). Investigating design process performance under uncertainty. In: 8th International Symposium on Tools and Methods of Competitive Engineering (TMCE 2008), 21-25 April 2008, Izmir, Turkey.

Chataway, Joanna and Hanlin, Rebecca (2008). Sustainable (vaccine) development: the International AIDS Vaccine Initiative (IAVI) and capacity building. In: Matlin, S.; de Francisco, A.; Sundaram, L.; Falch, H. and Gehner, M. eds. Health Partnerships Review. Geneva: Global Forum for Health Research, pp. 43–46.

Chroneos, A. and Bracht, H. (2008). Concentration of intrinsic defects and self-diffusion in GaSb. Journal of Applied Physics, 104(9)

Chroneos, A.; Bracht, H.; Grimes, R. W. and Uberuaga, B. P. (2008). Vacancy-mediated dopant diffusion activation enthalpies for germanium. Applied Physics Letters, 92(17) p. 172103.

Chroneos, A.; Bracht, H.; Grimes, R. W. and Uberuaga, B. P. (2008). Phosphorous clustering in germanium-rich silicon germanium. Materials Science and Engineering B, 154-55 pp. 72–75.

Chroneos, A.; Bracht, H.; Jiang, C. and Uberuaga, B. P. (2008). Nonlinear stability of E centers in Si1-xGex: electronic structure calculations. Physical Review B, 78(19) p. 195201.

Chroneos, A.; Grimes, R. W.; Bracht, H. and Uberuaga, B. P. (2008). Engineering the free vacancy and active donor concentrations in phosphorus and arsenic double donor-doped germanium. Journal of Applied Physics, 104(11)

Chroneos, A.; Grimes, R. W.; Uberuaga, B. P. and Bracht, H. (2008). Diffusion and defect reactions between donors, C, and vacancies in Ge. II. Atomistic calculations of related complexes. Physical Review B (Condensed Matter and Material Physics), 77(23) p. 235208.

Cook, Matthew and Gottberg, Annika (2008). Achieving Household Waste Prevention Through Product Service Systems, Technical Report 5: Institutional and Policy Review. Department for Environment, Food and Rural Affairs.

Cook, Matthew; Gottberg, Annika; Angus, Andrew; Longhurst, Philip and Morris, Joe (2008). Achieving Household Waste Prevention Through Product Service Systems. Department for Environment, Food and Rural Affairs.

Dewberry, Emma (2008). Can we design sustainable habits of mind? In: Introducing the Affective in Sustainable Design, 08 July 2008, Central St Martins College, University of the Arts London.

Eckert, C. M.; Kerley, W.; Clarkson, P. J. and Moss, M. (2008). Design for service: The new challenge for long-life products. In: 8th International Symposium on Tools and Methods of Competitive Engineering (TMCE 2008), 21-25 April 2008, Izmir, Turkey.

Eckert, Claudia M.; Wynn, David C.; Clarkson, P. John and Black, Sandy (2008). Process simulation to make personalisation economically viable. In: 8th International Symposium on Tools and Methods of Competitive Engineering (TMCE 2008), 21-25 April 2008, Izmir, Turkey.

Edwards, Lyndon; Smith, Mike C.; Turski, Mark; Fitzpatrick, Mike E and Bouchard, P. John (2008). Advances in Residual Stress Modeling and Measurement for the Structural Integrity Assessment of Welded Thermal Power Plant. Advanced Materials Research, 41-42 pp. 391–400.

Endean, Mark; Weidmann, George; Armstrong, David; Moffatt, Jim; Nixon, Tony and Reuben, Bob (2008). Team project work for distance learners in engineering – challenges and benefits. Engineering Education, 3(2) pp. 11–20.

Enoch, Marcus P. and Warren, James P. (2008). Automobile use within selected island states. Transportation Research Part A: Policy and Practice, 42(9) pp. 1208–1219.

Ferguson, Clive; Brodie, Lyn; Endean, Mark; Goodhew, Peter and Palmer, Stuart (2008). An investigation into the adoption of CDIO in distance learning. In: EE2008 International Conference on Innovation, Good Practice and Research in Engineering Education, 12–14 July 2008, Loughborough, UK.

Gabay, Clive (2008). Anarcho-cosmopolitanism: the universalisation of the equal exchange. Global Society, 22(2) pp. 197–216.

Gagg, C. R. and Lewis, P. R. (2008). Service failure of rolling contact bearings - case study review. In: Third International Confrence on Engineering Failure Analysis (ICEFA III), 13-16 July 2008, Sitges, Barcelona, Spain.

Gagg, C. R.; Lewis, P. R. and Tsang, C. (2008). Premature failure of a vacuum pump impeller rotor recovered from a pitch impregnation plant. Engineering Failure Analysis, 15(5) pp. 606–615.

Gagg, Colin. R. and Lewis, Peter. R. (2008). Environmentally assisted product failure – Synopsis and case study compendium. Engineering Failure Analysis, 15(5) pp. 505–520.

Ganguly, S.; Pratihar, S.; Fitzpatrick, M.E. and Edwards, L. (2008). Study of residual stress distribution in a stainless steel bead-on-plate simulation benchmark sample. Materials Science Forum, 571-572 pp. 367–373.

Ganguly, S.; Stelmukh, V.; Fitzpatrick, M. E. and Edwards, L. (2008). Analysis of residual stress in metal-inert-gas-welded Al-2024 using neutron and synchrotron X-ray diffraction. Materials Science and Engineering A, 491(1-2) pp. 248–257.

Ganguly, S.; Turski, M.; Fitzpatrick, M. E.; Edwards, L.; Smith, M. C. and Bouchard, P. J. (2008). Full field measurement of plastic flow properties in a multi-pass austenitic stainless steel weld specimen. In: O'Dowd, N. P. ed. Proceedings of the ASME Pressure Vessels and Piping Conference (PVP2008). ASME, pp. 403–414.

Gasparin, C. P.; Angus, A.; Cook, M.; Peets, A.; Blackburn, D. and Godwin, R. (2008). Measuring farmers’ preference for systems that improve agrochemical traceability. In: 9th Conference on Precision Agriculture, 20-23 Jul 2008.

Gladding, Toni (2008). Waste electrical and electronics equipment: do new regulations promote sustainability? International Journal of Performability Engineering, 4(4) pp. 319–332.

Gottberg, Annika and Cook, Matthew (2008). Achieving Household Waste Prevention Through Product Service Systems, Technical Report 1: Developing an Analytical Framework. Department for Environment, Food and Rural Affairs.

Gottberg, Annika and Cook, Matthew (2008). Achieving Household Waste Prevention Through Product Service Systems, Technical Report 3: Environmental and Waste Prevention assessment. Department for Environment, Food and Rural Affairs.

Gottberg, Annika and Cook, Matthew (2008). Achieving Household Waste Prevention Through Product Service Systems, Technical Report 6: Developing Performance Indicators. Department for Environment, Food and Rural Affairs.

Gottberg, Annika; Cook, Matthew and Longhurst, Philip (2008). Achieving Household Waste Prevention Through Product Service Systems, Technical Report 7: Prospective Case Studies. Department for Environment, Food and Rural Affairs.

Gottberg, Annika; Dewberry, Emma; Maggs, Huw and Cook, Matthew (2008). Achieving Household Waste Prevention Through Product Service Systems, Technical Report 2: Developing Experimental Product Service Systems. Department for Environment, Food and Rural Affairs.

Hales, David and Arteconi, Stefano (2008). Motifs in evolving cooperative networks look like protein structure networks. Networks and Heterogeneous Media , 3(2) pp. 239–249.

Hanlin, Rebecca; Chataway, Joanna; Brusoni, Stefano; Cacciatori, Eugenia and Orsenigo, Luigi (2008). The International AIDS Vaccine Initiative in a Changing Landscape of Vaccine Development: in a Changing Landscape of Vaccine Development (Iavi). In: Mackintosh, Maureen; Chataway, Joanna and Wuyts, Marc eds. Promoting Innovation, Productivity and Industrial Growth and Reducing Poverty. London, UK: Routledge.

Hanlon, Joseph and Smart, Teresa (2008). Do Bicycles Equal Development in Mozambique? Oxford, UK: James Currey.

Hanlon, Joseph and Smart, Teresa (2008). Há mais bicicletas - mas há desenvolvimento? Maputo, Moçambique: Missanga.

Hernandez, Yenny; Nicolosi, Valeria; Lotya, Mustafa; Blighe, Fiona M.; Sun, Zhenyu; De, Sukanta; McGovern, I. T.; Holland, Brendan; Byrne, Michele; Gun'ko, Yurii K.; Boland, John J.; Niraj, Peter; Duesberg, Georg; Krishnamurthy, Satheesh; Goodhue, Robbie; Hutchison, John; Scardaci, Vittirio; Ferrari, Andrea C. and Coleman, Jonathan N. (2008). High-yield production of graphene by liquid-phase exfoliation of graphite. Nature Nanotechnology, 3(9) pp. 563–568.

Hickey, Samuel and Mohan, Giles (2008). The politics of establishing pro-poor accountability: What can poverty reduction strategies achieve? Review of International Political Economy, 15(2) pp. 234–258.

Huzair, Farah (2008). Innovative Potential in Hungarian Agricultural Biotechnology and the Evolution of Networks. Studies in Ethics, Law and Technology, 2(2)

Huzair, Farah and Robbins, Peter (2008). Life Sciences Innovation in Central and Eastern Europe: Conceptual Frameworks and Contributions. Studies in Ethics, Law and Technology, 2(2)

Huzair, Farah (2008). Innovative Capabilities of the Agricultural Biotechnology Sector in Hungary. PhD thesis The Open University.

Ieromonachou, Petros and Warren, James (2008). Policy packages as potential routes to urban road pricing in the UK. European Transport(40) pp. 106–123.

Jamasb, Tooraj; Nuttall, William J. and Pollitt, Michael (2008). The case for a new energy research, development and promotion policy for the UK. Energy Policy, 36(12) pp. 4610–4614.

Johnson, Jeffrey (2008). Science and policy in designing complex futures. Futures, 40(6) pp. 520–536.

Johnson, Jeffrey and Serras, Joan (2008). The multilevel dynamics of very large complex road systems. In: Euproean Conference on Complex Systems (ECCS' 08), 14-19 September 2008, Jerusalem.

Jones, Alan; Nesaratnam, Suresh T. and Porteous, Andrew (2008). A study of episodic waste generating activities for the formulation of sustainable waste management policies. International Journal of Performability Engineering, 4(4) pp. 307–318.

Jowers, I.; Prats, M.; Lim, S.; Mckay, A.; Garner, S. and Chase, S. (2008). Supporting reinterpretation in computer-aided conceptual design. In: Fifth Eurographics Workshop on Sketch-Based Interfaces and Modeling, 11-13th June 2008, Annecy, France.

Jupp, J. R.; Wild, P.; Eckert, C. M. and Clarkson, P. J. (2008). The role of life cycle assessment in product-service design decision making. In: 15th International Conference on Life Cycle Engineering, 17-19 March 2008, Sydney, Australia.

Kale, Dinar and Wield, David (2008). Exploitative and Explorative Learning as a Response to the TRIPS Agreement in Indian Pharmaceutical Firms. Industry & Innovation, 15(1) pp. 93–114.

Kale, Dinar; Wield, David and Chataway, Jo (2008). Diffusion of knowledge through migration of scientific labour in India. Science and Public Policy, 35(6) pp. 417–430.

Kale, Dinar; Wield, David and Chataway, Jo (2008). Diffusion of knowledge through migration of scientific labour in India. In: Kumar, Krishna ed. Reverse Brain Drain: A Reality in Millennium. Human Resources Management. Hyderabad, India: ICFAI publications.

Kaplinsky, R. and Morros, M. (2008). Value chain analysis: a tool for enhancing export supply policies. International Journal of Technological Learning, Innovation and Development, 1(3) pp. 283–308.

Kaplinsky, Raphael and Morris, Mike (2008). L’impatto della Cina sull’Africa sub-sahariana visto attraverso la lente del commercio. Afriche e Orienti: Revista di Studi ai Confini tra Africa Mediterraneo e Medio Oriente(2) pp. 35–48.

Kaplinsky, Raphael (2008). What Does the Rise of China Do for Industrialisation in Sub-Saharan Africa? Review of African Political Economy, 35(115) pp. 7–22.

Kaplinsky, Raphael (2008). Globalisation, inequality and climate change: what difference does China make? Geography Compass, 2(1) pp. 67–78.

Kaplinsky, Raphael and Messner, Dirk (2008). Introduction: the impact of Asian Drivers on the developing world. World Development, 36(2) pp. 197–209.

Kaplinsky, Raphael and Morris, Mike (2008). Do the Asian Drivers undermine the export-oriented industrialisation in SSA? World Development, 36(2) pp. 254–273.

Kaplinsky, Raphael; Readman, Jeff and Memedovic, Olga (2008). Upgrading strategies in global furniture value chains. United Nations Industrial Development Organization, Vienna.

Kartal, M. E.; Liljedahl, C. D. M.; Gungor, S.; Edwards, L. and Fitzpatrick, M. E. (2008). Determination of the profile of the complete residual stress tensor in a VPPA weld using the multi-axial contour method. Acta Materialia, 56(16) pp. 4417–4428.

Keller, R.; Eckert, C. M. and Clarkson, P. J. (2008). Determining component freeze order: a redesign cost perspective using simulated annealing. In: ASME International Design Engineering Technical Conferences (IDETC) and Computers and Information in Engineering Conference (CIE), 3-6 August 2008, New York, USA.

Kerley, W. P.; Wynn, D. C.; Moss, M. A.; Eckert, C. M. and Clarkson, P. J. (2008). Using simulation to support integration of life-cycle engineering activities into an existing design process: A case study. In: Proceedings of the DESIGN 2008, 10th International Design Conference, May 2008, Dubrovnik, Croatia.

King, Sharon M.; Chaure, Shweta; Krishnamurthy, Satheesh; Blau, Werner J.; Colli, Alan and Ferrari, Andrea C. (2008). Optical characterization of oxide encapsulated silicon nanowires of various morphologies. Journal of Nanoscience and Nanotechnology, 8(8) pp. 4202–4206.

Koh, E. C. Y.; Keller, R.; Eckert, C. M. and Clarkson, P. J (2008). Influence of feature change propagation on product attributes in concept selection. In: Proceedings of the DESIGN 2008, 10th International Design Conference, May 2008, Dubrovnik, Croatia.

Krishnamurthy, S.; Donnelly, T.; McEvoy, N.; Blau, W.; Lunney, J. G.; Teh, A. S.; Teo, K. B. K. T. and Milne, W. I. (2008). Growth of carbon nanotubes on Si substrate using Fe catalyst produced by pulsed laser deposition. Journal of Nanoscience and Nanotechnology, 8(11) pp. 5748–5752.

Langlois, Adele (2008). Networked Governance: Bridging the 'Genomics Divide'? In: International Studies Association's 49th Annual Convention, Bridging Multiple Divides, March 26, 2008, San Francisco, USA.

Langlois, Adele (2008). The UNESCO Universal Declaration on Bioethics and Human Rights: Perspectives from Kenya and South Africa. Health Care Analysis, 16(1) pp. 39–51.

Leggatt, N.; Dennis, R. J.; Smith, M. C. and Bouchard, P. J. (2008). Numerical methods for welding simulation - the next technical step. In: ASME 2008 Pressure Vessels and Piping Conference (PVP2008), 27-31 July 2008, Chicago.

Leggatt, N. A.; Dennis, R. J.; Bouchard, P. J. and Smith, M. C. (2008). Numerical methods to predict distortion in welded components. In: ASME 2008 Pressure Vessels and Piping Conference (PVP2008), 27-31 July 2008, Chicago.

Levidow, Les and Boschert, Karin (2008). Coexistence or contradiction? GM crops versus alternative agricultures in Europe. Geoforum, 39(1) pp. 174–190.

Lewis, P. R. and Gagg, C. (2008). Component fatigue on the early railways. In: Third International Conference on Engineering Failure Analysis (ICEFA III), 13-16 July 2008, Sitges, Barcelona, Spain.

Lewis, P. R. and Gagg, C. R. (2008). Failure of Polymeric Medical Products. In: Third International Conference on Engineering Failure Analysis (ICEFA III), 13-16 July 2008, Sitges, Spain.

Liljedahl, C. D. M.; Fitzpatrick, M. E. and Edwards, L. (2008). Distortion and residual stresses in structures reinforced with titanium straps for improved damage tolerance. Materials Science and Engineering A, 486(1-2) pp. 104–111.

Liljedahl, C. D. M.; Fitzpatrick, M. E. and Edwards, L. (2008). Residual stresses in structures reinforced with adhesively bonded straps designed to retard fatigue crack growth. Composite Structures, 86(4) pp. 344–355.

Liljedahl, C. D. M.; Tan, M. L.; Zanellato, O.; Ganguly, S.; Fitzpatrick, M. E. and Edwards, L. (2008). Evolution of residual stresses with fatigue loading and subsequent crack growth in a welded aluminium alloy middle tension specimen. Engineering Fracture Mechanics, 75(13) pp. 3881–3894.

Liljedahl, C. D. M.; Zanellato, O.; Edwards, L. and Fitzpatrick, M. E. (2008). Evolution of Residual Stresses with Fatigue Crack Growth in a Variable Polarity Plasma Arc–Welded Aluminum Alloy Compact Tension Specimen. Metallurgical and Materials Transactions A, 39(10) pp. 2370–2377.

Lim, S.; Chase, S and Garner, S. (2008). Sketching in design: Formalising a transformational process. In: Computer Aided Architectural Design and Research in Asia (CAADRIA'08), 9-12 April 2008, Chiang Mai, Thailand.

Lim, S.; Prats, M.; Chase, S. and Garner, S. (2008). Categorisation of designs according to preference values for shape rules. In: Third International conference on Design, Computing and Cognition (DCC08), 23–25 June 2008, Georgia Institute of Technology, Atlanta, USA.

Lim, Sungwoo; Prats, Miquel; Jowers, Iestyn; Chase, Scott; Garner, Steve and McKay, Alison (2008). Shape exploration in design: formalising and supporting a transformational process. International Journal of Architectural Computing, 6(4) pp. 415–433.

Lloyd, Peter and Van De Poel, Ibo (2008). Designing Games to Teach Ethics. Science and Engineering Ethics, 14(3) pp. 433–447.

Maier, A. M.; Eckert, C. M. and Clarkson, P. J (2008). Development of an audit tool for communication in product development: The communication grid method. In: Academy of Management Annual Meeting, 8-13 Aug 2008, California, USA.

Maier, A. M.; Eckert, C. M. and Clarkson, P. J. (2008). Assessing communication: An enabling technology for more effective R&D management. In: R&D Management Conference, 17-20 June 2008, Ottawa, Canada.

Maier, Anja M.; Kreimeyer, Matthias; Hepperle, Clemens; Eckert, Claudia M.; Lindemann, Udo and Clarkson, P. John (2008). Exploration of Correlations between Factors Influencing Communication in Complex Product Development. Concurrent Engineering, 16(1) pp. 37–59.

Marcozzi, Andrea and Hales, David (2008). Emergent social rationality in a peer-to-peer system. Advances in Complex Systems (ACS) , 11(4) pp. 581–595.

Martin, Keith (2008). Innovative bearings to improve performance and efficiency in industry. International Journal of Performability Engineering, 4(4) pp. 345–356.

Martin, Keith and Meechan, Michael (2008). Learning while earning: an innovative approach to motorsport industry employee education. In: Motor Sport Business Forum, 10-11 Dec 2008, Monaco.

McMillan, Elizabeth (2008). Complexity, Management and the Dynamics of Change: Challenges for Practice. UK: Routledge.

Moat, Richard; Karadge, Mallikarjun; Preuss, Michael; Bray, Simon and Rawson, Martin (2008). Phase transformations across high strength dissimilar steel inertia friction weld. Journal of Materials Processing Technology, 204(1-3) pp. 48–58.

Moffatt, J. E. and Edwards, L. (2008). Effect of frequency on ambient temperature fatigue crack growth in a silicon carbide reinforced silicon nitride composite. International Journal of Fatigue, 30(7) pp. 1289–1297.

Mohan, Giles (2008). Making neoliberal states of development: the Ghanaian diaspora and the politics of homelands. Environment and Planning D: Society and Space, 26(3) pp. 464–479.

Mohan, Giles (2008). China in Africa: A Review Essay. Review of African Political Economy, 35(1) pp. 155–173.

Mohan, Giles (2008). Social Relationships of New Chinese Migrants in Africa. The China Monitor(26) pp. 6–8.

Mohan, Giles (2008). Participatory Development. In: Desai, Vandana and Potter, Robert eds. The Arnold Companion to Development Studies, 2nd Edition. London, UK: Edward Arnold.

Mohan, Giles and Power, Marcus (2008). New African Choices? The Politics of Chinese Engagement. Review of African Political Economy, 35(1) pp. 23–42.

Mohan, Giles and Stokke, Kristian (2008). The politics of localization: from depoliticizing development to politicizing democracy. In: Cox, Kevin; Low, Murray and Robinson, Jennifer eds. The SAGE Handbook of Political Geography. London, UK: Sage Publications, pp. 545–562.

Monk, John (2008). Emotion, engineering and ethics. In: WPE-2008 Workshop on Philosophy and Engineering, 10-12 November 2008, Royal Academy of Engineering, Carlton House Terrace, London.

Monk, John (2008). Technology Games. In: WPE-2008 Workshop on Philosophy and Engineering, 10-12 November 2008, Royal Academy of Engineering, Carlton House Terrace, London.

Monk, John and Ferreira, Giselle (2008). Resources for an experimental course in ethics. In: WPE-2008 Workshop on Philosophy and Engineering, 10-12 November 2008, Royal Academy of Engineering, Carlton House Terrace, London.

Mugwagwa, Julius (2008). Supranational organisations and cross-national policy convergence: the case of biosafety in southern Africa. PhD thesis The Open University.

Muir Wood, A. P; Moultire, J and Eckert, C. M. (2008). Applying trends to design: A theoretical framework. In: Proceedings of the DESIGN 2008, 10th International Design Conference, May 2008, Dubrovnik, Croatia.

Muir Wood, Andrew; Moultrie, James and Eckert, Claudia (2008). Trends and Design: Relating literature to industry practice. In: Proceedings of the Design Research Society Conference 2008, 16-19 July 2008, Sheffield, UK.

Nadri, B.; Bouchard, P. J.; Truman, C. E. and Smith, D. J. (2008). A statistical framework for analysing weld residual stresses for structural integrity assessment. In: ASME 2008 Pressure Vessels and Piping Conference (PVP2008), 27-31 July 2008, Chicago.

Northover, S. M. and Grovenor, C. R. M. (2008). Boundary selectivity of crack paths in corrosion fatigue of stainless steel. In: 15th Electron Backscatter Diffraction Meeting, 31 Mar - 1 Apr 2008, University of Sheffield.

Nuttall, William J. and Manz, Devon L. (2008). A new energy security paradigm for the twenty-first century. Technological Forecasting and Social Change, 75(8) pp. 1247–1259.

Ohms, C.; Martins, R. V.; Uca, O.; Youtsos, A. G.; Bouchard, P. J.; Smith, M. C.; Keavey, M.; Bate, S. K.; Gilles, P.; Wimpory, R. C. and Edwards, L. (2008). The European network on neutron techniques standardization for structural integrity - NET. In: ASME 2008 Pressure Vessels and Piping Conference (PVP2008), 27-31 July 2008, Chicago.

