The Open UniversitySkip to content
 

Anisotropic Elastic Constants Calculation of Stainless Steel Cladded Layers of Pressure Vessel Steel Plate

Xue, Jilin; Bouchard, John; Chen, Xuedong; Fan, Zhichao and Zhou, Yu (2019). Anisotropic Elastic Constants Calculation of Stainless Steel Cladded Layers of Pressure Vessel Steel Plate. Key Engineering Materials, 795 pp. 215–222.

DOI (Digital Object Identifier) Link: https://doi.org/10.4028/www.scientific.net/KEM.795.215
Google Scholar: Look up in Google Scholar

Abstract

Cladding stainless steel layer on the inner surface of ferrite pressure vessel is a common method to improve the corrosion resistance and save the economic cost. However, the movement of heat source and temperature gradient in the process of cladded welding will lead to the anisotropy of cladded layer material. When measuring the residual stress of pressure vessel steel plate with stainless steel cladded layers by contour method, it is necessary to know the elastic mechanical properties of stainless steel cladded layers accurately. The assumption of transversely isotropy was employed, and the relationship between the material compliance matrix and the elastic modulus of transversely isotropic material was utilized. Based on the elastic modulus of each cladded layer and the whole steel plate from the longitudinal direction (0°) until the transverse direction (90°) measured by the experiment, the independent constants S11, S13, S33 and S44 in the compliance matrix of each cladded layer and the whole steel plate were obtained by regression analysis method. Furthermore, by using the relationship between the independent constants of the stiffness matrix of the transversely isotropic material and the single crystal material, the independent constants S12 in the compliance matrix of each stainless steel cladded layer and the whole steel plate were obtained. And then the independent constants of the stiffness matrix of each cladded layer and the whole steel plate were acquired. Hence, a method for calculating the anisotropic elastic constants of the stainless steel cladded layer and the whole steel plate was proposed. The results will provide material data support for measuring residual stress of pressure vessel steel plate with stainless steel cladded layers by contour method.

Item Type: Journal Item
Copyright Holders: 2019 Trans Tech Publications
ISSN: 1662-9795
Project Funding Details:
Funded Project NameProject IDFunding Body
GMRI Visiting Fellowship51605132National Natural Science Foundation of China
Keywords: pressure vessel; stainless steel cladded layer; anisotropy; elastic constants
Academic Unit/School: Faculty of Science, Technology, Engineering and Mathematics (STEM) > Engineering and Innovation
Faculty of Science, Technology, Engineering and Mathematics (STEM)
Item ID: 60506
Depositing User: P. John Bouchard
Date Deposited: 24 Apr 2019 09:45
Last Modified: 08 May 2019 16:21
URI: http://oro.open.ac.uk/id/eprint/60506
Share this page:

Metrics

Altmetrics from Altmetric

Citations from Dimensions

Actions (login may be required)

Policies | Disclaimer

© The Open University   contact the OU