Oreszczyn, Sue and Carr, Susan (2008). Improving the link between policy research and practice: using a scenario workshop as a qualitative research tool in the case of genetically modified crops. Qualitative Research, 8(4) pp. 473–497.

Papaioannou, T.; Antal, D.; Borsi, B.; Bergenholtz, C.; Berndt, T.; Dam, H.; Duras, V.; Dziemianowicz, W.; Filacek, A.; Hochgerner, J.; Katzy, B.; Kedro, M.; Kerdova, M.; Kolenka, B.; Kostka, M.; Lindgren, P.; Loudin, J.; Mensink, W.; Nyiry, A.; Papanek, G.; Pasterz, T.; Readman, J.; Rush, H.; Sedova, M.; Szlachta, J.; Tydlackova, K.; Udvardi, A.; Viszt, E.; Walczyk, K.; Wyrwa, D. and Zaleski, J. (2008). Regional Innovation and Research Policy Outlook: Policy Practices in Eight European Regions. GKI Economic Research Co., Budapest.

Papaioannou, Theo (2008). Nozick Revisited: The Formation of the Right-Based Dimension of his Political Theory. International Political Science Review, 29(3) pp. 261–280.

Papaioannou, Theo (2008). Human Gene Patents and the Question of Liberal Morality. Genomics, Society and Policy, 4(3) pp. 64–83.

Papaioannou, Theo (2008). Technological innovation and liberal theories of justice. In: 58th Political Studies Association Annual Conference: Democracy, Governance and Conflict: Dilemmas of Theory and Practice, 1-3 April 2008, Swansea.

Peltekis, N.; Holland, B. N.; Krishnamurthy, S.; McGovern, I. T.; Poolton, N. R. J.; Patel, S. and McGuinness, C. (2008). Electronic and optical properties of magnesium phthalocyanine (MgPc) solid films studied by soft X-ray excited optical luminescence and X-ray absorption spectroscopies. Journal of the American Chemical Society, 130(39) pp. 13008–13012.

Plumbridge, W. J. (2008). Recent Observations on Tin Pest Formation in Solder Alloys. Journal of Electronic Materials, 37(2) pp. 218–223.

Potter, Stephen and Bailey, Iain (2008). Transport and the Environment. In: Knowles, Richard; Shaw, Jon and Docherty, Iain eds. Transport Geographies. Oxford, UK: Blackwell Publishing, pp. 29–48.

Potter, Stephen (2008). The challenge of sustainable suburbia. In: Universities Transport Study Group Annual Conference, January 2008, Southampton, UK.

Potter, Stephen (2008). Purchase, circulation and fuel taxation. In: Ison, Stephen and Rye, Tom eds. The Implementation and Effectiveness of Transport Demand Management measures: An International Perspective. UK: Ashgate, pp. 13–27.

Prats, M.; Lim, S. and Jowers, I. (2008). Describing shape transformations in design sketches. In: Design Computing and Cognition DCC’08 workshop on Informing computational support for conceptual design: lessons learned from sketching studies, 21 June 2008, Georgia Institute of Technology, Atlanta, GA.

Rahman, M.; Fitzpatrick, M.E.; Edwards, L.; Pratihar, S.; Peel, M.E.; Steuwer, A. and Buslaps, T. (2008). Investigation of the stress fields around a fatigue crack in aluminium alloy 5091. Materials Science Forum, 571-572 pp. 119–124.

Riedel,, Johann; Roy, Robin and Potter, Stephen (2008). Design and market position - mapping the market with the MADRID market map. In: International Product Development Management Conference, 30 Jun - 1 Jul 2008, Hamburg, Germany.

Robbins, Peter; Calvert, Jane and Frow, Emma (2008). Genome engineering futures and the role of the Synthetic Biologist. In: Synthetic Biology 4.0, 10-12 Oct 2008, Hong Kong.

Robbins, Peter and Huzair, Farah (2008). Innovation in Central and Eastern Europe: An Editorial. Studies in Ethics, Law and Technology, 2(2)

Roberts, Carolyn and Roberts, Jane (2008). Starting with the staff: how swapshops can develop ESD and empower practitioners. Environmental Education Research, 14(4) pp. 423–434.

Roberts, Jane and Bakuneeta, Chris (2008). Investigating undergraduate active learning: a pilot study of common pool resource management in Uganda's Queen Elizabeth National Park. In: 12th Biennial Conference of the International Association for the Study of the Commons (IASC), 7-11 Jul 2008, Cheltenham, UK.

Roberts, Joi L.; Schadewitz, Nicole and Adler, Pedro Jorge (2008). STAR framework revisited: Curriculum for user-centered design summer schools. In: Proceedings of Connected 2007, International Conference on Design Education, July 9-12 2007, University of New South Wales, Sydney, Australia.

Roques, Fabien; Newbery, David M. and Nuttall, William J. (2008). Fuel mix diversification incentives in liberalized electricity markets: a Mean–Variance Portfolio theory approach. Energy Economics, 30(4) pp. 1831–1849.

Roy, Robin and Caird, Sally (2008). Design Improvements from users’ experiences of low and zero carbon technologies. International Journal of Performability Engineering, 4(4) pp. 357–370.

Roy, Robin; Caird, Sally and Abelman, Jennie (2008). YIMBY Generation – yes in my back yard! UK householders pioneering microgeneration heat. The Energy Saving Trust, London, UK.

Roy, Robin; Potter, Stephen and Yarrow, Karen (2008). Designing low carbon higher education systems: Environmental impacts of campus and distance learning systems. International Journal of Sustainability in Higher Education, 9(2) pp. 116–130.

Schadewitz, Nicole; Garner, Steve and Ferreira, Giselle (2008). Utilizing FM software in collaborative design-learning. In: HCI 2008 Workshop 'HCI for Technology-Enhanced Learning', 15 Sep 2008, Liverpool.

Schadewitz, Nicole; Garner, Steven and Ferreira, Giselle (2008). Utilising Flash Meeting software in collaborative design-learning. In: HCI for Technology Enhanced Learning, at HCI 2008: Culture, Creativity and Interaction, 1 Sep 2008, Liverpool, UK.

Senker, Peter and Chataway, Joanna (2008). The Myths of Agricultural Biotechnology. In: Burnett, Judith; Senker, Peter and Walker, Kathy eds. The Myths of Technology: Innovation and Inequality. Digital Formations, 46. New York, USA: Peter Lang Publishing Group.

Sharp, David B. (2008). Acoustics by the sea with Coast. In: Spring Conference of the Institute of Acoustics 2008: Widening Horizons in Acoustics, 10-11 April 2008, Reading.

Shirzadi, A. A.; Zhu, Y. and Bhadeshia, H. K. D. H. (2008). Joining ceramics to metals using metallic foam. Materials Science and Engineering: A, 496(1-2) pp. 501–506.

Song, Dong-Ping and Earl, Christopher F. (2008). Optimal empty vehicle repositioning and fleet-sizing for two-depot service systems. European Journal of Operations Research, 185(2) pp. 760–777.

Su, Bin; Hosseinzadeh, Foroogh; Smith, David and Truman, Chris (2008). Residual stresses in a machined and shrink fitted assemblies. In: 8th International Conference on Residual Stresses (ICRS8), 6-8 Aug 2008, Denver, CO, USA.

Sudhakaran, Sudhakaran; Chong, Kok Boon; Barrat, David and Ray, Asim K. (2008). Dielectric response of piezoelectric ceramics at low voltage excitations. Materials Letters, 62(25) pp. 4173–4174.

Thomas, Christine; Schiller, Frank; Yoxon, Mark and Oreszczyn, Sue (2008). Research on attitudes for policy development in organic resource management. In: Waste 2008, 19-21 September 2008, Stratford-upon-Avon, UK.

Turskia, M.; Bouchard, P. J.; Steuwera, A. and Withers, P. J. (2008). Residual stress driven creep cracking in AISI Type 316 stainless steel. Acta Materialia, 56(14) pp. 3598–3612.

Vovk, R.V.; Obolenskii, M. A.; Bondarenko, A. V.; Goulatis, I.L.; Samoilov, A. V.; Chroneos, A. and Pinto Simoes, V.M. (2008). Transport anisotropy and pseudo-gap state in oxygen deficient ReBa2Cu3O7-δ (Re = Y, Ho) single crystals. Journal of Alloys and Compounds , 464(1-2) pp. 58–66.

Vovk, R.V.; Obolenskii, M.A.; Zavgorodniy, A. A.; Bondarenko, A. V.; Goulatis, I. L.; Samoilov, A. V. and Chroneos, A. (2008). Effect of high pressure on the fluctuation conductivity and the charge transfer of YBa2Cu3O7−δ single crystals. Journal of Alloys and Compounds , 453(1-2) pp. 69–74.

Whitehouse, James W. and Sharp, David B. (2008). A psychoacoustical investigation into the effect of wall material on the sound produced by lip-reed instruments. Journal of the Acoustical Society of America, 123(5) p. 3120.

Whitehouse, James W. and Sharp, David B. (2008). A psychoacoustical investigation into the effect of wall material on the sound produced by lip-reed instruments. In: Spring Conference of the Institute of Acoustics 2008: Widening Horizons in Acoustics, 10-11 April 2008, Reading, UK.

Wield, D.V. and Forbes, Naushad (2008). Innovation Dynamics in Catch-Up Firms: Process, Product and Proprietary Capabilities for Development. Industry and Innovation, 15(1) pp. 69–92.

Wield, David (2008). The ESRC Centre for Social and Economic Research on Innovation in Genomics (Innogen). SCRIPTed, 5(3) pp. 600–605.

Wilson, Gordon (2008). Our knowledge ourselves: Engineers (re)thinking technology in development. Journal of International Development, 20(6) pp. 739–750.

Withers, P. J.; Turski, M.; Edwards, L.; Bouchard, P. J. and Buttle, D. J. (2008). Recent advances in residual stress measurement. International Journal of Pressure Vessels and Piping, 85(3) pp. 118–127.

Zanellato, O.; Fitzpatrick, M.E.; Daymond, M.R.; Edwards, L. and Turski, M. (2008). Development of Intergranular Stresses during In-situ Compression Tests in Zircaloy-4. Materials Science Forum, 571-572 pp. 149–154.

2007

Boyle, Godfrey ed. (2007). Renewable electricity and the grid: the challenge of variability. London, UK: Earthscan Publications Ltd.

Chataway, Joanna and James, Wilmot eds. (2007). Biotechnology and Health: South Africa's aspirations in health-related biotechnology. Pretoria, South Africa: Van Schaik.

Elliott, David ed. (2007). Nuclear or not? Does nuclear power have a place in a sustainable energy future? Energy, Climate and the Environment Series. Basingstoke UK: Palgrave Macmillan.

Mytelka, Lynn ed. (2007). Innovation and economic development. London: Edward Elgar.

Oyelaran-Oyeyinka, Banji and McCormick, Dorothy eds. (2007). Industrial clusters and innovation systems in Africa. Tokyo: United Nations University Press.

Roberts, Jane ed. (2007). Environmental Policy. Critical concepts in the environment, 1. Abingdon: Routledge.

Roberts, Jane ed. (2007). Environmental Policy. Critical Concepts in the Environment, 2. Abingdon: Routledge.

Roberts, Jane ed. (2007). Environmental Policy. Critical Concepts in the Environment, 3. Abingdon: Routledge.

Roberts, Jane ed. (2007). Environmental Policy. Critical Concepts in the Environment , 4. Abingdon: Routledge.

Warren, J. P. ed. (2007). Managing transport energy. Power for a Sustainable Future, 3. Cambridge, UK: Oxford University Press, in association with The Open University.

Aczel, James; Peake, Stephen and Hardy, Pascale (2007). What are the Capacity Gaps in e-Learning Expertise? In: Computer Assisted Learning (CAL '07), 26-28 March 2007, Trinity College Dublin, Ireland.

Ahmed, R.; Yu, H.; Stewart, S.; Edwards, L. and Santisteban, J. R. (2007). Residual strain measurements in thermal spray cermet coatings via neutron diffraction. Journal of Tribology, 129(2) pp. 411–418.

Alevizou, Panagiota (2007). Collective intelligence and the cult of open production: critical reflections on theory and methodology. In: Ecrea Digital Culture and Communication Section Workshop: Digital Media: European Perspectives, 1-3 Novemeber 2007, University of Sussex, United Kingdom.

Alevizou, Panagiota (2007). As we think? Collective intelligence, knowledge sharing and encyclopaedias in the digital media age. In: Annual Conference of the International Association of Media and Communications Researchers (IAMCR), 23-25 July 2007, Paris.

Archambault, Éric; Simonetti, Roberto; Côté, Grégoire and Kale, Dinar (2007). The dynamics of pharmaceutical patenting in India: Evidence from USPTO data. Technology Analysis and Strategic Management, 19(5) pp. 625–642.

Ariyo, O. O; Eckert, Claudia and Clarkson, P. J. (2007). Unpleasant surprises in the design of complex products: why do changes propagate? In: Design Engineering Division, ASME and Computers and Information in Engineering Division, ASME eds. Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 2006. New York: American Society of Mechanical Engineers.

Ariyo, O. O.; Eckert, C. M. and Clarkson, P. J. (2007). Prioritising engineering change propagation risk estimates. In: Proceedings of the 16th International Conference on Engineering Design (ICED'07), 28-31 August 2007, Paris, France.

Ariyo, O. O.; Keller, R.; Eckert, C. M. and Clarkson, P. J. (2007). Predicting change propagation on different levels of granularity: an algorithmic view. In: Proceedings of the 16th International Conference on Engineering Design (ICED'07), 28-31 August 2007, Paris, France.

Ayele, Seife (2007). The legitimation of GMO governance in Africa. Science and Public Policy, 34(4) pp. 239–249.

Bhamra, Tracey and Dewberry, Emma (2007). Re-visioning design priorities through sustainability education. In: ICED 16th International Conference on Engineering Design, Design for Society - Innovation, Sustainability, Knowledge, 28-31 Aug 2007, Paris.

Bissell, Chris and Endean, Mark (2007). Meeting the growing demand for engineers and their educators: the potential for open and distance learning. In: Meeting the growing demand for engineers and their educators 2010-2020, 9-11 Nov 2007, Munich, Germany.

Black, Sandy; Eckert, Claudia M. and Delamore, Philip (2007). Developing considerate design: Meeting individual fashion and clothing needs within a framework of sustainability. In: Proceedings of the MCPC 2007 World Conference on Mass Customization and Personalization, 7-12 October 2007, Boston.

Bouchard, P. J. (2007). Characterising weld residual stress for high temperature assessment. In: 3rd Conference on Integrity of High Temperature Welds, 24-26 May 2007, London, UK.

Bouchard, P. J. (2007). Validated residual stress profiles for fracture assessments of stainless steel pipe girth welds. International Journal of Pressure Vessels and Piping, 84(4) pp. 195–222.

Boyle, Godfrey (2007). Renewable Electricity and the Grid: The Challenge of Variability. UK: Earthscan.

Boyle, Godfrey (2007). Non-nuclear sustainable energy futures for Germany and the UK. In: Elliott, David ed. Nuclear or not? Does nuclear power have a place in a sustainable energy future? London, UK: Palgrave Macmillan, pp. 183–196.

Boyle, Godfrey (2007). A Tale of Two Countries: Non-Nuclear Sustainable Energy Futures for the Germany and the UK. In: Elliott, David ed. Nuclear or not? Does nuclear power have a place in a sustainable energy future? Energy, Climate and the Environment. Basingstoke, UK: Palgrave Macmillan, pp. 183–196.

Boyle, Godfrey (2007). Offshore wind: the potential to contribute a quarter of UK electricity by 2024. Wind Engineering, 31(2) pp. 65–74.

Burnley, S.J. (2007). The use of chemical composition data in waste management planning – A case study. Waste Management, 27(3) pp. 327–336.

Burnley, S.J.; Ellis, J.C; Flowerdew, R.; Poll, A.J. and Prosser, H. (2007). Assessing the composition of municipal solid waste in Wales. Resources, Conservation and Recycling, 49(3) pp. 264–283.

Burnley, Stephen J. (2007). A review of municipal solid waste composition in the United Kingdom. Waste Management, 27(10) pp. 1274–1285.

Burnley, Stephen J (2007). The use of virtual reality technology in teaching environmental engineering. Engineering Education, 2(2) pp. 2–15.

Caird, Sally; Herring, Horace and Roy, Robin (2007). Can consumers save energy? Results from surveys of consumer adoption and use of low and zero carbon technologies. In: European Council for an Energy Efficient Economy Summer Study 2007, 4-5 June 2007, La Colle sur Loup, Côte d’Azur, France.

Chalupnik, M. J.; Wynn, D. C.; Eckert, C. M. and Clarkson, P. J. (2007). Understanding design process robustness: a modelling approach. In: Proceedings of the 16th International Conference on Engineering Design (ICED'07), 28-31 August 2007, Paris, France.

Cham, Karen (2007). Reconstruction Theory, Designing the Space of Possibility in Complex Media. International Journal of Performance Arts and Digital Media, 3(2-3) pp. 253–267.

Cham, Karen and Johnson, Jeffrey (2007). Complexity Theory; a Science of Cultural Systems? M/C - A Journal of Media and Culture, 10:(3) pp. 21–34.

Chao, Yimin; Šiller, Lidija; Krishnamurthy, Satheesh; Coxon, Paul R.; Bangert, Ursel; Gass, Mhairi; Kjeldgaard, Lisbeth; Patole, Samson N.; Lie, Lars H.; O'Farrell, Norah; Alsop, Thomas A.; Houlton, Andrew and Horrocks, Benjamin R. (2007). Evaporation and deposition of alkyl-capped silicon nanocrystals in ultrahigh vacuum. Nature Nanotechnology, 2(8) pp. 486–489.

Chataway, Joanna; Brusoni, Stefano; Cacciatori, Eugenia; Hanlin, Rebecca and Orsenigo, Luigi (2007). The International AIDS Vaccine Initiative (IAVI) in a changing landscape of vaccine development: A public/private partnership as knowledge broker and integrator. European Journal of Development Research, 19(1) pp. 100–117.

Chataway, Joanna; Hanlin, Rebecca; Smith, James and Rosiello, Alessandro (2007). Rethinking vaccine R&D in developing countries: Introduction to this issue. International Journal of Technology Management and Sustainable Development, 6(1) pp. 3–7.

Chataway, Joanna; Kale, Dinar and Wield, David (2007). The Indian pharmaceutical industry before and after TRIPS. Technology Analysis and Strategic Management, 19(5) pp. 559–563.

Chataway, Joanna and Smith, James (2007). Participation, communication and innovation: thinking about the International Aids Vaccine Initiative. Institute of Development Studies Bulletin, 38(5) pp. 74–82.

Chataway, Joanna; Tait, Joyce and Wield, David (2007). Frameworks for pharmaceutical innovation in developing countries: the case of Indian pharma. Technology Analysis and Strategic Management, 19(5) pp. 697–708.

Chataway, Jo; Chaturvedi, Kalpana; Hanlin, Rebecca; Mugwagwa, Julius; Smith, James and Wield, David (2007). Building the Case for National Systems of Health Innovation. ESRC Innogen Centre, UK.

Chataway, Jo; Smith, James and Wield, David (2007). Shaping scientific excellence in agricultural research. International Journal of Biotechnology, Vol.9(No.2)

Chataway, Joanna; Brusoni, Stefano; Cacciatori, Eugenia; Hanlin, Rebecca and Orsenigo, Luigi (2007). The International AIDS Vaccine Initiative (IAVI) in a changing landscape of vaccine development: a Public Private Partnership as knowledge broker and integrator. European Journal of Development Research, 19(1) pp. 100–117.

Chataway, Joanna; Chaturvedi, Kalpana; Hanlin, Rebecca; Mugwagwa, Julius; Smith, James and Wield, David (2007). Technological Trends and Opportunities to Combat Diseases of the Poor in Africa: A Background Policy Paper prepared for NEPAD in advance of the AMCOST meeting and the African Union Summit. The New Partnership for Africa's Development (NEPAD), UK.

Chaturvedi, Kalpana; Chataway, Joanna and Wield, David (2007). Policy, markets and knowledge: strategic synergies in Indian pharmaceutical firms. Technology Analysis and Strategic Management, 19(5) pp. 565–588.

Clark, Norman; Mansaray, Patrick; Sheriff, Sima and Suale, David (2007). Research into use Sierra Leone country assessment report. Not Set.

Clark, Norman; Mugabe, John and Smith, James (2007). Biotechnology Policy in Africa. Nairobi: African Centre for Technology Studies.

Clark, Norman; Smith, James and Hirvonen, Maija (2007). Livestock R&D in East and Southern Africa: An innovation systems perspective with special reference to the International Livestock Research Institute. International Journal of Technology Management and Sustainable Development, 6(1) pp. 9–24.

Das, S. S.; Tariq, F.; Rahman, M. I.; Frederiksen, F. B.; Carvalho, E. D. and Prasad, R. (2007). Impact of nonlinear power amplifier on link adaptation algorithm of OFDM systems. In: Vehicular Technology Conference, 2007. VTC-2007 Fall. 2007 IEEE 66th, Sept. 30 2007-Oct. 3 2007, Baltimore, MD.

de Renzio, Paolo and Hanlon, Joseph (2007). Contested sovereignty in Mozambique: The dilemmas of aid dependence. Global Economic Governance Programme, University College, Oxford.

De Weck, Olivier; Eckert, Claudia and Clarkson, P. John (2007). A classification of uncertainty for early product and system design. In: Proceedings of the 16th International Conference on Engineering Design (ICED'07), 28-31 August 2007, Paris, France.

Debarberis, L.; Acosta, B.; Zeman, A.; Pirfo, S.; Moretto, P.; Chernobaeva, A. and Nikolaev, A. (2007). Ductile-to-brittle transition temperature of thermally segregated WWER-1000 base metal. International Journal of Microstructure and Materials Properties, 2(3/4) pp. 326–338.

Donnelly, T.; Krishnamurthy, S.; Carney, K.; McEvoy, N. and Lunney, J. G. (2007). Pulsed laser deposition of nanoparticle films of Au. Applied Surface Science, 254(4) pp. 1303–1306.

Dougan, Sylvia (2007). Zero Carbon at the BRE. Green Building, 17(3)

Eckert, C. M.; Jowers, I. and Clarkson, P. J (2007). Knowledge requirements over long product lifecycles. In: Proceedings of the 16th International Conference on Engineering Design (ICED'07), 28-31 August 2007, Paris, France.

Eckert, C. M.; Keller, R. and Clarkson, P. J. (2007). Avoiding emergency innovation: change prediction in innovative products. In: Proceedings of ERIMA07': International Symposium on Innovative Management Practices, 15-16 March 2007, Biarritz, France.

Eger, T.; Eckert, C. M. and Clarkson, P. J. (2007). Engineering change analysis during ongoing product development. In: Proceedings of the 16th International Conference on Engineering Design (ICED'07), 28-31 August 2007, Paris, France.

Elliott, David ed. (2007). Sustainable Energy: Opportunities and Limitations. Energy, Climate and the Environment. Basingstoke, UK: Palgrave Macmillan.

Faeirs, Adam; Cook, Matt and Neame, Charles (2007). Towards a contemporary approach for understanding consumer behaviour in the context of domestic energy use. Energy Policy, 35(8) pp. 4381–4390.

Faeirs, Adam; Neame, Charles and Cook, Matt (2007). The adoption of domestic solar power systems: do consumers assess product attributes in a stepwise process? Energy Policy, 35(6) pp. 3418–3423.

Flanagan, Tomás; Eckert, Claudia and Clarkson, P. John (2007). Externalizing tacit overview knowledge: A model-based approach to supporting design teams. Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 21(3) pp. 227–242.

Flanagan, Tomas; Eckert, Claudia M. and Clarkson, Clarkson P. (2007). Project structure: an important factor in design planning? In: Proceedings of the 16th International Conference on Engineering Design (ICED'07), 28-31 August 2007, Paris, France.

Flanagan, Tomas; Eckert, Claudia and Clarkson, P. John (2007). Externalising tacit overview knowledge: A model-based approach to supporting design teams. Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 21(3) pp. 227–242.

Flanagana, Tomás; Eckert, Claudia and Clarkson, P. John (2007). Externalizing tacit overview knowledge: A model-based approach to supporting design teams. Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 21(3) pp. 227–242.

Gagg, C. R. and Lewis, P. R. (2007). Counterfeit coin of the realm – Review and case study analysis. Engineering Failure Analysis, 14(6) pp. 1144–1152.

Gagg, Colin. R. and Lewis, Peter. R. (2007). Wear as a product failure mechanism – Overview and case studies. Engineering Failure Analysis, 14(8) pp. 1618–1640.

Garner, Steven (2007). Towards a blended model of product design education. In: Design Education Forum of Southern Africa (DEFSA), 3-5 October, 2007, Cape Town, South Africa.

Gehl Sampath, Padmashree (2007). Intellectual Property Rights and Innovation in a Least Developed Country Context: The Case of Bangladesh. UNCTAD.

Gehl Sampath, Padmashree (2007). Breaking the Fence: Can Patent Rights Deter Biomedical Innovation in 'Technology Followers'? Journal of Technology Assessment and Strategic Management, 19(5) pp. 677–696.

Gehl Sampath, Padmashree and Oyelaran-Oyeyinka, Banji (2007). Innovation in African Development: Case Studies of Uganda, Tanzania and Kenya, A World Bank Study. World Bank.

Gehl Sampath, Padmashree and Oyelaran-Oyeyinka, Banji (2007). Interfacing health care and innovation: Traditional medicinal knowledge in Nigeria. International Journal of Technology Management and Sustainable Development, 6(2) pp. 103–121.

Gehl Sampath, Padmashree (2007). Breaking the fence: can patents deter biomedical innovation in 'Technology Followers'. Journal of Technology Assessment and Strategic Management, 19(5) pp. 1–20.

Giffin, M. L.; De Weck, O. L.; Bounova, G.; Keller, R.; Eckert, C. M. and Clarkson, P. J. (2007). Change propagation analysis in complex technical systems. In: 2007 ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 4-7 September 2007, Las Vegas, USA.

Griffiths, J.; Oliver, E. C.; Fitzpatrick, M. E.; Finlayson, T.; Viano, D. and Wang, Q. (2007). The fracture strength of Si particles in tensile specimens of Sr-modified A356 castings. In: Crepeau, Paul N.; Tiryakioğlu, Murat and Campbell, John eds. Shape Casting: 2nd International Symposium. Warrendale, PA: TMS (The Minerals, Metals and Materials Society), pp. 127–134.

Hainsworth, S. V. and Fitzpatrick, M. E. (2007). Forensic engineering: applying materials and mechanics principles to the investigation of product failures. Forensic Science, Medicine and Pathology, 3(2) pp. 81–92.

Hall, Andy; Clark, Norman and Naik, Guru (2007). Institutional change and innovation capacity: contrasting experiences of promoting small scale irrigation technology in South Asia. International Journal of Technology Management and Sustainable Development, 6(2) pp. 77–101.

Hanlin, Rebecca (2007). Knowledge capacity and sustainable development: The case of South African HIV vaccine development. International Journal of Technology Management and Sustainable Development, 6(1) pp. 55–66.

Hanlin, R.; Chataway, J. and Smith, J. (2007). Global health public-private partnerships: IAVI, partnerships and capacity building. African Journal of Medicine and Medical Science, 36(Suppl) pp. 69–75.

Hanlin, Rebecca (2007). Increasing knowledge flow by linking innovation and health – the case of SAAVI. Genomics, Policy and Society, 2(3) pp. 37–44.

Hanlon, Joseph (2007). Wolfowitz, the World Bank, and illegtimate lending. The Brown Journal of World Affairs, 13(2) pp. 41–54.

Herring, Horace and Roy, Robin (2007). Technological innovation, energy efficient design and the rebound effect. Technovation, 27(4) pp. 194–203.

Hicks, C.; Song, D. P. and Earl, C. F. (2007). Dynamic scheduling for complex engineer-to-order products. International Journal of Production Research, 45(15) pp. 3477–3503.

Hossain, S.; Truman, C. E.; Smith, D. J. and Bouchard, P. J. (2007). Measurement of residual stresses in a nozzle-to-cylinder weld after thermal ageing at 550°C. In: ASME 2007 Pressure Vessels and Piping/CREEP8 Conference, 22-26 July 2007, San Antonio, Texas.

Hosseinzadeh, F.; Truman, C. and Smith, D. (2007). Measurement of residual stresses in large engineering components. In: Experimental Analysis of Nano and Engineering Materials and Structures, Proceedings of the 13 th International Conference on Experimental Mechanics, 01–06 Jul 2007, Alexandroupolis , Greece .

Hosseinzadeh, Foroogh; Truman, Chris and Smith, David (2007). Measurement and mapping of through thickness residual stresses in large steel rolling components. In: 3rd International Steel Conference on New Developments in Metallurgical Process Technologies (METECH), 11-15 Jun 2007, Duesseldorf, Germany.

Hush, Michael (2007). Forensic engineering: a suitable case for investigation? In: 7th International Active Learning in Engineering (ALE) conference, June 4th - 6th 2007, INSA Toulouse, France.

Ieromonachou, Petros; Potter, Stephen and Warren, James (2007). Analysing road pricing implementation processes in the UK and Norway. European Journal of Transport and Infrastructure Research, 7(1) pp. 15–38.

Ieromonachou, Petros; Warren, James and Potter, Stephen (2007). Supporting policy packages: the future of road pricing in the UK. In: Kuhmo Nectar Conference, 9-13 July 2007, Urbino, Italy.

James, Jonathan A. and Edwards, Lyndon (2007). Application of robot kinematics methods to the simulation and control of neutron beam line positioning systems. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 571(3) pp. 709–718.

Johnson, Jeffrey and Iravani, Pejman (2007). The multilevel hypernetwork dynamics of complex systems of robot soccer agents. ACM Transactions on Autonomous and Adaptive Systems, 2(2)

Johnson, Hazel (2007). Communities of practice and international development. Progress in Development Studies, 7(4) pp. 277–290.

Johnson, Hazel and Thomas, Alan (2007). Sustainable development and African local government: can electronic training help build capacities? Compare: A journal of comparative education, 37(4) pp. 447–462.

Johnson, Hazel and Thomas, Alan (2007). Individual learning and building organisational capacity for development. Public Administration and Development, 27(1) pp. 39–48.

Johnson, Jeffrey; Alexiou, Katerina; Creigh-Tyte, Anne; Chase, Scott; Duffy, Alex; Eckert, Claudia; Gascoigne, Damian; Kumar, Bimal; Mitleton-Kelly, Eve; Petry, Michael; Qin, Sheng Fen; Robertson, Alec; Rzevski, George; Teymour, Necdet; Thompson, Avril; Young, Robert; Willis, Mateo and Zamenopoulos, Theodore (2007). Embracing complexity in design. In: Inns, Tom ed. Designing for the 21st Century: Interdisciplinary Questions and Insights. Aldershot: Gower Publishing Limited, pp. 129–149.

Kale, Dinar and Little, Stephen (2007). From imitation to innovation: the evolution of R&D capabilities and learning processes in the Indian pharmaceutical industry. Technology Analysis and Strategic Management, 19(5) pp. 589–609.

Kale, Dinar and Little, Stephen E. (2007). Flows and cohesion: balancing capabilities across an expanded union. Mobilities, 2(1) pp. 99–108.

Kaplinsky, Raphael (2007). The impact of the Asian drivers on innovation and development strategies: lesson from Sub-Saharan Africa experience. International Journal of Technological Learning, Innovation and Development, 1(1) pp. 65–82.

Kaplinsky, Raphael and Morris, Mike (2007). The structure of supply chains and their implications for export supply. AERC - African Economic Research Consortium, Nairobi, Africa.

Kaplinsky, Raphael (2007). The impact of China and India on the developing world. CESifo Forum, 1(2007) pp. 15–21.

Kartal, M.; Molak, R.; Turski, M.; Gungor, S.; Fitzpatrick, M. E. and Edwards, L. (2007). Determination of Weld Metal Mechanical Properties Utilising Novel Tensile Testing Methods. Applied Mechanics and Materials, 7-8 pp. 127–132.

Keller, R.; Eckert, C.M. and Clarkson, P.J (2007). Change Prediction for Mass Customised Products: A Product Model View. In: Proceedings of Mass Customization, 2007, Boston, USA.

Keller, René; Alink, Thomas; Pfeifer, Christian; Eckert, Claudia M.; Clarkson, P. John and Albers, Albert (2007). Product models in design: a combined use of two models to assess change risks. In: Bocquet, J.-C. ed. Proceedings of ICED 2007 (book of abstracts). Glasgow, UK: The Design Society, pp. 673–674.

Kilpinen, M.S.; Eckert, C. M. and Clarkson, P. J. (2007). The emergence of change at the interface of system and embedded software design. In: 5th Conference on Systems Engineering Research (CSER 2007), 14-16 March 2007, Hoboken, NJ, US.

Kilpinen, M.S.; Eckert, C. M. and Clarkson, P. J. (2007). Change propagation at the interface of system and embedded software design: characterising impact analysis task and techniques. In: Proceedings of the 16th International Conference on Engineering Design (ICED'07), 28-31 August 2007, Paris, France.

Lane, Andrew; Oreszczyn, Sue and Carr, Susan (2007). Farmers' understandings of genetically modified crops within local communities. Economic and Social Research Council (ESRC), Swindon, UK.

Lane, Andrew; Oreszczyn, Sue and Carr, Susan (2007). Farmers' understandings of genetically modified crops within local communities. ESRC.

Langlois, Adele (2007). Crossing Places in Bioethics Regulation: Kenya and Beyond. In: Baker, Charlotte and Norridge, Zoë eds. Crossing Places: New Research in African Studies. Newcastle. UK: Cambridge Scholars Publishing, pp. 114–127.

Lawes, S. D. A.; Fitzpatrick, M. E. and Hainsworth, S. V (2007). Evaluation of the tribological properties of DLC for engine applications. Journal of Physics D: Applied Physics, 40(18) pp. 5427–5437.

Levidow, Les (2007). European public participation as risk governance: enhancing democratic accountability for agbiotech policy? East Asian Science, Technology and Society: an International Journal, 1(1) pp. 19–51.

Levidow, Les and Carr, Susan (2007). GM crops on trial: technological development as a real-world experiment. Futures, 39(4) pp. 408–431.

Levidow, Les and Carr, Susan (2007). Europeanising advisory expertise: The role of 'independent, objective and transparent' scientific advice in agri-biotech regulation. Environment and Planning C: Government and Policy, 26(6) pp. 880–895.

Levidow, Les; Murphy, Joseph and Carr, Susan (2007). Recasting “Substantial Equivalence”: Transatlantic Governance of GM Food. Science, Technology and Human Values, 32(1) pp. 26–64.

Liu, X. W. and Plumbridge, W. J. (2007). Damage Produced in Solder Alloys during Thermal Cycling. Journal of Electronic Materials, 36(9) pp. 1111–1120.

Lloyd, Peter (2007). Ethical imagination and design. In: Design Thinking Research Symposium 7: Design Meeting Protocols, 9 - 21 Sept 2007, London, UK.

Lloyd, Peter; McDonnell, Janet and Cross, Nigel (2007). Analysing design behaviour: The design thinking research symposia series. In: Proceedings of 2nd International Association of Design Research Societies (IASDR) Conference, 12-15 Nov 2007, Hong Kong.

Longhurst, Philip; Pollard, Simon and Cook, Matthew (2007). Memorandum by Cranfield University, Centre for Resource Efficiency and Management, written evidence submitted to the House of Lords Science and Technology Sub-Committee Inquiry into Waste Reduction, evidence of 11th December 2007 (presented by S.J.T. Pollard). House of Lords Science and Technology Sub-Committee, London.

Mackintosh, Maureen; Chataway, Joanna and Wuyts, Marc (2007). Promoting innovation, productivity and industrial growth and reducing poverty: bridging the policy gap. Introduction to the Special Issue. European Journal of Development Research, 19(1) pp. 1–12.

Maier, A. M; Kreimeyer, M.; Hepperle, C.; Eckert, C. M. and Clarkson, P. J. (2007). Associations between factors influencing engineering design communication. In: Proceedings of the 16th International Conference on Engineering Design (ICED'07), 28-31 August 2007, Paris, France.

Martin, Keith (2007). Proactive management and control of the performance characteristics of hydrodynamic bearings. In: LUBMAT 2006, International Conference: Lubrication Management and Technology, 14 - 16 June 2006, Preston, U.K..

McMillan, Elizabeth and Carlisle, Ysanne (2007). Strategy as Order Emerging from Chaos: A Public Sector Experience. Long Range Planning, 40(6) pp. 574–593.

Mohan, Giles (2007). Participatory development: from epistemological reversals to active citizenship. Geography Compass, 1(4) pp. 779–796.

Mohan, Giles and Mawdsley, Emma (2007). The war on terror, American hegemony and international development. Review of International Political Economy, 14(3) pp. 439–443.

Mohan, Giles and Yanacopulos, Helen (2007). Governing and democratising technology for development: bridging theory and practice. Science and Public Policy, 34(4) pp. 233–238.

Molak, R. M.; Kartal, M.; Pakiela, Z.; Manaj, W.; Turski, M.; Hiller, S.; Gungor, S.; Edwards, L. and Kurzydlowski, K. J. (2007). Use of micro tensile test samples in determining the remnant life of pressure vessel steels. Applied Mechanics and Materials, 7-8 pp. 187–194.

Molak, R. M.; Kartal, M.; Pakiela, Z.; Manaj, W.; Turski, M.; Hiller, S.; Gungor, S.; Edwards, L. and Kurzydłowski, K. J. (2007). Use of micro tensile test samples in determining the remnant life of pressure vessel steels. Advances in Experimental Mechanics , 7-8 pp. 187–194.

Mulyadi, M.; Rist, M.; Edwards, L.; Brooks, J. W. and Wilson, A. F. (2007). A hot deformation model for two-phase titanium alloys based on an internal state-variable approach. In: Niinomi, M.; Akiyama, S.; Ikeda, M.; Hagiwara, M. and Maruyama, K. eds. Ti-2007 Science and Technology. Sendai, Japan: The Japan Institute of Metals, pp. 315–318.

Nadri, B.; Bouchard, P. J.; Truman, C. E. and Smith, D. J. (2007). Statistical analysis of experimental and numerical weld residual stresses. In: ASME 2007 Pressure Vessels and Piping/CREEP8 Conference, 22-26 July 2007, San Antonio, Texas.

Nicolosi, Valeria; Nellist, Peter D.; Sanvito, Stefano; Cosgriff, Eireann C.; Krishnamurthy, Satheesh; Blau, Werner J.; Green, Malcolm L. H.; Vengust, Damjan; Dvorsek, Damjan; Mihailovic, Dragan; Compagnini, Giuseppe; Sloan, Jeremy; Stolojan, Vlad; Carey, J. David; Pennycook, Stephen J. and Coleman, Jonathan N. (2007). Observation of van der Waals driven self-assembly of MoSI nanowires into a low-symmetry structure using aberration-corrected electron microscopy. Advanced Materials, 19(4) pp. 543–547.

Oyelaran-Oyeyinka, B and Gehl Sampath, Padmashree (2007). Learning Through Inter-Organisational Interactions: Public Research Institutes in the Nigerian Biopharmaceutical System of Innovation. The European Journal of Development Research, 19(1) pp. 174–193.

Oyelaran-Oyeyinka, Banji and Gehl Sampath, Padmashree (2007). Learning through inter-organisational interactions: public research institutes in the Nigerian biopharmaceutical system of innovation. European Journal of Development Research, 19(1) pp. 174–193.

Papaioannou, Theodoros (2007). Policy benchmarking: a tool of democracy or a tool of authoritarianism? Benchmarking: An International Journal, 14(4) pp. 497–516.

Papaioannou, Theo; Wield, David and Chataway, Joanna (2007). Knowledge ecologies and ecosystems? An empirically grounded reflection on recent developments in innovation systems theory. In: The 6th International Triple Helix Conference on University-Government-Industry Relations, 16-18 May 2007, Singapore.

Paterson, Gareth; Garner, Steven and Earl, Christopher (2007). Multimodality through physical digital design. In: International Association of Societies of Design Research, 12-15 Nov 2007, The Hong Kong Polytechnic University.

Peake, Stephen (2007). Carbon trading: opportunities and issues. In: Elliott, David ed. Sustainable Energy: Opportunities and limitations. Energy, Climate and Environment Series. Basingstoke, UK: Palgrave Macmillan, pp. 190–211.

Plumbridge, W. J. (2007). Defects in electronics and their significance for structural integrity. Fatigue and Fracture of Engineering Materials and Structures, 30(5) pp. 432–442.

Plumbridge, W.J. (2007). Tin pest issues in lead-free electronic solders. Journal of Materials Science: Materials in Electronics, 18(1-3) pp. 307–318.

Plumbridge, W.J. (2007). Defects in electronics and their significance for structural integrity. Fatigue and Fracture of Engineering Materials and Structures, 30(5) pp. 432–442.

Plumbridge, W.J. (2007). Tin pest in electronics? Circuit World, 33(1) pp. 9–14.

Potter, Stephen (2007). Exploring approaches towards a sustainable transport system. International Journal of Sustianable Transportation, 1(2) pp. 115–131.

Potter, Stephen (2007). Exploring strategic approaches towards a sustainable transport system. In: International Conference and Annual Meeting of the Chinese Institute of Transportation, 4-6 December 2007, Taipei, Taiwan.

Potter, Stephen (2007). Exploring rail futures using scenarios: experience and potential. In: Proceedings of the Universities Transport Study Group Conference, January 2007, University of Leeds, UK.

Pratihar, S.; Ganguly, S.; James, J. A.; Fitzpatrick, M. E. and Edwards, L. (2007). Non-destructive determination of the 3D residual stress in a AA7050 upper wing skin-stringer panel using neutron diffraction. Journal of Neutron Research, 15(3-4) pp. 293–301.

Robbins, Peter T. (2007). The reflexive engineer: perceptions of integrated development. Journal of International Development, 19(1) pp. 99–110.

Robbins, Peter T. and Crow, Ben (2007). Engineering and development: interrogating concepts and practices. Journal of International Development, 19(1) pp. 75–82.

Robertson, A.; Lycouris, S. and Johnson, J.H. (2007). An approach to the design of interactive environments with reference to choreography, architecture, the complex systems of 4D design. International Journal of Performance Arts and Digital Media, 3(2-3) pp. 281–294.

Rooney, Joseph (2007). William Kingdon Clifford (1845-1879). In: Ceccarelli, Marco ed. Distinguished figures in mechanism and machine science: Their contributions and legacies. History of mechanism and machine science, Volume. Dordrecht, Netherlands: Springer, pp. 79–116.

Roy, Robin and Caird, Sally (2007). Designing low and zero carbon products and systems: improvements based on consumers’ experience of adoption and use. In: International Conference on Engineering Design ICED'07, Design for Society: Knowledge, innovation and sustainability, 28-30 August 2007, Paris, France.

Roy, Robin and Caird, Sally (2007). Climate Change: the citizen's agenda Evidence to Environment, Food and Rural Affairs Committee. The Stationery Office, London, UK.

Roy, Robin; Caird, Sally and Potter, Stephen (2007). People centred eco-design: consumer adoption of low and zero carbon products and systems. In: Murphy, Joseph ed. Governing Technology for Sustainability. London, UK: Earthscan, pp. 41–62.

Schadewitz, N.; Jachna, T. and Santo, Y. (2007). Deep Space. International Journal of Architectural Computing, 5(1) pp. 146–160.

Schadewitz, Nicole and Jachna, Timothy (2007). Introducing New Methodologies for Identifying Design Patterns for Internationalization and Localization. In: International Conference on Human-Computer Interaction (HCII), 22-27 July 2007, Beijing, China.

Schadewitz, Nicole and Jachna, Timothy (2007). Comparing inductive and deductive methodologies for design patterns identification and articulation. In: International Design Research Conference IADSR 2007 Emerging Trends in Design Research, 12-15 November 2007, Hong Kong.

Scott, N. A.; Frizelle, G. and Johnson, J. H. (2007). Insights into lean manufacturing from complex systems measures. International Journal of Agile Manufacturing, 10(2) pp. 125–128.

Sharp, David B. and Li, Aijun (2007). The problem of offset in acoustic pulse reflectometry. In: Proceedings of International Symposium on Musical Acoustics 2007, 9-12 Sept 2007, Barcelona, Spain.

Simonetti, Roberto; Wuyts, Marc and Wuyts-Fivawo, Anna (2007). Banking on rural innovation for poverty reduction: A case study of value-chain lending in Mozambique. European Journal of Development Research, 19(1) pp. 136–155.

Simonetti, Roberto; Wuyts, Marc and Wuyts-Fivawo, Anna (2007). Banking on rural innovation for poverty reduction: a case study of value-chain lending in Mozambique. European Journal of Development Research, 19(1 Special Issue: Research Promoting Innovation, Productivity and Industrial Growth and Reducing Poverty: Bridging the Policy Gap) pp. 136–155.

Slater, R.; Frederickson, J.; Thomas, C.; Wield, D. and Potter, S. (2007). A critical evaluation of partnerships in municipal waste management in England. Resources, Conservation and Recycling, 51(3) pp. 643–664.

Smith, D.; Hosseinzadh, F. and Truman, C. (2007). Measured residual stresses in large steel rolling components. In: Iron & Steel Technology Conference and Exhibition, 07-10 May 2007, Indianapolis, Indiana, USA.

Stacey, M. K.; Eckert, C. M. and Earl, C. (2007). From ronchamp by sledge: on the pragmatics of object references. In: Proceedings of the Seventh Design Thinking Research Symposium (DTRS'07), 19-21 September 2007, London, UK.

Tait, Joyce and Chataway, Joanna (2007). The governance of corporations, technological change, and risk: examining industrial perspectives on the development of genetically modified crops. Environment and Planning C: Government and Policy, 25(1) pp. 21–37.

Tait, Joyce; Wield, David; Bruce, Ann and Chataway, Joanna (2007). OECD International Futures Project on “The Bioeconomy to 2030: Designing a Policy Agenda”. Health Biotechnology to 2030. OECD, Paris, France.

Tan, Jeffrey Meng-Lee; Fitzpatrick, Michael E. and Edwards, Lyndon (2007). Stress intensity factors for through-thickness cracks in a wide plate: Derivation and application to arbitrary weld residual stress fields. Engineering Fracture Mechanics, 74(13) pp. 2030–2054.

Turski, M.; Bouchard, P. J.; Smith, M. C. and Edwards, L. (2007). Spatially resolved materials property data from a cross-weld tensile test. In: ASME 2007 Pressure Vessels and Piping/CREEP8 Conference, 22-26 July 2007, San Antonio, Texas.

Uhure, N. J.; Fitzpatrick, M. E. and Hainsworth, S. V. (2007). Effect of substrate surface roughness on mechanical properties of diamond-like carbon coatings. Tribology - Materials Surfaces and Interfaces, 1(4) pp. 211–223.

Vaughan, Paul; Cook, Matthew and Trawick, Paul (2007). Toward a sociology of reuse: deconstructing the milkbottle. Sociologia Ruralis, 47(2) pp. 120–134.

Whitehouse, James W. and Sharp, David B. (2007). The effect of wall material on the structural vibrations excited and sound produced when lip-reed instruments are blown. In: Proceedings of the International Symposium on Musical Acoustics, 9-12 September 2007, Barcelona, Spain.

Wickstead, Myles (2007). Where to from here? In: Chataway, Joanna and James, Wilmot eds. Biotechnology and Health: South Africa’s Aspirations in Health-Related Biotechnology. Pretoria, South Africa: Van Schaik.

Wierzbanowski, K.; Wroński, S.; Baczmański, A.; Wróbel, M.; Fitzpatrick, M.; Braham, Ch. and Lodini, A. (2007). Variation of residual stresses during cross-rolling. Journal of Neutron Research, 15(3-4) pp. 275–280.

Wild, P.; Jupp, J.; Kerley, W.; Eckert, C. and Clarkson, J (2007). Towards a framework for profiling of products and services. In: Proceedings of the 5th International Conference on Manufacturing Research (ICMR'07), 11-13 Sept 2007, Leicester, UK.

Wilson, Gordon (2007). Knowledge, innovation and re-inventing technical assistance for development. Progress in Development Studies, 7(3) pp. 183–199.

Wilson, Gordon (2007). Beyond the Dichotomies in Technology for Development. Geography Compass, 1(2) pp. 119–135.

Wilson, Gordon and Johnson, Hazel (2007). Knowledge, learning and practice in North-South practitioner-to-practitioner municipal partnerships. Local Government Studies, 33(2) pp. 253–269.

Wynn, D.; Eckert, Claudia and Clarkson, P. J. (2007). Applied signposting: a modeling framework to support design process improvement. In: Design Engineering Division, ASME and Computers and Information in Engineering Division, ASME eds. Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 2006. New York: American Society of Mechanical Engineers.

Wynn, D. C.; Eckert, C. M. and Clarkson, P. J. (2007). Modelling iteration in engineering design. In: Proceedings of the 16th International Conference on Engineering Design (ICED'07), 28-31 August 2007, Paris, France.

Yanacopulos, Helen and Baillie Smith, Matt (2007). The ambivalent cosmopolitanism of international NGOs. In: Bebbington, Anthony J.; Hickey, Sam and Mitlin., Diana C. eds. The challenge of development alternatives: can NGOs make a difference? London: Zed, pp. 298–315.

Zamenopoulos, Theodore and Alexiou, Katerina (2007). Towards an anticipatory view of design. Design Studies, 28(4) pp. 411–436.

Zamenopoulos, Theodore and Alexiou, Katerina (2007). Rethinking the cybernetic basis of design: the concepts of control and organisation. Kybernetes, 36(9/10) pp. 1570–1589.

2006

Hickey, Samuel and Mohan, Giles eds. (2006). Participation - from tyranny to transformation?: Exploring new approaches to participation in development. UK: Zed Books.

Kaplinsky, Raphael ed. (2006). Asian Drivers: Opportunities and Threats. Special Issue IDS Bulletin, 37 (1). UK: Institute for Development Studies.

Rhodes, Ed; Warren, James P. and Carter, Ruth eds. (2006). Supply chains and total product systems: a reader. Padstow, Cornwall, UK: Blackwells.

Yanacopulos, Helen and Hanlon, Joseph eds. (2006). Civil war, civil peace. Oxford, UK: James Currey Publishers.

Abbott, Dina; Brown, Suzanne and Wilson, Gordon (2006). Development management as reflective practice. Journal of International Development, 19(2) pp. 187–203.

Alevizou, Panagiota (2006). Encyclopaedia or cosmopedia? Collective intelligence for knowledge technospaces. In: 2nd Wikimania Conference, 4-6 August 2006, University of Harvard Law School, Cambridge, Massachusetts, USA.

Ariyo, O. O.; Eckert, Claudia and Clarkson, P. J. (2006). On the use of function, behaviour and structural relations as clues for predicting engineering change propagation. In: Marjanovic, Dorian ed. Proceedings of the 9th International Design Conference. Glasgow, UK: The Design Society.

Ayele, Seife (2006). The industry and location impacts of investment incentives on SMEs start-up in Ethiopia. Journal of International Development, 18(1) pp. 1–13.

Ayele, Seife (2006). Enterprise development incentives and state-business relations in Ethiopia. In: Proceedings of the XVth International Conference of Ethiopian Studies in Hamburg, July 20-25, 2003, Hamburg, Germany.

Ayele, Seife (2006). GMO Governance in Africa. Not Set, UK.

Ayele, Seife; Chataway, Joanna and Wield, David (2006). Partnerships in African Crop Biotech. Nature Biotechnology, 24(6) 619 -621.

Barratt, Rod (2006). Performability: pedagogical perspectives. International Journal of Performability Engineering, 2(1) pp. 61–74.

Barratt, Rod S. (2006). Meeting lifelong learning needs by distance teaching: clean technology. Journal of Cleaner Production, 14(9-11) pp. 906–915.

Bouchard, P. J.; Edwards, L.; Youtsos, A. G. and Dennis, R. J. (2006). Development of a residual stress simulation benchmark for a single bead-on-plate benchmark. In: ASME 2006 Pressure Vessels and Piping Conference (PVP2006), 23-27 July 2006, Vancouver, BC, Canada.

Bouchard, P. J. and Withers, P. J. (2006). Identification of residual stress length scales in welds for fracture assessment. In: Youtsos, A. G. ed. Residual stress and its effects on fatigue and fracture: Proceedings of a Special Symposium held within the 16th European Conference on Fracture - ECF16, Alexandroupolis, Greece, Part 4. Springer Netherlands, pp. 163–176.

Boyle, Godfrey and Everett, Robert (2006). Department of Trade and Industry Energy Review Consultation 2006: Submission by Open University Energy & Environment Research Unit. Department of Trade and Industry, London, UK.

Caddell, Martha and Yanacopulos, Helen (2006). Knowing but not knowing: conflict, development and denial. Conflict, Security and Development, 6(4) pp. 557–579.

Caird, Sally (2006). Appendix: GET test 2. In: Mazzarol, Tim ed. Entrepreneurship and innovation: a manager's perspective. Entrepreneurship. Australia: Tilde University Press, pp. 247–266.

Caird, Sally and Roy, Robin (2006). Household ecological footprints - demographics and sustainability. Journal of Environmental Assessment Policy and Management, 8(4) pp. 407–429.

Carlisle, Ysanne and McMillan, Elizabeth (2006). Innovation in organizations from a complex adaptive systems perspective. Emergence: Complexity and Organization, 8(1) pp. 2–9.

Cham, Karen (2006). codea/codeb/codec. Witte De With Centre for Contemporary Art in assoc. with International Film Fesitval Rotterdam, Rotterdam, Netherlands.

Cham, Karen (2006). National grid. Artpolitika, Yekaterinberg, Russia.

Cham, Karen (2006). Aesthetics and Interactive Art. In: CHArt Twenty-Second Annual Conference: Fast forward - Art History, curation and practice after media, 9-10 Nov 2006, London, UK.

Cham, Karen (2006). Stay Cool, Be Positive. Video in the Built Environment, USA.

Cham, Karen (2006). Aesthetics of Interactive Art. In: Fast Forward: Art history, curation and practice after media, 22nd Annual Conference CHArt-Computers and the History of Art Group, 9-10 November 2006, London, UK.

Chataway, Jo; Smith, James and Wield, David (2006). Science and technology partnerships and poverty alleviation in Africa. International Journal of Technology Management and Sustainable Development, 5(2) pp. 103–123.

Chataway, Joanna and Smith, James (2006). The International AIDS Vaccine Initiative (IAVI): Is it getting new science and technology to the world's neglected majority? World Development, 34(1) pp. 16–30.

Chataway, Joanna; Smith, James and Wield, David (2006). Science and technology partnerships for poverty alleviation in Africa. Economic and Social Research Council (ESRC), UK.

Chataway, Joanna; Tait, Joyce and Wield, David (2006). The governance of agro- and pharmaceutical biotechnology innovation: public policy and industrial strategy. Technology Analysis and Strategic Management, 18(2) pp. 169–185.

Chaturvedi, Kalpana and Chataway, Joanna (2006). Strategic integration of knowledge in Indian pharmaceutical firms: creating competencies for innovation. International Journal of Business Innovation and Research, 1(1-2) pp. 27–50.

Chipika, Stephen and Wilson, Gordon (2006). Enabling technological learning among light engineering SMEs in Zimbabwe through networking. Technovation, 26(8) pp. 969–979.

Cook, Guy; Robbins, Peter T. and Pieri, Elisa (2006). 'Words of Mass Destruction': British coverage of the Genetically Modified food debate, expert and non-expert reactions. Public Understanding of Science, 15(1) pp. 5–29.

Cook, M. B.; Bhamra, T. A. and Lemon, M. (2006). Transfer and application of product service systems: from academia to UK manufacturing firms. Journal of Cleaner Production, 14(17) pp. 1455–1465.

Cook, Matthew; Maggs, Huw; Neame, Charles and Lemon, Mark (2006). Service orientated product innovation for improved environmental performance: an exploratory case study of the air conditioning and cooling sector. Environmental Sciences, 3(3) pp. 193–206.

Cree, A. M.; Hainsworth, S. V. and Weidmann, G. W. (2006). Strain-energy method for determining residual stresses in anodised thin films. Transactions of the Institute of Metal Finishing, 84(5) pp. 246–251.

Daymond, M. R. and Bouchard, P. J. (2006). Elastoplastic deformation of 316 stainless steel under tensile loading at elevated temperatures. Metallurgical and Materials Transactions A, 37(6) pp. 1863–1873.

Daymond, M.R. and Fitzpatrick, M.E. (2006). Effect of cyclic plasticity on internal stresses in a metal matrix composite. Metallurgical and Materials Transactions A, 37(6) pp. 1977–1986.

Demaid, A.; Ogden, S. and Zucker, J. (2006). Access Enhancement Objects for data management in Smalltalk. Computer Languages, Systems and Structures, 32(4) pp. 185–202.

Demaid, Adrian and Quintas, Paul (2006). Knowledge across Cultures in the Construction Industry: Sustainability, Innovation & Design. Technovation, 26(5-6) pp. 603–610.

Dewberry, Emma and De Barros, M. Monteiro (2006). Exploring the Need For Different Dialogues In Design. In: WonderGround - 2006 Design Research Society 3rd International Conference, 1-4 November 2006, Sociedade de Geografia de Lisboa, Lisbon, Portugal.

Dewberry, Emma and De Barros, M. Monteiro (2006). Dialogues on Design for Sustainability: Animating different strategies and outputs. In: 11th International Conference - Sustainable Innovation 06: Global challenges, issues and solutions, 23-24 October 2006, Chicago, USA.

Dorn, S.; Whitehouse, J. and Sharp, D. (2006). The effect of wall material on the structural vibrations excited when lip-reed instruments are blown. In: Proceedings of the Institute of Acoustics, 3-4 April 2006, Southampton, UK.

Dougan, Sylvia (2006). Sustainable Construction in a flood of regulation. Building for a Future, 16(1) pp. 56–59.

Dougan, Sylvia (2006). Modernism and Utopianism: Brave new world or just pipe dreams. Building for a Future, 16(3) pp. 56–59.

Dutfield, Graham; Muraguri, Lois and Leverve, Florian (2006). Exploring the flexibilities of TRIPS to promote biotechnology capacity building and appropriate technology transfer. Not Set.

Eckert, Claudia (2006). Generic and specific process models: lessons from modeling the knitwear design process. In: Theory and Methods of Competitive Engineering, April 2006, Ljubljana, Slovenia.

Eckert, Claudia M.; Keller, Rene; Earl, Chris and Clarkson, P. John (2006). Supporting change processes in design: Complexity, prediction and reliability. Reliability Engineering and System Safety, 91(12) pp. 1521–1534.

Edwards, Lyndon (2006). Influence of residual stress redistribution on fatigue crack growth and damage tolerant design. Materials Science Forum, 524-525 pp. 363–372.

Elliott, David (2006). Energy regime choices: nuclear or not? Technology Analysis and Strategic Management, 18(5) pp. 445–450.

Enoch, Marcus; Potter, Stephen; Parkhurst, Graham and Smith, Mark (2006). Why do demand responsive transport systems fail? In: Transportation Research Board 85th Annual Meeting, 22-26 January 2006, Washington DC.

Evans, David; Kaplinsky, Raphael and Robinson, Sherman (2006). Deep and shallow integration in Asia: Towards a holistic account. IDS Bulletin: Asian Drivers Opportunities and Threats, 37(1) pp. 12–22.

Farrahi, G. H.; Majzoobi, G. H.; Hosseinzadeh, F. and Harati, S. M. (2006). Experimental evaluation of the effect of residual stress field on crack growth behaviour in CT specimen. Engineering Fracture Mechanics, 73(13) 1772-1782 .

Ferrie, Emilie; Buffiere, Jean-Yves; Ludwig, Wolfgang; Gravouil, Anthony and Edwards, Lyndon (2006). Fatigue crack propagation: In situ visualization using X-ray microtomography and 3D simulation using the extended finite element method. Acta Materialia, 54(4) pp. 1111–1122.

Fitzpatrick, M.E. (2006). Internal stress development during fatigue cycling of high-strength Al/SiC metal matrix composites. Materials Science Forum, 524-525 pp. 769–774.

Flanagan, T. L.; Eckert, Claudia; Clarkson, P. J. and Keller, R. (2006). Overview: the link between project plans and industrial reality. In: Theory and Methods of Competitive Engineering, April 2006, Ljubljana, Slovenia.

Forbes, Barbara J.; Pike, E. Roy; Sharp, David B. and Aktosun, Tuncay (2006). Inverse potential scattering in duct acoustics. Journal of the Acoustical Society of America, 119(1) pp. 65–73.

Fortune, Joyce and White, Diana (2006). Framing of project critical success factors by a systems model. International Journal of Project Management, 24(1) pp. 53–65.

Gagg, C. and Harris, D. (2006). Current status of staged road traffic accidents within the UK - case study analysis. In: Second International Conference on Engineering Failure Analysis (ICEFA II), 12-15 Sept 2006, Toronto, Canada.

Ganguly, S.; Fitzpatrick, M.E. and Edwards, L. (2006). Use of neutron and synchrotron X-ray diffraction for evaluation of residual stresses in a 2024-T351 Aluminum Alloy Variable-Polarity Plasma-Arc weld. Metallurgical and Materials Transactions A, 37(2) pp. 411–420.

Garner, Steven (2006). Industrial design. Microsoft.

Garner, Steven (2006). Ergonomics. Microsoft.

Garner, Steven (2006). Design. Microsoft.

Gehl Sampath, Padmashree (2006). India’s product patent regime: Less or more of “Pills for the Poor". Journal of World Intellectual Property, 9(6) pp. 694–726.

Gehl Sampath, Padmashree (2006). India's Product Patent Protection Regime: Less or More of 'Pills for the Poor'? Journal of World Intellectual Property, 9(6) pp. 694–726.

Gillott, John (2006). Human Rights, Privacy and Medical Research; Analysing UK Policy on Tissue and Data. Genetic Interest Group, London.

Gottberg, A.; Cook, M.; Morris, J.; Angus , A. and Longhurst, P. (2006). Satisfying household demand using services instead of material products to achieve household waste prevention. In: Waste 2006: Sustainable Waste and Resource Management, 19-21 Sept 2006, Warwick, UK.

Gottberg, Annika; Morris, Joe; Pollard, Simon; Mark-Herbert, Cecilia and Cook, Matthew (2006). Producer responsibility, waste minimisation and the WEEE Directive: case studies in eco-design from the European lighting sector. Science of the Total Environment, 359 pp. 38–56.

Hanlon, Joe and Fox, Sean (2006). Identifying Fraud in Democratic Elections: a case study of the 2004 Presidential Elections in Mozambique. Crisis States Research Centre, London School of Economics, London, UK.

Hanlon, Joseph (2006). 'Illegitimate' loans: lenders, not borrowers, are responsible. Third World Quarterly, 27(2) pp. 211–226.

Hanlon, Joseph (2006). Defining 'illegitimate debt': when creditors should be liable for improper loans. In: Jochnick, Chris and Preston, Fraser A. eds. Sovereign debt at the crossroads: challenges and proposals for resolving the third world debt crisis. Oxford, UK: Oxford University Press, pp. 109–130.

Hicks, Christian; Song, Dong-Ping and Earl, Christopher F. (2006). An ordinal optimization based evolution strategy to schedule complex make-to-order products. International Journal of Production Research, 44(22) pp. 4877–4895.

Hossain, S.; Truman, C. E.; Smith, D. J. and Bouchard, P. J. (2006). Measurement of residual stresses in a type 316H stainless steel offset repair in a pipe girth weld. Journal of Pressure Vessel Technology, 128(3) pp. 420–426.

Huzair, Farah (2006). The regulation of agricultural biotechnology in Poland and the obstacles to EU compliance. IKD, Milton Keynes, UK.

Ieromonachou, P.; Potter, S. and Warren, J.P. (2006). Norway's urban toll rings: evolving towards congestion charging? Transport Policy, 13(5) pp. 367–378.

Ieromonachou, P.; Potter, S. and Warren, J.P. (2006). Evaluation of the implementation process of urban road pricing schemes in the United Kingdom and Italy. European Transport, 32 pp. 49–68.

Iravani, Pejman (2006). Discovering relevant sensor data by Q-analysis. In: Bredenfeld, A.; Jacoff, A.; Noda, I. and Takahashi, Y. eds. RoboCup 2005: Robot Soccer World Cup IX. Berlin: Springer, pp. 81–92.

Jarratt, T.; Eckert, C. and Clarkson, P. J. (2006). Pitfalls of engineering change: change practice during complex product design. In: ElMaraghy, Hoda A. and ElMaraghy, Waguih H. eds. Advances in Design. Springer Series in Advanced Manufacturing. London: pringer, pp. 413–423.

Jazaeri, H.; Humphreys, F. John and Bate , Pete S. (2006). Static and dynamic grain growth in single-phase aluminium. Materials Science Forum, 519 pp. 153–160.

Johnson, Hazel and Wilson, Gordon (2006). Connecting people and places: spaces for thinking, learning, knowledge and action. Journal of International Development, 18(6) pp. 747–755.

Johnson, J. H. (2006). Can complexity help us better understand risk? Risk Management, 8(4) pp. 227–267.

Johnson, Hazel and Wilson, Gordon (2006). North-South/South-North partnerships: closing the 'mutuality gap'. Public Administration and Development, 26(1) pp. 71–80.

Johnson, Jeffrey (2006). Hypernetworks for reconstructing the dynamics of multilevel systems. In: European Conference on Complex Systems 2006, 25-29 September 2006, Oxford.

Kale, Dinar and Little, Stephen (2006). Knowledge generation in developing countries. In: Janardhan, Rao N. ed. Knowledge Based Economy - Country Perspectives. Economy. Hyderabad, India: ICFAI Publications.

Kaplinsky, R.; Grantham, A.; Mynors, D.; Mohamed, S.; Walsh, K.; Coles, R. and Chan, P. (2006). Towards A Taxonomy of Knowledge Leakage: Literature and Framework. In: British Academy of Management Annual Conference: BAM 2006: building international communities through collaboration, 12-14 September 2006, Belfast, UK.

Kaplinsky, Raphael (2006). Revisiting the revisited terms of trade: will China make a difference? World Development, 34(6) pp. 981–995.

Kaplinsky, Raphael (2006). China and the global terms of trade. IDS Bulletin: Asian Drivers Opportunities and Threats, 37(1) pp. 43–53.

Kaplinsky, Raphael (2006). How can agricultural commodity producers appropriate a greater share of value chain incomes? In: Sarris, Alexander and Hallam, David eds. Agricultural Commodity Markets and Trade: New Approaches to Analyzing Market Structure and Instability. Cheltenham, UK: Edward Elgar and the Food and Agriculture Organization of the United Nations.

Kaplinsky, Raphael (2006). Winners and losers: China's trade threats and opportunities for Africa. In: Wild, L. and Mepham, D. eds. The New Sinosphere: China in Africa. London: Institute of Public Policy Research.

Kaplinsky, Raphael and Santos-Paulino, Amelia U. (2006). A disaggregated analysis of EU imports: the implications for the study of patterns of trade and technology. Cambridge Journal of Economics, 30(4) pp. 587–611.

Kaplinsky, Raphael and Morris, Mike (2006). Dangling by a thread: how sharp are the Chinese scissors? Institute of Development Studies.

Kartal, M.; Turski, M.; Johnson, G.; Fitzpatrick, M.E.; Gungor, S.; Withers, P.J. and Edwards, L. (2006). Residual stress measurements in single and multi-pass groove weld specimens using neutron diffraction and the contour method. Materials Science Forum, 524-525 pp. 671–676.

Keller, R; Eger, T; Eckert, Claudia and Clarkson, P.J. (2006). Matrices or network diagrams: which visual representation is better for visualising connectivity models? Information Visualization, 5(1) pp. 62–76.

Keller, R.; Eckert, Claudia and Clarkson, P. J. (2006). Heuristics for change prediction. In: Marjanovic, Dorian ed. Proceedings of the 9th International Design Conference. Glasgow, UK: The Design Society.

Keller, René; Eckert, Claudia and Clarkson, P John (2006). Matrices or node-link diagrams: which visual representation is better for visualising connectivity models? Information Visualization, 5(1) pp. 62–76.

Keller, René; Eckert, Claudia and Clarkson, P. John (2006). Building connectivity models in design: representations and tools to support cognitive preferences. In: Gero, John S. ed. Design Computing and Cognition '06. Springer, pp. 41–60.

Keller, René; Eckert, Claudia M. and Clarkson, John P. (2006). Matrices or node-link diagrams: which visual representation is better for visualising connectivity models? Information Visualization, 5(1) pp. 62–76.

Kilpinen, M. S.; Clarkson, P. J. and Eckert, Claudia (2006). Change impact analysis at the interface of the system design and embedded software disciplines. In: Marjanovic, Dorian ed. Proceedings of the 9th International Design Conference. Glasgow, UK: The Design Society.

Krishnamurthy, S.; McGuinness, C.; Dorneles, L. S.; Venkatesan, M.; Coey, J. M. D.; Lunney, J. G.; Patterson, C. H.; Smith, K. E.; Learmonth, T.; Glans, P. -A.; Schmitt, T. and Guo, J. -H. (2006). Soft-x-ray spectroscopic investigation of ferromagnetic Co-doped ZnO. Journal of Applied Physics, 99(8)

Kruger, Corinne and Cross, Nigel (2006). Solution driven versus problem driven design: strategies and outcomes. Design Studies, 27(5) pp. 527–548.

Lane, Ben and Potter, Stephen (2006). The adoption of cleaner vehicles in the UK: exploring the consumer attitude–action gap. Journal of Cleaner Production, 15(11-12) pp. 1085–1092.

Langlois, Adele (2006). The Governance of Genomic Information: Will It Come of Age? Genomics, Society and Policy, 2(3) pp. 49–63.

Lee, K. S.; Moreton, D. N.; Bouchard, P. J. and Moffat, D. G. (2006). The post-yield behaviour of an internally pressurised cylinder having a pad attachment. Strain, 42(4) pp. 305–314.

Levidow, Les (2006). The transatlantic agbiotech conflict: a policy problem and opportunity for EU regulatory policies. In: Falkner, Robert ed. The International politics of genetically modified food: diplomacy, trade and law. London: Palgrave, pp. 118–137.

Lewis, P. R and Gagg, C. R. (2006). Failure of a Nylon Bridge Bearing. In: ANTEC 2006 Plastics: 64th Annual Technical Conference Proceedings, May 2006, Charlotte, NC, USA.

Lewis, P. R. and Gagg, C. R. (2006). Post-graduate Forensic Engineering at The Open University. In: Proceedings of the International Conference on Innovation, Good Practice and Research in Engineering Education, 24-26 July 2006, University of Liverpool, UK.

Lewis, P. R. and Fitzpatrick, M. E. (2006). Intellectual Property Topics in Open University Distance-Taught Courses. In: Doyle, S. and Mannis, A. eds. Proceedings of the International Conference on Innovation, Good Practice and Research in Engineering Education 2006. UK: Higher Education Academy, pp. 507–511.

Lillis, Theresa and North, Sarah (2006). Academic writing. In: Potter, Stephen ed. Doing postgraduate research (2nd ed). Open University series. London: Sage, pp. 114–151.

Maier, Anja M.; Eckert, Claudia M. and Clarkson, P. John (2006). Identifying requirements for communication support: A maturity grid-inspired approach. Expert Systems with Applications, 31(4) pp. 663–672.

Mann, Phebe and Garner, Steven (2006). The Role of Sketches in Supporting Near-Synchronous Remote Communication in Computer Supported Collaborative Design. In: Shen, Weiming; Chao, Kuo-Ming; Lin, Zongkai; Barthes, Jean-Paul A and James, Anne eds. Computer Supported Cooperative Work in Design II: 9th International Conference. Lecture Notes in Computer Science, 3865 (3865). Heidelberg: Springer, pp. 72–81.

Martin, J. K. (2006). Design guidelines for hydrostatic journal bearings. Industrial Lubrication and Tribology, 58(2-3) pp. 135–139.

Martin, Keith (2006). Observations of USA further and higher education provision in motorsport engineering and management. In: Motorsport Educators Forum, 7th March, 2006, Stoneleigh, UK.

Mohan, Giles (2006). Embedded cosmopolitanism and the politics of obligation: the Ghanaian diaspora and development. Environment and Planning A, 38(5) pp. 867–883.

Mohan, Giles (2006). Beyond participation: strategies for deeper empowerment. In: Cooke, Bill and Kothari, Uma eds. Participation: The New Tyranny? London: Zed Books, pp. 153–167.

Morris, Dick; Oreszczyn, Sue; Blackmore, Christine; Ison, Raymond and Martin, Stephen (2006). A Systemic approach to scoping of factors influencing more sustainable land use in Herefordshire. Local Environment, 11(6) pp. 683–699.

Mulyadi, M.; Rist, M.A.; Edwards, L. and Brooks, J.W. (2006). Parameter optimisation in constitutive equations for hot forging. Journal of Materials Processing Technology, 177(1-3) pp. 311–314.

Muraguri, Lois (2006). A discussion paper on IP rights in public research in Agriculture: management issues. International Crop Research Institute for Semi-Arid Tropics (ICRISAT).

Muraguri, Lois (2006). Private rights and Public goods: conflicts in agriculture R&D. In: DIME conference on Intellectual Property Rights for Business and Society, 14-15 September 2006, University of London.

Murphy, Joseph and Levidow, Les (2006). Governing the Transatlantic conflict over agricultural biotechnology: contending coalitions, trade liberalisation and standard-setting. Genetics and Society. London, UK: Routledge.

Murphy, Joseph; Levidow, Les and Carr, Susan (2006). Regulatory standards for environmental risks: understanding the US-European Union conflict over Genetically Modified Crops. Social Studies of Science, 36(1) pp. 133–160.

Mytelka, Lynn K. (2006). Pathways and policies to (Bio) pharmaceutical innovation systems in developing countries. Industry and Innovation, 13(4) pp. 415–435.

Mytelka, Lynn K. (2006). Divides and rules:the impact of new wave technologies on learning and innovation in the south. Journal of International Development, 18(6) pp. 861–876.

Nemes, Gustav; High, Chris and Huzair, Farah (2006). Reflexive agency and multi-level governance: mediating integrated rural development in South Transdanubia. In: Cheshire, L.; Higgins, V. and Lawrence, G. eds. Rural Governance: International perspectives. Routledge Studies in Human Geography. London, UK: Routledge, pp. 98–115.

Oates, John (2006). Ethical frameworks for research with human participants. In: Potter, Stephen ed. Doing postgraduate research. London: Sage, pp. 200–227.

Oreszczyn, S. and Lane, A.B. (2006). Farmer communities of practice and high-tech futures. In: Plymouth Rural Futures Conference: The Rural citizen: governance, culture and wellbeing in the 21st Century, 5-7 April 2006, Plymouth, UK.

Oreszczyn, Sue and Lane, Andrew (2006). Farmer communities of practice and high tech futures. In: The Rural Citizen: Governance, Culture and Wellbeing in the 21st Century, 5-7 Apr 2006, Plymouth, UK.

Organ, S.J.; Li, J.; Terry, A. E. and Barham, P. J. (2006). Morphology and growth of a hydroxybutyrate oligomer with 24 repeat units. Polymer, 47(15) pp. 5513–5522.

Outram, S. M. and Ellison, G. T. H (2006). Improving the use of race and ethnicity in genetic research: a survey of instructions to authors in genetics journals. Science Editor, 29(3) pp. 78–81.

Oyelaran-Oyeyinka, Banji (2006). Learning to compete in African industry: institutions and technology in development. Aldershot, UK: Ashgate.

Oyelaran-Oyeyinka, Banji and Lal, Kaushalesh (2006). SMEs and New Technologies: Learning E-Business and Development. Palgrave Macmillan.

Papaioannou, Theodoros (2006). Towards a critique of the moral foundations of intellectual property rights [1]. Journal of Global Ethics, 2(1) pp. 67–90.

Papaioannou, Theodoros; Rush, Howard and Bessant, John (2006). Benchmarking as a policy-making tool: from the Private Sector to the Public Sector. Science and Public Policy, 33(2) pp. 91–102.

Paterson, Gareth and Garner, Steven (2006). On making: issues of 3D representations in design education. In: Engineering and Product Design Education Conference, 07-08 September 2006, Salzburg.

Plater, S. and Boyle, G. (2006). Germany: Is PV going where the sunshine and money are? In: Proceedings of 21st European Photovoltaics Conference, 4-8 September, Dresden, Germany.

Plumbridge, W.J. (2006). Implementing lead-free solders - the performance aspects. Soldering and Surface Mount Technology, 18(1) pp. 11–18.

Potter, Stephen; Enoch, Marcus; Rye, Tom; Black, Colin and Ubbels, Barry (2006). Tax treatment of employer commuting support: an international review. Transport Reviews, 26(2) pp. 221–237.

Pratihar, S.; Stelmukh, V.; Hutchings, M.T.; Fitzpatrick, M.E.; Stuhr, U. and Edwards, L. (2006). Measurement of the residual stress field in MIG-welded Al-2024 and Al-7150 aluminium alloy compact tension specimens. Materials Science and Engineering A, 437(1) pp. 46–53.

Prats, Miquel and Garner, Steve (2006). Observations on ambiguity in design sketches. Tracey: the online journal of contemporary drawing research

Prats, M.; Earl, C.; Garner, S. and Jowers, I. (2006). Shape exploration of designs in a style: Toward generation of product designs. AI EDAM - Artificial Intelligence in Engineering Design and Manufacture, 20(3) pp. 201–215.

Prats, Miquel and Earl, C.F. (2006). Exploration through drawings in the conceptual stages of product design. In: Gero, J. ed. Design Computing and Cognition. Springer, pp. 83–102.

Rhodes, Edward (2006). From Supply Chains to Total Product Systems. In: Rhodes, Edward; Warren, James P. and Carter, Ruth eds. Supply Chains and Total Product Systems: A Reader. Oxford, UK: Blackwell Publishing, pp. 8–35.

Rist, M.A.; Tin, S.; Roder, B.A.; James, J.A. and Daymond, M.R. (2006). Residual stresses in a quenched superalloy turbine disc: measurements and modeling. Metallurgical and Materials Transactions A, 37(2) pp. 459–467.

Rist, Martin A.; Plumbridge, W.J. and Cooper, S. (2006). Creep-constitutive behavior of Sn-3.8Ag-0.7Cu solder using an internal stress approach. Journal of Electronic Materials, 35(5) pp. 1050–1058.

Rooney, Joe (2006). Geometric configuration in robot kinematic design. In: Zielinska, Teresa and Zielinski, Cezary eds. ROMANSY 16: robot design, dynamics and control. CISM International Centre for Mechanical Sciences (487). Springer, pp. 55–62.

Roy, Robin and Caird, Sally (2006). Designing low and zero carbon products and systems – adoption, effective use and innovation. In: Sustainable Innovation 06: 11th International Conference, 23-24 Oct 2006, Chicago, USA.

Santisteban, J. R.; Fernandez, L.; Corsco, H.; Martinez, R. L.; Boccanera, L.; Edwards, L.; James, J. A. and Turski, M. (2006). Post-weld heat treatment stress relaxation in Zircaloy 4 plasma welds. Materials Science Forum, 524-525 pp. 491–496.

Santisteban, J. R.; Oliver, E. C.; Daymond, M. R.; Alianelli, L. and Edwards, L. (2006). Tensile deformation of a Cu mosaic crystal along the [110] direction studied by time of flight neutron transmission. Materials Science and Engineering A, 437(1) pp. 151–156.

Santisteban, J.R.; Daymond, M.R.; James, J.A. and Edwards, L. (2006). ENGIN-X: A third-generation neutron strain scanner. Journal of Applied Crystallography, 39(6) pp. 812–825.

Schadewitz, Nicole; Adler, Pedro-Jorge; Moncur, Wendy and Roberts, Joi (2006). The STAR Interaction Design Summer Schools Framework. In: Proceedings of WONDERGROUND, International Deign Research Conference, 1-3 November 2006, Lisbon, Portugal.

Schadewitz, Nicole and Jachna, Timothy (2006). Comparing design summer schools in European and Asian contexts. In: Proceedings of the International Design Research Symposium, IDRS, 10-12 November 2006, Seoul, Korea.

Sharp, D. and Chilekwa, V. (2006). An optimisation approach to the location and sizing of multiple leaks in a duct. In: Proceedings of the Institute of Acoustics, 3-4 April 2006, Southampton, UK.

Sharp, Helen; Petre, Marian and Johnson, Jeffrey (2006). Complexity through combination: an account of knitwear design. Design Studies, 27(2) pp. 183–222.

Slater, Rachel; Frederickson, James; Thomas, Christine; Potter, Stephen and Wield, David (2006). Partnership working: new roles for local authorities. In: Waste 2006, 19-21 September 2006, Warwick, UK.

Steuwer, A.; Edwards, L.; Pratihar, S.; Ganguly, S.; Peel, M.; Fitzpatrick, M. E.; Marrow, T. J.; Withers, P. J.; Sinclair, I.; Singh, K. D.; Gao, N.; Buslaps, T. and Buffière, J.-Y. (2006). In situ analysis of cracks in structural materials using synchrotron X-ray tomography and diffraction. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 246(1) pp. 217–225.

Tait, Joyce; Chataway, Joanna; Catherine, Lyall and Wield, David (2006). Governance, policy and industry strategies: pharmaceuticals and agro-biotechnology. In: Mazzucato, Mariana and Dosi, Giovanni eds. Knowledge accumulation and industry evolution: the case of Pharma-Biotech. Cambridge, UK: Cambridge University Press, pp. 378–401.

Tan, Jeffrey Meng-Lee; Fitzpatrick, Michael E. and Edwards, Lyndon (2006). A Novel Closed-Form Calculation of the Stress Intensity Factor for a Crack in a Residual Stress Field. Materials Science Forum, 524-525 pp. 83–88.

Turski, M.; Pratihar, S.; Edwards, L.; Daymond, M.R. and Fitzpatrick, M.E. (2006). The Effect of Plastic Anisotropy on the Residual Stress within a 316L Stainless Steel Bead-on-Plate Specimen. Materials Science Forum, 524-525 pp. 679–684.

Turski, M.; Edwards, L.; James, J.; Bouchard, P. J.; Smith, M. C. and Withers, P. J. (2006). Residual stress measurement within a single pass groove weld specimen utilising neutron diffraction and the contour method. In: ASME 2006 Pressure Vessels and Piping Conference (PVP2006), 23-27 July 2006, Vancouver, BC, Canada.

Waights, Verina (2006). Developing your career. In: Potter, Stephen ed. Doing Postgraduate research. UK: Sage publications, pp. 276–302.

Warren, James P. (2006). Hydrogen: tomorrow's fuel or just hot air? The Icelandic Experience. Traffic Engineering & Control, 47(5) pp. 168–170.

Warren, James P. and Enoch, Marcus P. (2006). Mobility, energy, and emissions in Cuba and Florida. Transportation Research Part D: Transport and Environment, 11(1) pp. 33–44.

Warren, James P. and Rhodes, Ed (2006). 'Smart' design: greening the Total Product System. In: Sarkis, Joseph ed. Greening the supply chain. Springer Verlag UK, pp. 271–291.

Wierzbanowski, K.; Wronski, S.; Baczmanski, A.; Wrobel, M.; Braham, C.; Fitzpatrick, M. and Lodini, A. (2006). Residual stresses induced by cross-rolling. Materials Science Forum, 524-525 pp. 63–68.

Wilson, Gordon (2006). Beyond the technocrat? The professional expert in development practice. Development and Change, 37(3) pp. 501–523.

Yanacopulos, Helen and Mohan, Giles (2006). Learning from African School. Development Education Journal, 12(2) pp. 19–22.

Yoxon, Mark; Burnley, Stephen and Gladding, Toni (2006). Environment management report. Focus on Waste Management. London: British Standards Institution.

2005

Eckert, Claudia and Clarkson, John eds. (2005). Design Process Improvement. Springer.

Acosta, Beatriz; Debrarberis, Luigui; Pirfo, Soraia; Sevini, F.; Kryukov, A.; Chernobaeva, A.; Gillemot, F. and Brumovsky, M. (2005). WWER-1000 base metal reference steel and its characterisation. Nuclear Engineering and Design, 235(17-19) pp. 1951–1959.

Alevizou, Panagiota (2005). Digital generations: Children, young people and new media. Education, Communication and Information, 5(1) pp. 83–90.

Ayele, Seife (2005). Biotechnology generation, delivery and adoption: the case of Bt biopesticide in Egypt. International Journal of Technology Management and Sustainable Development, 4(2) pp. 75–91.

Ayele, Seife and Wield, David (2005). Science and technology capacity building and partnership in African agriculture: perspectives on Mali and Egypt. Journal of International Development, 17(5) 631 -646.

Pirfo Barroso, Soraia ed. (2005). Embrittlement and Mechanistic Interpretation of Reactor Pressure Vessel and Internal Materials. EUR / European Commission, 21835 (EN). Luxembourg: Office for Official Publications of the European Communities.

Bouchard, P. J.; George, D.; Santisteban, J. R.; Bruno, G.; Dutta, M.; Edwards, L.; Kingston, E. and Smith, D. J. (2005). Measurement of the residual stresses in a stainless steel pipe girth weld containing long and short repairs. International Journal of Pressure Vessels and Piping, 82(4) pp. 299–310.

Bouchard, P. J. and Soanes, T. P. T. (2005). Residual stress and integrity management issues in power plant. In: IMechE Seminar: Post weld heat treatment and management of residual stress, 2005, London, UK.

Bouchard, Peter J.; Santisteban, Javier R.; Edwards, Lyndon; Turski, Mark; James, Jon; Pratihar, Sumit and Withers, Philip J. (2005). Residual stress measurements revealing weld bead start and stop effects in single and multi-pass weld-runs. In: ASME 2005 Pressure Vessels and Piping Conference (PVP2005), 17–21 July 2005, Denver, United States.

Bouchard, P. J. (2005). Special issue of the International Journal of Pressure Vessels and Piping on residual stresses at repair welds. Elsevier.

Boucher, C; Bouchard, P. J.; Brown, T. B.; Dauda, T. A.; Hein, H.; Lawrjaniec, D.; Smith, D. J.; Truman, C. E.; Ohms, D. C.; Smith, M. C.; Youtsos, A G and Cardamone, D. (2005). Management of nuclear power plant operation by optimising weld repairs - ENPOWER project overview. In: ASME 2005 Pressure Vessels and Piping Conference (PVP2005), 17–21 July 2005, Denver, USA.

Caird, Sally and Hallett, S. (2005). Postcards from the Future. OPEN2.net, Milton Keynes, UK.

Chataway, Joanna (2005). Introduction: Is it possible to create pro-poor agriculture-related biotechnology? Journal of International Development, 17(5) pp. 597–610.

Chataway, Jo; Hanlin, Rebecca; Murphy, Joseph and Smith, James (2005). Making Bioscience Related Health Innovations Work for the Poor: Are Public-Private Partnerships the Answer? ESRC Genomics Forum, UK.

Chataway, Joanna and Smith, James (2005). Smoke, mirrors and poverty: communication, biotechnological innovation and development. ESRC Innogen Research Centre, UK.

Clark, Norman (2005). Science policy and agricultural research in Africa: a capacity building needs assessment. NEPAD.

Clark, Norman (2005). Innovation Systems and Agricultural Development in Africa : A Capacity Building Needs Assessment. In: International Livestock Research Institute, 29 September 2005.

Demaid, Adrian and Quintas, Paul (2005). Sustainability and the designer: knowledge across cultures in the construction industry. In: Sustainable Urban Environments: Vision into Action, 28 Feb 2005, Birmingham, UK.

Dong, P.; Hong, J. K. and Bouchard, P. J. (2005). Analysis of residual stresses at weld repairs. International Journal of Pressure Vessels and Piping, 82(4) pp. 258–269.

Dougan, Sylvia (2005). Building what people want. Building for a Future, 14(4) pp. 30–35.

Earl, Chris; Eckert, Claudia and Clarkson, John (2005). Design change and complexity. In: 2nd Workshop on Complexity in Design and Engineering, March 2005, University of Glasgow, UK.

Earl, Chris; Johnson, Jeffrey and Eckert, Claudia (2005). Complexity. In: Clarkson, John and Eckert, Claudia eds. Design process improvement: a review of current practice. Springer Science+Business. London, UK: Springer Verlag, pp. 174–197.

Earl, Christopher; Eckert, Claudia and Johnson, Jeffrey (2005). Complexity of planning in design. In: Tumer, Irem Y.; Hayes, Caroline and Gupta, S. K. eds. Proceedings of the 2001 ASME Design Engineering Technical Conferences and Computers and Information in Engineering Conference. New York: American Society of Mechanical Engineers.

Earl, C.; Eckert, C.; Bucciarelli, L.; Whitney, D.; Knight, T.; Stacey, M.; Blackwell, A.; Macmillan, S. and Clarkson, P. J. (2005). Comparative study of design: application to Engineering Design. In: 15th International Conference in Engineering Design, ICED 2005, 15-18 August, Melbourne, Australia.

Earl, Chris; Johnson, Jeffrey and Eckert, Claudia (2005). Complexity. In: Clarkson, John and Eckert, Claudia eds. Design Process Improvement: A Review Of Current Practice. London, U.K.: Springer Science + Business Media, pp. 174–197.

Eckert, C.M.; Earl, C.E. and Clarkson, P.J. (2005). Predictability of change in engineering: A complexity view. In: Design Engineering Division, ASME and Computers and Information in Engineering Division, ASME eds. 17th International Conference on Design Theory and Methodology. New York: American Society of Mechanical Engineers, pp. 341–350.

Eckert, Claudia and Clarkson, John (2005). The reality of design. In: Clarkson, John and Eckert, Claudia eds. Design Process Improvement: A Review of Current Practice. London: Springer, pp. 1–29.

Eckert, Claudia; Maier, Anja and Mcmahon, Chris (2005). Communication in design. In: Clarkson, John and Eckert, Claudia eds. Design Process Improvement. London: Springer, pp. 232–261.

Eckert, Claudia; Earl, Christopher; Stacey, Martin; Bucciarelli, Louis L. and Clarkson, P. John (2005). Risk across design domains. In: 15th International Conference on Engineering Design (ICED05), 15-18 Aug 2005, Melbourne, Australia.

Eckert, Claudia; Stacey, Martin and Earl, Christopher (2005). References to past designs. In: Gero, J. S. and Bonnardel, N. eds. Studying Designers '05. Sydney, Australia: Key Centre of Design Computing and Cognition, pp. 3–21.

Edwards, L; Fitzpatrick, M. E.; Irving, P. E.; Sinclair, I; Zhang, X and Yapp, D (2005). An integrated approach to the determination and consequences of residual stress on the fatigue performance of welded aircraft structures. Journal of ASTM International

Edwards, L.; Bouchard, P.J.; Dutta, M.; Wang, D.Q.; Santisteban, J.R.; Hiller, S. and Fitzpatrick, M.E. (2005). Direct measurement of the residual stresses near a 'boat-shaped' repair in a 20 mm thick stainless steel tube butt weld. International Journal of Pressure Vessels and Piping, 82(4) pp. 288–298.

Elcoate, C. D.; Dennis, R. J.; Bouchard, P. J. and Smith, M. C. (2005). Three dimensional multi-pass repair weld simulations. International Journal of Pressure Vessels and Piping, 82(4) pp. 244–257.

Elliott, David (2005). Comparing support for renewable power. In: Lauber, Volkmar ed. Switching to renewable power: a framework for the 21st century. London, UK: Earthscan, pp. 219–227.

Enoch, Marcus; Potter, Stephen and Ison, Stephen (2005). A Strategic approach to financing public transport through property values. Public Money and Management, 25(3) pp. 147–154.

Eraslan, Ahmet N. and Kartal, Mehmet E. (2005). Stress distributions in cooling fins of variable thickness with and without rotation. Journal of Thermal Stresses, 28(8) pp. 861–883.

Everett, Robert (2005). The UK Electricity Industry - Transforming the Elephant. Network for Alternative Technology and Technology Assessment (NATTA).

Fitzpatrick, M. E.; Fry, A. T.; Holdway, P.; Kandil, F. A.; Shackleton, J. and Suominen, L (2005). Determination of residual stresses by X-ray diffraction. National Physical Laboratory, Teddington, UK.

Flanagan, T. L.; Keller, R.; Eckert, Claudia and Clarkson, P. J. (2005). Robust scheduling of design tasks using simulation. In: 15th International Conference on Engineering Design (ICED05), 15-18 Aug 2005, Melbourne, Australia.

Flanagan, T. L.; Keller, R.; Eckert, Claudia and Clarkson, P. J. (2005). Simulation in project management: potential value and barriers to adoption. In: Irish Academy of Management 8th Annual Conference, 7th-9th September 2005, Galway, Ireland.

Flanagan, T. L.; Keller, R.; Eckert, Claudia and Clarkson, P. J. (2005). Rework revisited: the criticality of iteration due to task failure in NPD planning. In: Engineering Management Society, IEEE ed. 2005 IEEE International Engineering Management Conference. IEEE Operations Center.

Gagg, C. R. (2005). Failure of components and products by ‘engineered-in’ defects: Case studies. Engineering Failure Analysis, 12(6) pp. 1000–1026.

Gagg, Colin (2005). Domestic product failures: Case studies. Engineering Failure Analysis, 12(5) pp. 784–807.

Garner, Steve (2005). Revealing design complexity: Lessons from the Open University. CoDesign: International Journal of CoCreation in Design and the Arts, 1(4) pp. 267–276.

Gehl Sampath, Padmashree (2005). Regulating Bioprospecting: Institutions for Drug Research, Access and Benefit-Sharing. Tokyo, Japan: United Nations University Press.

Gehl Sampath, Padmashree (2005). Economic Aspects of Access to Medicines After 2005: Product Patent Protection and Emerging Firm Strategies in the Indian Pharmaceutical Industry. CIPIH.

Gehl Sampath, Padmashree (2005). Focusing on Agricultural Biotechnology: Issues for Developing Countries. In: Melendez-Ortiz, Ricardo and Sanchez, Vicente eds. Trading in Genes: Development Perspectives on Biotechnology, Trade and Sustainability. Earthscan, pp. 77–88.

Grantham, Andrew and Kaplinsky, Raphael (2005). Getting the Measure of the Electronic Games Industry: Developers and the Management of Innovation. International Journal of Innovation Management, 9(2) pp. 183–213.

Hanlon, Joseph (2005). Is the international community helping to recreate the preconditions for war in Sierra Leone? The Round Table: The Commonwealth Journal of International Affairs, 94(381) pp. 459–472.

Hanlon, Joseph (2005). Bringing it all together: A case study of Mozambique. In: Junne, Gerd and Varkoren, Willemijn eds. Postconflict Development: Meeting New Challenges. London, UK: Lynne Reiner.

Hanlon, Joseph (2005). Mozambique. In: Mehler, Andreas ed. Africa Yearbook: Politics, Economy and Society South of the Sahara. Leiden & Boston: Brill.

Hanlon, Joseph (2005). A flawed election process in Mozambique and a landslide victory for Frelimo. In: Minnie, Jeanete ed. Outside the Ballot Box: Preconditions for elections in Southern Africa 2004/5. Windhoek, Namibia: Media Institute of Southern Africa (MISA).

Hanlon, Joseph (2005). 200 wars and the humanitarian response. In: Yanacopulos, Helen and Hanlon, Joseph eds. Civil War, Civil Peace. Oxford, UK: James Currey, pp. 18–48.

Hanlon, Joseph (2005). Intervention. In: Yanacopulos, Helen and Hanlon, Joseph eds. Civil War, Civil Peace. Oxford, UK: James Currey, pp. 49–71.

Hanlon, Joseph (2005). Roots of civil war: tick 'all of the above. In: Yanacopulos, Helen and Hanlon, Joseph eds. Civil War, Civil Peace. Oxford, UK: James Currey, pp. 72–94.

Hanlon, Joseph (2005). Ethnicity and identity. In: Yanacopulos, Helen and Hanlon, Joseph eds. Civil War, Civil Peace. Oxford, UK: James Currey, pp. 95–112.

Hanlon, Joseph (2005). External roots of internal war. In: Yanacopulos, Helen and Hanlon, Joseph eds. Civil War, Civil Peace. Oxford, UK: James Currey, pp. 113–134.

Hickey, Sam and Mohan, Giles (2005). Relocating participation within a radical politics of development. Development and Change, 36(2) pp. 237–262.

Holden, Georgina and Garner, Steven (2005). e-Learning in the Development of Design Skills and Knowledge at the Open University. In: Designs on eLearning, 14 - 15 Sept 2005, London.

Ieromonachou, Petros; Potter, Stephen and Warren, James (2005). Comparisons of different implementation procedures of road pricing schemes in two European countries. In: Proceedings of the VIII Nectar Conference, 2-4 June 2005, Las Palmas.

Iravani, Pejman; Johnson, Jeff H. and Rapanotti, Lucia (2005). Robotics and the Q-analysis of behaviour. In: Proceedings of the 10th International Symposium on Artificial Life and Robotics (AROB), 4-6 February 2005, Beneppu, Japan.

Jarratt, Timothy; Clarkson, John and Eckert, Claudia (2005). Engineering Change. In: Clarkson, John and Eckert, Claudia eds. Design Process Improvement: A review of current practice. London, UK: Springer, pp. 262–285.

Johnson, Jeff and Hirst, Tony (2005). Robots, art and complexity science. In: Complexity Symposium: Art, Complexity and Technology: Their Interaction in Emergence, 5-6 May 2005, Torino, Italy.

Johnson, Jeffrey (2005). Complexity science in collaborative design. CoDesign: International Journal of CoCreation in Design and the Arts, 1(4) pp. 223–242.

Kale, Dinar and Little, Stephen (2005). Knowledge generation in developing countries: a theoretical framework for exploring dynamic learning in high technology firms. Electronic Journal of Knowledge Management, 3(2) pp. 87–96.

Kaplinsky, Raphael (2005). Globalization, poverty and inequality: between a rock and a hard place. Cambridge, UK: Polity.

Kaplinsky, Raphael and Readman, Jeff (2005). Globalization and upgrading: what can (and cannot) be learnt from international trade statistics in the wood furniture sector? Industrial and Corporate Change, 14(4) pp. 679–703.

Kaplinsky, Raphael and Santos Paulino, Amelia (2005). Innovation and competitiveness: trends in unit prices in global trade. Oxford Development Studies, 33(3-4) pp. 333–355.

Keller, R.; Eckert, Claudia and Clarkson, P. J. (2005). Multiple views to support engineering change management for complex products. In: Roberts, Jonathan C. ed. Third International Conference on Coordinated & Multiple Views in Exploratory Visualization (CMV 2005). Los Alamitos, California: IEEE Computer Society.

Keller, R.; Eger, T.; Eckert, Claudia and Clarkson, P. J. (2005). Visualising change propagation. In: 15th International Conference on Engineering Design (ICED05), 15-18 Aug 2005, Melbourne, Australia.

Keller, René; Eckert, Claudia M. and Clarkson, P. John (2005). Viewpoints and views in engineering change management. In: 2nd Workshop on Complexity in Design and Engineering, March 2005, University of Glasgow, UK.

Khush, Gurdev S.; Nagarajan, S; Tuli, Rakesh and Clark, Norman (2005). Andhra Pradesh Netherlands Biotechnology Programme for dyland agriulture: Mid-term evaluation of second phase. Not Set.

Lane, A.B. and Oreszczyn, S.M. (2005). Should farmers be landscape planners too? In: Planning, people and practice: The landscape ecology of sustainable landscapes: Proceedings of the 13th Annual IALE(UK) Conference, 13-15 September 2005, Northampton, UK.

Lefebvre, F.; Ganguly, S. and Sinclair, I. (2005). Micromechanical aspects of fatigue in a MIG welded aluminium airframe alloyPart 1. Microstructural characterization. Materials Science and Engineering A, 397(1-2) pp. 338–345.

Levidow, Les; Carr, Susan and Wield, David (2005). EU regulation of agri-biotechnology: precautionary links between science, expertise and policy. Science and Public Policy, 32(4) pp. 261–276.

Levidow, Les (2005). Governing conflicts over sustainability: agricultural biotechnology in Europe. In: Higgins, Vaughan and Lawrence, Geoffrey eds. Agricultural governance: globalization and the new politics of regulation. Routledge advances in sociology. London, UK: Routledge, pp. 98–117.

Li, A.; Sharp, D.B. and Forbes, B.J. (2005). Increasing the axial resolution of bore profile measurements made using acoustic pulse reflectometry. Measurement Science and Technology, 16(10) pp. 2011–2019.

Li, Aijun and Sharp, David B. (2005). The Problem of offset in measurements made using acoustic pulse reflectometry. Acta Acustica united with Acustica, 91(4) pp. 789–796.

Lloyd, P.; Van der Hoog, W. and Van de Poel, I. (2005). Ethical aspects of the product design process: A protocol study. In: Studying Designers 05, 17-18 October 2005, Aix-en-Provence, France.

Lloyd, Peter and van de Poel, Ibo (2005). Designing games to teach ethics. In: Crossing Design Boundaries. Proceedings of the 3rd Engineering and Product Design Education International Conference, 15 - 16 Sept 2005, Edinburgh, UK.

Madshus, C.; Lovholt, F.; Kaynia, A.; Hole, L. R.; Attenborough, K. and Taherzadeh, S. (2005). Air-ground interaction in long range propagation of low frequency sound and vibration - field tests and model verification. Applied Acoustics, 66(5) pp. 553–578.

Maier, A. M.; Eckert, C. M. and Clarkson, P. J. (2005). A meta-model for communication in engineering design. CoDesign: International Journal of CoCreation in Design and the Arts, 1(4) pp. 243–254.

Maier, A. M.; Eckert, Claudia and Clarkson, P. J. (2005). Auditing communication in design: a maturity grid-inspired approach. In: Shen, Weiming ed. Proceedings of the Ninth International Conference on Computer Supported Cooperative Work in Design. Coventry, UK: Coventry University.

Matela, R. and Summer, J.M. (2005). Modelling Volcanic Fire-Fountains. In: NAFEMS World Congress, Engineering Simulation: Best Practices and Visions of the Future, 17-21 May 2005, Malta.

McMillan, Elizabeth (2005). Encouraging strategic change by using complexity based principles: a case study of the Open University. In: Richardson, K. ed. Managing Organizational Complexity: Philosophy, Theory and Application. Managing the Complex. USA: Information Age Publishing, pp. 505–519.

Mnyulwa, Doreen and Mugwagwa, Julius (2005). Agricultural biotechnology in southern Africa: A regional synthesis. In: Omamo, Steven Were and von Grebmer, Klaus eds. Biotechnology, Agriculture and Food Security in Southern Africa. Washington DC/Harare: International Food Policy Research Institute, pp. 13–36.

Mohan, Giles and Wilson, Gordon (2005). The Antagonistic relevance of development studies. Progress in Development Studies, 5(4) pp. 261–278.

Murphy, Joseph and Chataway, Joanna (2005). The challenges of policy integration from an international perspective: the case of GMOs. In: Lyall, Catherine and Tait, Joyce eds. New modes of governance: developing an integrated policy approach to science, technology, risk and the environment. UK: Ashgate, pp. 159–177.

Murphy, Joseph and Yanacopulos, Helen (2005). Understanding governance and networks: EU–US interactions and the regulation of genetically modified organisms. Geoforum, 36(5) pp. 593–606.

Nolle, L.; Zellinka, I.; Hopgood, A. A. and Goodyear, A. (2005). Comparison of an self-organizing migration algorithm with simulated annealing and differential evolution for automated waveform tuning. Advances in Engineering Software, 36(10) pp. 645–653.

O'Donovan, Brendan; Eckert, Claudia; Clarkson, John and Browning, Tyson R. (2005). Design planning and modelling. In: Clarkson, John and Eckert, Claudia eds. Design Process Improvement: A Review of Current Practice. London: Springer, pp. 60–87.

Oreszczyn, Sue (2005). GM crops in the United Kingdom: precaution as process. Science and Public Policy, 32(4) pp. 317–324.

Peake, Stephen (2005). Epistemologies of Climate Change: Science, Stories and Scepticism. Organization and Environment, 18(4) pp. 495–499.

Peake, Stephen (2005). COP10 Report: The tango goes on. Refocus, 6(1) pp. 54–55.

Peake, Stephen; Aczel, James and Hardy, Pascale (2005). Building capacity in climate change policy analysis and negotiation: methods and technologies. UNITAR.

Plumbridge, William J. (2005). Second generation lead-free solder alloys: a challenge to thermodynamics. Monatshefte fur Chemie / Chemical Monthly, 136(11) pp. 1811–1821.

Polido Gomes, J.; Kowal, J. and Edwards, L. (2005). An electrostatic actuated micro-structure for high-cycle fatigue testing. In: Proceedings of the 2005 SEM Annual Conference and Exposition on Experimental and Applied Mechanics, 7-9 June 2005, Portland, Oregon, USA.

Potter, Stephen and Parkhurst, Graham (2005). Transport policy and transport tax reform. Public Money and Management, 25(3) pp. 171–178.

Potter, Stephen; Parkhurst, Graham and Lane, Ben (2005). European perspectives on a new fiscal framework for transport. In: Reggiani, Aura and Schintler, Laurie A. eds. Methods and models in transport and telecommunications: Cross-Atlantic perspectives. Advances in spatial science. New York, USA: Springer, pp. 319–333.

Rhodes, Edward and Carter, Ruth (2005). The Frigero on-line simulation: experiencing supply chain strategy and management in a virtual team. In: ?hird International Conference on Open and Distance Learning ICODL 05, 11-13 Nov 2005, Patras, Greece.

Rist, Martin; Mulyadi, M.; Edwards, Lyndon and Brooks, J.W. (2005). Optimisation and confidence region estimation of constitutive parameters in equations for hot metal deformation. In: Banabic, D. ed. Proceedings of the 8th Esaform Conference on Material Forming. Bucuresti, Romania: The Publishing House of the Romanian Academy, pp. 61–64.

Robertson, D.; Barratt, R.S.; Burnley, S.J.; Webb, P. and Watson, J.S. (2005). The analysis of flue gas treatment residues using non-destructive X-ray fluorescence as a regulatory compliance test. Journal of Environmental Monitoring, 7(5) pp. 416–418.

Rooney, Joseph (2005). On the different forms of algebraic eliminant. In: International Workshop on Computational Kinematics (CK2005), 4-6 May 2005, Cassino, Italy.

Rosewell, Jonathan; Johnson, Jeffrey; Hirst, Tony and Price, Blaine (2005). Robotics and the meaning of life: a practical guide to things that think. In: CAL '05 'Virtual Learning?', 4-6 April 2005, Bristol, UK.

Schadewitz, Nicole (2005). Interaction and Interface Design Patterns for Intercultural Collaboration. In: Proceedings of the 7th International Workshop on Internationalisation of Products and Systems (IWIPS '05), 7-9 July 2005, Amsterdam, Netherlands.

Schadewitz, Nicole (2005). Interface and Interaction Design Patterns for Intercultural Collaboration. In: Proceedings of the Seventh International Workshop on Internationalisation of Products and Systems, 7-9 July 2005, Amsterdam.

Schneider, L.C.R.; Hainsworth, S.V.; Cocks, A.C.F. and Fitzpatrick, M.E. (2005). Neutron diffraction measurements of residual stress in a powder metallurgy component. Scripta Materialia, 52(9) pp. 917–921.

Serras, Joan (2005). Extending TRANSIMS Technology to an Integrated Multilevel Representation. In: International Conference on Computers in Urban Planning and Urban Management, 29th June - 1st July 2005, London, UK.

Smith, Michael C.; Bouchard, Peter J.; Goldthorpe, Martin R. and Lawrjaniec, Didier (2005). Fracture margins for growing cracks in weld repairs. In: ASME 2005 Pressure Vessels and Piping Conference (PVP2005), 17–21 July 2005, Denver, United States.

Steuwer, A.; Santisteban, Javier; Turski, M.; Withers, P. J. and Buslaps, T. (2005). High-resolution strain mapping in bulk samples using full-profile analysis of energy dispersive synchrotron X-ray diffraction data. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 238(1-4) pp. 200–204.

Steuwer, A.; Withers, P. J.; Santisteban, J. R. and Edwards, L. (2005). Using pulsed neutron transmission for crystalline phase imaging and analysis. Journal of Applied Physics, 97(7)

Sumner, J.M.; Blake, S.; Matela, R.J. and Wolff, J.A. (2005). Spatter. Journal of Volcanology and Geothermal Research, 142(1-2) pp. 49–65.

Tin, S.; Lee, P.D.; Kermanpur, A.; Rist, M. and McLean, M. (2005). Integrated Modeling for the Manufacture of Ni-Based Superalloy Discs from Solidification to Final Heat Treatment. Metallurgical and Materials Transactions A, 36A(9) pp. 2493–2504.

van Walstijn, Maarten; Cambell, Murray; Kemp, Jonathan and Sharp, David (2005). Wideband measurement of the acoustic impedance of tubular objects. Acta Acustica united with Acustica, 91(3) pp. 590–604.

Warren, J. P.; Potter, S. and Parkhurst, G. (2005). Implications of HGV charging for the UK. In: 37th Annual Conference of Universities Transport Study Group, 5-7 Jan 2005, Bristol, UK.

Wynn, D. C.; Eckert, Claudia and Clarkson, P. J. (2005). Modelling and simulating iterative development processes. In: 15th International Conference on Engineering Design (ICED05), 15-18 Aug 2005, Melbourne, Australia.

Wynn, D. C.; Eckert, Claudia and Clarkson, P. J. (2005). Addressing uncertainty in design planning and modeling: a case study of complex aerospace design. In: Design Engineering Division, ASME and Computers and Information in Engineering Division, ASME eds. 17th International Conference on Design Theory and Methodology. New York: American Society of Mechanical Engineers.

Wynn, David.; Eckert, Claudia and Clarkson, P. John (2005). Abstracting complexity for design planning. In: 2nd Workshop on Complexity in Design and Engineering, March 2005, University of Glasgow, UK.

Yanacopulos, Helen (2005). Patterns of Governance: the rise of transnational coalitions of NGOs. Global Society, 19(3) pp. 247–266.

Yanacopulos, Helen (2005). The strategies that bind: NGO coalitions and their influence. Global Networks, 5(1) pp. 93–110.

Zhang, Y.; Fitzpatrick, M. E. and Edwards, L. (2005). Analysis of the residual stress around a cold-expanded fastener hole in a Finite Plate. Strain, 41(2) pp. 59–70.

2004

Boyle, Godfrey ed. (2004). Renewable energy. 2nd edition. Oxford, UK: Oxford University Press & The Open University.

Adamowicz, E.; Borsi, B.; Cahil, E.; Devai, K.; Fazlagic, A.; Filacek, A.; Gallagher, N.; Jablecka, J.; Papaioannou, T.; Papanek, G.; Jozwiak, J.; Kedro, M.; Kurzydlowski, K.; Kultaca, D.; Loudin, J.; Mensink, W.; Micallef, j.; Papp, E.; Perenyi, A.; Restall, B.; Rush, H.; Schich, K.; Stanovnik, P. and Usenik, H. (2004). The RECORD experimental map: innovative research organisations in European accession countries. European Commission.

Adamowicz, E.; Borsi, B.; Cahill, E.; Devai, K.; Fazlagic, A.; Filacek, A.; Gallagher, N.; Jablecka, J.; Jozwiak, J.; Kedro, M.; Kurzydlowski, K.; Kutlaca, D.; Loudin, J.; Mensink, W.; Micallef, J.; Papaioannou, T.; Papanek, G.; Papp, E.; Perenyi, A.; Restall, B.; Rush, H.; Schuch, K.; Stanovnik, P. and Usenik, H. (2004). The RECORD manual: Benchmarking innovative research organisations in European accession countries. European Commission.

Albers, Albert; Ohmer, Manfred and Eckert, Claudia (2004). Engineering design in a different way: cognitive perspective on the contact and channel model approach. In: Visual and Spatial Reasoning in Design, 22-23 July 2003, University of Sydney, Cambridge, MA, USA.

Arivo, O. O.; Eckert, Claudia and Clarkson, P. J. (2004). Tolerance margins as constraining factors of changes in complex products. In: 5th Integrated Product Development Workshop (IPD 2004), 22-24 September 2004, Schonebeck/Bad Salzelmen b. Magdeburg, Germany.

August, Elias; Eckert, Claudia and Clarkson, P. John (2004). Using design structure matrices in visualizing design. In: Malcolm, Grant ed. Multidisciplinary Approaches to Visual Representations and Interpretations. Studies in Multidisciplinarity, 2. Amsterdam: Elsevier, pp. 305–318.

Baczmanski, A.; Levy-Tubiana, R.; Fitzpatrick, M.E. and Lodini, A. (2004). Elastoplastic deformation of Al/SiCp metal–matrix composite studied by self-consistent modelling and neutron diffraction. Acta Materialia, 52 pp. 1565–1577.

Balart, M.J.; Bouzina, A.; Edwards, L. and Fitzpatrick, M.E. (2004). The onset of tensile residual stresses in grinding of hardened steels. Materials Science and Engineering A, 367(1-2) pp. 132–142.

Barnes, Justin; Kaplinsky, Raphael and Morris, Mike (2004). Industrial policy in developing economies: Developing dynamic comparative advantage in the South African automobile sector. Competition and Change, 8(2) pp. 153–172.

Bouchard, P. J. and Withers, P. J. (2004). The appropriateness of residual stress length scales in structural integrity. Journal of Neutron Research, 12(1) pp. 81–91.

Bouchard, P. J.; Withers, P. J.; McDonald, S. A. and Heenan, R. K. (2004). Quantification of creep cavitation damage around a crack in a stainless steel pressure vessel. Acta Materialia, 52(1) pp. 23–34.

Boyle, Godfrey (2004). Photovoltaic power. In: Not Set ed. Renewable energy: power for a sustainable future [2nd ed.]. Oxford, UK: Oxford University Press, pp. 66–104.

Boyle, Godfrey (2004). Solar Photovoltaics. In: Boyle, Godfrey ed. Renewable Energy (2nd Edition). Oxford University Press, pp. 66–104.

Chataway, Joanna; Tait, Joyce and Wield, David (2004). Understanding company R&D strategies in agro-biotechnology: trajectories and blind spots. Research Policy, 33(6-7) pp. 1041–1057.

Clark, Norman (2004). The economic content of science and technology policy analysis. Xavier Management Institute.

Clarkson, P.J.; Simons, C and Eckert, Claudia (2004). Predicting change propagation in complex design. Journal of Mechanical Design, 126(5) pp. 788–797.

Cook, Guy; Robbins, Peter and Pieri, Elisa (2004). 'The scientists think and the public feels': expert perceptions of the discourse of GM food. Discourse and Society, 15(4) pp. 433–449.

Cook, M. (2004). Understanding the potential opportunities provided by service orientated concepts to improve resource productivity. In: Bhamra, Tracy and Hon, Bernard eds. Design and Manufacture for Sustainable Development 2004. Bury St. Edmonds, UK: Professional Engineering Publishing Limited, pp. 123–134.

Cook, Matthew B. and Bhamra, Tracy (2004). The transfer and application of sustainable product service Systems in UK manufacturing companies. In: 2nd SusProNet Conference, 3 - 4 June 2004, Brussels, Belgium.

Cross, Nigel (2004). Expertise in design: an overview. Design Studies, 25(5) pp. 427–441.

Dann, J.A.; Daymond, M.R.; Edwards, L.; James, J. and Santisteban, J.R. (2004). A comparison between Engin and Engin-X, a new diffractometer optimized for stress measurement. Physica B: Condensed Matter, 350(1-3) pp. 511–514.

Debarberis, L.; Acosta, B.; Sevini, F.; Pirfo, S.; Hyde, J. M.; Hutchings, M. T. and Ortner, S. (2004). Studies of radiation embrittlement of model alloys by positron annihilation, thermo-electric and magnetic measurements. NDT & E International, 37(1) pp. 19–22.

Demaid, A. and Quintas, P. (2004). Knowledge cartography in the sustainable environment. In: Proceedings for the IEEE International Engineering Management Conference, 18-21 Oct 2004, Singapore.

Dewberry, Emma (2004). Factor 10: the changing landscape of learning. In: Bhamra, Tracy and Hon, Bernard eds. Design and Manufacture for Sustainable Development 2004. Bury St Edmunds, UK: Professional Engineering Publishing (Wiley), pp. 145–155.

Dostaler, Isabelle; Oliver, Nick and Dewberry, Emma (2004). Le developpement de nouveaux produits: une comparaison des pratiques japonaises, britanniques et nord-americaines. Gestion, 28(4) pp. 7–18.

Dutta, M.; Bruno, G.; Edwards, L. and Fitzpatrick, M.E. (2004). Neutron diffraction measurement of the internal stresses following heat treatment of a plastically deformed Al/SiC particulate metal-matrix composite. Acta Materialia, 52(13) pp. 3881–3888.

Dye, D.; Roder, B.A.; Tin, S.; Rist, M.A.; James, J.A. and Daymond, M.R. (2004). Modeling and measurement of residual stresses in a forged IN718 superalloy disc. In: Not Set ed. Superalloys 2004. Warrendal, PA, USA: Minerals, Metals and Materials Society, pp. 315–322.

Earl, C.; Eckert, C. and Johnson, J. (2004). Complexity models in design. In: International Design Conference - Design 2004, 18-21 May 2004, Dubrovnik, Croatia.

Eckert, C; Stacey, M.K and Clarkson, P.J. (2004). The Lure of the Measurable in Design Research. In: Proceedings of Design 2004, 8th International Design Conference, 18-21 May 2004, Dubrovnik - Cavtat, CROATIA,.

Eckert, C. and Clarkson, P. (2004). If only I knew what you were going to do. Communication and planning in large organizations. In: Tichkiewitch, Serge and Brissaud, Daniel eds. Methods and Tools for Co-operative and Integrated Design. Dordrecht: Kluwer Academic Publishers, pp. 375–384.

Eckert, Claudia (2004). Status in industrial studies. In: Subrahmanian, E.; Sriram, R.; Herder, P.; Christiaans, H. and Schneider, R. eds. The Role of Empirical Studies in Understanding and Supporting Engineering Design. Delft: Delft University Press.

Eckert, Claudia; Blackwell, A. D.; Stacey, M. K. and Earl, Christopher (2004). Sketching across design domains. In: Visual and Spatial Reasoning in Design, 22-23 July 2003, University of Sydney, Cambridge, MA, USA.

Eckert, Claudia; Blackwell, B. D.; Bucciarelli, L. L.; Clarkson, P. J.; Earl, Christopher; Knight, T. W.; Macmillan, S.; Stacey, M. K and Whitney, D. E. (2004). What designers think we need to know about their processes: early results from a comparative study. In: Proceedings of Design 2004, 8th International Design Conference, 18-21 May 2004, Dubrovnik - Cavtat, Croatia.

Eckert, Claudia; Clarkson, P. and Zanker, Winfried (2004). Change and customisation in complex engineering domains. Research in Engineering Design, 15(1) pp. 1–21.

Elcoate, C. D.; Dennis, R. J.; Bouchard, P. J. and Smith, M. C. (2004). 3-dimensional repair weld simulations - Bead sequencing studies. In: ASME/JSME 2004 Pressure Vessels and Piping Conference (PVP2004), 25–29 July 2004, San Diego, USA.

Elliott, Dave (2004). Energy efficiency and renewables. Energy and Environment, 15(6) pp. 1099–1105.

Elliott, Dave and Cook, Terry (2004). Symbolic power: the future of nuclear energy in Lithuania. Science as Culture, 13(3) pp. 373–400.

Enoch, M.; Potter, S.; Ison, S. and Humphries, I. (2004). Role of Hypothecation in financing transit: lessons from the United Kingdom. In: Not Set ed. Not Set Not Set, pp. 31–37.

Enoch, Marcus; Nijkamp, Peter; Potter, Stephen and Ubbels, Barry (2004). Unfare solutions: local earmarked charges to fund public transport. Transport, Development & Sustainability. UK: Spon Press.

Enoch, Marcus; Warren, James P.; Valdes Rios, Humberto and Henríquez Menoyo, Enrique (2004). The Effect of economic restrictions on transport practices in Cuba. Transport Policy, 11(1) pp. 67–76.

Everett, Robert (2004). Solar Thermal Energy. In: Boyle, Godfrey ed. Renewable Energy (Second Edition). Oxford, UK: Oxford University Press, pp. 17–63.

Everett, Robert and Boyle, Godfrey (2004). Integration. In: Boyle, Godfrey ed. Renewable Energy (Second Edition). Oxford, UK: Oxford University Press, pp. 385–437.

Forbes, Naushad and Wield, David (2004). What is R&D? Why does it matter? Science and Public Policy, 31(4) pp. 267–277.

Gagg, C. R. (2004). Failure of Stainless Steel Water Pump Couplings. In: Jones, D. R. H. ed. Failure Analysis Case Studies III. Oxford, UK: Elsevier, pp. 225–236.

Ganguly, Supriyo; Fitzpatrick, MIchael E. and Edwards, Lyndon (2004). Comparative neutron and synchrotron X-ray diffraction studies to determine residual stress on an as-welded AA2024 plate. In: 7th International Conference on Residual Stresses (ICRS-7), 14-17 June, Xian, China.

Gehl Sampath, Padmashree (2004). Intellectual property rights on traditional medicinal knowledge: A process-oriented perspective. Journal of World Intellectual Property, 7(5) pp. 711–738.

Gehl Sampath, Padmashree (2004). Gender and the Agreement on Trade Related Aspects of Intellectual Property Rights: Exploring some interlinkages. In: Anh-Nga, Tran-Nguyen and Americo, Beviglia Zampetti eds. Trade and Gender: Opportunities and Challenges for Developing Countries. UNCTAD, pp. 251–291.

Gehl Sampath, Padmashree; Oyelaran-Oyeyinka, Banji and Mytelka, Lynn K. (2004). Study on the Biopharmaceutical System of Innovation in Nigeria, UNU-INTECH/ NABDA Study. The International Development Research Centre (IDRC).

Giustino, Manna; Pirfo, Soraia; Debarberis, Lugi; Castello, Paolo and Hurst, Roger (2004). Hydrogen attack characterisation by magnetic measurements. International Journal of Applied Electromagnetics and Mechanics, 19(1-4) pp. 597–599.

Hanlon, Joseph (2004). Do donors promote corruption?: the case of Mozambique. Third World Quarterly, 25(4) pp. 747–763.

Hanlon, Joseph (2004). It is possible to just give money to the poor. Development and Change, 35(2) pp. 375–383.

Hanlon, Joseph (2004). Renewed land debate and the 'cargo cult' in Mozambique. Journal of Southern African Studies, 30(3) pp. 603–626.

Hanlon, Joseph (2004). Bringing it all together: a case study of Mozambique. In: Junne, Gerd and Verkoren, Willemijn eds. Postconflict development: meeting new challenges. Boulder, Colorado, USA: Lynn Rienner, pp. 273–287.

Hanlon, Joseph (2004). It is possible to just give money to the poor. In: Pronk, Jan ed. Catalysing Development? A Debate on Aid. Blackwell, pp. 181–200.

Henry, Leroi; Mohan, Giles and Yanacopulos, Helen (2004). Networks as transnational agents of development. Third World Quarterly, 25(5) pp. 839–855.

Hossain, S.; Truman, C. E.; Smith, D. J. and Bouchard, P. J. (2004). Measurement of residual stresses in a type 316H stainless steel offset repair in a pipe girth weld. In: ASME/JSME 2004 Pressure Vessels and Piping Conference (PVP2004), 25–29 July 2004, San Diego, United States.

Hush, M. and Weidmann, G. W. (2004). What’s this got to do with engineering? – getting engineering students to think about personal and career development. In: Engineering Education conference - Innovation, good practice and research in engineering education, 7-9 June 2004, Wolverhampton.

Ieromonachou, Petros; Potter, Stephen and Enoch, Marcus (2004). Adapting Strategic Niche Management for Evaluating Radical Transport Policies – the case of the Durham Road Access Charging Scheme. International Journal of Transport Management, 2 pp. 75–87.

James, J.A.; Santisteban, J.R.; Edwards, L. and Daymond, M.R. (2004). A virtual laboratory for neutron and synchrotron strain scanning. Physica B: Condensed Matter, 350(1-3, Supplement 1) E743-E746.

Jarratt, T. A. W.; Eckert, C. M. and Clarkson, P. J. (2004). The benefits of predicting change in complex products: application areas of a DSM-based prediction tool. In: Marjanović, D. ed. Proceedings of Design 2004. Glasgow, UK: The Design Society.

Jarratt, T. A. W.; Eckert, Claudia and Clarkson, P. J. (2004). Pitfalls of engineering change: change practice during complex product design. In: 14th CIRP Design Seminar, May 2004, Cairo, Egypt.

Jarratt, T.A.W.; Eckert, Claudia and Clarkson, P.J. (2004). Development of a Product Model to Support Engineering Change Management. In: Proceedings Fifth International Symposium on Tools and Methods; Tools and Methods of Competitive Engineering, 13 - 17 Apr 2004, Lausanne, Switzerland,.

Jarratt, Timothy; Keller, René; Nair, Seena; Eckert, Claudia and Clarkson, P. John (2004). Visualization techniques for product change and product modelling in complex design. In: Blackwell, Alan; Marriott, Kim and Shimojima, Atsushi eds. Diagrammatic Representation and Inference. Lecture Notes in Computer Science, 2980/2004. Berlin; New York: Springer, pp. 388–391.

Jarratt, Tomothy AW; Eckert, Claudia M; Clarkson, P John and Stacey, Martin K (2004). Providing an Overview during the Design of Complex Products: The Development of a Product Linkage modelling method. In: International Conference on Design Computing and Cognition (DCC'04, 17-18 July 2004, MIT, Cambridge, USA.

Jazaeri, H. and Humphreys, F. J. (2004). The effect of initial grain size on the microstructures developed during cold rolling of a single-phase aluminium alloy. Materials Science Forum, 467 pp. 63–68.

Jazaeri, H. and Humphreys, F. J. (2004). The transition from discontinuous to continuous recrystallization in some aluminium alloys: II - annealing behaviour. Acta Materialia, 52(11) pp. 3251–3262.

Jazaeri, H. and Humphreys, F. J. (2004). Quantifying recrystallization by electron backscatter diffraction. Journal of Microscopy, 213(3) pp. 241–246.

Johnson, Jeffrey and Price, Blaine A. (2004). Complexity science and representation in robot soccer. In: Polani, Daniel; Browning, Brett; Bonarini, Andrea and Yoshida, Kazuo eds. RoboCup 2003: Robot Soccer World Cup VII. Lecture Notes in Computer Science, 3020. Berlin: Springer, pp. 67–76.

Johnson, Hazel and Thomas, Alan (2004). Professional capacity and organizational change as measures of educational effectiveness: assessing the impact of postgraduate education in development policy and management. Compare: A journal of comparative education, 34(3) pp. 301–314.

Kaplinsky, R.; Barnes, J.; Bessant, J. and Morris, M. (2004). Manufacturing Excellence in South Africa: CD and Accompanying Manuals. Department of Science and Technology.

Kaplinsky, Raphael and Kojima, Sakura (2004). The use of a lean production index in explaining the transition to global competitiveness: the auto components sector in South Africa. Technovation, 24(3) pp. 199–206.

Lewis, Peter. R. and Gagg, Colin. R. (2004). Aesthetics versus function: the fall of the Dee bridge, 1847. Interdisciplinary Science Reviews, 29(2) pp. 177–191.

Li, J.; Organ, S.J.; Terry, A.E.; Hobbs, J.K. and Barham, P.J. (2004). Crystallization of hydroxybutyrate oligomers. Part 3. Unfolding transitions followed in real time using SAXS and WAXS. Polymer, 45(26) pp. 8937–8947.

Li, J.; Organ, Sally; Hobbs, J.K.; Terry, A.E.; Barham, P.J. and Seebach, D. (2004). Crystallization of hydroxybutyrate oligomers: 1. morphology and folding. Polymer, 45(26) pp. 8913–8923.

Lloyd, Peter (2004). Paradox of the average: Why users need designers but designers don’t need users. Design Philosophy Papers(1)

Maier, A. M.; Eckert, Claudia and Clarkson, P. J. (2004). A communication audit for engineering design. In: 5th Integrated Product Development Workshop (IPD 2004), 22-24 September 2004, Schonebeck/Bad Salzelmen b. Magdeburg, Germany.

Martin, J. K. (2004). Measured stiffness and displacement coefficients of a stationary rotor hydrostatic bearing. Tribology International, 37(10) pp. 809–816.

Martin, J. K. (2004). Measuring the performance of a novel fluid film bearing supporting a rotor on a stationary shaft, by non-contacting means. Proceedings of the Institution of Mechanical Engineers Part K: Journal of Multi-body Dynamics, 218(3) pp. 143–151.

Matela, Raymond and Rymer, Hazel (2004). Gravity Meter. Raymond J. Matela & Hazel Rymer, UK Patent GB 0214433.5B.

McDonnell, Janet; Lloyd, Peter and Valkenburg, Rianne C. (2004). Developing design expertise through the construction of video stories. Design Studies, 25(5) pp. 509–525.

McMahon, C.; Ion, W.; Lloyd, P.; Roozenburg, N. and Brodhurst, L. (2004). A new forum for design education. In: Proceedings of ASME International Design Engineering Technical Conferences, 28 Sept - 2 Oct 2004, Salt Lake City, US.

Mytelka, Lynn K. and Barclay, Lou Anne (2004). Using foreign investment strategically for innovation. European Journal of Development Research, 16(3) pp. 531–560.

Nadri, B.; Edwards, L.; Fitzpatrick, M.E. and Lodini, A. (2004). Measurement of residual stresses following overloading of cold expanded holes using the X-ray diffraction technique and finite element method. Journal of Neutron Research, 12(1-3) pp. 219–224.

O'Donovan, B. D.; Eckert, Claudia and Clarkson, P. J. (2004). Simulating design processes to increase managers’ understanding. In: Proceedings of Design 2004, 8th International Design Conference, 18-21 May 2004, Dubrovnik - Cavtat, Croatia.

O'Donovan, B. D.; Eckert, Claudia and Clarkson, P. J. (2004). Simulating design processes to assist in design process planning. In: Design Engineering Division, ASME and Computers and Information in Engineering Division, ASME eds. 2004 Proceedings of Design Engineering Technical Conference & Computers & Information Engineering Conference: Vol 3. 16th International Conference on Design Theory and Methodology. New York: American Society of Mechanical Engineers.

Oliver, Nick; Dostaler, Isabelle and Dewberry, Emma (2004). New product development benchmarks: The Japanese, North American, and UK consumer electronics industries. Journal of High Technology Management Research, 15(2) pp. 249–260.

Oreszczyn, Sue (2004). Precaution as Process. The Open University, UK.

Organ, S.J.; Li, J.; Terry, A.E.; Hobbs, J.K. and Barham, P.J. (2004). Crystallization of hydroxybutyrate oligomers. Part 2. Growth and thickening of solution grown crystals observed in situ using synchrotron radiation. Polymer, 45(26) pp. 8925–8936.

Organ, Sally J.; Hobbs, Jamie K. and Miles, Mervyn J. (2004). Reorganization and melting of polyethylene single crystals: Complementary TEM, DSC, and real-time AFM studies. Macromolecules, 37(12) pp. 4562–4572.

Özdemir, A. Tamer and Edwards, Lyndon (2004). Through-thickness residual stress distribution after the cold expansion of fastener holes and its effect on fracturing. Journal of Engineering Materials and Technology, 126(1) pp. 129–136.

Paterson, N.T.; Gorham, D. A.; Matela, R.; Moffatt, J. E.; Greasley, A. and Karet, B. (2004). A finite element study of the mechanics of sports mouthguards. In: Hubbard, M.; Mehta, R. D. and Pallis, J. M. eds. The Engineering of Sport 5. UK: International Sports Engineering Assocation, pp. 354–360.

Plumbridge, W.J. (2004). Long term mechanical reliability with lead-free solders. Soldering and Surface Mount Technology, 16(2) pp. 13–20.

Plumbridge, W.J. and Kariya, Y. (2004). Structural integrity in electronics. Fatigue and Fracture of Engineering Materials and Structures, 27(8) pp. 723–734.

Plumbridge, W.J.; Matela, R.J. and Westwater, A. (2004). Structural integrity and reliability in electronics: enhancing performance in a lead-free environment. The Netherlands: Springer.

Potter, Stephen; Parkhurst, Graham; Lane, Ben; Ubbels, Barry and Peeters, Paul (2004). Taxation Futures for Sustainable Mobility: final report to the ESRC. Open University, Milton Keynes, UK.

Potter, Stephen; Ubbels, Barry; Peeters, Paul and Parkhurst, Graham (2004). Adapting the Dutch 'mobility explorer' program to investigate possible car taxation futures in the UK. In: Universities Transport Studies Group Annual Conference, 5-7 January 2004, Newcastle upon Tyne, UK.

Robbins, Peter (2004). Global Visions and Globalizing Corporations: An Analysis of Images and Texts from Fortune Global 500 Companies. Sociological Research Online, 9(2)

Robbins, Peter T.; Pieri, Elisa and Cook, Guy (2004). GM scientists and the politics of the risk society. In: Haugestad, Anne K. and Wulfhorst, J.D. eds. Future as fairness: ecological justice and global citizenship. At the interface/Probing the boundaries (10). Amsterdam, Netherlands: Rodopi, pp. 85–104.

Roy, Robin; Potter, Stephen and Yarrow, Karen (2004). Towards sustainable higher education: environmental impacts of conventional campus, print-based and electronic/open learning systems. In: Murphy, D; Carr, R; Taylor, J. and Wong, T.M eds. Distance Education & Technology: Issues and Practice. Hong Kong: Open University of Hong Kong Press, pp. 129–145.

Schneider, L.C.R.; Fitzpatrick, M.E.; Daymond, M.R.; Hainsworth, S.V. and Cocks, A.C.F. (2004). Measurement of Residual Stress in a Powder Metallurgy Aluminium-SiC Composite. Journal of Neutron Research, 12(1-3) pp. 129–133.

Shohji, Ikuo; Gagg, Colin and Plumbridge, William J. (2004). Creep properties of Sn-8Mass%Zn-3Mass%Bi lead-free alloy. Journal of Electronic Materials, 33(8) pp. 923–927.

Smith, Matt and Yanacopulos, Helen (2004). The Public faces of Development: an introduction. Journal of International Development, 16(5) pp. 657–664.

Stefanescu, D.; Santisteban, J.R.; Edwards, L. and Fitzpatrick, M. E. (2004). Residual stress measurement and fatigue crack growth prediction after cold expansion of cracked fastener holes. Journal of Aerospace Engineering, 17(3) pp. 917–97.

Stefanescu, D.; Steuwer, A.; Owen, R. A.; Nadri, B.; Edwards, L.; Fitzpatrick, M. E. and Withers, P. J. (2004). Elastic strains around cracked cold-expanded fastener holes measured using the synchrotron X-ray diffraction technique. Journal of Strain Analysis for Engineering Design, 39(5) pp. 459–469.

Stelmukh, V.; Edwards, L. and Ganguly, S. (2004). Full stress tensor determination in a textured aerospace aluminium alloy plate using synchrotron X-ray diffraction. Textures and Microstructures, 35(3-4) pp. 175–183.

Steuwer, A.; Santisteban, J. R.; Turski, M.; Withers, P. J. and Buslaps, T. (2004). High-resolution strain mapping in bulk samples using full-profile analysis of energy-dispersive synchrotron X-ray diffraction data. Journal of Applied Crystallography, 37(6) pp. 883–889.

Steuwer, A.; Santisteban, J. R.; Withers, P. J. and Edwards, L. (2004). Pattern decomposition and quantitative-phase analysis in pulsed neutron transmission. Physica B: Condensed Matter, 350(1-3) pp. 159–161.

Tan, C. Y.; Chen, Linfeng; Chong, K. B. and Ong, C. K. (2004). Nondestructive microwave permittivity characterization of ferroelectric thin film using microstrip dual resonator. Review of Scientific Instruments, 75(1) pp. 136–140.

Turski, M.; Sherry, A. H.; Bouchard, P. J. and Withers, P. J. (2004). Residual stress driven creep cracking in type 316 stainless steel. Journal of Neutron Research, 12(1-3) pp. 45–49.

Verdonck, Partick; Goodyear, Alec and Braithwaite, Nicholas St John (2004). The Influence of diffusion of fluorine compounds for silicon lateral etching. Thin Solid Films, 459(1-2) pp. 141–144.

Warren, James P. and Enoch, M. P. (2004). “Needs must when the blockade drives”: Cuba's less intensive transport society can teach the developed world a few lessons. Cuba Si - Journal of the Cuba Solidarity Campaign

Yan, L.; Kong, L. B.; Chen, L. F.; Chong, K. B.; Tan, C. Y. and Ong, C. K. (2004). Ba0.5Sr0.5TiO3–Bi1.5Zn1.0Nb1.5O7 composite thin films with promising microwave dielectric properties for microwave device applications. Applied Physics Letters, 85(16) pp. 3522–3524.

Yanacopulos, Helen (2004). The Public Face of Debt. Journal of International Development, 16(5) pp. 717–727.

Zack-Williams, Tunde and Mohan, Giles (2004). The Theories of the State/the State of Theories. In: Mohan, Giles and Zack-Willams, Tunde eds. The Politics of Transition: State, democracy and economic development in Africa. James Currey.

Zhang, Y.; Ganguly, S.; Edwards, L. and Fitzpatrick, M.E. (2004). Cross-sectional mapping of residual stresses in a VPPA weld using the contour method. Acta Materialia, 52(17) pp. 5225–5232.

Zhang, Ying; Pratihar, S.; Fitzpatrick, Michael E. and Edwards, Lyndon (2004). Residual stress mapping in welds using the contour method. In: 7th International Conference on Residual Stresses (ICRS-7), 14-17 June, Xian, China.

2003

Borsi, Balazs; Papanek, Gabor and Papaioannou, Theodoros eds. (2003). The Ljubljana Proceedings of the RECORD Thematic Network: Towards the Practice of Benchmarking RTD Organisations in Accession Countries. European Union.

Boyle, Godfrey; Everett, Robert and Ramage, Janet eds. (2003). Energy Systems and Sustainability. Oxford, UK: Oxford University Press.

Elliott, David ed. (2003). Energy, Society and Environment (Second Edition). Routledge Introductions to Environment. Abingdon, UK: Routledge.

Fitzpatrick, M.E. and Lodini, Alain eds. (2003). Analysis of residual stress using neutron and synchrotron radiation. London, UK: Taylor & Francis.

Anderson, Carl and McMillan, Elizabeth (2003). Of ants and men: self organization in human and insect teams. Emergence: Complexity and Organization, 5(2) pp. 29–41.

Bekker, Mathilde; Beusmans, Julie; Keyson, David and Lloyd, Peter (2003). KidReporter: a user requirements gathering technique for designing with children. Interacting with Computers, 15(2) pp. 187–202.

Bessant, John; Kaplinsky, Raphael and Lamming, Richard (2003). Putting supply chain learning into practice. International Journal of Operations and Production Management, 23(2) pp. 167–184.

Bessant, John; Kaplinsky, Raphael and Morris, Mike (2003). Developing capabilty through learning networks. International Journal of Technology Management and Sustainable Development, 2(1) pp. 19–38.

Boyle, Godfrey (2003). Remedies. In: Boyle, Godfrey; Everett, Bob and Ramage, Janet eds. Energy systems and sustainability. Oxford, UK: Oxford University Press, pp. 573–596.

Boyle, Godfrey (2003). Introductory Overview: Why Sustainable Energy Matters. In: Boyle, Godfrey; Everett, Bob and Ramage, Janet eds. Energy Systems and Sustainability: Power for a Sustainable Future. Oxford, UK: Oxford University Press, pp. 1–54.

Burnley, S.J. (2003). The use of chemical composition data in assessing the environmental impact of municipal waste management options. In: Ninth International Waste Management and Landfill Symposium, 6-10 Oct 2003, Sardinia, Italy.

Carr, Susan and Oreszczyn, Sue (2003). Critical systems heuristics: a tool for the inclusion of ethics and values in complex policy decisions. In: Ethics as a Dimension of Agrifood Policy: Proceedings of the 4th Congress of the European Society for Agricultural and Food Ethics, 20-22 March 2003, Toulouse, France.

Chataway, Joanna; Quintas, Paul; Wield, David and Gault, Fred (2003). From digital divide to knowledge divide - a primer. In: Sciadas, George ed. Monitoring the digital divide and beyond. Montreal, Canada: Orbicom, pp. 89–144.

Clark, Norman; Hall, Andy; Sulaiman, Rasheed and Naik, Guru (2003). Research as Capacity Building: The Case of an NGO Facilitated Post-Harvest Innovation System for the Himalayan Hills. World Development, 31(11) pp. 1845–1863.

Cooke, Catherine (2003). Book Review of 'Architecture in the age of Stalin: Culture Two' by Vladimir Paperny. Slavonic and East European Review, 81(3) pp. 571–573.

Dewberry, Emma (2003). Designing out crime: Insights from ecodesign. Security Journal, 16(1) pp. 51–62.

Earl, Christopher; Song, Dong Ping and Hicks, Christian (2003). Planning complex engineer-to-order products. In: Gogu, Grigore; Coutellier, Daniel; Chedmail, Patrick and Ray, Pascal eds. Recent Advances in Integrated Design and Manufacturing in Mechanical Engineering. Dordecht, Netherlands: Kluwer, pp. 463–472.

Eckert, Claudia and Boujut, Jean-François (2003). The role of objects in design co-operation: communication through physical or virtual objects. Computer Supported Cooperative Work, 12(2) pp. 145–151.

Eckert, Claudia and Stacey, Martin (2003). Adaptation of Sources of Inspiration in Knitwear Design. Creativity Research Journal, 15(4) pp. 355–384.

Eckert, Claudia and Stacey, Martin (2003). Sources of Inspiration in Industrial Practice. The Case of Knitwear Design. Journal of Design Research, 3(1) doi:10.1504/JDR.2003.009826.

Eckert, C. M and Clarkson, P. J (2003). The reality of design process planning. In: Proceedings of the 14th International Conference on Engineering Design (ICED'03), 19-21 August 2003, Stockholm, Sweden.

Eckert, C. M.; Stacey, M. K. and Clarkson, P. J. (2003). The spiral of applied research: A methodological view on integrated design research. In: Proceedings of the 14th International Conference on Engineering Design (ICED'03), 19-21 August 2003, Stockholm, Sweden.

Eckert, Claudia and Stacey, Martin (2003). Knitwear customisation as repeated redesign. In: 2nd Interdisciplinary World Congress on Mass Customization and Personalization (MCPC'03), 6-8 October 2003, Technical University of Munich, Germany.

Eckert, Claudia; Stacey, Martin and Earl, Christopher (2003). Ambiguity is a double-edged sword: similarity references in communication. In: Proceedings of the 14th International Conference on Engineering Design (ICED'03), 19-21 August 2003, Stockholm, Sweden.

Eger, T.; Eckert, C. M. and Clarkson, P. J. (2003). Towards a change process planning tool. In: Proceedings of the 14th International Conference on Engineering Design (ICED'03), 19-21 August 2003, Stockholm, Sweden.

Elliott, David (2003). A Solar World: Climate Change and the Green Energy Revolution. Schumacher Briefing, 10. Totnes, UK: Green Books.

Elliott, David (2003). A Sustainable Future? The limits to Renewables. In: Douthwaite, Richard ed. Before the Wells Run Dry. Dublin, Ireland: Feasta.

Elliott, David (2003). Sustainable energy: choices, problems and opportunities. In: Hester, R. E. and Harrison, R. M. eds. Sustainability and Environmental Impact of Renewable Energy Sources. The Royal Society of Chemistry, pp. 19–47.

Enoch, M. P. and Warren, J. P. (2003). Necessity nudges Cuba towards a less transport intensive society. Traffic Engineering & Control, 44(8) pp. 278–281.

Enoch, Marcus and Potter, Stephen (2003). Encouraging the commercial sector to help employees to change their travel behaviour. Transport Policy, 10(1) pp. 51–58.

Fitzgerald, E.J.; Caffrey, J.M.; Nesaratnam, S.T. and McLoughlin, P. (2003). Copper and lead concentrations in salt marsh plants on the Suir Estuary, Ireland. Environmental Pollution, 123(1) pp. 67–74.

Flanagan, T. L.; Eckert, C. M. and Clarkson, P. J. (2003). Parameter trails. In: Proceedings of the 14th International Conference on Engineering Design (ICED'03), 19-21 August 2003, Stockholm, Sweden.

Flanagan, T. L.; Eckert, C. M.; Smith, J.; Eger, T. and Clarkson, P. J. (2003). A functional analysis of change propagation. In: Proceedings of the 14th International Conference on Engineering Design (ICED'03), 19-21 August 2003, Stockholm, Sweden.

Forbes, Barbara J.; Pike, E. Roy and Sharp, David B. (2003). The Acoustical Klein-Gordon equation: the wave-mechanical step and barrier potential functions. Journal of the Acoustical Society of America, 114(3) pp. 1291–1302.

Forbes, Barbara J.; Sharp, David B.; Kemp, Jonathan A. and Li, Aijun (2003). Singular system methods in acoustic pulse reflectometry. Acta Acustica united with Acustica, 89(5) pp. 743–753.

Garner, Steven and Mann, Phebe (2003). Interdisciplinarity: Perceptions of the value of computer supported collaborative work in design for the built environment. Automation in Construction, 12(5) pp. 495–499.

Gladding, Toni; Thorn, Jorgen and Stott, David (2003). Organic dust exposure and work-related effects among recycling workers. American Journal of Industrial Medicine, 43(6) pp. 584–591.

Hanlon, Joseph (2003). Peace Without Profit: How the IMF Blocks Rebuilding in Mozambique. Oxford, UK: James Currey.

Hanlon, Joseph (2003). Mozambique: Round up all the Usual Suspects. Review of African Political Economy, 30(98) pp. 653–654.

Hanlon, Joseph (2003). Preface-Prefácio to Carlos Serra 'Cólera e catarse'. In: Serra, Carlos ed. Cólera e Catarse. Maputo, Moçambique: Imprensa Universitária, Universidade Eduardo Mondlane.

Jarratt, T. A. W.; Eckert, Claudia; Weeks, R. and Clarkson, P. J. (2003). Environmental legislation as a driver of design. In: Proceedings of the 14th International Conference on Engineering Design (ICED'03), 19-21 August 2003, Stockholm, Sweden.

Johnson, Jeffrey (2003). Children, robotics, and education. Artificial Life and Robotics, 7(1-2) pp. 16–21.

Johnson, Jeffrey; Hirst, Tony and Garner, Steven (2003). Learning from designing the RoboFesta - Blue Peter robots. Artificial Life and Robotics, 7 pp. 22–27.

Johnson, Hazel and Thomas, Alan (2003). Education for development policy and management: impacts on individual and organizational capacity-building. Not Set, UK.

Johnson, Jeffrey and Price, Blaine (2003). Representing Patterns of autonomous agent dynamics in multi-robot systems. In: The Eighth International Symposium on Artificial Life and Robotics (AROB-8), 24-26 Jan 2003, Beppu, Oita, Japan.

Kaplinsky, Raphael (2003). Is globalisation all it is cracked up to be? In: Benewick, R; Blecher, M and Cook, S eds. Asian Politics in Development: Essays in Honour of Gordon White. London: Frank Cass, pp. 255–272.

Kaplinsky, Raphael and Morris, Michael (2003). Governance matters in value chains. Developing Alternatives, 9: Competitiveness(1) pp. 11–18.

Kaplinsky, Raphael; Memedovic, Olga; Morris, Mike and Readman, Jeff (2003). The global wood furniture value chain: what prospects for upgrading by developing countries? The case of South Africa. UNIDO, Vienna.

Levidow, Les (2003). Mercantilizando la educación superior: estrategias neoliberales y contra–estrategias. Boletin de Educación Superior(14-15) pp. 4–11.

Lewis, Peter R.; Reynolds, Ken and Gagg, Colin (2003). Forensic Materials Engineering: Case Studies. UK: CRC Press.

Liu, X.W. and Plumbridge, W.J. (2003). Thermomechanical fatigue of Sn–37 wt.% Pb model solder joints. Materials Science and Engineering A, 362(1-2) pp. 309–321.

Liu, X.W. and Plumbridge, W.J. (2003). Damage produced in model solder (Sn-37Pb) joints during thermomechanical cycling. Journal of Electronic Materials, 32(4) pp. 278–286.

Lloyd, P. and Snelders, D. (2003). What was Philippe Starck thinking of? Design Studies, 24(3) pp. 237–253.

Lloyd, P.; Valkenburg, R. and McDonnell, J. (2003). Making the final cut: re-presenting the industrial design process using video. In: Proceedings of Engineering and Product Design Education Conference, 3-4 September 2003, Coventry, UK.

Lloyd, Peter and Busby, Jerry (2003). 'Things that went well - no serious accidents or deaths': ethical reasoning in a normal engineering design process. Science and Engineering Ethics, 9(4) pp. 503–516.

Lloyd, Peter; Valkenburg, Rianne and McDonnell, Janet (2003). The Truth about Designing: Conclusions from the Video Assisted Learning in Design (VALiD) Project. In: Proceedings of the 14th International Conference of Engineering Design (ICED), 19 - 23 August 2003, Stockholm, Sweden.

Martin, J. K.; Matela, R. J. and Sherwen, R. G. (2003). Modelling heat transfer through a novel design of rotary kiln. International Journal of Computer Applications in Technology, 17(4) pp. 233–243.

Martin, Keith (2003). The potential use of new forms of adjustable hydrodynamic bearings in the intelligent monitoring and maintenance of machine accuracies. In: International Conference on Intelligent Maintenance Systems, 30 Oct - 01 Nov 2003, Xi'an Jiaotong University, Xi'an, China.

Martin, Keith James; Parkins, David Walter and Jia, Haibo (2003). The design and development of a high speed journal bearing test rig for measuring dynamic characteristics of oil film bearings. In: Proceedings of the 2003 STLE Annual Meeting , 27 April - 02 May 2003, New York, NY, USA.

McDonnell, Janet; Lloyd, Peter and Valkenburg, Rianne (2003). Encouraging the development of design expertise through the construction of video stories about the design process. In: Expertise in Design: Design Thinking Research Symposium 6, 17-19 November 2003, Sydney, Australia.

McMillan, Elizabeth (2003). Complexity, organizations and change. UK: Routledge.

McMillan, Elizabeth and Carlisle, Ysanne (2003). Complexity, strategic thinking and organisational change. In: 17th Australian and New Zealand Academy of Management Conference, 2 - 5 December 2003, Freemantle, Western Australia, Australia.

Mercer, Claire; Mohan, Giles and Power, Marcus (2003). Towards a critical political geography of African development. Geoforum, 34(4) pp. 419–436.

Muraguri, Lois; Jones, R. B. and Freeman, H. A. F. (2003). Review of the Policy, Regulatory Mechanisms and Administration of Biosafety in Eastern and Southern Africa: A study of Kenya, South Africa, Malawi and the ASARECA initiative. ICRISAT, Nairobi, Keyna.

O'Donovan, B. D.; Clarkson, P. J. and Eckert, Claudia (2003). Signposting: modelling uncertainty in design processes. In: Proceedings of the 14th International Conference on Engineering Design (ICED'03), 19-21 August 2003, Stockholm, Sweden.

Papaioannou, Theodoros (2003). Market Order and Justice in Hayek's Political Theory: the Exclusion and Requirement of Substantive Politics. Social Science Information, 42(2) pp. 229–253.

Papaioannou, Theodoros (2003). Benchmarking Centres of Excellence and the OECD Manuals of Science and Technology Measurement. In: Papanek, G.; Borsi, B. and Papaioannou, Theodoros eds. Ljubljana Proceedings of the RECORD Thematic Network: Towards the Practice of Benchmarking RTD Organisations in Accession Countries. European Commission, pp. 229–237.

Pirfo, S.; Debarberis, L.; Acosta, B. and Sevini, F. (2003). Magnetic and Barkhausen signal responses applied on sub-sized Charpy specimens to characterise irradiation effects. In: 11th International Symposium on Applied Electromagnetics and Mechanics, 12-14 May, 2003, Versaille, France.

Pirfo, S.; Szielasko, K.; Altpeter, I. and Dobmann, G. (2003). Dynamic magnetostriction for material characterisation of micro structure states of degraded structural steel. In: Nondestructive Characterization of Materials XI: Proceedings of the 11th International Symposium, June 24-28, 2002, Berlin, germany.

Plumbridge, W.J. (2003). The analysis of creep data for solder alloys. Soldering and Surface Mount Technology, 15(1) pp. 26–30.

Plumbridge, William (2003). Mechanical evaluation in electronics. In: Suganama, K. ed. Lead-free soldering in electronics: Science, technology and environmental impact. New York: Marcel Dekker, pp. 183–218.

Potter, Stephen and Rye, Tom (2003). Economic instruments and traffic restraint. In: Hine, J and Preston, J eds. Integrated futures and transport choices: UK transport policy beyond the 1998 White Paper and Transport Acts. Transport and Society. Aldershot, UK: Ashgate, pp. 287–304.

Potter, Stephen (2003). Transport energy and emissions: urban public transport. In: Hensher, David and Button, Kenneth eds. Handbook of transport and the environment, 4. Handbooks in Transport. Amsterdam, Netherlands: Elsevier, pp. 247–262.

Robbins, Peter T. (2003). Transnational corporations and the discourse of water privatization. Journal of International Development, 15(8) pp. 1073–1082.

Rooney, J. and Tanev, T. K. (2003). Contortion and Formation Structures in the Mappings between Robotic Jointspaces and Workspaces. Journal of Robotic Systems, 20(7) pp. 341–353.

Sharp, D.B.; Wright, H.A.K. and Ring, W. (2003). An Acoustical investigation into the effect of the crook profile on the sound produced by the bassoon. Acta Acustica united with Acustica, 89(1) pp. 137–144.

Sklar, Elizabeth; Eguchi, Amy and Johnson, Jeffrey (2003). RoboCupJunior: learning with educational robots. A I Magazine, 24(2; Summer) pp. 43–46.

Stacey, Martin and Eckert, Claudia (2003). Against Ambiguity. Computer Supported Cooperative Work, 12(2) pp. 153–183.

Stacey, M. K.; Earl, Christopher; Eckert, Claudia and O'Donovan, B. D. (2003). A methodology for comparing design processes. In: Proceedings of the 14th International Conference on Engineering Design (ICED'03), 19-21 August 2003, Stockholm, Sweden.

Stefanescu, D.; Dutta, M; Wang, D. Q.; Edwards, L. and Fitzpatrick, M. E. (2003). The effect of high compressive loading on residual stresses and fatigue crack growth at cold expanded holes. Journal of Strain Analysis for Engineering Design, 38(5) pp. 419–427.

Stefanescu, D.; Edwards, L. and Fitzpatrick, M.E. (2003). Stress intensity factor correction for asymmetric through-thickness fatigue cracks at holes. International Journal of Fatigue, 25(7) pp. 569–576.

Steuwer, A.; Santisteban, J. R.; Withers, P. J.; Edwards, L. and Fitzpatrick, M. E. (2003). In situ determination of stresses from time-of-flight neutron transmission spectra. Journal of Applied Crystallography, 36(5) pp. 1159–1168.

Terry, A.E.; Hobbs, J.K.; Organ, S.J. and Barham, P.J. (2003). In situ synchrotron study of the solution crystallization of ultralong alkanes from dilute solution. Polymer, 44(10) pp. 3001–3008.

Thomas, Christine; Frederickson, James; Burnley, Stephen and Slater, Rachel (2003). Developing Integrated Waste Management Systems: Information Needs and the Role of Locally Based Data. Integrated Waste Systems, The Open University, Milton Keynes, UK.

van Kesteran, Ilse E. H.; Bekker, Mathilde M.; Vermeeren, Arnold P.O.S . and Lloyd, Peter A. (2003). Assessing usability evaluation methods on their effectiveness to elicit verbal comments from children subjects. In: Interaction Design and Children (IDC 2003), 1-3 July 2003, University of Central Lancashire, Preston, UK.

Warren, James P. (2003). Book review of The Earthscan Reader: World Transport Policy and Practice. Local Transport Today(375) p. 17.

Wield, David (2003). Tools for project development. In: Eade, Deborah ed. Development, methods and approaches: ciritical reflections. Development in Practice Readers. Oxford, UK: Oxfam.

Wuyts, Marc (2003). The Agrarian question in Mozambique’s transition and reconstruction. In: Addison, Tony ed. From Conflict to Recovery in Africa. WIDER Studies in Development Economics. Oxford: Oxford University Press, pp. 141–154.

Wynn, David; Eckert, Claudia and Clarkson, P. John (2003). Planning business processes in product development organisations. In: The 15th Conference on Advanced Information Systems Engineering. Workshop Proceedings. Information Systems for a Connected Society, 16-20 June 2003, Klagenfurt/Velden, Austria.

Zamenopoulos, Theodore and Alexiou, Katerina (2003). Computer-aided creativity and learning in distributed cooperative human-machine networks. In: Chiu, M-L.; Tsou, J-Y.; Kvan, T.; Morozumi, M. and Jeng, T-S. eds. Digital Design: research and practice, Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures. Dordrecht, The Netherlands: Kluwer Academic Publishers, pp. 191–201.

Zamenopoulos, Theodore and Alexiou, Katerina (2003). Structuring the plan design process as a coordination problem - the paradigm of distributed learning control coordination. In: Longley, Paul A. and Batty, Michael eds. Advanced Spatial Analysis: The CASA Book of GIS. U.S: ESRI Press, pp. 407–426.

Zhang, Y.; Ganguly, S.; Stelmukh, V.; Fitzpatrick, M. E. and Edwards, L. (2003). Validation of the Contour Method of Residual Stress Measurement in a MIG 2024 Weld by Neutron and Synchrotron X-ray Diffraction. Journal of Neutron Research, 11(4) pp. 181–185.

2002

Borsi, Balazs; Papanek, Gabor and Papaioannou, Theodoros eds. (2002). The Budapest Proceedings of the RECORD Thematic Network: Industry Relationships for Accession States Centres of Excellence in Higher Education. European Commission.

Alevizou, Panagiota (2002). To wire or not to wire? Encyclopaedia Britannica versus Microsoft Encarta. Journal of Educational Technology and Society, 5(1) pp. 163–167.

Bouchard, P. J.; Treimer, W. and Fiori, F. (2002). Characterisation of creep cavitation damage in a stainless steel pressure vessel using small angle neutron scattering. Applied Physics A: Materials Science & Processing, 74(Supplement 1) s1689-s1691.

Buick, J.M.; Kemp, J.; Sharp, D.B.; van Walstijn, M.; Campbell, D.M. and Smith, R.A. (2002). Distinguishing between similar tubular objects using pulse reflectometry: a study of trumpet and cornet leadpipes. Measurement Science and Technology, 13(5) pp. 750–757.

Carlisle, Ysanne and McMillan, Elizabeth (2002). Thinking differently about strategy: comparing paradigms. In: 16th Australian and New Zealand Academy of Management Conference, 4-7 December 2002, Beechworth, Victoria , Australia.

Clark, Norman (2002). Innovation systems, institutional change and the new knowledge market: implications for third world agricultural development. Economics of Innovation and New Technology, 11(4-5) pp. 353–368.

Clark, Norman; Stokes, Kathryn and Mugabe, John (2002). Biotechnology and development: threats and promises for the 21st century. Futures, 34(9-10) pp. 785–806.

Cook, M. B. and Bhamra, T. A. (2002). Evolutionary perspectives on adoption of the eco-service concept. In: Towards Sustainable Product Design 7th International Conference, 28-29 October 2002, London, U.K..

Crompton, Sally; Roy, Robin and Caird, Sally (2002). Household ecological footprinting for active distance learning and challenge of personal lifestyles. International Journal of Sustainability in Higher Education, 3(4) pp. 313–323.

Cross, Nigel (2002). Creative cognition in design: processes of exceptional designers. In: Hewett, Tom and Kavanagh, Terence eds. Creativity and cognition. New York, USA: ACM Press, pp. 14–19.

Cross, Nigel (2002). The nature and nurture of design ability. In: Owen-Jackson, Gwyneth ed. Design and Technology in Secondary Schools. Routledge.

Demaid, A. and Zucker, J. (2002). Message passing between individual and socially acquainted objects in Smalltalk. Knowledge-Based Systems, 15(7) pp. 355–368.

Devai, Katalin; Mensink, Wouter and Papaioannou, Theodoros (2002). University-Industry Links: a panacea for innovation in transition. In: Borsi, Balazs; Papanek, Gabor and Papaioannou, Theodoros eds. Budapest Proceedings of the RECORD Thematic Network: Industry Relatinships for Accession States Centres of Excellence in Higher Education. European Commission, pp. 7–22.

Dewberry, Emma and Fletcher, Katherine (2002). Demi: a case study in design for sustainability. International Journal of Sustainability in Higher Education, 3(1) pp. 38–47.

Dewberry, Emma and Sherwin, Chris (2002). Visioning Sustainability through Design. Greener Management International(37) pp. 125–138.

Dewberry, Emma (2002). Seeing sustainable futures: the potential of design education. In: The Design History Society Situated Knowledges Conference, 3-5 September 2002, Aberystwyth.

Dong, P.; Zhang, J. and Bouchard, P. J. (2002). Effects of repair weld length on residual stress distribution. Journal of Pressure Vessel Technology, 124(1) pp. 74–80.

Earl, C. F. and Eckert, C. M. (2002). The structure of similarity in design. In: Engineering Design Conference (EDC 2002), 9-11 July 2002, London, UK.

Eckert, C. M. and Clarkson, P. J. (2002). Planning design processes in industry: Initial observations. In: Engineering Design Conference (EDC 2002), 9-11 July 2002, London, UK.

Eckert, C. M. and Clarkson, P. J. (2002). Connectivity as a key to supporting design a state-action approach to planning. In: Gero, John S. ed. Artificial Intelligence in Design 02. Norwell, MA, USA: Kluwer Academic Publishers, pp. 479–502.

Eckert, C. M. and Earl, C. F. (2002). Perspectives on similarity in design. In: 7th International Design Conference (Design 2002), 14-17 May 2002, Dubrovnik, Croatia.

Eckert, Claudia; Stacey, M. K. and Wiley, J. (2002). Expertise and Creativity in Knitwear Design. International Journal of New Product Development and Innovation Management, 4(1) pp. 49–64.

Enoch, Marcus and Potter, Stephen (2002). Marketing the British bus industry. Proceedings of the Institution of Civil Engineers - Municipal engineer, 151(1) pp. 49–55.

Fitzpatrick, M. E.; Moffatt, J. E.; Dubois, A.; Gregoire, F. and Tarrant, A. D (2002). Influence of heat treatment processes on fatigue performance of particle reinforced aluminium alloys. Materials Science and Technology, 18(12) pp. 1453–1457.

Fitzpatrick, M. E.; Withers, P. J.; Baczmanski, A.; Hutchings, M.T.; Levy, R.; Ceretti, M. and Lodini, A. (2002). Changes in the misfit stresses in an Al/SiCp metal matrix composite under plastic strain. Acta Materialia, 50(5) pp. 1031–1040.